ENGLISH
Matrox TripleHead2Go
Analog Edition • Digital Edition
User Guide
20020-301-0102
2008.11.06
Overview
Thank you for purchasing Matrox TripleHead2Go. This product allows your single-display graphics
hardware to support Matrox TripleHead features. TripleHead features control 3 displays at a time.
Depending on your Matrox product, you can connect up to 3 analog or digital monitors at a time to
your Matrox TripleHead2Go product.
Hardware supplied
TripleHead2Go Analog Edition
Matrox hardware
Matrox cable
(HD15-to-HD15)
Matrox cable
(DVI-to-HD15)
Power supply
Matrox cable
(DVI-to-DVI)
USB cable
TripleHead2Go Digital Edition
Matrox hardware
Matrox cable
(HD15-to-HD15)
Software supplied (for Windows 2000, Windows XP, Windows XP
Professional x64, and Windows Vista)
2
„
Matrox PowerDesk-SE – to use your Matrox product
„
Other software – see the CD-ROM Readme file
Matrox TripleHead2Go – User Guide
Installation overview
To install your Matrox product:
1
Connect your monitors – see “Connection setup – TripleHead2Go Analog Edition”, page
4 or “Connection setup – TripleHead2Go Digital Edition”, page 7.
2
Install the software – see “Software setup”, page 13.
Matrox TripleHead2Go – User Guide
3
Connection setup – TripleHead2Go
Analog Edition
This section describes how to connect 3 analog monitors to your Matrox product.
Note: To get the most out of your Matrox product, we recommend you use 3 identical
monitors (that is, monitors that support the same settings such as display resolution and
refresh rate). For information on the settings your monitor supports, see your monitor
documentation.
Connection overview
Matrox cable
INPUT
CENTER
Monitor cable
(HD-15)
RIGHT
LEFT
Power supply
cable
Monitor cable
(HD-15)
Monitor cable
(HD-15)
Step-by-step connection setup
1
Turn off computer
Before you connect your Matrox product, make sure you shut down your system and turn off
your computer.
WARNING: Don’t change monitor connections while your computer is turned on. While
your computer is turned on, it may be using monitor settings that are specific to the current
monitor connections. Some devices may be permanently damaged if incorrect settings are
used.
4
Matrox TripleHead2Go – User Guide
2
Attach the Matrox cable
Attach one end of the cable provided with
your Matrox product to the connector on
your computer. Attach the other end of the
cable to the connector labeled INPUT on
your Matrox product.
Matrox cable
If your graphics hardware has an HD-15
connector, use the Matrox HD15-to-HD15
cable to connect your Matrox product.
If your graphics hardware has a DVI
connector, use the Matrox DVI-to-HD15
cable to connect your Matrox product.
3
Connect the first monitor
Use your monitor cable to connect your
preferred monitor to the connector labeled
CENTER (
) on your Matrox
product.
Monitor cable
(HD-15)
4
Connect the second monitor
Use your monitor cable to connect your
second monitor to the connector labeled
LEFT (
) on your Matrox
product.
5
Monitor cable
(HD-15)
Connect the third monitor
Use your monitor cable to connect your
third monitor to the connector labeled
RIGHT (
) on your Matrox
product.
Monitor cable
(HD-15)
Matrox TripleHead2Go – User Guide
5
6
Connect the external power
supply
Attach one end of the power supply cable
provided with your Matrox product to the
power connector on your Matrox product.
Plug the power supply cord into an electrical
outlet.
Power supply
cable
Your Matrox product is now connected. Restart your computer and install your Matrox software (see
“Software setup”, page 13).
6
Matrox TripleHead2Go – User Guide
Connection setup – TripleHead2Go
Digital Edition
This section describes how to connect up to 3 analog or digital monitors to your Matrox product.
Note: While using the DVI input connector on your Matrox product, the highest display
resolutions are available only with graphics hardware that supports dual-link DVI. For
information on the capabilities of your graphics hardware, see its documentation. For
more information on your Matrox product, see “Product information”, page 21.
Note: To get the most out of your Matrox product, we recommend you use identical
monitors (that is, monitors that support the same settings such as display resolution and
refresh rate). For information on the settings your monitor supports, see your monitor
documentation.
WARNING: Don’t change monitor connections while your computer is turned on. While
your computer is turned on, it may be using monitor settings that are specific to the current
monitor connections. Some devices may be permanently damaged if incorrect settings are
used.
Note: To connect a digital monitor (a
monitor that uses digital input, usually a
flat panel monitor) to your Matrox
product, your monitor must have a DVI
connector.
HD-15 connector
(analog)
If you have an analog monitor (a monitor
DVI connector
DVI connector
that uses analog input) with a DVI
(analog/digital)
(digital)
connector and you want to connect it to
an HD-15 connector, you’ll need a separate adapter. If this adapter isn’t included with your
monitor, contact your monitor vendor.
Some monitors with DVI connectors support both digital and analog input. If you’re using
one of these monitors with your Matrox product, make sure it’s configured to use the
correct type of input. For more information, see your monitor documentation.
Matrox TripleHead2Go – User Guide
7
Connection overview – TripleHead setup
Input connector
(HD-15
)
Input connector
(DVI
)
Matrox cable
(HD15-to-HD15)*
Matrox cable
(DVI-to-DVI)*
Monitor cable
(DVI)
USB cable
* Depending on your graphics hardware, you need to attach either the Matrox HD15-to-HD15 cable or the Matrox DVI-to-DVI
cable to the input connector on your Matrox product.
Step-by-step connection setup – TripleHead setup
1
Turn off computer
Before you connect your Matrox product, make sure you shut down your system and turn off
your computer.
2
Attach the Matrox cable
If your graphics hardware has a DVI
connector, attach one end of the Matrox
DVI-to-DVI cable provided with your
Matrox product to the graphics connector
on your computer. Attach the other end of
the cable to the DVI input connector
(
) on your Matrox product.
8
Matrox TripleHead2Go – User Guide
Matrox cable
(DVI-to-DVI)
If your graphics hardware has an HD-15
connector, attach one end of the Matrox
HD15-to-HD15 cable provided with your
Matrox product to the graphics connector
on your computer. Attach the other end of
the cable to the HD-15 input connector
(
) on your Matrox product.
Matrox cable
(HD15-to-HD15)
3
Connect the first monitor
If your monitor has a DVI connector, use
your monitor cable to connect your first
monitor directly to the first connector
(
) on your Matrox product.
Monitor cable
(DVI)
If your monitor has an HD-15 connector,
use a DVI-to-HD15 adapter (sold
separately) to connect your monitor to the
connector.
