Sega BG-SSC-004 Instruction manual

Version 082613
Sonic Kiddie Ride
BG-SSC-004 Kiddie Ride Owners Manual
Assembly operation and care instuctions.
Serial #
Distributed By
Sales Person
Technical Service #
Safety Instructions for use and play.
Once you place the ride in it’s desired location please ensure
that the 4 rubber stopper legs are all the way the floor and the
car is not supported by the wheels.
Risk of Electric Shock
Hazardous voltage which can cause electrical shock
exists inside the equipment. Only qualified personnel
should work inside the equipment.
Playing Warnings
Spectators should not climp on the ride. This may
cause injury.
This game features flashing lights which may not be
suitable for photosensitive epilepsy.
Before using this product
To ensure the safe operation of this product, be sure to read the following before usage.
The following instructions are intended for the users, operators and the personnel in charge
of the operation of the product. After carefully reading and sufficiently understanding the
warning displays and cautions, handle the product appropriately. Be sure to keep this
manual for future reference.
Perform work in accordance with the instructions herein stated. Instructions for work are
explained by paying attention to the aspect of accident prevention. Failing to perform work
as per the instructions can cause accidents. In the case where only those who have technical
expertise should perform the work to avoid hazardous situation, the instructions herein state
that the site maintenance personnel should perform such work.
• Be sure to turn off the power before working on the machine. To prevent an electric shock,
be sure to turn off the power before carrying out any work that requires direct contact with
the interior of the product. If the work is to be performed in the power-on status, the
Instruction Manual herein always states to that effect.
• Be sure to ground the Earth Terminal. (This is not required in the case where a power cord
with earth is used.)
• This product is equipped with the Earth Terminal. When installing the product, connect the
Earth Terminal to the "accurately grounded indoor earth terminal" by using an earth wire.
Unless the product is grounded appropriately, the user can be subject to an electric shock.
After performing repair, etc. for the control equipment, ensure that the Earth Wire is firmly
connected to the control equipment.
• Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This
product does not incorporate the Earth Leakage Breaker. Using a power supply which is not
equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
• Be sure to use fuses which meet the specified rating. (Only for the machines which use
fuses.) Using fuses exceeding the specified rating can cause a fire and an electric shock.
(Only for the machines which use fuses.)Using fuses exceeding the specified rating can
cause a fire and an electric shock.
• Specification changes (removal of equipment, conversion and addition) not designated by
SEGA are not allowed. The parts of the product include warning labels for safety, covers for
personal protection, etc. It is very hazardous to operate the product by removing parts
and/or modifying the circuits. Should doors, lids and protective parts be damaged or lost,
refrain from operating the product, and contact where the product was purchased from or
the office herein stated. SEGA shall not be held responsible for any accidents, compensation
for damage to a third party, resulting from the specifications not designated by SEGA.
1
• Ensure that the product meets the requirements of appropriate electrical specifications.
Before installing the product, check for electrical specifications. SEGA products have a
nameplate on which electrical specifications are described. Ensure that the product is
compatible with the power supply voltage and frequency requirements of the location.
Using any electrical specifications different from the designated specifications can cause a
fire and an electric shock.
• Install and operate the product in places where appropriate lighting is available, allowing
warning labels to be clearly read. To ensure safety for the customers, labels and printed
instructions describing potentially hazardous situations are applied to places where
accidents can be caused. Ensure that where the product is operated has sufficient lighting
allowing the warnings to be read. If any label is peeled off, apply it again immediately.
Please place an order from office herein stated.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE
PRODUCT TO THE LOCATION
Normally, at the time of shipment, SEGA products are in a status allowing for usage
immediately after transporting to the location. Nevertheless, an irregular situation may
occur during transportation. Before turning on the power, check the following points to
ensure that the product has been transported in a satisfactory status.
• Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?
• Are casters and adjusters damaged?
• Do the power supply voltage and frequency requirements meet with those of the location?
• Are all wiring connectors correctly and securely connected? Unless connected in the correc
way, connector connections can not be made accurately. Do not insert connectors forcibly.
• Do power cables have cuts and dents?
• Are all accessories available?
• Can all doors/lids be opened with the accessory keys? Can doors/-lids be firmly closed?
2
Warning Sticker Placement
ATTENTION
PLEASE DO NOT leave children
unattended. Children MUST be
seated and supervised at all
times or injuries may occur.
ATTENTION
Two Riders Only
Two Riders Only
Weight limit 80 KG
Weight limit 80 KG
[40 kg per rider]
ATTENTION
Caution Moving Car Body
PLEASE DO NOT leave children
unattended. Children MUST be
seated and supervised at all
times or injuries may occur.
[40 kg per rider]
ATTENTION
Caution Moving Car Body
ATTENTION
DO NOT CLIMB
FENG YUNG CHENG CO., LTD (FYC)
9F-1, NO.48, TIEN SHUI RD TAIPEI 103, TAIWAN, R.O.C.
