HT-F5500
HT-F5530
HT-F5550
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
HT-F5500_30_50-XU_0529.indd 1
2013-05-29 오후 4:37:03
Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous
voltage” inside the product that
presents a risk of electric shock
or personal injury.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
• The Mains plug is used as a disconnect device and
shall stay readily operable at any time.
• This apparatus shall always be connected to an AC
outlet with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug
must be pulled out from the mains socket, therefore
the mains plug shall be readily operable.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
This symbol indicates
important instructions
accompanying the product.
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO
BEAM.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the
fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug.
Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not
long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to
a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains
socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As these
colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–The wire
coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured
BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR BY THE EARTH
, OR COLOURED GREEN OR GREEN AND YELLOW.
SYMBOL
| 2 English
HT-F5500_30_50-XU_0529.indd 2
2013-05-29 오후 4:37:24
Disc Storage & Management
• Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases, on
the apparatus.
• To turn this apparatus off completely, you must pull the
power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all
times.
• Do not touch the power plug with a wet hand.
It can cause an electric shock.
• Do not plug multiple electric devices into the same wall
socket. Overloading a socket can cause it to overheat,
resulting in a fire.
• Maintenance of the Cabinet
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a cold place
to a warm place, condensation may occur on the
operating parts and lens and cause abnormal disc
playback. If this occurs, unplug the product, wait for
two hours, and then connect the plug to the power
outlet. Then, insert the disc, and try to play back
again.
Manufactured under licence
from Dolby Laboratories.
Dolby, Pro Logic, and
the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under a licence from U.S. Patent
No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535,
6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and
7,548,853. DTS, DTS-HD, the Symbol, and DTS
or DTS-HD and the Symbol together are registered
trademarks & DTS Neo:Fusion is a trademark of DTS,
Inc. ©2012 DTS, Inc. All Rights Reserved.
ABOUT DIVX VIDEO: DivX®
is a digital video format
created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit divx.com
for more information and software tools to convert
your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To
obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.
com for more information on how to complete your
registration.
DivX Certified® to play DivX® video up to HD 1080p,
including premium content.
DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and
are used under licence.
Covered by one or more of the following U.S. patents
: 7,295,673; 7,460,668; 7,515,710; 7,519,274
English
HT-F5500_30_50-XU_0529.indd 3
Safety Information
Handling Cautions
Licence
01
• Holding Discs
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
- Avoid touching the surface of a disc where data has
been recorded.
- Hold the disc by the edges so that fingerprints will
not get on the surface.
- Do not stick paper or tape on the disc.
• Cleaning Discs
- If you get fingerprints or dirt on a disc,
clean it with a mild detergent diluted
in water and wipe with a soft cloth.
- When cleaning, wipe gently from the
inside to the outside of the disc.
- Disc Storage
 Do not keep in direct sunlight.
 Keep in a cool ventilated area.
 Keep in a clean protection jacket and store
vertically.
• If the product makes an abnormal noise or produces
a burning smell or smoke, turn off the power switch
immediately and disconnect the power plug from
the wall outlet. Then, contact the nearest customer
service centre for technical assistance. Do not use the
product. Using the product as it is may cause a fire or
an electric shock.
3|
2013-05-29 오후 4:37:25
Safety Information
The terms HDMI and HDMI
High-Definition Multimedia
Interface, and the HDMI
Logo are trademarks or registered trademarks of
HDMI Licencing LLC in the United States and other
countries.
Oracle and Java are registered trademarks
of Oracle and/or its affiliates. Other names
may be trademarks of their respective
owners.
This item incorporates copy protection technology
that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse engineering
and disassembly are prohibited.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks
of Blu-ray Disc Association.
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When
a prohibited use of an unauthorized copy is detected, a
message will be displayed and playback or copying will
be interrupted.
More information about Cinavia technology is provided
at the Cinavia Online Consumer Information Centre
at http://www.cinavia.com. To request additional
information about Cinavia by mail, send a postcard with
your mailing address to: Cinavia Consumer Information
Centre, P.O. Box 86851, San Diego, CA, 92138, USA.”
This product incorporates proprietary technology
under licence from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2010 Verance
Corporation. All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
- Open Source Licence Notice
In the case of using open source software, Open
Source Licences are available on the product menu.
Using the 3D Function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
Read and understand the following safety information
before using the 3D function.
• Some viewers may experience discomfort while viewing
3D TV such as dizziness, nausea, and headaches.
If you experience any such symptom, stop viewing 3D
TV, remove the 3D Active Glasses, and rest.
• Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses, and
rest.
• A responsible adult should frequently check on children
who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing 3D
TV and rest.
• Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
• Do not use the 3D function or 3D Active Glasses while
walking or moving around. Using the 3D function or 3D
Active Glasses while moving around may cause you to
bump into objects, trip, and/or fall, and cause serious
injury.
• If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product’s HDMI
OUT port using a high-speed HDMI cable. Put on 3D
glasses before playing the 3D content.
• The product outputs 3D signals only through HDMI
cable connected to the HDMI OUT port.
• As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D video, you
can not change the resolution to your preference.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not operate
properly in 3D play mode.
• You must use a high-speed HDMI cable for proper
output of the 3D signal.
• Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if
you have a 46 inch screen, stay 3.5 meters from the
screen.
• Place the 3D video screen at eye level for the best 3D
picture.
• When the product is connected to some 3D devices,
the 3D effect may not function properly.
• This product does not convert 2D content into 3D.
• “Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of
the Blu-ray Disc Association.
| 4 English
HT-F5500_30_50-XU_0529.indd 4
2013-05-29 오후 4:37:25
Copyright
MEDIA PLAY
SAFETY INFORMATION
2
3
3
3
4
5
Warning
Disc Storage & Management
Handling Cautions
Licence
Using the 3D Function
Copyright
GETTING STARTED
6
7
10
10
Disk and Format Compatibility
Logos of Discs the Product can Play
Accessories
Attaching the Toroidal Ferrite Core to the Lan Cable
of the Product
11 Front Panel
11 Rear Panel
12 Remote Control
CONNECTIONS
14 Connecting the Speakers
17 Connecting to TV/External Devices
18 Connecting to a Network Router
SETTINGS
19
19
19
20
24
27
The Initial Settings Procedure
The Home Screen
Accessing the Settings Screen
Settings Menu Functions
Networks and the Internet
Upgrading Software
The All Content Screen
Playing Commercial Discs
Playing Files on a USB Device
Playing a Disc with User Recorded Content
Using the AllShare Network Function
Controlling Video Playback
Controlling Music Playback
Playing Photo Contents
Listening to Radio
Using the Special Effects Remote Control Buttons
NETWORK SERVICES
43
43
44
44
48
51
Logging In to Your Samsung Account
Before Using Movies & TV Shows or Apps
Using Movies & TV Shows
Using Apps
Using the Web Browser
Linking your Internet Service Accounts to the
Product
51 BD-LIVE™
APPENDIX
52 Additional Information
55 Troubleshooting
58 Specifications
 Figures and illustrations in this User Manual are
provided for reference only and may differ from
actual product appearance.
 An administration fee may be charged if either
a. an engineer is called out at your request and
there is no defect in the product (i.e. where
you have failed to read this user manual)
b. you bring the unit to a repair centre and there
is no defect in the product (i.e. where you
have failed to read this user manual).
 The amount of such administration charge will
be advised to you before any work or home
visit is carried out.
English
HT-F5500_30_50-XU_0529.indd 5
Safety Information
Contents
29
29
29
30
30
31
34
38
39
41
01
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s manual
may be reproduced or copied without the prior written
permission of Samsung Electronics Co.,Ltd.
5|
2013-05-29 오후 4:37:26
Getting Started
Disk and Format Compatibility
Disc Types and content your Product can Play
Media
Disc Type
Blu-ray Disc
3D Blu-ray Disc
VIDEO
Details
BD-ROM or BD-RE/-R disc recorded in the BD-RE format.
DVD-VIDEO, DVD-RW,
DVD-R, DVD+RW,
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have
been recorded and finalised, or a USB storage media containing DivX,
MKV, MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB
storage media containing MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R discs or a USB
storage media containing JPEG contents.
| NOTES |
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your product will not play content that has been recorded on a DVD-R at a bit rate that exceeds 10 Mbps.
Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30
Mbps.
Playback may not work for some types of discs, or when you use specific operations, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if
necessary.
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc Types your Product cannot Play
• HD DVD
• DVD-ROM/PD/MV-Disc,
etc
• DVD-RAM
• Super Audio CD
(except CD layer)
• DVD-RW(VR mode)
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
• 3.9 GB DVD-R Disc for
Authoring.
| NOTES |
This product may not respond to all operating commands because some Blu-ray Disc, DVD, and CD discs allow
specific or limited operation and provide only certain features during playback.
Please note that this is not a defect in the product.
Samsung cannot guarantee that this product will play every disc bearing the Blu-ray Disc, DVD or CD logo because
disc formats evolve, and problems and errors may occur during the creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
Please contact the SAMSUNG Customer Care Centre at, if you have questions or encounter difficulty when playing
Blu-ray Disc, DVD, or CD discs in this product. Also, refer to rest of this user manual for additional information on
playback restrictions.
Some commercial discs and DVD discs purchased outside your region may not play on this product.
| 6 English
HT-F5500_30_50-XU_0529.indd 6
2013-05-29 오후 4:37:27
Region Code
Logos of Discs the Product can Play
Region
Code
Area
A
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
B
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
C
India, China, Russia, Central
and South Asia.
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle
East, Egypt, Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
North Korea, Mongolia
6
China
Blu-ray Disc
Blu-ray Disc
3D Blu-ray Disc
BD-LIVE
Dolby
Getting Started
Disc Type
02
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
do not match, the disc will not play.
The Region Number for this product is displayed on the
rear panel of the product.
DTS
DVD-VIDEO
PAL broadcast system in
U.K, France, Germany, etc.
DivX
Java
| NOTES |
If the Region number of a Blu-ray Disc/DVDs
does not correspond to the Region number of this
product, the product cannot play the disc.
English
HT-F5500_30_50-XU_0529.indd 7
7|
2013-05-29 오후 4:37:28
Getting Started
Supported Formats
Video File Support
File
Extension
Container
Video Codec
Resolution
Frame rate
(fps)
Bit Rate
(Mbps)
Audio Codec
Divx 3.11 / 4
/5/6
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
*.webm
WebM
MPEG4 SP/ASP
H.264 BP/
MP/HP
Motion JPEG
Microsoft
MPEG-4 v3
1920x1080
(WMV v7,v8,
MSMPEG4 v3 :
1280x720)
6~30
30
Window Media
Video v7, v8, v9
MPEG2
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital
Plus
MPEG (MP3)
DTS (Core)
MPEG1
VP6
640x480
-
4
MVC
-
24/25/30
60
VP8
1920x1080
6~30
20
 Limitations
- Even when a file is encoded by a supported codec
listed above, the file might not be played if its content
is defective or corrupted.
- Normal playback is not guaranteed if the file's container
information is wrong or the file itself is corrupted.
- Files having higher bit or frame rates than standard
may stutter when played back.
- The seek (skip) function is not available if the file's
index table is damaged.
- When you playback a file remotely through a network
connection, video playback may stutter depending on
the network speed.
- Some USB/Digital camera devices may not be
compatible with the product.
 Video decoder
- Supports up to H.264 Level 4.1 (except for FMO/ASO/
RS)
- Does not support VC1 AP L4
- Except for WMV v7, v8, MSMPEG4 v3, MVC, VP6
Below 1280 X 720: 60 frame max
Above 1280 X 720: 30 frame max
Vorbis
- Does not support GMC 2 or higher
- Supports SVAF Top/Bottom, Side by Side Only
- Supports BD MVC Spec Only
 Audio decoder
-
Supports WMA 10 Pro (Up to 5.1)
Does not support WMA lossless audio.
Supported ADPCM IMA, MS.
Does not support ADPCM (A-Law, μ-Low)
Does not support QCELP, AMR NB/WB
Supports vorbis (Up to 2ch),
Supports Dolby Digital Plus (Up to 7.1ch)
 Comments
-
MPEG4 : Supports up to GMC 1-Warping Point.
H.264 : Supports up to BP/MP/HP Level 4.1.
WMV : Supports V9, VC1 SP/MP/AP L3.
MPEG1 : Does not support D-picture.
MPEG2 : Supports up to Hight Profile High Level.
| 8 English
HT-F5500_30_50-XU_0529.indd 8
2013-05-29 오후 4:37:30
Supported DivX subtitle file formats
Picture File Support
*.ttxt, *.smi, *.srt, *.sub, *.txt
depending on their video resolution and frame rate.
Music File Support
File
Extension
*.mp3
Container
Audio
Codec
MPEG
MPEG1
Audio
Layer 3
Support Range
-
*.m4a
*.mpa
*.aac
MPEG4
AAC
-
*.flac
FLAC
FLAC
Supports up to
2ch
*.ogg
OGG
Vorbis
Supports up to
2ch
*.wma
WMA
WMA
Supports WMA 10
Pro (Up to 5.1)
Does not support
WMA lossless
audio
Supports up to M2
profile
Does not support
LBR mode
*.wav
wav
wav
-
*.mid
*.midi
midi
midi
type 0 and type 1
*.ape
ape
ape
Does not support
X13, NVT
Type
Resolution
*.jpg
*.jpeg
JPEG
15360x8640
*.png
PNG
4096x4096
*.bmp
BMP
4096x4096
*.mpo
MPO
15360x8640
Notes on the USB connection
• Your product supports USB storage media, MP3
players, digital cameras, and USB card readers.
• The product does not support folder or file names
longer than 128 characters.
• Some USB/digital camera devices may not be
compatible with the product.
• Your product supports the FAT 16, FAT 32, and NTFS
file systems.
• Connect USB devices directly to the product’s USB
port. Connecting through a USB cable may cause
compatibility problems.
• Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
• The product does not support the PTP protocol.
• Do not disconnect a USB device during a “loading”
process.
• The bigger the image resolution, the longer the image
takes to display.
• This product cannot play MP3 files with DRM (Digital
Rights Management) downloaded from commercial
sites.
• Your product only supports video that is under 30fps
(frame rate).
• Your product only supports USB Mass Storage Class
(MSC) devices such as thumb drives and USB HDD.
(HUB is not supported.)
• Certain USB HDD Devices, multi-card readers and
thumb drives may not be compatible with this product.
• If some USB devices require excessive power, they
may be limited by the circuit safety device.
• If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a wall
socket. If the problem continues, contact the USB
HDD manufacturer.
• SAMSUNG is not responsible for any data file damage
or data loss.
English
HT-F5500_30_50-XU_0708.indd 9
Getting Started
Some MKV and MP4 format discs may not play,
File Extension
02
| NOTES |
9|
2013-07-08 오후 1:44:48
Getting Started
AVCHD (Advanced Video Codec High Definition)
• This product can play back AVCHD format discs. These discs are normally recorded and used in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing
format.
• Some AVCHD discs use the “x.v.Colour” format. This product can play back AVCHD discs that use the “x.v.Colour”
format.
• “x.v.Colour” is a trademark of Sony Corporation.
• “AVCHD” and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony Corporation.
| NOTES |
Some AVCHD format discs may not play, depending on the recording conditions.
AVCHD format discs need to be finalised.
“x.v.Colour” offers a wider colour range than normal DVD camcorder discs.
Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
Accessories
Check for the supplied accessories below.
(For LAN cable)
FM Antenna
Toroidal Ferrite Core
Power Cable
FUNCTION
TV
SOURCE
RECEIVER
BD
TV
SLEEP
RDS DISPLAY
TA
1
2
PTY-
PTY SEARCH
4
5
7
8
3
PTY+
6
9
DISC MENU
TITLE MENU
0
POPUP
MUTE
VOL
TV SOUND
FULL SCREEN
TUNING
/ CH
REPEAT
HOME
TOOLS
INFO
EXIT
RETURN
TUNER
MEMORY
A
SMART
B
C
MO/ST
D
SEARCH S/W LEVEL 3D SOUND
HUB
MANUAL
PRESET
User Manual
AUDIO
SUBTITLE
SOUND
EFFECT
Remote Control/
Batteries (AAA size)
Soft Cloth
Attaching the Toroidal Ferrite Core to the LAN Cable of the Product
If you attach a Toroidal ferrite core to the LAN cable of the product, it will help to prevent RF interference from radio
signals.
