Roland MDX-540 Series SRP Milling Machine

CybridSystems.com
Crystal Lake IL. --- Phone: 224-565-5210 --- Fax: 815-477-8347
Roland MDX-540 Series SRP Milling Machine
Creates accurate prototypes for complex snap-fits.
Produces functional prototypes for proof of concept and
manufacturability testing.
Achieves smooth surface finish across a wide range of materials.
400W DC Brushless motor with increased torque for fast, accurate
prototypes.
Includes user-friendly CAM Software.
Handheld controller and virtual control panel simplifies setup.
Specialty MDX-540S and MDX-540SA models available for
enhanced precision and accurate, repeatable production.
Optional fourth rotary axis and automatic tool changer available.
Maximum 19.68" by 15.74" by 6.10" XYZ-Axis Travel.
Includes a factory-installed spindle unit tested for milling accuracy.
540S and 540SA models offer high quality milling for snap-fit
prototypes, smooth surface finishes and other advanced
applications. S models feature precision ball screws that achieve
repeat accuracy up to ±0.02 mm (±0.0008 in.)
th
*Shown with Tool Changer and Optional 4 -Axis Unit
MDX-540 (CNC Milling Machine, 19.6” x 15.7” x 6.1”) $20,995.00
MDX-540S (High Precision CNC Milling Machine, 19.6” x 15.7” x 6.1”) $26,995.00
MDX-540A (CNC Milling Machine, 15.7” x 15.7” x 6.1”) (Built-in ATC) $31,995.00
MDX-540SA (High Precision CNC Milling Machine, 15.7” x 15.7” x 6.1”) (Built-in ATC) $36,995.00
Safety Covers for the MDX-540 Series
ZBX-540D Exterior dimensions 37.1” x 39.5” x 39.4”, 121lbs (943mm x 1003mm x 1000mm)
ZBX-540E Exterior dimensions 41.0” x 40.6” x 38.5”, 150lbs (1042mm x 1030mm x 978mm)
$3,495.00
$1,540.00
Rotary Axis Unit
ZCL-540
(Rotary 4th Axis, 14.6” x 7.0” Working Diameter)
Support both 4-axis indexing and live 4-axis machining
$5,095.00
Automatic Tool Changer
ZAT-540 4-Position Tool Changer
$10,295.00
Includes: ATC Control box, ATC spindle, ATC magazine Setting clamp, spanner, (4) 1/4” tool holders and air tubing.
Optional T-Slot table
ZTT-540
$1395.00
T-Slot table gives you the ability to use a wide variety of clamps and clamping systems.
(For 8 mm clamp sets)
Cybrid Systems exclusive items for the MDX-540 Series SRP mills
Visualmill CAM Software
3-Axis seat – $1,250.00
4-Axis Seat - $2,500.00
Visualmill Pro - $5,000.00
All Metal Workbench - $2,195.00
TBL-540 - 42” x 48” Mobile table with 1 drawer, casters,
levels, adjustable height, and swing tray laptop stand.
Self-Center Vices
CY-6 6” Vice – Includes aluminum and steel jaws $1,350.00
CY-10 10” Vice - Includes aluminum and steel jaws $2,150.00
T-slot Tables
20 mm high x 250 mm long, M6 size fixturing, various lengths depending upon your setup. Standard lengths for the
MDX-540 are as follows:
CY-400T - 400 mm (15.74”) $145.00. This table is made for the 3-axis bed only and is not designed to fit with the 4thaxis unit installed. You can combine 2 of this table to cover the entire 3 axis working area when the tool changer is
installed.
CY-300T - 300 mm (11.81”) $95.00. This table fits behind the 4th-axis unit and in between the tool changer and 4th-axis
Z sensor.
Right angle mounting Plate – 71 mm x 71 mm x 75 mm (approx. 2.75” x 2.75” x 3.00”)
CY-3ANG - $25.00
Clamp bars – 225 mm long – set of 2
CY-CB225 - $55.00
CAM Lock Clamp
CY-CAMLC– $75.00
Adjustable Toggle Clamp
CY-ATClamp – $45.00 set of 2
8 mm Clamp Set
CY-8MM - $295.00
Works with both the standard and T-slot tables that come with the Roland MDX-540 Series
Collets for MDX-540 and MDX-540S (Non-Tool Changer collets)
US-EY16-3.5A (1/8” flex collet for the MDX-540 and MDX-540S)
US-EY16-5A (3/16” flex collet for the MDX-540 and MDX-540S)
US-EY16-7A (1/4” flex collet for the MDX-540 and MDX-540S)
US-EY16-10A (3/8” flex collet for the MDX-540A and MDX-540SA)
$81.95
$81.95
$81.95
$81.95
Collets for MDX-540A and MDX-540SA (Tool Changer collets)
US-COL7-1/8 (1/8” flex collet for the MDX-540A and MDX-540SA)
US-COL7-1/4 (1/4” flex collet for the MDX-540A and MDX-540SA)
US-COL7-5 (3/16” flex collet for the MDX-540A and MDX-540SA)
US-EY16-10A (3/8” flex collet for the MDX-540A and MDX-540SA)*Requires Chuck US-DMC10-52 sold separately
$59.95
$59.95
$59.95
$81.95
Tooling Kits
EM-KIT-SR (Short Reach Tooling Kit, Contains 1/8”, 1/16”, 1/32”, 1/64” Ball and
Flat End Mills)
$143.99
EM-KIT-LR (Long Reach Tooling Kit, Contains ¼”, 1/8”, 1/16”, 1/32”, 1/64” Ball
and Flat End Mills)
$379.99
Submicron grade carbide cutting tools manufactured with tight tolerances for precision milling. These kits include our
most popular sizes in two different lengths. Short reach tooling for small detailed work and long reach tooling for
reaching those hard to cut features. EM-KIT-SR and EM-KIT-LR are both recommended for all cutting needs.