124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
1
(Nero quadricromia/Process Black pellicola)
WASHER-DRYER
ZJD 1285
PROGRAMMES
E X C E L
T U R B O D RY
B U I LT
124973311
1 2 0 0
IN
HEAVY
SOIL
RINSE
650 rpm
SENSOR
QUICK
WASH
RINSE
HOLD PLUS
ON-OFF
INJECTION
INSTRUCTION BOOKLET
GB
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
2
(Nero quadricromia/Process Black pellicola)
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should you move house and leave the appliance, always
ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of
the appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using
the appliance.
Installation
●
Before washing, ensure that all pockets are empty
and buttons and zips are fastened. Avoid washing
frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras
must NOT be machine washed.
●
This appliance is heavy. Care should be taken when
moving it.
●
It is dangerous to alter the specifications or attempt
to modify this product in any way.
●
●
All packing and transit bolts must be removed before
use. Serious damage can occur to the product and
to property if this is not adhered to. See relevant
section in instructions.
Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the
machine.
●
●
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
●
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Garments which have been in contact with volatile
petroleum products should not be machine washed.
If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the
garment before placing in the machine.
●
The users should always check that they have not
left their gas lighters (disposable or otherwise) in their
clothing.
●
Never tumble dry items that have had contact with
chemicals such as dry cleaning fluid.These are of a
volatile nature and could cause an explosion.
Only tumble dry items which have been washed in
water or require airing.
●
Plastic detergent dispensers should not remain in the
drum during the drying cycle, as the plastic used is
not designed to withstand the heat. If you wish to
wash-through-to-dry you should use the
conventional detergent dispenser drawer.
●
Wash small items such as socks, laces, washable
belts etc in a washing bag or pillow case as it is
possible for such items to slip down between the tub
and the inner drum.
●
Only use the advised quantities of fabric softener.
Damage to the fabric can ensue if you over-fill. Refer
to the manufacturer’s recommendations of
quantities.
●
As some duvets and eiderdowns should be
washed/dried in large commercial machines because
of their bulk, please check with the manufacturer of
the item before washing in a domestic machine.
●
Leave the porthole door slightly ajar between washes
to preserve the door seal.
●
Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning. Contact your local Zanussi Service
Force Centre. Always insist on genuine Zanussi
spare parts.
●
●
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely.
Child Safety
●
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the
controls or play with the product.
●
Pets and children have been known to climb into
washer-dryers. Please check your drum before use.
●
The glass door becomes very hot during the washing
and drying cycle. Keep children away from the
vicinity of the appliance whilst it is in operation.
●
Keep all packaging well away from children.
●
Keep all detergents in a safe place out of children’s
reach.
Use
●
Always unplug the appliance and turn off the water
supply after use.
●
Do not overload the appliance. See relevant section
in the instruction book.
●
Only wash and dry fabrics which are designed to be
machine washed and dried. If in doubt, consult the
care label on the clothes.
2
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
3
(Nero quadricromia/Process Black pellicola)
Contents
For the User
Washing Hints
●
Which detergent?....
And in which form?
12-13
13
13
Important Safety Information
2
●
Your New Washer-Dryer
4
Drying Hints
14
Description of the Appliance
5
Wash Care Symbols
15
●
5
5
Washing Programmes
6
Drying Programmes
●
Door locked pilot light
Detergent dispenser drawer
The Control Panel
Operating sequence
●
●
●
●
Maintenance and Cleaning
7-10
16-17
18
19-20
Washing 4.5 kg of withe cotton at 95°C
Load the laundry
Measure out the detergent
Measure out the fabric softener
Select the required option(s)
Select the required programme
Start the machine
At the end of the programme
7
7
7
7
7
7
8
8
●
Washing 2 kg of mixed fabrics at 50°C
Load the laundry
Measure out the detergent
Measure out the fabric softener
Select the required option(s)
Select the required programme
Start the machine
At the end of the programme
8
8
8
8
9
9
9
9
Something Not Working
21-22
Service and Spare Parts
22
Zanussi Guarantee Conditions
23
Drying 2.25 kg of cotton
Load the laundry
Select the programme
Select the required time
Start the machine
At the end of the programme
10
10
10
10
10
10
Autodrying 1 kg of mixed fabrics
Load the laundry
Measure out the detergent and fabric softener
Select the programme
Select the required option
Select the required time
Start the machine
At the end of the programme
11
11
11
11
11
11
11
11
●
●
●
●
●
●
●
Descaling
After each wash
External cleaning
Cleaning the dispenser drawer
Cleaning the drawer recess
Cleaning the filter
The dangers of freezing
Maintenance Wash
Zanussi Service Force
19
19
19
19
19
19
20
20
24-25
For the Installer
Installation Instructions
Technical Specifications
●
●
●
●
●
●
●
●
●
Unpacking
Positioning
Water inlet
Water drainage
Levelling
Special conditions
In the interest of the environment
Electrical connection
Building-in
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
26
26
27
27
27-28
28
29
29
29
30
31-32
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
4
(Nero quadricromia/Process Black pellicola)
Your New Washer-Dryer
Your new washer-dryer, fitted with the Zanussi “JET SYSTEM”, meets all modern requirements for effective
treatment of laundry with low water, energy and detergent consumption.
Even small loads are washed “economically” because the amount of water used is regulated automatically according
to the load and type of fabric.
●
Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
In the interest of the environment
●
Materials marked with the symbol
recyclable.
●
Check with your local Council or Environmental
Health Office to see if there are facilities in your area
for re-cycling this appliance.
●
When the appliance is to be scrapped, cut off the
power supply cable and make the door lock device
unusable to prevent young children from being
trapped inside.
To save water and energy and help protect the
environment, we recommend that you follow these
hints:
●
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
●
The machine works more economically if it is fully
loaded (for both washing and drying cycles).
How do we help to protect the environment? We
use recycled paper!
●
Adjust the quantity of detergent according to the
hardness of your water supply, the amount of
laundry and the degree of soiling.
●
A programme without prewash is sufficient for
normally soiled laundry.
●
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
●
Select a “quick” programme for lightly soiled
laundry.
●
The machine will consume less energy if the laundry
is adequately spun before being dried.
●
The special wool programme with its new delicate
wash system treats your woollens with extreme
care.
●
The drying programmes will enable you to have
dry and soft laundry in a short time.
Ecological hints
are
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.
If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not
evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary
to redistribute the wash load manually and select a spin programme. For more detailed information see the
section headed "Something Not Working".
4
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
5
(Nero quadricromia/Process Black pellicola)
Description of the Appliance
1 Detergent dispenser drawer
1
34
5 67
8
2 Programme guide
3 “Drying indicator” light
PROGRAMMES
E X C E L
4 Drying time selector dial
T U R B O D RY
5 “Option” buttons
B U I LT
HEAVY
SOIL
1 2 0 0
IN
R I N S E
650 rpm
S E N S O R
QUICK
WASH
RINSE
HOLD PLUS
ON-OFF
I N J E C T I O N
2
6 ON/OFF button
7 “Mains-on” light
9
10
8 Programme selector dial
9 Door locked pilot light
10 Door opening handle
11 Filter
12 Adjustable feet
11
12
Door locked pilot light
The door stays locked throughout the wash cycle.
Locking is indicated by a pilot light located next to the
door handle. The door cannot be opened until the pilot
light has gone out.
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
Programme chart
P0239S
5
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
6
(Nero quadricromia/Process Black pellicola)
The Control Panel
PROGRAMMES
E X C E L
T U R B O D RY
B U I LT
DRYING TIME
HEAVY
SOIL
1 2 0 0
IN
1
RINSE
2
3
650 rpm
SENSOR
QUICK
WASH
RINSE
HOLD PLUS
ON-OFF
4 5 6 7 8 9
1 Detergent dispenser drawer
ZJD
INJECTION
n
1285
10
6 Quick wash button
By depressing this button on programmes B, C, D and
H the wash time is reduced.
