V-ZUG Adora TSL WP Operating instructions

V-ZUG Ltd
Tumble dryer
Adora TSL WP
Operating instructions
Thank you for choosing to buy one of our products. Your appliance is made
to high standards and is easy to use. Nevertheless, please take the time to
read these operating instructions in order to familiarize yourself with the
appliance and get the best use out of it.
Please follow the safety precautions.
Modifications
Text, diagrams and data correspond to the technical standard of the appliance at the time these operating instructions went to press. The right to make
technical modifications for the purpose of the further development of the
appliance is reserved.
Symbols used
Caution, risk of fire!
Denotes important safety precautions. Failure to observe said
precautions can result in injury or damage to the appliance or
fittings!
➤
Indicates step-by-step instructions.
– Describes how the appliance reacts to the steps taken.
• Indicates a list.
Denotes useful tips for the user.
Validity
The model number corresponds to the first 3 digits on the identification plate.
These operating instructions apply to the model:
Model
Adora TSL WP
Type
Model no.
WT-ATSLWPZ
959
Variations depending on the model are noted in the text.
© V-ZUG Ltd, CH-6301 Zug, 2010
2
Contents
1
2
3
4
5
Safety precautions
1.1 Transport . . . . . . . . . . . . . . .
1.2 Before using for the first time
1.3 Correct use . . . . . . . . . . . . . .
1.4 Children in the home . . . . . .
1.5 Note on use . . . . . . . . . . . . .
1.6 Maintenance . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Your appliance
2.1 Appliance description . . . . . . . .
2.2 Construction . . . . . . . . . . . . . . .
2.3 Operating and display elements
2.4 Using for the first time . . . . . . .
2.5 Select language for the display
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
12
12
13
14
16
18
Programme overview
3.1 Programme sequence for automatic programmes
3.2 Automatic programmes . . . . . . . . . . . . . . . . . . . .
3.3 Fabric type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4 Additional functions . . . . . . . . . . . . . . . . . . . . . . .
3.5 Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
19
19
20
22
24
25
User settings
4.1 Language . . . . . . . . . . . .
4.2 Level of dryness . . . . . . .
4.3 Childproof lock . . . . . . . .
4.4 Brightness . . . . . . . . . . .
4.5 Restoring factory settings
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
28
30
31
32
33
34
.
.
.
.
.
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
35
36
39
40
40
41
43
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Drying
5.1 Programme selection . . . . . . . . . . . . . . . . . . . . . . .
5.2 Changing selection . . . . . . . . . . . . . . . . . . . . . . . . .
5.3 Interrupting a programme . . . . . . . . . . . . . . . . . . . .
5.4 Aborting a programme . . . . . . . . . . . . . . . . . . . . . .
5.5 Programme selection with childproof lock activated
5.6 End of programme . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
5
5
6
6
9
10
11
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3
6
Care and maintenance
6.1 Cleaning intervals . . . . . . . . . . .
6.2 Error message A9 . . . . . . . . . . .
6.3 Build-up of fluff . . . . . . . . . . . . . .
6.4 Cleaning the door filter . . . . . . .
6.5 Clean the base cassette . . . . . .
6.6 Cleaning the mesh filter in base
6.7 Cleaning the filter mat . . . . . . . .
6.8 Cleaning the moisture sensor . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
44
44
45
45
46
47
47
48
49
7
Trouble-shooting
50
7.1 What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
8
Drying tips
56
8.1 Fabric care symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
9
Spare parts
58
10 Technical data
59
10.1 Notes for testing institutes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
10.2 Automatic energy-saving standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
11 Disposal
61
12 Notes
62
13 Index
64
14 Repair service
67
4
1
Safety precautions
The appliance corresponds to recognised technology standards
and the relevant safety regulations. Proper use of the appliance is
however essential to avoid damage and accidents. Please
therefore follow the precautions given in these operating
instructions.
In accordance with the requirements of IEC 60335-1:
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless supervised or unless they have been given instruction
concerning the use of the appliance by a person responsible for their
safety.
Read the operating instructions carefully before placing the appliance
in operation!
1.1
Transport
Fr
on
t
The appliance is only to be transported in the upright position!
Transporting it in any other position will result in damage to the
appliance!
When carried carefully, without being shaken, the appliance may
be tilted to the left by a maximum of 90° (viewed from the front).
Front
Front
Back
Front,
upside down
Side
5
1 Safety precautions
1.2
Before using for the first time
Allow the appliance to stand for about 2 hours in the normal
operating position. Failure to do so can result in damage to the
appliance.
• The appliance must be installed and connected to the electricity supply in
accordance with the separate installation instructions. The necessary work
should be carried out by a qualified fitter or electrician.
• Dispose of the packaging material in accordance with local regulations.
• Ensure access to the place of disconnection (e.g. socket outlet, wall switch,
fuse).
• It is advisable to wipe out the drum with a damp cloth.
• Please follow the precautions in the USING FOR THE FIRST TIME section
before operating the newly installed appliance.
1.3
Correct use
• The appliance is suitable for drying home textiles. It is designed for use in
the home and for the above-mentioned purpose only. No liability is
assumed for any damage caused by improper or incorrect use.
• Any repairs, modifications or manipulations to the appliance, especially
any electrical parts, should only be carried out by the manufacturer, its
Customer Services or similarly qualified persons. Repairs if carried out
incorrectly may cause serious injury, damage to the appliance and fittings,
as well as affect the functioning of the appliance. If the appliance is not
working properly or in case of a repair order, follow the instructions given
in the REPAIR SERVICE section. If necessary, please contact Customer
Services.
• Use original spare parts only.
• Retain these operating instructions for future reference. If you sell or pass
the appliance on to a third party, please ensure these operating instructions accompany the appliance, together with the instructions on installation. In this way, the new owner can inform themselves about how to use
the appliance correctly and read the pertinent safety precautions.
6
1 Safety precautions
Do not use the appliance to dry the following
• Unwashed washing.
• Textiles that have been cleaned, treated or soaked with flammable
chemicals, detergents or solvents (benzine, alcohol, stain remover, oil,
paint, wax, etc). Fire or explosion hazard!
Wash materials containing such substances first by hand with water or
allow the solvent to evaporate completely.
• Fabrics with traces of hair spray, hair gel, nail varnish remover or other
similar substances. Danger of gas build-up!
• Washing containing foam rubber or other rubber-like material. Ignition
hazard!
To minimize the risk of fire in a tumble dryer, the following should be
observed:
• Regularly clean the filters.
• Items that have been spotted or soaked with vegetable or cooking oil
constitute a fire hazard and should not be placed in a tumble dryer.
Oil-affected items can ignite spontaneously, especially when exposed to
heat sources such as in a tumble dryer. The items become warm, causing
an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot
escape, the items can become hot enough to catch fire. Piling, stacking or
storing oil-affected items can prevent heat from escaping and so create a
fire hazard.
If it is unavoidable that fabrics that contain vegetable or cooking oil or have
been contaminated by hair care products be placed in a tumble dryer they
should first be washed in hot water with extra detergent – this will reduce,
but not eliminate, the hazard. The «cool down» cycle of tumble dryers
should be used to reduce the temperature of the items. They should not be
removed from the tumble dryer or piled or stacked while hot.
