Schneider Electric Splitter Boxes Specifications

AS-i Bus
Class 8340
CONTENTS
Schneider Electric Brands
Description
Page
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
TSXSAZ10 Master PLC Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
TSXSAY100 Master PLC Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PLC Programming/Other Gateways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Repeater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Addressing Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Push Button Control Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
12-Button Keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Inductive Proximity Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Photoelectric Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Illuminated Indicator Banks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Variable Drive Controllers for Asynchronous Motors . . . . . . . . . . . . . . . . . . . . . . . . 29
XALSZ1 (Spider) and ZB2BZ Interface Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
TELEFAST® SB2 Intelligent Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Intelligent Splitter Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cabling and Connection Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Cable Splitter Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Extension Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Power Supply Module and Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Insulation Control Relay for AS-i Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
AS-i Bus
General Information
NTERFACE
AS-i (Actuator Sensor Interface) is a bus made up of sensors and actuators with a very short response
time. AS-i is an open industry standard supported by the AS-i association. The leading manufacturers
of sensors, actuators, programmable controllers and connection accessories are members of this
association. AS-i has the advantage of not being a sole supplier network.
Connection to a higher level bus can be made through network gateways or by using a communication
bus controller (programmable controller, etc.).
Supply
AS-i Universal
Modules
AS-i Dedicated
Modules
Auxiliary
24 Vdc supply
Tools
Ground Fault
Monitor
AS-i Bus
AS-i Master
AS-i Dedicated
Products
IP 20 Enclosure
IP 65 or 67 Machine
S
AM6VGG
952SI
A
ASIC
The AS-i intelligence is based on an ASIC (Application Specific Integrated Circuit), which can either be
integrated directly into a sensor or actuator (known as an intelligent component), or in an interface
module which can accept up to 8 standard (non-intelligent) sensors and actuators. It is the ASIC which
manages all the communication functions of the sensor or actuator in order to supply information to the
AS-i master regarding switching state, operational availability of the sensor, etc.
Advantages of the AS-i Bus
Cabling: Data is transmitted by a standard cable consisting of a pair of non-twisted unshielded #16 or
#14 AWG (1.5 mm2 or 2.5 mm2) wires. The supply to the sensors and actuators is also provided by this
cable. The cable is installed directly on the machine, without having to fit any special components
(splitter blocks, etc.).
Installation: software tools, incorporated in PL7 products, make it possible to select bus components
and to enter the parameters for these components by way of the automation system configuration.
Maintenance: all services offered on the interfaces and “in-rack” I/O programming are included in the
PL7 tools, with screens for diagnostics, channel topology syntax, associated mnemonics, overriding of
variables, debugging zone, etc.
Summary of Advantages:
• Reduction in cost and volume of cabling.
• Reduction in size of enclosures.
• Capability for expanding and adapting existing machines is simplified.
• Increased availability and adaptability of sub-assemblies.
03/00
© 2000 Schneider Electric All Rights Reserved
3
AS-i Bus
General Information
Topology of the AS-i Bus
The topology of the AS-i bus is unrestricted. The lack of restrictions enables the most direct connections
to be made between the bus and the various sensors and actuators in an installation. The maximum
length of the AS-i bus is 328 feet (100 m) (including main runs and tap-off runs). Cable runs of up to 984
feet (300 m) are possible using repeaters (signal regenerators).
Point-to-point
Line
Tree
Ring
Connection of the AS-i cable is fast and is easily achieved by means of the IDCs (Insulation
Displacement Connectors) on splitter boxes, T-connectors, or tap-offs, which pierce the cable insulation
to make contact with the conductors. In the event of the IDCs being removed for circuit modifications,
the cable insulation self-seals.
Splitter box: connection base + splitter module
T-Connector
Master/Slave Bus
AS-i is a master/slave bus: all the slaves are managed by a single master. The master polls each of the
slaves present on the bus, in turn, and waits for a reply. The cycle time is 5 ms maximum, for 31 digital
slaves. Communications are always initiated by the bus master.
AS-i slaves are manufactured and have a configuration at delivery with the address 0. Prior to
implementing for the first time, an address must be assigned to each slave using an addressing terminal.
The dialog between the master and the slaves is achieved using a modulated carrier current utilizing an
alternating pulse modulation (APM) technique. This is also known as Manchester coding. An error
detection procedure provides excellent integrity of data transmission.
4
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
General Information
AS-i Masters
AS-i accepts different types of masters:
• The programmable controller master module incorporating an AS-i communication port, directly
transfers the data, transparently, to the PLC application program. The Premium PLC supports 1 to 8
AS-i masters; the Micro PLC supports 1 AS-i master.
• The gateway master converts the AS-i bus from a simple communication node to a higher level bus.
Gateways to higher level networks such as MODBUS Plus and Profibus DP are available from
various third-party vendors.
M
AS-i Bus Master
AS-i Bus
Other Bus
M
AS-i Port
Integrated into the PLC
Fipio/AS-i Gateway Master
M
M
03/00
© 2000 Schneider Electric All Rights Reserved
5
AS-i Bus
General Information
AS-i Slaves
An AS-i bus may be used with up to 31 slaves (each incorporating an ASIC) each consisting of 4 Input
bits and 4 Output bits for cyclical exchange of information with the master, plus 4 parameter bits allowing
extended functions (configuration, diagnostics, etc.). Each slave has its own address and a profile
(defining the exchange of variables). Intelligent sensors and actuators (incorporating an ASIC) can be
connected directly to the AS-i bus via passive splitter boxes or T-connectors.
Standard (non-intelligent) digital sensors or actuators are connected to the bus via intelligent splitter
boxes or cabling interfaces. The maximum number of standard units that may be connected is 248.
Many applications involve a mixture of both intelligent and standard (non-intelligent) sensors/actuators.
1
Passive T-connector
3
Intelligent splitter box
2
Passive splitter box
4
Cabling interface
1
AS-i Bus
3
2
4
31 Intelligent Components (Sensors or Actuators)
Basic Functions + Extended Functions
248 Standard Components, Maximum
Basic Functions
Each device connected on the AS-i bus is supplied via the AS-i cable from a special power supply
unit (PSU).
The rating of this PSU must be suitable for the total consumption of the devices on the bus. The PSU
may be located at any point of the bus.
Protocol
Centralized master/slave
Dialog Type
Cyclical polling
Refresh Time
5 ms for 31 slaves
Response Time
Max. time defined for each slave
Connection Points
31 slaves
Number of Standard Products
248 maximum
Data
4 status bits, 4 command bits, and 4 parameter bits per slave
Maximum Length of Bus
328 ft (100 m), 984 ft (300 m) with repeater
Network Characteristics
Supply and signal on the same cable
Physical Layer
2-core unscreened cable
“Actuator-Sensors Interface AS-i Bus” document XDOC5011EN contains basic information on the AS-i
bus for electricians, automation engineers, and specifiers. This document explains the AS-i concept,
recommendations for initial installation, and set-up.
6
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
General Information
Example – Bus Supply Only
2
3
1
11
4
9
5
7
8
4 5
10
9
6
1 2
3
-
+
0
5
6
8
5
12
13
7
5
1
2
3
TSXSAZ10
TSXSAY100
TSXSUPA0• or ABL6
XZSDE1113 + XZSDP
4
XZSDE11•3 + XZSDA••D••
5
XZCG0•20
6
ABE8•••S••0
7
8
9
10
11
12
13
XS7C40AS101 or XS8C40AS101
XUJ••••••AS
XALS200•
XBLC5012•581
XZCB1•••1
XZCG0122
ATV58EU••••
03/00
AS-i bus master for TSX Micro PLC’s or
AS-i bus master for TSX Premium PLC
Power supply unit for all sensors/actuators on the AS-i bus.
Passive splitter box allowing connection of two AS-i cables by IDCs.
Intelligent splitter box, comprising a connection module + a splitter module, allowing the connection of standard sensors
and actuators onto the AS-i bus (versions available: 2 I/2 O, 4 I, 4 O).
T-connectors allowing the connection (by IDC) of intelligent AS-i sensors and actuators to the AS-i bus.
TELEFAST SB2 intelligent interface allowing connection (by screw terminals) of standard sensors and actuators to
the AS-i bus.
Inductive proximity sensor, plug-in body, 5-position turret head
Photo-electric detectors, type compact XUJ.
Control station, with 2 pushbuttons, illuminated or not
12-way keypads, tactile feedback type.
Flat, unshielded, 2-core AS-i bus cable (yellow) with asymmetric profile, ensuring connection with the correct polarity.
Tap-off for flat cable.
Altivar 58 variable speed drives for asynchronous motors.
© 2000 Schneider Electric All Rights Reserved
7
AS-i Bus
General Information
Example – Bus Supply plus Auxiliary Power Supply
12
14
13
13
2
3
1
4
5
6
7
10
12
8
9
11
1
XZCB1•••1
2
XZCB1•••2
3
XZSDE1113 + XZSDP
4
XZSDE1143 + XZSDA22D12
5
XZMA1
6
XZSDE1113 + XZSDA40D3
7
XZSDE1133 + XZSDP
8
XZCG012•D
9
XZCG0122
10
XZSDE2213 + XZSDP
11
XZCG0120•C
12
13
14
TSXSUPA0• or ABL6
Master
Power supply unit, TSXSUPA05
8
Flat, unshielded, 2-core AS-i bus cable (yellow) with asymmetric profile, ensuring connection with the correct polarity.
Flat, unshielded, 2-core cable (black) for separate 24 Vdc power supply, with asymmetric profile ensuring connection with
the correct polarity.
Passive splitter box allowing connection of 2 yellow AS-i cables by means of IDCs.
Intelligent splitter box comprising a connection module + a splitter module, allowing connection of 2 standard sensors and
2 standard actuators onto the AS-i bus.
Repeater, for extending the line to increase the length of AS-i links by 328 ft (100 m) with 984 ft (300 m) max.
Intelligent splitter box comprising a connection module + a splitter module, allowing connection of 4 standard sensors onto
the AS-i bus.
Passive splitter box allowing connection of 2 cables by IDCs.
Tap-off, allowing connection (by IDC) to the AS-i bus; connection to the sensor or actuator by means of cable
(2 x 0.34 mm2) with M12 straight connector.
Tap-off, allowing connection (by IDC) to the AS-i bus; connection to the sensor or actuator by cable (2 x 0.34 mm2), bared
at the device end for connection via terminals.
Passive splitter box allowing connection of a black AS-i cable and a round cable by means of screw terminals.
Tap-off allowing connection (by IDC) to the AS-i bus; connection to the sensor or actuator by cable (2 x 0.34 mm2) with
M12 elbowed connector.
Power supply unit, for all the sensors/actuators on the AS-i bus.
AS-i bus master. TSXSAZ10 for TSX Micro PLC. TSXSAY100 for TSX Premium PLC.
Separate 24 Vdc power supply unit, for supply to all sensors and actuators with heavier power requirements.
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
TSXSAZ10 Master PLC Interface
MICRO AUTOMATION PLATFORM INTERFACE
Introduction
The TSXSAZ10 AS-i bus module enables the Micro PLC to act as the AS-i bus master. In this way up
to 31 sensor/actuator type devices may be managed on the one AS-i bus. Up to 4 inputs and/or outputs
can be connected to each device, giving a maximum of 248 I/O on one segment.
Sensors
XVA Indicator Bank
Micro + TSXSAZ10
AS-i Bus
XAL Control Station
Intelligent Sensors
XBL Keypad
Motor Starter
TSXSupA02
Power Supply
The AS-i bus consists of a master station (Micro PLC) and slave stations. The TSXSAZ10 module
supports the AS-i M2 profile, interrogates the device connected on the AS-i bus in turn and stores the
data (state of sensors/actuators, operational status of devices) in the PLC memory. Communication
management on the AS-i bus is completely transparent with regard to the PLC application program.
An AS-i power supply must be used for powering the various components on the AS-i bus. Ideally this
power supply unit (PSU) should be situated nearest to the stations with the largest current demands.
Description
The TSXSAZ10 AS-i bus master is a half-format module designed to slide into the basic configurations
of TSX37-10/21/22 Micro PLCs, in position 4 (one TSXSAZ10 module per configuration) ■.
The front panel consists of:
2
1. An opening with a locating device for routing AS-i bus ribbon or round cable (to be connected to a
terminal block inside the module).
2. Four indicator lamps:
3
— RUN: the module is active
— ERR: module fault or bus connection fault
1
— COM: AS-i bus communication is active
TSXSAZ10
— AS-i: bus configuration error
3. A push button to transfer the AS-i bus display to the PLC front panel.
■
03/00
When the TSXSAZ10 module is in position 4, the upper position 3 can only receive a TSXA•Z•••• analog or TSXCTZ••• counter
half-format module.
© 2000 Schneider Electric All Rights Reserved
9
AS-i Bus
TSXSAZ10 Master PLC Interface
Module Diagnostics
The Micro PLC centralized display block enables the display of the status of all the I/O channels, and
the diagnostics for devices on the AS-i bus (present, missing, faulty, not conforming to the configuration):
EXT
BASE
64 16
0
4
R I/O
64 16
64 16
8 12
3
1
2
RUN
12
0
4
8 12
9 13
1
5
9 13
14
2
6 10 14
7 11 15
15
3
7 11 15
12
12
0
4
8 12
13
13
1
5
9 13
6 10 14
14
2
6 10 14
3
7 11 15
13
14
2
DIAG
WRD
6
TER
> 1s.
DIAG
3
I/O
ERR
4
BAT
1. Device number
2. Control push button for accessing the various operating modes of the display block
3. State of the 4 device inputs
4. State of the 4 device outputs
Refer to page 14 for detailed programming information.
Selection
AS-i Bus Module
Description
AS-i bus master module
for TSX37-10/21/22
PLCs
Protocol
Number of I/O
Catalog Number
AS-i
31 devices, 248 I/O maximum
TSXSAZ10
Connections
TSXSAZ10 module
TSXSAZ10
AS-i cable
locking collar
+
-
10
AS-i bus cable - flat cable with
locating device or round cable
(+ brown, - blue)
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
TSXSAZ10 Master PLC Interface
Specifications
Type of Module
TSXSAZ10
Product Certifications
AS-i No. 04601, NF C 63-850
AS-i Profile
M2
Ambient Air Temperature
Operation: +32 °F to +140 °F (0 °C to +60 °C), Storage: -13 °F to +158 °F (-25 °C to +70 °C)
Degree of Protection
IP 20
Vibration Resistance
Conforming to IEC 68-2-6, Fc tests.
Shock Resistance
Conforming to IEC 68-2-27, EA tests.
Number of Connectable Slaves
31 AS-i slaves
Number of Inputs/Outputs
124 inputs and 124 outputs
Processing Times ■
Depending on the scan time of the PLC “Master Task”
10 ms
30 ms
60 ms
Average Processing Time
22 ms
50 ms
80 ms
Maximum Processing Time
35 ms
75 ms
135 ms
Bus Connection
By integral terminal within the module (interlock to maintain cable polarity)
Module Power Supply
Supplied directly from the PLC (100–240 Vac, 24 Vdc)
Display Diagnostics
By display panel integrated into the Micro PLC or via a suitable PC terminal using PL7 Micro/Junior
software.
Compliance Standards
UL Listed E194434 CCN NRAQ
CSA Certified LR58905 Class 2252 01
■
03/00
Execution Time
Defined as the time between an AS-i input being triggered and an AS-i output (on the same slave) being energized, including the
processing within the PLC program.
© 2000 Schneider Electric All Rights Reserved
11
AS-i Bus
TSXSAY100 Master PLC Interface
PREMIUM AUTOMATION PLATFORM INTERFACE
Introduction
The TSXSAY100 master module for the AS-i bus enables the Premium PLC to act as the AS-i bus
master. In this way, up to 31 sensor/actuator type devices may be managed on one AS-i bus. Up to 4
inputs and/or outputs can be connected to each device, giving a maximum of 248 I/O on one segment.
Sensors
XVA Indicator Bank
Premium + TSXSAY100
AS-i bus
AS-i bus
XAL Control Station
Intelligent Sensors
XBL Keypad
Motor Starter
TSXSUPA02
Power Supply
The AS-i bus consists of a master station (Premium PLC) and slave stations. The TSXSAY100 module,
which supports the AS-i M2 profile, interrogates the devices connected on the AS-i bus and stores the
data (status of sensors/actuators, operational status of devices) in the PLC memory. Communication
management on the AS-i bus is completely transparent with regard to the PLC application program.
An AS-i power supply must be used for powering the various components on the bus. Ideally, this power
supply unit (PSU) should be situated nearest to the components with the largest power demands.
Description
The TSXSAY100 AS-i bus master is a standard format module. It is designed to slide into any position
on the Premium rack except those reserved for the processor and power supply.
1
2
3
The module features, on the front panel:
1. A display unit comprising 4 indicator lamps showing the module operating modes:
— RUN: module operating
4
— ERR: module fault
— COM: AS-i bus communication active
5
TSXSAY100
— I/O: AS-i bus I/O fault
2. A display unit comprising 32 indicator lamps for diagnostics of the AS-i bus and of each Slave
connected to the bus.
3. Three indicator lamps specific to the module:
— AS-i: AS-i power supply fault
— Display Bus: display unit (2) is in Bus display
— Display I/O: display unit (2) is in Slave display (state of slave I/O)
4. Two push buttons used for local diagnostics of the AS-i bus.
5. One 3-way male SUB-D connector for connection to the AS-i bus (female connector supplied).
The maximum number of TSXSAY100 modules per PLC station depends on the type of processor
installed. See “Selection” on page 13.
12
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
TSXSAY100 Master PLC Interface
Module Diagnostics
The TSXSAY100 module display unit displays the status of all the I/O channels (Slave mode) and is
used for diagnostics of devices on the AS-i bus (Bus mode):
Bus Mode
Slave Mode (SLV)
Displays the address of the selected
Slave.
Displays image of the AS-i bus; each
LED 1 to 31 corresponds to a Slave
address on the bus.
0
1
2
3
4
5
6
7
•
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Displays status of I/O bits of the
selected Slave.
24
25
26
27
28
29
30
31
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Display Bus
Display Bus
Display Bus
Display I/O
Display I/O
Display I/O
24
25
26
27
28
29
30
31
ON
Selection
Description
Protocol
Number per PLC
Number of I/O
Catalog Number
AS-i
2 for 51-10
4 for 57-20
8 for 57-30
8 for 57-40
31 devices or 248 I/O
maximum
TSXSAY100
AS-i bus master module for
Premium PLCs
Specifications
TSXSAY100
Type of Module
TSXSAY100
Product Certifications
AS-i No. 18801, NF C 63-850
AS-i Profile
M2
Ambient Air Temperature
Operation: +32 °F to +140 °F (0 °C to +60 °C), Storage: -13 °F to +158 °F (-25 °C to +70 °C)
Degree of Protection
IP 20
Vibration Resistance
Conforming to IEC 68-2-6, Fc tests.