This is suitable only for garments which are lightly
soiled.
2 Drying indicator light
This light illuminates when the machine is drying.
3 Drying time selector dial
7 Rinse Hold Plus button
Push the dial to pop it out. Graduated up to 120 mins
for cottons and synthetics, this dial allows you to select
the desired drying time according to the type and
quantity of laundry and the required degree of dryness:
Press this button to make the machine stop with water in
the drum after the cotton, synthetic or delicate wash
cycles.
This prevents any creasing which may occur if the
clothes are left damp in the drum. When it is convenient
for you to empty the machine, simply press this button
again so that the machine can proceed to drain and spin,
or turn the dial to the drain programme “S”.
If this button is not activated, the washing programmes
will end with a spin.
Do not press this button for woollens: wool items should
be gently spun.
Important! The Rinse Hold option is not compatible with
the automatic Washing & Drying programme.
- Blue sector for cottons
- Green sector for synthetics
Turn the dial clockwise only.
Cooling phase
To allow the laundry to cool down, a cooling phase
starts automatically 10 minutes before the end of
drying and this phase must in no circumstances be
reduced or interrupted.
4 Heavy soil button
By pressing this button, the machine will take in cold
water only on programmes with a water temperature of
50, 60 °C and 95 °C (programmes B-C-H).
These would normally be hot and cold.
The water is then gradually heated to the required
temperature.
The effect is to improve the overall wash performance,
particularly on biological stains such as egg, blood and
grass stains, and heavily soiled fabrics, since the longer
«cool-soak» phase as the water heats up provides the
right conditions for the powder and the water
temperature to interact, and achieve the best possible
results.
8 On/Off button
5 Spin speed reduction button
10 Programme selector dial
By depressing this button the spin speed will be
reduced as follows:
- cotton/linen: from 1200 to 650 rpm;
- synthetics/mixed fabrics/delicates: from 650 to
450 rpm
- wool: from 1000 to 650 rpm.
Push the dial to pop it out.
Turn the dial clockwise to select the required
programme.
By depressing this button the machine starts
operating.
When depressed again, the machine stops.
The push button is provided with a child-proof safety
lock. Move the small slider placed in the middle of the
button downwards to lock the button in the «off»
position.
9 Mains-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
Before setting the dial to any position the machine
must be switched off by depressing the ON/OFF
button again.
6
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
7
(Nero quadricromia/Process Black pellicola)
Operating Sequence
3. Measure out the fabric softener
Before the first wash, we recommend that you run a
cotton cycle at 60°C, without any laundry in the
machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
Washing 4.5 kg of white cotton
at 95°C
Suppose you have 4.5 kg of normally dirty laundry to
wash. It is white cotton and is suitable for high
temperature washing.
P0005
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
4. Select the required option(s)
Depress HEAVY SOIL and/or SPIN REDUCTION and/or
QUICK WASH and/or RINSE HOLD PLUS button, if
required.
HEAVY
SOIL
650 rpm
QUICK
WASH
RINSE
HOLD PLUS
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and
pour it into the main wash compartment
.
If you wish to carry out the prewash, pour detergent
into the compartment marked
.
5. Select the required programme
Turn the programme selector dial clockwise to the
programme B or A if you wish to perform the prewash
before wash.
B
P0129
P0006
7
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
8
(Nero quadricromia/Process Black pellicola)
Washing 2 kg of mixed fabrics
at 50°C
6. Start the machine
Before starting up the machine check that:
● the appliance is plugged in
●
the water supply taps are turned on
●
the drain hose is correctly and securely positioned
Suppose you have 2 kg of Mixed fabrics to wash. They
are rather delicate fabrics and should not be washed at
a high temperature.
●
the door and the detergent dispenser drawer are
closed.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
Depress the ON/OFF button: the mains-on light and
door locked light will illuminate and the machine starts
operating.
P0471
P0004
2. Measure out the detergent
7. At the end of the programme
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and
pour it into the main wash compartment
.
If you wish to carry out the prewash, pour detergent
into the compartment marked
.
The machine stops automatically.
If you have depressed the RINSE HOLD PLUS button,
the machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water and
spin, release the same button. To drain only, select
programme “S”.
The door is controlled by a safety device which
releases 2 minutes after the end of the programme.
The door can only be opened when the door locked
light is off.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
P0006
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
3. Measure out the fabric softener
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
P0005
8
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
9
(Nero quadricromia/Process Black pellicola)
4. Select the required option(s)
7. At the end of the programme
Depress HEAVY SOIL and/or SPIN REDUCTION and/or
QUICK WASH and/or RINSE HOLD PLUS button, if
required.
The machine stops automatically.
HEAVY
SOIL
QUICK
WASH
650 rpm
If you have depressed the RINSE HOLD PLUS button,
the machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water and
spin, release the same button. To drain only, select
programme “S”.
RINSE
HOLD PLUS
The door is controlled by a safety device which
releases 2 minutes after the end of the programme.
The door can only be opened when the door locked
light is off.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light goes out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
5. Select the required programme
Turn the programme selector dial clockwise to the
programme H or A if you wish to perform the prewash
before wash.
H
P0791
6. Start the machine
Before starting up the machine check that:
● the appliance is plugged in
●
the water supply taps are turned on
●
the drain hose is correctly and securely positioned
●
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light and
door locked light will illuminate and the machine starts
operating.
P0471
9
124973311 ZJD1285.qxd
9/22/00
12:11 PM
Pagina
10
(Nero quadricromia/Process Black pellicola)
Drying 2.25 kg of cotton
4. Start the machine
You have for example just machine-washed and spun
at 1200 rpm 4.5 kg (10 lb) of laundry.
They are cotton fabrics of medium weight which do not
need ironing.
Switch off the machine.
Then remove the laundry from the appliance and divide
the items to obtain two loads of approx. 2.25 kg (5 lb)
each.
Depress the ON/OFF button, the mains-on light, door
locked light and drying light will illuminate and the
machine starts operating.
1. Load the laundry
Open the door by pulling the door handle outwards.
Load the items one at a time and close the door.
P0471
5. At the end of the programme
The machine stops automatically and the drying light
goes out.
The door is controlled by a safety device which
releases 2 minutes after the end of the programme.
The door can be opened after the door locked light has
gone out.
Switch the machine off by depressing the ON/OFF
button again, the mains-on light goes out.
P0004
2. Select the programme
If the laundry is still too damp, select a further brief
drying time, bearing in mind that during the last 10
minutes the appliance carries out a cooling and
anticrease phase.
Turn the programme selector dial clockwise to
programme G.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
G
P0673
3. Select the required time
Following indications given in the programme chart on
page 18, turn the time selector dial clockwise to the 90
mins setting in the blue sector.
90
120
M0031
10
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
11
(Nero quadricromia/Process Black pellicola)
Autodrying 1 kg of mixed fabrics
6. Start the machine
You intend to wash and dry automatically 1 kg (2.2 lb)
of mixed fabrics which you want to iron as soon as
they are dry.
Proceed as follows:
Depress the ON/OFF button: the mains-on light and
door locked light come on and the machine starts
operating.
1. Load the laundry
Open the door by pulling the door handle outwards.
Load the items one at a time and close the door.
2. Measure out the detergent and
fabric softener
P0471
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and
pour it into the main wash compartment
.
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
“MAX” mark in the drawer).
Close the drawer gently.