1.
Pull the fixing tab of the Toroidal ferrite core to open it.
2.
Make two loops around the core with the LAN cable.
3.
Attach the Toroidal ferrite core to the LAN cable as the figure
shows and press to close until it clicks.
• Attach the ferrite core as close to the product as possible.
LAN
HDMI OUT
HDMI IN
5V 350mA
WIRELESS LAN
| 10 English
HT-F5500_30_50-XU_0529.indd 10
2013-05-29 오후 4:37:31
Front Panel
02
Getting Started
VOLUME CONTROL
OPEN/CLOSE
PLAY/PAUSE
STOP
FUNCTION
DISC TRAY
DISPLAY
5V 0.5A
USB
REMOTE CONTROL SENSOR
POWER
| NOTES |
When the product is on, do not let children touch the product's surface. It will be hot.
To upgrade the product's software through the USB jack, you must use a USB flash drive.
When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
E button.
If you use the Internet service or play the USB device contents on the TV, you cannot select the BD/DVD mode with
the FUNCTION button. Stop the playing contents on the TV first to select the BD/DVD mode.
Rear Panel
* FM ANTENNA
COOLING FAN
AUX IN
HDMI OUT
HDMI IN
SURROUND R
FRONT
R
SUBWOOFER
SURROUND
FRONT
L
L
IMPEDANCE : 3Ÿ
AUX IN
POWER
CENTER
LAN
R
SPEAKERS OUT
POWER CORD
FM ANT
L
SPEAKER OUTPUT
CONNECTORS
OPTICAL
DIGITAL
AUDIO IN
HDMI OUT
HDMI IN
5V 350mA
WIRELESS LAN
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
WIRELESS LAN
LAN TERMINAL
* Connecting the FM Antenna
1.
Connect the FM antenna supplied to the FM ANT Jack.
2.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
| NOTES |
Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate ventilation. Do not
obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
English
HT-F5500_30_50-XU_0529.indd 11
11 |
2013-05-29 오후 4:37:35
Getting Started
Remote Control
Tour of the Remote Control
Turn the product on and off.
FUNCTION
TV
SOURCE
To change to Television mode and
control the TV, press the TV button.
Set a Sleep time to shut off the
product.
RECEIVER
To change to Home Cinema mode
and control the Home Cinema,
press the BD button.
Press numeric buttons to operate
options.
BD
TV
SLEEP
RDS DISPLAY
TA
1
2
3
PTY-
PTY SEARCH
PTY+
4
5
6
7
8
TITLE MENU
0
Press to view the disc menu.
POPUP
MUTE
VOL
TV SOUND
TUNING
/ CH
Press to move to the Home screen.
FULL SCREEN
REPEAT
HOME
Press to see the full screen on a
TV.
TOOLS
INFO
RETURN
EXIT
Select on-screen menu items and
change menu values.
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
A
SMART
B
MANUAL
PRESET
MO/ST
C
D
SEARCH S/W LEVEL 3D SOUND
Press to select MANUAL/PRESET in
the Tuner function.
Press to search contents.
AUDIO
SUBTITLE
Search for active FM stations and
to change channels.
Press to output the audio signal to
the home cinema speakers or the TV
Speaker. (See page 42)
Allows you to repeat a title,
chapter, track or disc.
Use to display the playback
information when playing
a Blu-ray/DVD disc.
Press to exit the menu.
Use to set a preset radio frequency.
TUNER
MEMORY
HUB
Press to use Smart Hub.
Use to enter the Popup menu/Title
menu.
Press to pause a disc.
Cut off the sound temporarily.
Return to the previous menu.
Use the RDS function to receive
FM stations.
Press to search backwards or
forwards.
Press to skip backwards or
forwards.
Press to stop/play a disc.
Press to use the Tools menu.
Press to open and close the
disc tray.
9
DISC MENU
Adjust the volume.
Press to select the home cinema's
mode (HDMI, AUX, BD/DVD, etc.).
or
Press to select TV's video mode.
SOUND
Select MONO or STEREO for radio
broadcasts.
Press to apply the 3D sound effect.
EFFECT
Press to apply sound effects.
Use to adjust the level of the
subwoofer.
Selects the disc Audio language.
Selects the disc subtitle language.
| 12 English
HT-F5500_30_50-XU_0529.indd 12
2013-05-29 오후 4:37:36
Installing batteries in the Remote Control
Brand
Code
Mitsubishi/MGA
18, 40, 59, 60, 75
56, 57, 58
MTC
18
A Mark
01, 15
NEC
18, 19, 20, 40, 59, 60
Anam
01, 02, 03, 04, 05, 06, 07,
08, 09, 10, 11, 12, 13, 14
03
03
03
06, 07, 08, 09, 54, 66,
67, 73, 74
18
03, 15, 17, 18, 48, 54,
59, 62, 69, 90
15, 17, 18, 40, 48, 54,
62, 72
63, 66, 80, 91
15, 18, 59
40
06, 66, 67
17, 48, 56, 60, 61, 75
18, 59, 67, 76, 77, 78,
92, 93, 94
03, 19
40
AOC
01, 18, 40, 48
Nikei
Onking
Onwa
Bell & Howell
(M.Wards)
57, 58, 81
Panasonic
Brocsonic
59, 60
Penney
| NOTES |
Candle
18
Make sure to match the “+” and “–” ends of the
Cetronic
03
batteries with the diagram inside the compartment.
Citizen
03, 18, 25
Assuming typical TV usage, the batteries last for about
Cinema
97
one year.
The remote control can be used up to approximately 7
meters from the product in a straight line.
Setting up the Remote Control
You can control certain functions of your TV with this
remote control.
To operate a TV with the Remote Control
1.
Press the TV button to set the remote control to TV
mode.
2.
Turn on your TV.
3.
While holding down the POWER button, enter the
code corresponding to your brand of TV.
• If there is more than one code listed for your TV in
the table, enter one at a time to determine which
code works.
• Example : For a Samsung TV
While holding down the POWER button, use
the number buttons to enter 00. If that does not
work, try 15, then 16, etc.
4.
If the TV turns off, the setting is complete.
• You can use the TV POWER, VOLUME,
CHANNEL, and Numeric buttons (0~9).
| NOTES |
Classic
03
Concerto
18
Contec
46
Coronado
15
Craig
03, 05, 61, 82, 83, 84
Croslex
62
Crown
03
Curtis Mates
59, 61, 63
CXC
03
Daewoo
02, 03, 04, 15, 16, 17, 18,
19, 20, 21, 22, 23, 24, 25,
26, 27, 28, 29, 30, 32, 34,
35, 36, 48, 59, 90
Daytron
40
Dynasty
03
Emerson
03, 15, 40, 46, 59, 61, 64,
82, 83, 84, 85
Fisher
19, 65
Funai
03
Futuretech
03
General Electric 06, 40, 56, 59, 66, 67, 68
(GE)
Hall Mark
40
Hitachi
15, 18, 50, 59, 69
Inkel
45
JC Penny
56, 59, 67, 86
The remote may not be able to control some
JVC
70
functions, depending on your brand of TV. Also, the
remote control may not work on some brands of TVs.
The remote control will work with Samsung TVs by
default.
KTV
59, 61, 87, 88
KEC
03, 15, 40
KMC
15
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39,
40, 41, 42, 43, 44
Philco
Philips
Pioneer
Portland
Proton
Quasar
Radio Shack
RCA/Proscan
Realistic
Sampo
Samsung
00, 15, 16, 17, 40, 43,
46, 47, 48, 49,
59, 60, 98
Sanyo
Scott
Sears
Sharp
Signature 2000
(M.Wards)
19, 61, 65
03, 40, 60, 61
15, 18, 19
15, 57, 64
Sony
50, 51, 52, 53, 55
Soundesign
03, 40
57, 58
Spectricon
01
SSS
18
Sylvania
Symphonic
Tatung
Techwood
Teknika
TMK
Toshiba
Vidtech
18, 40, 48, 54, 59, 60,
62
61, 95, 96
06
18
03, 15, 18, 25
18, 40
19, 57, 63, 71
18
Videch
59, 60, 69
Luxman
18
Wards
15, 17, 18, 40, 48, 54,
60, 64
LXI (Sears)
19, 54, 56, 59, 60, 62, 63,
65, 71
Yamaha
18
York
40
Magnavox
15, 17, 18, 48, 54, 59, 60,
62, 72, 89
Yupiteru
03
Marantz
40, 54
Zenith
58, 79
Matsui
54
Zonda
01
MGA
18, 40
Dongyang
03, 54
English
HT-F5500_30_50-XU_0529.indd 13
Getting Started
2
Code
Admiral
(M.Wards)
02
Brand
Battery size: AAA
1
TV Control Codes
13 |
2013-05-29 오후 4:37:38
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
Place it on a stand or cabinet shelf, or
under the TV stand.
Centre
Subwoofer
Front (R)
Selecting the Listening Position
The listening position should be located
about 2.5 to 3 times the distance of the
Product
Surround (R)
TV's screen size away from the TV.
For example, if you have a 46 inch
Front (L)
screen, locate the listening position 2.92
to 3.50 meters from the screen.
Surround (L)
Front Speakers
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the front speakers so that their tweeters will be at the same height as your ear. Align the
front face of the front speakers with the front face of the centre speaker or place them slightly
in front of the centre speakers.
Centre Speaker
It is best to install the Centre Speaker at the same height as the front speakers. You can also
install it directly over or under the TV.
Surround
Speakers
Place these speakers to the side of your listening position. If there isn't enough room, place
these speakers so they face each other. Position them about 60 to 90cm above your ear,
facing slightly downward.
* Unlike the front and centre speakers, the surround speakers are used mainly for sound
effects. Sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
Speaker Components
HT-F5500
Front x 2
Surround x 2
Centre
Speaker Cable x 6
Subwoofer
| 14 English
HT-F5500_30_50-XU_0529.indd 14
2013-05-29 오후 4:37:40
HT-F5530
03
Connections
Screw (5X20) X 8
Centre
Front x 2
Stand x 2
Stand Base x 2
Surround x 2
Speaker Cable x 6
Subwoofer
HT-F5550
Screw (5X20) X 16
Centre
Front/Surround x 4
Stand x 4
Stand Base x 4
Speaker Cable x 6
Subwoofer
Installing the Speakers on the Tallboy Stand
* HT-F5530 only - Front Speakers
* HT-F5550 only - Front/Surround Speakers
1.
Turn the Stand Base upside-down and connect it to the
Stand.
2.
Use the driver to combine the screws on the 3 marked holes.
1
Stand Base
2
Stand
3.
Straighten a supplied speaker wire to the gravity direction
and put in the hole on the centre of Stand Base.
4.
Connect the upper Speaker to the assembled Stand.
3
4
Speaker
Stand
5.
6.
Insert a screw clockwise into the hole on the rear of the
speaker using a screwdriver.
And then connect a speaker cable.
5
6
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
English
HT-F5500_30_50-XU_0529.indd 15
15 |
2013-05-29 오후 4:37:42
Connections
Connecting The Speakers
1.
Match each speaker cable bundle to the correct speaker by matching the colour coded
plug on each bundle to the coloured sticker on the bottom of each speaker.
2.
To attach speaker wire to each speaker:
a. Press down the red tab on the back of the speaker, insert the red wire, and then
release the tab.
b. Press down the black tab on the back of the speaker, insert the black wire, and then
release the tab.
3.
Black
Red
Connect the speaker wire plugs from each speaker to the back of the product by
matching the colours of the speaker plugs to the colours of the speaker jacks.
* In case of HT-F5500
Front Speaker (R)
Surround Speaker (L)
SURROUND R
FRONT
SURROUND
FRONT
R
SUBWOOFER
L
L
,03('$1&(Ÿ
Surround Speaker (R)
Front Speaker (L)
CENTER
SPEAKERS OUT
FRONT
Subwoofer
R
SUBWOOFER
SURROUND
FRONT
L
CENTER
L
,03('$1&(Ÿ
AUX IN
SURROUND R
Centre Speaker
FM ANT
L
R
SPEAKERS OUT
OPTICAL
DIGITAL
AUDIO IN
HDM
* Refer to page 15 for the speakers of HT-F5530/HT-F5550.
| CAUTION |
If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the
rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by
the company.
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien
substances into the duct (hole) of the subwoofer speaker.
Do not hang the subwoofer on the wall using the duct (hole).
| NOTES |
If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses
the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.
| 16 English
HT-F5500_30_50-XU_0529.indd 16
2013-05-29 오후 4:37:48
Connecting to TV/External Devices
03
FRONT
R
SUBWOOFER
SURROUND
FRONT
L
CENTER
SPEAKERS OUT
L
,03('$1&(Ÿ
SURROUND R
Connections
AUX IN
AUX IN
POWER
FM ANT
FM ANT
LAN
L
R
OPTICAL
DIGITAL
AUDIO IN
HDMI OUT
HDMI IN
5V 350mA
WIRELESS LAN
L
OPTICAL
R
DIGITAL
AUDIO IN
R
W
HDMI OUT
HDMI IN
Red
White
Method 1
External Devices
Method 2
AUDIO OUT
OPTICAL OUT
Method 3
HDMI OUT
HDMI IN
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your
TV. If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control
and select HDMI as the external source of the TV.
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the
mode changes in this order : BD/DVD D. IN AUX HDMI FM BT
Method 1 AUX IN : Connecting an External Analogue Component
Using a RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the
external analogue component.  Select the AUX mode.
• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-TopBoxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the Digital
Optical Out jack of the external digital device.
 Select the D. IN mode.
Method 3 HDMI IN : Connecting to an External Component with an HDMI Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your
digital device.  Select the HDMI mode.
| NOTES |
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported
English
HT-F5500_30_50-XU_0529.indd 17
17 |
2013-05-29 오후 4:37:50
Connections
Wireless Network
You can connect your product to your network router
using one of the methods illustrated below.
AUX IN
POWER
SURROUND R
FRONT
R
SUBWOOFER
SURROUND
FRONT
L
CENTER
SPEAKERS OUT
L
,03('$1&(Ÿ
Connecting to a Network Router
FM ANT
LAN
L
R
OPTICAL
DIGITAL
AUDIO IN
HDMI OUT
HDMI IN
5V 350mA
WIRELESS LAN
Wired Network
SURROUND R
FRONT
R
SUBWOOFER
SURROUND
FRONT
L
CENTER
SPEAKERS OUT
L
,03('$1&(Ÿ
AUX IN
POWER
5V 350mA
WIRELESS LAN
FM ANT
LAN
L
R
OPTICAL
DIGITAL
AUDIO IN
HDMI OUT
HDMI IN
5V 350mA
WIRELESS LAN
Broadband modem
(with integrated router)
Broadband
service
Wireless IP sharer
Or
Router
Broadband
service
Broadband
service
Broadband
modem
| NOTES |
This product is compatible with only Samsung's
| NOTES |
Your router or your Internet Service Provider's policies
may prevent the product from accessing Samsung's
software update server. If this occurs, contact your
Internet Service Provider (ISP) for more information.
DSL users, please use a router to make a network
connection.
To use the AllShare function, you must connect your
PC to your network as shown in the illustrations on the
above.
The connection can be wired or wireless.
Wireless LAN Adapter. (not supplied) (Model name:
WIS-12ABGNX).
- The Samsung Wireless LAN Adapter is sold
separately. Contact a Samsung Electronics retailer
for purchasing.
You must use a wireless IP sharer that supports
IEEE 802.11 a/b/g/n. (n is recommended for stable
operation of the wireless network.)
Wireless LAN, by its nature, may cause interference,
depending on the use condition (router performance,
distance, obstacles, interference by other radio
devices, etc).
Set the wireless IP sharer to Infrastructure mode. Adhoc mode is not supported.
The home cinema supports the following security
protocols only:
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, AES
For the AllShare function, a PC must be connected in
the network as shown in the figure.
| 18 English
HT-F5500_30_50-XU_0529.indd 18
2013-05-29 오후 4:37:51
Settings
The Initial Settings Procedure
and make changes, select Settings > System >
Setup in the Home screen or select the Reset option.
(See page 22)
1.
Photos,
Videos &
Music
1
Settings : Set various functions to suit your
personal preferences.
