High
Efficiency
Wood
Furnace
Phase 2 Qualifi
ed model
models that
s are cleane
have not
r and pollute
met this
been associ
emission
less than
ated with
level. Expos
those
respiratory
Models that
ure to smoke
illness
have lower
has
smoke emissi and other health
problems.
ons may
reduce your
risk.
0.31
THIS MODEL
MANUFACTURER
MODEL NUMBER :
8-HOUR OUTPUT :
RATING:
AVERAGE
EFFICIENCY:
PARTICLE
EMISSIONS:
Pro-Fab Industrie
s Inc.
400
177,333 BTU/HR
78.9% (using
90.2% (using higher heating value)
lower heating
6.10 GRAMS/
value)
13.6 GRAMS/ HR (average)
0.20 LBS/MIL HR (maximum test
run)
LION BTU
0.31 LBS/MIL
INPUT
LION BTU
EPA has determi
0.06 GRAMS/
OUTPUT
HR/10,000
model qualifies ned, based on
BTU OUTPUT
testing by
at the Phase
an
accredited
2 emissio
independent
ns level for
laboratory,
U.S. EPA’s
that this
Voluntary
Program.
EPA WHITE
TAG QUALIFIED
•UP TO 90% EFFICIENCY
•CUT FUEL REQUIREMENTS IN HALF
PATENT PENDING
•INDOOR/OUTDOOR INSTALLATION
•LOW EMISSIONS
•EPA WHITE TAG QUALIFIED
•DUAL HOOKUP
•GASIFICATION TECHNOLOGY
•SIMPLE CLEANING
The Empyre Pro Series is leading the way in new
patent pending high efficiency clean burning
heating technology. For you, this efficiency
means savings all around. The Empyre Pro Series
burns cordwood, a renewable resource and easily
accessible in many areas; the Empyre Pro Series
makes splitting wood obsolete. With the newly
designed, smaller firebox requiring less wood, it
maintains burn times comparable to conventional
outdoor furnaces at the same heat output.
PRO-FAB
Clean burning means the furnace does most of
the work. Ash cleanup is virtually non existent
with the Empyre Pro Series. The built-in cleaning
portals makes brushing out fly ash from the
gasification chamber and flues a quick and simple
process. The superior heat of the gasification
process eliminates buildup in the chimney and
reduces moisture, preventing rust.
Emissions
Phase 2 Qualified models are cleaner and pollute less than those
models that have not met this emission level. Exposure to smoke has
been associated with respiratory illness and other health problems.
Models that have lower smoke emissions may reduce your risk.
White Tag qualified hydronic
boilers reduce emissions by more
than 90% over conventional wood
furnaces. The Empyre Pro Series
emission levels are well below
EPA standards, protecting the
environment for a greener future!
330,000 BTU HEAT
OUTPUT!
0.31
THIS MODEL
MANUFACTURER:
MODEL NUMBER:
8-HOUR OUTPUT RATING:
AVERAGE EFFICIENCY:
PARTICLE EMISSIONS:
Pro-Fab Industries Inc.
400
177,333 BTU/HR
78.9% (using higher heating value)
90.2% (using lower heating value)
6.10 GRAMS/HR (average)
13.6 GRAMS/HR (maximum test run)
0.20 LBS/MILLION BTU INPUT
0.31 LBS/MILLION BTU OUTPUT
0.06 GRAMS/HR/10,000 BTU OUTPUT
EPA has determined, based on testing by an accredited independent laboratory, that this
model qualifies at the Phase 2 emissions level for U.S. EPA’s Voluntary Program.
EPA 8 hour output rating test based on 10 lbs of wood/
cubic foot of firebox, which means that this rating is
based on a furnace that is only partially full.
*Heat output and efficiency may vary based on wood type,
quality and moisture.
With models ranging from
70,000-330,000 BTU/hour,
install the perfect boiler for
your heating needs. A few
extra logs will keep you warm
and cozy on those extra cold
winter days.