7. At the end of the programme
3. Select the programme
Switch the machine off by depressing the ON/OFF
button again, the mains-on light goes out.
The machine stops automatically and the drying
light goes out.
The door is controlled by a safety device which
releases 2 minutes after the end of the programme.
The door can be opened after the door locked light has
gone out.
Turn the programme selector dial clockwise to
programme H.
If the laundry is still too damp, select a further brief
drying time, bearing in mind that during the last 10
minutes the appliance carries out a cooling and
anticrease phase.
H
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
P0791
4. Select the required option
Depress QUICK WASH and/or HEAVY SOIL button, if
required.
5. Select the required time
Following indications given in the programme chart on
page 18, turn the time selector dial clockwise to the
50 mins setting in the green sector.
60
90
M0031S
11
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
12
(Nero quadricromia/Process Black pellicola)
Washing Hints
Do NOT overload the machine. Weigh the laundry the
first few times you use the appliance.
●
Bleach is very corrosive; it should be used with care
and kept out of reach of children.
The average weights of the most common items are
listed below as a guide:
●
Some stains such as fruit, wine, grass, rust etc. are
difficult to remove and should be treated before
washing with specific products, which can be found
in most household shops. In some cases it may
help to soak the stain before washing with a special
pre-soak product or biological detergent.
●
Only wool marked “Pure New Wool - washable,
preshrunk” can be washed in the machine using the
wool programme; other types of wool should be
washed by hand or dry cleaned.
●
If you have used the machine to wash, rinse or spin
only non-colour fast garments, there may be dye left
in the sump. To ensure any subsequent wash is not
contaminated with the dye, select and carry out a
rinse and spin programme, without any garments, to
ensure that any dye is removed from the sump.
●
Once you have finished using the machine, you are
advised to unplug it and turn off the water taps.
1000 g = 1 kg
Sheet
700-1000 g
Pillow case
100-200 g
Tablecloth
400-500 g
Serviette
50-100 g
Tea towel
70-120 g
Linen hand towel
100-150 g
Towelling hand towel
150-250 g
Towelling bath towel
700-1000 g
Bath robe
1000-1500 g
Man’s shirt
200-300 g
Apron
150-200 g
●
Load the laundry loosely alternating large items with
small ones.
●
Sort the laundry according to the type of fabric,
colour-fastness and how dirty it is.
●
Avoid washing unhemmed or torn items as they
may unravel.
●
Before washing, empty all pockets of small objects
which may have been left inside (coins, keys,
screws etc), as these could damage the drain
pump.
●
When washing curtains, remove the hooks.
●
Close poppers and zips and fasten loose buttons.
●
It is essential to wash new coloured items
separately when washing for the first time.
●
When washing fabrics requiring different wash
temperatures together, always select the lowest
temperature.
●
White items should not be washed with coloured
items.
●
Very small items (handkerchiefs, ribbons, socks etc)
should be washed in a washing bag or a pillow
case.
●
Use a good quality detergent suitable for automatic
washing machines.
●
Use the correct quantities of detergent.
●
For wool, use gentle detergent only in small
quantities.
«JETSYSTEM» wash
As the Jetsystem is flexible and adjusts water intake
according to wash load size it is not possible to give
you exact recommendations as to the amount of
detergent that should be used for any one wash.
Therefore we recommend that you use approximately
1/3 less than the detergent manufacturer recommends
on the packet or bottle, making the appropriate
allowances for soft or hard water, and light or heavy
soilage of clothes. If you have judged the amount
correctly you should expect to see a soft sudsy liquid
during the wash. It is not necessary to have a head of
lather on the water.
12
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
13
(Nero quadricromia/Process Black pellicola)
Which detergent?....
And in which form?
To ensure you obtain the best wash results from your
appliance, it is important to use the right detergent in
your everyday wash, and only detergents
recommended for use in automatic machines.
To maintain the appearance of your clothes and
household textiles and to make them last longer you
should use different types of detergent for different
washes, whether for whites, colours or delicates.
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
Traditional Powders
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
Traditional Liquids
Whites
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol
,
start the machine immediately upon placing the
detergent in the dispenser drawer.
Alternatively the detergent is measured into the
specially designed dosing device* which should be
placed on top of the laundry, and at the back of the
machine drum.
We recommend the Ariel product
range which is biological and
designed to provide excellent
cleaning and stain removal even
at low temperatures.
Non Biological
If you prefer to use a non
biological detergent, which does
not contain enzymes we
recommend Fairy. Fairy provides
good cleaning and stain removal.
Compact Powders and Liquids
Compact detergents (or concentrates as they are also
known) are available in liquid or powder form, and
generally require a smaller dosage. Follow the
manufacturer’s instructions to ensure the most
economical usage. Pour the detergent directly into the
dispenser drawer, or alternatively measure the
detergent into the specially designed dosing device*
which should be placed on top of the laundry, and at
the back of the machine drum.
Coloureds
For coloured items you should use a
detergent which is designed to clean
while maintaining the original colour.
Ariel Color does not contain bleach
and therefore helps to preserve
colours.
*
If you use a dosing device in a washer-dryer,
please ensure the dosing device/ball is removed
before carrying out a drying programme.
Delicate Items
Fabric Conditioners
When washing delicates such as
woollens, you should use a product
which is specially designed to care for
fine fabrics.
Dreft Automatic is suitable for woollens
and other delicates.
These are ideal for improving “softness”, and also
reduce static cling on synthetics and make ironing
easier. They are available in two types:
For example Lenor liquid fabric
softener, for use in the washing
machine/washer dryer. The
liquid fabric softener should be
poured into the compartment
marked with the symbol
.
Follow the manufacturer’s dosage
instructions and never exceed the
MAX level.
Laundry Bleach
For additional stain removal you may
wish to use a product such as Ace
Gentle Bleach which is used in addition
to your chosen detergent. Ace is
suitable for all washable fabrics
including silks, woollens and coloureds.
Bounce conditioning sheets for use
in a tumble dryer. We recommend
the conditioning sheets are pinned
(using a safety pin) to an article
of laundry and placed in the
tumble dryer.
13
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
14
(Nero quadricromia/Process Black pellicola)
Drying hints
Duration of the drying cycle
As a dryer, the machine works on the condensation
principle.
Therefore, the water taps must be open and the
drain hose must drain water into a sink or into the
drain pipe, even during the drying cycle.
The drying time can vary according to
Load
Sort of laundry
max. load
(dry weight)
Linen and cottons
2.25 kg
Synthetics
1.5 kg
●
the final spin speed,
●
the required degree of drying,
●
the type of laundry
●
the size of load.
The usual drying times are indicated in the programme
chart. As you become more familiar with the appliance,
you will discover the drying times that best suit your
needs according to the various type of fabric. It is a
good idea to make a note of these times.
The following are the degrees of final drying which can
be selected for cotton and synthetics:
Warning:
Loads of washed laundry exceeding these values
must be divided before being dried, otherwise poor
results will be obtained.
-
Store dry
-
Iron dry
When selecting the drying time you should remember
that it includes a 10 minute cooling phase.
Garments not suitable for drying
Additional drying
●
Particularly delicate items such as synthetic
curtains, woollen and silk, garments with metal
inserts, nylon stockings, bulky garments such as
anoraks, bedcovers, quilts, sleeping bags and
duvets must not be machine dried.
Should the laundry still be too wet at the end of the
programme, set another short drying time.
Warning! To prevent the formation of creases or
shrinking of fabrics, avoid excessive drying.
●
Garments padded with foam-rubber or materials
similar to foam-rubber must not be machine dried;
they represent a fire hazard.
