LTC 8900 Series Allegiant Matrix/Control Systems

Video | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
LTC 8900 Series Allegiant Matrix/Control
Systems - Modular
www.boschsecurity.com
The LTC 8900 Series Allegiant Video Switcher/Control
Systems are powerful full matrix switchers, capable of
displaying video from any camera on any monitor,
either manually or via independent automatic
switching sequences. By using the LTC 8901 Series
CPU and the LTC 8943 series PC, the standard system
can be enhanced to include dual/redundant CPU/
Power supply with automatic hot-switchover
capabilities.
Functions
General Construction
The LTC 8900 Series provides versatile modular
construction accommodating up to 4096 camera
inputs, 512 monitor outputs, 120 keyboards, 1024
alarm points, and a computer interface port. The
robust design utilizes a separate CPU bay with its own
power supply.
Dual/Redundant System
For situations where complete system failure cannot
be tolerated, we offer the dual redundant LTC 8901
CPU. This CPU unit incorporates a secondary CPU/
power supply. In the event of a primary CPU or power
u
4096 Camera by 512 monitor switching
u
Modular construction
u
Powerful alarm handling capabilities
u
SalvoSwitching and SatelliteSwitch capability
u
Includes Windows-based configuration software
supply failure, the system switches over automatically
to the backup CPU or power supply. The system uses
an independent PC that continuously monitors the
CPUs for failure and performs a hot-switchover if
needed. You can also manually change CPUs using the
preloaded software or via a front panel slide switch.
Sequencing Capabilities
These systems can be programmed with up to 256
sequences, which can be run independently of each
other in either a forward or reverse direction. Any of
the sequences can utilize the SalvoSwitching
capability, where any number of system monitors may
be selected to switch as a group. Using the supplied
software, sequences can automatically activate and
deactivate based upon the day or the time of day.
Camera Control
The LTC 8900 Series support variable speed operation
and full programming access for AutoDome and
AutoDome Easy II Series cameras. In addition, on-site
receiver/drivers are available to provide operator
control of pan, tilt, zoom, pre-positions, auxiliaries,
2 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
auto-pan, and random scan functions when used with
conventional pan/tilt devices. An integral local test
function is also a standard feature.
The LTC 8900 Series include an impressive user-based
priority system and a series of programmable lockout
tables to limit operator access of remotely controlled
devices. Operators can restrict control from lower
priority operators either manually or automatically.
When enabled to operate automatically, a built-in timeout period is user programmable.
Bilinx Capability
When combined with an LTC 8016 Allegiant Bilinx Data
Interface unit, these switcher/controllers support
operations using Bilinx communication. With Bilinx,
PTZ control is accomplished using a bidirectional
communication protocol embedded in the video signal
of Bosch Dinion®, AutoDome, and AutoDome Easy II
CCTV cameras. In addition, Bilinx uses the standard
video cable to transmit alarm and status messages
from the cameras, providing superior performance
without the need for separate data transmission
cables.
Macro Capabilities
The LTC 8900 system provides powerful macro
capabilities. Macros can be activated using Allegiant
Series system keyboards, timed event functions, and
alarm activations.
Alarm Capabilities
The LTC 8540/00 alarm interface unit allows external
contact closure or logic level input to automatically
display cameras on a monitor or group of monitors.
The supplied PC software includes the ability to
combine multiple alarm operating modes within the
same system. Alarm video may be selected to reset
either manually or automatically. In addition, one can
customize a 16-character alarm titles to designate the
specific alarm condition.
System Operation
System operation and programming is accomplished
using a full-function, ergonomically designed keyboard.
Up to 120 keyboards may be used in the system. Builtin operator priority levels and the ability to restrict
certain operators from controlling designated
functions provide maximum flexibility.
