American DJ Mega 24PRO Instruction manual

Mega 24PRO Introduction
Unpacking: Thank you for purchasing the Mega 24PRO by American
DJ®. Every Mega 24PRO has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are missing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without first contacting customer support.
Introduction: The Mega 24PRO is part of American DJ’s continuing
pursuit for creating high quality affordable intelligent LED fixtures. The
Mega 24PRO is a DMX intelligent LED color wash. This wash can be
used in a stand alone mode or connected in a Master/Slave configuration. The unit can also be controlled via DMX controller. This unit has
four operating modes: Color mode, Program mode, RGB mode and
DMX control mode.
Customer Support: American DJ® provides a toll free customer support line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
User Instructions
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact
American DJ®.
PLEASE recycle the shipping carton when ever possible.
1/11
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 2
Mega 24PRO General Instructions
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Mega 24PRO •
•
•
•
•
•
Features
Mulit-Colors (32 Colors to choose from)
4 Operating Modes
Electronic Dimming 0-100%
Built in Microphone
DMX-512 protocol
6 DMX Channel Modes: 3, 6, 7, 10, 12, or 16 DMX Channels
Mega 24PRO
Warranty Registration
The Mega 24PRO carries a 3 year (1095 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase
and warranty. You may also register your product online at www.
americandj.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
(R.A.) number. If the unit is under warranty you must provide a copy
of your proof of purchase invoice. Please contact American DJ® customer support for a R.A. number.
Mega 24PRO
Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 3
Mega 24PRO
Safety Precautions
•To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture
•Do not spill water or other liquids into or on to your unit.
•Be sure that the local power outlet match that of the required volt-
age for your unit.
•Do not attempt to operate this unit if the power cord hasbeen
frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal short.
•Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user serviceable parts inside.
•Never operate this unit when it’s cover is removed.
•Never plug this unit in to a dimmer pack
•Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
•Do not attempt to operate this unit, if it becomes damaged.
•This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
•During long periods of non-use, disconnect the unit’s main power.
•Always mount this unit in safe and stable matter.
•Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 3 for cleaning details.
•Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
•The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in performance.
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 4
Mega 24PRO
Set Up
Mega 24PRO
Power Supply: The American DJ® Mega 24PRO contains a electronic
ballast, which will auto sense the voltage when it is plugged into the
power source. With the electronic ballast you do not need to worry
about wall voltage, this unit can be plugged in anywhere.
SOUND
REMOTE
CONTROL
INPUT
INPUT
OUTPUT
DMX512
cables. Do not DMX+,DMX-,COMMON
use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield
conductor to come in contact with the XLR’s outer casing. Grounding
the shield could cause a short circuit and erratic behavior.
COMMON
REMOTE
CONTROL
INPUT
SOUND
2
3
3
DMX -
OUTPUT
1
DMX512 IN
3-PIN XLR
2
REMOTE
CONTROL
INPUT
SOUND
XLR Female Socket
2 Cold
2 Cold
1 Ground
3
1
2
Figure 2
INPUT
OUTPUT
Termination redu
avoids signal tra
and interference.
to connect a DMX
120 Ohm 1/4 W)
and PIN 3 (DMX
XLR Pin Configuration
Pin 1 = Ground
Pin 2 = Data Compliment (negative)
3 Hot
Figure 3
3 Hot
Pin 3 = Data True (positive)
POWER
POWER
Special Note: Line Termination. When longer runs of cable are
used, you may need to use a terminator on the last unit to avoid erratic
behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is connected between pins 2 and 3 of a male XLR connector (DATA + and
DATA -). This unit is inserted in the female XLR connector of the last
unit in your daisy chain to terminate the line. Using a cable terminator
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic
behavior.
Termination reduces signal errors and
3
1
2
DMX512 IN
3-PIN XLR
3
avoids signal transmission problems
and interference. It is always advisable
to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)
and PIN 3 (DMX +) of the last fixture.
1
2
Figure 4
5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR
connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures
may be implemented in a 3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 3-pin line a cable adaptor must be
used, these adaptors are readily available at most electric stores. The
chart below details a proper cable conversion.