Fibre residue
●
Also, fabrics containing residues of setting lotions or
hair sprays, nail solvents or similar solutions must
not be machine dried in order to avoid the formation
of harmful vapours.
After drying fluffy fabrics, such as new towels, it is
advisable to perform the rinse programme P to be sure
that any residue that may remain in the tub is
completely removed and does not stick to garments
dried afterwards.
After each drying cycle the filter should be checked and
cleaned if necessary.
Drying symbols on garment labels
Always look at the garment label to check whether
garments can be machine dried.
The following symbols refer to drying:
Machine drying is usually possible
Normal drying (normal temperature)
Gentle drying (reduced temperature)
Do not machine dry
14
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
15
(Nero quadricromia/Process Black pellicola)
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
WASH ACTION
95
Normal (Maximum)
White Cotton or Linen
without Special Finishes
60
Normal (Maximum)
Cotton, Linen or Viscose
without Special Finishes
Colourfast at 60°C.
50
Reduced (Medium)
Nylon, Polyester/Cotton, Viscose
with Special Finishes,
Cotton/Acrylic Mix.
40
Normal (Maximum)
Cotton, Linen or Viscose
Colourfast at 40°C but not 60°C.
40
Reduced (Medium)
Acrylics, Acetate, Triacetate, Wool
mixes, Polyester/wool blends.
40
Much Reduced (Minimum)
Hand wash only
FABRIC
Wool, wool mixtures, Silks
Do not machine wash
BLEACHING
Chlorine bleach may be used
IRONING
Hot iron
Cotton, Linen, Viscose
Warm iron
Polyester mixtures, Wool
Cool iron
Acrylic, Nylon, Polyester
DRY CLEANING
May be dry cleaned. Other letters and/or a bar beneath the circle will
indicate the required process to the dry cleaner.
TUMBLE DRYING
with high heat setting
with low heat setting
May be tumble dried
X
A cross through any symbol means «DO NOT»
Important Notes
machine prematurely.
When using liquid detergent and a prewash
programme, place the detergent into the correct
compartment in the dispenser drawer, after the
prewash has finished.
For best results, always use the dispenser drawer for
dispensing detergents and liquid additives.
Once the dispenser has been filled, close it by pushing
it in gently. This is particularly important if you are using
fabric conditioner to avoid the conditioner entering the
15
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
16
(Nero quadricromia/Process Black pellicola)
Washing Programmes
Programmes for cotton and linen
Max.
load
Progr.
time
mins.
Prewash at 40 °C
Short spin at 650 rpm
4.5 kg
18
B
Wash at 95 °C
3 rinses
Long spin
4.5 kg
105
C(*)
Wash at 60 °C
3 rinses
Long spin
4.5 kg
105
Non fast coloured
cotton or linen fabrics,
shirts, blouses,
underwear.
D
Wash at 40 °C
3 rinses
Long spin
4.5 kg
88
Separate spin for
cotton and linen items
F
Long spin
4.5 kg
10
Degree of soil
and type of laundry
Programme
dial position
Description
PREWASH
For heavy soiled cotton
items (whites and
coloureds).
A
BOILWASH
White cotton, for
example normally soiled
work garments, sheets,
household linen,
underwear, towels.
FAST
COLOUREDS
Fast coloured cotton or
linen fabrics, shirts,
underwear, towels.
NON- FAST
COLOUREDS
Wash programme
SPIN 1200 rpm
Possible
options
(*) This programme at 60°C is the reference programme for the Energy label according to EEC Directive 92/75.
Water filling: 30°-40° programmes: cold water filling
50°-60°-95° programmes: hot and cold filling
The programme times are intended as a guide only. The actual time will vary depending on incoming water
temperature and pressure.
16
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
17
(Nero quadricromia/Process Black pellicola)
Washing Programmes
Programmes for synthetics, delicates and wool
Max.
load
Progr.
time
mins.
Prewash at 40 °C
Short spin at 650 rpm
2 kg
15
H
Wash at 50 °C
3 rinses
Short spin
2 kg
70
Underwear, no-iron
shirts, blouses
J
Wash at 40 °C
3 rinses
Short spin
2 kg
40
Lightly soiled synthetic
or delicate items
K
Wash at 30 °C
3 rinses
Short spin
2 kg
40
Specially tested
programme for wool
garments bearing the
“Pure new wool, nonshrink, machine
washable” label.
M
Wash at 40 °C
3 rinses
Short spin
1 kg
60
Delicate fabrics, for
example curtains
N
Wash at 40 °C
3 rinses
Short spin
2 kg
48
HAND RINSES
Separate rinse cycle for
hand washed garments
P
3 rinses
Short spin
2 kg
23
FRESHEN UP
This programme can
be used for softening
hand washed
garments.
Q
1 rinse, with fabric
softener, if required
Short spin
2 kg
10
SHORT SPIN
Separate spin for
synthetics and
delicates
R
Draining of water
and short spin
2 kg
5
DRAIN
For emptying out the
last rinse water in
programmes with the
Rinse Hold Plus option.
S
Draining of water
-
1
Degree of soil
and type of laundry
Programme
dial position
Heavy soiled synthetics
or mixed fabrics, not
wool
A
MIXED
FABRICS
Synthetic or mixed
fabrics, underwear,
coloured garments,
non-shrink shirts,
blouses.
MIXED
FABRICS
Wash programme
PREWASH
30° WORN ONCE
WOOL
DELICATES
17
Description
Possible
options
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
18
(Nero quadricromia/Process Black pellicola)
Drying Programmes
Programme
Degree of
drying
G
Cotton &
linen
L
Store dry (*)
for items which
you want to put
away without
ironing
Mixed
fabrics,
synthetics
Type of fabric
Bathrobes, bath
towels, terry towels,
knitwear, babywear
Max. load
Spin speed
Drying time
mins.
2.25 kg
1200 rpm
90
1 kg
1200 rpm
50
1.5 kg
650 rpm
900 rpm (**)
120
90
1 kg
650 rpm
900 rpm (**)
80
60
2.25 kg
1200 rpm
70
1 kg
1200 rpm
40
1.5 kg
650 rpm
900 rpm (**)
100
70
1 kg
650 rpm
900 rpm (**)
60
50
Shirts, blouses,
outerwear
G
Sheets, tablecloths,
table napkins etc.
Cotton &
linen
Iron dry
for items which
need ironing
L
Mixed
fabrics,
synthetics
Household linen,
shirts, blouses
(*) This programme for cotton items is the reference programme for the Energy label according to the EEC Directive
92/75.
(**) If you perform the automatic Washing & Drying Programme for mixed fabrics/synthetics the final spin will be
900 rpm instead of 650 rpm.
18
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
19
(Nero quadricromia/Process Black pellicola)
Maintenance and Cleaning
Cleaning the filter
Before any maintenance or cleaning is carried out you
must DISCONNECT the appliance from the electricity
supply.
The water drain filter
A clean filter is important for the correct functioning of
the machine, and should therefore be cleaned after
every washing and drying programme.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturer's
instructions. This will help to prevent the formation of
lime deposits.
Place a container under the filter to catch any spillage.
If the filter is blocked and the machine is unable to
drain you will need to drain the water manually from the
machine at this stage. To do this, unhook the drain
hose from the standpipe or sink and hold the end of the
hose over a bowl on the floor. The water should drain
by gravity into the bowl. When the bowl is full, hook the
hose back up and empty the bowl. Repeat the
procedure until water stops flowing out.
Unscrew and remove the filter.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the
appliance. Keeping the door open after a wash will also
help to preserve the door seal.
External cleaning
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
P0037
Cleaning the dispenser drawer
P0039
Clean carefully under a fast running tap.