4
Connect the second monitor
If your monitor has a DVI connector, use
your monitor cable to connect your second
monitor directly to the second connector
(
) on your Matrox product.
Monitor cable
(DVI)
If your monitor has an HD-15 connector,
use a DVI-to-HD15 adapter (sold
separately) to connect your monitor to the
connector.
5
Connect the third monitor
If your monitor has a DVI connector, use
your monitor cable to connect your third
monitor directly to the third connector
(
) on your Matrox product.
If your monitor has an HD-15 connector,
use a DVI-to-HD15 adapter (sold
separately) to connect your monitor to the
connector.
Monitor cable
(DVI)
Matrox TripleHead2Go – User Guide
9
6
Connect the USB cable
Plug one end of the USB cable provided with
your Matrox product into the USB
connector (
) on your Matrox product.
Plug the other end of the USB cable into a
powered USB port on your computer. For
more information on powered USB ports,
see your system manual.
USB cable
Note: If your computer doesn’t have a powered USB port, you’ll need a separate adapter.
To purchase a Matrox power adapter for your product, see the Matrox online store
(http://shopmatrox.com).
Your Matrox product is now connected. Restart your computer and install your Matrox software (see
“Software setup”, page 13).
Connection overview – DualHead setup
Matrox cable
(HD15-to-HD15)*
Input connector
(HD-15
)
Input connector
(DVI
)
Matrox cable
(DVI-to-DVI)*
USB cable
Monitor cable
(DVI)
* Depending on your graphics hardware, you need to attach either the Matrox HD15-to-HD15 cable or the Matrox DVI-to-DVI
cable to the input connector on your Matrox product.
10 Matrox TripleHead2Go – User Guide
Step-by-step connection setup – DualHead setup
1
Turn off computer
Before you connect your Matrox product, make sure you shut down your system and turn off
your computer.
2
Attach the Matrox cable
If your graphics hardware has a DVI
connector, attach one end of the Matrox
DVI-to-DVI cable provided with your
Matrox product to the graphics connector
on your computer. Attach the other end of
the cable to the DVI input connector
(
) on your Matrox product.
Matrox cable
(DVI-to-DVI)
If your graphics hardware has an HD-15
connector, attach one end of the Matrox
HD15-to-HD15 cable provided with your
Matrox product to the graphics connector
on your computer. Attach the other end of
the cable to the the HD-15 input connector
(
) on your Matrox product.
Matrox cable
(HD15-to-HD15)
3
Connect the first monitor
If your monitor has a DVI connector, use
your monitor cable to connect your first
monitor directly to the first connector
(
) on your Matrox product.
Monitor cable
(DVI)
If your monitor has an HD-15 connector,
use a DVI-to-HD15 adapter (sold
separately) to connect your monitor to the
connector.
Matrox TripleHead2Go – User Guide 11
4
Connect the second monitor
If your monitor has a DVI connector, use
your monitor cable to connect your second
monitor directly to the third connector
(
) on your Matrox product.
If your monitor has an HD-15 connector,
use a DVI-to-HD15 adapter (sold
separately) to connect your monitor to the
connector.
5
Monitor cable
(DVI)
Connect the USB cable
Plug one end of the USB cable provided with
your Matrox product into the USB
connector (
) on your Matrox product.
Plug the other end of the USB cable into a
powered USB port on your computer. For
more information on powered USB ports,
see your system manual.
USB cable
Note: If your computer doesn’t have a powered USB port, you’ll need a separate adapter.
To purchase a Matrox power adapter for your product, see the Matrox online store
(http://shopmatrox.com).
Your Matrox product is now connected. Restart your computer and install your Matrox software (see
“Software setup”, page 13).
12 Matrox TripleHead2Go – User Guide
Software setup
This section describes how to install Matrox software for Windows
2000, Windows XP, Windows XP Professional x64, and Windows
Vista.
You may need administrator rights to install certain software. For
more information, see Windows documentation or contact your
system administrator.
1
Install your Matrox software
Note: Windows 2000 – If you’re using a laptop computer, make sure your TripleHead2Go
product is set as your primary display and your computer’s flat panel monitor is set as your
secondary display before installing your Matrox software. Otherwise, your Matrox software
won’t install. For more information on enabling your displays, see your graphics hardware
documentation.
Insert the Matrox installation CD-ROM in your CD-ROM drive – the CD-ROM installation
program automatically starts.* Follow the on-screen instructions.
2
Change your display settings (optional)
After the installation is complete, you should be using a stretched display mode. While using
stretched mode, your individual displays are combined to form a single stretched display.
If you’re not using a stretched display mode or if you want to change your current display
settings (for example, your display resolution), use Matrox PowerDesk software to change
these settings. For more information on changing display settings, see Matrox PowerDesk
help.
Accessing PowerDesk
Your Matrox software includes Matrox PowerDesk software. This software helps you get the most out
of your Matrox product. Use Matrox PowerDesk software to change certain display settings or access
Matrox features. To access PowerDesk, click its icon ( ) on your Windows taskbar. To see the
PowerDesk icon in Windows XP/Vista, you may need to click the Show hidden icons button ( ) on
your Windows taskbar. For more information on how to use Matrox PowerDesk, see Matrox
PowerDesk help.
* If Windows doesn’t automatically start the setup program, you can run the setup program from the Umbrella folder of the
CD-ROM.
Matrox TripleHead2Go – User Guide 13
Troubleshooting
This section addresses possible problems that could prevent you from using your Matrox product.
Problem
1Cause
Computer doesn’t display information after Matrox product is
connected
Your Matrox product may not be properly connected.
1Solution
Make sure your Matrox product is properly connected and that all connectors are properly
fastened.
2Solution
Try reconnecting your monitors, power supply cable, or USB cable. For more information,
see “Connection setup – TripleHead2Go Analog Edition”, page 4 or “Connection setup –
TripleHead2Go Digital Edition”, page 7.
2Cause
Your Matrox product may not support the selected display mode.
1Solution
Make sure your Matrox product supports the selected display mode. For more information,
see “Supported display modes”, page 21.
Problem
No power indicator light (black)
1Cause
Your power supply cable or USB cable may
not be properly connected.
Power
indicator
light
TripleHead2Go Digital Edition shown
1Solution
2Cause
3Solution
Make sure your power supply cable or USB cable are properly connected. For more
information, see “Connection setup – TripleHead2Go Analog Edition”, page 4 or
“Connection setup – TripleHead2Go Digital Edition”, page 7.
TripleHead2Go Digital Edition only – Your USB cable may not be connected to a powered
USB port.
Make sure your USB cable is connected to a powered USB port. If the USB port you’re
currently using isn’t powered, try using a different USB port.