7
RED (A) : Press the RED (A) button on your
remote to create and/or log in to your personal
Samsung account.
To select an option on the Home screen, move the
cursor using the ▲▼◄► buttons until it highlights
the option of your choice, and then press the E
button.
If you leave the product in the stop mode for more
than 5 minutes without using it, a screen saver will
appear on your TV. If the product is left in the screen
saver mode for more than 20 minutes, the power will
automatically turn off.
Accessing the Settings Screen
4
Apps
6
| NOTES |
The Home Screen
Movies & TV
Shows
Photos, Videos & Music : Play photos, videos
or music content from Disc, USB, PC or mobile
devices.
 Selecting an Option on the Home Screen
| NOTES |
If you want to display the Initial Settings screen again
5
Settings
The Initial Settings Procedure lets you set the OSD and
menu languages, configure the connection to your home
network, choose the aspect ratio output (screen size and
format) that is correct for your TV, and apply an upgrade
to your product's software, if one is available.
For complete Initial Settings instructions, follow the order
in the screen.
Apps : Download/Access various for pay or
free-of-charge applications.
04
• The Home menu will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
4
1.
Select Settings on the Home screen, and then
press E.
E The Settings screen appears.
5
Settings
Display
2
3
6
Add App
Add App
Add App
Web Browser
Display
3D Settings
Settings
a Samsung Account
Audio
7
TV Aspect Ratio
Network
BD Wise
Smart Features
Resolution
System
Movie Frame (24Fs)
DVD 24fps Conversion
Support
Movies & TV Shows : Download movies and
TV Shows from the Internet.
1
Smart Hub Screen Size
16:9 Original
Off
Auto
Auto
Off
Size 3
| NOTES |
Depending on your country, this menu
function may not be supported.
2
Recommended Apps : A list of useful and
popular apps we recommend you download.
3
Web Browser : You can access the Internet
using the Web Browser application.
2.
To access the menus, sub-menus, and options
on the Settings screen, please refer to the remote
control illustration on the next page.
English
HT-F5500_30_50-XU_0529.indd 19
19 |
2013-05-29 오후 4:37:54
Settings
Buttons on the Remote Control Used
for the Settings Menu
FULL SCREEN
1
HOME
TOOLS
EXIT
TUNER
MEMORY
Resolution
Lets you set the output resolution of
the HDMI video signal to
BD Wise, Auto, 1080p, 1080i,
720p, 576p/480p. The number
indicates the number of lines of
video per frame. The i and p indicate
interlaced and progressive scan,
respectively. The more lines, the
higher quality.
Movie Frame
(24Fs)
Setting the Movie Frame (24Fs)
feature to Auto lets the product
adjust its HDMI output to 24 frames
per second automatically for
improved picture quality if attached
to a 24Fs compatible TV.
• You can enjoy the Movie Frame
(24Fs) feature only on a TV
supporting this frame rate.
• Movie Frame is only available
when the product is in the HDMI
1080p output resolution modes.
DVD 24fps
Conversion
Converts DVD playback to 24
frames per second and outputs it via
HDMI. This option is only available
when Movie Frame (24Fs) is set to
on.
Smart Hub
Screen Size
Lets you select the optimal size for
the Smart Hub Screen.
HDMI Colour
Format
Lets you set the colour space format
for the HDMI output to match the
capabilities of the connected device
(TV, monitor, etc).
HDMI Deep
Colour
Lets you set the product to output
video from the HDMI OUT jack with
Deep Colour. Deep Colour provides
more accurate colour reproduction
with greater colour depth.
4
MO/ST
1
HOME Button : Press to move to the Home
screen.
2
RETURN Button : Return to the previous menu.
3
E (Enter) / DIRECTION Button :
• Press ▲▼◄► to move the cursor or select
an item.
• Press the E button to activate the currently
selected item or confirm a setting.
4
BD Wise
BD Wise is Samsung’s latest interconnectivity feature.
When you connect a Samsung
product and a Samsung TV with BD
Wise to each other via HDMI, and
BD Wise is on in both the product
and TV, the product outputs video at
the video resolution and frame rate
of the Blu-ray/DVD Disc.
INFO
RETURN
EXIT Button : Press to exit the current menu.
Detailed Function Information
Each Settings function, menu item, and individual option
is explained in detail on-screen. To view an explanation,
use the ▲▼◄►buttons to select the function, menu
item, or option. The explanation will usually appear on the
right of the screen.
A short description of each Settings function starts on
this page. Additional information on some of the functions
is also in the Appendix of this manual.
Settings Menu Functions
Display
3D Settings
Lets you adjust the output of the
product to the screen size of your
TV. See page 52.
REPEAT
3
2
TV Aspect
Ratio
Set up the 3D related functions.
 3D Blu-ray Playback Mode:
Select whether to play a Blu-ray
Disc with 3D contents in 3D Mode.
If you move to the Home or Smart
Hub Home menu while in 3D
mode, the product will switch to 2D
automatically.
 Screen Size: Enter the size of the
TV attached to the product. The
product will automatically adjust the
3D output to the screen size of the
TV.
| 20 English
HT-F5500_30_50-XU_0529.indd 20
2013-05-29 오후 4:37:58
Progressive
Mode
Simple
Speaker
Setup
Lets you configure the settings of
the speakers you have connected
to obtain the best possible surround
sound.
 Normal Mode: Select if you
have set up your speakers in the
recommended speaker layout with
the surround speakers next to or
behind the listening positions.
 Simple Mode: Select if you have
put your surround speakers in front
of the listening position. Downmixes
the front sound to the surround
sound speakers.
| NOTES |
DPLII, SFE, Virtual 7.1 will not
Dynamic
Range
Control
Lets you apply dynamic range
control to Dolby Digital, Dolby
Digital Plus, and Dolby TrueHD
audio.
 Auto: Automatically controls the
dynamic range of Dolby TrueHD
audio, based on information in the
Dolby TrueHD soundtrack. Also
turns dynamic range control off for
Dolby Digital and Dolby Digital Plus.
 Off: Leaves the dynamic range
uncompressed, letting you hear the
original sound.
 On: Turns dynamic range control on
for all three Dolby formats. Quieter
sounds are made louder and the
volume of loud sounds is reduced.
Downmixing
Mode
Lets you select the multi-channel
downmix method that is compatible
with your stereo system. You
can choose to have the product
downmix to normal stereo or in
surround compatible stereo.
Audio Sync
When the product is attached to a
digital TV, lets you adjust the audio
delay so that the audio syncs with
the video. You can set the delay
between 0 and 300 milliseconds.
operate when the simple mode is
on.
Speaker
Settings
Equaliser
Smart Volume
Speaker
Selection
Lets you adjust the following
speaker settings and turn the test
tone on and off so you can test the
speakers.
 Level: Lets you adjust the relative
loudness of each speaker from 6db
to -6db. For example, if you like
deep bass, you can increase the
loudness of the subwoofer by 6db.
 Distance: Lets you adjust the
relative distance of each speaker
from the listening position up to 9
meters. The farther the distance,
the louder the speaker will be.
 Test Tone: Lets you run the Test
Tone function so you can test your
adjustments. Setting Test Tone to
On turns the Test Tone on. Setting it
to Off turns it off.
Lets you configure the Equaliser
settings manually.
Lets you set the product so that
the volume remains stable when a
scene change occurs or when you
change the channel.
Settings
Digital Output
Lets you set the Digital Output to
match the capabilities of the AV
receiver you’ve connected to the
product. For more details, please
refer to the digital output selection
table. (See page 54)
Audio
04
Audio Return
Channel
Lets you direct the sound from the
TV to the Home Cinema speakers.
Requires a HDMI connection and
an Audio Return Channel (ARC)
compatible TV.
• If Audio Return Channel is set to
on and you are using an HDMI
cable to connect the product to
the TV, digital optical input will not
work.
• If Audio Return Channel is set to
auto and you are using an HDMI
Cable to connect the product to
the TV, ARC or digital optical input
is selected automatically.
Lets you improve picture quality
when viewing DVDs.
Lets you select which speakers you
want active, either the TV's speakers
or the home cinema's speakers.
English
HT-F5500_30_50-XU_0529.indd 21
21 |
2013-05-29 오후 4:38:00
Settings
Network
Network
Status
Lets you check the current network
and Internet status.
Network
Settings
Configure the network connection
so you can enjoy various features
such as Internet services or AllShare
Wi-Fi functionality, and perform
software upgrades.
Wi-Fi Direct
Lets you connect a Wi-Fi Direct
device to the product using a peerto-peer network, without the need
for a wireless router.
Note that if the product is connected
to a wireless network, it may be
disconnected when you use Wi-Fi
Direct.
Smart Features
Apps Settings
You can lock access to Video on
Demand (VOD) content based on its
rating.
VOD Rating
Lock
or .DOC extension, will not display
when you are using the Wi-Fi
Direct function.
AllShare
Settings
Lets you control which devices on
your network, such as smart phones
and tablets, can share content with
your TV.
Device Name
Lets you assign an identifying name
to the product. You use this name
to identify the product when you are
connecting external Wi-Fi devices
(smart phones, tablets, etc.) to it.
BD-Live
Settings
Set various BD-Live function. BDLive allows you to access extra
features available on some Blu-ray
Discs if you are connected to the
Internet.
 BD-Live Internet Connection :
Lets you fully allow, partly allow,
or prohibit a BD-Live Internet
connection.
 BD Data Management : Manage
BD data downloaded from a BDLive service or Blu-ray Disc.
| NOTES |
The default security PIN is 0000.
Depending on your country,
this menu function may not be
supported.
| NOTES |
Text files, such as files with a .TXT
Lets you configure App notification
settings and view basic info about
your Apps.
 Push Notification Settings :
Receive notifications from selected
services.
 Properties : See basic info about
Apps.
Terms &
Conditions,
Privacy Policy
Reset Smart
Hub
Lets you view the Smart Hub Terms
and Conditions and Privacy Policy.
Resets all Smart Hub settings to
their default settings.
| NOTES |
The default security PIN is 0000.
System
Setup
Language
Device
Manager
Lets you re-run the Initial Settings
procedure.
You can select the language you
prefer for the On-Screen menu, disc
menu, subtitles, etc.
• The language you select for the
disc menu, disc audio, or subtitles
will only appear if it is supported
on the disc.
You can connect a wireless USB
keyboard or mouse to the USB port
on the front of the product.
 Keyboard Settings: Lets you
configure a wireless USB keyboard
connected to the product.
| NOTES |
You can use the keyboard only
when a QWERTY keyboard
screen or window appears in the
Web Browser.
| 22 English
HT-F5500_30_50-XU_0529.indd 22
2013-05-29 오후 4:38:01
Connect the USB mouse to
the product.
2.
Click the primary button you
selected in Mouse Settings.
The Simple Menu appears.
3.
Click the menu options you
want.
| NOTES |
When the factory default settings
are restored, all the user stored
BD data is deleted.
General
| NOTES |
Some USB HID keyboards and
Security
mice may not be compatible with
your product.
Some HID keyboard keys may
not work.
Wired USB keyboards are not
supported.
Some applications may not be
supported.
If a wireless HID Keyboard does not
operate because of interference,
move the keyboard closer to the
product.
The default security PIN is 0000.
Enter the default PIN to access
the security function if you haven't
created your own PIN.
 BD Parental Rating: Restrict
playback of Blu-ray discs with
specific ratings unless the PIN is
entered.
 DVD Parental Rating: Prevents
playback of DVDs with a rating
above a specific numerical rating
you have set unless the PIN is
entered.
 Change PIN: Change the 4-digit
PIN used to access security
functions.
 If you forget your PIN
1.
Press and hold the 5 button
on the front panel for 5
seconds or more.
All settings will revert to the
factory default settings.
Settings
1.
2.
04
 Mouse Settings: Lets you
configure a wireless USB mouse
connected to the product. You can
use the mouse in the product's
menu in the same way you use a
mouse on your PC.
 To use a mouse with the
product's menu:
Anynet+
(HDMI-CEC)
You can specify the display
brightness and time zone.
 Front Display: Lets you change the
brightness of the front panel.
 Time Zone: You can specify the
time zone that is applicable to your
area.
 Menu Transparency: Adjust the
transparency of the menu box.
Anynet+ is a convenient function
that offers linked operations with
other Samsung products that have
the Anynet+ feature and lets you
control those products with one
Samsung TV remote. To operate
this function, you must connect this
product to an Anynet+ Samsung TV
using an HDMI cable.
If you want to use an Anynet+
(HDMI-CEC) function, please follow
the instructions below.
1) Connect the product to an
Anynet+ (HDMI-CEC)-compliant
Samsung TV using HDMI Cable.
2) Set the Anynet+ (HDMI-CEC)
feature to On in both the TV and
the product.
3) Search for and then select the
product in the TV's Anynet+
(HDMI-CEC) list. For more exact
instructions, see the Anynet+
section of the TV's user's
manual.
DivX® Video
On Demand
View DivX® VOD Registration
Codes to purchase and play DivX®
VOD contents.
Remove any disc or USB
storage device.
English
HT-F5500_30_50-XU_0529.indd 23
23 |
2013-05-29 오후 4:38:01
Settings
Support
1.
In the Home screen, select Settings, and then
press the E button.
Remote
Management
When activated, lets Samsung
Call Centre agents diagnose and
fix problems with the product
remotely. Requires an active Internet
connection. Remote Management
service might not be available in
some countries.
Software
Update
For more information about the
Software Update function, see
"Upgrading Software" on page 27.
Wired Network
Lets you set the Use mode. If you
are using the home cinema at home,
always select Home. Store is for
retail display settings only.
After following Steps 1 to 3 above:
Usage Mode
Contact
Samsung
Reset
Provides contact information for
assistance with your product.
Reverts all settings to their defaults
except for the network and Smart
Hub settings, and then starts the
Setup function. Requires that you
enter your security PIN. The default
security PIN is 0000
Networks and the Internet
When you connect this product to a network, you can
use network based applications and functions such as
Smart Hub and BD-LIVE, and upgrade the product's
software through the network connection. For more
information about accessing and using Internet services,
see the Network Services chapter of this manual on
pages 43~51. Instructions for configuring the network
connection start below.
2.
Select Network, and then press the E button.
3.
Select Network Settings, and then press the E
button.
4.
Go to the instructions for Wired networks starting
below or the instructions for Wireless networks
starting on page 25.
Wired – Automatic
1.
In the Network Settings screen, change Network
type to Wired. Then, select Connect and press
the E button. The product detects the wired
connection, verifies the network connection and
then connects to the network.
2.
When it is done, highlight OK, and then press E
button.
Wired - Manual
If you have a static IP address or the automatic procedure
does not work, you'll need to set the Network Settings
values manually.
After following Steps 1 to 3 above:
1.
| NOTES |
If it is possible to connect the home cinema to your
network wirelessly, select Change Network at this
point, change the Network type to Wireless, and
then go to the instructions for wireless networks on
page 25.
Configuring Your Network Connection
If you didn't configure your network connection during the
initial settings procedure or you need to reset the network
connection, follow the directions below.
Before you begin, contact your Internet Service Provider
to find out if your IP address is static or dynamic. If it
is dynamic, and you have a wired or wireless network,
we recommend using the Automatic configuration
procedures described below.
If you are connecting to a wired network, connect the
product to your router using a LAN cable before you start
the configuration procedure.
To begin configuring your network connection, follow
these steps:
In the Network Settings screen, change Network
type to Wired. Then, select Connect and press the
E button.
The product searches for a network, and then
displays the connection failed message.
Network Settings
Wired network connection failed.
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
XX:XX:XX:XX:XX:XX
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Unable to connect to the network. Try the following: check if your IP address is
set correctly in IP Settings. Contact your Internet service provider for more
information.
Change Network
2.
IP Settings
Retry
Close
Use the ◄► buttons to select IP Settings, and
then press the E button. The IP Settings screen
appears.
| 24 English
HT-F5500_30_50-XU_0529.indd 24
2013-05-29 오후 4:38:02
2.
Select the desired network, and then press the E
button.
4.
Select a value to enter (IP Address, for example),
and then press E. Use the number keypad on
your remote control to enter the numbers for the
value. You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote control
to move from entry field to entry field within a value.
When done with one value, press the E button.
3.