From time to time the washing powder and additive
dispenser drawer should be cleaned.
Remove the drawer by pressing the catch downwards
and by pulling it out. Flush it out under a tap, to remove
any traces of accumulated powder.
P0040
P0010
Warning
When the appliance is in use and depending on the
programme selected there can be hot water in the filter.
Never remove the filter during a wash cycle, always
wait until the appliance has finished the cycle, and is
empty. When replacing the filter, ensure it is securely
retightened so as to stop leaks and young children
being able to remove it.
P0009
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme
without any clothes in the drum.
P0038
19
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
20
(Nero quadricromia/Process Black pellicola)
The water inlet filters
If your water is very hard or contains traces of lime
deposit, the water inlet filters may become clogged.
It is therefore a good idea to clean them from time to
time.
Turn off the water taps. Unscrew the water inlet hoses.
Clean the filters using a hard bristle brush.
Tighten up the inlet hoses.
P1090
The dangers of freezing
If the machine is exposed to temperatures below 0°C,
certain precautions should be taken.
●
Turn off the water taps.
●
Unscrew the inlet hoses.
●
Unhook the drain hose from the rear support and
position the end of this hose and that of the inlet
hoses in a bowl. Run the draining programme.
●
Disconnect the appliance.
●
Screw the inlet hoses and reposition the drain hose.
●
When you intend to start the machine up again,
make sure that the room temperature is above 0°C.
Maintenance Wash
With the use of low temperature washes it is possible
to get a build up of residues inside the drum.
We recommend that a maintenance wash be
performed on a regular basis.
To run a maintenance wash:
●
The drum should be empty of laundry.
●
Select the hottest cotton wash programme.
●
Use a normal measure of detergent, must be a
powder (such as Ariel Futur).
20
124973311 ZJD1285.qxd
9/22/00
12:12 PM
Pagina
21
(Nero quadricromia/Process Black pellicola)
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
Symptom
Possible causes
The machine does not start
●
●
●
●
●
●
The machine does not fill
●
●
●
●
The machine fills then empties
immediately
●
●
●
The machine does not empty and/or
does not spin
●
●
●
●
●
●
There is water on the floor
●
●
●
●
●
Unsatisfactory washing results
●
●
●
●
The machine vibrates when spinning
●
●
●
●
●
The door has not been closed.
The plug is not properly inserted in the power socket.
There is no current at the socket
The main fuse or the fuse in the plug has blown.
The selector dial is not correctly positioned.
The ON/OFF button has not been depressed.
Ensure the water taps are open.
The filters in the inlet hoses are blocked.
The inlet hoses may be squashed or kinked.
The door has not been closed.
The end of the drain hose is too low.
The end of the drain hose is submerged in water.
There is no vent in the end of the drain hose.
The drain hose may be squashed or kinked.
The RINSE HOLD option has been selected.
The drain filter may be blocked.
The drain hose extension is not correct. Follow the instructions for
connecting to the waste.
The drainage system pipes are blocked.
The wash load is unbalanced: redistribute the clothes inside the drum
to allow the machine to spin.
Too much detergent or unsuitable detergent has been used (creates
too much foam).
Check whether there are any leaks from one of the inlet hose(s) fittings.
It is not always easy to see this as the water runs down the hose;
check to see if it is damp.
The drain hose may be damaged or not securely positioned.
The detergent dispenser drawer or recess is clogged.
The drainage system pipes are blocked.
Too little detergent or unsuitable detergent has been used. An
insufficient amount of detergent leaves the laundry looking grey and
causes lime scale to form.
Stubborn stains have not been treated prior to washing
The correct wash programme has not been selected.
Too much laundry has been placed in the drum.
The internal packing has not been removed.
The machine is in contact with the wall or furniture.
The machine is not level.
The washing load is badly distributed in the drum.
Maybe there is very little laundry in the drum.
21
124973311 ZJD1285.qxd
9/22/00
1:32 PM
Pagina
22
(Nero quadricromia/Process Black pellicola)
Symptom
Possible causes
The door will not open
●
●
●
The programme is still running.
The door lock has not yet released (door pilot light on).
There is water in the tub
Spinning starts late or the machine
does not spin
●
The electronic unbalance detection device has cut in because the
laundry is not evenly distributed in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can
resume. If, after 10 minutes, the laundry is still not evenly distributed in
the drum, the machine will not spin. In this case, redistribute the load
manually and reselect the spin programme.
The machine makes an unusual
noise
●
The machine is fitted with a type of motor which makes an unusual
noise compared with other traditional motors. This new motor ensures
a softer start and more even distribution of the laundry in the drum
when spinning, as well as increased stability of the machine.
No water is visible in the drum
●
Machines based on modern technology operate very economically
using very little water without affecting performance.
The machine does not dry or does
not dry properly
●
The drying time has not been selected
The water taps are not turned on
The drain filter is clogged
The machine is overloaded
The selected drying time or sector are not suitable for the laundry
●
●
●
●
Service & Spare Parts
Customer Care
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Zanussi Service Force Centre by telephoning:
For general enquiries concerning your Zanussi
appliance or for further information on Zanussi
products, please contact our Customer Care
Department by letter or telephone as follows:
0870 5 929929
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
The addresses are listed on the following pages.
Before calling out an engineer, please ensure you have
read the details under the heading “Something Not
Working”.
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance (found
on the rating plate - see picture).
5. The purchase date
Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel 08705 727727*
or visit our website at www.zanussi.co.uk
* calls to this number may be recorded for training
purposes.
Mod. ..........
Prod. No. ...........
Ser. No. .........
Mod. ..........
Prod. No. ...........
P0042
Ser. No. .........
22
124973311 ZJD1285.qxd
9/22/00
1:32 PM
Pagina
23
(Nero quadricromia/Process Black pellicola)
Zanussi Guarantee Conditions
Standard guarantee conditions
Exclusions
We, Zanussi undertake that if, within 24 months of the
date of the purchase, this Zanussi appliance or any part
thereof is proved to be defective by reason only of
faulty workmanship or materials, we will, at our option,
repair or replace the same FREE OF ANY CHARGE for
labour, materials or carriage on condition that:
This guarantee does not cover:
●
●
●
●
Damage or calls resulting from transportation,
improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
●
The appliance has been correctly installed and used
only on the electricity supply stated on the rating
plate.
Costs incurred for calls to put right an appliance
which is improperly installed or calls to appliances
outside the United Kingdom.
●
The appliance has been used for normal domestic
purposes only, and in accordance with the
manufacturer’s instructions.
Appliances found to be in use within a commercial
environment, plus those which are subject to rental
agreements.
●
Products of Zanussi manufacture which are NOT
marketed by Zanussi.
●
This guarantee does not cover freestanding
appliances which have a 12 months guarantee.
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
All service work under this guarantee must be
undertaken by a Zanussi Service Force Centre.
European guarantee
Any appliance or defective part replaced shall become
the Company’s property.
If you should move to another country within Europe
then your guarantee moves with you to your new home
subject to the following qualifications:
● The guarantee starts from the date you first
purchased your product.
This guarantee is in addition to your statutory and other
legal rights.
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside these
hours in which case a premium will be charged.
●
The guarantee is for the same period and to the
same extent for labour and parts as exists in the
new country of use for this brand or range of
products.
●
The guarantee relates to you and cannot be
transferred to another user.
●
Your new home is within the European Community
(EC) or European Free Trade Area.
●
The product is installed and used in accordance
with our instructions and is only used domestically,
i.e. a normal household.
●
The product is installed taking into account
regulations in your new country.
Before you move please contact your nearest
Customer Care Centre, listed below, to give them
details of your new home. They will then ensure that the
local Service Organisation is aware of your move and
able to look after you and your appliances.