• Items that have been previously cleaned in, washed in, soaked in or
spotted with petrol/gasoline, dry-cleaning solvents or other flammable or
explosive substances should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments
include acetone, denatured alcohol, petrol/gasoline, kerosene, spot
removers (some brands), turpentine, waxes and wax removers.
7
1 Safety precautions
• Items containing foam rubber (also known as latex foam) or similarly
textured rubber like materials should not be dried in a tumble dryer on a
heat setting.
Foam rubber materials can, when heated, produce fire by spontaneous
combustion.
• Fabric softeners or similar products should not be used in a tumble dryer
to eliminate the effects of static electricity unless this practice is specifically
recommended by the manufacturer of the fabric softener or product.
• Undergarments that contain metal reinforcements should not be placed in
a tumble dryer.
Damage to the tumble dryer can result if metal reinforcements come loose
during drying.
• Plastic articles such as shower caps or babies’ waterproof napkin covers
should not be placed in a tumble dryer.
• Rubber-backed articles, clothes fitted with foam rubber pads, pillows,
galoshes and rubber-coated tennis shoes should not be placed in a tumble
dryer.
8
1 Safety precautions
1.4
Children in the home
• Packaging material (e.g. plastic, polystyrene) can be dangerous for
children. Danger of suffocation! Keep packaging material away from
children.
• The appliance is designed for use by adults who are familiar with these
operating instructions. Children are often unable to recognise the danger
of electrical appliances. Ensure proper supervision and do not allow
children to play with the appliance – there is a danger that children could
get locked inside.
• Tumble dryer additives (e.g. tumbler dryer sheets) can irritate the eyes,
mouth and throat and even cause choking! Keep tumble dryer additives
out of the reach of children.
• Use the childproof locking facility.
9
1 Safety precautions
1.5
Note on use
Do not use the pivoting operating panel to lift or move the
appliance.
• Do not use the appliance if visibly damaged or if the inlet pipes are
damaged. Contact Customer Services.
• If the appliance is not operating properly, disconnect it from the electricity
supply immediately.
• If the mains cable of the appliance is damaged, it must be replaced by
Customer Services in order to avoid hazard.
• Keep pets away from the appliance.
• To protect your washing, follow the fabric care symbols and the hints and
advice in the DRYING TIPS section.
• Do not use a fabric conditioner or other fabric care solutions for the wash.
Otherwise pay attention to the manufacturer’s information.
• Do not operate the appliance without or with a damaged door filter. Fire
hazard from fluff build-up!
• Take care not to allow fluff to build up around the drier.
• Before closing the appliance door and starting a programme, ensure that
there are no foreign objects or pets in the drum.
• During the drying process, the back, drum and inside of the appliance door
become hot. Care should be taken to avoid touching these parts.
• Never end the drying programme prematurely. A short cooling phase takes
place at the end of the drying programme. Providing you are able to do so,
remove the load quickly and spread it out to enable the heat to evaporate.
• The condensate water collected is not suitable for drinking.
• During longer periods of non-use, switch off the electricity by pulling out the
mains plug. Never pull the mains plug out by the cable.
10
1 Safety precautions
1.6
Maintenance
Ensure the drum has stopped moving before reaching inside. Do
not touch the drum while it is still in motion – risk of serious injury!
• Disconnect the appliance from the mains before carrying out maintenance
work.
• The door filter must be cleaned each time after a drying programme.
• Do not spray the outside or the inside of the appliance with water. Do not
use a steam cleaner.
• Do not sit, lean or rest on the appliance door.
• Do not climb on to the appliance. Danger of tipping!
• Use original spare parts only.
11
2
Your appliance
2.1
Appliance description
The appliance operates with a closed air circuit. With the help of the heat
pump, the moisture is extracted from the air which is then heated up again.
Recovering heat in this way sharply reduces energy consumption. The
appliance has no electric heating element.
Thanks to the heat pump, the appliance dries at lower temperatures. All the
programmes are therefore gentler on your laundry.
The condensate water collected is discharged through an outlet at the rear
into the drainage system.
In general, as heat pumps give off a certain amount of moisture, rooms in
which there are heat pumps should be aired. If the room is kept closed, it
should be aired occasionally (either by opening the door to the room or a
window) between several consecutive drying programmes.
• Capacity: 6 kg dry load
• 6 automatic programmes
• 3 favourite programmes
• Timed drying
• Programme for various fabrics
–
–
–
–
–
Airing
Silk
Fluffing
Crease guard
Shirts
–
–
–
–
–
Leisurewear
Denim
Baby garments
Down filling thin/thick
Hygiene
• Additional functions
– Ultra care
– Easy care
– Delayed start
• Crease guard at end of programme
• Plain text display
• Language selection
• Childproof lock
• Automatic energy-saving stand-by
12
2 Your appliance
2.2
Construction
The appliance door can be set to open to the left or to the right. Our
Customer Services can make the necessary adjustments to the
appliance.
1
Operating and display elements
(pivoting operating panel)
The operating panel can be set in one of
3 positions.
2
Appliance door
3
Door filter
4
Cover
5
Cassette in base
6
Air grille
7
Identification plate/
serial number (FN)
8
Cleaning instructions
Cassette in base
9
Mesh filter in base
10 Filter mat
1
3
2
10 9
5
4 8 7
6
13
2 Your appliance
2.3
Operating and display elements
MIN.
Automatic programmes
Extra dry
Normal dry
Iron dry
Damp
Woollens
WetClean
Favourites
Fabric type
Additional programme
MIN.
Timed drying
Additional functions
Ultra care
Easy care
Delayed start
End of programme
14
2 Your appliance
Display (plain text display)
Various information appears in the display during the programme selection
and the programme sequence:
• Programme name with duration
• Moisture level with duration remaining
• Additional functions
• Delayed start
• User settings
• Hints and trouble-shooting
Indicator lights
The buttons, the automatic programmes, the additional programmes and
certain additional functions are equipped with an indicator light.
Indicator light flashes
Select programme or function.
Indicator light is illuminated
Programme or function is active.
Indicator light is not illuminated
Programme or function is switched off.
15
2 Your appliance
2.4
Using for the first time
When the appliance is connected to the power supply for the first time, it is
possible to select a function test. The purpose of the function test is to check
the installation and it lasts about 3 minutes. For the function test the appliance
must not to have been standing in the normal operating position for approx.
2 hours as the heat pump is not started. The function test can therefore be
selected immediately after installation.
The function test cannot be aborted by an interruption of the mains
supply.
Once the function test has been run, it can no longer be selected and
the appliance enters the normal selection mode.
Select language for the function test
➤
Connect the appliance and wait until the
following appears in the display:
Deutsch
fr/it/rm/...
ok
English
it/rm/en...
ok
Confirm language with «OK»:
➤ Press the
button.
Change language:
➤ Press the
button repeatedly until the
desired language appears in the display
e.g.:
➤
Press the
button.
– The setting is accepted and the
display shows:
Function test
abort
ok
Start function test «OK»
➤
16
Press the
button.