Programming/Software Capabilities
The LTC 8900 Series includes a black outlined 48character on-screen display for time/date, camera
number, camera ID (16 or 40 characters), and monitor
(12 characters) or status information. A user
selectable option provides the ability to display a third
line of on-screen text. This third line can be configured
to display up to 24 additional camera title characters
(40 characters total) or a 12-character monitor title.
The on-screen display is also user selectable to
operate in "6-digit Camera ID" mode. When enabled, 2digit "site numbers" are displayed in addition to the 4digit camera number. The 2-digit site number feature
is especially useful when groups of cameras are
located in separate buildings, floors, or other common
areas.
Over 1,000 characters covering a multitude of
languages, (including several hundred Chinese
symbols) are available to help program camera ID and
monitor titles. Using the supplied PC software,
enhanced programming and switching features can be
obtained. A user friendly spreadsheet format allows
one to easily enter/change camera titles, operator
names, timed events (128), system parameters,
camera sequences, lockouts, and advanced alarm
response programming. The software also provides the
ability to enable an on-screen indicator for easy
identification of controllable cameras. Another useful
feature of the software is its ability to store or print (in
real-time) programming information, system events,
alarms, switching functions, sequence events,
keyboard actions, and video loss information.
Expansion Capabilities
The LTC 8900 Series can serve as the Master or Slave
Switcher in a SatelliteSwitch® configuration. This
innovative SatelliteSwitch feature enables a single
LTC 8900 system to communicate with remotely
located Satellite systems. Any Allegiant system can
serve as a remote Satellite Switcher. This powerful
feature permits the design of large distributed type
systems. The main control site can view and control
local cameras as well as cameras located at any of the
remotely distributed Satellite sites. The Satellite sites
can view and control only cameras associated with
their local site. When used in this type of
configuration, the main LTC 8900 system can access
up to 256 Satellite sites.
Certifications and approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and
CE regulations
Product Safety
Complies with CE regulations, UL, CSA, EN,
and IEC Standards
3 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
Installation/configuration notes
LTC 8901
LTC 8943 PC
LTC 8944
LTC 8901
LTC 8945
LTC 8808
LTC 8944
LTC 8945
LTC 8902
LTC 8808
LTC 8902
LTC 8808
LTC 8902
LTC 8903
LTC 8902
LTC 8903
LTC 8808
LTC 8903
LTC 8903
LTC 8808
LTC 8808
Typical Diagram of LTC 8901 Series Redundant System
Configuration (256 Cameras by 128 Monitors)
Typical Diagram of LTC 8904 Series System
Configuration (256 Cameras by 128 Monitors)
1
Main CPU Bay
1
Main CPU Bay
2