Shock Resistance
Conforming to IEC 68-2-27, EA tests.
Number of Connectable Slaves
31 AS-i slaves
Number of Inputs/Outputs
124 inputs and 124 outputs
Processing Times ■
Depending on the scan time of the PLC “Master Task”
AS-i Cable Connections
10 ms
30 ms
60 ms
Average Processing Time
27 ms
33 ms
45 ms
Maximum Processing Time
37 ms
55 ms
80 ms
Bus Connection
By 3-way SUB-D connector
Module Power Supply
Power supply integrated on Premium PLC
(100–240 Vac, 24 Vdc)
Diagnostics
Via centralized display unit on Micro PLC or on TSXSAY100 module and the diagnostics function of PL7
Micro, PL7 Junior, and PL7 Pro software.
Compliance Standards
UL Listed E194434 CCN NRAQ
CSA Certified LR58905 Class 2252 01
■
03/00
Execution Time
Defined as the time between the appearance of an input, its processing by the PLC processor, and the activation of an output on
the same slave device.
© 2000 Schneider Electric All Rights Reserved
13
AS-i Bus
PLC Programming/Other Gateways
Software Setup
The AS-i bus is configured using PL7 Micro/Junior/Pro software. The utilities available are based on the
principle of simplicity:
• Management of profile tables, parameters, and data by the master (this management is transparent
to the user).
• Topological I/O addressing: each AS-i slave declared on the bus is assigned a topological address
on the bus by the user. This is transparent to the user.
• Each sensor/actuator on the AS-i bus is treated as an in-rack I/O by the Micro/Premium PLC.
AS-i Bus Configuration
All devices on the AS-i bus are configured implicitly using the following sequence of screens:
Declaration of the AS-i bus master module
• The TSXSAZ10 module is always inserted and
declared in position no. 4 on TSX37-10 or
TSX37-21/22 PLCs.
• The TSXSAY100 module is inserted into any
position on TSX57, TPMX57, or TPCX57 PLCs
(except the position reserved for processors and
power supply).
Configuration of the AS-i slave devices
Using the configuration screen, it is possible to
configure all the slave devices (1 to 31), i.e. all
248 I/O. Configuration for each device consists of
defining, according to case:
• Groupe Schneider AS-i devices. The user selects
the AS-i device catalog number from the various
product families. This selection determines the
AS-i profile and the parameters associated with the
device.
• Third party AS-i devices. The user can use PL7
Micro/Junior software to manage a “customized” list
of sensors/actuators of different brands. This list,
specifying the AS-i profile and parameters, is
compiled to meet the needs of the user.
The configuration screen is also used to:
• Associate a symbol with each AS-i input or output
(up to 32 characters)
• Define the default position of the actuators for all
devices (set to state 0 or maintained) should the
Micro/Premium PLC stop.
Programming
After configuration, the I/O connected on the AS-i bus are processed by the application program in the
same way as a PLC in-rack I/O, using either the address (e.g. I\4.0\16.2, input 2 of slave 16 of the
AS-i bus) or the associated symbol (e.g. Start_conveyor).
14
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
PLC Programming/Other Gateways
Software Diagnostics
Diagnostics performed using the centralized display unit on the Micro PLC or using the centralized
display unit on the TSX SAY 100 module of the Premium PLC can be completed using an FTX517
terminal or PC compatible with PL7 Micro/Junior/Pro software.
The terminal connected to the Micro/Premium
PLC is used for operational diagnostics of the
TSXSAZ10 and TSXSAY100 master modules,
the AS-i bus and the slave devices on the AS-i
bus.
1
2
Diagnostics are performed using a single
screen divided into four sections providing
information on:
1. Operational status of the TSXSAZ10 or
TSXSAY100 module (RUN, ERR,
I/O status).
2. Status of the AS-i channel connected to the
module.
3. Faulty slave.
3
4
4. Data relating to any selected slave (profile,
parameters, forcing).
In the event of an AS-i module or channel fault,
a second screen can be accessed, which
clearly shows the type of fault, which may be at
internal or external level.
Network Gateways
This is a partial listing of AS-i network gateway products. For up-to-date information,
visit www.as-interface.com.
03/00
Network
Example Hosts
Product Name/
Catalog Number
Vendor
Phone
Website
DeviceNet
Allen-Bradley PLCs
GWAS/DN
Lumberg
(804) 379-2012
www.lumbergusa.com
DeviceNet
Allen-Bradley PLCs
VAG-DN-K5
Pepperl+Fuchs
(330) 425-3555
www.pepperl-fuchs.com
Interbus-S
Modicon PLCs
Siemens PLCs
VAG-IBS-K1
Pepperl+Fuchs
(330) 425-3555
www.pepperl-fuchs.com
Interbus-S
Modicon PLCs
Siemens PLCs
IBS ST ASI DIO
Phoenix Contact
(800) 888-7388
www.phoenixcon.com
MODBUS
Most PLCs
VAG-MOD-KF-R4
Pepperl+Fuchs
(330) 425-3555
www.pepperl-fuchs.com
Profibus DP
Siemens PLCs
GWAS/DP
Lumberg
(804) 379-2010
www.lumbergusa.com
Profibus DP
Siemens PLCs
VAG-PB-KF-R4
VAG-PB-G4F-R4
Pepperl+Fuchs
(330) 425-3555
www.pepperl-fuchs.com
Profibus FMS
Siemens PLCs
GWAS/DP-FMS
Lumberg
(804) 379-2011
www.lumbergusa.com
© 2000 Schneider Electric All Rights Reserved
15
AS-i Bus
Repeater
The repeater allows an AS-i link to be extended by 328 feet (100 m). The
maximum length of the bus becomes 984 feet (300 m). The repeater is
connected directly to the flat AS-i cable by insulation displacement
connectors (IDCs). There is electrical insulation between the segments.
Selection
Description
Catalog Number
Repeater
XZMA1
XZMA1
Dimensions
XZMA1
Ambient Air Temperature
Operation:
+32 °F to +130 °F (0 °C to + 55 °C)
Storage:
-13 °F to +167 °F (-25 °C to + 75 °C)
Degree of Protection
IP 67
Material
Plastic
Connection
To yellow AS-i cable
Power Supply
By the AS-i cable
Current Consumption
45 mA per AS-i segment (90 mA
total)
Operational Voltage
Depending on AS-i specification
(18.5 to 31.6 Vdc)
Insulation
Electrical insulation between the
segments
Indication
One green LED per segment
Response Time
6 µs per message (12 µs per
exchange)
0.87
22
0.28
7
Dual Dimensions:
inches
mm
2.36
60
(1)
4.65
118
Pending
Ø0.2
Ø5
Approvals
Ø0.39
Ø10
Specifications
4.21
107
(3)
0.18
4.6
(2)
1.3
33 1.54
0.17
4.3
0.91
23
39
(1) LED
(2) Master side
(3) Extension side
Connections
Examples
M
P
P
S
S
328 ft
100 m
S
M = Master
P = Power supply
S = Slaves
S
328 ft
100 m
P
P
P
M
S
S
328 ft
100 m
16
S
S
164 ft
50 m
© 2000 Schneider Electric All Rights Reserved
S
164 ft
50 m
S
S
S
328 ft
100 m
03/00
AS-i Bus
Addressing Terminal
The addressing terminal is used to set and change the addresses of AS-i slave devices. It is lightweight,
hand-held, and powered by a rechargeable battery. A battery charger is included.
Selection
Description
Catalog Number
Addressing terminal
Battery operated. Battery charger included.
For addressing intelligent modules, splitter boxes
and AS-i slaves.
XZMC11US
Connection cable adaptors
Cable length: 0.5 m (Spare parts)
For connecting addressing terminal XZMC11 to
slaves fitted with socket (proximity sensors
XS7/XS8, keypads, illuminated indicator banks,
variable speed controllers ATV 58, interface
modules LA9Z, and TELEFAST SB2, etc.)
XZMG12
For connecting addressing terminal XZMC11 to
splitter boxes XZSCA•••••
XZMG13
Reference manual “AS-i sensor/actuator bus” (in
English)
XD0C5011EN
Documentation
XZMC11
XZMG11
Specifications
Ambient Air Temperature
Operation: +32 °F to +130 °F (0 °C to + 55 °C) Storage: -4 °F to +131 °F (-20 °C to + 55 °C)
Degree of Protection
IP 20
Power Supply
By rechargeable batteries
Charge Time
14 hours
Operating Time
8 hours (fully charged batteries) or 250 read/writes
Display
13 mm LCD screen
Keypad
4 key membrane
Connection
To AS-i slave: direct using M12 connector or by cable adaptor XZMG11 (see page 54)
To splitter module: direct
Overload and Short-circuit
Protection
Yes
Functions
+1 address, -1 address, write address, read address
Error codes
F1: overload, F2: connection not made, F3: slave fault, LOW BAT: recharge batteries
Dimensions
8.23
209
XZMC11
3.15
80
03/00
1.18
30
Dual Dimensions:
inches
mm
© 2000 Schneider Electric All Rights Reserved
17
AS-i Bus
Push Button Control Stations
Selection
Description
Operator Colors
Control stations with 2 spring return flush
push buttons, Ø 22 mm
Control stations with 2 spring return flush illuminated
push buttons, Ø 22 mm ■
■
Catalog Number
Push button “I” (N/O contact): White
Push button “O” (N/C contact): Black
XALS2001
Push button “I” (N/O contact): Green
Push button “O” (N/C contact): Red
XALS2002
Push button 1 (N/O contact): Green
Push button 2 (N/C contact): Red
XALS2003
Illuminated push buttons with interchangeable LEDs.
Dimensions
XALS2001, XALS2002
XALS2003
Common face view
Rear housing
XALS2001, XALS2002
1.89 =
=
2.01
2.44 51
62
51
2.68
68
0.55
14
0.55
14
=
=
=
=
1.18
30
4.09
104
4.09
104
2.68 48
68
=
=
2xØ0.17
2xØ4.3
=
=
2.68
68
= 1.57 =
= 2.1340 =
54
Dual Dimensions:
XALS2003
Connections
XALS200
1
2
+ AS-i
4
3
– AS-i
Enclosure with one red and one black blank legend plate. For legend plates in other colors or with
markings (must be ordered separately), please refer to the Square D Digest 172.
18
© 2000 Schneider Electric All Rights Reserved
03/00
inches
mm
AS-i Bus
Push Button Control Stations
Environment
Product Certifications
AS-i No. 06301
Ambient Air Temperature
Operation: -13 °F to +158 °F (-25 °C to +70 °C), Storage: -40 °F to +158 °F (-40 °C to +70 °C)
Degree of Protection
IP 65
Vibration Resistance
15 g (f = 40 to 500 Hz) conforming to IEC 68-2-6
Shock Resistance
70 g conforming to IEC 68-2-27 (push buttons)
Materials
Polycarbonate enclosure, colored gray RAL 7035 and grey RAL 7021
Enclosure Flame Resistance NF C 20-455: 1760 °F (960 °C), UL 94: V0
Connection
M12 connector
Electrical Specifications
Power Supply
From the AS-i bus
Current Consumption
from Bus
< 40 mA (XALS2001 and XALS2002), < 80 mA (XALS2003)
Contact Blocks
1 N/C and 1 N/O, 24 V, 5 mA
LEDs of Illuminated
Push Buttons
24 Vdc, 20 mA (XALS2003)
Short-circuit Protection
Yes, for the LED indicators
Compliance Standards
UL Listed E164353 CCN NKCR
Data Exchange Specifications
AS-i Profile
Bit value
0
1
State D0 (I)
Push button “I” unoperated
(N/O contact open)
Push button “I” operated
(N/O contact closed)
State D1 (I)
Push button “O” operated
(N/C contact open)
Push button “O” unoperated
(N/C contact closed)
Data Bits (Commands)
(only applicable to
XALS2003)
Bit value
0
1
Command D2 (O)
Green indicator off
Green indicator illuminated
Command D3 (O)
Red indicator off
Red indicator illuminated
Parameter Bits
Parameters P0 to P3
Not used
Data Bits (Status)
03/00
S3.F
© 2000 Schneider Electric All Rights Reserved
19
AS-i Bus
12-Button Keypads
Selection
Description
Mounting Method
12-button keypads
Marked 0 to 9, +, - (1)
Flush mounting
Catalog Number
XBLC5012F581
Surface mounting
XBLC5012R581
Dimensions
9
6
3
+
(1)
(2)
(4)
XBLC5012F581
1.16
29.5(1)
0.92
2.58 23.3
65.6
(3)
(1) Connection by screw terminal plug-in block
=
=
2.33 +0.5
0
+0.02
2.83 59.2 0
72
(1) Spacers, solder lugs and nuts included
(2) Alternative mounting using M3 screws, length 0.5 inches (12 mm), not included
(3) 0.06 inches (1.5 mm) nominal
(4) Holes Ø0.13 inches (Ø3.2 mm) (2)
0.89
22.5 (1)
3.09
78.5
(1) Connection by screw terminal plug-in block
8
5
2
0
9
6
3
+
1.17
29.7
+0.02
6xØ0.13 0
+0.5
6xØ3.2 0
(1)
=
92
3.52
89.5
XBLC5012R581
7
4
1
-
3.84
97.5
Panel cutout and mounting holes
3.15
80
XBLC5012R581
=
=
1.97
50 3.19 –0.02
–0.5
3.62 81
0.57
14.5
Ø0.47 (1)
Ø12 (1)
3.58
91
8
5
2
0
=
=
1.97
50
3.08 +0.02
0
78.2 +0.5
0
3.52
89.5
7
4
1
-
3.33
84.7
Panel cutout and mounting holes
3.15
80
XBLC5012F581
=
2.44 –0.02
62 –0.5 2.87
73
(1) 0.55 inches (14 mm), maximum
Dual Dimensions:
Connections
Rear view
– AS-i
20
Mounting precaution
When mounting the keypad on a metal support, the support
must be grounded.
+ AS-i
© 2000 Schneider Electric All Rights Reserved
03/00
inches
mm
AS-i Bus
12-Button Keypads
Specifications
These dust and damp protected compact keypads incorporate tactile feedback and are particularly
suited to the majority of industrial applications.
The keypads are constructed using a single piece elastomer membrane, with the keys molded in, and
the whole assembly is fixed to a mounting base plate (2 mounting methods: flush mounting or surface
mounting).
The degree of protection with respect to the panel is provided by the compression of the elastomer
membrane in the event of flush mounting or by a gasket in the event of surface mounting.
Environment
Product Certifications
AS-i No. 08701
Ambient Air
Temperature
Operation: +23 °F to +158 °F (-5 °C to +70 °C), Storage: -40 °F to +176 °F (-40 °C to +80 °C)
Degree of Protection
IP 65
Key Colors
Gray RAL 7032 and beige RAL 1019
Mechanical Life
3 million operating cycles
Key Travel
0.08 inch (2 mm)
Operating Force
2 N (7 ounces), with tactile feedback
Mounting
Flush or surface mounting
Connection
Screw terminal plug-in block, 1 x 16 AWG (1 x 1.5 mm2)
Electrical Specifications
Power Supply
From the AS-i bus
Current Consumption from bus
< 80 mA
Compliance Standards
UL Listed E164353 CCN NKCR
Data Exchange Specifications
AS-i Profile
S0.F
Data Bits (Status)
Key No. pressed
0
1
2
3
4
5
6
7
8
9
-
+
None
Bit value
Parameter bits
03/00
State D0 (I)
0
1
0
1
0
1
0
1
0
1
0
1
1
State D1 (I)
0
0
1
1
0
0
1
1
0
0
1
1
1
State D2 (I)
0
0
0
0
1
1
1
1
0
0
0
0
1
State D3 (I)
0
0
0
0
0
0
0
0
1
1
1
1
1
Hexadecimal
0
1
2
3
4
5
6
7
8
9
A
B
F
Parameters P0 to P3: not used
© 2000 Schneider Electric All Rights Reserved
21
AS-i Bus
Inductive Proximity Sensors
Sensors
Flush Mountable in Metal
Nominal sensing
distance (Sn)
0.39 inches (10 mm)
0.59 inches (15 mm)
0.79 inches (20 mm)
XS1M30AS101
XS7C40AS101
XS8C40AS101
Product Certifications
AS-i No. 16901
AS-i No. 10001
Ambient Air
Temperature
Operation: -13 °F to +158 °F (-25 °C to +70 °C) Storage: -40 °F to +185 °F (-40 °C to + 85 °C)
Degree of Protection
IP 67
Shock Resistance
50 g, 11 ms conforming to IEC 68-2-27
Vibration Resistance
25 g at 55 Hz, amplitude ± 2 mm, f = 10 to 55 Hz, conforming to IEC 68-2-6
Materials
Nickel plated brass
PEI
PEI
Connection
Pre-cabled with moulded M12 end
connector.
Cable length: 2.62 ft (0.8 m)
Screw terminals ■
Screw terminals ■
Operating Zone
0.08 to 0.31 in (2 to 8 mm)
0.12 to 0.47 in (3 to 12 mm)
0.16 to 0.63 in (4 to 16 mm)
Repeat Accuracy
3% of Sr (2)
Differential Travel
1 to 15% of Sr ▲
3 to 20% of Sr ▲
3 to 20% of Sr ▲
Delays
First-up: ≤5 ms; response: ≤ 2 ms; recovery: ≤ 2 ms
Maximum Switching
Frequency
150 Hz
Indicators
Output: yellow LED
Alarm ◆: red LED
Power Supply
From the AS-i bus
Current Consumption
from Bus
≤35 mA
Compliance
Standards
UL Listed E164353 CCN NKCR
Non Flush Mountable
Selection
Catalog Number
Specifications
Output: yellow LED
Alarm ◆: red LED
Output: yellow LED
Alarm ◆: red LED
Data Exchange Specifications
AS-i Profile
S1.1
Data Bits (Status)
Bit value
0
1
State D0 (I)
Signal “off”
Signal “on”
State D1 (I)
Alarm “on” (3)
Alarm “off”
State D2 (I)
Sensor out of service
Sensor in service
Data Bits (Commands) Command D3 (O)
Parameter Bits
■
▲
◆
●
22
Not used
Bit value
0
Parameter P0
Not used
Parameter P1
Not used
Parameter P2
Not used
Parameter P3
Flash “on” ●
1
Flash “off”
Terminal capacity: 2 x 16 AWG. Cable gland not included with sensor. Cable gland XSZPE13 to be ordered separately.
Sr = Real sensing distance: sensing distance measured at rated supply voltage and at rated ambient temperature
(0.9 Sn - Sr - 1.1 Sn).
Indication of detection of an object outside the correct operating zone of the sensor (see LED function table, page 23).
Diagnostic function. Quick location of the sensor by its flashing yellow LED.