Function test
0h03
2 Your appliance
The function test can be interrupted in 2 ways:
1. Open the appliance door.
Function test pause
– In the display appears:
Close appliance door
– After closing the appliance door the
display appears:
Or
2. Press the
button.
– In the display appears:
Function test
abort
pause
continue
Function test
abort
pause
continue
Function test
0h01
Continue the function test «continue»:
➤
Press the
button.
– The remaining duration of the function
test is shown in the display e.g.:
Function test «abort»:
➤
Press the
button.
– The function test is aborted and the
display shows:
Function test
aborted
– The display goes out automatically after
15 seconds or after the following
actions:
➤
Open the appliance door or press
button
.
End of function test:
– On completion of the function test the
display shows:
Function test
complete
– The display goes out automatically after
30 minutes or after the following actions:
➤
Open the appliance door or press
button
.
Before the appliance is ready to operate, the user language must be
selected once; see SELECT LANGUAGE FOR THE DISPLAY.
17
2 Your appliance
2.5
Select language for the display
After using for the first time the language must be selected once. It can be
changed at any time under USER SETTINGS.
➤
➤
Press the
button repeatedly until the
desired language appears in the display,
e.g.:
Press the
button to confirm the
language selection.
Deutsch
fr/it/rm/...
ok
Select programme
– The setting is accepted.
The appliance is ready to operate after the required waiting time of
approx. 2 hours in the normal operating position.
18
3
Programme overview
3.1
Programme sequence for automatic programmes
The drying programme has 3 phases:
Drying
The washing is tumble dried until it reaches the set level of dryness. The
drying programme is monitored by a moisture sensor. As soon as the
required level of dryness is reached, the «Cooling down/airing» phase starts.
Cooling down/airing
The washing is cooled down to a temperature at which creasing is minimized.
This phase lasts between 1–10 minutes. The washing can now be unloaded.
If the washing is not unloaded, the «Crease guard» programme starts.
Crease guard
The dried washing is moved at frequent intervals to prevent creasing.
If the «Ultra care» function has been selected «Crease guard» runs
90 minutes, otherwise with all other programmes it runs 30 minutes. «Crease
guard» can be stopped at any time simply by opening the appliance door or
by pressing the
button.
19
3 Programme overview
To select the right drying programme, follow the fabric care symbols
on garment labels, e.g.
.
3.2
Automatic programmes
Programme Symbol
Extra dry
Use
For thick, multi-layered fabrics and mixed loads.
Not suitable for knitted or woven articles such as T-shirts and underwear
as they could shrink.
Normal dry
For similar items of washing (e.g. terry towelling and underwear).
Iron dry
For items that are to be ironed.
Damp
For items that are to be pressed in a mangle (e.g. table linen).
Woollens
For woollen fabrics labelled as washable. Gentle drying through a gentle
drum action and a low temperature (ca. 45 °C).
WetClean
For loosening up delicate fabrics (unload immediately after programme
finishes).
Favourites
3 programmes which can be freely put together and saved (
Timed
drying
20
MIN.
).
For drying off textiles. Also for drying suitable sleeping bags and quilts, and
any individual items of washing.
3 Programme overview
The stated values for the programme duration and energy apply for the
maximum stated capacity with a wash spun at approx. 1000 rpm (corresponds to a residual moisture of approx. 60 %). A higher spinning speed and
a smaller load reduce them by about 20–30 %.
Capacity
Residual moisture
Programme duration
Energy
1–6 kg
–4 % to –1 %
1h50
2.00 kWh
1–6 kg
–1 % to 2 %
1h30
1.94 kWh
1–6 kg
8 % to 16 %
1h20
1.50 kWh
1–6 kg
20 % to 30 %
1h10
1.30 kWh
1 kg
0 % to 5 %
1h35
1.30 kWh
1 kg
damp
0h04
0.10 kWh
–
–
–
–
1–6 kg
–
0h10 to 1h30
–
21
3 Programme overview
3.3
Fabric type
Use
Airing
For refreshing or airing little-worn garments.
Silk
For drying silk fabrics. Follow the fabric care labels as silk tends to crease easily. Low
temperature for gentle drying.
Fluffing
Brings the bounce back to woollen textiles. Unload as soon as the programme ends.
The textiles are not dried!
Crease
guard
Creases that come from spinning in the washing machine are reduced (e.g. shirts,
blouses). Laundry is ready for ironing.
Shirts
Fabrics are gently dried to «cupboard dry».
Leisurewear Leisure- and sportswear (sympatex, goretex, etc.) are dried gently.
Denim
Baby
garments
Denim fabrics are dried to «cupboard dry». Follow the fabric care labels as denim
material can shrink.
Baby garments are gently dried to «cupboard dry». The washing is dried hygienically
through an extended drying phase.
Thin down For light-weight down textiles (e.g. thin duvets and jackets).
filling
Optimum load: 1 item
For bulky down textiles (e.g. pillows, jackets and thick duvets).
Thick down
If recommended, tennis balls can be used for fluffing up the down during drying.
filling
Optimum load: 1 item
Hygiene
22
The washing is dried hygienically through an extended drying phase.
Ensures all germs are killed. Use for non-delicate fabrics only.
3 Programme overview
Capacity
Residual moisture
Programme duration
Energy
2.5 kg
–
0h10
0.02 kWh
1.5 kg
0 % to 2 %
0h45
1.10 kWh
1 kg
–
0h04
0.10 kWh
1 kg
–
0h20
0.03 kWh
7 in total
0 % to 2 %
0h45
1.05 kWh
3 kg
0 % to 2 %
1h25
1.35 kWh
4 kg
–1 % to 2 %
1h20
1.40 kWh
6 kg
–1 % to 1 %
2h00
1.95 kWh
2 kg
–1 % to 1 %
1h55
1.85 kWh
2 kg
–1 % to 1 %
2h40
2.00 kWh
3 kg
–5 % to 2 %
2h00
2.00 kWh
23
3 Programme overview
3.4
Additional functions
Function/symbol
Ultra care
Easy care
Delayed start
24
Use
Max.
load
Very gentle programme with a lower drying temperature. Particularly
2.5 kg
suitable for fine textiles.
Gentle drying for mixed fabrics (e. g. shirts, pullovers, T-shirts). The
level of dryness is reduced.
Take advantage of cheap-rate electricity (setting range: 1–24 hours).
During shut-off periods – determined by the local electricity supplier –
the delayed start time is extended by the length of time the electricity
is shut off. This is not shown in the display.
2.5 kg
–
3 Programme overview
3.5
Favourites
Simplifies selecting frequently used programmes. You can compile
your own favourites. Favourites are easy to start.
• A maximum of 3 favourites can be saved.
The appliance door has to be open to define, change or delete a
favourite.
Defining your favourites
➤
Open the appliance door.
➤
Press the
button.
Define favourite
➤
Press the
button again.
Define favourite
1 empty
➤
Select the desired automatic programme,
additional programme and additional
functions, e.g.:
➤
Press the
Normal dry
1 easy care
1 save changes?
YES:
button.
1h25
NO:
Save favourite:
«YES»:
➤
Press the
button.
– The changes are saved.
«NO»:
➤
Press the
button.
– The changes are not saved.
Normal dry
1 easy care
1h25
Define favourite
1 empty
25
3 Programme overview
Starting your favourite
➤
Close the appliance door.