LAN Data Lines
2
LAN Data Lines
3
LTC 8809 Cables
3
LTC 8809 Cables
4
Video Output Bay
4
Video Output Bay
5
Video Input Bay
5
Video Input Bay
6
Camera
6
Camera
7
Monitors
7
Monitors
8
Keyboards
8
Keyboards
9
PC
9
User PC
4 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
1
6
LTC 8905 3 LTC 8910 5
2 LTC 8910 4 LTC 8905
2
LTC 8944
LTC 8945
LTC 8946
5
LTC 8808
4
5
5
LTC 8808
LTC 8901 8
LTC 8808
LTC 8808
6
7
7
7
LTC 8808 10 LTC 8808 10 LTC 8808 10 LTC 8808 10
LTC 8809
LTC 8809
LTC 8809
LTC 8809
9
5
6
6
7
8902
LTC 8808
7
11
LTC 8809 6
1-64
8902
LTC 8808
8
11
8902
65-128
LTC 8809 6
LTC 8808
11
8
8902
LTC 8808
129-192
LTC 8809 6
11
8902
8
LTC 8808
8
193-256
11
10
8902
LTC 8808
11
BOSCH
Prod
8902
BOSCH
Prod
Mon
Clr
Shot
Mon
Clr
Shot
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
0
LTC 8808
0
BOSCH
Prod
BOSCH
Prod
Mon
Clr
Shot
Shot
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
0
11
Mon
Clr
1
8902
0
LTC 8808
9
11
Typical Diagram of LTC 8901 Series Redundant System
Configuration (1024 Cameras by 256 Monitors)
1
PC Running Configuration, Redundancy, and Data Mirroring
Software
2
Main CPU Bay
3
Cameras
12
BOSCH
Prod
Shot
1
7
7
0
6
Coax Ribbon Cables
7
LAN Data Lines to all Bays
8
To Monitors
9
Up to 120 System Keyboards (Using LTC 8714 and LTC 8715
Series Port Expanders)
1
0
Up to 512 System Monitors
7
7
BOSCH
Prod
7
BOSCH
Prod
7
BOSCH
Prod
7
BOSCH
Prod
7
BOSCH
Prod
7
BOSCH
Prod
7
BOSCH
Prod
7
BOSCH
Prod
7
BOSCH
Prod
3
2
4
9
8
7
6
5
9
8
0
BOSCH
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
Mon
Clr
3
2
4
9
BOSCH
Prod
Shot
1
6
8
Prod
Shot
Mon
Clr
3
5
0
BOSCH
Mon
Clr
BOSCH
Prod
Mon
Clr
Shot
Shot
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
0
0
0
BOSCH
Prod
Mon
Shot
1
2
4
5
7
8
6
9
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Clr
Shot
Shot
1
2
4
5
7
8
6
9
Shot
Shot
1
2
4
5
7
8
3
6
BOSCH
Prod
Mon
Clr
Shot
Mon
Clr
Shot
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
4
5
6
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
7
8
9
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
120
9
0
BOSCH
Prod
Mon
Clr
Mon
Clr
3
0
BOSCH
Prod
Mon
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
Mon
0
BOSCH
Prod
Mon
Clr
3
0
BOSCH
Prod
0
BOSCH
Prod
Mon
Clr
3
0
Mon
0
BOSCH
Prod
Mon
Clr
3
BOSCH
Prod
0
13
Mon
Clr
1
6
8
BOSCH
Video Panels
7
BOSCH
Prod
Mon
2
4
9
8
Prod
Shot
Shot
1
6
5
0
BOSCH
Mon
Clr
3
5
7
Prod
5
7
Clr
3
2
4
9
BOSCH
Prod
Shot
1
6
8
Prod
Shot
Mon
Clr
3
5
0
BOSCH
Mon
Clr
2
4
0
LAN Switchers
7
BOSCH
Prod
Mon
2
4
9
8
Prod
Mon
Shot
Shot
1
6
5
0
BOSCH
Prod
1
Clr
4
BOSCH
Prod
Clr
3
2
4
9
8
Shot
1
6
5
Mon
Clr
3
2
4
BOSCH
Prod
Mon
Clr
Clr
0
Typical Diagram of LTC 8901 Series Redundant System
Configuration (4096 Cameras by 512 Monitors)
1
PC Running Configuration Software
2
Main Power Supply
3
Main CPU Module
4
Backup CPU Module
5
Backup Power Supply
6
Cameras
7
Video Panels
8
Main CPU Bay
9
LAN Switches
1
0
Coax Ribbon Cables
1
1
To Monitors
1
2
Up to 512 System Monitors
1
3