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Inductive Proximity Sensors
Dimensions
XS1
XS7, XS8
1.18
30
1.57
40
0.79
20
1.57
40
(1)
0.98
25
(4)
2.03
51.5
(2)
(1) Cable, length 2.62 ft (0.8 m)
2.36
60
4.61
117
2.36
60
(1)
2xØ0.21
2xØ5.3
(3)
=
0.63
0.94 16
1.61 24
41
Dual Dimensions:
(1) Output or “flash” function LED
(2) Alarm LED
inches
mm
1.18
1.57 30
40
=
(3) 1 tapped entry for No. 13 plastic cable gland
(4) 2 elongated holes 0.21 x 0.28 in (5.3 x 7 mm)
Setting-Up
Minimum Mounting Distances, inches (mm)
XS1
Side by side
Face to face
XS7, XS8
Side by side
Face to face
e2
e1
e2
e1
Facing a metal object
Mounted in a metal support
Facing a metal object
Mounted in a metal object
h
d
e3
h
e3
XS1 (1)
e1 ≥ 20
e2 ≥120
e3 ≥ 30
d ≥30, h ≥0
Mounting nut tightening torque: < 50 N m
■ Flush mountable in metal. ▼ Non flush mountable in metal
XS7 ■
XS8 ▼
e1 ≥ 40
e1 ≥ 80
e2 ≥ 120
e2 ≥ 160
e3 ≥ 45
e3 ≥ 80
h≥0
h ≥ 40
Connections, LED Function Table
0.2 Sn
0.8 Sn
Sn
1.2 Sn
Object/sensor distance
1
2
+ AS-i
4
3
– AS-i
1
2
3
4
Output
1
1
1
0
0
0●
1▲
0◆
0◆
1
Yellow LED
+ AS-i
– AS-i
Bit D0
Alarm
Bit D1
Red LED
● The alarm is immediately triggered when an object is detected within the zone
0 to 0.2 Sn.
▲ Correct detection when 0.2 Sn < S < 0.8 Sn.
◆ Delayed triggering. The alarm will be triggered if an object passes within the
zone 0.8 to 1.2 Sn and its time of passing exceeds 160 ms.
03/00
© 2000 Schneider Electric All Rights Reserved
23
AS-i Bus
Photoelectric Sensors
Type of Unit
Back Cover ■
Complete Detectors
1
2
System
Thru-beam 1
Polarized reflex 2
Diffuse with background suppression 1
Type of Transmission
Infra-red
Red
Infra-red
Nominal Sensing Distance (Sn)
49.2 ft (15 m)
19.7 ft (6 m) ▲
2.3 ft (0.7 m)
3.94 ft (1.2 m)
–
XUJK103534AS ●
XUJK063539AS
XUJK703538AS
XUJK123538AS
XUJZAS1
–
–
Selection
Catalog Number
Specifications
Product Certifications
AS-i No. 06201
Ambient Air Temperature
Operation: -13 °F to +140 °F (-25 °C to +60 °C). Storage: -40 °F to +176 °F (-40 °C to +80 °C)
Vibration Resistance
7 g (f = 42 to 150 Hz), amplitude ± 1.5 mm (f = 5 to 42 Hz), conforming to IEC 68-2-6
Shock Resistance
30 g, duration 11 ms, conforming to IEC 68-2-27
Degree of Protection
IP 65
Connection
M12 connector
Materials
Case : PEI; window (polarized model) : PMMA
PEI
Maximum Switching Frequency 200 Hz
–
Delays
First-up: ≤ 15 ms; response: ≤ 2 ms; recovery: ≤ 2 ms
Power Supply
From the AS-i bus
Indicators
Output: yellow LED. Verification of correct operation: green LED. Alarm: red LED (4)
–
< 70 mA (with
associated
detector)
Current Consumption from Bus < 70 mA
Compliance Standards
UL Listed E164353 CCN NKCR
Data Exchange Specifications
AS-i Profile
S1.1
Data Bits (Status)
Bit value
0
1
State D0 (I)
No object present
Object present
State D1 (I)
Alarm “on” ◆
Alarm “off” (4)
State D2 (I)
Not used
Data Bits (Commands)
Command D3 (O)
Not used
Parameter Bits
Bit value
0
Parameter P0
Not used
■
Parameter P1
Inversion of D0
Parameter P2
Not used
Parameter P3
Not used
1
Non inversion of D0
The replacement of the back cover of a standard XUJ solid state output detector by this cover enables the detector to be
connected directly to the AS-i bus.
The detectors which may be adapted are: XUJK06353 (reflex system), XUJK063539 (polarized reflex system), XUJK103534
(thru-beam system), XUJK703538 and XUJK123538 (diffuse system with background suppression).
NOTE: The bit D1 is unusable when the XUJZAS1 cover is used on an XUJK703538 or XUJK123538 detector.
▲
●
◆
24
With Ø80 mm reflector XUZC80.
Reference of thru-beam system receiver. The receiver must be used in conjunction with a standard XUJM1000D2 transmitter
(incorporating an M12 connector) with the supply (pins 1 and 3) either being powered from:
a separate 12 or 24 Vdc supply (current consumption ≤15 mA), or
the AS-i bus via interface module XZSDA•••••. Supply via an output of an interface module (4 Outputs model XZSDA04D•• or
2 Inputs/2 Outputs model XZSDA22D••, see pages 44 to 47), enables the emitter to be turned on/off for testing purposes.
Indication of weak reception of the transmitted beam, which could be a result of dirty lenses on the detectors, a high degree of
pollution in the atmosphere or disturbance of the optical alignment. Not applicable to diffuse system detectors (see LED function
table, page 25).
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Photoelectric Sensors
Dimensions
Detection Curves
Thru-beam system
∅ of beam
cm 10
6
2
59 ft
18 m
-6
-10
Sn
Sn
Diffuse system (side approach recommended
∅ of beam
cm
∅ of beam
cm
10
6
4
2
0
-2
-4
-6
Ø 0.79
Ø 20
0
-2
Polarized reflex system
2
0
-2
26 ft
8 m
49 ft
15 m
0.16 ft
2.3 ft
3.94 ft
0.05 m
0.7 m
1.2 m
-6
-10
Sn 20 ft
Sn 6 m
Sn
Sn
2.3 ft
0.7 m
Sn 3.94 ft
Sn 1.2 m
Object 20 x 20 cm (1 White 90% 2 Black 6%)
With reflector XUZC80
Excess gain curves
Thru-beam system
1
2
6
ambient temperature: +77 °F (+25 °C)
Polarized reflex system with XUZC80 reflector
gain
gain
500
40
30
20
100
50
10
10
5
5
0.1 0.2 0.4 0.8
0.6 1
1
2 3 5 1015 20
4 6
D (m)
1 m = 3.28 ft
Variation of usable sensing distances
XUJK703538AS
(Diffuse system)
Potentiometer at maximum
Potentiometer at minimum
B
2 3
5 7 10 D (m)
4 6 9
Dimensions
XUJK••••••AS
0.10
2.6 (6)
XUJZAS1
2.64
67
(1)
(3)
1.07
27.2
0.79
20
1.07
27.2
0.51
13 (4)
B
0.1 0.2 0.4 0.8
0.6 1
0.05
1.35
1
S (m)
1 m = 3.28 ft
B
0.67
17
B
A 0.05
1.3 1.5
1.1
A 0.05
S (m)
1 m = 3.28 ft
0.7 0.8 S (m)
0.65
1 m = 3.28 ft
A-B: Object reflection coefficient
Black 6%
Gray 18%
Sensing range
2
0.39
10
0.39
10
1.28
32.6
2.48
63
Dual Dimensions:
inches
mm
Thru-beam and reflex systems
Diffuse system
No object present in the beam
Object present in the beam
No object present in the beam
Object present in the beam
P1 = 1
D0=0
D0=1
D0=0
D0=1
P1 = 0
D0=1
D0=0
D0=1
D0=0
+ AS-i
– AS-i
XUJZAS1 backcover connections to
associated detector
Blue
White
Brown
Black
BK
OG
0.79
20
4
3
BU
WH
BN
0.39
10
0.35
9
LED function table
Yellow LED illuminated for D0=1, green LED: verification of correct operation
Parameters
1
(2)
(1) LEDs
(4) Receiver (R) and Transmitter (T) are reversed on diffuse system detectors with
(2) 1 elongated hole Ø0.17 x 0.55 in (Ø4.2 x 14 mm).
background suppression.
(3) Sensitivity potentiometer.
(5) Front mounting Ø0.16 in (Ø4 mm) screws and inserts supplied.
(6) Applicable only to polarized reflex system detectors.
White 90%
Non detection zone
Connections
Connector
0.39
10
0.39
10
3.35
85
Potentiometer at minimum
0.35
9
XUJK12358AS
Potentiometer at maximum
0.4 0.5
0.35
3.35
85
A 0.05
3.89
98.85
S (m)
1m = 3.28 ft
2.46
62.5
1.18
30 (5)
0.6 0.7 0.8
1.18
30
A 0.05
Orange
03/00
1
2
3
4
5
6
Test output
Thru-beam and reflex systems
Verification of correct operation
Thru-beam and reflex systems
Red LED
Signal
level
Bit D1
1
0
D1 = 0: alarm “on”
D1 = 1: alarm “off”
t = 160 ms
t
t
1.2
1
0.8
Green LED
Red LED
–
Optimum
alignment
© 2000 Schneider Electric All Rights Reserved
+
25
AS-i Bus
Illuminated Indicator Banks
Illuminated indicator banks are visual or audible signalling units used mainly to indicate machine
operation sequences and to check status from a distance. The illuminated units are visible throughout
360°. Examples: machine stop - start, no material, call technical staff, fault indication, etc.
Supplied as sub-assemblies for user assembly of up to 4 units (illuminated or audible). The column
comprises:
• a base, incorporating terminal block, cable clamp, and support tube mountings,
XVAS102
• an AS-i adaptor unit,
• 1 to 4 colored lens units (green, red, orange, blue, clear, yellow) or audible signalling unit,
• a top cover, where necessary,
• optional accessories that include an anodized aluminium support tube, height 3.94 in (100 mm),
15.75 in (400 mm) or 31.5 in (800 mm) and support plate.
The units stack vertically and are each locked by a single screw. Electrical connections between each
unit are made automatically during assembly.
Choice of panel mounting:
XVAC6•••••
• either directly by the base using 2 screws, or
• using the support plate (4 mounting screws) and support tube.
Supply connections to the illuminated and audible units are brought out to terminals incorporated in the
base unit.
The AS-i adaptor unit is connected to the bus using a plug-in terminal.
XVA34
AS-i Adaptor Unit
Description
Catalog Number
AS-i adaptor unit (the adaptor must be the lowest unit on the column)
XVAS102
Illuminated Lens Units
XVAC37
XVAC9•
Description
Signal
High intensity xenon
“flash” lamp (Maximum of
1 unit per indicator bank,
mounted at top)
With discharge circuit
Integral tube
Illuminated lens units
Steady light
Bulb not included ■
Supply Voltage
Color
Catalog Number
24 Vdc
Green
XVAC63C0241
Red
XVAC64C0241
12 to 48 Vac/dc ▲
+
Flashing light
Bulb not included ■
XVAC21
XVA-C02
24 to 48 Vac ▲
XVAC07
■
▲
Orange
XVAC65C0241
Blue
XVAC66C0241
Clear
XVAC67C0241
Green
XVAC33
Red
XVAC34
Orange
XVAC35
Blue
XVAC36
Clear
XVAC37
Yellow
XVAC38
Green
XVAC43
Red
XVAC44
Orange
XVAC45
Blue
XVAC46
Clear
XVAC47
Bulb type for direct supply units: BA 15d base fitting incandescent, see page 27.
When using with an AS-i adaptor unit, the maximum supply voltage for steady or flashing illuminated units must not exceed 48V.
NOTE: Illuminated indicator banks are supplied as sub-assemblies, for assembly by the user.
Each unit is packed individually and marked with its respective catalog number. Maximum number of units per bank: 4 illuminated
units or 3 illuminated units + 1 audible unit (mounted immediately above the AS-i adaptor unit).
XVA-C01
XVA-C06
XVA-C12
26
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Illuminated Indicator Banks
Audible Signalling Units
Description
Signal
Audible signalling units, 90 db at 3.28 ft (1 m)
Supply Voltage
Catalog Number
Continuous
12 to 48 Vdc
XVAC911
Intermittent
12 to 48 Vdc
XVAC921
Mounting Units
Description
Catalog Number
Base unit + cover
For bank without high intensity “flash” lamp
Base unit only
For bank with high intensity “flash” lamp
Complementary mounting accessories for
tube mounting
Tube only
Tube/support mounting plate
Sealing gaskets
XVAC21
XVAC07
3.94 in (100 mm)
XVAC02
15.75 in (400 mm)
XVAC03
31.5 in (800 mm)
XVAC04
Plastic
XVAC01
Metal
XVAC11
Side mounting bracket for tube/support
mounting plate or base unit
Metal
XVAC12
Dust and damp protecting
For base unit
XVAC05
For tube support
XVAC06
Accessories and Spare Parts
Description
Catalog Number
Set of sealing gaskets
For IP 54 degree of protection of the indicator bank
XVAC082
Bulbs, incandescent
BA 15d base fitting
(Sold in lots of 10)
For illuminated units
DL1BA012
12 V - 5 W
24 V - 6.5 W
DL1BL024
48 V - 6 W
DL1BA048
Environment
Product Certifications
AS-i No. 06401
Ambient Air Temperature
Operation: +14 °F to +122 °F (-10 °C to +50 °C), Storage: -4 °F to +158 °F (-20 °C to +70 °C)
Degree of Protection
IP 42 (mounted vertically, direct base mounting)
Vibration Resistance
5 g (f = 10 to 500 Hz) conforming to IEC 68-2-6
Shock Resistance
25 g, 11 ms conforming to IEC 68-2-27
Materials
Unit housing: polycarbonate. Base and top cover: glass reinforced polyamide
Illuminated and Audible Signalling Unit Specifications
Rated Insulation Voltage
Ui: 250 V conforming to IEC 947-1
Supply Voltage
(for use with AS-i adaptor unit)
12 to 48 Vac or Vdc
Consumption
Standard flashing light unit: 24 Vac: 250 mA
High intensity xenon flashing light unit: 24 Vdc: 350 mA maximum (720 mA at switch-on)
Audible unit: 12 to 48 Vdc: 10 to 50 mA
Rated Impulse Withstand Voltage
U imp = 4 kV conforming to IEC 947-1
Bulb/Lamp type
Illuminated units with steady or flashing circuit: BA 15d base fitting bulbs, minimum power: 5 W, maximum power: 7 W
Illuminated units with high intensity “flash” lamp (internal xenon tube): 13.6 cds (integrated luminosity) with clear lens
Audible Signalling Unit
90 db at 1 m, signal continuous or intermittent. Fundamental frequency : 3 kHz
Connection
Screw and captive cable clamp terminals, capacity: 2 x 14 AWG (2 x 2.5 mm2)
AS-i Adaptor Unit Specifications
Power Supply
From the AS-i bus
Current Consumption from Bus
< 80 mA
Output Relay
Relay contact 12 to 48 Vac or Vdc
Type
Maximum current
No. of operating cycles
1A
1 million
AS-i Profile
S8.F
Data Bits
Bit value
0
1
(Commands)
Command D0 (O)
Unit 1 “off”
Unit 1 “on”
Command D1 (O)
Unit 2 “off”
Unit 2 “on”
Command D2 (O)
Unit 3 “off”
Unit 3 “on”
Command D3 (O)
Unit 4 “off”
Unit 4 “on”
Parameter Bits
Parameters P0 to P3
Not used
Indicators
Units 1 to 4: yellow LEDs. Supply: green LED
Compliance Standards
UL Listed E164353 CCN NKCR
03/00
© 2000 Schneider Electric All Rights Reserved
27
AS-i Bus
Illuminated Indicator Banks
DIMENSIONS
Illuminated indicator banks
without high intensity “flash” lamps
with high intensity “flash” lamp (4)
Dual Dimensions:
(4)
inches
mm
b
(1)
(5)
(4)
(3)
b
(3)
(2)
(1)
=
=
1.65
42
Ø 2.68
68
Number of illuminated or
audible signalling units (3)
1
2
3
4
(1) XVAC21
(2) XVAS102
b
6.26 in (159 mm)
8.31 in (211 mm)
10.35 in (263 mm)
12.4 in (315 mm)
(2)
(1)
=
(3) XVAC3 •, C4 • or C9 •
(4) LEDs
Tube XVAC0• and support plate XVAC
Number of illuminated or
audible signalling units (3)
0
1
2
3
(1) XVAC07
(2) XVAS102
1.65 =
42
Ø 2.68
Ø 68
b
9.17 in (233 mm)
11.22 in (285 mm)
13.27 in (337 mm)
15.31 in (389 mm)
(3) XVAC3 •, C4 • or C9 •
(4) XVAC6•••••
(5) LEDs
Panel cut-out
For direct mounting
For tube mounting on support plate
4xØ5/M5
(1)
(1)
1.65
42
0.63
16
b
(1)
=
2.13
54
2.13
54
2 x Ø4 or M4
XVA
C02
C03
2.48 in
14.29 in
b
(63 mm)
(363 mm)
(1) Tube, Ø0.98 in (Ø25 mm)
=
2.13
54
C04
30.04 in
(763 mm)
(1) Ø0.98 in (Ø25 mm)
Dual Dimensions:
Ø 2.68
68
inches
mm
Mounting, Connections
Mounting the units
Connections base (viewed from above)
Supply connections to illuminated
and audible signalling units
AS-i adapter unit
Unit 4
+/
Unit 3
D3
D2
D1
D0
Unit 2
–/
ASI
BUS
– AS-i
Unit 1
+ AS-i
XVAS102
Base XVAC21, C07
(1)
28
(2)
(1) Supply to audible and illuminated units
(2) Supply to AS-i unit
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Variable Drive Controllers for Asynchronous Motors
ATV58HU.tif
ALTIVAR® 58 DRIVE CONTROLLER INTERFACE
Description
The TELEMECANIQUE® ALTIVAR 58 drive controller range is used to control asynchronous electrical
motors with a power of 0.37 to 15 kW for 200/240 Vac single-phase and 200/240 Vac – 380/500 Vac
3-phase power supply voltages.
Based on the concept of sensorless flux vector control, it can offer a range of high performance levels:
wide range of speed, low duty torque, powerful acceleration and braking, adaptive tuning to motors and
an energy saving function. The range is available in three versions, offering greater flexibility in
installation and setup:
ATV58HU••••
• Standard drive controller with heatsink (ATV58HU)
• Drive controller on a base plate (ATV58PU)
• Drive controller fitted in IP55 enclosure (ATV58EU)
Conforming to standards IEC, UL, and CSA, the ALTIVAR 58 drive controller range can be used for
applications in the industrial and commercial sectors using simple or complex machines: mechanical
handling machines, conveyors, lifts, packing and packaging machines, textile machines, timber
machines, pumps, compressors, fans, air-conditioners, kneaders, etc.