3-Pin XLR to 5-Pin XLR Conversion
Conductor
3-Pin XLR Female (Out)
5-Pin XLR Male (In)
Ground/Shield
Pin 1
Pin 1
Data Compliment (- signal)
Pin 2
Pin 2
Data True (+ signal)
Pin 3
Figure 1
©American DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 5
INPUT
2
DMX +
3
XLR Male Socket
1 Ground
Data Cable (DMX Cable) Requirements (For DMX Operation):
COMMON
1
1
DMX512 OUT
3-PIN XLR
POWER
+
The Mega 24PRO can be a 3, 6, 7, 10, 12, or 16 DMX512
channel
The
OUT DMX unit.DMX
3-PIN XLR
DMX address is set on the rear panel of the Mega 24PRO. Your unitDMX
and
your DMX controller require a approved DMX-512 110 Ohm Data cable
for data input and data output (Figure 1). We recommend Accu-Cable
DMX cables. If you are making your own cables, be sure to use standard
110-120 Ohm shielded cable (This cable may be
purchased at almost all professional sound and
lighting stores). Your cables should be made with
a male and female XLR connector on either end
of the cable. Also remember that DMX cable must
be daisy chained and cannot be split.
POWER
Notice: Be sure to follow figures two and three when making your own
DMX-512: DMX is short for Digital Multiplex. This is a universal pro-
tocol used as a form of communication between intelligent fixtures
and controllers. A DMX controller sends DMX data instructions from
the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a DATA
“OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of
different manufactures to be linked together and operate from a single
controller, as long as all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, when using several
DMX fixtures try to use the shortest cable path possible. The order
in which fixtures are connected in a DMX line does not influence the
DMX512
DMX addressing. For example; a fixture assigned DMX+,DMX-,COMMON
a DMX
address of 1
may be placed anywhere in a DMX line, at the beginning, at the end,
or anywhere in the middle. When a fixture is assigned a DMX address
of 1, the DMX controller knows to send DATA assigned to address 1
to that unit, no matter where it is located in the DMX chain.
Set Up
POWER
©American
Pin 3
Not Used
Do Not Use
Not Used
Do Not Use
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 6
Mega 24PRO
Operating Instructions
Mega 24PRO
LED Display On/Off: To make the display stay ON all of the time
automatically.
press the MODE and UP buttons at the same time. To make the display turn OFF after 20 seconds, press the MODE and DOWN buttons
at the same time.
Color Mode:
Operating Modes:
You can use the Mega 24PRO in either a stand alone mode or a master/slave configuration, there are 7 modes to choose from:
• Color Mode - Select one of 32 different colors to remain static.
• Program Mode - In this mode you can choose 1 of 12 programs to run and also adjust the rate of speed.
• RGB mode - Control the intensity of all three colors adjusting the intensity to your desire to create you own desired color.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the Elation® Show Designer™.
Master-Slave Operation:
This function will allows you to link units together to run in a MasterSlave mode. In Master-Slave operation one unit will act as the controlling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the
unit. Use standard XLR microphone cables to link your units together. Remember that the Male XLR connector is the input and
the Female XLR connector is the output. The first unit in the chain (master) will use the female XLR connector only. The last unit in the chain will use the male XLR connector only. Note: You can also daisy chain the power cords, this can only be
done with 20 fixtures. After 20 you will need to use a new power outlet. They must be the same fixtures. DO NOT mix fixtures.
2. You will also have to link the power cords to each other, as you did with the XLR cables.
3. Using the Master unit, choose your desired mode or program and connect the “Slave” unit or units. The master and slave will sync
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 7
Operating Instructions
In this mode you can choose a desired color to remain static.
1. Plug the fixture in and press the MODE button until “ColMacro Macro XX” is displayed. “XX” = 0-32.
2. Press the UP or DOWN buttons to scroll through the preset colors and find your desired color.
Program Mode:
In this mode the Mega 24PRO will change through the different colors.
1. Plug the fixture in and press the MODE button until “ColProgr Progr XX” is displayed. “XX” = 01-12 & All. There are 12 different preset programs to choose from. You can also set it to “All” in which all 12 programs will run.
2. Press the UP or DOWN buttons to find your desired program.
3. When you have found your desired program press the MODE but-
ton, “ColSpeed Speed XX” should be displayed. In this menu you can adjust the running speed of the program, “XX” = 1-16. 1 is the slowest speed, 16 the fastest speed.
4. You can also run the program in sound active mode. Press the UP or DOWN buttons until “ColSpeed Speed so” is displayed. You are now running the program in Sound Active mode.
RGB Mode:
In this mode you can select either red, green, blue, or adjust the colors to make a deisred color, which will remain static. You can adjust
the intensity of each color to make your desired color.
1. Plug the fixture in and press the MODE button until either “ColSet Red”, “ColSet Green”, or “ColSet Blue” is displayed.