14 Matrox TripleHead2Go – User Guide
Problem
1Cause
1Solution
2Cause
Power indicator light is red
Your Matrox product may not support the selected display mode.
Make sure your Matrox product supports the selected display mode. For more information,
see “Supported display modes”, page 21.
There may be unsupported graphics hardware in your computer.
1Solution
Make sure your Matrox product supports your graphics hardware by running the Matrox
System Compatibility Tool (www.matrox.com/graphics/triplehead2go/support).
Problem
After the startup screen, or after display settings are changed, the
screen image is garbled or unusable
(blank screen, rolling or overlapping screen images)
1Cause
An unsupported display mode may have been selected.
1Solution
If one of your displays is usable, use Matrox PowerDesk to change your display mode. For
more information, see Matrox PowerDesk help.
2Solution
If all your displays are unusable, change your display resolution in Windows.
1
Restart your computer in VGA mode.
Windows 2000/XP/Vista –
a
Click Start Æ Shut Down Æ Restart Æ OK* to restart your computer. (* Depending
on your version and configuration of Windows, this part of the step may not be
necessary.)
If your primary monitor is unusable, see your system manual for information on
how to restart your computer using a hardware control.
b
Before Windows starts, press [F8] for the Windows startup menu to appear. (If [F8]
doesn’t work, instead try pressing and holding [Ctrl] before Windows starts.)
Select “VGA mode” (or “Low resolution mode”), then press [Enter].
2
Change your display resolution:
Windows 2000 –
a
Right-click your Windows desktop background, then click Properties Æ Settings.
b
Move the Screen area slider to a stretched mode resolution (for example, 2400 ×
600), then click OK.
Matrox TripleHead2Go – User Guide 15
Windows XP –
a
Right-click your Windows desktop background, then click Properties Æ Settings.
b
Move the Screen resolution slider to a stretched mode resolution (for example, 2400
× 600), then click OK.
Windows Vista –
3
Problem
1Cause
1Solution
2Cause
1Solution
a
Right-click your Windows desktop background, then click Personalize Æ Display
Settings.
b
Move the Resolution slider to a stretched mode resolution (for example, 2400 ×
600), then click OK.
Restart your computer normally.
Desktop isn’t stretched across monitors
A stretched display mode may not be selected.
From the Matrox PowerDesk main interface, select a stretched mode. For more information,
see “Supported display modes”, page 21.
Laptop users only – Your secondary display may not be enabled in Windows.
Make sure your display is enabled:
Windows 2000/XP –
1
Right-click your Windows desktop background, then click Properties Æ Settings.
2
Select any disabled display, enable the Extend my Windows desktop onto this monitor
check box, then click Apply.
Windows Vista –
2Solution
1
Right-click your Windows desktop background, then click Personalize Æ Display
Settings.
2
Select any disabled display, enable the Extend the desktop onto this monitor check box,
then click Apply.
If no secondary display is available in Windows, your secondary display may not be enabled
on your system. For more information on how to enable your secondary display, see your
system or graphics hardware documentation.
16 Matrox TripleHead2Go – User Guide
Problem
1Cause
Certain display resolutions are unavailable
The image quality of your displays may need to be adjusted.
1Solution
Make sure your Matrox product supports your graphics hardware by running the Matrox
System Compatibility Tool (www.matrox.com/graphics/triplehead2go/support).
2Cause
Certain display resolutions may be listed even though they may not be supported by your
Matrox product.
1Solution
Make sure your Matrox product supports the selected display resolution. For more
information, see “Supported display modes”, page 21.
2Solution
Make sure your Matrox software is installed. For more information, see “Software setup”,
page 13.
3Cause
TripleHead2Go Digital Edition only – While using the DVI input connector on your Matrox
product, the highest display resolutions are available only with graphics hardware that
supports dual-link DVI.
1Solution
If your graphics hardware has an HD-15 connector, use this connector instead. For more
information, see “Connection setup – TripleHead2Go Digital Edition”, page 7.
2Solution
If your graphics hardware has only a DVI connector, use a DVI-to-HD15 adapter to connect
your graphics hardware to the HD-15 input connector on your Matrox product. To purchase
a Matrox DVI-to-HD15 adapter for your product, see the Matrox online store
(http://shopmatrox.com).
4Cause
Windows identifies the highest display mode and discards all modes with a higher vertical or
horizontal resolution. In Windows 2000/XP, the highest display mode is the one with the
highest horizontal resolution. In Windows Vista, the highest display mode is the one with the
highest vertical resolution.
1Solution
Disable Windows mode pruning to view all available display modes:
1
Windows 2000/XP – Right-click your Windows desktop background, then click
Properties Æ Settings.
Windows Vista – Right-click your Windows desktop background, then click Personalize
Æ Display Settings.
2
Select the display for your GXM hardware, then click Advanced Æ Monitor. Make sure
Hide modes that this monitor cannot display is clear.
3
Click OK Æ OK.
Matrox TripleHead2Go – User Guide 17
2Solution
In the Matrox PowerDesk reported mode list, keep a display mode with a higher display
resolution (such as 1920 × 1200) and remove a mode with a lower display resolution (such
as 1024 × 768). For more information, see Matrox PowerDesk help.
Problem
Display on flat panel monitor appears blurry or uses only a portion of
the screen
1Cause
The image quality of your displays may need to be adjusted.
1Solution
Use the Adjust Image Quality option in Matrox PowerDesk to adjust the image quality of your
displays. For more information, see Matrox PowerDesk help.
2Cause
You may be using a lower display resolution than what your flat panel monitor supports. If
your monitor supports display scaling, the image on your screen may appear blurry. If display
scaling isn’t supported, the display may use only a portion of your screen.
1Solution
Select the highest display resolution available. This generally results in better image quality.
Problem
Wrong color balance, blurry text, or screen image off-center
1Cause
1Solution
2Cause
1Solution
You may be using different types of monitors.
To get the most of your Matrox product, we recommend you use identical monitors while
using Matrox TripleHead2Go.
Your monitor video controls may be improperly set.
Adjust your monitor controls (brightness, contrast, and so on). For more information, see
your monitor manual.
Note: While using Matrox TripleHead2Go, gamma correction for each monitor isn’t
supported.
3Cause
1Solution
4Cause
1Solution
Your monitors may not be properly connected.
Make sure all connectors are properly fastened (see “Connection setup – TripleHead2Go
Analog Edition”, page 4 or “Connection setup – TripleHead2Go Digital Edition”, page 7).
The image quality of your displays may need to be adjusted.
Use the Adjust Image Quality option in Matrox PowerDesk to adjust the image quality of your
displays. For more information, see Matrox PowerDesk help.
18 Matrox TripleHead2Go – User Guide
2Solution
If your monitor has an auto-adjust control, try using it to adjust the image quality of your
displays. For more information, see your monitor manual.
