Data Sheet of SAW Components

Data Sheet of SAW Components
Note : Murata SAW Component is applicable for Cellular /Cordless
phone (Terminal) relevant market only.
Please also read caution at the end of this document.
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A [ Tx
Package Dimensions
Top View
Specification
(9)
$ A
(4)
2 W
Insertion Loss
(882 4 to 912
(882.4
912.6MHz)
6MHz) *
0.6max.
(0.155)
(C0.15)
(1) (2) (3)
0.61±0.08
2-0.29±0.08 (8)
9-0.29±0.08
(0.075)
8-0.33±0.08
(0.075)
(4)
4-0.43±0.08
(5)
6-0.29±0.08
(9)
(7) (6)
M ki
Marking:
L
Laser P
Printing
i i
: EIAJ Code
(Refer to the table 1)
$ : Date Code
(Refer to the table 2)
*
(3)
(1)(8)
(6)
Others
: Tx
: Rx
: Ant
: Ground
Unit : mm
typ.
897.5MHz
2.5 dBINT max. 2.2 dBINT max.
1.6 dBINT
1)
10 to
716 MHz
30 dB min.
30 dB min.
37 dB
2)
716 to
728 MHz
30 dB min.
30 dB min.
37 dB
821 MHz
30 dB min.
30 dB min.
37 dB
44 dBINT min.
44 dBINT min.
53 dBINT
3)
728 to
4)
927.4 to
957.6 MHz *
5) 1565.4 to
1573.4 MHz
45 dB min.
45 dB min.
50 dB
6) 1573.4 to
1577.5 MHz
45 dB min.
45 dB min.
50 dB
7) 1577.5 to
1585.4 MHz
45 dB min.
45 dB min.
50 dB
8) 1597.5 to
1605.9 MHz
45 dB min.
45 dB min.
50 dB
9)
1760 to
1830 MHz
35 dB min.
35 dB min.
46 dB
10)
1830 to
1880 MHz
35 dB min.
35 dB min.
46 dB
11)
2110 to
2170 MHz
35 dB min.
35 dB min.
44 dB
12)
2400 to
2500 MHz
35 dB min
min.
35 dB min
min.
44 dB
13)
2620 to
2745 MHz
30 dB min.
30 dB min.
34 dB
14)
3520 to
3660 MHz
5 dB min.
5 dB min.
11 dB
15)
4400 to
4575 MHz
4 dB min.
4 dB min.
10 dB
16)
5150 to
5490 MHz
4 dB min.
4 dB min.
17 dB
17)
5725 to
5850 MHz
10 dB min.
10 dB min.
19 dB
18)
6160 to
6405 MHz
4 dB min.
4 dB min.
15 dB
19)
7040 to
7320 MHz
5 dB min.
5 dB min.
10 dB
20)
7920 to
8235 MHz
3 dB min.
3 dB min.
9 dB
Ripple Deviation
(880.48 to 914.52MHz)
3.0 dB max.
1.8 dB max.
1.1 dB
Ripple Deviation any 5MHz
(880.48 to 914.52MHz)
2.1 dB max.
1.3 dB max.
0.8 dB
VSWR
(880.48 to 914.52MHz)
2.0 max.
2.0 max.
ANT Port Matching Impedance(nominal)
50Ω
Rx Port Matching Impedance(nominal)
100Ω
0.8W, 55°C,10000 hours
(
* Integration calculation (dBINT):
dBINT
1.6
50Ω //7.0nH
Tx Port Matching Impedance(nominal)
Input Signal Level
Jan. 30, 2012
25±2°C
Absolute Attenuation
(1) (2) (3)
Bottom View
-30 to 85°C
Nominal Center Frequency (fc)
1.6±
±0.1
(7) (6) (5)
Dot Marking(φ0.3)
Specification
Item
2.0±0.1
(8)
ANT]
)
⎡ N ⎡ 10( Loss ( f n−1 ) /10 ) + 10( Loss ( f n ) /10)
⎤⎤
× (Fn − Fn −1 )⎥ ⎥
⎢∑ ⎢
2
n=2
⎦⎥
= 10 log ⎢ ⎣
⎢
⎥
FN − F1
⎢
⎥
⎣⎢
⎦⎥
1/9
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A [ Tx
Frequency Performance
Jan. 30, 2012
ANT]
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A [ ANT
Package Dimensions
Top View
Specification
(9)
$ A
(4)
2 W
0.6max.
(0.155)
(C0.15)
(1) (2) (3)
9-0.29±0.08
(0.075)
8-0.33±0.08
(0.075)
1)
927 4 to
927.4
t
2)
925 to
957 6 MHz
957.6
MH *
(4)
960 MHz
3.3 dB max.
3.0 dB max.
2.3 dB
880 MHz
50 dB min.
50 dB min.
68 dB
46 dBINT min.