2. You can press the UP or DOWN buttons to adjust the intensity of the displayed color. When you have adjusted your desired color
press MODE to move to the next color.
DMX Mode:
There are six DMX Channel Modes to choose from: 3 Channels, 6
Channels, 7 Channels, 10 Channels, 12 Channels, and 16 Channels.
Operating through a DMX controller give the user the freedom to create their own programs tailored to their own individual needs.
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 8
Mega 24PRO
Operating Instructions
1. This function will allow you to control each individual fixture’s
traits with a Elation® DMX 512.
2. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX controller.
3. Press the MODE button until one of the DMX Channel modes is displayed in the LCD screen; i.e. “DMX-3CH DMX X”, X repre-
senting the address.
4. Press the UP or DOWN buttons to select your desired address. Once you have found your desired DMX address connect your DMX Controller.
5. Please see pages 10-15 for DMX values and traits.
Mega 24PRO
Mega 24PRO
Channel
Channel
1 - 255
RED
0% - 100%
1 - 255
GREEN
0% - 100%
1 - 255
BLUE
0% - 100%
1
2
3
1 - 255
RED
0% - 100%
1 - 255
GREEN
0% - 100%
1 - 255
BLUE
0% - 100%
0
1-7
8 - 15
16 - 23
24 - 31
32 - 39
40 - 47
48 - 55
56 - 63
64 - 71
72 - 79
80 - 87
88 - 95
96 - 103
104 - 111
112 - 119
120 - 127
128 - 135
136 - 143
144 - 151
152 - 159
160 - 167
168 - 175
176 - 183
COLOR MACROS
OFF
BASTARD AMBER
MEDIUM AMBER
PALE AMBER GOLD
GALLO GOLD
GOLDEN AMBER
LIGHT RED
MEDIUM RED
MEDIUM PINK
BROADWAY PINK
FOLLIES PINK
LIGHT LAVENDER
SPECIAL LAVENDER
LAVENDER
INDIGO
HEMSLEY BLUE
TIPTON BLUE
LIGHT STEEL BLUE
LIGHT SKY BLUE
SKY BLUE
BRILLIANT BLUE
LIGHT GREEN BLUE
BRIGHT BLUE
PRIMARY BLUE
3
4
DMX Values & Functions - 3 Channel Mode
Function
Function
2
Power Cord Daisy Chaining
Value
Value
1
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 10 fixtures maximum. After 10 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Mega 24PRO
DMX Values & Functions - 7 Channel Mode
7 Channel Mode is continued on the next page.
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 9
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 10
Mega 24PRO
Channel
DMX Values & Functions - 7 Channel Mode
Value
4
184 - 191
192 - 199
200 - 207
208 - 215
216 - 223
224 - 231
232 - 239
240 - 247
248 - 255
5
0 - 15
16 - 255
0 - 239
240 - 255
6
7
©American
0 - 18
19 - 37
38 - 56
57 - 75
76 - 94
95 - 113
114 - 132
133 - 151
152 - 170
171 - 189
190 - 208
209 - 227
228 - 246
247 - 255
1 - 255
Function
COLOR MACROS CONT.
CONGO BLUE
PALE YELLOW GREEN
MOSS GREEN
PRIMARY GREEN
DOUBLE CTB
FULL CTB
HALF CTB
DARK BLUE
WHITE
STROBING/PROGRAM SPEED
STROBING
OFF
SLOW - FAST
PROGRAM SPEED
SLOW - FAST
SOUND ACTIVE
PROGRAMS
OFF
PROGRAM 1
PROGRAM 2
PROGRAM 3
PROGRAM 4
PROGRAM 5
PROGRAM 6
PROGRAM 7
PROGRAM 8
PROGRAM 9
PROGRAM 10
PROGRAM 11
PROGRAM 12
ALL PROGRAMS
MASTER DIMMER 0% - 100%
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 11
Mega 24PRO
Channel
DMX Values & Functions - 6 Channel Mode
Value
Function
1 - 255
RED 1
0% - 100%
1 - 255
GREEN 1
0% - 100%
1 - 255
BLUE 1
0% - 100%
1 - 255
RED 2
0% - 100%
1 - 255
GREEN 2
0% - 100%
1 - 255
BLUE 2
0% - 100%
1
2
3
4
5
6
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 12
Mega 24PRO DMX Values & Functions - 10 Channel Mode
Channel
Value
1
1 - 255
2
1 - 255
3
1 - 255
4
1 - 255
5
1 - 255
6
7
1 - 255
1 - 255
Function
RED 1
0% - 100%
GREEN 1
0% - 100%
BLUE 1
0% - 100%
RED 2
0% - 100%
GREEN 2
0% - 100%
BLUE 2
0% - 100%
COLOR MACROS
PLEASE SEE CH. 4 IN 7 CH. MODE
8
0 - 15
16 - 255
0 - 239
240 - 255
9
STROBING/PROGRAM SPEED
STROBING
OFF
SLOW - FAST
PROGRAM SPEED
SLOW - FAST
SOUND ACTIVE
PROGRAMS
PLEASE SEE CH. 6 IN 7 CH. MODE
Mega 24PRO DMX Values & Functions - 12 Channel Mode
Channel
1
1 - 255
2
1 - 255
3
1 - 255
4
1 - 255
5
1 - 255
6
1 - 255
7
1 - 255
8
1 - 255
9
1 - 255
10
1 - 255
11
1 - 255
12
1 - 255
10
1 - 255
MASTER DIMMER 0% - 100
When using Channels 1-7, Channel 8 will control Strobing.