Problem
Screen image defects appear
(tearing)
1Cause
You may be using a higher display resolution than what your graphics hardware supports.
1Solution
Select a lower display resolution. This generally results in better image quality.
2Solution
If you’re using a 32-bit color palette, try using a 16-bit color palette instead.
Problem
Matrox product isn’t automatically detected
1Cause
Your Matrox product may not support the selected display mode or the graphics hardware in
your computer.
1Solution
Make sure your Matrox product supports the selected display mode. For more information,
see “Supported display modes”, page 21.
2Solution
Make sure your Matrox product supports your graphics hardware.
Problem
Program window or dialog box doesn’t appear on screen
1Cause
1Solution
2Cause
1Solution
3Cause
Another window or dialog box may be covering the window or dialog box you want to see.
Move, close, or minimize any window or dialog box that may be covering the window or
dialog box you want to see.
If you’re using multi-display mode, the program window or dialog box may be in a display
or on a monitor that’s unusable. (For example, your monitor may not be properly connected
or configured.)
Make sure all the displays and monitors you want to use are usable. For more information,
see other troubleshooting items in this guide.
The program window or dialog box may be somewhere off-screen.
1Solution
If the program window you want to see is named on the Windows taskbar, right-click on it
and select Maximize. (If you click Restore the program window goes back to its previous
position. To fix this problem, see the other solutions.)
2Solution
Manually move the program window or dialog box:
1
Press [Alt]+[Space].
Matrox TripleHead2Go – User Guide 19
3Solution
2
If you see a pop-up menu, click Move. If you don’t see a pop-up menu, press [M] (for
Move).
3
Press one of the arrow keys once and move your mouse pointer to where you want the
window or dialog box to appear, then click. The program window or dialog box should
appear where you clicked.
1
Click the Matrox PowerDesk icon (
) on your Windows taskbar, then click Desktop
Management.
2
3
Enable one or more of the following features:
ƒ
Open program windows
ƒ
Center dialog boxes and message boxes
Choose where you want the program window or dialog box to appear.
For more information, see Matrox PowerDesk help.
Problem
1Cause
3D programs don’t work
While using display resolutions above 2048 × 1536, certain graphics hardware may not
properly support 3D acceleration.
1Solution
For information on the capabilities of your graphics hardware, see its documentation.
Problem
After game starts, monitor doesn’t display properly
1Cause
1Solution
You may not be using Matrox Surround Gaming Utility to run your game.
Try using Matrox Surround Gaming Utility to run your game. This utility configures your
game to run properly with your Matrox product.
More Information
We provide additional information in help and Readme files. Be sure to check for any last-minute
release notes included with your product and in the Matrox CD-ROM Readme file. Also, check the
Matrox Web site (www.matrox.com/graphics/gxm) for the latest Matrox software, technical support,
and product information. This user guide is also available on the CD-ROM as an Adobe Reader file
(Guide\Guide.pdf).
20 Matrox TripleHead2Go – User Guide
Product information
Supported display modes
TripleHead2Go Analog Edition
Multi-display setup
Display resolution
Vertical refresh rate (Hz)
3840 × 1024
60
3072 × 768
75*
2400 × 600
60
1920 × 480
60
Stretched mode
* While using flat panel monitors, we recommend using a refresh rate of 60 Hz.
TripleHead2Go Digital Edition
Multi-display setup
Display resolution
Vertical refresh rate (Hz)*
3840 × 1024†
60
3072 × 768†
60
2400 × 600
60
1920 × 480
60
Stretched mode
* Listed are the manufacturer’s default settings. For TripleHead2Go Digital Edition, additional display modes are available through
Matrox PowerDesk software. For more information, see Matrox PowerDesk help.
† Available only with graphics hardware that supports HD-15 or dual-link DVI connections.
Notes
„
For the latest compatibility information, see the Matrox Web site
(www.matrox.com/graphics/triplehead2go/support).
„
Only one (1) Matrox TripleHead2Go product at a time can be connected to your
computer.
„
Matrox PowerDesk software supports only Windows 2000, Windows XP, Windows XP
Professional ×64, and Windows Vista.
„
The display resolutions and refresh rates available depend on your monitor and software
monitor settings. For more information on the capabilities of your monitor, see your
monitor documentation.
Matrox TripleHead2Go – User Guide 21
„
TripleHead2Go Digital Edition only – While using the DVI input connector on your
Matrox product, the highest display resolutions are available only with graphics
hardware that supports dual-link DVI.
„
TripleHead2Go Digital Edition only – While using graphics hardware that supports only
single-link DVI output, the maximum display resolution is 2048 × 768 at 60 Hz in
DualHead mode and 2400 × 600 at 60 Hz in TripleHead mode.
„
Certain Intel integrated chipsets aren’t supported with Matrox TripleHead2Go.
„
While using display resolutions above 2048 × 1536, certain graphics hardware may not
properly support 3D acceleration. For information on the capabilities of your graphics
hardware, see its documentation.
„
While using some graphics hardware and software, certain limitations may apply. For
information on the capabilities of your graphics hardware, see its documentation.
„
To get the most of your Matrox product, we recommend you use identical monitors (that
is, monitors that support the same settings such as display resolution and refresh rate).
For more information on the settings your monitor supports, see your monitor
documentation.
„
While using Matrox TripleHead2Go, using software-based On-Screen Display (OSD)
controls to adjust the image quality of your monitors isn’t supported.
„
While adjusting your image quality, your displays may become blank for a few seconds.
„
While an unsupported display mode is selected, your displays may be unusable.
Environmental specifications
„
Minimum/maximum ambient operating temperatures: 0 to 55º C
„
Minimum/maximum storage temperature: -40 to 75º C
„
Maximum altitude for operation: 3,000 meters
„
Maximum altitude for transport: 12,000 meters
„
Operating humidity: 20 to 80% relative humidity (non-condensing)
„
Storage humidity: 5 to 95% relative humidity (non-condensing)
22 Matrox TripleHead2Go – User Guide
Customer support
Matrox Web
Matrox is on the Internet with a World Wide Web (WWW) site. Our Web site has product literature,
press releases, technical material, a sales office list, trade show information, and other relevant
material.
„
Visit the Matrox Graphics Web site at www.matrox.com/graphics.
„
E-mail questions or comments regarding the site to webmaster@matrox.com.
If you have a problem
Matrox values your business and offers preferred support for your Matrox product. For product
support, contact your Matrox representative or visit our technical support Web site at
www.matrox.com/graphics/support.
Information we need
Please give a complete description of the problem, and include:
„
Matrox product serial number, model number, revision number, display mode (display
resolution and refresh rate), firmware version, and PowerDesk version.