46 dBINT min.
55 dBINT
Absolute Attenuation
1)
10 to
2)
882.4 to
912.6 MHz *
3)
880 to
915 MHz
35 dB min.
35 dB min.
53 dB
4)
1045 to
1750 MHz
40 dB min.
40 dB min.
61 dB
5)
1750 to
3576 MHz
35 dB min.
35 dB min.
53 dB
6)
3576 to
4810 MHz
28 dB min.
28 dB min.
43 dB
7)
6465 to
6730 MHz
26 dB min.
26 dB min.
39 dB
8)
8315 to
8650 MHz
10 dB min.
10 dB min.
24 dB
1.7 dB max.
1.7 dB max.
0.6 dB
±1.0 dB max.
±1.0 dB max.
6-0.29±0.08
4-0.43±0.08
180±10deg.
max.
180±10deg.
180+5deg.
max.
2.1 max.
2.1 max.
Amplitude Balance
(5)
(925 to 960MHz)
Phase Balance
(925 to 960MHz)
VSWR
(925 to 960MHz)
M ki
Marking:
L
Laser P
Printing
i i
: EIAJ Code
(Refer to the table 1)
$ : Date Code
(Refer to the table 2)
*
(3)
(1)(8)
(6)
Others
942.5MHz
2 0 dBINT
2.0
(925 tto 960MH
960MHz))
(9)
(7) (6)
typ.
2 5 dBINT max. 2.4
2.5
2 4 dBINT max.
Ripple Deviation any 5MHz
0.61±0.08
2-0.29±0.08 (8)
25±2°C
Insertion Loss
(1) (2) (3)
Bottom View
-30 to 85°C
Nominal Center Frequency (fc)
1.6±
±0.1
(7) (6) (5)
Dot Marking(φ0.3)
Specification
Item
2.0±0.1
(8)
Rx]
ANT Port Matching Impedance(nominal)
+0.5
1.8
50Ω //7.0nH
Tx Port Matching Impedance(nominal)
50Ω
Rx Port Matching Impedance(nominal)
100Ω
: Tx
: Rx
: Ant
: Ground
Unit : mm
(
* Integration calculation (dBINT):
Jan. 30, 2012
dBINT
)
⎡ N ⎡ 10( Loss ( f n−1 ) /10 ) + 10( Loss ( f n ) /10)
⎤⎤
× (Fn − Fn −1 )⎥ ⎥
⎢∑ ⎢
2
n=2
⎦⎥
= 10 log ⎢ ⎣
⎢
⎥
FN − F1
⎢
⎥
⎢⎣
⎥⎦
3/9
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A
Frequency Performance
Amplitude balance
Jan. 30, 2012
Phase balance
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A [ Tx
Package Dimensions
Top View
Specification
(9)
$ A
(4)
2 W
(0.155)
0.6max.
(C0.15)
(1) (2) (3)
0.61±0.08
2-0.29±0.08 (8)
typ.
1)
882.4 to
912.6 MHz *
53 dBINT min.
53 dBINT min. 57 dBINT
2)
927 4 to
927.4
957 6 MHz *
957.6
50 dBINT min.
min
50 dBINT min.
min 54 dBINT
55 dBINT min.
55 dBINT min. 58 dBINT
1)
882.4 to
912.6 MHz *
9-0.29±0.08
(0.075)
8-0.33±0.08
(0.075)
25±2°C
Isolation(Common mode)
(1) (2) (3)
Bottom View
-30 to 85°C
Isolation(Differential mode)
1.6±
±0.1
(7) (6) (5)
Dot Marking(φ0.3)
Specification
Item
2.0±0.1
(8)
Rx]
(4)
(7) (6)
4-0.43±0.08
(5)
6-0.29±0.08
(9)
M ki
Marking:
L
Laser P
Printing
i i
: EIAJ Code
(Refer to the table 1)
$ : Date Code
(Refer to the table 2)
*
(3)
(1)(8)
(6)
Others
: Tx
: Rx
: Ant
: Ground
Unit : mm
(
* Integration calculation (dBINT):
Jan. 30, 2012
dBINT
)
⎡ N ⎡ 10( Loss ( f n−1 ) /10 ) + 10( Loss ( f n ) /10)
⎤⎤
× (Fn − Fn −1 )⎥ ⎥
⎢∑ ⎢
2
n=2
⎦⎥
= 10 log ⎢ ⎣
⎢
⎥
FN − F1
⎢
⎥
⎢⎣
⎥⎦
5/9
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A [ Tx
Frequency Performance
Jan. 30, 2012
Rx]
SAW DPX FOR UMTS Band8
$A
2W
$A
2W
$A
2W
+0.1
φ1.0-0.0
4.0±0.1
0.30±0.05
0.90±0.05
Direction of Feed
3°max.
2.33±0.1
8.0±0.22
+0.1
φ1.5-0.0
2.00±0.05
3°°max.