UP to 120 System Keyboards (Using LTC 8714 and LTC 8715
Series Port Expanders)
5 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
1
2
7
3
4
8
5
6
BOSCH
Prod
Mon
Clr
9
Shot
1
2
3
4
5
6
7
8
9
10
12
14
16
15
18
17
20
19
21
22
24
BOSCH
Prod
Mon
Clr
25
Data Converter Unit
2
2
To any Local Pan/Tilt/Zoom Camera Sites
2
3
Code Merger Unit
2
4
Alarm Interface Unit
2
5
Local Pan/Tilt/Zoom Control Data Line
2
6
Alarm Inputs Activate only Local Video on Local Monitors
2
7
Allegiant Keyboard Controls any of the Local Cameras on any of
the Local Monitors (Video and Pan/Tilt/Zoom)
0
10
13
2
1
23
Shot
1
2
3
4
5
6
7
8
9
0
26
27
Allegiant Satellite Switching System
Technical specifications
LTC 8900 Series System Specifications
1
Monitor Outputs
2
Alarm Interface Unit
Capacities
3
Pan/Tilt/Zoom and Satellite Control Data
Video Inputs
4
Allegiant Main CPU Bay
Standard
4096
5
Alarm Inputs May Activate Either Local or Satellite Video Main
Control Center’s Monitor
Satellite Configuration
6144
6
Local Camera Video
7
Inputs Used for both Local and Trunk Lines
8
Signal Distribution Unit
9
To any Local Pan/Tilt/Zoom Camera Sites
1
0
Up to 1.5 km (5000 ft) using 1 sq mm (18 AWG) Shielded Twisted
Pair (Belden 8760 or Equivalent)
1
1
Allegiant Keyboard Controls any Local or Remote Camera on any
Local Monitor (Video and Pan/Tilt/Zoom)
Electrical
1
2
Multiple Video Trunk Lines from each Remote Satellite Location
Input Voltage Level
0.5 Vp-p to 2 Vp-p
(composite negative sync)
1
3
One Line to Each Remote Satellite System Location
Gain
Unity ± 2%
(75 Ohm terminated)
1
4
Pan/Tilt/Zoom and Satellite Control Data
Pulse/Bar Ratios1
Min.
Nom.
Max.
94%
98%
106%
1
5
Monitor Outputs used as Video Trunk Lines to Main Control Site
Min.
Nom.
Max.
1
6
Video Trunk Lines from other Satellite Locations
0.2%
2.5%
Min.
Nom.
Max.
1
7
Any Model Allegiant Main Bay
96
98
104
1
8
Local Monitor
Min.
Nom.
Max.
36%
39%
44%
1
9
Console Port Input
2
0
Satellite Data Line
Video Outputs
512
Keyboards
120
Alarm Inputs
1024
Receiver/Drivers
Standard
4096
Satellite Configuration
6144
2T Pulse K Factor
1
Bar Amplitude (IRE) 1
Sync Amplitude (% Bar) 1
Field Time Waveform Distortion
2% maximum
Line Time Waveform Distortion1
1% maximum
Short Time Waveform Distortion1
2% maximum
1
6 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
Long Time Waveform Distortion1
0.8% maximum
Electrical
Video Bandwidth (-3 dB)
17 MHz
Model No.
Frequency Response
± 0.5 dB to 11 MHz
Signal-to-Noise-Ratio1
70 dB at 3.58 MHz unified
unweighted minimum
Crosstalk (at 3.58 MHz)
Typical: –65 dB,
Adjacent channel: –45 dB
(typical)
Hum
60 dB below the composite
1 Vp-p video signal from 60 Hz
to 6 MHz
Differential Gain1
Min.
Differential Phase1
Nom.
Max.
0.6%
2%
Nom.
Max.
0.6°
1.3°
Min.
Nom.
Max.
94%
100%
109%
Min.
Nom.
Max.
–33 ns
+3 ns
+33 ns
Min.
Nom.
Max.
0.3%
4%
Min.
Chrominance Luminance Gain
Chrominance Luminance Delay1
Luminance Nonlinearity1
Switching
Crosspoint matrix
DC Output
0V
Transient Protection
(VIM Cards)