„
System compatibility information.
„
Graphics hardware model, processor speed, and amount of memory.
„
Operating system, version, and service pack.
„
Brand and model of any other graphics cards and devices installed on your system.
Matrox TripleHead2Go – User Guide 23
Where to get information
For information on PowerDesk software:
Windows 2000/XP/Vista –
1
Click the PowerDesk icon ( ) on your Windows taskbar to access the main
PowerDesk menu. To see the PowerDesk icon in Windows XP/Vista, you may need
to click the Show hidden icons button ( ) on your Windows taskbar.
2
Click About.
For system information:
„
„
Windows 2000 – Right-click the My Computer icon on your Windows desktop
background, then click Properties.
Windows 2000/XP – Click Start Æ Programs Æ Accessories Æ System Tools Æ System
Information.
„
Windows XP – Click Start Æ Settings* Æ Control Panel Æ Performance and
Maintenance* Æ System (double-click*). (* Depending on your configuration of
Windows, this part of the step may not be necessary.)
„
Windows Vista – Click Start Æ Settings* Æ Control Panel Æ System and Maintenance
Æ System. (* Depending on your configuration of Windows, this part of the step may
not be necessary.)
24 Matrox TripleHead2Go – User Guide
Warranty
Shall only apply after the Matrox System Compatibility Tool has been successfully completed.
A. Limited Warranty Statement
1. Matrox Graphics Inc. (“Matrox”) warrants to the end-user customer, who provides adequate proof of purchase and
adequate proof of system validation from the Matrox System Compatibility Tool that Matrox hardware products
purchased from Matrox authorized dealers will be free from defects in materials and workmanship for a period of two
(2) years from the date of purchase. This warranty applies only to the original end-user purchaser and is nontransferable. MATROX DOES NOT WARRANT THAT THE OPERATION OF THE PRODUCTS PURCHASED FROM
MATROX WILL BE UNINTERRUPTED OR ERROR-FREE, THAT DEFECTS IN THE PRODUCTS WILL BE
CORRECTED, OR THAT THE PRODUCTS WILL MEET THE CUSTOMER’S REQUIREMENTS OR PERFORM WITH
ANY HARDWARE OR SOFTWARE PROVIDED BY THIRD PARTIES. Conditions and limitations of Matrox’s warranty
are stated below.
2. Matrox’s limited warranty covers only those defects which arise as a result of normal use of the hardware and does
not apply to any:
a. improper or inadequate maintenance;
b. incompatibilities due to the user’s hardware or software applications with or in which the Matrox product
interfaces;
c. product of a special or custom-made nature;
d. unauthorized modification or misuse;
e. improper installation, misapplication or negligence;
f. operation outside the product’s environmental specifications;
g. improper site preparation or maintenance;
h. software;
i. other causes that do not relate to a product defect;
j. defects or damage suffered as a result of force majeure (including theft);
k. defects or damage suffered as a result of normal wear and tear, and/or
l. stolen goods.
3. If Matrox receives, during the applicable warranty period, notice of a defect in a warranted hardware product and the
defective Matrox product in question, Matrox shall at its sole option, either repair or replace the product, and shall
return the repaired product or a replacement product within a reasonable delay. The replacement product may not be
new, provided that it has functionality at least equal to that of the product being replaced.
4. This warranty is valid in any country where Matrox hardware products are distributed by Matrox or its authorized
dealers.
5. This Limited Warranty Statement gives the customer specific legal rights. The customer may also have other rights
which vary from state to state in the United States, from province to province in Canada, and from country to country
elsewhere in the world.
B. Limitations of Warranty
1. NEITHER MATROX NOR ANY OF ITS THIRD PARTY SUPPLIERS MAKES ANY OTHER WARRANTY OF ANY KIND,
WHETHER EXPRESSED OR IMPLIED, WITH RESPECT TO MATROX PRODUCTS. MATROX SPECIFICALLY
DISCLAIMS (and the customer, by accepting the Matrox product, specifically accepts such disclaimer and waives)
ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR OR INTENDED PURPOSE OR USE AND
THE WARRANTY AGAINST LATENT DEFECTS, WITH RESPECT TO THE HARDWARE AND/OR SOFTWARE.
Matrox TripleHead2Go – User Guide 25
MATROX FURTHER DISCLAIMS ANY WARRANTY THAT MATROX PRODUCTS, IN WHOLE OR IN PART, WILL BE
FREE FROM INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY OR PROPRIETARY RIGHTS.
2. To the extent that this Limited Warranty Statement is inconsistent with the law of the locality where the customer
purchases the Matrox product, this Limited Warranty Statement shall be deemed modified to be consistent with such
local law. Under such local law, certain limitations of this Limited Warranty Statement may not apply to the consumer.
3. To the extent allowed by local law, the remedies provided in this Limited Warranty Statement are the customer’s sole
and exclusive remedies.
C. Limitations of Liability
1. EXCEPT FOR THE OBLIGATIONS SPECIFICALLY SET FORTH IN THE LIMITED WARRANTY STATEMENT, IN NO
EVENT SHALL MATROX BE LIABLE FOR:
a. any direct, indirect, special, incidental, consequential, foreseeable or unforeseeable, or punitive damages, whether
based on contract, tort, delict or any other legal theory and whether advised of the possibility of such damages,
and/or
b. damages arising from the loss of use, data, production revenue and/or profit of in connection with the Matrox
product or any business interruption.
2. Without prejudice to the foregoing, any liability of Matrox for any breach of warranty shall be limited to the amount
paid by the customer for the defective hardware in question.
3. To the extent allowed by local law, Matrox’s entire liability and the customer’s exclusive remedy shall be the repair or
replacement of any defective product during the warranty period. Matrox does not offer any other warranty with
respect to Matrox hardware or software or any other hardware or software.
4. Customer shall be responsible for all applicable taxes, duties and customs fees on any replacement unit, as well as
all transport, insurance, storage and other charges incurred on all returned products.
D. Obtaining Service
1. Verify that your Matrox product was installed and configured according to the information in its accompanying
documentation.
2. Read the “Troubleshooting” information included with the Matrox product to see if you can solve the problem yourself.
3. If you are still experiencing difficulties, please contact your dealer where you purchased your Matrox product.
4. If you must return a Matrox product, leave the configuration as it was when you were using it, and leave all
identification stickers on the product. Pack the product in its original box and return to your Matrox dealer where the
product was purchased, together with your proof of purchase. Your Matrox dealer will return the product for you.