On the Security screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting a
letter with ▲▼◄► buttons, and then pressing E
button.
4.
5.
Press the ▲ or ▼ button to move to another value,
and then enter the numbers for that value following
the instructions in Step 4.
When finished, select the Done, and then press
the E button. The product verifies the network
connection and then connects to the network.
6.
Repeat Steps 4 and 5 until you have filled in all
values.
| NOTES |
You should be able to find the security code or pass
phrase on one of the set up screens you used to set
up your router or modem.
| NOTES |
You can get the Network values from your Internet
provider.
7.
When finished entering all the values, select OK,
and then press the E button. The home cinema
verifies the network connection and then connects
to the network.
Wireless Network
You can setup a wireless network connection in three
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network connection,
disconnect any wireless network device currently
connected to the product or, if applicable, the product's
current wired connection.
Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 24:
1.
In the Network Settings screen, change Network
type to Wireless. The product searches for and
then displays a list of the available networks.
Network Settings
Select your network type.
Network type
Wireless
Wireless network
Settings
Select the IP setting field, and then set it to Enter
manually.
04
3.
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the Network
Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 24:
1.
In the Network Settings screen, change Network
type to Wireless. The product searches for and
then displays a list of the available networks.
2.
Scroll through the list, select the desired network or
Add Network, and then press the E button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
4.
Enter your wireless network or wireless router's
name.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
• To display capital letters (or redisplay small letters
if capital letters are displayed), select
, and
then press the E button.
• To display symbols and punctuation, select
123#&, and then press the E button. To
redisplay letters, select 123#&, and then press
the E button.
When finished, select Done, and then press the E
button.
si-ap
iptime
iptime5G
You can connect your Blu-ray
player to the internet. Please
select which wireless network to
use.
KIMING_VTOWER
TIAS
Refresh
WPS(PBC)
English
HT-F5500_30_50-XU_0529.indd 25
25 |
2013-05-29 오후 4:38:03
Settings
5.
On the Security type screen that appears, use the
▲▼ buttons to select the network's Security type,
and then press the E button. On the next screen,
enter your network's security code or pass phrase.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
When finished, select Done, and then press the E
button. The product searches for the network.
6.
The Network connection fail screen appears. Use
◄► buttons to select IP Settings, and then press
the E button.
7.
Select the IP setting field, and then set it to Enter
manually.
8.
Select a network value to enter (IP Address, for
example), and then press E button. Use the
number keypad on your remote control to enter the
numbers for the value. You can also enter numbers
using the ▲▼ buttons. Use the ◄► buttons on the
remote control to move from entry field to entry field
within a value. When done with one value, press the
E button.
9.
Press the ▲ or ▼ button to move to another value,
and then enter the numbers for that value following
the instructions in Step 8.
10. Repeat Steps 8 and 9 until you have filled in all
values.
WPS(PBC)
One of the easiest ways to set up the wireless network
connection is using the WPS(PBC) function. If your
wireless router has a WPS(PBC) button, follow these
steps:
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 24:
1.
In the Network Settings screen, change Network
type to Wireless. The product searches for and
then displays a list of the available networks.
2.
Scroll the list down, select WPS(PBC), and then
press the E button.
3.
Press the WPS(PBC) button on your router within
two minutes. Your product automatically acquires all
the network settings values it needs and connects
to your network.
The product connects to the network after the
network connection is verified.
4.
When it is done, highlight OK, and then press E
button.
| NOTES |
For WPS connection, set your wireless router’s
security encryption to AES. Setting to WEP security
encryption does not support WPS connection.
Wi-Fi Direct
| NOTES |
The Wi-Fi Direct function allows you to connect Wi-Fi
Direct devices to the product and each other using a
peer-to-peer network, without a wireless router.
You can get the Network values from your Internet
| NOTES |
provider.
11. When finished, select OK, and then press the E
button. The Security Screen appears.
12. On the Security screen, enter your network's
Security Code or Pass Phrase. Enter numbers
directly using the number buttons on your remote
control. Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the E button.
13. When finished, select Done at the right of the
screen, and then press the E button. The product
verifies the network connection and then connects
to the network.
14. After the home cinema verifies the network, select
OK, and then press the E button.
| NOTES |
You can also begin the Manual Network setting by
Some Wi-Fi Direct devices may not support the
AllShare function if connected via Wi-Fi Direct. If this is
the case, change the network connection method you
used to connect the device to the home cinema.
Wi-Fi Direct transmissions can interfere with the
Bluetooth signal. Before you use the Bluetooth
function, we strongly recommend that you turn off
the Wi-Fi Direct function on any device in which it is
currently on.
1. Turn on the Wi-Fi direct device and activate its Wi-Fi
Direct function.
2.
In the Home screen, select Settings, and then
press the E button.
3.
Select Network, and then press the E button.
4.
Select Wi-Fi Direct, and then press the E button.
The Wi-Fi Direct devices that you can connect
appear.
going to Settings >Network > Network Status.
| 26 English
HT-F5500_30_50-XU_0529.indd 26
2013-05-29 오후 4:38:04
4.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
Disconnected
Refresh
Close
Settings
Note the PIN code in the pop-up, and then enter it
into the appropriate field in the Wi-Fi Direct device
you want to connect.
04
3.
Wi-Fi Direct
Device Name : [HTS]F5500
| NOTES |
The current wired or wireless network connection
5.
You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
2.
3.
will be disconnected when you use the Wi-Fi Direct
function.
Text files, such as files with a .TXT or .DOC extension,
will not display when you are using the Wi-Fi Direct
function.
Upgrading Software
The Software Update menu allows you to upgrade the
product’s software for performance improvements or
additional services.
On the Wi-Fi device, follow the device's procedure
for connecting to another Wi-Fi Direct device. See
the device's user manual for instructions.
When you have completed the procedure, you
should see a pop-up on your TV screen saying that
a device that supports Wi-Fi Direct has requested to
connect. Select OK, and then press the E button
to accept.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
• The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1.
Select the Wi-Fi Direct device you want to connect
to this product, and then press the E button.
2.
The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
Through the Product Using a PIN
1.
Select the Wi-Fi Direct device you want to connect
to this product, and then press the E button.
2.
The PIN pop-up appears.
• Never turn the product off or back on manually
during the update process.
1.
In the Home menu, select Settings, and then press
the E button.
2.
Select Support, and then press the E button.
3.
Select Software Update, and then press the E
button.
4.
To download update software and update now,
select Update now, and then press the E button.
See "Update now" on the next page for details.
5.
To let the product download update software
automatically when available, select Auto update,
and then press the E button. See "Auto update"
on the next page for details.
| NOTES |
The upgrade is complete when the product turns off,
and then turns on again by itself.
Samsung Electronics takes no legal responsibility for
product malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
When a system upgrade is progress, "UPDATE" is
displayed on the front panel.
English
HT-F5500_30_50-XU_0529.indd 27
27 |
2013-05-29 오후 4:38:04
Settings
Update now
Update by USB
You can use Update now to update the software through
your network connection or by using a USB flash drive.
The network instructions are below. The USB flash drive
instructions are on this page.
1.
Visit www.samsung.com.
2.
Click SUPPORT on the top right of the page.
3.
Enter the product's model number into the search
field. As you enter the model number, a drop down
will display products that match the model number.
4.
Left click your product's model number in the drop
down list.
5.
On the page that appears, scroll down to and then
click Firmware Manuals & Downloads.
1.
Select Update now, and then press the E button.
The Update now pop-up appears.
2.
The product searches on line for the latest software
version.
3.
If it does not find an update, the "There are no new
updates for you at the moment." pop-up appears.
Press the E button to exit.
6.
Click Firmware in the centre of the page.
Click the ZIP button in the File column on the right
side of the page.
4.
If it finds a new version, the Update Request popup appears.
7.
5.
Select OK. The product upgrades the software,
turns off, and then turns on automatically.
8.
6.
If you do not select OK or Cancel in one minute,
the product stores the new upgrade software. You
can upgrade the software later using Auto update.
Click Send in the first pop-up that appears.
Click OK in the second pop-up to download and
save the firmware file to your PC.
9.
If you select Cancel, the product cancells the
upgrade.
Unzip the zip archive to your computer. You should
have a single folder with the same name as the zip
file.
10. Copy the folder to a USB flash drive.
7.
| NOTES |
When the system upgrade is done, check the
software details in the Product Information section of
the Contact Samsung screen.
Do not turn off the product during the software
upgrade. It may cause the product to malfunction.
Auto update
You can set the Auto update function so that the product
downloads new upgrade software when it is in Auto
update mode.
In Auto update mode, the product is off, but its Internet
connection is active. This allows the product to download
upgrade software automatically, when you are not using
it.
1.
Press the ▲▼ buttons to select Auto update, and
then press the E button.
2.
Select On or Off.
If you select On, the product will automatically
download new upgrade software when it is in Auto
update mode with the power off. If it downloads
new upgrade software, the product will ask you if
you want to install it when you turn the product on.
11. Make sure no disc is inserted in the product, and
then insert the USB flash drive into the USB port of
the product.
12. In the product’s menu, go to Settings > Support >
Software Update.
13. Select Update now.
14. The product searches for the software on the
USB drive. When it finds the software,the Update
Request pop-up appears.
15. Select OK. The product upgrades the software,
turns off, and then turns on automatically.
| NOTES |
There should be no disc in the product when you
upgrade the software using the USB jack.
When the system upgrade is done, check the
software details in the Product Information section of
the Contact Samsung screen.
Do not turn off the product during the software
upgrade. It may cause the product to malfunction.
Software upgrades using the USB jack must be
performed with a USB flash drive only.
| NOTES |
To use the Auto update function, your product must
be connected to the Internet.
| 28 English
HT-F5500_30_50-XU_0529.indd 28
2013-05-29 오후 4:38:06
Media Play
Method 1
Turn the product on.
2.
Connect the USB device to the USB port on
the front panel of the product. The New Device
Connected pop-up appears.
| NOTES |
Movies & TV
Shows
PCs running Windows 7 and Windows 8 have DLNA
Apps
New device connected.
software (Play To) built in.
USB Flash Disk
Media Play
1.
05
Your home cinema can play content located on Blu-ray/
DVD/CD discs, USB devices, PCs, smart phones, tablets,
and on the Web.
To play content located on your PC or a mobile device,
you must connect the PC or mobile device and the
product to your network. To play content on your PC, you
must also download and install AllShare network software
or already have DLNA network software on your PC.
Phot
Photos,
Vide
Videos
o &
Mus
Music
i
Photos
Videos
Music
The All Content Screen
For all media, the All Content screen or one of its sub
screens are your primary means of accessing and playing
contents saved on a variety of devices, either connected
directly or using your network.
Using the All Content Screen
To access the All Content screen, select Photos, Videos
& Music on the Home screen, and then press the E
button.
Playing Commercial Discs
1.
Press the  button to open the disc tray.
2.
Place a disc gently into the disc tray with the disc’s
label facing up.
3.
Press the  button to close the disc tray.
Playback starts automatically.
4.
If playback does not start automatically, press the
6 button on the remote or see “The All Content
Screen” above.
Playing Files on a USB Device
There are two methods you can use to play or view
multimedia files located on a USB device through your
product.
All Content
Add App
Add App
Add App
Web Browser
Settings
| NOTES |
If the pop-up does not appear, go to Method 2.
3.
Use the ▲▼ buttons to select Photos, Videos,
Music or All Content, and then press the E
button. Depending on how the contents are
arranged, you will see either folders, individual files,
or both.
| NOTES |
Even though the product will display folders for all
content types, it will only display files of the Content
Type you selected in Step 3. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to the
Photos, Videos & Music screen, and then going to
Step 4 in Method 2 below.
4. If necessary, use the ▲▼◄► buttons to select a
folder, and then press the E button.
5.
Select a file to view or play, and then press the E
button.
6.
Press the RETURN button to exit a folder or the
Exit button to return to the Home screen.
7.
Go to pages 31~39 for instructions that explain how
to control playback of videos, music, and pictures
on a USB device.
Method 2
1.
Turn the product on.
2.
Connect the USB device to the USB port on the
front panel of the product.
3.
Select Photos, Videos & Music on the Home
screen, and then press the E button.
English
HT-F5500_30_50-XU_0529.indd 29
29 |
2013-05-29 오후 4:38:07
Media Play
4.
Select Photos, Videos, Music or All Content, and
then press the E button.
Depending on how the contents are arranged, you
will see either folders, individual files, or both.
3.
A screen appears listing the contents of the disc.
Depending on how the contents are arranged, you
will see either folders, individual files, or both.
4.
If necessary, use the ▲▼◄► buttons to select a
folder, and then press the E button.
5.
Use the ▲▼◄► buttons to select a file to view or
play, and then press the E button.
6.
Press the RETURN button one or more times to
exit a current screen, exit a folder, or to return to the
Home screen.
Press the Exit button to return directly to the Home
Screen.
7.
Go to pages 31~39 for instructions that explain how
to control playback of videos, music, and pictures
on a disc.
| NOTES |
Even though the product will display folders for all
content types, it will only display files of the Content
Type you selected in Step 4. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to the
Photos, Videos & Music screen and repeating Step 4.
5. Use the ◄► buttons to select the desired device
and then press the E button.
6.
If necessary, use the ▲▼◄► buttons to select a
folder, and then press the E button.
7.
Press the RETURN button to exit a folder or the
Exit button to return to the Home screen.
8.
Go to pages 31~39 for instructions that explain how
to control playback of videos, music, and pictures
on a USB device.
| NOTES |
If you insert a disc when playing a USB device
or phone, the device mode changes to "Disc"
automatically.
If your cellular phone is DLNA compatible, you can
play contents without connecting a USB cable. See
"Using the AllShare Network Function" on page 30.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded on Bluray, DVD, or CD discs.
1.
Place a user recorded disc into the disc tray with
the disc’s label facing up, and then close the tray.
The Device Connected pop-up appears.
2.
Use the ▲▼ buttons to select the type of content
you want to view or play - Photos, Videos, or Music
- and then press the E button.
Using the AllShare Network
Function
AllShare lets you play Photos, Videos, or Music located
on your PC or your DLNA compatible device through the
product using a wireless network connection.
To Download the AllShare Software
AllShare makes it easy to retrieve and enjoy media files
from computers and DLNA-enabled devices. However,
computers need to be installed with AllShare PC and
mobile devices need to support AllShare. For more
information, visit the Samsung Content & Service portal
(http://link.samsung.com).
| NOTES |
You may experience compatibility issues when
attempting to play media files via a third-party DLNA
server.
| NOTES |
Even though the product will display folders for all
content types, it will only display files of the Content
Type you selected in Step 2. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to the
Home screen and repeating Step 2.
| 30 English
HT-F5500_30_50-XU_0529.indd 30
2013-05-29 오후 4:38:11
Playing Content Located on Your PC or
DLNA Device through the Product
2.
Follow the directions in the AllShare software
Installation/Instruction manual to set up devices and
files for playing or viewing.
3.
On your computer, using the AllShare software,
confirm your phone is connected.
4.
On the phone, select the file you want to view or
play, and then select the Home cinema system as
the playback device.
5.
On the phone, start playback.
Product
Play back
PC's files
AllShare Connection
1.
Connect the product, your PC, and/or your DLNA
compatible device to the same wireless network.
2.
Follow the directions in the AllShare software
Installation/Instruction manual to set up devices and
files for playing or viewing.
3.
Select Photos, Videos & Music on the product's
Home screen, and then press the E button. The
Photos, Videos & Music screen appears.
4.
Select the type of content you want to play Photos, Videos, Music, or All Content - and then
press the E button.
5.
On the next screen, select AllShare, and then press
the E button.
6.
In the list of AllShare connected devices that
appears, select your PC or other AllShare
compatible device, and then press the E button.
A screen listing the available files appears.
Controlling Video Playback
You can control the playback of video content located on
a Blu-ray/DVD disc, USB device, mobile device or PC.
Depending on the disc or contents, some of the functions
described in this manual may not be available.
Buttons on the Remote Control used
for Video Playback
DISC MENU
POPUP
1
2
MUTE
Select the file you want to play or view, and then
press the E button.
Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
TITLE MENU
0
FULL SCREEN
7.
Media Play
Connect the product, your PC, and your DLNA
compatible cellular phone to the same wireless
network.
05
PC
1.
