Samsung TFT Color YP-T7J Front Cover Button Replacement

Samsung TFT Color YP-T7J Front Cover Button Replacement
Samsung TFT Color YP-T7J Front Cover
Button Replacement
The objective of this guide is to demonstrate how to replace the button on the front of the
MP3 player.
Written By: Jason Farr
TOOLS:
Plastic Opening Tools (1)
Phillips #0 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 7
Samsung TFT Color YP-T7J Front Cover Button Replacement
Step 1 — The Back Cover

Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
Step 2

Remove the screw on each side of the device using a Phillips head screwdriver.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 7
Samsung TFT Color YP-T7J Front Cover Button Replacement
Step 3

Using the plastic opening kit, place the prying end of the kit into the opening created by
removing the screws.

Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.
Step 4 — The Battery

Once the back cover has been removed the battery will be visible.

Pry the battery from the device.
 NOTE: The battery should still be connected to the device
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 7
Samsung TFT Color YP-T7J Front Cover Button Replacement
Step 5

Unplug the battery connecting cables.
 NOTE: The battery now should be free from all connections to the device.
Step 6 — USB Connector Dock

Once the battery has been removed you can see the motherboard.

Unscrew 4 screws on the metal docket using a Phillips head screw driver.

The USB connector can now be taken off of the device.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 7
Samsung TFT Color YP-T7J Front Cover Button Replacement
Step 7 — The Front Cover

Using the philips screwdriver, remove the two screws on the mother board.
Step 8

Place the pry tool in-between the front cover and mother board.

Gently separate the front cover.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 7
Samsung TFT Color YP-T7J Front Cover Button Replacement
Step 9

After opening the front cover you
will see and electric ribbon
connecting the buttons to the
mother board.
Step 10
 CAUTION: Do not rip the electric ribbon from the mother board.

Carefully flip up the plastic lip that holds the electric ribbon to the board.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 7
Samsung TFT Color YP-T7J Front Cover Button Replacement
Step 11 — Front Cover Button

Once the front cover is separated from the device, locate the four screws in the metal
plate.

Using the small phillips screw driver, remove the four screws.

Remove the metal cover.
Step 12

Remove the rubber button pad.
To reassemble your device, follow these instructions in reverse order.
This document was last generated on 2015-05-10 02:08:35 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 7