4.0±0.1
3.50±0.05
Dimensions of
Carrier Tape
1.75±0.10
Murata part number :SAYFH897MHC0F0A
Cover Tape
1.9±0.1
Dimensions
of Tape
p
Unit: mm
Trailer tape
Components
160...190
80...120
Leader Cavity
400...560
U it : mm
Unit
Dimensions of Reel
2.0±0.5
(φ330)
15.5max.
(φ100)
9.5±1.0
φ13.0±0.5
Unit: mm
SAYFH897MHC0F0AR00 … 10000pcs/reel
SAYFH897MHC0F0AR05 … 5000pcs/reel
Jan. 30, 2012
7/9
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A
Recommended Land Pattern
2-0.330
(4-0.430)
6-0.405
1.6
3-0.290
6-0.36
65
(6-0.290)
Top view
0.610
(2-0.290)
: Land Pattern
Unit : mm
2.0
Test Circuit
Bottom view
ANT
5
4
Tx
R1
6
7
2
R3
8
Rx
9
3
L
1
Rx
R2
R1: 50Ω
R2: 100Ω
R3: 50Ω
L : 7.0nH
7 0nH (ideal)
Jan. 30, 2012
8/9
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A
RoHS Compliance
This component is compliant with RoHS directive.
This component was always RoHS compliant from the first date of manufacture.
・ Caution - Limitation of Applications
This product is intended for the following applications only; however, please do not use this product in
these applications where defects might directly cause damage to a third party’s life, body or property.
a. Mobile Telephone
b. Cordless phone (except for Automotive use)
c. PC (Including Notebook PC, Netbook PC, Tablet)
d Game
d.
e. Camera (except for Business/security use)
f. Set Top Box
g. Electronic dictionary
h. Digital audio equipment
・This catalog is for reference only and not an official product specification document, therefore, please
review and approve our official product specification before ordering this product.
Marking code
Table 1
Table 2
Code
*This: EIAJ
rule of code is applied repeatedly every four year.
$: Date Code
date
code
date
code
date
code
Jan. 30, 2012
1st
A
11th
L
21st
W
2nd
B
12th
M
22nd
X
3rd
C
13th
N
23rd
Y
4th
D
14th
P
24th
Z
5th
E
15th
Q
25th
a
6th
F
16th
R
26th
b
7th
G
17th
S
27th
c
8th
H
18th
T
28th
d
9th
J
19th
U
29th
e
10th
K
20th
V
30th
f
31st
g
9/9
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A
„Important
Important notice
PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS.
Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the
specifications of our product when our product is mounted to your product.
All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that
our product is used for the purpose, under the condition and in the environment specified in this specification. You are
requested not to use our product deviating from the condition and the environment specified in this specification.
Please note that the only warranty that we provide regarding the products is its conformance to the specifications
provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such
products, which are caused under the conditions other than those specified in this specification.
WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY
ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS.
The product shall not be used in any application listed below which requires especially high reliability for the prevention
of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree
that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements.
Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS,
DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION,
ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS.
- Aircraft equipment.
- Aerospace equipment
- Undersea equipment.
- Power plant control equipment - Medical equipment.
- Transportation equipment (vehicles, trains, ships, elevator, etc.).
- Traffic signal equipment.
- Disaster prevention / crime prevention equipment.
- Burning / explosion control equipment
- Application of similar complexity and/ or reliability requirements to the applications listed in the above.
We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our
product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by
the regulations and laws in the world.
We do not warrant or represent that any license
license, either express or implied
implied, is granted under any our patent right
right,
copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in
which our products or services are used. Information provided by us regarding third-party products or services does
not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such
information may require a license from a third party under the patents or other intellectual property of the third party, or
a license from us under our patents or other intellectual property.
products, our technical information and other data p
provided by
y us for the p
purpose
p
of developing
p g
Please do not use our p
of mass-destruction weapons and the purpose of military use.
Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations",
etc.
Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of
materials and/or components from our suppliers.
Jan. 30, 2012
SAW DPX FOR UMTS Band8
Murata part number :SAYFH897MHC0F0A
Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of
Products only at the level required for consumer grade Products, and thus such analysis may not always be available
or be in accordance with your request (for example, in cases where the defect was caused by components in Products
supplied to Murata from a third party).
The product shall not be used in any other application/model than that of claimed to Murata.
Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to
their development status
status.
We reject any liability or product warranty for engineering samples.
In particular we disclaim liability for damages caused by
・the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the
product to be sold by you,
・deviation or lapse in function of engineering sample,
・improper use of engineering samples.
ed
disclaims
sc a s a
any
y liability
ab ty for
o co
consequential
seque t a a
and
d incidental
c de ta da
damages.
ages
We
If you can’t agree the above contents, you should inquire our sales.
Jan. 30, 2012