MODEL
SONIC CAR
VOLTAGE
AC110/120V
POWER
FREQUENCY
50/60 Hz
DATE
8/XX/2013
FUSE
3.15A
WEIGHT
xxKg
SERIAL NO
BG-SGKDXXXX
SPECIAL
SPEC
.5A [237W]
MADE IN TAIWAN
Technician Access Only
Refer to Manual for Service
ATTENTION
Authorized Service Only
Insert Coin and
Push START to Start Ride
Hold Steering Wheel
3
Sonic Kiddie Ride Detail Manual
1
2
5
6
15
7
3
14
4
13
8
11
12
9
10
Side View
1. Start Button/SFX
2. Steering Wheel
10. Leveler
3. Coin Acceptor
11. Wheel
4. Coin Box
12. Wheel LED Light
5. Racing Seats
13. Small LED Headlight
6. Tail Brake LED Light 1
14. Large LED Headlight
7. Tail Brake LED Light 2
15. Maintenece Door
8. Signal LED Light
4
9. Power Plug
Coin Mech Detail Manual
3
4
2
1
WEIYEI HI-07CS
m
W 120mm
30m
W1
Electronic Coin Mech
1. Coin Reject Button
2. Key for Coin Machine #8153
3. Lock
4. Mounting Frame
W 63mm
5
Coin Mech Operating Manual
Adjust VR sensitivity Tuning
Clockwise: slack selection
Counter-clockwise: strict selection
6
Coin Mech Operating Manual
STEP 1
Choose the right coin for use in the clamp.
STEP 2
Adjust the right insert size for use from the front panel
back side.
STEP 3
Select the right mode: Normal Open/Normal Close
“Timer Switch” for synchronizing your system.
100ms (Slow Speed/Long Pulse)
50ms (Medium Speed/Medium Pulse)
30ms (Fast Speed/Short Pulse)
STEP 4
Adjust VR Sensitivity Tuning
Clockwise: slack selection (LED dark -> light)
Counter-clockwise: strict selection (LED light -> dark)
7
Coin Box Manual
3
2
1
4
5
Details
1. Key for Coin Box #103
2. Lock
3. Coin Box Frame
4. Coin Box
5. Door of Coin Box
Size: W:175mm x L: 145mm x H: 175mm
8
Maintenence Access Manual
1
Details
1. Security Access Screws
Sonic Kiddie Ride Motherboard.
9
Manual for the software of the machine
ACC,Horn
& Coin Mech
Service
Button
10
Counter
Variable
Speed
Lights
SFX
Volume
Dip Switch
Music
Volume
Motor Control
Connections
11
DIP Switch Adjustment
I = UP
O = DOWN
*Default switch position is down.
SW1 - Dip Switch 1
Free
1 Coin
2 Coins
3 Coins
4 Coins
5 Coins
Sound Test
1 Coin
10 Seconds
1 Minute
2 Minutes
2.5 Minutes
3 Minutes
3.5 Minutes
4 Minutes
5 Minutes
0 Second Delay
1 Second Delay
3 Second Delay
5 Second Delay
12
1
I
I
I
I
0
0
0
0
2
I
I
0
0
I
I
0
0
O=OFF I=ON
3 4 5 6 7 8
I
0
I
0
I
0
I
0
I I I
I 1 0
I 0 I
0 0 1
I 0 0
0 0 0
0 I I
0 I 0
I I
I 0
0 I
0 0
Service Engineers & Maintenence Personel
No Power
• Make sure the power connector is connected and have correct
voltage. Make sure all power switches are “ON”.
• Check the distribution switch is “ON”.
• Check power going out of the 24V transformer
Cannot Insert Coin
• Go to operator menu check coin setting.
• Reinstall reference coin.
• Make sure DIP switches are set for desired setting.
No Sound
• Go to operator menu change volume setting.
• Adjust amplifier volume.
• Check wire connecting speaker
• Make sure game is credited and ON
START/FX Button Failure
• Change micro switch.
• Check wire connecting.
• Check PCB connection
Ride Not Moving.
• Check motor for damage
• Inspect Orange torque Safety arm
• Inspect Gear Box for leaking oil.
• Check to see if there is debris blocking the base from moving.
Maintenence Guide
1. Please keep the machine clean. The exterior is touched by players,
resulting in it getting dirty, so please use neutral cleaners on surface.
2. Please regularly clean the machine to maintain appearance. Use
stain removers or detergents to clean and remove stains.
3. Check underneath the unit for debris.
4. The appliance must not be cleaned by a water jet.
5. Moving parts inside the appliance, turn off the power before
getting into the appliance.
13
For Spares and Technical
Service please contact
SEGA TOTAL SOLUTIONS.
SEGA TOTAL SOLUTIONS
42 Barwell Business Park
Leatherhead Road
Chessington
Surrey
KT9 2NY
United Kingdom
+44 (0)208 391 8072
technical@sega.co.uk