350 W Peak Pulse Power
(tp = 8/20 µs
1 Meets EIA/TIA - 250C Medium Haul Standard for 1024 cameras x 64 monitors.
Environmental
Temperature
Rated Voltage
Voltage
Range
Nominal
Power2
LTC 8904/60
120 VAC, 50/60 Hz
100 to 140
30 W
LTC 8904/50
220–240 VAC,
50/60 Hz
198 to 264
30 W
2 Power at rated voltage fully loaded.
Connectors
Controller Port
9-pin D-type RS-232 port for an external PC or
computing device (default = 115,200 baud)
Console
9-pin D-type RS-232 port for an external
computer or a computing device (default =
19,200 baud)
Alarm
9-pin D-type RS-232 port for an Allegiant alarm
accessory unit (default = 19,200 baud)
Bi-Phase
9-pin D-type TTL level, high-speed control data
output (BiPhase) for interface to an Allegiant
series signal distribution units (data clock rate =
31.25 kHz)
COM Ports
Two 9-pin D-type RS-485 ports for an external
Allegiant accessory use
Keyboards
Eight (8), 6-pin RS-485 ports for an Allegiant
keyboard use (default = 9600 baud)
LAN
RJ-45 high-speed LAN port for interface to
LTC 8902 Series and LTC 8903 Series bays via
LTC 8946 Series LAN switches
Components
Equipment Rack
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
440 x 394 x 86 mm (17.3 x 15.5 x 3.4 in.)
Weight
7.2 kg (15.85 lb)
Construction
Metal case with plastic panel
Finish
Charcoal
Operating
4°C to 50°C (40°F to 122°F)
Storage
–40°C to 60°C (–40°F to 140°F)
Altitude
4500 m (15,000 ft)
Humidity
0 to 95 % relative, non-condensing
Dimensions
(D x H)
300 x 250 mm
(11.8 x 9.8 in.)
Vibration
3 g swept sine wave, 15 Hz to 2000 Hz
Weight
0.5 kg (1.1 lb)
Shock
50 g, 11 m/s, ½ sine wave
Microprocessor Module (LTC 8910/01)
Power Supply (One-LTC 8905/90)
LTC 8904 CPU Equipment Bay
The LTC 8904/60 and LTC 8904/50 include the equipment rack,
LTC 8910/01 microprocessor module, LTC 8905/90 power supply, and
LTC 8917/00 relay module.
Relay Module (LTC 8917/00)
Dimensions
(D x H)
300 x 250 mm
(11.8 x 9.8 in.)
Front Panel Indicators
Power, CPU activity
7 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
LTC 8901 Series CPU Equipment Bay
Relay Module (LTC 8917/00)
The LTC 8901/60 and LTC 8901/50 include the equipment rack, dual
LTC 8910/01 microprocessor modules, dual LTC 8905/90 power
supplies, and one LTC 8917/00 relay module.
Dimensions
(D x H)
Electrical
Model No.
Rated Voltage
Voltage
Range
Nominal
Power3
LTC
8901/60
120 VAC,
50/60 Hz
100 to
140
30 W
LTC
8901/50
220–240 VAC,
50/60 Hz
198 to
264
30 W
3 Power at rated voltage fully loaded.
Connectors
Controller Ports
Two (2), RS-232 ports for an LTC 8943 PC
controller interface (default = 115,200 baud)
Console
RS-232 port for an external computer or a
computing device (default = 19,200 baud)
Alarm
RS-232 port for an Allegiant alarm accessory unit
(default = 19,200 baud)
Switch Ctrl
Digital interface port for the LTC 8943 PC
controller
Bi-Phase
TTL level, hi-speed control data output
(Bi-Phase) for interface to an Allegiant series
signal distribution units
(data clock rate = 31.25 kHz)
300 x 250 mm
(11.8 x 9.8 in.)
Front Panel Indicators
LTC 8901
Primary power
Primary fault
Back-up power
Back-up fault
Primary CPU in-use
Controller activity
Back-up CPU in-use
Auto-select mode
Primary CPU activity
Fault buzzer
Back-up CPU activity
LTC 8904
Power
CPU Activity
Rear Panel Indicators
Relay outputs4
Primary CPU fault
Back-up power supply failure
Back-up CPU fault
Any failure
Primary power supply failure
4 Relay Contacts: 24 VAC, 40 V peak, 1 A.
LTC 8902 Series Monitor Output Bays
COM Ports
Two (2), RS-485 port for an external Allegiant
accessory use
The LTC 8902/60 and LTC 8902/50 include the equipment rack,
LTC 8916/01 data receiver module, and LTC 8906 Series power
supply.