HOME
REPEAT
3
1 Using the disc menu, title menu, popup menu and
title list
DISC MENU
During playback, press this button to
display the Disc menu.
TITLE
MENU
During playback, press this button to
display the Title menu.
• If your disc has a playlist, press the
View button to go to the playlist.
POPUP
MENU
During playback, press this button to
display the Popup menu.
PC
Product
Play back
PC's files
AllShare
Connection
Control PC's
files to Product
Smart Phone
(Only available with Samsung phones supporting AllShare
functionality.)
English
HT-F5500_30_50-XU_0529.indd 31
31 |
2013-05-29 오후 4:38:11
Media Play
2 Playback related buttons
The product does not play sound in Search, Slow, or
Step mode.
• To return to normal speed playback, press the 6
button.
6
Starts playback.
5
Stops playback.
7
Pauses playback.
Fast Motion
Play
During playback, press the 3 or button.
Each time you press the 3 or button, the playback speed will
change.
Slow Motion
Play
In pause mode, press the button.
Each time you press the button,
the playback speed will change.
Step Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
Skip Motion
Play
During playback, press the 1 or 2
button.
Each time you press the 1 or 2
button, the disc moves to the previous
or next chapter or file.
The screen may not display Chapter or Title
immediately. Continue to press the ▲▼ buttons until
your choice is inside the applicable field.
To return to normal play, press the REPEAT button
again, press the ▲▼ buttons to select Off, and then
press the E button.
The screen may not display Repeat A-B immediately.
Continue to press the ▲▼ buttons until Repeat A-B is
inside the applicable field.
You must set point (B) at least 5 seconds of playing
time after point (A).
Using the TOOLS Menu
During playback, press the TOOLS button.
Play from the
beginning
Use 3D menu to select Side by
Side or Top Bottom option if the
3D content currently playing does
not properly appear in 3D mode.
3D
During playback, press the REPEAT button on the
remote control.
2.
Press the ▲▼ buttons to select Off, Title, Chapter,
All or Repeat A-B then press the E button.
| NOTES |
Use 3D menu only for 3D
contents of Side by Side or Top
Bottom format. If applied to 2D
contents, it may not be displayed
properly.
3 Repeat Playback
1.
Select to return to the beginning of
the movie, and then press the E
button.
You can use the Search Scene
function during playback to view
or start a movie from the scene of
your choice.
| NOTES |
Repeat A-B
1.
Press the E button at the point where you want
repeat play to start (A).
2.
Press the E button at the point where you want
repeat play to stop (B).
3.
To return to normal play, press the REPEAT button
again.
4.
Press the E button.
| NOTES |
If the index information in the file
Search Scene
is damaged or the file does not
support indexing, you will not be
able to use the Search Scene
function.
If you are using the DLNA
function after connecting to a
computer through your network,
Search Scene may not be
supported.
Depending on the disc, the screen may not display all
repeat options.
| 32 English
HT-F5500_30_50-XU_0529.indd 32
2013-05-29 오후 4:38:16
1.
Select Search Titles, and
then press the E button.
| NOTES |
2.
Use the ▲▼ buttons to select
a title, and then press the E
button.
You must set point (B) at least
5 seconds of playing time after
point (A).
Select to play the chapter of your
choice.
Chapter
Search
1.
Select Chapter Search , and
then press the E button.
2.
Use the ▲▼ buttons to select
a chapter, and then press the
E button.
Picture Mode
Select to play the movie from a
selected time point.
1.
Select Search Time Bar, and
then press the E button.
2.
Using the number buttons,
enter the time point you want
to go to, and then press the
E button.
Search Time
Bar
buttons to advance or rewind
the movie. The movie advances
or rewinds one minute each time
you press the ◄► buttons.
Repeat Mode
Select to repeat a title, chapter, or
specific section.
- Off : Select to return to normal
playback.
- Title : Choose to repeat a
selected title.
- Chapter : Choose to repeat a
specific chapter.
- Repeat A-B : Choose to repeat
a specific section.
1.
Press the ▲▼ buttons to
select repeat A-B, and then
press the E button.
2.
Press the E button at the
point where you want repeat
play to start (A). Let the movie
play.
Select to set the picture mode.
- Dynamic : Increases sharpness
and brightness.
- Standard : Choose this setting
for most viewing applications.
- Movie : The best setting for
watching movies.
- User : Lets you adjust the
sharpness and noise reduction
function respectively.
| NOTES |
When you use the BD wise
function, this menu will not
appear.
Equaliser
Mode
Select to use the Equaliser.
Equaliser
Settings
| NOTES |
| NOTES |
You can also use the ◄►
Select to set the Equaliser.
It only appears when equaliser
mode is on.
Audio
Select to set the desired audio
language.
Audio Sync
In some cases when the product is
connected to a digital TV, the audio
signal may not synchronize with the
video signal. If this occurs, adjust
the audio delay time to match the
video signal.
Subtitle
Select to set the desired subtitle
language.
- You can also operate this
function by pressing the
SUBTITLE button on the remote
control.
Subtitle
Settings
Select to set the desired subtitle
options.
English
HT-F5500_30_50-XU_0708.indd 33
Media Play
3.
05
Search Titles
Press the E button at the
point where you want repeat
play to stop (B).
If there is more than one movie on
the disc or device, select to start a
different title.
33 |
2013-07-08 오전 10:30:14
Media Play
To view a scene from another
angle. The Angle option displays
the number of angles available to
view (1/1, 1/2, 1/3, etc.).
Angle
BONUSVIEW
Video
BONUSVIEW
Audio
Select Send to upload
selected files to apps (Picasa,
Facebook etc) or devices.
To use Send, you need to
establish an account with the
on-line site, and then log in
using the Log In function.
Send
Select to set the desired bonusview
option.
| NOTES |
Depending on the disc or storage device, the Options
Full Screen
Select to set the size of the video
image. Choose Original, Mode1
(larger), or Mode2 (largest).
Information
Select to view video file information.
| NOTES |
View menus may differ. All options may not be
displayed.
The View and Options menus are usually available
when you are viewing video files on a USB flash
drive, a PC, a disc you recorded yourself, or a mobile
device. They are usually not available if you are viewing
a commercial Blu-ray, DVD, or CD disc.
Depending on the disc or storage device, the Tools
menu may differ.
Video files with high bit rates of 20Mbps or more strain
the product’s capabilities and may stop playing during
playback.
Controlling Music Playback
Using the View & Options Menus
You can control the playback of music content located on
a DVD, CD, USB, mobile device or PC. Depending on the
disc or contents, some of the functions described in this
manual may not be available.
On the screen that lists the video files, use the ▲▼◄►
buttons to select View or Options in the upper right, and
then press the E button.
Buttons on the Remote Control used
for Music Playback
RDS DISPLAY
Videos
Date
View
Title
Options
Displays all the folders with
videos by date. If you select
a folder, and then press E
button, displays all the videos
in the folder by date.
1
Displays all the video files on
the media or storage device
by title.
2
Folder
Displays all the folders on the
media or storage device.
Play
Selected
Play Selected lets you
create a playlist by selecting
specific files to play. It works
essentially the same way for
all media. See Creating a
Playlist from a CD on page
36.
TA
1
2
3
PTY-
PTY SEARCH
PTY+
4
5
6
7
8
DISC MENU
0
3
9
TITLE MENU
POPUP
MUTE
4
5
6
1
NUMBER buttons : If numbered tracks are
displayed, press the number of a track. The
selected track is played.
2
1 2 buttons : Move to the previous/next
track.
3
5 button : Stops a track.
| 34 English
HT-F5500_30_50-XU_0529.indd 34
2013-05-29 오후 4:38:18
5
7 button : Pause a track.
6
6 button : Plays the currently selected track.
Using the View & Options Menus
On the screen that lists the music files, use the ▲▼◄►
buttons to select View or Options in the upper right, and
then press the E button.
Music
Track
Displays all the music
tracks on the media or
storage device.
Album
Displays all the music on
the media or storage by
album.
Artist
Displays all the music files
on the media or storage
device by artist
Genre
Displays all the music on
the media or storage by
genre.
Folder
Displays all the folders
on the media or storage
device.
Play
Selected
Play Selected lets you
create a playlist by
selecting specific files to
play. It works essentially
the same way for all
media. See Creating a
Playlist on an Audio CD
on page 36.
Send
Select Send to upload
selected files to apps
(Picasa, Facebook etc)
or devices. To use Send,
you need to establish an
account with the on-line
site, and then log in using
the Log In function.
Ripping
The Ripping function
converts CD audio to the
mp3 format and saves
the converted files on a
USB device or the mobile
device connected to the
product. See Ripping on
page 36.
Music Screen Controls
Options
TRACK 001
00:09
00:43
off
off
TRACK 001
00:43
TRACK 002
03:56
TRACK 003
04:41
TRACK 004
04:02
TRACK 005
03:43
TRACK 006
03:40
TRACK 007
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02
View
Media Play
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or button.
Each time you press the 3 or button, the
playback speed will change.
05
4
Pause a track.
Play a track.
Move to the previous track.
Move to the next track.
Rewind the track.
Advance the track.
,
1
Repeat one track or all tracks.
Play tracks in random order.
Options
Display the Equaliser.
Adjust the equaliser manually.
(Only when equaliser mode is on)
To access the controls, play a track, and then use the
▲▼◄► buttons to move to the control of your choice.
| NOTES |
The Music Screen controls are only accessible when a
track is playing.
All controls do not appear at the same time.
Information
Select to see content
information.
English
HT-F5500_30_50-XU_0529.indd 35
35 |
2013-05-29 오후 4:38:20
Media Play
Options
Encoding
Select to manage the text
encoding options.
| NOTES |
5.
To remove a track from the list, move to the track,
and then press the E button again.The check on
the track is removed.
6.
When done, press the buttons to select Play,
and then press the E button. The Music Playback
screen reappears listing only the tracks you
checked. The selected tracks play automatically.
Depending on the disc or storage device, the Options
menu may differ. All options may not be displayed.
Repeating Tracks on an Audio CD
| NOTES |
You can set the product to repeat tracks on an audio CD
(CD-DA/MP3).
You can create a playlist with up to 99 tracks from
1.
2.
During playback, use the ▲▼◄► buttons to select
in the lower left corner of the screen, and then
press the E button.
Audio CDs (CD-DA).
If you have created a playlist, Play Selected is
replaced by Edit playlist on the Options menu.
On the Play Selected screen, you can also choose
Select All, Deselect All, and Cancel.
Use the ▲▼ to select the Repeat mode you want
- Off, One Song, or All - and then press the E
button.
~ Use Select All to select all tracks. This cancells
your individual track selections. When you press
the RETURN button on your remote or select Play
and then press the E button, all tracks will appear
on the Music Playback screen, and the product will
begin to play all tracks from Track 001.
~ Use Deselect All to deselect all selected tracks at
once. Then, select individual tracks or use Select
All to select all the tracks, and then press the
RETURN button on your remote or select Play and
then press the E button. If you do not use Select
All or select individual tracks, the Playlist will not
change.
~ Cancel cancells any changes you made on the Play
Select screen. When you return to the Playback
screen, the Playlist will be unchanged.
Options
TRACK 001
00:09
00:43
off
off
TRACK 001
00:43
TRACK 002
03:56
TRACK 003
04:41
TRACK 004
04:02
TRACK 005
03:43
TRACK 006
03:40
TRACK 007
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio CD
(CD-DA/MP3) at random.
1.
2.
Ripping
1.
During playback, use the ▲▼◄► buttons to select
in the lower left corner of the screen, and then
press the E button.
Insert a USB device into the USB jack on the front
of the product.
2.
Use the ▲▼ to set the Shuffle mode Off or On, and
then press the E button.
With the Playback screen displayed, select the
Options button and then press the E button.
The Options menu appears.
3.
Use the ▲▼ buttons to select Ripping, and then
press the E button. The Ripping screen appears.
4.
Use the ▲▼ buttons to select a track, and then
press the E button. A check appears to the left of
the track.
Creating a Playlist from a CD
1.
With the Playback screen displayed, select the
Options button and then press the E button. The
Options menu appears.
5.
Repeat Step 4 to select and check additional tracks.
2.
Use the buttons to select Play Selected , and
then press the E button. The Play Selected screen
appears.
6.
To remove a track from the list, move to the track,
and then press the E button again. The check on
the track is removed.
3.
Use the buttons to select a track, and then
press the E button. A check appears to the left of
the track.
7.
When done, select the Rip button using the ▲▼
buttons, and then press the E button.
The Rip pop-up appears.
4.
Repeat Step 3 to select and check additional tracks.
| 36 English
HT-F5500_30_50-XU_0529.indd 36
2013-05-29 오후 4:38:22
8.
Use the ▲▼ buttons to select the device to store
the ripped files on, and then press the E button.
Do not disconnect the device while ripping is in
progress.
If you want to cancel ripping, press the E button
and then select Yes. Select No to continue ripping.
10. When ripping is complete, the “Successfully ripped.”
message appears. Press the Ebutton.
11. Press the RETURN button to go back to the
Playback screen.
| NOTES |
To connect the Home Cinema to a
Bluetooth device
This function is not available with DTS Audio CDs..
This function may not be supported by some discs.
Ripping encodes music to the .mp3 format at
Connect
192kbps.
On the Ripping screen, you can also choose Select
All or Clear All.
- Use Select All to select all tracks and press the E
button. This cancells your individual track selections.
- Use Clear All to deselect all selected tracks at once.
Using Bluetooth
You can use a Bluetooth device to enjoy music with high
quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect with each other easily
using a short wireless connection.
• A Bluetooth device may hum or malfunction:
- When a part of your body is in contact with the
receiving/transmitting system of the Bluetooth device
or the Home Cinema.
- When it is subject to electrical variation from
obstructions caused by a wall, corner or office
partitioning.
- When it is exposed to electrical interference from
same frequency-band devices including medical
equipment, microwave ovens and wireless LANs.
• Pair the Home Cinema with the Bluetooth device while
the two are close together.
• The further the distance is between the Home Cinema
and the Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
Bluetooth device
Check if the Bluetooth device supports the Bluetooth
compliant stereo headset function.
1.
Press the FUNCTION button on the remote control
of the product to display the BT message.
2.
Select the Bluetooth menu on the Bluetooth device
you want to connect. For instructions, refer to the
Bluetooth device's manual.
3.
Select the Stereo headset menu on the Bluetooth
device.
• You will see a list of devices.
4.
Select "[HTS]Fxxxxx" from the searched list.
• When the Home Cinema is connected to the
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of home cinema will appear on the front
display of home cinema.
5.
Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Home
Cinema system.
English
HT-F5500_30_50-XU_0529.indd 37
Media Play
9.
05
| NOTES |
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
• The Home Cinema has an effective reception range
of up to 10 meters in all directions if there are no
obstacles. The connection will be automatically cut off
if the device is out of this range. Even within this range,
the sound quality may be degraded by obstacles such
as walls or doors.
• This wireless device may cause an electric interference
during its operation.
37 |
2013-05-29 오후 4:38:24
Media Play
| NOTES |
The Home Cinema only supports Middle Quality SBC
data (up to 237kbps@48kHz), and does not support
High Quality SBC data (328kbps@44.1kHz).
The AVRCP feature is supported. It's functionality
will differ, depending on the specifications of the
connected device.
Connect only to a Bluetooth device that supports the
A2DP Profile.
Only one Bluetooth device can be paired at a time.
The search or connection functions may not work
properly in the following cases:
- If there a strong electric field near or around the
home cinema.
- If several Bluetooth devices are simultaneously
paired with product.
- If the Bluetooth device is turned off, not in place, or
malfunctions.
- Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
and can cause electric interference.
To disconnect the Bluetooth device from
the Home Cinema
In Bluetooth mode, the screen saver will start if
the Bluetooth device stays in the Ready state for 5
minutes. To reconnect the Bluetooth device, turn off
the screen saver, and then connect the device. To turn
off the Screen saver, press any button on the remote
control (the Volume button, a number button, etc.)
Playing Photo Contents
You can play photo contents located on a DVD, USB,
mobile device or PC.
Using the Tools Menu
During playback, press the TOOLS button.
Previous
Select to move to the previous
picture.
Next
Select to move to the next picture.
Start / Stop
Slide Show
Select to play/pause the slide show.