➤
Press the
button repeatedly until the
desired favourite appears in the display,
e.g.:
Normal dry
1 easy care
1h25
– The programme starts automatically
after 20 seconds.
Changing your favourite
➤
Open the appliance door.
➤
Press the
button repeatedly until the
desired favourite appears in the display,
e.g.:
Normal dry
1 easy care
1h25
To change your favourite:
Select a new automatic programme,
additional programme and additional
functions, e.g.:
Extra dry
1 easy care
1h35
➤
➤
Press the
1 save changes?
YES:
button.
NO:
Save changes:
«YES»:
➤
Press the
button.
– The changes are saved.
«NO»:
➤
Press the
button.
– The changes are not saved.
26
Extra dry
1 easy care
1h35
Normal dry
1 easy care
1h25
3 Programme overview
Deleting a favourite
➤
Open the appliance door.
➤
Press the
button repeatedly until the
favourite to be deleted appears in the
display, e.g.:
➤
Hold the
3 seconds.
button depressed for about
Normal dry
1 easy care
1 clear?
YES:
1h25
NO:
Delete favourite:
«YES»:
➤
Press the
button.
– The favourite is deleted.
«NO»:
➤
Press the
button.
– The favourite remains
saved.
Define favourite
1 empty
Normal dry
1 easy care
1h25
27
4
User settings
Providing no programme is running and no error message is displayed, the
user settings can be changed with the appliance door open or closed. The
procedure is generally the same for all settings.
Changing user settings
➤
Hold the
5 seconds.
➤
Press the
button repeatedly until the
desired setting appears in the display, e.g.:
➤
button depressed for
To change, press the
button.
– The setting is taken over automatically
and must not be confirmed.
User settings
FNXXX XXXXXX
Childproof lock
ON
Childproof lock
OFF
Exiting user settings
➤
28
Press the
button repeatedly until the display goes out.
If no button is pressed within the next 20 seconds, user settings is
exited and the display goes out.
4 User settings
The following diagram gives an overview of the possible user settings.
➤
Hold
button depressed for 5 seconds
User settings
FNXXX XXXXXX
Language
D/F/I/R/E
English
Level of dryness
3
Childproof lock
OFF
Brightness
3
Factory settings
restore?
•
•
•
•
•
Text in Deutsch
Texte en français
Testo in italiano
Text in english
…
•
•
•
•
•
1
2
3
4
5
very low drying
low drying
normal drying *
strong drying
very strong drying
• OFF *
• ON
•
•
•
•
•
1
2
3
4
5
very dark
dark
medium *
bright
very bright
• YES
• NO
* Factory setting
29
4 User settings
4.1
Language
The language in the display is selected after using for the first time under
SELECT LANGUAGE FOR DISPLAY and can be changed at any time, as
described in this section.
Changing the language
➤
Hold the
5 seconds.
➤
Press the
button repeatedly until the
current language setting appears in the
display, e.g.:
➤
button depressed for
Press the
button repeatedly until the
desired setting appears in the display, e.g.:
– The setting is taken over automatically
and must not be confirmed.
➤
30
Press the
button repeatedly until the
display goes out.
User settings
FNXXX XXXXXX
Language
D/F/I/R/E
English
Sprache
D/F/I/R/E
Deutsch
4 User settings
4.2
Level of dryness
The appliance is designed to provide the most energy-efficient drying. The
moisture sensor continually monitors the level of dryness of the washing. If
the washing is not being dried sufficiently – or being overdried – the level of
dryness can be reset.
Changing the level of dryness changes the level of dryness setting of
all the programmes. Care should be taken when increasing the level
of dryness, as overdrying can damage fabrics.
Changing the level of dryness
➤
Hold the
5 seconds.
➤
Press the
button repeatedly until the
current level of dryness appears in the
display, e.g.:
➤
➤
button depressed for
Press the
button repeatedly until the
desired setting appears in the display, e.g.:
User settings
FNXXX XXXXXX
Level of dryness
3
Level of dryness
5
Press the
button repeatedly until the
display goes out.
Levels of dryness
1
2
3
4
5
Very low drying
Low drying
Normal drying (factory setting)
Strong drying
Very strong drying
31
4 User settings
4.3
Childproof lock
The childproof lock is to prevent small children accidentally starting or
stopping a programme. When the childproof lock is on, a programme can
only be started by pressing two buttons simultaneously.
Switching the childproof lock on/off
➤
Hold the
5 seconds.
➤
Press the
button repeatedly until the
current setting appears in the display, e.g.:
➤
Press the
button depressed for
button.
– The setting is taken over automatically
and must not be confirmed.
➤
32
Press the
button repeatedly until the
display goes out.
User settings
FNXXX XXXXXX
Childproof lock
OFF
Childproof lock
ON
4 User settings
4.4
Brightness
This function can be used to change the display contrast between the text and
the background.
Changing the brightness in the display
➤
Hold the
5 seconds.
➤
Press the
button repeatedly until the
actual brightness level appears in the
display, e.g.:
➤
➤
button depressed for
Press the
button repeatedly until the
desired setting appears in display, e.g.:
User settings
FNXXX XXXXXX
Brightness
3
Brightness
5
Press the
button repeatedly until the
display goes out.
Levels of brightness
1
2
3
4
5
very dark
dark
medium (factory setting)
bright
very bright
33
4 User settings
4.5
Restoring factory settings
The factory settings can be restored.
Any favourites that have been saved will be deleted.
➤
Hold the
5 seconds.
button depressed for
User settings
FNXXX XXXXXX
➤
Press the
appears:
repeatedly until in the display
Factory settings
restore?
➤
Press the
button.
Factory settings
YES:
Restore factory settings:
34
«YES»:
➤
Press the
button.
«NO»:
➤
Press the
button.
Factory settings
restored!
NO:
5
Drying
Preparing the appliance
After the appliance is transported or re-sited it must be left
standing in the normal operating position for approx. 2 hours.
Failure to observe this can result in damage to the appliance.
➤
Plug the appliance in at the mains or turn
the wall switch on.
1
1
0
0
Loading the appliance
➤
Open the appliance door (press the middle of
the lock side of the door at the edge).
➤
Loosely load wet washing items one by one.
• See PROGRAMME OVERVIEW for maximum
drying load capacity.
• Do not fill drum more than ½ full.
• Large blankets, in particular, need plenty of
room to tumble.
➤
Close the appliance door (pushing firmly to).
When you close the appliance door, check that no items of washing
are trapped.
– In the display appears:
Select programme
– The programme selection indicator lights
flash.
If no programme selection is made within 20 seconds, the indicator lights and
display go out. However, it is still possible to make a programme selection.
35
5 Drying
5.1
Programme selection
«Tip and go»
An automatic programme can be selected with the press of a single button.
All the necessary settings for the programme are made automatically.
Additional functions can be selected or deselected by pressing the corresponding button.
If no buttons are pressed within 20 seconds, the drying programme selected
starts automatically.
Use the PROGRAMME OVERVIEW to determine which programme is
the most suitable for your washing.
Duration remaining indicator
The expected programme duration is displayed when selecting the
programme. This refers to a similar wash composition with defined weight.