Keyboards
Eight (8), 6-pin RS-485 ports for an Allegiant
keyboard use (default = 9600 baud)
Electrical
LAN
Two RJ-45 high-speed LAN ports for interface to
LTC 8902 Series and LTC 8903 Series bays via
LTC 8944 Series and LTC 8945 Series LAN
Switches
Components
Model No.
Rated Voltage
Voltage
Range
Nominal
Power5
LTC 8902/60
120 VAC, 50/60 Hz
100 to 140
160 W
LTC 8902/50
220–240 VAC,
50/60 Hz
198 to 264
160 W
5 Power at rated voltage fully loaded.
Equipment Rack
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
440 x 394 x 86 mm (17.3 x 15.5 x 3.4 in.)
Weight
8 kg (17.6 lb)
Construction
Metal case with plastic panel
Finish
Charcoal
Microprocessor Modules (Two–LTC 8910/01)
Dimensions
(D x H)
300 x 250 mm
(11.8 x 9.8 in.)
Weight
0.5 kg (1.1 lb)
Power Supplies (Two–LTC 8905/90)
Connectors
Video Outputs
Four (4), 34-pin ribbon connectors used in
conjunction with the LTC 8808/00 video
interconnect panel
Video Bus
Connections
Sixteen (16), 34-pin ribbon connectors interconnect
with LTC 8903 Series Camera Input bays using
LTC 8809/00 ribbon cables
Console
Port reserved for future use
COM 1
Port reserved for future use
COM 2
Port reserved for future use
8 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
EXT Sync
BNC input used to synchronize the unit to an external
sync signal. Accepts composite video, composite
sync, or the V Sync output provided from another
LTC 8900 Series matrix bay
V Sync
BNC connector provides an output signal to
synchronize an additional LTC 8900 Series matrix
bay via its EXT Sync input
External Data
Interface
Two (2), RJ-45 high-speed LAN ports for interface to
the LTC 8901 Main CPU bay via system LAN
Switches. (Connected in parallel; one is used, one is
reserved for future use)
Components
Video Bus
Connections
Four (4), 34-pin ribbon connectors interconnect
with LTC 8903 Series camera input bays using
LTC 8809/00 ribbon cables
Console
Port reserved for future use
COM 1
Port reserved for future use
COM 2
Port reserved for future use
EXT SYNC
BNC input used to synchronize unit to external
sync signal; accepts composite video, composite
sync, or the V Sync output provided from another
LTC 8900 Series matrix bay
V SYNC
BNC connector provides output signal to
synchronize an additional LTC 8900 Series matrix
bay via its EXT Sync input
External Data
Interface
Two (2), RJ-45 high-speed LAN ports for
interface to LTC 8901 main CPU bay via system
LAN Switches (Connected in parallel; one is used,
one is reserved for future use)
Equipment Rack
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight
11.1 kg (24.5 lb)
Construction
Metal cabinet
Finish
Charcoal
Components
Equipment Rack
Data Receiver Module (LTC 8916/01)
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight
11.1 kg (24.5 lb)
Construction
Metal cabinet
Power Supply (LTC 8906/60 or LTC 8906/50)
Finish
Charcoal
Dimensions
(W x D x H)
67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Data Receiver Module (LTC 8918/01)
Weight
5.2 kg (11.5 lb)
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Indicators
Power On/Off and fuse alert LEDs
Weight
0.5 kg (1.1 lb)
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 420 x 267 mm (19 x 16.5 x 10.5 in.)