Modularity of Communication Functions
ATV58PU.tif
ALTIVAR 58 drive controllers include a RS485 multidrop serial link (MODBUS RTU protocol) as
standard and communication cards equipped with various protocols (Interbus-S, AS-i, MODBUS PLUS,
Fipio, Uni-Telway, MODBUS) as options to meet the need for integration in remote architectures.
ATV58Parts.eps
Description
ATV58PU••••
ATV58EU.tif
Green LED: AS-i Power
Red LED: AS-i Fault
Removable terminals for
connection of AS-i bus
ATV58EU••••
03/00
© 2000 Schneider Electric All Rights Reserved
29
AS-i Bus
Variable Drive Controllers for Asynchronous Motors
ALTIVAR 58 Drive Controller Functions
Start-Stop Commands via the AS-i Bus
The AS-i bus communication card is used to perform the following commands:
• Forward operation
• Reverse operation
• Normal stop on deceleration ramp
• Fast stop
• DC injection stop
• Freewheel stop
• Reset faults (for drive controller reset)
Speed Commands via the AS-i Bus
One of the following operating modes can be selected:
• 2 directions with 4 preset speeds
• 1 direction with 7 preset speeds
• + fast/– fast
Selection is via the AS-i bus, using parameters P1 and P2.
Speed Commands via Analog Input
Inputs AI1 and AI2 can be used to receive a frequency setpoint.
The Start/Stop commands are sent via the AS-i bus.
Control via the AS-i Bus
Input bits (state) D2 and D3 can be assigned as and when required.
Local Configuration on ATV58 Drive
Controller (Terminal or PC)
Function
Parameter Entry via AS-i Bus
D0
Fault/Ready
–
–
D1
Off/On
–
–
Sensor signal
–
D2
Assignment of LI3
Local forcing
–
Sensor signal
Assignment of LI4
Local forcing
Frequency threshold reached
D3
High speed reached
Frequency reference reached
Parameter P3
Assignment of R2
Current threshold reached
Thermal threshold reached
30
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Variable Drive Controllers for Asynchronous Motors
Communication Card
Description
AS-i card
Connector
For Drive Controllers
Catalog Number
Removable terminals
ATV 58 all ratings
VW3A58305
Length
Catalog Number
6.56 ft (2 m)
XZCG0122
Cord
Description
Tap-off for one cable
Connections
Standard drive controller with heatsink, drive controller on a base plate
XZCG0122 tap-off for one cable
XZCB●●01 flat cable for AS-i bus
Drive controller fitted in IP55 enclosure
Open cut-outs, fitted with plugs
to allow the routing of cables
equipped with connectors.
XZCG0122 tap-off for one cable
XZCB1 flat cable for AS-i bus
03/00
© 2000 Schneider Electric All Rights Reserved
31
AS-i Bus
Variable Drive Controllers for Asynchronous Motors
Specifications
Product Certification
Ambient Air Temperature
AS-i
Pending
Operation
+14 °F to +104 °F (-10 °C to +40 °C)
Storage
-13 °F to +149 °F (-25 °C to +65 °C)
UL Listed E164874 CCN NMMS
CSA Certified LR96921 Class 3211 06
Compliance Standards
Electrical Specifications
Current Consumed
On the AS-i bus
30 mA
Communication Specifications (parameter entry by default, factory setup)
Profile
7.D
Data Bits (Commands)
Stop
Forward operation
Reverse operation
Fault reset
D0 (Out)
=0
=1
=0
=1
D1 (Out)
=0
=0
=1
=1
Stop modes
Frequency Specification
Normal
Fast
DC injection
braking
Freewheel
LSP + AI
SP2
SP3
HSP
D2 (Out)
=0
=1
=0
=1
=0
=1
=0
=1
=1
D3 (Out)
=0
=0
=1
=1
=0
=0
=1
=1
=1
Data Bits (Status)
32
Value of bit = 0
Value of bit = 1
D0 (In)
Fault
Ready
D1 (In)
Off
On
D2 (In)
Logic input LI3 off
Logic input LI3 on
D3 (In)
Logic output R2 off
Logic output R2 on
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
XALSZ1 (Spider) and ZB2BZ Interface Boards
Adaptors for Control and Signalling Units
Description
Signalling Mode of
Illuminated Indicator
Interface-2 inputs/2 outputs
Inputs for digital contacts
Outputs for 24 Vdc LEDs DL1CJ024• ■
Steady
Interface-4 inputs/4 outputs for printed circuits
Inputs for digital contacts
Outputs for indicators
■
Mounting Position
Catalog Number
-
XALSZ1
Steady
Steady or flashing depending
on parametering
Vertical
ZB2BZS2V
Horizontal
ZB2BZS2H
Vertical
ZB2BZS1V
Horizontal
ZB2BZS1H
Green LED: DL1CJ0243, red LED: DL1CJ0244, yellow LED: DL1CJ0245
Dimensions
XALSZ1
0.59
15
0.39
10
1.5
38
XA2BZ
5.91
150
2.05
52
ZB2BZS•H
5.91
150
ZB2BZS•V
2.37 ± 0.004
1.63
41.5
Ø 0.17
4.2
1.29
32.78
1.3
33
1.63
41.5
0.75
19
0.94
24
Ø 0.17
4.2
2.37 ± 0.004
60.1 ± 0.1
Ø 0.17
4.2
0.75
19
60.1 ± 0.1
0.33
8.33
(3)
0.1
2.54(1)
(2)
0.33
8.33
0.33
8.37
Ø 0.17
4.2
0.28
7
2.16 ± 0.01
54.8 ± 0.15
0.21
5.21
0.94
24
(1) 16 x Ø 1 mm pins on 2.54 mm pitch
(2) AS-i θ pin
0.10
2.54(1)
0.33
8.37
(3)
(2)
2.16 ± 0.01
54.8 ± 0.15
Dual Dimensions:
inches
mm
(3) AS-i ⊕ pin
Connections
XALSZ1
AS-i +
Push button 2
Indicator 2
BK
IN 2
BK
IN 2
GR
OUT 2
GR
OUT 2
– AS-i
BK
IN 1
BK
IN 1
GR
OUT 1
GR
OUT 1
ZB2BZS••
Push button 1
Indicator 1
Connection example
I1
I2
I3
I4
O1
O2
O3
O4
+ 24 V
+ 24 V
0V
O1
I1
O2
I2
O3
I3
O4
I4
+ 24 V
0V
Prog
NC
AS-i +
AS-i –
03/00
© 2000 Schneider Electric All Rights Reserved
I2
I3
I4
O2
O3
O4
Prog
I1
O1
AS-i –
24 V
A2
AS-i +
0V
Inhibition
0V
33
AS-i Bus
XALSZ1 (Spider) and ZB2BZ Interface Boards
Specifications for AS-i Adaptor, XALSZ1
Ambient Air Temperature
Operation: -13 °F to +158 °F (-25 °C to + 70 °C)
Storage: -40 °F to +158 °F (-40 °C to + 70 °C)
Degree of Protection
IP 20
Connection
By 2 wires, each 4 x 22 AWG (4 x 0.5 mm2)
Supply
From the AS-i bus
Current Consumption from Bus
< 80 mA
Inputs
For 2 digital N/C or N/O contacts: 24 Vac, 5 mA
Outputs
For 2 LED indicators: 24 Vdc, 20 mA
With short-circuit protection
Compliance Standards
UL Recognized E164353 CCN NKCR2
AS-i Profile
S3.F
Data Bits
(Status)
Data Bits
(Commands)
Parameter Bits
Bit value
0
1
State D0 (I)
Push button 1, contact open
Push button 1, contact closed
State D1 (I)
Push button 2, contact open
Push button 2, contact closed
Bit value
0
1
Command D2 (O)
Indicator 1 off
Indicator 1 on
Command D3 (O)
Indicator 2 off
Indicator 2 on
Parameters P0 to P3
Not used
Specifications for AS-i Adaptors, ZB2BZS••
Product Certifications
AS-i No. 16801
Ambient Air Temperature
Operation: +14 °F to +131 °F (-10 °C to + 55 °C)
Storage: -40 °F to +158 °F (-40 °C to + 70 °C)
Degree of Protection
IP 20
Connection
To printed circuit: 16-pin on 2.54 mm pitch
Power Supply
From the AS-i bus
Current Consumption from Bus
< 280 mA
Inputs
For 4 digital N/C or N/O contacts: 24 Vac, 5 mA
Outputs
For 4 LED indicators: 24 Vdc, 1.2 W, 50 mA max. per output
With overload and short-circuit protection
Watchdog: output = 0 after 30 ms of non polling of the slave by the master
Indication
LED indicators for inputs, outputs, and supply
Compliance Standards
UL Recognized E164353 CCN NKCR2
AS-i Profile
ZB2BZS1•: S7.F; ZB2BZS2•: S7.0
Data Bits
(Status)
Data Bits
(Commands)
Parameter Bits
for ZB2BZS1•
Parameter Bits
for ZB2BZS2•
34
Bit value
0
1
State D0 (I)
Push button 1, contact open
Push button 1, contact closed
State D1 (I)
Push button 2, contact open
Push button 2, contact closed
State D2 (I)
Push button 3, contact open
Push button 3, contact closed
State D3 (I)
Push button 4, contact open
Push button 4, contact closed
Bit value
0
1
Command D0 (O)
Indicator 1 off
Indicator 1 on
Command D1 (O)
Indicator 2 off
Indicator 2 on
Command D2 (O)
Indicator 3 off
Indicator 3 on
Command D3 (O)
Indicator 4 off
Indicator 4 on
Bit value
0
1
Parameter P0
Indicator 1 on (flashing)
Indicator 1 on (steady)
Parameter P1
Indicator 2 on (flashing)
Indicator 2 on (steady)
Parameter P2
Indicator 3 on (flashing)
Indicator 3 on (steady)
Parameter P3
Indicator 4 on (flashing)
Indicator 4 on (steady)
Parameters P0 to P3
Not used
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
Description
The TELEFAST® SB2 AS-i intelligent interfaces are based upon the TELEFAST 2 concept. They allow
standard discrete sensor and actuator devices to be connected to the AS-i bus. They are available in 4
or 8 I/O versions. Their inputs, depending upon the model, may be isolated from the AS-i bus. Their
outputs (either solid state or electromechanical relay) may be used to control actuators of 1 to 5 A.
Composition of the TELEFAST SB2 intelligent interfaces
All the TELEFAST SB2 interfaces share certain common functions and
features, as shown below:
8
1
Q4
108
Q1
1
101
201
2
3
4
5
301
4
104
204
105
205
9
206
7
6
1.
2.
3.
4.
5.
Module address connector
"Normal"/"Addressing" mode selector switch
LED (green) indicating correct connection to AS-i bus
LED (red) indicating an I/O fault
LED (green) indicating presence of external power supply (only on
ABE8S22SBB• and ABE8S44SBB•)
6.
Removable screw terminals for I/O connection and external power
supply, if required
7.
Channel marking label
8.
LED showing I/O status
9.
Removable screw terminal block for connection to the AS-i bus
10. Add-on terminal blocks (ABE7BV10 and ABE7BV20) for additional
common
10
Configurations
Eight versions of TELEFAST SB2 intelligent interfaces are available as follows:
•
•
8-channel interfaces
Four versions available, incorporating 4 inputs and 4 outputs.
ABE8S44SBB0
— The inputs, isolated from the AS-i bus, are powered by an external 24 Vdc supply. They are protected by a current
limiter.
— The solid state outputs, isolated from the AS-i bus, are powered by an external 24 Vdc supply.
ABE8S44SBB1
— The inputs are powered from the AS-i bus and protected by a current limiter.
— The solid state outputs, isolated from the AS-i bus, are powered by an external 24 Vdc supply.
ABE8R44SB11
— The inputs are powered from the AS-i bus and protected by a current limiter.
— The electromechanical relay outputs with 1 N/O contact, isolated from the AS-i bus, are powered by an external
5 to 125 Vdc or 5 to 250 Vac supply.
ABE8R44SF10
— The inputs, isolated from the AS-i bus, are powered by an external 110 Vac supply.
— The electromechanical relay outputs with 1 N/O contact, isolated from the AS-i bus, are powered by an external
5 to 125 Vdc or 5 to 250 Vac supply.
4-channel interfaces
Four versions are available, incorporating 4 inputs, 4 outputs or 2 inputs/2 outputs.
ABE8S40SB00
— Interface with 4 inputs powered by the AS-i bus and protected by a current limiter.
ABE8R04S010
— Interface with 4 electromechanical relay outputs with 1 N/O contact, isolated from the AS-i bus, and powered by
an external 5 to 125 Vdc or 5 to 250 Vac supply.
ABE8S22SBB1
Interface with 2 inputs and 2 outputs.
— The inputs are powered from the AS-i bus and protected by a current limiter.
— The solid state outputs, isolated from the AS-i bus, are powered by an external 24 Vdc supply.
ABE8S22SBB2
Interface with 2 inputs and 2 outputs.
— The inputs are powered from the AS-i bus and protected by a current limiter.
— The solid state outputs, isolated from the AS-i bus, are powered by an external 24 Vdc supply.
NOTE: The outputs have an inverse operation:
- state 0 when they are controlled
- state 1 when deactivated
In the case of a bus failure, the default position is state 1.
03/00
© 2000 Schneider Electric All Rights Reserved
35
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
201
301
204
105
205
206
No.
of
Channels
Function
Input
4
Output
Input
4
–
Bus
–
–
4 relays
1 N.O.
–
125 Vdc/
250 Vac
2 solid
state
2
ABE8S40SB00
8
4 solid
state
4
4 relays
1 N.O.
Q4
Q1
1
4
104
4
108
105
206
201
204
Voltage
205
301
ABE8R44S••
24 Vdc
ext.
Bus
Output/
Channel
Current
Common for 4
channels or volt-free
Output
–
Output
Default
Position
Catalog Number
–
–
ABE8S40SB00
5A
State 0
ABE8R04S010
State 0
ABE8S22SBB1
24 Vdc
Common for 2
channels
2A
State 1
ABE8S22SBB2 ▲
24 Vdc
Common for 4
channels
1A■
State 0
ABE8S44SBB0
24 Vdc
Common for 4
channels
Bus
125 Vdc/
250 Vac
Common for
4 channels
or volt-free
110 Vac
ext.
125 Vdc/
250 Vac
Common for 4
channels
or volt-free
1A■
State 0
ABE8S44SBB1
5A
State 0
ABE8R44SB11
5A
State 0
ABE8R44SF10
Sold in
Lots of
Description
Specifications
Kit for mounting on solid plate
–
10
ABE7ACC01
10 shunted terminals
5
ABE7BV10
20 shunted terminals
5
ABE7BV20
For 6 characters
50
AR1SB3
4A
10
ABE7FU400
6.3 A
10
ABE7FU630
Additional snap-on terminal blocks
Adhesive label holder
Quick-blow fuses (HRC) 5 x 20, 250 V, UL ●
AR1SB3
Bus
Polarity
Distribution/
Operative Part
Catalog Number
Dimensions
2.44
62
0.59
15 0.35
ABE8R44S•••
3.03
77
1.38
35 2.44
62
ABE8S4•••••
ABE8S2•••••
ABE8R04••••
3.54
90
3.03
77
Q4
108
Q1
4
104
1
101
5.12
130
9
Dual Dimensions:
■
●
▲
36
Derate outputs to 0.75 A for 4 simultaneous outputs
HRC: High Rupturing Capacity
The outputs have an inverse operation: state 0 when they are controlled and state 1 when deactivated
© 2000 Schneider Electric All Rights Reserved
03/00
inches
mm
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
General System Environment
Product Certifications
AS-i
Enclosure Rating
Conforming to IEC 529
IP 2X
Shock Resistance
Conforming to IEC 68-2-27
11 ms (semi-sinusoidal)
15 g (acceleration)
5 to 13.2 Hz ± 1 mm
13.2 to 100 Hz- 0.7 gn
Vibration Resistance
Resistance to Electrostatic Discharges
Conforming to IEC 1000-4-2
Level 3
Resistance to Radiated Fields
Conforming to IEC 1000-4-3
Level 3
Resistance to Transients
Conforming to IEC 1000-4-4
Level 3
Surge Withstand
Conforming to IEC 1000-4-5
1 kV at 2 Ohms (differential mode), 2 kV at 12 Ohms (common mode)
Operation, conforming to IEC 1131-2
-23 °F to +140 °F (-5 °C to +60 °C)
Storage, conforming to IEC 1131-2
-40 °F to +176 °F (-40 °C to +80 °C)
Ambient Air Temperature
Insulation Voltage (for 1 minute)
Terminals/fixing rails
2 kV
Installation Category
Conforming to IEC 664
II
Degree of Pollution
Conforming to IEC 664
2
Mounting
Standard profiles
On backplate: 15 mm DIN rail or using ABEACC01
On chassis: 15 mm and 7.5 mm DIN rails
Suitable Cable Sections
Tightening Torque
1 conductor
2 conductors
Flexible cable without cable end
0.14 to 2.5 mm2
26 to 14 AWG
–
–
Flexible cable with cable end
0.14 to 1.5 mm2
26 to 16 AWG
0.14 to 0.75 mm2
26 to 18 AWG
Solid cable
0.14 to 2.5 mm2
26 to 14 AWG
0.14 to 1.5 mm2
26 to 16 AWG
With 3.5 mm screwdriver
5.3 lb-in (0.6 N•m)
5.3 lb-in (0.6 N•m)
Electrical Durability (in millions of operating cycles, according to IEC 947-5-1)
Electrical durability of electromechanical relays on the ABE8R44SB1, ABE8R44SF10, and ABE8R04S010 interfaces
DC12 curves (1)
DC13 curves (2)
3.0
2.5
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
48V
2.0
24V
1.5
1.0
0.5
0.0
0
0.5
1
1.5
L/R = 60ms 24V
0.1
2
AC12 curves (3)
L/R = 10ms 24V
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
AC14 curves (4)
AC15 curves (5)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
2.5
3.0
2.5
24V
2.0
110V
2.0
48V
220V
1.5
110V
1.5
220V
1.0
48V
1.0
24V
0.5
0.5
0.0
0.0
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2
110V
220V
0.5
0.7
0.9
1.1
1.3
1.5
1.7
1.9
(1) DC12: control of resistive loads and solid state loads optically isolated, I/R ≤ 1 ms.
(2) DC13: control of electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operating voltage, Ie: rated operating current (with protective diode across load, DC12 curves
must be used with a coefficient of 0.9 applied to the number in millions of operating cycles).
(3) AC12: control of resistive loads and solid state loads optically isolated, power factor (pf) ≥ 0.9.
(4) AC14: control of small electromagnetic loads from electromagnets ≤72 VA, make: pf = 0.3, break: pf = 0.3.
(5) AC15: control of electromagnetic loads from electromagnets > 72 VA, make: pf = 0.7, break: pf = 0.4.