Load determining takes place after the programme start:
– In the display appears:
Determining load
1h35
– The letter «h» flashes:
The expected remaining duration is calculated and then displayed.
The actual running time can vary from the displayed duration
according to the fabric type. Therefore the indicated remaining
duration can stay unchanged for a few minutes, especially towards
the end of the programme. During this period the letter «h» flashes
and the remaining duration calculation is carried out anew.
– The letter «h» starts to flash again and the
display shows:
– The achieved level of dryness is shown
alternately.
– The remaining duration is calculated anew
and then displayed.
36
Calculating remaining time 0h15
5 Drying
Selecting an automatic programme
➤
Close the appliance door.
– The indicator lights for the programme selection buttons and the
additional programme flash.
MIN.
➤
Press the required programme selection button.
– The indicator light for the programme selected illuminates.
– The programme selected and the likely duration (hours/minutes) is
shown.
– The indicator lights for any additional functions that may be selected
flash for 20 seconds.
During these 20 seconds, it is possible to select a different
drying programme. In this case, all additional programmes
selected are cancelled and must be reselected.
– If no buttons are pressed within 20 seconds, the drying programme
selected starts automatically.
37
5 Drying
Selecting timed drying
➤
Close the appliance door.
– The indicator lights for the programme selection buttons and the
additional programme flashes.
MIN.
➤
Press the
➤
Press repeatedly to select desired duration, i.e. 10, 20, 30, 40, 50, 60 or
90 minutes.
MIN.
button.
– The duration selected appears in the display.
– The indicator lights for any additional functions that may be selected
flash for 20 seconds.
The programme duration always includes a 10-minute «Cooling
down/Airing» phase.
Selecting ultra care or easy care
➤
38
When the indicator lights flash, press the
or
button.
5 Drying
Selecting delayed start
MIN.
➤
Hold button
pressed immediately after the programme selection, or
keep pressing it until the desired delayed start duration shows in the
display (max. 24 hours).
– The display goes dark.
– After the desired delayed start period is up, the programme selected
starts automatically.
Items of washing may be added at any time.
The time remaining to the delayed start can be reduced (in hourly
intervals) to zero by repeatedly pressing the
button.
5.2
Changing selection
During programme selection
➤
Press a programme selection button again.
– All selected settings are cancelled.
Once a programme has started, it is no longer possible to change it.
The programme must be aborted.
39
5 Drying
5.3
Interrupting a programme
A running programme can be interrupted at any time to add/remove an item
of washing before time.
After closing the appliance door the heat pump starts after a waiting
time of 10 minutes and the programme duration is lengthened correspondingly.
➤
Open the appliance door.
– The indicator light for the programme selected illuminates.
– The programme name and duration remaining or delayed start period
flash in the display.
➤
Close the appliance door (pushing firmly to).
– The indicator light for the programme selected flashes.
➤
Press the flashing programme selection button.
– The drying programme continues.
5.4
➤
Aborting a programme
Press the
button.
– The programme is aborted and all settings cancelled.
40
5 Drying
5.5
Programme selection with childproof lock activated
➤
Close the appliance door.
➤
Press the desired programme selection button.
In this example:
– In the display appears:
Childproof lock
– The indicator lights for the programme
selection buttons flash.
➤
Hold the
press the
programme selection button depressed and at the same time
button.
– The indicator lights for the additional functions flash.
MIN.
The appliance can be operated without further regard to the childproof lock until the programme starts.
Programme interruption through door opening
➤
Open the appliance door.
– The running programme is interrupted.
➤
Close the appliance door.
➤
Hold the activated programme selection button – the indicator light flashes
– depressed and at the same time press the
button.
– The programme is continued.
41
5 Drying
Programme abort through door opening
➤
Open the appliance door.
– The running programme is interrupted.
➤
Hold the activated programme selection button – the indicator light is
illuminated – depressed and at the same time press the
button.
– The programme is aborted.
Programme abort through button selection
With the door closed, carry out the following step 2×:
➤
Hold the activated programme selection button – the indicator light is
illuminated – depressed and at the same time press the
button.
– Programme is aborted.
42
5 Drying
5.6
End of programme
– In the display appears:
– The indicator light for the programme that
has finished illuminates.
– The indicator light for the
flashes.
End of programme
Clean filter in door
button
«Crease guard» starts if the appliance is not unloaded straightaway. When it
has finished, the indicator lights and display go out.
Unloading the washing
➤
Open the appliance door.
– The indicator lights and the display go out.
➤
Unload the washing.
➤
Clean the door filter.
➤
Close the appliance door.
If the appliance door is opened during the «Cool down» phase, the
programme is aborted and the indicator lights and display go out.
When you have finished washing for the day
➤
Clean the door filter.
➤
Check the mesh filter in base and clean it if necessary.
➤
Close the appliance door.
43
6
Care and maintenance
To minimize the risk of fire hazard regularly clean the filters!
6.1
Cleaning intervals
1
4
3
2
Pos. Part
Cleaning intervals Cleaning
each time after a drying
remove any fluff
programme
1
Door filter
whenever there is a
heavier build-up of
deposits
using an abrasive liquid cleaning agent and a
sponge, rinse with water and allow to drip dry;
use cleaning vinegar to soften hard water
2
Base cassette
as required **
remove any fluff
as required **
remove any fluff
3
Mesh filter
in base
whenever there is a
heavier build-up of
deposits
using an abrasive liquid cleaning agent and a
sponge, rinse with water and allow to drip dry;
use cleaning vinegar to soften hard water
4
Filter mat * in
every six months
base mesh filter
rinse under running water, then allow to drip
dry
Appliance
housing
clean with damp cloth and wipe dry
occasionally
* A spare filter mat is included in the service set supplied.
** A coating of fluff can build up more or less quickly depending on the type of wash and the size of load.
44
6 Care and maintenance
6.2
Error message A9
A9 Mesh and filter
clean
A thick coating of fluff results in a reduced process air flow which can
impair the drying process and activate fault message «A9 Mesh and
filter clean».
Check and, if necessary, clean the following parts in the appliance:
• Door filter
• Base cassette
• Mesh filter in base
• Filter mat in base mesh filter
If the error message still appears after the mesh filter in base and the
filter mat have been cleaned, clean the filter mat (in front of the heat
pump) carefully using a vacuum cleaner.
6.3
Build-up of fluff
Fluff is made up of fine textile fibres that largely come from the manufacturing
process, from wear and tear during use and from items being washed. Fluff
is not caused by excessive strain on the washing in the appliance. Even when
washing is hung out to dry on a washing line, fluff is shed when the washing
is shaken out or ironed.
Fluff sticks to washing when it is wet. The fluff is released during tumble drying
and gets trapped in the door filter. This is why there is always a build-up of
fluff in the filter – sometimes more, sometimes less depending on the type of
washing – after tumble drying.
45
6 Care and maintenance
6.4
Cleaning the door filter
➤
Open the appliance door.
➤
Lift the door filter 1 out.
➤
Remove any fluff.
➤
Hold door mesh filter up to the light to detect
deposits. Wash door mesh filter to clean off
heavy deposits.