23
France
Senlis
+33 (0)344 62 29 99
Germany
Nurnberg
+49 (0)911 323 2600
Italy
Pordenone
+39 (0)1678 47053
Sweden
Stockholm
+46 (0)8 738 79 50
UK
Slough
+44 (0)1753 219897
124973311 ZJD1285.qxd
9/22/00
1:30 PM
Pagina
24
(Nero quadricromia/Process Black pellicola)
Zanussi Service Force
To contact your local Zanussi Service Force Centre telephone 08705
CHANNEL ISLANDS
GUERNSEY
Guernsey Electricity
PO Box 4
Vale, Guernsey
Channel Islands
JERSEY
Jersey Electricity Company
PO Box 45
Queens Road
St Helier
Jersey
Channel Islands JE4 8NY
ORKNEY
(M65)
Corsie Domestics
7 King Street
Kirkwall
Orkney KW15
PERTH
Hydro Electrical
Inveralmond House
Ruthervenfield Road
Perth PH1 3AQ
PERTH
Graham Begg
Unit 4
Airport Ind Estate
Wick KW1 4QS
(OWN SALES)
SHETLAND
SCOTLAND
ABERDEEN
(M05)
54 Claremont Street
Aberdeen AB10 6RA
AUCHTERMUCHY
(M03)
33a Burnside
Auchtermuchy
Fife KY14 7AJ
BLANTYRE
(M07)
Unit 5
Block 2
Auchenraith Ind. Estate
Rosendale Way
Blantyre G72 0NJ
DUMFRIES
(M01)
93 Irish Street
Dumfries
Scotland DG1 2 PQ
DUNOON
(M67)
Brair Hill
7 Hill Street
Dunoon
Argyll PA23 7AL
GLASGOW
(M04)
20 Cunningham Road
Clyde Estate
Rutherglen
Glasgow G73 1PP
INVERNESS
(M06)
Unit 3B
Smithton Ind. Estate
Smithton
Inverness IV1 AJ
ISLE OF ARRAN
Arran Domestics
Unit 4 The Douglas Centre
Brodick
Isle of Arran KA27 8AJ
(OWN SALES)
ISLE OF BARRA
(OWN SALES)
ISLES OF BUTE
ISLE OF LEWIS
KELSO
(M08)
J Zerfah
244 Bruernish
Isle of Barra
Western Islands HS9 5QY
Walker Engineering
Glenmhor
Upper Serpentine Road
Rothesay
Isle of Bute PA20 9EH
ND Macleod
16 James Street
Stornoway
Isle of Lewis PA87 2QW
2-8 Wood Market
Kelso
Borders TD5 7AX
(OWN SALES)
SHETLAND
(OWN SALES)
WHALSAY
(OWN SALES)
Tait Electronic Systems Ltd
Holmsgarth Road
Lerwick
Shetland ZE1 0PW
Bolts Shetland Ltd.
26 North Road
Lerwick
Shetland ZE1 0PE
Leask Electrical
Harisdale
Symbister, Whalsay
Shetland ZE2 9AA
NORTH EAST
GATESHEAD
(M39)
Unit 356a
Dukesway Court
Dukesway
Team Valley
Gateshead NE11 0BH
GRIMSBY
(M42)
15 Hainton Avenue
Grimsby
South Humberside
DN32 9AS
HULL
(M41)
Unit 1
Boulevard Industrial Estate
Hull
HU3 4AY
LEEDS
(M37)
64-66 Cross Gates Road
Leeds
LS15 7NN
NEWTON AYCLIFFE Unit 16
(M45)
Gurney Way
Aycliffe Industrial Estate
Newton Aycliffe
DL5 6UJ
SHEFFIELD
(M38)
NORTHERN IRELAND
BELFAST
(M27)
Owenmore House
Kilwee Business Park
Upper Dunmury Lane
Belfast
BT17 0HD
WALES
CARDIFF
(M28)
Guardian Industrial Estate
Clydesmuir Road
Tremorfa
Cardiff
CF2 2QS
CLYWD
(M14)
Unit 6-7 Coed – Parc
Abergele Road
Rhuddlan
Clwyd
Wales
LL18 5UG
DYFED
(M77)
HAVERFORDWEST
(M75)
OSWESTRY
(M17)
Maes Y Coed
High Mead
Llanybydder
Carmarthenshire
SA40 9UL
Cromlech Lodge
Ambleston
Haverfordwest
Pembrokeshire
SA62 5DS
Plas Ffynnon
Warehouse
Middleton Road
Oswestry
SY11 2PP
24
929 929
Pennine House
Roman Ridge Ind.
Roman Ridge Road
Sheffield S9 1GB
NORTH WEST
BIRKENHEAD
(M11)
1 Kelvin Park
Dock Road
Birkenhead
L41 1LT
CARLISLE
(M10)
Unit 7
James Street Workshops
James Street
Carlisle
Cumbria
CA2 5AH
ISLE OF MAN
(M64)
South Quay Ind. Estate
Douglas
Isle of Man
IM1 5AT
LIVERPOOL
(M15)
Unit 1
Honeys Green Precinct
Honeys Green Lane
Liverpool
L12 9JH
MANCHESTER
(M09)
Unit B
Central Industrial Estate
St Marks Street
Bolton
BL3 6NR
PRESTON
(M13)
Unit 250
Dawson Place
Walton Summit
Bamber Bridge
Preston
Lancashire PR5 8AL
STOCKPORT
(M16)
Unit 20 Haigh Park
Haigh Avenue
Stockport
SK4 1QR
124973311 ZJD1285.qxd
9/22/00
1:30 PM
Pagina
25
(Nero quadricromia/Process Black pellicola)
Zanussi Service Force
To contact your local Zanussi Service Force Centre telephone 08705
LONDON & EAST ANGLIA
MIDLANDS
BIRMINGHAM
(M18)
66 Birch Road East
Wyrley Road Ind. Estate
Witton
Birmingham
B6 6DB
BOURNE
(M44)
Manning Road Ind. Estate
Pinfold Road
Bourne
PE10 9HT
BRIDGNORTH
(M72)
68 St. Mary’s Street
Bridgnorth
Shropshire
WV16 4DR
11a Gardener Ind. Estate
Kent House Lane
Beckenham
Kent BR3 1QZ
CHELMSFORD
(M47)
Hanbury Road
Widford Ind. Estate
Chelmsford
Essex
CM12 3AE
ASHFORD
(M58)
Unit 14
Capitol Park
Capitol Way
Colindale
London NW9 0EQ
Unit 2
Bridge Road Business Est.