Alternatively, if this first option is unavailable to you, you may contact the Matrox Technical Support group who will
issue a Return Merchandise Authorization (RMA) number, upon receipt of adequate proof of purchase, and inform
you of shipping instructions. DO NOT RETURN THE PRODUCT TO MATROX WITHOUT MATROX’S RMA NUMBER
AND EXPRESS AUTHORIZATION.
E. General
This limited warranty shall be governed by the laws of the Province of Quebec, Canada and the federal laws of Canada
applicable therein and the courts of the Province of Quebec shall have exclusive jurisdiction to hear and decide any
dispute instituted by the customer in connection with this limited warranty; the customer waives, by accepting the
product, its rights to institute proceedings in connection with this warranty against Matrox in any jurisdiction other than
Quebec.
26 Matrox TripleHead2Go – User Guide
Software license agreement
Single User Products This Matrox software (the “Software”) is copyrighted by Matrox Graphics Inc. All rights are
reserved. The purchaser is granted a license to use the software only, subject to the following restrictions and limitations:
1. The license is for the original purchaser only, and is not transferable without written permission of Matrox.
2. The original purchaser may use the Software on a single computer owned or leased by the original purchaser. You
may not use the Software on more than a single computer, even if you own or lease more than one computer, without
written consent of Matrox.
3. The original purchaser may make back-up copies of the Software for his or her own use only, subject to the use
limitations of this license.
4. The original purchaser may not engage in, nor permit third parties to engage in, any of the following:
•
Providing or disclosing the Software to third parties.
•
Providing use of the Software in a computer service business, network, time-sharing, multiple CPU or multi-user
arrangement to users who are not individually licensed by Matrox.
•
Making alterations or copies of any kind in the Software (except as specifically permitted above).
•
Attempting to unassemble, de-compile or reverse engineer the Software in any way.
•
Granting sublicenses, leases, or other rights in the Software to others.
•
Making copies, or verbal or media translations, of the user’s guide.
•
Making telecommunication data transmissions of the Software.
Matrox reserves the right to terminate this license if there is a violation of its term or default by the Original Purchaser.
Upon termination, for any reason, all copies of the Software must be immediately returned to Matrox, and the Original
Purchaser shall be liable to Matrox for any and all damages suffered as a result of the violation or default.
Limited warranty
Matrox warrants to you, for a period of 90 days normal use from your date of purchase, that:
1. The CD/disks on which the software is furnished and the documentation are not defective.
2. The Software is properly recorded upon the CD/disks included.
3. The documentation is substantially complete and contains all the information Matrox deems necessary to use the
software.
4. The Software functions substantially as described in the documentation.
Matrox’s entire liability and your exclusive remedy shall be the replacement of any CD/Disks or documentation not
meeting these warranties, which is returned to Matrox or an authorized dealer, together with a copy of your paid receipt.
The above is the only warranty of any kind, either express or implied, including, but not limited to the implied warranties
of merchantability and fitness for a particular use that is made by Matrox on this Licensed Software. In no event shall
Matrox be liable to you or to any third party for consequential, special, indirect or incidental damages which you may
incur as a result of using the licensed software, including, but not limited to, loss of data, or information of any kind which
you may experience.
Matrox TripleHead2Go – User Guide 27
Index
A
Adobe Reader
20
Monitor
Connection setup
Settings 20
C
13
23, 25–26
D
PDF
Display
Modes 21
Settings 13
DualHead
10
Technical assistance
TripleHead
20
23
2, 8
14–20
U
20
Power indicator
PowerDesk
7
T
P
14–15
Power supply
Connection
Desktop management
13, 16
Troubleshooting
Connection setup
Analog Edition 4–6
Digital Edition 7–12
Customer support
4–6, 7–12
21
Multi-display
CD-ROM, Matrox
Digital
Stretched mode
M
6, 14
13, 24
Product
Information
USB
Cable 10, 12, 14
Powered port 10, 12, 14
W
21–22
4, 7
25–26
Web, Matrox 23
Warning
Warranty
S
Software setup
28 Matrox TripleHead2Go – User Guide
13
Thank you for choosing Matrox
Please register online (http://www.matrox.com/graphics/registration) to be eligible
for customer support, new product announcements, and information on special offers
and upcoming events.
USA
FCC Compliance Statement
Remark for the Matrox hardware products supported by this guide This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between
the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected • Consult the dealer or an experienced radio/TV technician for help.
WARNING Changes or modifications to this unit not expressly approved by the party responsible for the compliance
could void the user’s authority to operate this equipment. The use of shielded cables for connection of the monitor to
the card is required to meet FCC requirements.
Declaration of conformity of a Class B digital device according to the FCC rules
We, the Responsible Party Matrox, 625 State Route 3, Unit B, Plattsburg, NY 12901 • Telephone: (514) 822-6000
(extension 2026) • Attention: Conformity Group Matrox
Declaration The Matrox hardware products supported by this guide comply with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) these devices may not cause harmful interference, and (2) these devices
must accept any interference received, including interference that may cause undesired operation. Any question
regarding this declaration should be forwarded to the above coordinates.
CANADA
(English) Industry Canada Compliance Statement
Remark for the Matrox hardware products supported by this guide These digital devices do not exceed the Class
B limits for radio noise emission from digital devices set out in the Radio Interference Regulation of Industry Canada.
(Français) Conformité avec les exigences du ministère de l’Industrie Canada
Remarque sur les produits matériels Matrox couverts par ce guide Ces appareils numériques n’émettent aucun
bruit radioélectrique dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le
Règlement sur le brouillage radioélectrique édicté par Industrie Canada.
JAPAN
VCCI Compliance Statement
Remark for the Matrox hardware products supported by this guide This is a Class B product based on
the standard of the Voluntary Control Council for Interference from Information Technology Equipment
(VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install
and use the equipment according to the instruction manual.
USA
(English) FDA (Food and Drug Administration) requirements for Laser Products
Remark for the Matrox hardware products supported by this guide
Product compliant to 21CFR Subpart J Class 1.
This product includes a 850 nm Laser
EUROPE
(English) European user’s information – Declaration of Conformity
Remark for the Matrox hardware products supported by this guide These devices comply with EC
Directive 89/336/EEC for a Class B digital device. They have been tested and found to comply with
EN55022/CISPR22 and EN55024/CISPR24. In a domestic environment these products may cause radio interference in
which case the user may be required to take adequate measures. To meet EC requirements, shielded cables must be
used to connect the monitor and other peripherals to the card. These products have been tested in a typical class B
compliant host system. It is assumed that these products will also achieve compliance in any class B compliant system.