Slideshow
Settings
 Speed : Select to set a slide
show's speed.
 Effects : Select to set a slide
show's special effects.
You can disconnect the Bluetooth device from the Home
Cinema. For instructions, refer to the Bluetooth device's
manual.
• When the Home Cinema is disconnected from the
Bluetooth device, the Home Cinema will display
DISCONNECTED on the front display.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This will
rotate the picture either clockwise
or counter clockwise.)
To disconnect the Home Cinema from the
Bluetooth device
Background
Music
Press the (
) button on the front panel of the Home
Cinema to switch from BT to another mode or turn off
the Home Cinema.
• Except when you disconnect the home cinema by
changing functions, the connected Bluetooth device
will wait a certain time for a response from the
Home Cinema before terminating the connection.
(Disconnection time may differ, depending on the
Bluetooth device.)
Settings
 Picture Mode
- Dynamic : Choose to increase
Sharpness.
- Standard : Choose for most
viewing applications.
- Movie : This is the best setting
for watching movies.
- User : Lets you adjust the
sharpness and noise reduction
function respectively.
 Information : Shows the picture
information.
Equaliser
Mode
Customize your own personal
sound preferences using the
Equaliser settings.
| NOTES |
In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between the
Home Cinema System and the Bluetooth device
exceeds 10 meters. When the Bluetooth device
comes back into effective range or you restart the
Bluetooth device, you have to pair the device and
home cinema again to reconnect.
Select to listen to music while
viewing a slide show.
| 38 English
HT-F5500_30_50-XU_0529.indd 38
2013-05-29 오후 4:38:25
Equaliser
Settings
This function is only available when
Equaliser Mode is On.
menu may differ. All options may not be displayed.
To enable the background music function, the photo
file must be in the same storage media as the music
file. However, the sound quality can be affected by the
bit rate of the MP3 file, the size of the photo, and the
encoding method.
You can't enlarge the subtitle and PG graphic in the
full screen mode.
| NOTES |
Depending on the disc or storage device, the Options
menu may differ. All options may not be displayed.
Using the View and Options Menus
When you See the Photo File List
Photos
Date
Groups all the photo files
on the media or storage
device by Date. Click a
group to see the photos in
that group.
Title
Displays all the photo files
on the media or storage
device by title.
View
Folder
Slide Show
Options
Play
Selected
Listening to Radio
Using Buttons on the Remote Control
1.
Press the FUNCTION button to select FM.
2.
Tune to the desired station.
• Preset Tuning 1 : Press the MANUAL/PRESET
button to select Preset and then press the
TUNING/CH (,.) button to select the preset
station.
- Before you can tune to preset stations, you
must add preset stations to the product's
memory.
• Manual Tuning : Press the MANUAL/PRESET
button to select Manual and then press the
TUNING/CH (,.) button to tune to a lower or
higher frequency.
• Automatic Tuning : Press the MANUAL/PRESET
button to select Manual and then press and hold
the TUNING/CH (,.) button to automatically
search the band.
Displays all the folders
on the media or storage
device.
Starts the slide show.
Shows all the files in the
current folder, one after
another. If you want to
create a slide show with a
selected group of photos,
see Play Selected below.
Play Selected lets you
create a playlist by
selecting specific files to
play. It works essentially
the same way for all
media. See Creating a
Playlist on an Audio CD
on page 36.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.]
Presetting Stations
Example : Presetting FM 89.10 into memory.
1.
Press the FUNCTION button to select FM.
2.
Press the TUNING/CH (,.) button to select
<89.10>.
English
HT-F5500_30_50-XU_0529.indd 39
Media Play
Send
Depending on the disc or storage device, the Options
05
| NOTES |
Select Send to upload
selected files to on line
sites (Picasa, Facebook
etc) or devices. To use
Send, you need to
establish an account with
the on-line site, and then
log in using the Log In
function.
39 |
2013-05-29 오후 4:38:26
Media Play
3.
4.
5.
Press the TUNER MEMORY button.
• NUMBER flashes on the display.
Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the displayon its own.
• After you press the TUNER MEMORY button,
NUMBER disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 4.
• To tune to a preset station, press the MANUAL/
PRESET button to select Preset and then press
the TUNING/CH (,.) button to select the
preset station.
About RDS Broadcasting
To show the RDS signals
You can see the RDS signals the station sends on the
display.
Press the RDS DISPLAY button while listening to an FM
station.
• Each time you press the button, the display change to
show you the following information : PS NAME RT
CT Frequency
PS
(Program
Service)
While searching, <PS NAME>
appears and then the station names
will be displayed. <NO PS> appears
if no signal is sent.
RT
(RadioText)
While searching, <RT> appears
and then text messages the station
sends will be displayed. <NO RT>
appears if no signal is sent.
Frequency
Station frequency (non-RDS service)
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional signal along
with their regular program signals.
For example, the stations send their station names, as
well as information about what type of program they
broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
Description on RDS function
• PTY (Program Type) : Displays the type of program
currently being broadcast.
• PS NAME (Program Service Name) : Indicates the
name of broadcasting station and is composed of 8
characters.
• RT (Radio Text) : Decodes the text broadcast by
a station (if any) and is composed of maximum 64
characters.
• CT (Clock Time) : Decodes the real time clock from the
FM frequency. Some stations may not transmit PTY, RT
or CT information therefore this may not be displayed
in all cases.
• TA (Traffic Announcement) : TA ON/OFF it shows that
the traffic announcement is in progress.
| NOTES |
RDS may not operate correctly if the station tuned is
not transmitting RDS signal properly or if the signal
strength is weak.
About characters shown in the display
When the display shows PS,or RT signals,the following
characters are used.
• The display window cannot differentiate upper case
and lower case letters and always uses upper case
letters.
• The display window cannot show accented letters,
<A,> for instance, may stands for accented <A’s> like
<À, Â, Ä, Á, Å and Ã.>
PTY (Program Type) indication and
PTY-SEARCH function
One of the advantages of the RDS service is that you
can locate a particular kind of program from the preset
channels by specifying the PTY codes.
To search for a program using the PTY codes
Before you start!
• The PTY Search is only applicable to preset stations.
• To stop searching any time during the process, press
5 button while searching.
• There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start from
step 1 again.
• When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
| 40 English
HT-F5500_30_50-XU_0529.indd 40
2013-05-29 오후 4:38:27
RDS DISPLAY
1
2
3
PTY-
PTY SEARCH
PTY+
4
5
6
1.
Press the PTY SEARCH button while listening to an
FM station.
2.
Press the PTY- or PTY+ button until the PTY code
you want appears on the display.
• The display gives you the PTY codes described
to the right.
3.
Press the PTY SEARCH button again, while the
PTY code selected in the previous step is still on the
display.
• The centre unit searches 29 preset FM stations,
stops when it finds the one you have selected,
and tunes in that station.
Using the Special Effects Remote
Control Buttons
SOUND
SOUND EFFECT Function
EFFECT
Lets you select a mode that optimizes the sound.
1.
Press the SOUND EFFECT button.
2.
Press the ▲▼ buttons to select the desired mode:
DSP, Dolby Pro Logic II or SFE Mode.
3.
Press the ◄► buttons to select the desired
sound effect.
DSP
MP3 Enhancer  Power Bass  Football  Virtual
7.1  Off
• MP3 Enhancer : Helps enhance your sound
experience (ex. mp3 music). You can upscale your
MP3 level sound (24 kHz, 8bit) to CD level sound
(44.1 kHz, 16bit).
• Power Bass : Increases the volume level of bass
tones and provides thudding sound effects.
• Football : Creates a more dynamic, realistic, stadium
like sound. For listening to football, soccer, and other
sporting events.
• Virtual 7.1 : Creates a virtual 7.1 CH sound using the
5.1 CH speaker system.
• Off : Select for normal listening.
• Matrix : Select to hear multi channel surround
sound.
• Pro Logic : Select to listen to a 2CH sound source
in 5.1CH surround sound with all speakers active.
- A specific speaker(s) may not output depending
on the input signal.
• Off : Select for normal listening.
SFE Mode
Symphony Hall in Boston (Hall 1)  Philharmonic
Hall in Bratislava (Hall 2)  Jazz Club in Seoul B
 Church in Seoul  Amphitheater (Rock)  Off
• Symphony Hall in Boston (Hall 1) : Provides a
clear vocal as if listening in a concert hall.
• Philharmonic Hall in Bratislava (Hall 2) : Also
provides a clear vocal as if listening in a concert
hall but, less powerful than HALL1.
• Jazz Club in Seoul B : Recommended setting for
Jazz.
• Church in Seoul : Gives the feel of being in a
grand church.
• Amphitheater (Rock) : Recommended setting for
Rock.
• Off : Select for normal listening.
3D Sound
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off  High  Low
| NOTES |
3D Sound is not available in FM mode.
English
HT-F5500_30_50-XU_0529.indd 41
Media Play
Dolby Pro Logic II
Movie  Music  Game  Matrix  Pro Logic 
Off
• Movie : Adds realism to a movie soundtrack.
• Music : When listening to music, you can
experience sound effects as if you are listening to
the actual performance.
• Game : Enhances the excitement of a game’s
sound.
05
TA
41 |
2013-05-29 오후 4:38:27
Media Play
TV SOUND
TV Sound
You can listen via Home theatre speakers or TV
Speaker with TV SOUND button.
1.
Connect the HDMI cable to TV and Home cinema.
(See page 17)
2.
Set the connected Home cinema and TV to
Anynet+ (HDMI-CEC) On.
3.
Press the TV SOUND button on the remote
control.
4.
Each time you press the TV SOUND button, TV
SOUND ON/OFF flashes shortly on the Display
part on the Front panel, then change to D.IN.
- TV SOUND ON : Output to Home theatre
speakers.
- TV SOUND OFF : Output to Anynet+
connected TV Speaker.
Use in this case:
1) If you want to listen to the sound via home
cinema speaker when you watch a TV.
2) If you want to listen to the sound from the USB
media that plugged to the TV via home cinema
speaker.
TV SOUND ON/OFF support specification
Connected TV
Anynet+
(HDMI-CEC)
supported TV
Anynet+
(HDMI-CEC) not
supported TV
Anynet+
(HDMI-CEC)
Setting
TV
Sound
ON
TV
Sound
OFF
ON
O
O
OFF
O
X
No operation
O
X
| 42 English
HT-F5500_30_50-XU_0529.indd 42
2013-05-29 오후 4:38:29
Network Services
You can enjoy various network services such as streaming
video or on-line apps by connecting the product to your
network.
Connect the product to the network.
(See page 18)
2.
Configure the network settings.
(See pages 24~26)
Logging In to Your Samsung
Account
Before you access Movies & TV Shows or Apps, we
suggest you log in to your Samsung account.
To log in to your Samsung account, follow these steps:
1.
With the Home screen displayed, press the RED (A)
button. The Log In screen appears.
2.
Select the Email field, and then press the E
button. The keyboard pop-up appears.
3.
Using the keyboard, enter your e-mail address.
When finished, select the Done button, and then
press the E button. The Log In screen re-appears.
4.
5.
Before Using Movies & TV Shows
or Apps
If you haven’t set up Smart Hub, when you use Movies &
TV Shows or Apps for the first time, the product will ask
you to perform the Smart Hub set up procedure.
1.
On the Home screen, select either Movies & TV
Shows or Apps, and then press the E button. If
you have selected Apps, go to Step 4.
2.
If you selected Movies & TV Shows, the Smart Hub
pop-up appears asking if you want to set up Smart
Hub. Select Yes, and then press the E button.
The Welcome screen appears.
Select the Password field, and then press the E
button. The keyboard pop-up appears.
3.
Using the keyboard, enter your password. When
finished, select the Done button, and then press the
E button. The Log In screen re-appears.
Select Start, and then press the E button. The
Smart Hub Terms & Conditions, Privacy Policy
screen appears.
4.
On the Smart Hub Terms & Conditions, Privacy
Policy screen, you must review and agree to both
the Smart Hub Terms and Conditions and the
Privacy Policy to use Smart Hub.
5.
Scroll down, and then click the View Details buttons
to review the full documents.
6.
When done reading, scroll up to the first entry field,
and press the E button to agree to the Terms and
Conditions and consent to the Privacy Policy.
7.
Press the ► button twice to go to the Supplemental
Privacy Notices screen.
8.
Click the View Details button to view the entire
notice.
9.
When done reading, scroll up to the top entry field,
and then press the E button.
6.
To make the log in process easier next time, select
Sign me in automatically, and then press the E
button.
7.
Select Log in, and then press the E button. The
product logs you in to your account. Your account
e-mail is displayed on the bottom left of the screen.
| NOTES |
If you selected Sign me in automatically, the next
time you log in, the product will automatically enter
your e-mail and password. All you need to do is select
Log In.
If your e-mail address and password are not displayed
when the Log In screen appears, select the button
with the down pointing arrow head next to the Email
field, and then press the E button. A drop down list
of all your registered accounts will appear. Select your
account, and then press the E button. The product
will fill in the e-mail and password fields.
| NOTES |
You do not need to consent to the Supplemental
Privacy Notice, but one or more Smart TV features or
functionalities may not be available if you do not.
10. Press the ► button twice. The Setup Complete
screen appears. Press the E button.
English
HT-F5500_30_50-XU_0529.indd 43
Network Services
1.
in, the My Account pop-up appears. On the pop-up,
you can select Logout, Change Account Information,
Link Service Accounts, Remove Accounts from the
Device, and Deactivate Account.
To rent movies and purchase for pay apps,you must
have a credit card registered in your account. If you
haven’t registered a card, select Change Account
Information. On the Change Account information
page, select Register Card, press the E button,
and then follow the directions on the screen.
06
To use network services, you must first:
If you press the RED (A) button after you have logged
43 |
2013-05-29 오후 4:38:31
Network Services
If you don't have a credit card associated with your
Using Movies & TV Shows
Samsung account, after you log in, the Register
Card screen will appear. Follow the directions on the
screen. You must have a credit card registered to your
account to rent movies and to purchase for-pay apps.
You can download or stream for pay and free-of-charge
movies and TV shows and view them on your TV.
Movies & TV Shows
Featured
Using Apps
Recommended
You can download the applications from the Internet, and
access various for pay or free-of-charge application and
view them on your TV. To access some applications, you
need to have a Samsung account.
The Apps Screen at a Glance
Favourites
Featured
Movies
TV Shows
Purchased
Apps
Recommended
1.
2.
On the Home screen, select Movies & TV Shows,
and then press the E button.
1
1
Select one of the Featured or Recommended
movies, and then press the E button. The page
for that movie appears.
OR
Web Browser
Use the ▼ button to go to the bottom of the screen.
Select Favourites, Featured, Movies, TV Shows,
or Purchased, and then press the E button.
On the page that appears, use the ▲▼◄► buttons
to select a show or movie, and then press the E
button.
On the TV Shows or Movies screen, you can also
select What's New?, Most Popular, or Genres to
see more available shows or movies. On the Genre
screen, use the ▲▼◄► buttons to select a Genre,
and then press the E button.
To make a selection on a page displaying TV shows
or movies, use the ▲▼◄► buttons to make a
selection, and then press the E button.
3.
To watch a selection, select Watch Now, and then
press the E button. A selection screen appears
listing various locations from which you can rent the
film along with prices.
4.
Select a location, and then press the E button.
Follow the directions on the screen to start the
movie.
2
3
4
2
5
Samsung
TV
My Apps
Apps
3
Apps
4
More Apps
1
Recommended : Displays recommended
contents managed by Samsung.
Gives you access to various for pay or free-ofcharge applications you can download.
2
Featured Applications : Use the ▲▼◄►
buttons to highlight the displayed Feature
Application, and then press the E button.
Information about the featured application
appears.
3
My Apps : Displays your personal gallery of
applications modifiable on the More Apps
screen.
4
More Apps : Select More Apps to access
the More Apps screen where you can add to,
modify, and delete applications and see all
downloaded applications.
| NOTES |
If you haven't logged into your Samsung account,
the Log in screen will appear after Step 3 and you will
need to log in.
| 44 English
HT-F5500_30_50-XU_0529.indd 44
2013-05-29 오후 4:38:32
1.
Select Apps on the Home screen, and then press
the E button.
1.
On the Apps screen, select Samsung Apps, and
then press the E button. The Samsung Apps
screen appears.