03/00
© 2000 Schneider Electric All Rights Reserved
37
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
4-Channel Modules
Type of Interface
ABE8S40SB00
ABE8R04S010
ABE8S22SBB1
Function
4 inputs
4 outputs
2 inputs/2 solid state outputs
AS-i Certification
No. 113
No. 112
No. 23601
Supply voltage
From the bus
–
From the bus
Supply current limit
200 mA
–
200 mA
Current consumption per channel, at Un
10 mA
–
10 mA
Guaranteed state 1 U > / I >
11 V/6 mA
–
11 V/6 mA
ABE8S22SBB2
Specifications at 140 °F (60 °C)
Inputs (sensor side)
Guaranteed state 0 U < / I <
5 V/2 mA
–
5 V/2 mA
Conforming to IEC 1131-2
Type 2
–
Type 2
Supply voltage conforming to IEC 947-5-1
–
Ext.: 5 to 125 Vdc
Ext.: 5 to 250 Vac
Ext.: 19.2 to 30 Vdc
Maximum volt drop at In
–
–
0.5 V
Thermal rating per channel
–
5A
1.4 A
Thermal rating for the common return
–
6A
3A
Rated operating current ▲
conforming to IEC 947-5-1
–
AC12: 5 A
AC15: 1.5 A
DC12: 1.4 A
DC13: 1 A
Mechanical life
(in millions of operating cycles)
–
20
–
Minimum operating current
–
10 mA (at 5 V)
2 mA
Maximum leakage current
–
–
0.3 mA
Overload protection
–
–
Electronic
Overcurrent trip level
–
–
2 Types
Low level contact switching reliability (17 V/5 mA).
Faults per 100 million operations
–
1
–
"No-load"
< 35 mA
< 25 mA
< 35 mA
With all the channels "On"
< 250 mA
< 100 mA
< 250 mA
Internal Fuse Protection
–
6.3 A "quick-blow" THPC 4 A "quick-blow" FPC
Maximum Switching
Frequency
100 Hz
10 Hz "no-load"
0.5 Hz at Ie
100 Hz at input < 0.5 Hz/li2 at output
–
Outputs (actuator side)
Other Specifications
Current Consumption
from the Bus
Maximum Insulation
Voltage
Maximum Impulse
Resistance
Conforming to IEC 947-1
Inputs/bus
–
–
Outputs/bus
–
300 V
300 V
–
2.5 kV
2.5 kV at output
1.2/50
UL Listed E164866 CCN NRAQ
CSA Certified LR89150 (164581-2500005985) Class 3211 07
Compliance Standards
Indicators ●
Bus operational
Green LED
Fault
Red LED
External supply healthy
AS-i Profile
Data Bits ◆
–
–
S0.0
S8.0
Bit value
=0
D0
Input 1
0
D1
0
P0 to P3
Not used
Output Default States
Watchdog checks status of bus
–
38
S3.0
=1
0
1
0
1
0
1
0
State 0
0
0
1
0
1
0
=1
0
1
Input 2
1
0
1
Output 1
1
Output 2
1
=0
Input 1
Output 1
Output 4
1
S3.F
=1
Input 2
Output 3
1
=0
Input 1
Output 2
Input 4
Parameter Bits
▲
●
◆
1
Input 3
0
D3
=0
Output 1
Input 2
0
D2
=1
Green LED
1
0
Output 2
1
1
0
8S22SBB1: state 0
8S22SBB2: state 1
See curves on page 37.
Detailed operating descriptions are given in each installation guide.
State of Di bit: state of corresponding input or output. Except for ABE8S22SBB2 where the state of the outputs is the inverse of bits D2 and D3.
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
8-Channel Modules
Type of Interface
ABE8S44SBB0
ABE8S44SBB1
ABE8R44SB11
ABE8R44SF10
Function
4 inputs/4 solid
state outputs
4 inputs/4 solid
state outputs
4 inputs/4 EM
relay outputs
4 inputs/4 EM
relay outputs
AS-i Certification
No. 114
No. 179
No. 23501
No. 23401
Supply voltage
Ext.: 19.2 to 30 Vdc
From the bus
From the bus
Ext.: 110 Vac
Supply current limit
250 mA
200 mA
150 mA
–
Current consumption per channel, at Un
13 mA
10 mA
10 mA
17 mA
Guaranteed state 1 U > / I >
11 V/6 mA
74 V/10 mA
Guaranteed state 0 U < / I <
5 V/2 mA
20 V/4 mA
Conformity to IEC 1131-2
Type 2
Supply voltage
conforming to IEC 947-5-1
Ext.: 19.2 to 30 Vdc
Maximum volt drop at In
0.5 V
Thermal rating per channel
0.7 A
Thermal rating for the common return
2.8 A
Rated operating current
conforming to IEC 947-5-1
DC12: 0.7 A
DC13: 0.5 A
AC12: 5 A
AC15: 1.5 A
Mechanical life
(in millions of operating cycles)
–
20
Minimum current
1 mA
10 mA (at 5 V)
Maximum leakage current
0.2 mA
–
Overload protection
Electronic
–
Overcurrent trip level
1 Type
–
Low level contact switching reliability
(17 V/5 mA). Faults per 100 million operations
–
1
Current Consumption
from the Bus
Internal Fuse Protection
Maximum Switching
Frequency
Maximum Insulation
Voltage
Maximum Impulse
Resistance
Compliance Standards
"No-load"
With all the channels "On"
< 25 mA
< 35 mA
Indicators ▲
Bus operational
Fault
External supply healthy
Specifications at 140 °F (60 °C)
Inputs (sensor side)
Outputs (actuator side)
Ext.: 19.2 to
30 Vdc
Ext.: 5 to 125 Vdc
Ext.: 5 to 250 Vac
–
5A
2A
6A
Other Specifications
Conforming to IEC 947-1
Inputs/bus
Outputs/bus
1.2/50
< 25 mA
< 100 mA
4 A "quick-blow" FPC
6.3 A "quick-blow" THPC –
100 Hz at input, < 0.5 Hz/li2 at output
10 Hz "no-load", 0.5 Hz at Ie
300 V
300 V
–
300 V
–
300 V
300 V
300 V
2.5 kV
Green LED
Red LED
Green LED
S7.0
Bit value
D0
P0 to P3
=0
Input 1
0
Output 1
0
Input 2
0
Output 2
0
Input 3
0
Output 3
0
Input 4
0
Output 4
0
Not used
Watchdog checks status of bus
State 0
D1
D2
D3
▲
●
< 35 mA
< 300 mA
UL Listed E164866 CCN NRAQ
CSA Certified LR89150 (164581-2500005985) Class 3211 07
AS-i Profile
Data Bits ●
Parameter Bit
Output Default States
< 35 mA
< 250 mA
–
=1
1
1
1
1
1
1
1
1
=0
Input 1
0
Output 1
0
Input 2
0
Output 2
0
Input 3
0
Output 3
0
Input 4
0
Output 4
0
=1
1
1
1
1
1
1
1
1
=0
Input 1
0
Output 1
0
Input 2
0
Output 2
0
Input 3
0
Output 3
0
Input 4
0
Output 4
0
=1
1
1
1
1
1
1
1
1
=0
Input 1
0
Output 1
0
Input 2
0
Output 2
0
Input 3
0
Output 3
0
Input 4
0
Output 4
0
=1
1
1
1
1
1
1
1
1
Detailed operating descriptions are given in each installation guide.
State of Di bit: state of corresponding input or output. Except for ABE8S22SBB2, where the state of the outputs is the inverse of bits D2 and D3.
03/00
© 2000 Schneider Electric All Rights Reserved
39
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
ABE8S40SB00
ABE8R04S010
Bus
+
–
+/
114
104
214
113
204
103
213
(3)
–/
u1 u2
–/
+/
Channel 1
ABE8S44SBB0
Q4
u1
(2)
Channel 2
112
102
Q3
202
101
211
4
201
3
2
1
114
104
214
113
204
103
+/
–
+
Channel 1
I4
213
112
203
102
I3
212
202
211
201
7
111
I2
101
I1
Q2
111
Q1
–/
203
+ –
–
+
(1)
212
Bus
Channel 2
ABE8S44SBB1
Bus
a
24 V
(2)
Q4
108
Q1
208
204
104
I4
205
101
4
201
7
+
ABE-7BV10
–
105
I1
2
1
108
107
–
–
(1)
Q4
207
106
Q3
206
205
204
Q2
105
Q1
+
208
I4
104
I3
102
101
I2
202
201
4
3
7
2
1
I1
103
(1)
+
–
+
–
+
+
203
+ –
3
Bus
a 24 V
(2)
–
4 inputs
4 outputs
4 inputs
ABE8S22SBB
Bus
Bus
+
+ –
–
+
–/
+/
2 inputs
u1
I1
I2
I3
I4
(2)
–/
u1
+/
2 outputs
u2
110 V
4 outputs
4 inputs
ABE8R44SB11
Bus
+
+
–
–
+
(1)
Q1
Q4
–
I1
I2
I3
I4
–/
u1
u2
108
208
107
207
106
206
105
205
4
3
104
214
101
114
204
(3)
+
–/
+/
211
111
201
2
1
–/
(2) (2)
u1
+/
4 outputs
4 inputs
(1) Current limiter (see specifications on pages 38 and 39).
(2) On inductive load where the energy is greater than the specified value
(3) Jumpers supplied with the product
40
© 2000 Schneider Electric All Rights Reserved
03/00
218
208
217
(3)
4
3
104
114
(2)
(2)
(2)
204
214
101
111
201
2
211
1
114
104
204
214
213
113
N
Q4
207
Q1
Q2
103
112
203
102
212
202
111
101
211
201
4
7
3
2
1
Q1
216
–
–
(1)
206
I2
215
I1
+
205
–
+
4 outputs
ABE8R44SF10
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
Using TELEFAST® SB2 Intelligent Interfaces with Motor Starters
Recommended Wiring Diagrams
AS-i –
AS-i –
AS-i +
AS-i +
+
–
Ι+
Ι–
I2
I1
I3
I4
O2
O1
O3
O4
108
208
107
207
106
206
105
205
104
204
103
203
102
202
101
201
4
3
7
2
5
ABE8S44SBB1
6
1
24 V
– AU
– KM1
0V
– KM3
– KM4
– Q1
– Q2
– Q3
– Q2
– Q3
– KM2
– Q4
5/L3
– KM4
3/L2
– KM3
– Q4
2/T1
4/T2
6/T3
2/T1
4/T2
6/T3
2/T1
4/T2
6/T3
2/T1
4/T2
6/T3
W
U
V
W
U
V
W
U
V
W
– KM4
V
– KM3
U
– KM1
3/L2
1/L1
5/L3
3/L2
1/L1
5/L3
3/L2
– Q1
– KM2
1/L1
– KM1
0V
5/L3
safety interlock
1/L1
+ 24 V
– KM2
+ 24 V
M2
M1
M3
M4
Data Exchange Specifications
AS-i Profile
Data Bits (Commands)
Data Bits (Status)
03/00
7.0
Bit value
=0
=1
Command D0 (O)
De-energize contactor 1
energize contactor 1
Command D1 (O)
De-energize contactor 2
energize contactor 2
Command D2 (O)
De-energize contactor 3
energize contactor 3
Command D3 (O)
De-energize contactor 4
energize contactor 4
Bit value
=0
=1
State D0 (I)
Contactor 1 energized
Contactor 1 de-energized
State D1 (I)
Contactor 2 energized
Contactor 2 de-energized
State D2 (I)
Contactor 3 energized
Contactor 3 de-energized
State D3 (I)
Contactor 4 energized
Contactor 4 de-energized
© 2000 Schneider Electric All Rights Reserved
41
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
Using TELEFAST® SB2 Intelligent Interfaces with Reversing Motor Starters
Recommended Wiring Diagrams
AS-i –
AS-i –
AS-i +
AS-i +
+
–
Ι+
Ι–
I2
I1
I3
I4
O2
O1
O3
O4
108
208
107
207
106
206
105
104
205
204
103
203
102
202
101
201
4
7
3
2
5
ABE8S44SBB1
6
1
24 V
–Q
–AU
– KM1
0V
– KM2
– KM2
– KM1
+ 24 V
– KM1
0V
– KM2
5/L3
3/L2
safety interlock
1/L1
+ 24 V
–Q
6/T3
4/T2
V
W
2/T1
– KM2
U
– KM1
M
Data Exchange Specifications
AS-i Profile
Data Bits (Commands)
7.0
Bit value
=0
=1
Command D0 (O)
Stop forward running
Start forward running
Command D1 (O)
Stop reverse running
Start reverse running
Command D2 (O)
Command D3 (O)
Data Bits (Status)
Bit value
=0
=1
State D0 (I)
Forward running
Stopped forward running
State D1 (I)
Reverse running
Stopped reverse running
State D2 (I)
State D3 (I)
42
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
TELEFAST SB2 Intelligent Interfaces
Using TELEFAST® SB2 Intelligent Interfaces with Motor Starters
Associated Components
Standard Motor Starters
Rated Operational Power for
Utilization Category AC-3
400/415 Vac
kW
◆
220/230 Vac
kW
DOL Non-reversing Starters
Disconnect/
Protector
Catalog No.
Add-on
Auxiliary
Block
Catalog No.
Contactors
KM1 to KM4
Catalog No.
Reversing Starters
Disconnect/
Protector
Catalog No.
Add-on
Auxiliary
Block
Catalog No.
Reversing
Contactors
KM1 & KM2
Catalog No.
Add-on
Auxiliary
Block
Contactor
Consumption
at 24 Vdc
Catalog No.
mA
0.06
–
GV2M02
GV2AE20
LP1K0601BD
GV2M02
GV2AE20
LP2K0601BD
LA1KN11
125
0.09
0.06
GV2M03
GV2AE20
LP1K0601BD
GV2M03
GV2AE20
LP2K0601BD
LA1KN11
125
0.12/0.18
–
GV2M04
GV2AE20
LP1K0601BD
GV2M04
GV2AE20
LP2K0601BD
LA1KN11
125
0.25
0.09/0.12
GV2M05
GV2AE20
LP1K0601BD
GV2M05
GV2AE20
LP2K0601BD
LA1KN11
125
0.37/0.55
018/0.25
GV2M06
GV2AE20
LP1K0601BD
GV2M06
GV2AE20
LP2K0601BD
LA1KN11
125
0.75
0.37
GV2M07
GV2AE20
LP1K0601BD
GV2M07
GV2AE20
LP2K0601BD
LA1KN11
125
1.1/1.5
0.55/0.75
GV2M08
GV2AE20
LP1K0601BD
GV2M08
GV2AE20
LP2K0601BD
LA1KN11
125
2.2
1.1
GV2M10
GV2AE20
LP1K0601BD
GV2M10
GV2AE20
LP2K0601BD
LA1KN11
125
3/4
1.5
GV2M14
GV2AE20
LP1K0901BD
GV2M14
GV2AE20
LP2K0901BD
LA1KN11
125
5.5
2.2/3
GV2M16
GV2AE20
LP1D1201BD
GV2M16
GV2AE20
LP2D1201BD
LA1DN11
375
7.5
4
GV2M20
GV2AE20
LP1D1801BD
GV2M20
GV2AE20
LP2D1801BD
LA1DN11
375
9
–
GV2M21
GV2AE20
LP1D2501BD
GV2M21
GV2AE20
LP2D2501BD
LA1DN11
460
11
5.5
GV2M22
GV2AE20
LP1D2501BD
GV2M22
GV2AE20
LP2D2501BD
LA1DN11
460
15
7.5/9
GV3M40
GV2AE20
LP1D3201BD
GV3M40
GV2AE20
LP2D3201BD
LA1DN11
460
18.5
–
GV3M40
GV2AE20
LP1D3201BD
GV3M40
GV2AE20
LP2D3201BD
LA1DN11
460
22
11
GV3M63
GV2AE20
LP1D5001BD
–
–
–
–
920 ◆
30
15
GV3M63
GV2AE20
LP1D6501BD
–
–
–
–
920 ◆
37
18.5/22
GV7RE80
GV7AE11
LP1D8001BD
–
–
–
–
920 ◆
Only for ABS8••: 3 contactors can be interfaced with the ASBE8S44SBB1 module (maximum accumulative current for all output channels: 3.15 A)
High-Performance Motor Starters
Rated Operational Power for
Utilization Category AC-3
400/415 Vac
220/230 Vac
Disconnect/
Protector
Add-on
Auxiliary
Block
kW
kW
◆
DOL Non-reversing Starters
Contactors
KM1 to KM4
Reversing Starters
Disconnect/
Protector
Add-on
Auxiliary
Block
Reversing
Contactors
KM1 & KM2
Add-on
Auxiliary
Block
Contactor
Consumption
at 24 Vdc
Catalog No.
Catalog No.
Catalog No.
Catalog No.
Catalog No.
Catalog No.
Catalog No.
mA
0.06
–
GV2P02
GV2AE20
LP1D0901BD
GV2P02
GV2AE20
LP2D0901BD
LA1DN11
375
0.09
0.06
GV2P03
GV2AE20
LP1D0901BD
GV2P03
GV2AE20
LP2D0901BD
LA1DN11
375
0.12/0.18
–
GV2P04
GV2AE20
LP1D0901BD
GV2P04
GV2AE20
LP2D0901BD
LA1DN11
375
0.25
0.09/0.12
GV2P05
GV2AE20
LP1D0901BD
GV2P05
GV2AE20
LP2D0901BD
LA1DN11
375
0.37/0.55
018/0.25
GV2P06
GV2AE20
LP1D0901BD
GV2P06
GV2AE20
LP2D0901BD
LA1DN11
375
0.75
0.37
GV2P07
GV2AE20
LP1D0901BD
GV2P07
GV2AE20
LP2D0901BD
LA1DN11
375
1.1/1.5
0.55/0.75
GV2P08
GV2AE20
LP1D1801BD
GV2P08
GV2AE20
LP2D1801BD
LA1DN11
375
2.2
1.1
GV2P10
GV2AE20
LP1D1801BD
GV2P10
GV2AE20
LP2D1801BD
LA1DN11
375
3/4
1.5
GV2P14
GV2AE20
LP1D1801BD
GV2P14
GV2AE20
LP2D1801BD
LA1DN11
375
5.5
2.2/3
GV2P16
GV2AE20
LP1D2501BD
GV2P16
GV2AE20
LP2D2501BD
LA1DN11
460
7.5
4
GV2P20
GV2AE20
LP1D2501BD
GV2P20
GV2AE20
LP2D2501BD
LA1DN11
460
9
–
GV2P21
GV2AE20
LP1D2501BD
GV2P21
GV2AE20
LP2D2501BD
LA1DN11
460
11
5.5
GV2P22
GV2AE20
LP1D2501BD
GV2P22
GV2AE20
LP2D2501BD
LA1DN11
460
15
7.5/9
GV3M40
GV2AE20
LP1D8001BD
GV3M40
GV2AE20
LP2D8001BD
LA1DN11
920 ◆
18.5
–
GV3M40
GV2AE20
LP1D8001BD
GV3M40
GV2AE20
LP2D8001BD
LA1DN11
920 ◆
22
11
GV3M63
GV2AE20
LP1D8001BD
–
–
–
–
920 ◆
30
15
GV3M63
GV2AE20
LP1D8001BD
–
–
–
–
920 ◆
37
18.5/22
GV7RE80
GV7AE11
LP1D8001BD
–
–
–
–
920 ◆
Only for ABS8••: 3 contactors can be interfaced with the ASBE8S44SBB1 module (maximum accumulative current for all output channels: 3.15 A)
For convenience, the tables above provide references for IEC devices. The same connectivity can be done with NEMA starters and contactors. Consult the
factory for additional information.