➤
46
➤
Clean with an abrasive liquid cleaning
agent (immerse if necessary) and a
sponge; use cleaning vinegar to soften
hard water.
➤
Rinse off under running water and allow to
drip dry.
Replace the door filter. Ensure it is positioned
correctly.
The appliance will not start without the
door filter in place.
each time after a drying programme
1
6 Care and maintenance
6.5
Clean the base cassette
➤
Open the appliance door.
➤
Open the cover 1 by pressing the release
catch 2.
➤
Remove the cassette in base 3.
➤
Remove fluff from the base mesh filter in
the base cassette.
➤
Replace the cassette in base and close
the cover.
The appliance will not start without
the cassette in base being in place.
6.6
Open the appliance door.
➤
Open the cover 1 by pressing the release
catch 2.
➤
2
3
1
Cleaning the mesh filter in base
➤
➤
as required
Take out base cassette 3 and separate
filter mat 5 from the base mesh filter 4.
Hold base mesh filter up to the light to
detect deposits. Wash base mesh filter to
clean off heavy deposits.
➤
Clean with an abrasive liquid cleaning
agent (immerse if necessary) and a
sponge; use cleaning vinegar to soften
hard water.
➤
Rinse off under running water and
allow to drip dry.
➤
Replace the filter mat on the base mesh
filter and insert it in the base cassette.
Make sure it is correctly positioned.
➤
Replace the cassette in base and close
the cover.
as required
5
2
4
3
1
47
6 Care and maintenance
6.7
Cleaning the filter mat
Clean filter mat in base mesh filter
every six months
Never operate the appliance without the filter mat.
A spare filter mat is included in the service set supplied.
➤
Open the appliance door.
➤
Open the cover 1 by pressing the release
catch 2.
➤
Remove the cassette in base 3.
➤
Remove the mesh filter in base 4 from the 4
cassette in base.
➤
Remove the filter mat 5 from the mesh
filter in base.
➤
Rinse the filter mat under running water
and allow to drip dry.
➤
Put the filter mat back into the mesh filter
in base and then return this into the
cassette in base. Ensure the filters are
sitting properly.
➤
Replace the cassette in base and close
the cover.
48
5
3
2
1
6 Care and maintenance
Cleaning the filter mat in front of the heat pump
as required
Never remove the filter mat.
If the «A9 Mesh and filter clean» error message still appears after the
filters and the filter mat have been cleaned, clean the filter mat in front
of the heat pump very carefully using a vacuum cleaner. The fins
behind could otherwise be damaged.
➤
Open the appliance door and the cleaning
cover.
➤
Remove the cassette in base.
➤
Clean the filter mat carefully using a vacuum
cleaner with the crevice tool attachment.
➤
Replace the cassette in base and close the
cleaning cover.
6.8
Cleaning the moisture sensor
The moisture sensor detects the level of moisture in the washing. If the
moisture sensor is dirty, it may produce false readings.
If the following appears in the display, the
moisture sensor has to be cleaned:
➤
Open the appliance door.
➤
Remove any fluff or foreign objects on the
moisture sensor 1. If necessary, clean with
a damp cloth and then wipe dry.
A3 Moisture sensor
clean
1
49
7
Trouble-shooting
This section lists problems which you can resolve simply yourself by following
the instructions given. If any other error messages appear or if you are unable
to resolve the problem, call Customer Services.
Before calling Customer Services,
please note down the error message
in full (message, (FN) serial number
F.. see instructions
EXXX
FNXXX XXXXXX
and (E) error number).
7.1
What to do if …
… A0 Check outlet
appears
Possible cause
Solution
• The drain hose is
blocked, kinked or
defective.
➤
Check the part of the hose that is not
housed in the appliance.
➤
Resolve the problem.
• Pumping height of the
drain hose (>1.2 m).
➤
Cancel the error message by pressing the
button.
• Connected to concealed
double drain trap.
➤
Start the programme.
➤
If the fault reappears, note down the
complete error message and FN number,
then switch off mains supply once more.
➤
Call Customer Services.
50
7 Trouble-shooting
… A3 Moisture sensor
appears
clean
Possible cause
Solution
• The moisture sensor is
dirty or wet.
➤
Clean the moisture sensor and then wipe
dry.
➤
Cancel the error message by pressing the
button.
➤
Start the programme.
➤
If the fault reappears, note down the
complete error message and FN number,
then switch off mains supply once more.
➤
Call Customer Services.
… A9 Mesh and filter
appears
clean
Possible cause
Solution
• The following parts in the
appliance could be
blocked:
➤
Check and, if necessary, clean the parts.
➤
Cancel the error message by pressing the
button.
– Door filter
➤
Start the programme.
– Mesh filter in base
➤
If the fault reappears, note down the
complete error message and FN number,
then switch off mains supply once more.
➤
Call Customer Services.
• The ambient temperature
is too high.
➤
Improve the ventilation of the room.
• The load is too wet/
heavy.
➤
Spin washing at a higher speed/reduce the
size of load.
– Filter mat
Do not disregard this error message. Failure to observe it can cause
the appliance to become defective.
51
7 Trouble-shooting
… F.. see instructions
FNXXX XXXXXX
EXXX
appears
Possible cause
Solution
• Various situations can
lead to an «F» error
message.
➤
Cancel the error message by pressing the
button.
➤
Switch mains supply off for approx.
1 minute, then switch back on.
➤
Select a programme.
➤
If the fault reappears, note down the
complete error message and FN number,
then switch off mains supply once more.
➤
Call Customer Services.
… U1 see instructions
FNXXX XXXXXX
E42
appears
Possible cause
Solution
• Over-voltage
➤
Cancel the error message by pressing the
button.
➤
Switch mains supply off for approx.
1 minute, then switch back on.
➤
Select a programme.
➤
If the fault reappears, note down the
complete error message and FN number,
then switch off mains supply once more.
➤
Call Customer Services.
… Insert filter in door
appears
Close appliance door
Possible cause
Solution
• The door filter is missing.
➤
Insert the door filter and ensure it is
positioned correctly.
• The appliance door is
open.
➤
Close the appliance door.
52
7 Trouble-shooting
… Insert base cassette
appears
with filter in base
Possible cause
Solution
• The following parts in the
appliance have not been
inserted properly:
➤
Insert parts correctly.
➤
Close the cover.
– Cassette in base
– Mesh filter in base
– Filter mat
… it is not possible to select a new programme after closing the appliance
door
Possible cause
Solution
• A programme was
interrupted.
➤
Press the
➤
Select a new programme.
button.
… the appliance will not start
Possible cause
Solution
• The appliance door is
open.
➤
Close the appliance door.
• The door filter is missing.
➤
Insert the door filter and ensure it is
positioned correctly.
• The cassette in base is
missing.
➤
Insert the cassette in base.
• An interruption in the
power supply.
➤
Plug in at the mains.
➤
Turn the mains switch on.
➤
Check the fuses.
53
7 Trouble-shooting
… the washing is not dry enough
Possible cause
Solution
• The load contains
different types of fabric.
➤
Select a longer programme.
➤
Select the
➤
Change the level of dryness.
➤
Plug in at the mains.
➤
Turn the mains switch on.
➤
Check the fuses.
• The moisture sensor is
dirty.