2.
On the Apps screen, use the ▲▼◄► buttons to
select an app, and then press the E button. The
app starts.
2.
Across the top of the screen, under What’s
New?, you'll see a series of new apps. Use the
◄► buttons to scroll the list right or left, and
then select an app. Press the E button to see
more information about the app. If the app is free,
select Download, and then press the E button
to download the app. If it is a for-pay app select
Buy, press the E button, and then follow the
instructions on the screen.
Using the More Apps Screen
More Apps
View : Date Downloaded
Network Services
Starting an Application
You can download for pay or free-of-charge applications
through Samsung Apps.
06
Downloading Applications
Options
1 /23
WebBrowser
Samsung Apps
| NOTES |
To buy an app, you must be logged into your
Samsung account and have a credit card registered to
the account. Press the RED (A) button on your remote
to log in.
If you haven’t registered a card, after you log in, press
the RED (A) button again, and then select Change
Account Information in the pop-up that appears. On
the Change Account information page, select Register
Card, press the E button, and then follow the
directions on the screen.
You can also access and download apps from
the categories listed on the left of the screen. For
instructions, see Step 4.
3. After the app has downloaded, select Run, and
then press the E button to run the app now.
To run the app later, press the RETURN button. In
either case, the icon for the app will appear on the
Apps screen.
4.
To see additional apps, use the ▲▼◄► buttons
to move to the category list on the left side of the
screen.
5.
Use the ▲▼ buttons to select a category. Each
time you move the highlight to another category, a
different set of applications appears on the right.
6.
Use the ► button to move to the applications and
the ▲▼◄► buttons to move from app to app.
7.
To see more information about an app, select it, and
then press the E button.
8.
To download the app, follow the directions in Steps
2 and 3.
WebBrowser
Storage
Category : XXXXX | Version : X.XXX | Size : XX.XKB
109.48 MB / 629.43 MB
The More Apps Screen lists all the apps you have
downloaded and lets you:
• Sort the apps on the More Apps screen by Date
Downloaded, Recently Opened, and Title.
• Apply a number of Options Menu functions to the
apps listed in the My Apps section of the Apps screen
including updating apps, moving apps into a folder,
deleting the apps from My Apps, and locking the apps.
• Start apps.
Sorting the Apps
To sort the apps on the More Apps screen, follow these
steps:
1.
On the Home screen, select Apps, and then press
the E button.
2.
On the Apps screen, use the ▼ button to move to
the More Apps hotspot at the bottom of the page,
and then press the E button.
3.
On the More Apps screen, use the ▲► buttons to
move to View at the top of the screen, and then
press the E button.
4.
In the drop down that appears, select Date
Downloaded, Recently Opened, or Title, and then
press the E button. The apps on the More Apps
screen are sorted by the criteria you have chosen.
English
HT-F5500_30_50-XU_0529.indd 45
45 |
2013-05-29 오후 4:38:37
Network Services
Using the Options Menu Functions
Delete an App from My Apps
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Edit My Apps, and then press the E
button. The Edit My Apps screen appears.
3.
Select the app you want to delete from My Apps,
press the E button, and then press the ▲▼◄►
buttons in the direction of the .
The Remove from My Apps pop-up appears.
4.
Select Yes, and then press the E button.
5.
When you return to the Apps screen, the app will
have been removed from the My Apps area.
Lock/Unlock
Using the Lock/Unlock function and the Security PIN, you
can lock applications so they cannot be started on either
the Apps screen or the More Apps screen. The default
PIN is 0000.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Lock/Unlock, and then press the E
button.
3.
When the Lock Service appears, enter the PIN
using the number buttons on your remote control.
4.
To lock an application, select the application, and
then press the E button. A lock appears on the
app. Repeat to lock other, individual apps.
5.
To unlock a locked app, select the application, and
then press the E button.
6.
To lock all the apps at once, use the ▲► buttons to
select the Lock All button, and then press the E
button.
7.
To unlock all the locked apps at once, use the ▲►
buttons to select the Unlock All button and then
press the E button.
8.
Press the RETURN button twice to return to the
Apps screen. Locked apps will display a lock on the
upper right side.
Move an App in My Apps
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Edit My Apps, and then press the E
button. The Edit My Apps screen appears.
3.
Select the app you want to move in My Apps, press
the E button, and then press the ▲▼◄► buttons
to move the app icon in the direction of one of the
arrows (<, >, ^, etc.) that appears around the app
icon. The app icon moves in the direction you have
chosen.
4.
After you have placed the app icon where you want,
press the E button.
5.
When you return to the Apps screen, the app will be
positioned in the location you had selected.
Edit My Apps
Edit My Apps lets you add apps to and delete apps from
My Apps. It also lets you change the position of an app in
My Apps.
Add an App to My Apps
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Edit My Apps, and then press the E
button. The Edit My Apps screen appears.
3.
Select a full colour app from the top row of apps,
and then press the E button. The full colour app
icon appears in the My Apps area below and the
app icon in the top row is grayed out.
| NOTES |
Create Folder
Create Folder lets you create a folder on the More Apps
screen into which you can put apps.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Create Folder, and then press the E
button. The Set Folder Name pop-up appears.
3.
Press the E button. The keyboard appears.
4.
Select the Clear button on the right side, and then
press the E button to remove Folder 1 from the
entry field. Then, using the keyboard, enter the
name you want to apply to the folder.
5.
When finished, select the Done button on the right
side, and then press the E button. The pop-up
reappears.
6.
Select OK, and then press the E button. The new
folder appears in the list of apps on the left side of
the screen.
Grayed out apps are already in My Apps.
4.
When you return to the Apps screen, the app will
appear in the My Apps area.
| 46 English
HT-F5500_30_50-XU_0529.indd 46
2013-05-29 오후 4:38:39
6.
Select OK, and then press the E button. The
folder is renamed.
Move to Folder lets you move apps to the folder of your
choice.
7.
Select Close on the right side of the screen, and
then press the E button.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Move to Folder, and then press the E
button. The Move to Folder screen appears.
3.
Use the ▲▼◄► buttons to move to an app, and
then press the E button to select the app. A
check appears in the upper left corner of the app.
4.
To deselect an app, press the E button. The
check disappears.
5.
Repeat Step 3 to select additional apps.
Delete
Delete lets you delete apps and folders from the My
Apps screen. If there are apps in a folder, both the folder
and the apps are deleted together. Delete removes apps
permanently. If you decide you want to use an app you
deleted, you will need to download it again.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Delete, and then press the E button. The
Delete screen appears.
To select all the downloaded apps, select Select All
3.
at the top right of the screen, and then press the E
button. To deselect all the apps, select Deselect All
at the top right of the screen, and then press the E
button.
6. When done, select Select folder at the top of the
screen, and then press the E button. The Select
Folder pop-up appears.
Use the ▲▼◄► buttons to move to an app, or
folder and then press the E button to select. A
check appears in the upper left corner of the app or
folder you selected.
4.
To deselect an app, press the E button. The
check disappears.
5.
Repeat Step 3 to select additional apps or folders.
| NOTES |
7.
In the Select Folder pop-up, use the ▲▼ buttons
to select the folder you want to move the apps you
selected to, and then press the E button.
8.
The Apps Moved pop up appears. Press the E
button.
9.
To open the folder, use the ▲▼◄► buttons to
highlight the folder, and then press the E button.
Rename Folder
Rename Folder lets you rename an existing folder.
1.
On the More Apps screen, use the ▲► buttons to
go to Options at the top of the screen, and then
press the E button.
2.
Select Rename Folder, and then press the E
button. The Rename Folder screen appears, and a
folder is highlighted.
3.
User the ▲▼◄► buttons to highlight a folder of
your choice, and then press the E button. The
Rename pop-up appears.
4.
Press the E button. The keyboard appears.
5.
Enter the new name for the folder. When finished,
select Done on the right side, and then press
the E button. The Rename popup reappears
displaying the new name.
| NOTES |
To select all the downloaded apps, select Select All
at the top right of the screen, and then press the E
button. To deselect all the apps, select Deselect All
at the top right of the screen, and then press the E
button.
6. After you have made all your selections, select
Delete at the top of the screen, and then press the
E button. The deleting pop-up appears.
7.
Select Yes, and then press the E button. All the
apps you selected are deleted.
| NOTES |
You cannot immediately delete a locked app or
folder. If you select a locked app or folder to delete,
when you perform Step 7, the Lock Service pop-up
appears. Enter the Security PIN into the pop-up, and
then press the E button. The lock will be released
and the app or folder will be deleted.
English
HT-F5500_30_50-XU_0702.indd 47
Network Services
1.
06
Move to Folder
47 |
2013-07-02 오전 9:41:50
Network Services
Update Apps
Link Browsing and Pointer Browsing
When the application require to update to the latest
version, select Apps and then select More Apps. On
the More Apps screen, select Apps to update, and then
select application from the list. The application starts
updating to the latest version. However, Apps to update
appears on the screen only when the update is required.
The Web Browser provides two types of browsing,
Pointer Browsing and Link Browsing. When you launch
the browser for the first time, Pointer Browsing is active.
If you are using a mouse to navigate in the Web Browser,
we recommend leaving Pointer Browsing active. If you
are using your remote to navigate in the Web Browser,
we recommend that you replace Pointer Browsing with
Link Browsing. Link Browsing moves a highlight from one
link to the next in the Web Browser and is much faster
than Pointer Browsing if you are using your remote.
Using the Web Browser
You can access the Internet using the Web Browser
application.
Select Web Browser on the Home screen, and then
press the E button.
To activate Link Browsing, follow these steps:
1.
Use the ▲▼◄► buttons on your remote to move
the pointer to the Link Browser icon on the top right
of the screen. The Link Browser icon is the third
icon from the right.
The pointer will be in the correct position if the icon
turns blue and the words “Link Browsing” appear
on the screen.
2.
Press the E button. Link Browsing is activated
and will remain active whenever you bring up the
Web Browser.
| NOTES |
When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV and BD Wise is on - the browser is maximized to fill
the screen and the TV's resolution is set to the optimal
resolution automatically.
The Web Browser is not compatible with Java
applications.
If you attempt to download a file, and the file cannot
be saved, an error message will appear.
E-commerce (purchasing products online) is not
supported.
ActiveX is not supported.
Access may be blocked to some websites or to web
browsers operated by certain businesses.
The Control Panel at a Glance
The Control Panel, which runs across the top of the
screen, has a series of icons which start a number of
useful functions. The icons are described below, starting
with the icon on the far left of the screen.
1
http://www.samsung.com
100%
| 48 English
HT-F5500_30_50-XU_0702.indd 48
2013-07-02 오전 9:42:22
•
•
1
•
•
•
•
•
•
•
Using the Keyboard Pop-up
When you click the http://www.samsung.com
, the
or access a data or text entry field, and
then press the E button, the keyboard pop-up appears.
http://www.samsung.com
1.
Use the ▲▼◄► buttons on your remote to move
the highlight to a letter or number of your choice.
2.
Press the E button to enter the letter or number
into the entry field.
3.
To access capital letters, move the highlight to the
Caps key on the top left, and then press the E
button. Press the E button again with the Caps
key highlighted to access small letters again.
4.
To access symbols and additional punctuation
marks, highlight the 123#& button on the left, and
then press the E button.
5.
To delete a character you entered, move the
highlight to the button, and then press the E
button.
6.
To delete all the characters you entered, move the
highlight to the Clear button, and then press the
E button.
7.
When finished entering, move the highlight to the
Done button, and then press the E button.
| NOTES |
If you have a wireless keyboard connected to your
product, you can use the wireless keyboard to enter
letters, numbers, symbols, and punctuation. Note
that the wireless keyboard will work only when the
keyboard popup appears and can only be used to
enter letters, numbers, symbols, and punctuation.
Options on the Keyboard Pop-Up
To access the keyboard pop-up options, highlight the
button on the bottom left of the keyboard, and then press
the E button.
Language
Select the language for the
keyboard. You can select English,
French, Russian, etc.
Recommended
Text
The keyboard will suggest
recommended words as you enter
text. You can turn this function On
or Off.
Predict Next
Letter
The keyboard will predict the next
letter as you enter letters. The
predictions appear in a ring around
the letter you have just entered.
You can select a predicted letter or
move to another letter. You can turn
this function On or Off.
100%
As you enter characters, recommended text will be shown.
Caps
123#&
ENG
3
4
Network Services
•
: Moves to the previous page.
: Moves to the next web page.
: Displays the Bookmarks and History
screen. You can bookmark the current page,
select an existing bookmark, and edit and
delete bookmarks. You can also view your
browsing history and select a page to revisit.
: Moves to the Home screen of the Web
Browser.
http://www.samsung.com
: Lets you enter a
page address manually using the keyboard
pop-up.
: Reloads the current page so that it is
refreshed on the screen.
: Adds the current page to your
bookmarks.
: Lets you search for
information by entering words or characters
using the keyboard pop-up. See Using the
Keyboard Popup on this page.
100% : Lets you enlarge or shrink the
screen by various percentages.
: Turns on the PIP function.
: Lets you switch between Pointer
Browsing and Link Browsing.
: Lets you configure the Browser’s
settings. See Using the Setting Menu on
page 50.
: Closes the Web Browser.
06
•
•
•
1
2
5
6
q
w
e
r
t
y
a
s
d
f
g
h
z
x
c
v
b
n
7
8
9
u
i
o
p
^
*
j
k
l
~
@
!
Done
m
,
.
?
-

Cancel
/

4

www. .com
0
Clear

To use the keyboard pop-up with your remote, follow
these steps:
English
HT-F5500_30_50-XU_0529.indd 49
49 |
2013-05-29 오후 4:38:42
Network Services
Using the Setting Menu
 Add current site : Lets you add
the currently displayed web site
to the Approved Sites list.
 Manage Approved Sites : Lets
you key in URLs to add to the
Approved Sites List and delete
sites from the Approved Sites
list. If you turn Approved Sites
on and have not added any sites
to the Approved Sites list, you
will not be able to access any
Internet sites.
The Setting menu contains functions that control how
the Browser operates and Browser security functions.
To open the Setting menu, highlight the
icon in the
Control Panel, and then press the E button. To select
an option in the setting menu, highlight the option, and
then press the E button.
http://www.samsung.com
100%
Enable Grabbing
Approved Sites
Private browsing on
Web Browser Settings
Help
Private
browsing
on/off
Enable or disable the Privacy mode.
When the Privacy mode is enabled,
the browser does not retain the
URLs of sites you visit. If you want
to enable Privacy mode, select OK.
If the Privacy mode is running, the
“Stop” icon appears in front of
the URL at the top of the screen.
To disable Privacy mode, select
it again when Privacy mode is
enabled.
Web Browser
Settings
 Set as homepage : You can set
the Browser's home page.
 Pop-up Block : Turns the Popup
Block on and off.
 Ad Block : You can determine
whether to block advertisements
and select the URLs for which
advertisements are blocked.
 General : You can delete
personal in information such as
website history and browsing
data (cookies, etc.), and reset
all web browser settings to their
factory defaults.
 Encoding : You can set the
Encoding setting for web pages
to Automatic or select the
encoding format manually from a
list.
 Pointer : You can set the speed
of the cursor when the cursor
is set to Pointer and turn Smart
Cursor On and Off.
 Browser Information : Displays
the version number and copyright
information for the Web Browser.
Close
Enable/
Disable
Grabbing
Turns the Grabber function On and
Off. When the Grabber function is
on, you can move a web page up
and down without dragging the
scroll bar.
The Grabber function is only
available in Pointer Browsing.
Approved
Sites
Lets you restrict your children’s
access to inappropriate web pages
by allowing access only to the web
sites you have registered.
Every time you access Approved
Sites, the PIN screen appears. The
first time you access Approved
Sites, enter the default PIN, 0000
using the number buttons on your
remote.
You can change the PIN using the
Reset password for the Approved
Sites function. See below.
 Approved Sites feature : Turns
the Approved Sites function on
or off.
 Reset password for Approved
Sites : Change the Approved
Sites password.
| 50 English
HT-F5500_30_50-XU_0529.indd 50
2013-05-29 오후 4:38:43
Help
BD-LIVE™
Provides basic information about
the operation of the Web Browser.
Setting functions may not be activated. Functions that
are not activated are greyed out and cannot be used.