Weight
0.5 kg (1.1 lb)
LTC 8903 Series Camera Input Bays
Power Supply (LTC 8805/60 or LTC 8805/50)
The LTC 8903/60 and LTC 8903/50 include the equipment rack,
LTC 8918/01 data receiver module, and LTC 8805 Series power
supply.
Electrical
Model No.
Rated Voltage
Voltage
Range
Nominal
Power6
LTC 8903/60
120 VAC,
50/60 Hz
100 to 140
85 W
LTC 8903/50
220–240 VAC,
50/60 Hz
198 to 264
85 W
6 Power at rated voltage fully loaded.
Connectors
Video Inputs
Looping Video
Input
Connections
Sixteen (16), 34-pin ribbon connectors used in
conjunction with the LTC 8808/00 video
interconnect panel
Sixteen (16), 34-pin ribbon connectors used with
LTC 8809/00 ribbon cables (supplied as required
to loop to additional LTC 8903 Series bays)
Size
(W x D x H)
67 x 360 x 247 mm (2.63 x 14.2 x 9.7 in.)
Weight
5.2 kg (11.5 lb)
Indicators
Power On/Off and fuse alert LEDs
LTC 8921/00 Video Input Module
Use up to sixteen per LTC 8903 Series camera input bays.
Camera Inputs
32
Size
(D x H)
300 x 250 mm (11.8 x 9.8 in.)
Weight
0.41 kg (0.9 lb)
LTC 8934/00 Video Output Module
Use up to eight per LTC 8902 Series monitor output bays.
Monitor Outputs
8
9 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
Dimensions
(D x H)
300 x 250 mm (11.8 x 9.8 in.)
Weight
0.41 kg (0.9 lb)
LTC 8941/91 System Controller
(Redundant System Configurations Only)
Includes LTC 8943/94 PC, LTC 8944/93 Primary LAN Switch and
LTC 8945/93 Backup LAN Switch
LTC 8943/94 PC
Rack-mount industrial-grade Pentium PC,
512 MB RAM (minimum), 8 GB solid state hard
drive (minimum), CD-/DVD burner, floppy drive,
keyboard, mouse, keyboard/mouse rack-mount
shelf, and Windows XP Professional;
120/230 VAC, 50/60 Hz
LTC 8059/00
Allegiant Master Control software (installed on
PC)
Monitor
(UML-191-90)
48.3 cm (19 in.) LCD panel
120/230 VAC, 50/60 Hz
Monitor Rack
(UMM-LCDUBRM)
Racked Height: 37.4 cm (14.7 in.)
Racked Width: 48.3 cm (19.0 in.)
LTC 8944/93
Primary LAN
Switch
24-port 10/100Base-T Ethernet Switch with
SNMP Module, programmed with primary IP
Address; 120/220 VAC, 50/60 Hz
LTC 8945/93
Back-Up LAN
Switch
24-port 10/100Base-T Ethernet Switch with
SNMP Module, programmed with back-up IP
Address; 120/220 VAC, 50/60 Hz
Allegiant Accessories
The LTC 8900 Series accessory products provide many optional
features to the base Allegiant switching systems. Accessory products
include keyboard extension kits, Allegiant Bilinx Data Interface unit,
receiver/driver units, switcher/followers, code merger units, video
ribbon cables, and keyboard expansion units. All accessory products are
designed to be installer-friendly and compatible throughout the Allegiant
series systems. See the Allegiant Accessories datasheet.