When using Channel 9, Channel 8 will control Program Speed.
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 13
Value
©American
Function
RED 1
0% - 100%
GREEN 1
0% - 100%
BLUE 1
0% - 100%
RED 2
0% - 100%
GREEN 2
0% - 100%
BLUE 2
0% - 100%
RED 3
0% - 100%
GREEN 3
0% - 100%
BLUE 3
0% - 100%
RED 4
0% - 100%
GREEN 4
0% - 100%
BLUE 4
0% - 100%
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 14
Mega 24PRO DMX Values & Functions - 16 Channel Mode
Channel
Value
1
1 - 255
2
1 - 255
3
1 - 255
4
1 - 255
5
1 - 255
6
1 - 255
7
1 - 255
8
1 - 255
9
1 - 255
10
1 - 255
11
1 - 255
12
13
1 - 255
1 - 255
14
0 - 15
16 - 255
0 - 239
240 - 255
15
16
©American
1 - 255
Function
RED 1
0% - 100%
GREEN 1
0% - 100%
BLUE 1
0% - 100%
RED 2
0% - 100%
GREEN 2
0% - 100%
BLUE 2
0% - 100%
RED 3
0% - 100%
GREEN 3
0% - 100%
BLUE 3
0% - 100%
RED 4
0% - 100%
GREEN 4
0% - 100%
BLUE 4
0% - 100%
COLOR MACROS
PLEASE SEE CH. 4 IN 7 CH. MODE
STROBING/PROGRAM SPEED
STROBING
OFF
SLOW - FAST
PROGRAM SPEED
SLOW - FAST
SOUND ACTIVE
PROGRAMS
PLEASE SEE CH. 6 IN 7 CH. MODE
MASTER DIMMER 0% - 10
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 15
Mega 24PRO
COLOR
BASTARD AMBER
MEDIUM AMBER
PALE AMBER GOLD
GALLO GOLD
GOLDEN AMBER
LIGHT RED
MEDIUM RED
MEDIUM PINK
BROADWAY PINK
FOLLIES PINK
LIGHT LAVENDER
SPECIAL LAVENDER
LAVENDER
INDIGO
HEMSLEY BLUE
TIPTON BLUE
LIGHT STEEL BLUE
LIGHT SKY BLUE
SKY BLUE
BRILLIANT BLUE
LIGHT GREEN BLUE
BRIGHT BLUE
PRIMARY BLUE
CONGO BLUE
PALE YELLOW GREEN
MOSS GREEN
PRIMARY GREEN
DOUBLE CTB
FULL CTB
HALF CTB
DARK BLUE
WHITE
©American
RGB Macro Chart
RED
255
254
254
254
254
176
96
234
224
175
119
147
88
0
0
52
1
0
0
0
0
0
1
0
209
42
0
8
107
165
0
255
GREEN
206
177
192
165
121
17
0
139
5
77
130
164
2
38
142
148
134
145
121
129
83
97
100
40
219
165
46
107
156
198
0
255
BLUE
143
153
138
98
0
0
11
171
97
173
199
212
163
86
208
209
201
212
192
184
115
166
167
86
182
85
35
222
231
247
189
255
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 16
Mega 24PRO
Fuse Replacement
First unplug the power. The fuse holder is located next to the power
cord. Using a flat-head screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
Mega 24PRO
Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right connectors; it does matter which way the inputs and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved; Contact American DJ® for service.