03/00
© 2000 Schneider Electric All Rights Reserved
43
AS-i Bus
Intelligent Splitter Modules
Passive
Intelligent
4-way
XZSDP40D1
XZSDP40D1
XZSDP40D1
XZSDA40D3
XZSDA40D3
XZSDA40D3
4 Inputs
2 Inputs/
2 Outputs
XZSDA22D32
XZSDA22D32
+
XZSG10
4 Outputs
XZSDA04D32
XZSDA04D32
+
XZSG10
Connection Bases
XZSDE1113
XZSDE1133
XZSDE2213
XZSDE2323
44
© 2000 Schneider Electric All Rights Reserved
XZSDE2213
XZSDE2323
03/00
AS-i Bus
Intelligent Splitter Modules
4-Port Intelligent Splitter Modules for Connections
to Actuators ■ or Sensors ▲
XZSDA22D32
XZSDA40D3
Description
Sensor Supply
Separate Supply to
the Actuators
Splitter module
2 inputs/
2 solid-state outputs
Via XZSDE••••
connection base,
from the AS-i bus
Via XZSDE••••
connection base
Splitter module
4 inputs
(200 mA max.)
Via XZSDE••••
connection base,
from the AS-i bus
–
Splitter module
4 solid-state outputs
–
Via XZSDE••••
connection base
Catalog Number
XZSDA22D32
XZSDA40D3
XZSDA04D32
8-Port Splitter Modules
Description
XZSDA04D32
Connection
XZSCA44D21
Splitter boxes
4 inputs/
4 solid-state outputs
■
▲
Catalog Number
To the AS-i bus and to the separate
supply by IDC (Insulation Displacement
Connectors) to yellow and black flat
cables
XZSCA44D21
To the AS-i bus and to the separate
supply by 5-pin male M12 connector
XZSCA44D22
Connection to outputs of low power relays, LEDs, valves, etc.
Connection to inputs of digital contacts (push buttons, limit switches) and to solid-state outputs
of 2 or 3-wire type PNP sensors.
XZSCA44D22
Connection Bases
Cable Connection
Type and
Number of Cables
By IDC
2 flat cables for AS-i bus
(yellow) or 2 flat cables for
separate supply (black) Ie
≤2A
XZSDE1113
By IDC
2 flat cables:
- 1 for AS-i bus (yellow)
- 1 for separate supply
(black) Ie ≤ 2 A
XZSDE1133
Unshielded
XZSDE2213
Shielded
XZSDE2323
Description
Cable Type Suitable for
Connection to Equipped Base
Catalog Number
Adaptor for provision of separate supply
from the XZSDE2••• connection base
4-core cable
(2 for the AS-i bus, 2 for the separate
supply)
XZSG10
Description
Connection bases for flat
cable
XZSDE11•3
XZSDE2213
Connection base for
round cable ●
To screw terminals
Maximum clamping
capacity: 2 x 16 AWG
(2 x 1.5 mm2)
Catalog Number
Accessories for Connection Bases
Cover for connection base
XZSDP
XZSDP
XZSG10
Accessory for Splitter Modules
Description
Blanking plug
for M12 connector
Degree of protection IP 67
●
XZLG102
03/00
Catalog Number
XZLG102
Two PG 11 cable glands (clamping capacity Ø6 to 10 mm) and 3 blanking plugs included with
connection base. For twin-conductor cable for AS-i bus Ie ≤ 4 A.
© 2000 Schneider Electric All Rights Reserved
45
AS-i Bus
Intelligent Splitter Modules
Specifications
2 inputs/2 outputs
4 inputs/4 outputs
4 inputs/4 outputs
XZSDA22D32
XZSCA44D21
XZSCA44D22
Product certifications
AS-i No. 10201
AS-i No. 26201
Ambient Air Temperature
Operation: -13 °F to +158 °F (-25 °C to +70 °C)
Storage: -40 °F to +185 °F (-40 °C to +85 °C)
Degree of Protection
IP 67
Type
Environment
Materials
Connection
AS-i No. 26201
PA6-GF-FR
From the bus
By connection base XZSDE••••
To the actuators
or PNP sensors
By female, 4-pin, M12 connector
By insulation displacement connector
By male, 5-pin, M12 connector
Electrical Specifications
Module
From the AS-i bus
Sensors
18 to 30 Vdc ■
Actuators
From separate 24 Vdc supply, -10% to
+15%
From separate 24 Vdc supply, -10% to +15% (with protection against reverse
polarity)
Via connection base
Via AS-i black flat cable
≤ 200 mA
≤ 250 mA (output “On”)
Maximum current for
the 2 or 4 sensors
90 mA
200 mA
Input current - high
≥ 5 mA
Power Supply
Current Consumption
from the Bus
PNP Inputs
Outputs
Indicators
Input current - low
≤ 1.5 mA
Input voltage - high
> 10 Vdc
Input voltage - low
< 5 Vdc
Type
Solid state 24 Vdc
From the AS-i bus (protected against reverse polarity)
Via connector
Watchdog
Default to state O (off) in the event of a communications failure
Maximum current
2A▲
DC12: 1.4 A; DC13: 2 A
Short-circuit protection
Yes
Yes plus protection against inductive over voltages
Green LED
Supply
Supply plus verification of bus operation
Yellow LEDs
Inputs/outputs
Data Exchange Specifications
AS-i Profile
Data Bits
Status (I)
and
Commands (O)
S3.0
Bit value
D0
D1
=1
Absent
Present
(I): Sensor 2 signal
Absent
D2
On
(O): Output 4
Off
Parameter Bits
■
▲
46
P0 to P3
Present
(O): Output 3
Off
D3
S7.0
=0
(I): Sensor 1 signal
On
=0
(I): Sensor 1 signal
Absent
(O): Output 1
Off
(I): Sensor 2 signal
Absent
(O): Output 2
Off
(I): Sensor 3 signal
Absent
(O): Output 3
Off
(I): Sensor 4 signal
Absent
(O): Output 4
Off
=1
Present
On
Present
On
Present
On
Present
On
=0
(I): Sensor 1 signal
Absent
(O): Output 1
Off
(I): Sensor 2 signal
Absent
(O): Output 2
Off
(I): Sensor 3 signal
Absent
(O): Output 3
Off
(I): Sensor 4 signal
Absent
(O): Output 4
Off
=1
Present
On
Present
On
Present
On
Present
On
Not used
The power supplied to the module from the AS-i bus is short-circuit protected (maximum current: 100 mA).
Total permissible current for the module: 2 A max.
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Intelligent Splitter Modules
4 inputs
4 outputs
XZSDA40D3
XZSDA04D32
Product Certifications
AS-i No. 03602
AS-i No. 10301
Ambient Air Temperature
Operation: -13 °F to +158 °F (-25 °C to +70 °C)
Storage: -40 °F to +185 °F (-40 °C to +85 °C)
Degree of Protection
IP 67
Type
Environment
Materials
Connection
PA6-GF-FR
From the bus
By connection base XZSDE••••
To the actuators
or PNP sensors
By female, 4-pin, M12 connector
Electrical Specifications
Power Supply
Module
From the AS-i bus
Sensors
18 to 30 Vdc ■
-
-
From separate 24 Vdc supply, -10% to +15%
-
Via connection base
≤ 300 mA
≤ 50 mA
Actuators
Current Consumption
from the Bus
PNP Inputs
Outputs
Indicators
Maximum current for
the 2 or 4 sensors
200 mA
Input current - high
≥ 5 mA
-
Input current - low
≤ 1.5 mA
-
Input voltage - high
> 10 Vdc
-
Input voltage - low
< 5 Vdc
-
Type
-
Solid state 24 Vdc
Watchdog
-
Default to state O (off) in the event of a communications failure
Maximum current
-
2A▲
Short-circuit protection
-
Yes
Green LED
Supply
Yellow LEDs
Inputs/outputs
-
Data Exchange Specifications
AS-i Profile
Data Bits
Status (I)
and
Commands (O)
S0.0
Bit value
D0
D1
D2
D3
Parameter Bits
■
▲
P0 to P3
=0
(I): Sensor 1 signal
Absent
(I): Sensor 2signal
Absent
(I): Sensor 3 signal
Absent
(I): Sensor 4 signal
Absent
=1
Present
Present
Present
Present
=0
(O): Output 1
Off
(O): Output 2
Off
(O): Output 3
Off
(O): Output 4
Off
=1
On
On
On
On
Not used
The power supplied to the module from the AS-i bus is short-circuit protected (maximum current: 100 mA).
Total permissible current for the module: 2 A max.
03/00
© 2000 Schneider Electric All Rights Reserved
47
AS-i Bus
Cabling and Connection Accessories
Passive Splitter Modules for Connections to AS-i Sensors or Actuators
Description
Catalog Number
Splitter module, 4-way
(2 A max. per way)
XZSDP40D1
XZSDP40D1
Accessories for Connection of AS-i Flat Cable
Tap-Offs
Connection to flat cables by IDC (Insulation Displacement Connector).
Ue - 40 V, Ie - 2 A.
Degree of protection IP 40.
Ambient air temperature: Operation: -13 °F to +158 °F (-25 °C to +70 °C), Storage: -40 °F to +185 °F (-40 °C to +85 °C)
Description
Connection to AS-i
Sensor or Actuator
Tap-offs for
connection to
a flat cable
for AS-i bus (yellow)
XZCG012
Cable Length
Mounting
Catalog Number
By 5-pin female
straight M12
remote connector
Cable: 2 x 24 AWG (2 x 0.34 mm2)
1.97 ft (0.6 m)
Screw
XZCG01205D
3.28 ft (1 m)
Screw
XZCG0121D
By 5-pin female
elbowed M12
remote connector
Cable: 2 x 24 AWG (2 x 0.34 mm2)
1.97 ft (0.6 m)
Screw
XZCG01205C
3.28 ft (1 m)
Screw
XZCG0121C
6.56 ft (2 m)
Screw
XZCG0122
By 5-pin female
straight M12
remote connector
Cable: 4 x 24 AWG (4 x 0.34 mm2)
0.98 ft (0.3 m)
Screw
XZCG01403D
6.56 ft (2 m)
Screw
XZCG0142D
For 5-pin female
elbowed M12
remote connector
Cable: 4 x 24 AWG (4 x 0.34 mm2)
0.98 ft (0.3 m)
Screw
XZCG01403C
6.56 ft (2 m)
Screw
XZCG0142C
6.56 ft (2 m)
Screw
XZCG0142
By cable with bared
ends for terminal block
Cable: 2 x 24 AWG (2 x 0.34 mm2)
Brown wire: AS-i
Blue wire: AS-i
Tap-offs for
connection to
two flat cables:
- 1 for AS-i bus (yellow)
- 1 for the separate
supply (black)
XZCG014
By cable with bared
ends for terminal block
Cable 4 x 24 AWG (4 x 0.34 mm2)
Brown wire: AS-i
Blue wire: AS-i
White wire: 0 V
Black wire: + 24 V
T connectors
Connection to flat cable by IDC
Ue ≤ 40 V, Ie ≤ 2 A.
Degree of protection IP 67.
Ambient air temperature: Operation: -13 °F to +158 °F (-25 °C to +70 °C), Storage: -40 °F to +185 °F (-40 °C to +85 °C)
Description
Connection to AS-i
Sensor or Actuator
T connectors for
connection to a flat cable
for AS-i bus (yellow)
By 5-pin female M12 connector
XZCG0120
Mounting Lugs
Catalog Number
With
XZCG0120
Without
XZCG0220
XZCG0220
48
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Cabling and Connection Accessories
Flat Cables and Accessories
The special profile of these 2-core flat cables eliminates the risk of polarity reversal when connecting.
Connection to the cables are made by IDCs (see connection accessories).
The sheath material self-seals the holes made by the IDC in the event of the connector being removed.
Degree of protection IP 67.
Ambient air temperature:
- standard cable: Operation: -13 °F to +185 °F (-25 °C to +85 °C), Storage: -40 °F to +185 °F (-40 °C to +85 °C).
- TPE (oil and vapor resistant cable): Operation with cable flexing: -22 °F to +221 °F (-30 °C to +105 °C)
Non-flexing operation or storage: -40 °F to +221 °F (-40 °C to +105 °C)
Description
Sheath Color
Length
Type of Cable
Standard
Catalog Number
XZCB10201
65.6 ft (20 m)
TPE
Standard
Yellow (for bus)
XZCB10501
164.0 ft (50 m)
TPE
Standard
XZCB1••0•
XZCB10201H
XZCB10501H
XZCB11001
328.1 ft (100 m)
Flat cable
2 x 16AWG
(2 x 1.5 mm2)
Ue ≤ 48 V
TPE
Standard
XZCB11001H
XZCB10202
65.6 ft (20 m)
TPE
Standard
Black (for separate 24 Vdc supply)
XZCB10202H
XZCB10502
164.0 ft (50 m)
TPE
Standard
XZCB10502H
XZCB11002
328.1 ft (100 m)
TPE
Description
XZCB11002H
Catalog Number
Cable gland protective seal for use with flat cable and No. 11 cable gland (DIN PG11)
XZCE40
XZCE40
03/00
© 2000 Schneider Electric All Rights Reserved
49
AS-i Bus
Cabling and Connection Accessories
Dimensions
Splitter modules XZSDA•••, XZSDP40D1
Connection bases XZSDE11•3
Connection bases XZSDE2•••
0.79
20
3.15
80
0.78
1.22 20
31
1.77 (2)
45 (2)
(3) 4 holes for mounting PG11 cable gland or
blanking plug.
(4) PG11 cable gland.
2.60
66
BU –
0.16
4
3.15
80
0.02
0.5
0.10
2.5
0.14 BN
0.26 3.6
6.5
+
1.22
1.77 31
45
0.5
13
Dual Dimensions:
Splitter boxes
XZSCA44D21
XZSCA44D22
0-2
I-1
0-1
1.06
27
I-2
1.06
27
0-3
0-4
I-3
0-3
I-2
0-2
I-1
0-1
M12x1
2xØ0.18x7
2xØ4.5x7
1.30
33 1.54
0.18
4.5
1.30
33 1.54
0.18
4.5
2xØ0.18x7
2xØ4.5x7
1.06
27
I-3
I-4
Ø0.20
Ø5
2.26
57.5
0-4
36
6.34
161
I-4
Ø0.20
Ø5
2.26
57.5
1.06
27
1.06
27
1.06
27
36
2.36
60 1.42
4.21
107
0.80
20.4
0.98
25
0.71
18
4.21
107
2.36
60 1.42
5.98
152
1.08
27.4
5.98
152
2.59
66
1.38 (1)
35 (1)
Ø0.37
Ø9.5
1.30
33
Cables XZCB•••••
0.39
10
39
39
50
Ø0.21
Ø5.3
Ø0.21
Ø5.3
Ø0.37
Ø9.5
1.22
31
1.77 (1)
45 (2)
(1) Mounting on DIN rail.
(2) When mounting side-by-side, allow 0.04 in
(1 mm) minimum between the modules.
Cover XZSDP
3.15
80
2.60
66
1.38 (1)
35 (1)
3.15
80
0.79
20
1.46
1.77 37
45
1.06
27
(3)
2.34
59.5
Ø0.37
Ø9.5
(4)
0.98
25
M12x1
© 2000 Schneider Electric All Rights Reserved
03/00
inches
mm
AS-i Bus
Cabling and Connection Accessories
Dimensions
T-connectors
XZCG0120
1.97
50
0.59
15
1.2
30.4
0.59
15
1.21
30.7
XZCG0220
1.18
30
0.79
20
0.79
20
(1)
0.39
10
(1)
Dual Dimensions:
XZCG014••
0.71
18
1.87
47.5
0.11
2.7
0.17
4.3
1.54
39
0.17
4.3
0.31
8
0.11
2.7
0.68
17.3
0.59
15
(1)
0.63
16
0.47
12
(1)
0.09
2.3
1.3
33
Connector adjustable to 2 positions through 90°
0.83
21
Tap-Offs
XZCG012••
0.6
15.3
(1)
0.43
10.8
0.01
0.3
(1) Connector adjustable to 2 positions through 90°
0.31
8
1.18
1.57 30
40
0.2
5
inches
mm
Ø0.18
Ø4.5
1.24
1.63 31.5
41.5
Dual Dimensions:
inches
mm
(1) Cable length 1.97 ft (0.6 m), 3.28 ft (1 m), or 6.56 ft (2 m).
Either with stripped ends for terminals (brown: AS-i (+),
blue: AS-i (-)) or fitted with M12 connector.
0.2
5
1.14
29
(1) Cable length 0.98 ft (0.3 m) or 6.56 ft (2 m).
Either with stripped ends for terminals (brown: AS-i (+), blue: AS-i (-),
white: 0 V, black: + 24 V) or fitted with M12 connector
Connections
M12 connectors on intelligent splitter modules
Inputs XZSDA40D•, XZSDA22D••
Digital contact
3-wire sensor
3
–
4
3
2
1
+
–
4
2
Outputs XZSDA04D••
2-wire sensor
1
3
4
–
2
1
+
+
M12 connectors on splitter boxes XZSCA44D2
Inputs
Digital contact
3-wire sensor
–
+
3
4
2
1
Outputs
Connection to bus and
separate supply
2-wire sensor
XZSCA44D22
3
+
–
2
1
+
(1)
2
(1) Ground connected to splitter box assembly screws.