5
4
3
4
3
2
Emissions
lb/mBTU Output
Emissions
lb/mBTU Output
3
2
1
2
1
0
PS200
PS400
EPA White
Tag Max
Conventional
Wood Boiler
PS200
0
350
PS200
PS400
EPA White
Tag Max
EPA White
Tag Max
Conventional
Wood Boiler
Conventional
Wood Boiler
1
0
300
350
250
350
300
200
300
250
150
250
200
100
200
150
50
150
100
0
100
50
50
0
0
Heat Output*
PS400
1000’s BTU/Hour
Heat Output*
1000’s
HeatBTU/Hour
Output*
1000’s BTU/Hour
PS200
PS200
PS400
PS200
PS400
90% EFFICIENCY!
100
Efficiency
Cut your fuel requirements
and loading time in half with
an Empyre Pro Series. By
burning both the wood and the
gases released from the wood,
the Empyre Pro Series can
produce twice the heat from
the same quantity of wood.
80
100
Efficiency
Efficiency
100
60
80
PS400
Peak
90% CLEANER
BURNING!
lb/mBTU Output
8-Hour Burn
EPA White Tag Qualified
5
4
12-Hour Burn
PATENT PENDING
Peak
Pro-Fab Industries
Inc.
400
177,333 BTU/HR
78.9% (using
90.2% (using higher heating value)
lower heating
6.10 GRAMS/H
value)
13.6 GRAMS/H R (average)
0.20 LBS/MILLI R (maximum test
run)
0.31 LBS/MILLI ON BTU INPUT
EPA has determine
0.06 GRAMS/H ON BTU OUTPUT
d, based
R/10,000 BTU
model qualifies
OUTPUT
at the Phase on testing by an accredited
2 emissions
level for U.S. independent laboratory
EPA’s Voluntary
, that this
Program.
8-Hour Burn
0.31
THIS MODEL
MANUFAC
TURER:
MODEL NUMBER:
8-HOUR OUTPUT
RATING:
AVERAGE
EFFICIENC
Y:
PARTICLE
EMISSION
S:
The Phase 2 white tag identifies furnaces
qualified by the EPA (Environmental Protection
Agency) Hydronic Heater Program to burn
approximately 90% cleaner. The Empyre Pro
Series is EPA White Tag Qualified.
5
12-Hour Burn
Phase 2 Qualifie
d models
models that
are cleaner
have not
and pollute
met this
been associat
less than
ed with respirat emission level.
those
Models that
Exposure
ory illness
to smoke
have lower
has
smoke emissioand other health
ns may reduce problems.
your risk.
80
40
60
60
20
40
40
0
20
20
0
0
Conventional
Wood Boiler
Conventional
Wood Boiler
Conventional
Wood Boiler
PS200
PS400
PS200
PS400
PS200
PS400
Empyre Pro Series Up Close
1 Flues Transfer heat to the water jacket
9 Primary Burn Chamber Wood in the
2 Loading Door Extra large size for ease of
10 Secondary Burn Chamber Exhaust
quickly and efficiently; simple to clean
from rear clean out port.
sealed firebox burns whenever air is introduced
and does not smolder between cycles.
gases from the firebox are injected with
air and burn at up to 2,000oF to achieve
nearly 100% fuel combustion.
loading and heavy duty construction for long life.
3 Full Length Exhaust Curtain Keeps
combustion gases from escaping when
opening the loading door.
11 Fire Brick Refractory from the gasification chamber simple.
5 Water Level Indicator Monitor
furnace water levels at a glance.
with the top lifting hook and forklift guides.
7 Seamless Roof Prevents rust and corrosion
by keeping moisture out of the furnace.
Solid steel workmanship for
many years of quality service
2
9
3
13 Premium Bat Insulation to heat your home by a forced air or radiant
heating system.
How it Works
11
10
Will not oxidize or shrink;
keeps heat inside the
furnace and the outside
safe to touch.
8 Water Reservoir Stores heated water
7
1
12 Durable Construction 6 Easy Lift Hook Installation is simple
6
8
Stores heat in the firebox
for hours, reigniting the
wood quickly on a
demand for heat.
4 Ash Door Insulated door makes ash cleanup
5
4
12
13
Gasification
Combine the simplicity and safety of a conventional
furnace with the savings and technology of a high
efficiency furnace. The Empyre Pro Series can provide heat
to your house, greenhouse, pool, shop or other buildings.