Bridge Road
Ashford
Kent TN2 1BB
FLEET
(M59)
Unit 1
Redsfield Ind. Estate
Church Crookham
Fleet
Hampshire GU13 0RD
HAYWARDS
HEATH
(M55)
21-25 Bridge Road
Haywards Heath
Sussex RH16 1UA
COLINDALE
(M53)
101 Rycroft Street
Gloucester
GL1 4NB
HEREFORD
(M31)
Unit 3
Bank Buildings
Cattle market
Hareford
HE4 9HX
ENFIELD
(M49)
284 Alma Road
Enfield
London
EN3 7BB
HIGHAM FERRERS
(M51)
30 High Street
Higham Ferrers
Northants
NN10 8BB
GRAVESEND
(M57)
ILKESTON
(M43)
Unit 2
Furnace Road
Ilkeston DE7 5EP
Unit B4
Imperial Business Estate
Gravesend
Kent
DA11 0DL
HARPENDEN
(M46)
Unit 4
Riverside Estate
Coldharbour Lane
Harpenden
AL5 4UN
LETCHWORTH
(M50)
16-17 Woodside Ind. Estate
Works Road
Letchworth
Herts
SG6 1LA
LINCOLN
(M40)
NEWCASTLE
UNDER LYME
(M12)
REDDITCH
(M20)
TAMWORTH
(M19)
WORCESTER
(M73)
Unit 7
Oaks Ind. Estate
Coventry Road
Narborough
Leicestershire
LE0 5GF
ELTHAM
(M78)
194 Court Road
Mottingham
Eltham
London SE9 4EW
Unit 8
Stonefield Park
Clifton Street
Lincoln
LN5 8AA
LONDON
(M76)
18-21 Croft Road
Brampton Ind. Estate
Newcastle under Lyme
Staffordshire
ST5 0TW
2/4 Royal Lane
Yiewsley
West Drayton
Middlesex
UB7 8DL
MAIDENHEAD
(M60)
Reform Road
Maidenhead
Berkshire
SL6 8BY
MOLESEY
(M61)
10 Island Farm Avenue
West Molesey
Surrey
KT8 2UZ
Unit 3
Sterling Park
Claymore
Tamworth
B77 5DO
NEWBURY
(M24)
9 Pipers Court
Berkshire Drive
Thatcham
Berkshire
RG19 4ER
Units 1 & 2
Northbrook Close
Gregorys Mill Ind. Estate
Worcester
WR3 8BP
IPSWICH
(M48)
Unit 6C
Elton Park Business Centre
Hadleigh Road
Ipswich
IP2 0DD
NORWICH
(M52)
2b Trafalgar Street
Norwich
NR1 3HN
13 Thornhill Road
North Moons Moat
Redditch
Worcestershire
B98 9ND
Unit 1a
The Summit
Hanworth Road
Hanworth Ind. Estate
Sunbury on Thames
TW16 5D
BECKENHAM
(M79)
GLOUCESTER
(M23)
LEICESTER
(M22)
SUNBURY
(M63)
929 929
25
SOUTH EAST
SOUTH WEST
BARNSTAPLE
(M30)
Main Road
Fremington
Barnstaple
North Devon EX31 2NT
BOURNEMOUTH
(M26)
63-65 Curzon Road
Bournemouth
Dorset
BH1 4PW
BRIDGEWATER
(M35)
6 Hamp Ind. Estate
Bridgewater
Somerset TA6 3NT
BRISTOL
(M25)
11 Eldon Way
Eldonwall Trading
Bristol
Avon BS4 3QQ
EMSWORTH
(M33)
266 Main Road
Southbourne
Emsworth
PO10 8JL
ISLE OF WIGHT
(M34)
Unit 8
Enterprise Court
Ryde Business Park
Ryde
Isle of Wight PO33 1DB
NEWTON ABBOT
(M29)
Unit 2
Zealley Ind. Estate
Kingsteignton
Newton Abbot
S. Devon
TQ12 3TD
REDRUTH
(M36)
Unit 7D
Pool Ind. Estate
Wilson Way
Redruth
Cornwall TR15 3QW
124973311 ZJD1285.qxd
9/22/00
1:32 PM
Pagina
26
(Nero quadricromia/Process Black pellicola)
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a qualified
plumber or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
WATER PRESSURE
MAXIMUM RECOMMENDED LOAD
82 cm (32.3”)
60 cm (23.6”)
54 cm (21.2”)
230-240 V/50 Hz
2550 W (13A)
Minimum (hot)
Minimum
Maximum
Washing
Cotton, linen
Synthetics
Delicate fabrics
Wool
Drying
Cotton, linen
Synthetics
0.35 bar (3.5 N/cm2)
0.48 bar (4.8 N/cm2)
7.6 bar (76 N/cm2)
4.5 kg (10 lbs)
2 kg (4.5 lbs)
2 kg (4.5 lbs)
1 kg (2.2 lbs)
2.25 kg (5 lbs)
1.5 kg (3.3 lbs)
SPIN SPEED
Maximum
1200 rpm
CONSUMPTION DATA FOR WASHING
4.5 KG NORMALLY SOILED COTTON
ITEMS AT 60°C (PROGR. C) WITH COLD
WATER FILLING
Energy
Water
Time
1.10 kWh
53 litres
125 mins
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
26
124973311 ZJD1285.qxd
9/22/00
1:32 PM
Pagina
27
(Nero quadricromia/Process Black pellicola)
Unpacking
Set the machine upright and remove the two remaining
bolts from the back.
Pull out the three plastic spacers from the holes into
which the bolts were fitted.
Plug the open holes with the plugs which you will find
in the envelope containing the instruction booklet.
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all the packaging for re-use in
case the machine is to be transported again.
Using a spanner unscrew and remove the rear right
bolt. Lay the machine gently on its back, making sure
that the hoses are not squashed.
P0256
P0020
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not
impeded by carpets, rugs etc. Check that the machine
does not touch the wall or other kitchen units.
Never place cardboard, wood or similar materials under
the machine to compensate for any unevenness in the
floor.
P0255
Remove the polystyrene base and take off the bottom
panel by unscrewing the central screw. Carefully slide
out the right polythene bag.
P0457
Your new machine has been designed to be
permanently plumbed in to your home’s water supply
and drainage system. However, if this is not possible, it
may be connected to suitable existing taps with the
drain hose discharging into a sink.
The appliance has two inlet hoses, hot and cold, with
female 3/4” BSP thread connectors. If this connection
is not compatible with the plumbing of the existing
installation, a variety of connectors are available from
good hardware stores and plumbers merchants to suit
most domestic plumbing. Any alteration to your existing
plumbing must be carried out by a competent person,
or qualified plumber.
P0015
Repeat the operation for the left and central polythene
bags.
Re-fit the bottom panel using the 4 screws supplied
with the door hinges (in the plastic bag) and the
previously removed screw.
Water inlet
The inlets on the back of the appliance are colour
coded, blue for cold and red for hot.
Connect the hoses to taps with a 3/4” thread.
P0016
P0453
P1088
27
124973311 ZJD1285.qxd
9/22/00
1:32 PM
Pagina
28
(Nero quadricromia/Process Black pellicola)
If only a cold water supply is available, connect the two
hoses to a cold water outlet by means of a «Y»
connection piece.
The standpipe should have an internal diameter of
approximately 38mm (see diagram) thus ensuring there
is an air break between the drain hose and standpipe.
Installation should comply with local water authority
and building regulations’ requirements.
When discharging into a standpipe ensure that the top
of the curve in the hose end is no more than 90cm
(35.4'') and no less than 60cm (23.6'') above floor level.
The upright standpipe should have a minimum length
of 30cm (12'') from the bottom of the elbow to the top
of the pipe (see diagram).
Make sure that it is designed in such a way, that the
end of the drain hose cannot be covered with water.
The appliance must be given a separate cold water
supply and not be connected to a mixer tap, a single
outlet water heater or a booster pump. A minimum
water pressure of 0.48 bar is required for safe operation
of the appliance.
Min. 30 cm.(12")
If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system.
There should be a minimum distance of 5.02m
(161/2 ft) between the appliance’s inlet and the bottom
of the water storage tank.
There will be sufficient pressure for the hot water
supply, providing there is a minimun height of 2.74
metres (9 ft) between the bottom of the cold water
storage tank and the bottom of the hot water cylinder.
38 mm.(1/1 2") diameter
standpipe
P1040
Set the hoses correctly by loosening the ring nuts. After
positioning the inlet hoses, be sure to tighten the ring
nuts again to prevent leaks.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece
is available from your local Service Force Centre.
The joining piece must have an internal diameter of
18mm.