M12 connectors on T connectors XZCG0•20
passive splitter modules XZSDP40D1
and tap-offs XZCG012••
–
3
–
3
2
03/00
1
+
M12 connectors on
tap-offs XZCG014••
AS-i
AS-i
–
4
(1)
–
+
3
4
s
1
4
3
s
2
3
(1)
s
s
(1)
–
4
1
+ AS-i
AS-i
3
–
5
2
1
1
+ AS-i
Connection bases
XZSDE11•3
1
+ AS-i
© 2000 Schneider Electric All Rights Reserved
2
0V
XZSDE2•••
+ AS-i
a + 24 V
4
4
2
0V
a + 24 V
4
Yellow
cable
Yellow
or black
cable
–
AS-i
51
AS-i Bus
Extension Cables
Extension Cables
XZCR••••A•
Connections
4
AS-i Sensors or Actuators
3
1
5
XZCR••••E•
3
4
4
3
4
3
5
2
1
4
3
5
1
52
1
2
3
2
2
1
3
4
5
2
1
XZCR••••C•
3
4
1
2
3
5
XZCR••••D•
5
2
1
4
3
1
2
1
4
1
2
3
4
5
1
2
3
4
5
3
2
1
1
2
3
4
1
2
3
4
3
4
5
5
2
• Proximity sensors XS1
• Photo-electric detectors XUJ
• Control stations XAL
• Proximity sensors XS1
• Photo-electric detectors XUJ
• Control stations XAL
• Proximity sensors XS1
• Photo-electric detectors XUJ
• Control stations XAL
• Proximity sensors XS1
• Photo-electric detectors XUJ
• Control stations XAL
• Enclosed starters LF1, LF2
1
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Extension Cables
Extension Cables
Standard Sensors
4
XZCR••••B•
3
5
2
1
XZCR••••F•
4
3
1
2
1
2
3
5
5
2
Limit switches XCKJ•••D and
XCM (4 or 5-pin)
N.O. contact only.
•
Photo-electric detectors, 3-wire PNP, Osiris design 18, and Osiris
design compact XUL.
Operation: “light on” only.
•
Photo-electric detectors, 3-wire PNP, XUB.
- thru beam and reflex: operation: “light on” only
- diffuse: operation: “dark on” only.
•
Limit switches XS••••••D, type PNP 3-wire.
N.O. output only.
4
•
Photo-electric detectors, 3-wire PNP, XUB.
- thru beam and reflex: operation: “light on” only
- diffuse: operation: “dark on” only.
1
•
Photo-electric detectors, 3-wire PNP, Osiris design compact XUJK.
Operation: “light on” or “dark on”.
•
Limit switches XS••••••D, 3-wire PNP.
N.C. output only.
•
Photo-electric detectors, PNP, Osiris design 8 XUA.
Operation: “light on” or “dark on”.
•
Limit switches XS••••••D, 3-wire PNP.
N.O. or N.C. output.
•
Photo-electric detectors, 3-wire PNP, Osiris design fiber XUD, Osiris
design miniature XUML, and Osiris design forked XUVK.
Operation: “light on” only.
•
Electromechanical pressure or vacuum switches XML.
N.O. contact only.
4
5
3
4
5
4
5
•
1
3
1
2
Limit switches XCKJ•••D and
XCM (4 or 5-pin)
N.C. contact only.
5
5
1
•
4
2
1
3
4
XZCR••••A•
4
3
5
1
3
4
3
4
5
2
1
XZCR••••E•
1
4
3
1
2
3
5
3
1
2
3
5
2
1
XZCR••••G•
2
3
4
5
1
XZCR••••H•
1
2
2
4
3
5
1
2
1
1
3
4
3
4
4
1
3
1
1
3
4
3
4
4
2
1
3
XZCR••••K•
4
3
1
5
1
03/00
2
4
5
1
3
4
3
2
1
4
s
© 2000 Schneider Electric All Rights Reserved
53
AS-i Bus
Extension Cables
Extension Cables with M12 Male/Female for Terminal Connections, 8 mm Diameter Female Connectors
Male Connector Type
M12, 2-pin, straight
M12, 3-pin, straight
Female Connector Type
For terminal connections
Ø 8 mm, 3-pin, straight
Application
See extension cable selection guide according to type of device to be connected to the AS-i bus, pages 52 and 53.
Ø 8 mm, 3-pin, elbowed
Selection
PvR Cable,
Color Black
L = 1.64 ft
(0.5 m)
XZMG11
–
–
L = 3.28 ft
(1 m)
–
XZCR1501040G1
XZCR1502040G1
L = 6.56 ft
(2 m)
–
XZCR1501040G2
XZCR1502040G2
Specifications
Type of Connector
Male: screw threaded. Female: clip ■, ▲
Degree of Protection ▲
IP 67 (male connector)
IP 65
Ambient Air Temperature
+14 °F to +122 °F (-10 °C to +50 °C)
-31 °F to +176 °F (-35 °C to +80 °C)
Conductor Size
2 x 22 AWG (2 x 0.5 mm2)
3 x 24 AWG (3 x 0.34 mm2)
Cable Diameter
0.2 in (5 mm)
0.2 in (5 mm)
Nominal Voltage
12 to 48 Vdc
60 Vac, 75 Vdc
Nominal Current
3A
4A
Contact Resistance
≤ 5 mΩ
≤ 5 mΩ
Clip together, without locking.
Degree of protection when correctly clipped together and with clamping ring correctly tightened, on screw versions.
■
▲
Dimensions
XZCR1501040G•
M12x1
0.24
6
0.63
16
0.43
11
Fitting for
terminal
connection
Dual Dimensions:
M12x1
M12x1
1.02
26
XZCR1502040G•
Ø0.31
Ø8
XZMG11
19.69
500
L
1.63
41.5
1.63
41.5
inches
mm
1.18
30
L
1.63
41.5
L = 3.28 ft (1 m) or 6.56 ft (2 m)
0.79
20
Ø0.31
Ø8
L = 3.28 ft (1 m) or 6.56 ft (2 m)
Connections
XZMG11
XZCR1501040G•, XZCR1502040G•
4
+
4
–
–
+
5
1
1
54
3
3
2
1
1
3
4
3
4
4
3
1
2
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Extension Cables
Extension Cables with M12 Male Connector and M8 Female Connector
Male Connector Type
M12, 3-pin, straight
Female Connector Type
M8, 3-pin, straight
Application
See extension cable selection guide according to type of device to be connected to the AS-i bus, pages 52 and 53.
M12, 4-pin, straight
M8, 3-pin, elbowed
M8, 4-pin, straight
M8, 4-pin, elbowed
Selection
PvR Cable,
Color Black
L = 3.28 ft
(1 m)
XZCR1509040H1
XZCR1510040H1
XZCR1509041J1
XZCR1510041J1
L = 6.56 ft
(2 m)
XZCR1509040H2
XZCR1510040H2
XZCR1509041J2
XZCR1510041J2
Specifications
Type of Connector
Male and female: screw threaded
Degree of Protection ■
IP 67
Ambient Air Temperature
-31 °F to +176 °F (-35 °C to +80 °C)
Conductor Size
3 x 24 AWG (3 x 0.34 mm2)
4 x 24 AWG (4 x 0.34 mm2)
Cable Diameter
0.2 in (5 mm)
0.2 in (5 mm)
Nominal Voltage
60 Vac, 75 Vdc
Nominal Current
4A
Contact Resistance
≤ 5 mΩ
■
Degree of protection when clamping ring correctly tightened.
Dimensions
XZCR1509040H•, XZCR1509041J•
M12x1
XZCR1510040H•, XZCR1510041J•
M12x1
L
Ø0.39
Ø10
1.63
41.5
1.18
30
0.79
20
0.24
6
0.65
16.5
M8x1
L
1.63
41.5
Dual Dimensions:
L = 3.28 ft (1 m) or 6.56 ft (2 m)
inches
mm
Ø0.39
Ø10
M8x1
L = 3.28 ft (1 m) or 6.56 ft (2 m)
Connections
XZCR1509040H•, XZCR1510040H•
3
4
5
1
2
03/00
1
1
3
4
3
4
XZCR1509041J•, XZCR1510041J•
4
2
4
1
1
3
5
3
© 2000 Schneider Electric All Rights Reserved
2
1
2
3
4
1
2
3
4
4
3
2
1
55
AS-i Bus
Extension Cables
Extension Cables with M12 Male Connector and M12 Female Connector
Male Connector Type
M12, 3-pin, straight
Female Connector Type
M12, 3-pin, straight
Application
See extension cable selection guide according to type of device to be connected to the AS-i bus, pages 52 and 53.
M12, 3-pin, elbowed
M12, 3-pin, straight
M12, 3-pin, elbowed
Selection
PvR Cable,
Color Black
L = 3.28 ft
(1 m)
XZCR1511040A1
XZCR1512040A1
XZCR1511040E1
XZCR1512040E1
L = 6.56 ft
(2 m)
XZCR1511040A2
XZCR1512040A2
XZCR1511040E2
XZCR1512040E2
Specifications
Type of Connector
Male and female: screw threaded
Degree of Protection ■
IP 67
Ambient Air Temperature
-31 °F to +176 °F (-35 °C to +80 °C)
Conductor Size
3 x 24 AWG (3 x 0.34 mm2)
Cable Diameter
0.2 in (5 mm)
Nominal Voltage
250 Vac, 300 Vdc
Nominal Current
4A
Contact Resistance
≤ 5 mΩ
■
Degree of protection when clamping ring correctly tightened.
Dimensions
XZCR1511040A•, XZCR1511040E•
XZCR1512040A•, XZCR1512040E•
M12x1
1.63
41.5
L
M12x1
0.31
8
1.02
26
M12x1
1.65
42
Dual Dimensions:
L = 3.28 ft (1 m) or 6.56 ft (2 m)
inches
mm
1.63
41.5
L
M12x1
1.26
32
L = 3.28 ft (1 m) or 6.56 ft (2 m)
Connections
XZCR1511040A•, XZCR1512040A•
XZCR1511040E•. XZCR1512040E•
4
4
3
5
1
56
2
1
1
3
4
3
4
3
3
4
5
5
2
1
2
1
2
3
1
2
3
3
4
5
2
1
1
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Extension Cables
Extension Cables with M12 Male Connector and M12 Female Connector
Male Connector Type
M12, 5-pin, straight
Female Connector Type
M12, 5-pin, straight
Application
See extension cable selection guide according to type of device to be connected to the AS-i bus, pages 52 and 53.
M12, 4-pin, straight
M12, 5-pin, elbowed
M12, 3-pin, straight
M12, 4-pin, straight
M12, 4-pin, elbowed
M12, 3-pin, straight
M12, 3-pin, elbowed
Selection
PvR Cable,
Color Black
L = 3.28 ft
(1 m)
XZCR1511064D1
XZCR1512064D1
XZCR1511041C1
XZCR1512041C1
XZCR1511062B1
XZCR1512062B1
L = 6.56 ft
(2 m)
XZCR1511064D2
XZCR1512064D2
XZCR1511041C2
XZCR1512041C2
XZCR1511062B2
XZCR1512062B2
Specifications
Type of Connector
Male and female: screw threaded
Degree of Protection ■
IP 67
Ambient Air Temperature
-31 °F to +176 °F (-35 °C to +80 °C)
Conductor Size
4 x 24 AWG (4 x 0.34 mm2) +
1 x 22 AWG (1 x 0.5 mm2)
Cable Diameter
0.23 in (5.8 mm)
0.2 in (5 mm)
0.2 in (5 mm)
Nominal Voltage
30 Vac, 36 Vdc
250 Vac, 300 Vdc
30 Vac, 36 Vdc
Nominal Current
4A
Contact Resistance
≤ 5 mΩ
■
4 x 24 AWG (4 x 0.34 mm2)
3 x 22 AWG (3 x 0.5 mm2)
Degree of protection when clamping ring correctly tightened.
Dimensions
XZCR1511064D , XZCR1511041C•, XZCR1511062B•
XZCR1512064D•, XZCR1512041C•, XZCR1512062B•
M12x1
1.63
41.5
M12x1
0.31
8
1.02
26
M12x1
1.65
42
L
1.63
41.5
Dual Dimensions:
L = 3.28 ft (1 m) or 6.56 ft (2 m)
inches
mm
L
M12x1
1.26
32
L = 3.28 ft (1 m) or 6.56 ft (2 m)
Connections
XZCR1511064D•, XZCR1512064D•
4
3
5
1
2
03/00
1
2
3
4
5
1
2
3
4
5
3
XZCR1511041C•, XZCR1512041C•
4
4
2
3
5
5
1
1
2
1
2
3
4
1
2
3
4
3
XZCR1511062B•, XZCR1512062B•
4
4
2
3
1
2
1
2
3
1
© 2000 Schneider Electric All Rights Reserved
1
4
5
5
5
2
5
5
2
1
57
AS-i Bus
Extension Cables
Extension Cables with M12 Male Connector and M12 Female or DIN 43650 A Connectors
Male Connector Type
M12, 3-pin, straight
Female Connector Type
M12, 3-pin, straight
Application
See extension cable selection guide according to type of device to be connected to the AS-i bus, pages 52 and 53.
M12, 3-pin, elbowed
DIN 43650 A, elbowed
Selection
PvR Cable,
Color Black
L = 3.28 ft
(1 m)
XZCR1511062F1
XZCR1512062F1
XZCR1523062K1
L = 6.56 ft
(2 m)
XZCR1511062F2
XZCR1512062F2
XZCR1523062K2
Specifications
Type of Connector
Male and female: screw threaded
Degree of Protection ■
IP 67
Ambient Air Temperature
-31 °F to +176 °F (-35 °C to +80 °C)
Conductor Size
3 x 22 AWG (3 x 0.5 mm2)
Cable Diameter
0.2 in (5 mm)
Nominal Voltage
30 Vac, 36 Vdc
Nominal Current
4A
Contact Resistance
< 5 mΩ
■
Degree of protection when clamping ring correctly tightened.
Dimensions
XZCR1511062F•
XZCR1512062F•
L
M12x1
0.31
8
1.65
42
1.63
41.5
L = 3.28 ft (1 m) or 6.56 ft (2 m)
L
1.26
32
L = 3.28 ft (1 m) or 6.56 ft (2 m)
1.42
36
1.63
41.5
XZCR1523062K•
M12x1
M12x1
1.02
26
M12x1
M12x1
1.63
41.5
2.36
60
L
30
L = 3.28 ft (1 m) or 6.56 ft (2 m)
Dual Dimensions:
inches
mm
Connections
XZCR1511062F•, XZCR1512062F•
XZCR1523062K•
3
4
3
1
2
4
5
5
1
58
3
3
4
5
4
4
1
2
4
5
5
5
2
3
1
1
1
3
4
1
4
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Extension Cables
M12 Male Connectors and Extension Cables, M12 Two-Way Splitter Boxes
Male Connector Type
M12, 4-pin, straight
Application
See extension cable selection guide according to type of device to be connected to the AS-i bus, pages 52 and 53.
M12, 5-pin, straight
Selection
Connection to Cable by
Screw Terminal Connections
PvR Cable,
Color Black
XZCC12MDM40B
XZCC12MCM40B
–
–
L = 1.64 ft
(0.5 m)
–
–
XZCP1564L05
–
L = 3.28 ft
(1 m)
–
–
XZCP1564L1
–
L = 6.56 ft
(2 m)
–
–
XZCP1564L2
–
–
–
–
XZLC1220C1
2-Way Splitter (M12 Female
Connectors, 5 Contacts)
Specifications
Type of Connector
Male: screw threaded, metal clamping ring ■
Male: screw threaded
Male and female:
screw threaded
Degree of Protection ▲
IP 67
IP 67
IP 67
Ambient Air Temperature
-40 °F to +185 °F (-40 °C to +85 °C)
-31 °F to +176 °F (-35 °C to +80 °C)
+5 °F to +194 °F (-15 °C to +90 °C)
Conductor Size
For terminal connections: 4 x 20 AWG (4 x 0.75 mm2), maximum
4 x 24 AWG (4 x 0.34 mm2) +
1 x 22 AWG (1 x 0.5 mm2)
Cable diameter 0.23 in (5.8 mm)
–
Nominal Voltage
125 Vac, 150 Vdc
30 Vac, 36 Vdc
10 to 30 Vdc
Nominal Current
3A
4A
4 A per way: 4 A max
Contact Resistance
≤ 8 mΩ
≤ 5 mΩ
≤ 5 mΩ
■
▲
To order a connector with a plastic clamping ring (entirely plastic encased connector) replace the second letter M in the selected reference with the letter P. For
example: XZCC12MDM40B becomes XZCC12MDP40B.
Degree of protection when clamping ring correctly tightened and cable gland correctly seated.
Dimensions
XZCC12MCM40B
M12x1
1.46
0.81 37
20.5
2.36
60
XZCP1564L•
1.61
41
M12x1
(1)
XZLC1220C1
M12x1
M12X1
L
0.91 0.35
23
9
1.38
35
0.77
19.5
1.63
41.5
L = 3.28 ft (1 m) or 6.56 ft (2 m)
1.06
27
M12X1
0.67
17
(1)
1.57
40
Ø0.79
Ø20
Ø0.78
Ø20
XZCC12MDM40B
1.30
33
Dual Dimensions:
(1) 7 mm plastic cable gland
inches
mm
(1) 7 mm plastic cable gland
Connections
XZCC12M, •M40B
4
3
XZCP1564L•
XZLC1220C1
BU
3
BK
4
4
3
1
2
5
1
BN
5
4
Y/G
2
BK/WH
© 2000 Schneider Electric All Rights Reserved
3
5
1
2
Black
1
03/00
4
3
5
2
1
White
2
59
AS-i Bus
Power Supply Module and Unit
Description
The TSXSUPA02 power supply module and the TSXSUPA05 power supply unit integrate the special filters required to supply an
AS-i bus. These parts ensure the polarization of the AS-i bus as well as the power supply for sensors connected to it (within t he
limits of the available power).
The TSXSUPA05 unit also has a 24 Vdc output designed to supply other items (PLCs, sensors, pre-actuators, etc.) whether or not
they are connected to the AS-i bus.
TSXSUPA02 Power Supply Module
An AS-i lamp (green) indicating that the 30 Vdc supply
is present on the AS-i bus.
Primary voltage selector (110 to 120 Vac and 200 to 240 Vac).
Two screw terminals (AS-i + and AS-i –) for connection
to the AS-i bus, and a ground terminal for connecting
the shielding when a shielded bus cable is used.
Three screw terminals for connection to the network.
TSXSUPA05 Power Supply Module
An ON lamp (orange), supply present.
Two lamps: An AS-i lamp (green), lit when
30 Vdc is present on the AS-i bus, and a 24
V lamp (green), lit when 24 Vdc supply is
present on the auxiliary power supply.
Two terminals for selecting the primary voltage
selector (110 to 120 Vac or 200 to 240 Vac).
Four screw terminals for the 24 Vdc output.
Two screw terminals (AS-i + and AS-i –) for
connection to the AS-i bus, and a ground
terminal for connecting the shielding when
a shielded bus cable is used.
Three screw terminals for connection to
the network.
These two power supplies comply with Micro PLC (TSXSUPA02/SUPA05) and Premium PLC (TSXSUPA05) mounting
requirements which enables them to be mounted independently on rails next to Micro/Premium PLCs or in a Premium PLC rack
(TSXSUPA02 module).
