4-Port USB Extender over LAN Quick Start Guide

IC408A
February
2010
MT1000A-85-R4
4-Port USB Extender over LAN Quick Start Guide
Extend all USB 2.0 devices to hosts across a Gigabit Ethernet Local Area Network (LAN)
using existing cabling.
BLACK BOX
®
Network Connect
1 P lace the Local Extender where desired and connect the
CAT5e patch cable from the Link port (RJ-45) to a network
switch or wall network port connected to a switch.
2C
onnect the Local Extender to the computer using the
included USB cable.
Computer
Maximum 330 ft. (100 m)
between network devices
3 P lace1the Remote Extender where desired. Connect the
CAT5e patch cable from the Link port (RJ-45) to a network
switch or wall network port connected to a switch and
connect the Remote Extender to a power source.
4 Attach the USB device(s) to the Remote Extender.
Maximum 330 ft. (100 m)
between network devices
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Direct Connect
1 P lace the extenders where desired and connect the CAT5e
extension link cabling to the Link ports (RJ-45) on the Local
and Remote Extenders.
2 C
onnect the Local Extender to the computer using the
included USB cable.
Computer
Maximum 330 ft. (100 m)
between devices
3 C
onnect the Remote Extender to the AC adapter and a
power source.
4 Attach the USB device(s) to the Remote Extender.
© Copyright 2013. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any third-party
trademarks appearing in this manual are acknowledged to be the property of their respective owners.
IC408A Quick Start Guide, version 1
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com