Ordering information
LTC 8901/50 Allegiant Dual CPU Bay
Dual CPU bay, 230 VAC
Order number LTC 8901/50
LTC 8901/60 Allegiant Dual CPU Bay
Dual CPU bay, 120 VAC
Order number LTC 8901/60
LTC 8902/50 Allegiant Monitor Bay
Monitor bay, 230 VAC
Order number LTC 8902/50
LTC 8902/60 Allegiant Monitor Bay
Monitor bay, 120 VAC
Order number LTC 8902/60
LTC 8903/50 Allegiant Camera Bay
Camera bay, 230 VAC
Order number LTC 8903/50
LTC 8903/60 Allegiant Camera Bay
Camera bay, 120 VAC
LTC 8946/93 Expansion LAN Switch
Order number LTC 8903/60
24-port 10/100BaseT Ethernet Switch, no SNMP module;
120/220 VAC, 50/60 Hz
CPU bay, 230 VAC
LTC 8808/00 Video Interconnect Panel
The LTC 8808/00 assembly contains an interconnect panel which is
used to convert 32 BNC connectors into two 16-channel ribbon cable
connectors. The two (2) coaxial ribbon cables (LTC 8809/00), designed
especially for use with video signals, and are then used to interconnect
the video between the panel and the LTC 8900 system. Use of the
LTC 8808/00 assemblies are required for all external video input and
output connections. In addition to being used for video inputs and
monitor outputs, the LTC 8808/00 assembly is also used to provide
looping capability. One (1) LTC 8808/00 (includes panel and two
ribbon cables) is required for each group of 32 system cameras or 32
monitors.
Dimensions
(W x D x H)
EIA 48 cm (19 in.) rack,
483 x 42 x 44 mm (19 x 1.65 x 1.75 in.)
LTC 8904/50 Allegiant CPU Bay
Order number LTC 8904/50
LTC 8904/60 Allegiant CPU Bay
CPU bay, 120 VAC
Order number LTC 8904/60
LTC 8905/90 Power Supply
for LTC 8901 and LTC 8904 Series, 120/240 VAC
Order number LTC 8905/90
LTC 8906/50 Power Supply
for LTC 8902/50, 230 VAC
Order number LTC 8906/50
LTC 8906/60 Power Supply
for LTC 8902/60, 120 VAC
Order number LTC 8906/60
Weight
• Panel
0.54 kg (1.2 lb)
• Ribbon
Cables
Two (2), 0.3 kg (0.7 lb)
Construction
Metal
Finish
Charcoal
LTC 8910/01 CPU Module
CPU module for LTC 8901 and LTC 8904 Series
Order number LTC 8910/01
LTC 8916/01 Data Receiving Module
for LTC 8902 Series
Order number LTC 8916/01
10 | LTC 8900 Series Allegiant Matrix/Control Systems - Modular
LTC 8917/00 Relay Module
for LTC 8901 Series
Order number LTC 8917/00
LTC 8918/01 Data Receiving Module
for LTC 8903 series
Order number LTC 8918/01
LTC 8921/00 Video Input Module
for LTC 8900 Series
Order number LTC 8921/00
LTC 8934/00 Video Output Module
for LTC 8900 Series
Order number LTC 8934/00
LTC 8934/00-75 VOM
LTC 8900 VOM with Korean characters
Order number LTC 8934/00-75
LTC 8941/91 PC/Monitor/LAN/Software Package
for LTC 8901 Series
Order number LTC 8941/91
LTC 8944/92 Programmed 12-port Primary LAN
Order number LTC 8944/92
LTC 8945/92 Programmed 12-port Backup LAN
Order number LTC 8945/92
LTC 8946/92 Basic 12-port Expansion LAN
Order number LTC 8946/92
LTC 8059/00 Allegiant Master Control Software
Order number LTC 8059/00
Accessories
LTC 8944/93 Programmed 24-port Primary LAN Switch
Order number LTC 8944/93
LTC 8945/93 Programmed 24-port Backup LAN Switch
Order number LTC 8945/93
LTC 8946/93 Basic 24-port Expansion LAN Switch
Order number LTC 8946/93
Software Options
SFT-VASA Hybrid IP - Analog/Matrix Video over IP Integration Software
Order number SFT-VASA
SFT‑INTSRV Integration Server Software
Allegiant integration software package
Order number SFT-INTSRV
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2015 | Data subject to change without notice
2368439691 | en, V2, 09. Feb 2015
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
latam.boschsecurity@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com