If you intend the drain hose to empty into a sink, make
sure that the sink is empty and the plug hole is not
blocked. Use the plastic “U-Piece” supplied.
P0021
Water drainage
This appliance is designed to be permanently plumbed
into your home's water supply and drainage system.
The appliance drain hose should hook into a standpipe,
the hook in the drain hose is formed using the plastic
“U-Piece” supplied.
P0022
Important
Before connecting up the machine to new pipework or
to pipework that has not been used for some time, run
off a reasonable amount of water to flush out any
debris that may have collected in the pipes.
Min.60 cm.
(23.6")
Max. 90 cm.(35.4")
3 pin
P1039
28
124973311 ZJD1285.qxd
9/22/00
1:32 PM
Pagina
29
(Nero quadricromia/Process Black pellicola)
Levelling
In the interest of the environment
Level the washing machine by raising or lowering the
feet. The feet may be tight to adjust as they incorporate
a self locking nut, but the machine MUST be level.
Washing machines and dishwashers should be
connected to the FOUL drainage system, the water will
then be taken to a sewage works for treatment before
being discharged safely into a river.
It is essential that these appliances are not connected
to the surface water drainage system as this water is
discharged directly into a river or stream and may
cause pollution.
If you require any further advice please contact your
local authority drainage department.
Any necessary adjustment can be made with a
spanner. Accurate levelling prevents vibration, noise
and displacement of the machine during operation.
P1051
Some vibration is inevitable, especially if mounted on a
wooden floor.
Sprung wooden floors are particularly susceptible to
vibration. For advice, consult a builder. If possible,
always place the machine on a solid floor.
SHOWER
SINK
TOILET
BATH
BIDET
Special conditions
WASHING
MACHINE
If the floor is carpeted or covered with crumbly or soft
material, insert a rigid support base under the feet to
prevent noise, vibration or displacement. The base
should protrude a few centimetres beyond the edges of
the machine.
DISHWASHER
RAINWATER
'RUN-OFF'
FOUL DRAIN
SURFACE WATER
DRAINS & SEWERS
Warning
UNTREATED
DISCHARGE
FOUL SEWERS
SEWAGE
TREATMENT
WORKS
TREATED
DISCHARGE
The machine should NOT be placed on deep pile
carpeting.
RIVER
P0987
Note
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
29
RIVER
124973311 ZJD1285.qxd
9/22/00
1:33 PM
Pagina
30
(Nero quadricromia/Process Black pellicola)
Electrical connection
WARNING:
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
A cut off plug inserted into a 13 amp socket
is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
Should the appliance power supply cable neeed to
be replaced, this should be carried out by our
Service Force Centre.
The manufacturer declines any liability should
this safety measure not be observed.
The power supply cable must be easily accessible
after installing the appliance.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance’s
rating plate. The rating plate is located at the top of the
rim of the open door.
Permanent connection
In the case of permanent connection it is necessary
that you install a double pole switch between the
appliance and the electricity supply (mains), with a
minimum gap of 3mm between the switch contacts
and of a type suitable for the required load in
compliance with the current electrical regulations.
Mod. ..........
Prod. No. ...........
Ser. No. .........
The switch must not break the yellow and green earth
cable at any point.
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
The appliance is supplied with a 13amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 13amp ASTA approved (BS1363 A) fuse
must be used.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
GREEN & YELLOW
13 A
E
N
L
BROWN
BLUE
P1041
CORD CLAMP
The wire coloured green and yellow must be connected
to the terminal marked with the letter «E» or by the
earth symbol
or coloured green and yellow.
The wire coloured blue must be connected to the
terminal «N» or coloured black.
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure
over the outer sheath.
30
1:33 PM
Pagina
31
(Nero quadricromia/Process Black pellicola)
Building-in
35 Ø 12.5-14 depth
16
-22
416
This appliance has been designed to be built into the
kitchen furniture.
The recess should have the dimensions shown in
picture A.
B
9/22/00
C
124973311 ZJD1285.qxd
600
600
570
120
176,5
416
818
595-
c) Mounting the door
Fix the hinges (1) to the machine by means of the M5x8
screws (3-Fig. B). The hinges can be adjusted to
compensate for possible uneven thickness of the door.
To align the door perfectly it is necessary to loosen the
screw (3-Fig. B), adjust the door and tighten the screw
again.
160
165
90
0
49
P0965
A
Preparation and assembly of the door
The machine is originally pre-arranged for the assembly
of a door opening from right to left.
In this case it is sufficient to screw in the hinges (1) and
the counter-magnet (6) provided with the appliance, at
the right level (Fig. B).
6
1
1
d) Counter-magnet (6)
The appliance is pre-arranged for a magnetic closure of
the door. To enable a correct operation of this device, it
is necessary to screw the counter-magnet (6) (steel disk
+ rubber ring) into the inner side of the door.
Its position must correspond to the magnet (4) on the
appliance (see picture D).
4
2
7
C
P0422S
195
1
54
8
598
min.
820 min
596
515
,5
22+1
5
6
3
P0982
23
4
B
a) Door
The dimensions of the door should be:
- width
595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the height of the
adjacent furniture's base.
D
P0984
If the door has to be opened from left to right, invert the
position of the plates (7), the magnet (4) and the plate
(5) (Fig. B and E). Mount the countermagnet (6) and the
hinges (1) as previously described.
b) Hinges
To mount the hinges it is necessary to drill two holes
(dia. 35 mm, depth 12.5-14 mm depending on the
depth of door furniture) on the inner side of the door.
The distance between the holes hobs fixing centres
must be 416 mm.
The distance (B) from upper edge of the door to the
centre of the hole depends on the adjacent furniture's
dimensions.
The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of
screws for wood (2-Fig. B) supplied with the appliance.
E
6
4
5
7
1
3
P0983
31
2
124973311 ZJD1285.qxd
9/22/00
1:33 PM
Pagina
32
(Nero quadricromia/Process Black pellicola)
Recommendations regarding the
construction and fitting of a base
when the installation requires an
integrated appliance to be raised
With the appliance installed adjust all four feet ensuring
the machine is stable, and a clearance of approximately
5 mm is left between the top of the machine and the
underside of the worktop.
A final check for stability should be carried out with the
machine on spin with a load, this will identify the need
for any further fine adjustment to the feet.
Where the appliance has been raised by mounting onto
a wooden base provided by the installer. The material
used to construct the base should have a non slip
surface, be water repellent and if possible be one solid
piece.
If it is not possible to use one solid piece, due to the
additional height required, ensure that any additional
strips of timber are glued and screwed to the underside
of the base (see Fig. F).
5 mm Hardwood strip
If required an additional door magnet, part number
1242394-00/3 and disc, part number 1242393-00/5 are
available from spare parts.
Additional pieces of
timber should run
from front to back
40 mm
100 mm
A strip of beading approximately 605 mm W, x 5 mm
H, x 25 mm D must be screwed down into the base
directly in front of the machine’s feet, this will provide
additional security.
600-605 mm
Front view
F
Drill four fixing holes see Fig. G
600-605 mm
490 mm
95 mm
50 mm
G
Front edge
Top view
Position the base into the recess with its front edge as
far forward as the adjoining plinth line will allow. The
reason for placing the base in this position is to
allow a small strip of beading to be fitted in front of
the appliance feet.
Fix the base firmly to the floor using four appropriate
countersunk screws (see Fig. H).
Hardwood strip
5 mm x 25 mm
5 X 25 X 605
490
600-605
H
32
124973311 ZJD1285.qxd
9/22/00
1:33 PM
Pagina
34
(Nero quadricromia/Process Black pellicola)
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners,
chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries
around the world.
© Electrolux Household Appliances Limited 2000
Z