(Français) Informations aux utilisateurs Européens – Déclaration de conformité
Remarque sur les produits matériels Matrox couverts par ce guide Ces unités sont conformes à la directive
communautaire 89/336/EEC pour les unités numériques de classe B. Les tests effectués ont prouvé qu’elles sont
conformes aux normes EN55022/CISPR22 et EN55024/CISPR24. Le fonctionnement de ces produits dans un
environnement résidentiel peut causer des interférences radio, dans ce cas l’utilisateur peut être amené à prendre les
mesures appropriées. Pour respecter les impératifs communautaires, les câbles de connexion entre le moniteur ou
autres périphériques et la carte doivent être blindés. Ces produits ont été testés dans un système hôte typique
compatible classe B. On suppose qu’ils présenteront la même compatibilité dans tout système compatible classe B.
(Deutsch) Information für europäische Anwender – Konformitätserklärung
Anmerkung für die Matrox Hardware-Produktunterstützung durch dieses Handbuch Diese Geräte entsprechen
EC Direktive 89/336/EEC für ein digitales Gerät Klasse B. Sie wurden getestet und entsprechen demnach
EN55022/CISPR22 und EN55024/CISPR24. In einer Wohnumgebung können diese Produkte Funkinterferenzen
erzeugen, und der Benutzer kann genötigt sein, entsprechende Maßnahmen zu ergreifen. Um EG-Anforderungen zu
entsprechen, müssen zum Anschließen des Monitors und anderer Peripheriegeräte an die Karte abgeschirmte Kabel
verwendet werden. Diese Produkt wurden in einem typischen, der Klasse B entsprechenden, Host-System getestet. Es
wird davon ausgegangen, daß diese Produkte auch in jedem Klasse B entsprechenden System entsprechend
funktionieren.
(Italiano) Informazioni per gli utenti europei – Dichiarazione di conformità
Nota per i prodotti hardware Matrox supportati da questa guida Questi dispositivi sono conformi alla direttiva
CEE 89/336/EEC relativamente ai dispositivi digitali di Classe B. Sono stati provati e sono risultati conformi alle norme
EN55022/CISPR22 e EN55024/CISPR24. In un ambiente domestico, questi prodotti possono causare radiointerferenze,
nel qual caso all’utente potrebbe venire richiesto di prendere le misure adeguate. Per soddisfare i requisiti CEE, il monitor
e le altre periferiche vanno collegati alla scheda grafica con cavi schermati. Questi prodotti sono stati provati in un tipico
sistema host conforme alla classe B. Inoltre, si dà per scontato che questi prodotti acquisiranno la conformità in
qualsiasi sistema conforme alla classe B.
(Español) Información para usuarios europeos – Declaración de conformidad
Observación referente a los productos de hardware de Matrox apoyados por este manual Estos dispositivos
cumplen con la directiva de la CE 89/336/EEC para dispositivos digitales de Clase B. Dichos dispositivos han sido
sometidos a prueba y se ha comprobado que cumplen con las normas EN55022/CISPR22 y EN55024/CISPR24. En
entornos residenciales, estos productos pueden causar interferencias en las comunicaciones por radio; en tal caso el
usuario deberá adoptar las medidas adecuadas. Para satisfacer las disposiciones de la CE, deberán utilizarse cables
apantallados para conectar el monitor y demás periféricos a la tarjeta. Estos productos han sido sometidos a prueba en
un típico sistema anfitrión que responde a los requisitos de la clase B. Se supone que estos productos cumplirán
también con las normas en cualquier sistema que responda a los requisitos de la clase B.
EUROPE
(English) European user’s information – Directive on Waste Electrical and
Electronic Equipment (WEEE)
Please refer to the Matrox Web site (www.matrox.com/environment/weee) for recycling information.
(Français) Informations aux utilisateurs Européens – Règlementation des
déchets d’équipements électriques et électroniques (DEEE)
Se référer au site Web de Matrox (www.matrox.com/environment/weee) pour l’information concernant le recyclage.
(Deutsch) Information für europäische Anwender – Europäische Regelungen zu Elektround Elektronikaltgeräten (WEEE)
Bitte wenden Sie sich an der Matrox-Website (www.matrox.com/environment/weee) für Recycling-Informationen.
(Italiano) Informazioni per gli utenti europei – Direttiva sui rifiuti di apparecchiature
elettriche ed elettroniche (RAEE)
Si prega di riferirsi al sito Web Matrox (www.matrox.com/environment/weee) per le informazioni di riciclaggio.
FRANCE
Avertissement sur l’épilepsie
À lire avant toute utilisation d’un jeu vidéo par vous-même ou votre enfant Certaines personnes sont
susceptibles de faire des crises d’épilepsie ou d’avoir des pertes de conscience à la vue de certains types de lumières
clignotantes ou d’éléments fréquents dans notre environnement quotidien. Ces personnes s’exposent à des crises
lorsqu’elles regardent certaines images télévisées ou qu’elles jouent à certains jeux vidéo. Ces phénomènes peuvent
apparaître alors même que le sujet n’a pas d’antécédent médical ou n’a jamais été confronté à une crise d’épilepsie.
Si vous-même ou un membre de votre famille avez déjà présenté des symptômes liés à l’épilepsie (crise ou perte de
conscience) en présence de stimulations lumineuses, veuillez consulter votre médecin avant toute utilisation.
Nous conseillons aux parents d’être attentifs à leurs enfants lorsqu’ils jouent avec des jeux vidéo. Si vous-même ou votre
enfant présentez un des symptômes suivants: vertige, trouble de la vision, contraction des yeux ou des muscles, perte
de conscience, trouble de l’orientation, mouvement involontaire ou convulsion, veuillez immédiatement cesser de jouer
et consultez un médecin.
Précautions à prendre dans tous les cas pour l’utilisation d’un jeu vidéo • Ne vous tenez pas trop près de
l’écran. • Jouez à bonne distance de l’écran de TV et aussi loin que le permet le cordon de raccordement. • Utilisez de
préférence les jeux de vidéo sur un écran de petite taille. • Évitez de jouer si vous êtes fatigué ou si vous manquez de
sommeil. • Assurez-vous que vous jouez dans une pièce bien éclairée. • En cours d’utilisation, faites des pauses de dix
à quinze minutes toutes les heures.
Copyright © 2008 Matrox Graphics Inc. • (English) All rights reserved. • (Français) Tous droits réservés. • (Deutsch) Alle
Rechte vorbehalten. • (Italiano) Tutti i diritti riservati. • (Español) Reservados todos los derechos.
