Avigilon HD H.264 H3 Firmware Release Notes Version 22.214.171.124 – Released Jan 26, 2015 Issues Fixed Corrected an issue where certain cameras may incorrectly overexpose a scene Version 126.96.36.199 – Released Nov 21, 2014 New Features Added ability to configure MTU sizes in the network configuration Added option to retain usernames and password on firmware revert Issues Fixed Corrected an issue where very short duration files saved to SD cards, due to short duration movement in static scenes, would be corrupted Upon restore default, the camera’s configuration LED is now set to enabled Corrected an issue where a change to the camera’s name and location via ACC would not take effect on the camera’s overlay Corrected an issue where the firmware filename in the upgrade firmware dialog would be truncated Version 188.8.131.52 – Released Sept 22, 2014 New Features Added ability to optimize focus under IR lighting conditions Version 184.108.40.206 – Released Sept 8, 2014 New Features Added support for GB compliant mode of operation Ability to take a JPEG image snapshot to SD Card in MJPEG mode Version 220.127.116.11 – Released July 4, 2014 New Features Timestamp overlay now available on primary stream Increased number of privacy zones to 64 1 © 2015 Avigilon Corporation. All rights reserved. Avigilon HD H.264 H3 Firmware Release Notes Issues Fixed Timestamp for onboard storage is corrected to be time of first frame recorded instead of file creation time NTP configuration dialog controls fixed to properly reflect configured settings Switching 802.1x configuration when using certificate based authentication is now working Version 18.104.22.168 – Released May 16, 2014 New Features 802.1x authentication support using PEAP and EAP-TLS Version 22.214.171.124 – Released April 22, 2014 New Features Improved color accuracy for automatic white balance and WDR cameras Issues Fixed Fixed garbled audio when sending audio stream to multiple servers simultaneously Version 126.96.36.199 – Released Feb 25, 2014 Issues Fixed Fixed intermittent reboot issues on H3 box cameras Version 188.8.131.52 – Released December 24, 2013 New Features Improved color accuracy when using manual white balance Issues Fixed In WebUI, NTP server settings now accept IP address in addition to hostnames Reduced false motion detection during low light Version 184.108.40.206 – Released October 15, 2013 New Features Improved black-level adjustment at night 2 © 2015 Avigilon Corporation. All rights reserved. Avigilon HD H.264 H3 Firmware Release Notes LightCatcher cameras switch to monochrome at a lower light level Initial release for the following LightCatcher H.264 HD cameras: o 1.3L-H3-B1 o 1.3L-H3-B2 o 1.3L-H3-B3 o 1.3L-H3-DC1 o 1.3L-H3-DC2 o 1.3L-H3-DP1 o 1.3L-H3-DP2 o 1.3L-H3-DO1 o 1.3L-H3-DO2 o 1.3L-H3-D1 o 1.3L-H3-D2 Issues Fixed Cameras in WDR mode switch to monochrome at the same light level as when they are not using WDR mode For cameras with integrated IR, improved focus when switching from color to monochrome Removed false motion detection when adaptive IR is on Version 220.127.116.11 – Released September 12, 2013 New Features Improved colors when primary stream compression is MJPEG Improved sharpening and saturation Increase effectiveness of sharpness slider Issues Fixed Focus and zoom position lost after reboot (introduced in version 18.104.22.168 ONLY) Version 22.214.171.124 – Released July 30, 2013 New Features Ability to stream from camera to an FFMPEG player Issues Fixed Camera automatically refocuses when the zoom position is changed Removed false motion detection when IR is on 3 © 2015 Avigilon Corporation. All rights reserved. Avigilon HD H.264 H3 Firmware Release Notes Version 126.96.36.199 – Released June 7, 2013 New Features WebUI JPEG URI in the compression setup page shows the IP-address or hostname Issues Fixed WebUI Apply button is only enabled if something is changed WebUI System page is refreshed after an upgrade/reboot/restart Version 188.8.131.52 – Released March 25, 2013 New Features Full resolution still image HTTP URI available in web interface when primary stream compression is MJPEG ONVIF Profile S conformant Motion detection sensitivity is reduced during movement of the IR cut filter movement to prevent false motion detection events Content adaptive IR sensitive to smaller objects Support for indoor and outdoor domes with integrated IR illuminator with zoom and scene adaptive IR illumination Privacy zones are masked for auto-exposure and backlight compensation Issues Fixed Monochrome encoding issue that could result in false color applied on display addressed DHCP gateway displayed correctly in web interface Version 184.108.40.206 – Released December 21, 2012 Issues Fixed Backlight compensation control issue resolved for 1MP, 2MP, and 5MP cameras Version 220.127.116.11 – Released December 14, 2012 New Features Scene-adaptive wide dynamic range algorithms added to 3.0W-H3 WDR cameras and dome cameras improving image quality and dynamic range for all scenes 4 © 2015 Avigilon Corporation. All rights reserved. Avigilon HD H.264 H3 Firmware Release Notes Improved white balance speed and color reproduction for 3.0W-H3 WDR cameras and dome cameras Additional optimization of automatic P-Iris control to improve image sharpness and detail at all light levels Extended browser support for web user interface Improved monochrome encoding, improving resolution in moderate low light Optimized sharpening settings for improved image quality in bright conditions Issues Fixed Status LED behavior updated Focus issue with presets resolved Potential reboot of 3.0W-H3 after resolution change resolved Backlight compensation issue for 3MP and 5MP H3 cameras resolved Genetec connection issue resolved Various web user interface issues resolved Version 18.104.22.168 – Released June 27, 2011 Issues Fixed Potential issue with increased video latency when running at maximum bit rate for extended periods Version 22.214.171.124 – Released June 22, 2011 New Features Initial release of firmware for the following HD H.264 cameras o 1.0-H3-B1 o 2.0-H3-B1 Version 126.96.36.199 – Released June 12, 2011 New Features Initial release of firmware for the following HD H.264 cameras and dome cameras: o 1.0-H3-B2 o 2.0-H3-B2 o 3.0W-H3-B2 5 © 2015 Avigilon Corporation. All rights reserved. Avigilon HD H.264 H3 Firmware Release Notes o o o o o o o o o o o o o o o o o 5.0-H3-B2 1.0-H3-D1 1.0-H3-DO1 1.0-H3-DP1 1.0-H3-DC1 2.0-H3-D1 2.0-H3-DO1 2.0-H3-DP1 2.0-H3-DC1 3.0W-H3-D1 3.0W-H3-DO1 3.0W-H3-DP1 3.0W-H3-DC1 5.0-H3-D1 5.0-H3-DO1 5.0-H3-DP1 5.0-H3-DC1 6 © 2015 Avigilon Corporation. All rights reserved.