Dimensions
TSXSUPA02 Power Supply Module
TSXSUPA05 Power Supply Unit
60
0.698
17.72
3.54
89.9
5.96
151.5
5.51
140
20
1.57
40
2.89
73.43
0.63
5.31 16
135
© 2000 Schneider Electric All Rights Reserved
0.34
8.75
8.85
224.8
8.16
207.3
1.23
31.3
2.87
73
2.20
56
0.23
5.75
4.73
120.2
2.33
59.2
0.18
4.5
5.91
150
0.16
4
0.34
8.72
5.96
151.5
3.5
1.23
88.9
31.3
0.63
16
Dual Dimensions:
03/00
inches
mm
AS-i Bus
Power Supply Module and Unit
Specifications
Type of Power Supply
Module
TSXSUPA02
Nominal Primary Voltage
100 to 120 Vac
200 to 240 Vac
100 to 120 Vac
200 to 240 Vac
Primary Voltage Range
85 to 132 Vac
170 to 264 Vac
85 to 132 Vac
170 to 264 Vac
Network Limit Frequency
47 to 63
47 to 63
47 to 63
47 to 63
Max. Immunity Time to
Microbreaks
10 ms
10 ms
10 ms
10 ms
Secondary Nominal Voltages 30 V (AS-i bus)
30 V (AS-i bus)
24 V (process)
Voltage Limits
29.5 to 31.6 V
29.5 to 31.6
24 V ± 3%
Output Current
2.4 A at 140 °F (60 °C) (2.8 A peak)
See output current curve at 140 °F (60 °C)
Output Power at Secondary
72 W at 140 °F (60 °C)
See output current curve at 140 °F (60 °C)
TSXSUPA05
Auxiliary Supply Current, A (max)
7
6
5
4
3
2
1
TSXSUPA05
Output Currents ■
5.8
4.5
3
AS-i Bus Current, A (max)
0
1
Rms Insulation Voltage
Between Primary and
Secondary
3500 Vrms
Withstand to Electric Fields
10 V/m
Safety Extra Low Voltage
(SELV)
Yes
2
3
4
5
Interference Withstand Class FCC class A
Conformity to
Standards
PLC
IEC 1131-2
Vibrations
IEC 68-2-6-Fc (2 g)
Shocks
IEC 68-2-27 (15 g, 11 ms)
Storage
-13 °F to +158 °F (-25 °C to +70 °C)
Operation
+14 °F to +140 °F (-10 °C to +60 °C)
IEC 68-2-6-Fc (1 g)
Temperature
Compliance Standards
■
UL Listed E194434 CCN NRAQ
CSA Certified LR58905 Class 2252 01
The TSXSUPA05 is a constant output maximum power. The power which is not used on one output is available on the other
output. Output currents must respect the above curve.
Selection
Current at Secondary Voltages
Description
TSXSUPA02
Catalog Number
30 Vac (AS-i bus)
24 Vdc
Module
100 to 120 Vac and 200 to 240 Vac,
50/60 Hz
2.4 A
–
TSXSUPA02
Unit
100 to 120 Vac and 200 to 240 Vac,
50/60 Hz
5A▲
7A▲
TSXSUPA05
Ground fault detector for AS-i bus
–
–
RM0PAS101
Connection accessories
–
–
See pages 48 and 49.
▲
Constant output maximum power supply unit, see above curve.
TSXSUPA05
03/00
© 2000 Schneider Electric All Rights Reserved
61
AS-i Bus
Insulation Control Relay for AS-i Bus
General
The RM0PAS101 insulation control relay detects and signals any ground fault
on either of the 2 polarities of an AS-i bus cable. It takes into account any
input/output ground faults of PNP intelligent splitter boxes (not isolated from
the bus).
1
Q4
108
Q1
2
3
TEST
RESET
BUS
BUS
201
1
101
301
4
104
204
105
205
5
6
Operating Principle
206
OK
4
+
FAULT
7
FAULT
7
Insulation control relay for AS-i bus:
1.
2.
3.
4.
5.
6.
7.
Connections to the AS-i bus
TEST button
RESET button
Relay state LED indicator
I/O state indicators
Removable power supply terminal
Removable terminals
Used in conjunction with the impedance adaptor LA9RM401 on the supply,
the RM0PAS101 insulation relay also detects faulty ground connections to
the relay itself and/or to the AS-i supply.
The RM0PAS101 insulation control relay is supplied directly from the AS-i
bus. In the event of a fault, 1 of 2 output contacts allows breaking of the
supply to the actuators while the other can be used to signal the fault to a
PLC. In addition, the RM0PAS101 insulation control relay inhibits bus
communication in the event of a fault, in order to activate the watchdog
functions of the connected slaves.
Resetting, after rectification of fault and testing, can be performed by either
using the buttons on the front left-hand side of the relay, or by applying a
+ 24 V signal to the inputs on the terminal block (control by PLC output).
• Operation with no fault present
On power-up of the AS-i bus, the insulation control relay measures the
insulation resistance between each of the AS-i bus polarities (AS-i (+) and
AS-i (–)) and the ground terminal, and compares it to a value on the order
of 40 kΩ. If each resistance is higher than this value, the output relay
energizes and the “OK” LED illuminates.
• Appearance of a fault
Should one or both of the resistances measured (R AS-i (+)/Ground and/or
R AS-i (–)/Ground) fall below approximately 40 kΩ, or in the event of a fault in
the ground connection to the RM0PAS101 insulation control relay:
— The data exchanges on the AS-i bus are inhibited which, in turn,
triggers an alarm at the AS-i bus master within 5 ms.
— The output relay contacts open.
— The polarity on which the fault is detected is signalled by the
illumination of one or two LEDs (FAULT + or/and FAULT –), located on
the front left-hand side of the relay.
• Fault memory
The contacts remain open and the “Fault” LED stays on, even if the fault
disappears, unless the supply to the AS-i (+) and AS-i (–) terminals is
broken. If this occurs, the relay resets itself when the supply is restored,
providing the fault has disappeared, and the output relay contacts reclose.
• Resetting
As soon as the fault is eliminated, the relay must be reset which, in turn,
closes the output relay contacts and extinguishes the associated “Fault”
LED. Two methods of resetting are possible:
— Locally, by pressing the RESET button.
— Remotely, by a change of state of the signal between terminals S1 and
S2 (see function diagram on the next page) lasting more than 30 ms.
This input must be permanently maintained at the high state when not
being used for resetting.
62
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Insulation Control Relay for AS-i Bus
• Test
The relay has a test feature to simulate faults. Each test sequence alternatively simulates an insulation
fault on one of the two AS-i bus polarities. The relay must respond as if the fault was authentic and
following each test, the relay must be reset as detailed above. Each subsequent test sequence checks
the other polarity of the AS-i bus (see function diagram on next page).
Two methods of testing are possible:
• Locally, by pressing the TEST button.
• Remotely, by a change of state of the signal between terminals S3 and S4 lasting more than 30 ms.
Function Diagram
Supply AS-i (+) AS-i (-)
AS-i (+)
AS-i (-)
(1)
(1)
(1)
(1)
Reset S1 S2
Test S3 S4
Output relay
(1)
(1)
(3)
Contacts 15/18
25/28
(2)
(3)
(2)
(3)
(2)
(3)
(2)
LED/OK
FAULT +
FAULT -
Relay off
Relay on
Input at state 0 or contact open
Input at state 1 or contact closed
(1) 30 ms minimum
(2) 15 ms
(3) 20 ms
LED off
LED on
03/00
© 2000 Schneider Electric All Rights Reserved
63
AS-i Bus
Insulation Control Relay for AS-i Bus
Selection
Description
Catalog Number
Insulation control relay for AS-i bus (supplied with an impedance adaptor)
RM0PAS101
Impedance adaptor (replacement part)
LA9RM401
2.99
76
1.38
35 2.28
58
Dimensions
0.59
15
2.28
58 2.64
67
3.54
90
Dual Dimensions:
inches
mm
Recommended Wiring Schematic
To AS-i bus power supply/rest of bus
To AS-i bus master
+
–
+
–
dc
dc
0V
GND
28
15
25
18
S2
S1
S3
S4
X4
X3
X2
X1
R < 3 ohms
0V
Emergency stop
Test
(PLC output)
0V
Remote
reset
Fault
(PLC input)
Reset
(PLC output)
24 Vdc
Supply to actuators
Use an interposing relay if the
current consumption of the
actuators is greater than the
breaking capacity of the internal relay
(DC12: 5A/30V, DC13:1.5A/30V)
The insulation control relay impedance is the same
as that of the network slave.
(1)
For correct operation, fit the impedance adaptor 1
directly on the AS-i bus supply 2, between
terminals AS-i and Shd.
RM0PAS101
2
3
AS-i
(–)
AS-i
(+)
(1) Maximum distance between the insulation
control relay and the AS-i bus master: 6.56 ft (2 m).
Voltage at the RM0PAS101 insulation control relay
must be between 29.5 and 31.6 Vdc.
Shd
1
64
Connections to ground: both the bus power supply
and the RM0PAS101 insulation relay must be
reliably connected to ground (resistance < 3 Ω).
1
2
3
Impedance adaptor LA9RM401
Bus power supply
AS-i bus master
© 2000 Schneider Electric All Rights Reserved
03/00
AS-i Bus
Insulation Control Relay for AS-i Bus
Specifications
Environment
Product Certification
AS-i No. 16701
Conforming to Standards
IEC 204, 1 and 2, EN 60204, 1 and 2
Degree of Protection
Conforming to IEC 529
(against direct contact)
Resistance to Burning (Hot Wire Test)
Conforming to IEC 695-2-1
1382 °F (750 °C): extinction < 30 s
Shock Resistance
Conforming to IEC 68-2-27
11 ms (semi-sinusoidal), 15 gn ■
Vibration Resistance
Conforming to IEC 68-2-6
10 to 150 Hz, 2 gn ■
Resistance to Electrostatic Discharges
Conforming to IEC 1000-4-2
Level 3
Resistance to Radiated Fields
Conforming to IEC 1000-4-3
Level 3
Resistance to Transients
Conforming to IEC 1000-4-4
Level 3
Surge Withstand
Conforming to IEC 1000-4-5
1.2/50–8/20 µs; Level 3
Ambient Air Temperature
Operation
23 °F to 140 °F (-5 °C to +60 °C) ■
Insulation Voltage (for one minute)
Terminals/fixing rail
2 kV
Installation Category
Conforming to IEC 664
II
Degree of Pollution
Conforming to IEC 654
Mounting
Standard profiles
Flexible cable without cable end
Suitable Cable Sections
Flexible cable with cable end
Solid cable
Tightening Torque
With 3.5 mm screwdriver
IP2X
2
On backplate: 15 mm mounting rail or using ABE-ACC01
On chassis: 15 mm or 7.5 mm mounting rail
1 conductor
2 conductors
0.14 to 2.5 mm2
—
26 to 14 AWG
—
0.09 to 1.5 mm2
0.09to 0.75 mm2
28 to 16 AWG
28 to 20 AWG
0.14 to 4 mm2
0.2 to 2.5 mm2
26 to 12 AWG
24 to 14 AWG
5.3 lb-in (0.6 N•m)
Measuring Input Specifications
Operating Range
Average Consumption at 30 V
Response Time
Detection Threshold
29.5 to 31.6 Vdc
From bus
50 mA
Opening of relay contacts
< 20 ms
BUS communication interrupt
< 5 ms
R AS-i (+) Ground
< 10 kΩ
R AS-i (–) Ground
< 10 kΩ
Output Relay Specifications and Operation
Number of Outputs
2 relays, each with 1 N/O contact
Output Relay State
Energized on absence of fault when AS-i + AS-i – supplied
Rated Operating Voltage
Conventional Thermal Current
Rated Operating Current
Operating Status Indication
50 Vdc
For U contact = 24 V DC
5A
DC12
5A
DC13 (U/R =10ms)
2A
FAULT +, upper red LED on
Insulation fault, polarity AS-i +
FAULT –, lower red LED on
Insulation fault, polarity AS-i –
OK, green LED on
Supply to relay on and no fault present
Test, yellow LED on
Test input at state 1
Reset, green LED on
Reset input at state 1
R1 and R2, green LED on
Output relays energized
Test Input and Reset Input Characteristics (supplied from external source, not bus)
Consumption per Channel at Un
Un = 24 Vdc
13 mA
State 1 Guaranteed
U > or I >
11 V/5 mA
State 0 Guaranteed
U < and I <
5 V/2 mA
Conformity
Conforming to IEC 1131-2
Type II
■
Pending validation.
03/00
© 2000 Schneider Electric All Rights Reserved
65
AS-i Bus
Product Index by Description
Description
Catalog
Number
Description
Catalog
Number
12 Button Keypad
XBLC5012••••
20
Jumper Cable
XZCR15•••••••
52-58
XALSZ1
33
2 I+ 2 O Module for Operator Station
Keypads
XBLC5012••••
20
2 Push Buttons Operator Station
XALS20••
18
M12, 5 pin, Straight, Extension Cable
XZCP•••••••
59
8-Port Splitter Box
XZSCA•••••
45
Male Connector Plug
XZCC12M•••••
59
Addressing Terminal
XZMC11US
17
Master for TSX Micro PLC
TSXSAZ10
9
Addressing Terminal Cable
XZMG11
Master for TSX Premium PLC
TSXSAY100
12
Addressing Terminal Cable to Non-Splitter
Devices
XZMG12
Page No.
17, 55
17
Addressing Terminal Cable to Splitter Boxes XZMG13
17
Adhesive Label Holder
AR1SB3
36
Altivar 58 AS-i Card
VW3A58305
31
AS-i User Guide
XD0C5011EN
17
Base for Round Shielded Cable
XZSDE••••
45
Base for Splitter Box
XZSDE••••
45
Blanking Plug
XSZLD102
45
Cable
XZCB•••••
52
Connector Adapter RJ 45/SUB-D 9 Pin Male
XGVSZ0920
Cover for Base
XZSDP
45
Covers
XSZLD102
45
Drives Interface Card
VW3A58305
31
Ground Leakage Relay
RMOPAS101
64
Flat Cable
XZCB•••••
49
I/O Card (4I + 4O)
ZB2BZS••
33
I/O Card for Operator Station
XALSZ1
33
Impedance Adapter
LA9RM401
64
Incandescent Bulb for XVA
DL1B••••
27
Inductive Proximity Sensor
XS1M30AS101
22
Inductive Proximity Sensor
XS7C40AS101
22
Inductive Proximity Sensor
XS8C40AS101
22
Insulation Displacement Connectors (IDCs)
XZCG•••••
48
Insulation Relay
RMOPAS101
64
Intelligent Splitter Box
XZSCA•••••
45
Interface Boards
ZB2BZS••
33
IP 20 Connectors
XZCG•••••
48
66
Page No.
Mini-Style Connector Cable
XZCR15•••••••
52-58
Passive Splitter Box
XZLC1220C1
59
Passive Splitter, 4-Way
XZSDP40D1
48
PG11 Seal for Flat Cable
XZCE40
49
Photoelectric Sensors
XUJK•••••AS
24
Power Supply for AS-i Bus
TSXSUPA••
61
Premium PLC Master
TSXSAY100
12
Push Button Control Station
XALS20••
18
Quick Connector Cable
XZCR15•••••••
Repeater
XZMA1
RJ45/SUB-D 9 Pin Male Connector
XGVSZ0920
Seal for Flat Cable
XZCE40
49
Sensor Concentrator
XZSCA•••••
45
Spider
XALSZ1
33
Splitter Box
XZSCA•••••
45
Splitter Box
XZSDA•••••
45
Splitter Box
XZLC1220C1
59
Splitter Box Base
XZSDE••••
45
Stack Lights
XVA•••••
26
52-58
16
SUB-D 9 Pin Male Connector
XGVSZ0920
Supply Adaptor for Round Cable Base
XZSG10
45
Tap-Offs
XZCG•••••
48
Telefast 2 Accessories
ABE7•••••
36
Telefast 2 for AS-i
ABE8•••••
36
TSX 37 Micro PLC User Manual
TSXDM3713E
User Guide (AS-i Systems)
XD0C5011EN
User Manual for TSX37 Micro
TSXDM3713E
XUJ Sensor Interface
XUJZAS1
© 2000 Schneider Electric All Rights Reserved
17
24
03/00
AS-i Bus
Product Index by Catalog Number
Catalog
Number
Description
ABE7•••••
TELEFAST 2 Accessories
36
ABE8•••••
TELEFAST 2 for AS-i
36
AR1SB3
Adhesive Label Holder
36
DL1B••••
Incandescent Bulb for XVA
27
LA9RM401
Impedance Adapter
64
RMOPAS101
Ground Leakage Relay
64
TSXDM3713E
TSX 37 Micro PLC User Manual
TSXSAY100
Master for TSX Premium PLC
TSXSAZ10
Master for TSX Micro PLC
9
TSXSUPA••
Power Supply for AS-i Bus
61
VW3A58305
Altivar 58 Drive Controller AS-i Card
31
XALS20••
2 Push Buttons Operator Station
18
XALSZ1
2 I+ 2 O Module for Operator Station
33
XBLC5012••••
12 Button Keypad
20
XD0C5011EN
AS-i User Guide
17
XGVSZ0920
Connector Adapter RJ 45/SUB-D 9 Pin Male
XS1M30AS101
Inductive Proximity Sensor
22
XS7C40AS101
Inductive Proximity Sensor
22
XS8C40AS101
Inductive Proximity Sensor
22
XSZLD102
Blanking Plug
45
XUJK•••••AS
Photoelectric Sensors
24
XUJZAS1
XUJ Sensor Interface
24
XVA•••••
Stack Lights
26
XZCB•••••
Flat Cable
49
XZCC12M•••••
Male Connector Plug
59
XZCE40
PG11 Seal for Flat Cable
49
XZCG•••••
Tap-Offs
48
XZCP•••••••
M12, 5 pin, Straight, Extension Cable
XZCR15•••••••
Jumper Cable
XZLC1220C1
Passive Splitter Box
59
XZMA1
Repeater
16
XZMC11US
Addressing Terminal
XZMG11
Addressing Terminal Cable
XZMG12
Addressing Terminal Cable to Non-Splitter
Devices
17
XZMG13
Addressing Terminal Cable to Splitter Boxes
17
XZSCA•••••
Sensor Concentrator
45
XZSDA•••••
Splitter Box
45
XZSDE••••
Splitter Box Base
45
XZSDP
Cover for Base
45
XZSDP40D1
Passive Splitter, 4-Way
48
XZSG10
Supply Adaptor for Round Cable Base
45
ZB2BZS••
I/O Card (4I + 4O)
33
03/00
Page No.
12
59
52-58
17
17, 55
© 2000 Schneider Electric All Rights Reserved
67
Square D Company
8001 Highway 64 East
Knightdale, NC 27545 USA
1-888-SquareD
(1-888-778-2733)
www.squared.com
Schneider Canada Inc.
19 Waterman Avenue,
M4B 1 Y2
Toronto, Ontario
(416) 752-8020
www.schneider.ca
Catalog No. 8340CT0001 March 2000.
D-Fax™ No. 4460, 4461, 4462