➤
Clean the moisture sensor.
• The demonstration mode
is activated.
➤
Pull out and replace the mains connector
plug and then plug it in again.
If «Demonstration mode» shows, clear this
with appliance door open and button
combination
,
and
.
• An interruption in the
power supply.
MIN.
programme.
… the programme takes significantly longer than indicated in the display
Possible cause
Solution
• The following parts in the
appliance could be
blocked:
➤
Check and, if necessary, clean the parts.
• Very wet washing.
➤
Spin washing at a higher speed.
• The ambient temperature
is too high.
➤
Improve the ventilation of the room.
– Door filter
– Mesh filter in base
– Filter mat
54
7 Trouble-shooting
… the washing is charged with static electricity
Possible cause
Solution
• Wash items that are made Static charge is a normal characteristic of
of man-made fibres.
man-made fibres and nothing to do with the
appliance.
… the duration remaining indicator remains frozen for a longer period
Possible cause
Solution
• Not reached the level of
dryness required.
➤
This is not a malfunction. No action is
necessary. Once the level of dryness
required is reached, the duration remaining
indicator will run automatically again.
• The wash load is very
mixed (especially with
heavier textiles).
➤
This is not a malfunction. No action is
necessary. The duration remaining
indicator will run automatically in a while.
• Build-up of fluff in filters.
➤
Clean the filters.
55
8
Drying tips
8.1
Fabric care symbols
To select the right drying programme, follow the fabric care symbols on
garment labels.
Tumble dry, medium heat
Tumble dry, low heat
Do not tumble dry
General tips
• For the wash you are recommended not to use fabric conditioners or other
fabric care solutions, otherwise comply with the manufacturer’s instructions. Tumble drying automatically leaves fabrics soft and fluffy.
• The use of fabric conditioner in the wash can lead over time to the
formation of a thin, barely visible film in the drum and on the moisture
sensors. This can cause a malfunction resulting in the washing not being
dried to the level of dryness required.
• Use tumbler dryer sheets sparingly.
• Protect items of washing from getting damaged.
➤
Fasten duvet and pillow cases, hook and eye fasteners and zips.
➤
Fasten cloth belts and apron ties.
• Only put a few items of washing in the drum when drying fabrics that
crease easily.
• When drying bulky items (e.g. sleeping bags, duvets, etc.) strictly follow the
fabric care symbols.
56
8 Drying tips
• Woollen and silk fabrics often carry the «Do not tumble dry» label.
➤
For woollen and silk fabrics, follow the fabric care symbols on garment
labels.
➤
Press the
button and select the relevant programme.
• For easy-care fabrics (e.g. shirts and cotton mixed fabrics), additionally
select the
easy care function and put only a few items in the drum.
• Knitted and woven items (e.g. T-shirts) tend to shrink. Additionally select
the
easy care function.
• Items of clothing with metal fasteners (e.g. overalls) should be tumble dried
using the additional
timed drying programme. The metal fasteners
could cause the washing to be overdried in an automatic programme.
MIN.
Energy saving tips
• Well-spun washing requires a shorter drying time and saves energy.
➤
Spin washing well before tumble drying. Tumble drying largely removes
creases that come from spinning in the washing machine.
• Dirty fluff mesh filters and filter mats reduce the air flow rate when drying
and result in longer drying times and a high energy consumption.
➤
Fluff mesh filters and filter mats must be cleaned regularly in accordance
with the operating instructions.
• The maximum capacity of the relevant programme should be used to its
full extent.
• Small, light wash items dry more quickly; different materials can have
different drying durations.
➤
Sort items according to type and size to avoid over-drying of individual
items.
57
9
Spare parts
Please give model number and exact description when ordering parts.
Door filter
Mesh filter in base
Filter mat in base mesh filter
(2 items)
Cassette in base
for mesh filter in base and filter mat
58
10
Technical data
Dimensions
Height:
85 cm
Width:
60 cm
Depth:
60 cm
Weight:
65 kg
Dry load capacity:
6 kg
Ambient conditions
Permissible room temperatures
when appliance in operation
5 °C to 35 °C
Electrical connection
➤
See identification plate
59
10 Technical data
10.1 Notes for testing institutes
➤
The correct determination of the declaration data is given with wash item
after an intake phase of 5 complete drying programmes (Automatic
programme: Normal drying
).
➤
Wash the base mesh filter in the base cassette after every drying
programme.
➤
The moisture sensor is calibrated based on average water hardness levels.
To adjust the water conductivity value of the appliance according to the
norm (0.45 mmol/l), set the level of dryness to «4» in the user settings.
Set to standard programme according to AS/NZS 2442:
• Cotton, normal dry, 6 kg load capacity
➤
Press the
button.
10.2 Automatic energy-saving standby
The appliance is equipped with automatic stand-by to avoid consuming
energy unnecessarily.
The appliance door must be kept closed to obtain the lowest standby current
consumption.
All displays go out within minutes of a programme finishing. Energy
consumption is reduced to an absolute minimum. The safety functions,
however, remain activated.
60
11
Disposal
Packaging
• All packaging materials (cardboard, plastic film (PE) and polystyrene
(EPS)) are marked and should, if possible, be collected for recycling and
disposed of in an environmentally friendly way.
Disconnection
• Disconnect the appliance from the mains. With a fixed appliance, this is to
be carried out by a qualified electrician!
Safety
• Disable the appliance to prevent accidents caused by improper use,
especially through children playing.
• Pull the plug out of the mains socket or have the appliance disconnected
from the mains by a qualified electrician. Then cut off the mains cable.
• Remove or disable the lock on the appliance door.
Disposal
• The old appliance should not be discarded as worthless rubbish. If
disposed of correctly, the raw materials can be recovered for recycling.
• The
symbol on the identification plate warns that the appliance may
not be disposed of in normal household waste.
• The appliance must be disposed of in accordance with local regulations
on waste disposal. For more information on the handling, disposal and
recycling of the product, please contact the local authorities, the local
recycling facilities for household waste or the retailer from whom you
purchased the appliance.
Note on heat pump
This appliance is CFC-free (the refrigeration cycle contains R134a).
61
12
62
Notes
12 Notes
63
13
Index
A
Additional functions. . . . .
Additional programme. . .
Airing. . . . . . . . . . . . . . . .
Ambient conditions . . . . .
Appliance
Construction . . . . . . . . .
Description . . . . . . . . . .
Loading. . . . . . . . . . . . .
Automatic energy-saving
standby . . . . . . . . . . . . . .
Automatic programmes. .
Selecting . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
14,
...
19,
...
24
14
22
59
. . . . . . . 13
. . . . . . . 12
. . . . . . . 35
. . . . . . . 60
. . . . 14, 20
. . . . . . . 37
B
Baby garments . . . . . . . . . . . . . . . 22
Base cassette
Cleaning . . . . . . . . . . . . . . . . . . . 47
C
Care . . . . . . . . . . . . . . . . . . . .
Changing selection . . . . . . . . .
Childproof lock . . . . . . . . . . . .
Cleaning
Base cassette . . . . . . . . . . . .
Door filter . . . . . . . . . . . . . . .
Filter mat. . . . . . . . . . . . . . . .