Trademarks • Marques déposées • Warenzeichen • Marchi registrati •
Marcas registradas
Matrox Electronic Systems Ltd. /
Matrox Graphics Inc.................................................. Matrox®, DualHead®, CenterWINDOW™, DVDMax™,
GigaColor™, ASM™, ATC™, AuroraVX3mp™, AuroraVX™,
DualHead2Go™, EpicA™, Equinox™, Extio™, G400™, G450™,
G550™, Marvel™, MED2mp™, MED2mp-DVI™, MED3mp-DVI™,
MED4mp™, MED5mp-DVI™, MED5mp™, Millennium™, MMS™,
Multi-Monitor Series™, MultiDesk™, P650™, P650™ Low-profile,
P690™, P750™, Parhelia™, Parhelia™ APVe, Parhelia-512™,
Parhelia-LX™, Parhelia HR256™, PJ4OLP™, PowerDesk™,
PowerSpace™, QID™, Quad Information Display™, RAD™, Quick
Connect™, MaxVIEW™, MGA™, MGA-G100™, MGA-G200™,
Onyx™, PixelTOUCH™, PrecisionCAD™, Precision SGT™,
QuickDesk™, RAD2mp™, RAD3mp™, RAD9mp™, RAD PCI™,
RAD PCIe™, RADQ2mp™, Rainbow Runner®, SonoVUE™,
SPECTRUM™, TheatreVUE™, TripleHead™, TripleHead2Go™
Adobe Systems Inc. ................................................. Acrobat®, Reader®
Apple Computer, Inc. ............................................... Apple®, Mac®, Mac OS®
Dolby Laboratories, Inc. ............................................ Dolby®, Dolby Digital®
Intel Corporation ....................................................... Intel®, Pentium®
International Business Machines Corporation .......... IBM®, VGA®
Macrovision Corporation........................................... Macrovision™
Microsoft Corporation ............................................... Aero™, Direct3D®, DirectDraw®, DirectShow™, DirectX™,
Microsoft®, MS-DOS®, PowerPoint®, Windows®, Windows NT®,
Windows Server®, Windows Vista™
Silicon Graphics, Inc. ................................................OpenGL®
Silicon Image, Inc. ..................................................... PanelLink™
U.S. Environmental Protection Agency ..................... Energy Star™
• (English) Registered trademarks are registered in the United States, Canada, and/or other countries. All other nationally
and internationally recognized trademarks and tradenames are hereby acknowledged. • (Français) Les marques
déposées sont déposées aux États-Unis, au Canada et/ou dans d’autres pays. Toutes les autres marques et tous les
autres noms déposés reconnus nationalement ou internationalement sont également reconnus par les présentes. •
(Deutsch) Die eingetragenen Warenzeichen sind in den USA, Kanada und/oder anderen Ländern registriert. Alle
sonstigen national und international bekannten Warenzeichen und Produktnamen werden hiermit anerkannt. • (Italiano)
I marchi registrati sono registrati negli Stati Uniti, in Canada e/o in altri paesi. Tutti gli altri marchi registrati e nomi
commerciali riconosciuti a livello nazionale e internazionale sono ugualmente riconosciuti qui. • (Español) Las marcas
registradas están registradas en los EE.UU., Canadá u otros países. Por medio del presente se reconocen todas las
demás marcas y nombres comerciales reconocidos a nivel nacional e internacional.
(English) Disclaimer
THE INFORMATION IN THIS GUIDE IS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT NOTICE.
Matrox Graphics Inc. reserves the right to make changes in specifications at any time and without notice. The
information provided by this document is believed to be accurate and reliable. However, no responsibility is assumed by
Matrox Graphics Inc. for its use; nor for any infringements of patents or other rights of third parties resulting from its use.
No license is granted under any patents or patent rights of Matrox Graphics Inc.
(Français) Responsabilité
LES INFORMATIONS CONTENUES DANS CE MANUEL PEUVENT ÊTRE MODIFIÉES À TOUT MOMENT SANS
PRÉAVIS.
Matrox Graphics Inc. se réserve le droit de modifier les spécifications à tout moment sans préavis. Les informations
contenues dans ce manuel sont reconnues comme étant précises et fiables. Cependant, Matrox Graphics Inc. n’assume
aucune responsabilité concernant leur utilisation, ni leur contrefaçon ou les autres droits des tiers résultant de leur
utilisation. Aucune licence n’est accordée sur aucun brevet ou droit d’exploiter un brevet de Matrox Graphics Inc.
(Deutsch) Haftungsablehnungserklärung
DIE IN DIESEM HANDBUCH ENTHALTENEN ANGABEN UND DATEN KÖNNEN OHNE VORHERIGE ANKÜNDIGUNG
GEÄNDERT WERDEN.
Die Matrox Graphics Inc. behält sich das Recht vor, jederzeit und ohne Ankündigung technische Daten zu ändern. Es
wird keine Garantie für die Richtigkeit des Inhalts dieses Handbuchs übernommen. Weiterhin übernimmt die Matrox
Graphics Inc. keinerlei Verantwortung für die Benutzung dieses Handbuchs, weder für Verstöße gegen Patentrechte
noch für andere Rechte Dritter, die aus seinem Gebrauch resultieren mögen. Es werden keinerlei Lizenzrechte gewährt
für sämtliche Patente oder Patentrechte der Matrox Graphics Inc.
(Italiano) Discrezionalità
LE INFORMAZIONI CONTENUTE NEL PRESENTE DOCUMENTO SONO SOGGETTE A MODIFICHE SENZA
PREAVVISO.
Matrox Graphics Inc. si riserva il diritto di apportare variazioni di qualunque tipo alle specifiche tecniche in qualunque
momento e senza alcun preavviso. Le informazioni contenute in questa documentazione sono ritenute corrette e
attendibili. In ogni caso, non è imputabile a Matrox Graphics Inc. nessuna responsabilità per il loro utilizzo, come
nessuna violazione a brevetti o diritti di altri produttori derivante dal loro utilizzo.
(Español) Renuncia
LA INFORMACION QUE CONTIENE EL PRESENTE MANUAL ESTA SUJETA A CAMBIOS SIN PREVIO AVISO EN
CUALQUIER MOMENTO.
Matrox Graphics Inc. se reserva el derecho de realizar modificaciones en cualquier momento y sin previo aviso. La
información facilitada en este documento se considera que es exacta y fiable. Sin embargo, Matrox Graphics Inc. no
asume ninguna responsabilidad por su uso; ni por cualquier infracción de patentes u otros derechos de terceras partes
derivados de su uso. No se concede ninguna licencia bajo cualesquiera patentes o derechos de patentes de Matrox
Graphics Inc.
Matrox Graphics Inc.
1055 Saint Regis Boulevard
Dorval, Quebec, Canada H9P 2T4
North America: 1-800-361-1408
International: (514) 822-6000
Email: graphics@matrox.com
Web site: www.matrox.com/graphics
Technical support:
www.matrox.com/graphics/support
To locate the sales office nearest you, visit
www.matrox.com/graphics/contact