The Empyre Pro Series uses a process
called wood gasification to produce
highly efficient combustion in the
furnace’s dual burn chambers.
Heat from the Empyre Pro Series dual burn chamber is
transferred to the furnace’s built-in water jacket through
a series of flues. Heated water is plumbed to your
home’s heating system through underground insulated
pipes. The Empyre Pro Series’ full length back
door allows for plenty of access which
makes plumbing simple.
1Firebox wood burns from the bottom
In a house, the heated water
connects directly to the radiant
or forced air heating system
through a heat exchanger.
Similarly, the Empyre Pro
Series is capable of heating all
domestic hot water through
a sidearm heat exchanger
installed on the hot water tank.
up, drying the top layer; the fire brick
lining absorbs heat and maintains burn
chamber temperatures to reignite quickly
on demand.
5
2Exhaust is forced down into the lower
burn chamber.
3Lower Burn Chamber exhaust burns
at up to 2,000oF (1093oC).*
4
1
4Flues exhaust air escapes through
multiple heat exchange flues running
through the water jacket, transferring heat
quickly and efficiently.
2
3
5Chimney exhaust has cooled to 350oF
(177oC)* by the time it exits the chimney.
*May vary based on fuel type, burn rate and other conditions.
TESTIMONIAL
Empyre Pro Series 400 Saves $4,000.00/yr
3,800 FT2 HOME & 3,000 FT2 SHOP IN BUCKHORN, ONTARIO.
RALPH’S EMPYRE
Ralph B. purchases 12-13 cords of
PRO SERIES TOP 5
2
wood to heat his 3,800 ft home and
112 Hour Burn Times
3,000 ft2 shop in Buckhorn, Ontario.
2Burn Full Log Lengths
Switching from oil, which had cost
3Wood Pile Outside
him $6,000.00/yr, to wood, which costs 4Easy Ash Removal
5Consistent Hydronic
$1,800.00/yr, saves him more than
Heat Throughout
Shop & House
$4,000.00 annually on heating costs.
Pro Series 200
Sizes and Models
200
Pro Series 400
400
Heat Output (Peak)*
230,000 BTU/hr
67.4 kWh
330,000 BTU/hr
96.7 kWh
Heat Output (8 Hour Burn)*
110,000 BTU/hr
32.2 kWh
230,000 BTU/hr
67.4 kWh
150,000 BTU/hr
44.0 kWh
Heat Output (12 Hour Burn)* 70,000 BTU/hr
20.5 kWh
Heating Area
2,000 to 4,000 Sq. Ft
186 m to 372 m
6,000 to 8,000 Sq. Ft
557 m2 to 743 m2
Width
48”
122 cm
49”
124 cm
Length
73”
185 cm
81”
206 cm
Height
81”
206 cm
96”
244 cm
Shipping Weight
2,100 lb
953 kg
2,500 lb
1,134 kg
Chimney Size
6”
15 cm
8”
20 cm
Door Size
18” X 18”
46 x 46 cm
20” x 24”
51 x 61 cm
Firebox Volume - W x H x L
23” x 22” x 31”
58 x 56 x 79 cm
28” x 33” x 40”
71 x 84 x 102 cm
Water Capacity
75 US gal
284 L
115 US gal
435 L
Maximum Log Length
26”
66 cm
34”
86 cm
Maximum Log Diameter
6”
15 cm
7”
18 cm
Limited Warranty
10 Years
10 Years
EPA White Tag Phase 2 Qualified
Yes
Yes
2
2
*Heat output may vary based on wood type, quality and moisture.
Pro-Fab Industries Inc., founded in 1989, is North America’s premier designer of alternative heating
products. With five manufacturing facilities across three countries, Pro-Fab Industries has the widest
range of EPA qualified clean burning units on the market.
Your EMPYRE Dealer
Manufactured by:
Pro-Fab Industries Inc.
Arborg, MB, Canada
R0C 0A0
888-933-4440
www.profabgroup.com
Part No. 817431R01 Printed in Canada JW0512