Filter mat in base mesh filter.
Mesh filter in base. . . . . . . . .
Moisture sensor . . . . . . . . . .
Cleaning intervals . . . . . . . . . .
Contrast . . . . . . . . . . . . . . . . .
Cool down. . . . . . . . . . . . . . . .
Crease guard . . . . . . . . . . . . .
Crease guard programme. . . .
64
. . . 44
. . . 39
32, 41
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
47
46
48
48
47
49
44
33
19
19
22
D
Damp . . . . . . . . . . . . . . . . . .
Delayed start. . . . . . . . . . . . .
Selecting. . . . . . . . . . . . . . .
Denim . . . . . . . . . . . . . . . . . .
Dimensions . . . . . . . . . . . . . .
Disconnection . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . .
A0 Check outlet . . . . . . . . .
A3 Moisture sensor clean . .
A9 Mesh and filter clean. . .
Close appliance door . . . . .
F.. see instructions . . . . . . .
Insert filter in door. . . . . . . .
Insert filter mat . . . . . . . . . .
U1 see instructions . . . . . . .
Display elements. . . . . . . . . .
Disposal . . . . . . . . . . . . . . . .
Door filter
Cleaning . . . . . . . . . . . . . . .
Down . . . . . . . . . . . . . . . . . .
Drying . . . . . . . . . . . . . . . . . .
Timed . . . . . . . . . . . . . . . . .
Drying tips. . . . . . . . . . . . . . .
Duration remaining indicator .
Frozen. . . . . . . . . . . . . . . . .
E
Easy care . . . . . . . . . . . . .
Error messages . . . . . . . .
A9 Mesh and filter clean.
Extra dry . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
20
24
39
22
59
61
15
50
51
51
52
52
52
53
52
14
61
.
.
.
.
.
.
.
....
....
19,
....
....
....
....
46
22
35
38
56
36
55
.
.
.
.
24,
....
45,
....
38
50
51
20
13 Index
F
Fabric care symbols
Fabric conditioners .
Fabric types . . . . . . .
Factory settings . . . .
Favourites . . . . . . . .
Changing. . . . . . . .
Defining . . . . . . . . .
Deleting . . . . . . . . .
Starting . . . . . . . . .
Filter mat
Cleaning . . . . . . . .
Finished washing for
First time using . . . .
Fluff . . . . . . . . . . . . .
Fluffing. . . . . . . . . . .
Function test . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
...
the
...
...
...
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
..
..
..
..
20,
...
...
...
...
56
56
22
34
25
26
25
27
26
....
day .
....
....
....
....
.
.
.
.
.
.
.
.
.
.
.
.
48
43
16
45
22
16
.
.
.
.
.
.
.
.
.
.
.
.
N
Normal dry. . . . . . . . . . . . . . . . . . . 20
Notes for testing institutes . . . . . . . 60
O
Operating elements . . . . . . . . . . . . 14
P
Packaging . . . . . . . . . . .
Plain text display . . . . . .
Preparing the appliance
Programme
Aborting. . . . . . . . . . . .
End . . . . . . . . . . . . . . .
Interrupting . . . . . . . . .
Overview . . . . . . . . . . .
Selection . . . . . . . . . . .
Sequence . . . . . . . . . .
. . . . . . . . 61
. . . . . . . . 15
. . . . . . . . 35
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
40
43
40
19
36
19
H
Hygiene . . . . . . . . . . . . . . . . . . . . . 22
Q
Quick instructions . . . . . . . . . . . . . 68
I
Identification plate . . . . . . . . . . . . . 67
Indicator lights . . . . . . . . . . . . . . . . 15
Iron dry . . . . . . . . . . . . . . . . . . . . . 20
R
Repair service . . . . . . . . . . . . . . . . 67
Room temperature . . . . . . . . . . . . 59
L
Language. . . . . . . . .
Language selection .
Leisurewear . . . . . . .
Level of dryness. . . .
Levels of brightness.
M
Maintenance . . . . .
Mesh filter in base
Cleaning . . . . . . .
Model no.. . . . . . . .
Moisture sensor
Cleaning . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
30
18
22
31
33
. . . . . . . . . . . . 44
. . . . . . . . . . . . 47
............. 2
. . . . . . . . . . . . 49
S
Safety . . . . . . . . . . . . . . . . . . .
Safety precautions
Before using for the first time
Children in the home. . . . . . .
Correct use . . . . . . . . . . . . . .
Maintenance . . . . . . . . . . . . .
Note on use. . . . . . . . . . . . . .
Transport . . . . . . . . . . . . . . . .
Shirts . . . . . . . . . . . . . . . . . . . .
Silk . . . . . . . . . . . . . . . . . . . . .
Spare filter mat . . . . . . . . . . . .
Spare parts . . . . . . . . . . . . . . .
Symbols. . . . . . . . . . . . . . . . . .
. . . 61
.
.
.
.
.
.
.
.
... 6
... 9
... 6
. . 11
. . 10
... 5
. . 22
. . 22
44, 48
. . . 58
.... 2
65
13 Index
T
Technical data. . . . . .
Testing institutes
Notes . . . . . . . . . . .
Timed drying . . . . . . .
Selecting . . . . . . . . .
Tips . . . . . . . . . . . . . .
Transport. . . . . . . . . .
Tumbler dryer sheets
Type . . . . . . . . . . . . .
. . . . . . . . . . 59
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
60
20
38
56
..5
56
..2
U
Ultra care . . . . . . . . . . . . . . . . 24, 38
User settings . . . . . . . . . . . . . . . . . 28
Using for the first time . . . . . . . . 6, 16
66
V
Validity . . . . . . . . . . . . . . . . . . . . . . . 2
W
Washing
Unloading . . . . . . . . . . . . . . . . . . . 43
WetClean . . . . . . . . . . . . . . . . . . . . 20
Woollens . . . . . . . . . . . . . . . . . . . . . 20
14
Repair service
The TROUBLE-SHOOTING section will help you to carry out small
repairs yourself, saving you the time and trouble of calling out a
service technician and the cost that goes along with it.
Whether you contact us about a malfunction or an order, please always state
the serial number (FN) and the model type of your appliance. Enter these
details below and also on the service sticker which comes with the appliance.
Stick it in a conspicuous place or in your telephone or address book.
FN
Appliance
You will also find the same details on the certificate of guarantee, the original
sales invoice and the identification plate of the appliance.
➤
Open the appliance door.
➤
Open the cover.
– The identification plate is located bottom right.
67
Quick instructions
Please first read the safety precautions in the operating instructions!
➤
Open the appliance door
➤
Check the door filter
➤
Load the washing
➤
Close the appliance door
➤
Select programme
➤
Select any additional functions, if required
➤
The appliance starts automatically after 20 seconds
After the programme has finished:
➤
Unload the dry washing when the indicator light for the
➤
Clean the door filter
➤
Close the appliance door
button flashes
When you have finished washing for the day:
➤
Clean the door filter
➤
Check the mesh filter in base and the cassette in base and clean it if
necessary
➤
Close the appliance door
V-ZUG Ltd
Industriestrasse 66, CH-6301 Zug
vzug@vzug.ch, www.vzug.com
J959.360-2