1-800-322-6337
Mega 24PRO
Warranty
MANUFACTURER’S LIMITED WARRANTY
A. American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American
Audio products to be free of manufacturing defects in material and workmanship for a prescribed
period from the date of purchase (see specific warranty period on reverse). This warranty shall be
valid only if the product is purchased within the United States of America, including possessions
and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
B.
For warranty service you must obtain a Return Authorization number (RA#) before
sending back the product. Contact American DJ, Inc. Service Department at 800-322-6337. Send
the product only to the American DJ, Inc. factory. All shipping charges must be pre-paid. If the
requested repairs or service (including parts replacement) are within the terms of this warranty,
American DJ, Inc. will pay return shipping charges only to a designated point within the United
States. If the entire instrument is sent, it must be shipped in it’s original package. No accessories
should be shipped with the product. If any accessories are shipped with the product, American DJ,
Inc. shall have no liability whatsoever for loss of or damage to any such accessories, nor for the
safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is
modified in any manner which American DJ, Inc. concludes, after inspection, affects the reliability
of the product; if the product has been repaired or serviced by anyone other than the American DJ,
Inc. factory unless prior written authorization was issued to purchaser by American DJ, Inc.; if the
product is damaged because not properly maintained as set forth in the instruction manual.
D.
This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specified above, American DJ, Inc. will replace defective
parts at its expense with new or refurbished parts, and will absorb all expenses for warranty service
and repair labor by reason of defects in material or workmanship. The sole responsibility of American DJ, Inc. under this warranty shall be limited to the repair of the product, or replacement thereof,
including parts, at the sole discretion of American DJ. All products covered by this warranty were
manufactured after January 1, 1990, and bear identifying marks to that effect.
E.
American DJ, Inc. reserves the right to make changes in design and/or improvements
upon its products without any obligation to include these changes in any products theretofore manufactured. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable law, all
implied warranties made by American DJ, Inc. in connection with this product, including warranties
of merchantability or fitness, are limited in duration to the warranty period set forth above. And no
warranties, whether expressed or implied, including warranties of merchantability or fitness, shall
apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy
shall be such repair or replacement as is expressly provided above; and under no circumstances
shall American DJ, Inc. be liable for any loss or damage, direct or consequential, arising out of the
use of, or inability to use, this product. This warranty is the only written warranty applicable to American DJ and American Audio Products and supersedes all prior warranties and written descriptions of warranty terms and
conditions heretofore published.
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 17
MANUFACTURER’S LIMITED WARRANTY PERIODS:
• All American Audio Products = 1-year (365 day) Limited Warranty (except V-Plus Series Amplifiers)
• All American Audio V-Plus Series Amplifiers = 3-year (1095 day) Limited Warranty
• American DJ Lighting and American DJ Branded Products = 1-year (365 day) Limited Warranty
(Such as: Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble
Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands etc. excluding Laser Products, lamps,
and Star Tec Series)
• American DJ Laser Products and Star Tec Products = 90-Day Limited Warranty
• American DJ L.E.D. Products = 3-year (1095 day) Limited Warranty (excluding motors which have
a 1-year (365 day Limited Warranty)
©American DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 18
Mega 24PRO
Model: Mega 24PRO
Specifications
SPECIFICATIONS:
Working Position: Any safe working position
Voltage: 100V ~ 240V, 50/60Hz
LEDs:
24 x 1W LEDs (8 Red, 8 Green, &
8 Blue)
Power Draw:
40W
Power Cord Daisy Chain:10 Fixtures Max.
Beam Angle:
10 Degrees Vertical
40 Degrees Horizontal
Fuse:
4 Amp
Weight: 6.5lbs./ 2.92Kgs.
Dimensions: 16” (L) x 7.5” (W) x 2.8” (H)
405 (L) x 190 (W) x 71 (H) mm
Colors:
RGB Color Mixing
DMX Channels:
3, 6, 7, 10, 12, or 16 DMX Channels
Warranty:
3 Year (1095 days)
Auto Sensing Voltage: This fixture contains a electronic bal-
last, which will auto sense the voltage when it is plugged into the
power source.
Please Note: Specifications and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.
©American
DJ® - www.americandj.com - Mega 24PRO Instruction Manual Page 19
American DJ®
American DJ World Headquarters:
6122 S. Eastern Ave. Los Angeles, CA 90040 USA
Tel: 323-582-2650 / Fax: 323-725-6100
Web: www.americandj.com / E-mail: info@americandj.com
American DJ Europe
Junostraat 2
6468 EW Kerkrade
Netherlands
service@americandj.eu / www.americandj.eu
Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99