Linking your Internet Service
Accounts to the Product
The Link Service Accounts function lets you link your
product to your accounts with Internet services that the
product can log you in to the service automatically when
you start the app for that service.
To create a service account link, follow these steps:
1.
Attach a USB flash drive to the USB jack on the
front of the product, and then check its remaining
memory. The memory device must have at least
1GB of free space to accommodate the BD-LIVE
services.
2.
Select Settings on the Home screen, and then
press the E button.
3.
Select Network, and then press the E button.
4.
Select BD-Live Settings, and then press the E
button.
5.
Select BD Data Management, and then press the
E button.
6.
Select Select Device, and then press the E
button.
1.
On the Home screen, press the RED (A) button on
your remote to log in to your Samsung Account.
2.
After you have logged in, press the RED (A) button
on your remote again.
3.
Select Link Service Accounts in the My Account
pop-up, and then press the E button.
4.
On the Link Service Accounts screen, select the
service you want to link to the product, and then
press the E button.
| NOTES |
5.
Select Register, and then press the E button.
The way you use BD-LIVE and the provided contents
6.
In the ID and Password screen, enter the ID you use
to log in to the service you selected using the popup keyboard. When finished, select Done, and then
press the E button.
7.
Repeat the same process for the password. When
finished select Done, and then press the E
button.
8.
Select OK, and then press the E button.
7.
Select USB device, and then press the E button.
8.
Insert a Blu-ray Disc that supports BD-LIVE.
9.
Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
may differ, depending on the disc manufacturer.
English
HT-F5500_30_50-XU_0529.indd 51
Network Services
Depending on the web site, some of the Web Browser
Once the product is connected to your network, you can
enjoy various movie-related service contents available on
BD-LIVE compliant discs.
06
| NOTES |
51 |
2013-05-29 오후 4:38:44
Appendix
Additional Information
Notes
Connections
HDMI OUT
• Certain HDMI output resolutions may not work,
depending on your TV.
• You must have a HDMI connection to enjoy videos
with 3D technology.
• A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Colour to Off in the menu.
Settings
3D Settings
• For some 3D discs, to stop a movie during 3D
playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once. The
Blu-ray menu appears. Press the 5 button again,
then select 3D Settings in the Blu-ray menu.
• Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
• Depending on the disc type, some aspect ratios
may not be available.
• If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
• If you select 16:9 Original, your TV may display 4:3
Pillarbox (black bars on sides of picture).
BD Wise (Samsung Products only)
• When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
• If the product is connected to a device that does
not support BD Wise, you can not use the BD Wise
function.
• For proper operation of BD Wise, set the BD Wise
option in both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you
will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby Digital,
DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
• This Digital Output setup does not affect the
analogue (L/R) audio or HDMI audio output to your
TV.
It affects the optical and HDMI audio output when
your product is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
• Digital Output can be activated when Speaker
Selection is set to TV Speaker.
BD-Live Internet Connection
• The Internet connection may be restricted while you
are using BD-LIVE contents.
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
• This function is not available if the HDMI cable does
not support CEC.
• If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
BD Data Management
• In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
• Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
USB 2.0 protocol with 4 MB/sec or faster read/write
speed.
• The Resume Play function may not work after you
format the storage device.
• The total memory available to BD Data Management
may differ, depending on the conditions.
| 52 English
HT-F5500_30_50-XU_0529.indd 52
2013-05-29 오후 4:38:45
• For more information about DivX(R) VOD, visit
“http://vod.divx.com”.
• Depending on the Blu-ray Disc / DVD, you may be
able to change the subtitle language in the Disc
Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
• This function changes both the primary and
secondary subtitles at the same time.
• The total number of primary and secondary subtitles
are displayed respectively.
Front Display
• You cannot change the brightness of the
and the VOL +, - button.
button
Speaker Settings
• When Speaker Selection is set to TV Speaker,
audio is produced through the TV speakers.
HDMI audio
• When HDMI audio is output to the TV speakers, it is
automatically down-mixed to 2 channels.
Playing JPEG files
Audio Return Channel
• You can’t enlarge the subtitle and PG graphic in the
full screen mode.
• When Anynet+ (HDMI-CEC) is Off, the Audio Return
Channel function is not available.
• Using an HDMI cable not certified for ARC (Audio
Return Channel) may cause a compatibility problem.
• The ARC function is only available if an ARCcompliant TV is connected.
Playback
Appendix
Selecting the Subtitle Language
07
DivX® Video On Demand
Media Play
Dolby Pro Logic II Mode
• Before selecting Dolby Pro Logic II mode, connect
your external device to the AUDIO INPUT jacks (L
and R) on the product. If you connect to only one
of the inputs (L or R), you cannot listen to surround
sound.
Playing Video files
Using the TOOLS button while playing pictures
• Video files with high bit rates of 20Mbps or more
strain the product’s capabilities and may stop
playing during playback.
Selecting the Audio Language
• The ◄► indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
• The languages available through the Audio
Language function depend on the languages that
are encoded on the disc. This function or certain
languages may not be available.
• Some Blu-ray Discs may allow you to select either
the PCM or Dolby Digital audio soundtrack in
English.
• If the system is connected to a BD Wise compliant
TV that has set BD Wise to On, the Picture Settings
menu will not appear.
• The Background Music function will not work unless
the music file and the photo file are located on the
same storage media. Also, sound quality can be
impacted by the bit rate of the MP3 music file, the
size of the photos, and the encoding method.
English
HT-F5500_30_50-XU_0529.indd 53
53 |
2013-05-29 오후 4:38:46
Appendix
Digital Output Selection
Setup
PCM
Connection
Audio
Stream on
Blu-ray Disc
Audio
Stream on
DVD
Definition for
Blu-ray Disc
Bitstream
(Unprocessed)
Bitstream
(Re-encoded DTS)
Bitstream
(Re-encoded
Dolby D)
HDMI supported AV receiver
PCM
Up to PCM 7.1ch
PCM
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Up to PCM 5.1ch
Dolby Digital
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Plus
Up to PCM 7.1ch
Dolby Digital Plus
DTS re-encoded
Re-encoded
Dolby Digital *
Dolby
TrueHD
Up to PCM 7.1ch
Dolby TrueHD
DTS re-encoded
Re-encoded
Dolby Digital *
DTS
Up to PCM 7.1ch
DTS
DTS re-encoded
Re-encoded
Dolby Digital *
DTSHD High
Resolution
Audio
Up to PCM 7.1ch
DTS-HD High
Resolution Audio
DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD
Master
Audio
Up to PCM 7.1ch
DTS-HD Master
Audio
DTS re-encoded
Re-encoded
Dolby Digital *
PCM
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Dolby Digital
Up to PCM 5.1ch
Dolby Digital
Dolby Digital
Dolby Digital
DTS
Up to PCM 7.1ch
DTS
DTS
DTS
Any
Decodes the main
Outputs only the
Decodes the main
feature audio and
main feature audio
feature audio and
Decodes the main
BONUSVIEW audio
stream so that your BONUSVIEW audio
feature audio and
stream together
AV receiver can
stream together
BONUSVIEW audio
into PCM audio and
decode the audio
into PCM audio and
stream together
adds Navigation
bitstream.
adds Navigation
into PCM audio and
Sound Effects, then
You will not hear
Sound Effects, then
adds Navigation
re-encodes the PCM
BONUSVIEW audio
re-encodes the
Sound Effects.
audio into Dolby
or Navigation Sound PCM audio into DTS
Digital bitstream or
Effects.
bitstream.
PCM.
 If the Source Stream is 2ch or mono, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may sound.
Navigation Sound Effects are different on each Blu-ray Disc.
| 54 English
HT-F5500_30_50-XU_0529.indd 54
2013-05-29 오후 4:38:46
Resolution according to the output mode
DVD playback
07
Blu-ray Disc/E-contents/Digital Contents playback
Setup
BD Wise
E-contents/
Digital contents
HDMI Mode
Blu-ray Disc
Resolution of Blu-ray
Disc
1080p@60F
480i
Appendix
HDMI Mode
Output
Auto
Max. Resolution of TV input
Max. Resolution of TV input
1080p@60F
1080p@60F
1080p@60F
Movie Frame : Auto (24Fs)
1080p@24F
-
1080i
1080i
1080i
720p
720p
720p
576p/480p
576p/480p
576p/480p
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed
below or if the instructions below do not help, turn off the product, disconnect the power cord and contact the nearest
authorized dealer or Samsung Electronics Service Centre.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the Blu-ray/DVD disc.
Blu-ray/DVD disc purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is
pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• The home cinema does not play sound during fast playback, slow playback,and step
motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all 6.
•
•
•
•
Dolby Digital 5.1 CH
Surround Sound is not
produced.
• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is
produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
On certain Blu-ray/DVD discs, sound is output from the front speakers only.
Check if the speakers are connected properly.
Adjust the volume.
When listening to a CD, radio or TV, sound is output to the front speakers only.
English
HT-F5500_30_50-XU_0529.indd 55
55 |
2013-05-29 오후 4:38:47
Appendix
Symptom
Check/Remedy
The remote control does
not work.
• Are you operating the remote within its operational range and within the proper angle relative
to the sensor?
• Are the batteries drained?
• Have you selected the mode (TV/BD) functions of the remote control (TV or BD) correctly?
• The disc is rotating but
no picture is produced.
• Picture quality is poor
and the picture is
shaking.
•
•
•
•
Audio language and
subtitles do not work.
• Audio language and subtitles will not work if the disc does not contain them.
The menu screen does
not appear even when the
menu function is selected.
• Are you using a disc that does not contain menus?
The aspect ratio cannot be
changed.
• You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer
to the Blu-ray Disc jacket and then select the appropriate function.
• The product is not
working.
(Example: The power
goes out or a strange
noise is heard.)
• The Product is not working
normally.
• Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
You have forgotten the
rating level password.
• With no disc in the product, press and hold the product's 5 button for longer
than 5 seconds. INIT appears on the display and all settings will return to the
default values.
Then, press the POWER button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio
broadcasts.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with
good reception.
While listening to TV audio
through the Product, no
sound is heard.
• If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the
D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV
audio is muted.
"Not Available" appears on
screen.
• The features or action cannot be completed at this time because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
• Press and hold the 5 button on front panel for more than 5 seconds with no disc
in the product. All settings will revert to the factory settings.
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
| 56 English
HT-F5500_30_50-XU_0529.indd 56
2013-05-29 오후 4:38:47
Symptom
Check/Remedy
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
AllShare function
I can see folders shared
through AllShare, but I
cannot see the files.
• AllShare only shows Video, Photo, and Music files. Other types of files are not
displayed.
Video is played
intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is not
overloaded.
• The wireless connection between the DLNA compatible device and the product is
unstable.
Check the connection.
The AllShare connection
between the product and
PC is unstable.
• IP address under the same subnetwork should be unique, otherwise IP collision can
results in such a phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
Appendix
• Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
07
No HDMI output.
BD-LIVE
I cannot connect to the
BD-LIVE server.
• Test whether the network connection is active by using the Network Status
function.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 52)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
When using the BD-LIVE
service, an error occurs.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 52)
| NOTES |
When the factory default settings are restored, all stored user BD data will be deleted.
Hereby, Samsung Electronics, declares that this Home Cinema System is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search
Product Support and enter the model name.
This equipment may be operated in all EU countries.
English
HT-F5500_30_50-XU_0529.indd 57
57 |
2013-05-29 오후 4:38:48
Appendix
Specifications
Weight
2.3 kg
Dimensions
430.00 (W) x 55.00 (H) x 252.00 (D) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
0.5 %
Video
1080p, 1080i, 720p, 576p/480p
Audio
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
165W x 2(3)
Centre speaker output
170W(3)
Surround speaker output
165W x 2(3)
Subwoofer speaker output
170W(3)
General
FM Tuner
HDMI
Amplifier
Analogue input : 20Hz~20kHz (±3dB)
Frequency response
Digital input : 20Hz~40kHz (±4dB)
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)500mV
| 58 English
HT-F5500_30_50-XU_0529.indd 58
2013-05-29 오후 4:38:48
5.1ch speaker system
Surround
Centre
Subwoofer
Impedance
3
3
3
3
Frequency
range
140Hz~20kHz
140Hz~20kHz
140Hz~20kHz
40Hz ~ 160Hz
Output sound
87dB/W/M
pressure level
87dB/W/M
87dB/W/M
88dB/W/M
Rated input
165W
165W
170W
170W
Maximum
input
330W
330W
340W
340W
Appendix
Front
07
Speaker
system
HT-F5500
95.0 x 146.0 x 74.0 95.0 x 116.0 x 74.0 227.0 x 95.0 x 74.0 170.0 x 350.4 x
287.0
Speaker
HT-F5530
Dimensions
(W x H x D)
(Unit : mm)
95.0 x 1112.0 x
74.5 (Stand base:
276.0 x 189.0)
95.0 x 116.0 x 74.0 227.0 x 95.0 x 74.0 170.0 x 350.4 x
287.0
HT-F5550
95.0 x 1112.0 x
74.5 (Stand base:
276.0 x 189.0)
95.0 x 1112.0 x
74.5 (Stand base:
276.0 x 189.0)
227.0 x 95.0 x 74.0 170.0 x 350.4 x
287.0
HT-F5500
0.37
Weights
(Unit : kg)
0.34
0.51
3.41
HT-F5530
2.86
0.34
0.51
3.41
HT-F5550
2.86
•
•
•
•
•
2.86
0.51
3.41
Network speeds equal to or below 10Mbps are not supported.
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
Design and specifications are subject to change without prior notice.
For the power supply and Power Consumption, refer to the label attached to the product.
English
HT-F5500_30_50-XU_0529.indd 59
59 |
2013-05-29 오후 4:38:49
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care centre.
Area
` Europe
AUSTRIA
BELGIUM
BOSNIA
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
GERMANY
CYPRUS
GREECE
HUNGARY
ITALIA
Contact Centre 
0810 - SAMSUNG (7267864, € 0.07/min)
Web Site
www.samsung.com
www.samsung.com/be
(Dutch)
02-201-24-18
www.samsung.com/be_fr
(French)
051 331 999
www.samsung.com
07001 33 11 , share cost tariff
www.samsung.com/bg
062 SAMSUNG (062 726 786)
www.samsung.com/hr
800 - SAMSUNG (800-726786)
www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 Praha 4
70 70 19 70
www.samsung.com
030-6227 515
www.samsung.com
01 48 63 00 00
www.samsung.com/fr
0180 6 SAMSUNG bzw.
0180 6 7267864*
www.samsung.com
(*0,20 €/Anruf aus dem dt. Festnetz, aus
dem Mobilfunk max. 0,60 €/Anruf)
8009 4000 only from landline
www.samsung.com/gr
80111-SAMSUNG (80111 726 7864) only
from land line
www.samsung.com/gr
(+30) 210 6897691 from mobile and land
line
06-80-SAMSUNG (726-7864)
www.samsung.com/hu
800-SAMSUNG (726-7864)
www.samsung.com
Contact Centre 
Area
Web Site
LUXEMBURG 261 03 710
MONTENEGRO 020 405 888
0900-SAMSUNG (0900-7267864) (€ 0,10/
NETHERLANDS
Min)
NORWAY
815 56480
0 801-172-678* lub +48 22 607-93-33 **
*(całkowity koszt połączenia jak za 1 impuls
POLAND
według taryfy operatora)
** (koszt połączenia według taryfy operatora)
PORTUGAL
808 20-SAMSUNG (808 20 7267)
08008 SAMSUNG (08008 726 7864)
ROMANIA
TOLL FREE No.
SERBIA
011 321 6899
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
SPAIN
902172678
SWEDEN
0771 726 7864 (SAMSUNG)
SWITZERLAND
0848 - SAMSUNG (7267864, CHF 0.08/
min)
U.K
EIRE
LITHUANIA
LATVIA
ESTONIA
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/pl
www.samsung.com
www.samsung.com/ro
www.samsung.com/rs
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
(German)
www.samsung.com/ch_fr
(French)
www.samsung.com
www.samsung.com
www.samsung.com/lt
www.samsung.com/lv
www.samsung.com/ee
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
AH68-02598B-03
HT-F5500_30_50-XU_0702.indd 60
2013-07-02 오전 9:42:43