Caraudio-Systems USB-MK-AUX Specifications

usbLOGiC USB-AV-Player
USB-MK-AUX
for BMW Professional navigation systems
without iDrive (MK2-MK4)
Product features
• USB-port for media up to 2 TB (2000GB)
• supports FAT32 and NTFS formatted media
• multi partition capable
• compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more
• last position memory
• integrated into and controllable by vehicle infotainment
• AV-input with IR-control channel
• control of after-market devices by OEM buttons, e.g. DVD-player, USB/iPod devices, …
• after-market rear-view camera input
• automatic switching to rear-view camera input
• rear-view camera power (+12V max 1A)
• rear-seat-entertainment AV-output
• optional remote control for full USB functions/rear-seat-entertainment
• power on remote out trigger signal (+12V max 1A) to switch on connected devices
• video-in-motion
Version 15.01.2013
DVB-MK-AUX
Contents
1. Prior to Installation
1.1.
1.2.
Delivery contents
Check compatibility of vehicle and accessories
2. Connection schema
3. Installation
3.1.
3.2.
3.3.
3.4.
3.5.
3.5.1.
3.5.2.
3.5.3.
3.5.4.
3.6.
3.6.1.
3.6.2.
3.6.3.
Interconnecting USB-box and harnesses
Connections to the navigation computer or – if existing – to the TV-tuner
Connections to radio module
USB and optional IR-remote control set
Connecting peripheral devices
AV-source
Installing AV-source’s IR-sensor additionally
After-market rear-view camera
After-market rear-seat-entertainment
System settings/VI SETTINGS
Audio settings
Assigning device control for connected AV-source
Rear-view camera function
4. Operation
4.1.
4.2.
4.3.
4.4.
4.5.
Activation of the video-in-motion function
Selecting the usbLOGiC as current AV-source
Switching to internal USB and AV-source
Picture settings
Button assignment table
5. Specifications
6. Connections (USB-box)
7. Technical support
Seite
1
Appendix A – Device control table
Appendix B – USB function manual
Version 15.01.2013
DVB-MK-AUX
Legal Information
By law, watching moving pictures while driving is prohibited, the driver must not be
distracted. We do not accept any liability for material damage or personal injury resulting,
directly or indirectly, from installation or operation of this product. This product should only
be used while standing or to display fixed menus or rear-view-camera video when the
vehicle is moving, for example the MP3 menu for DVD upgrades.
Changes/updates of the vehicle’s software can cause malfunctions of the interface. We
offer free software-updates for our interfaces for one year after purchase. To receive a free
update, the interface must be sent in at own cost. Labor cost for and other expenses
involved with the software-updates will not be refunded.
1. Prior to installation
Read the manual prior to installation. Technical knowledge is necessary for installation. The
place of installation must be free of moisture and away from heat sources.
1.1.
Delivery contents
Take down the SW-version and HW-version of the interface boxes, and store this
manual for support purposes.
Harness
C3C-BMW700
Harness
C3C-AV
USB-box
USBC-M570
HW_____ SW_____
USB-installation socket USBC-EXT
If remote function for a peripheral device shall be used, additional an IR-
Seite
2
Remote cable and Y-adapter are needed, see chapter AV-source .
Version 15.01.2013
DVB-MK-AUX
1.2.
Check compatibility of vehicle and accessories
Requirements
Vehicle
3series (E46), 5series (E39), 7series (E38), X5 (E53), X3 (E83), Z4
(E85/86)
with AUX-input at the radio module (from approx 10/2002)
Navigation
Navigation system Professional without iDrive
(MK2-MK4)
Limitations
The factory audio-AUX-input is used for audio-insertion by the
dvbLOGiC. Alternative use of the AUX-input is only possible by
additional switch-box integration.
USB-port
Only for media which work with power supply by ONE single USB
connector.
After-market rear-view
camera
Compatible with NTSC-cameras only.
Seite
3
Factory-audio-AUX-input
Version 15.01.2013
DVB-MK-AUX
Seite
4
2. Connection schema
Version 15.01.2013
DVB-MK-AUX
3. Installation
Switch off ignition and disconnect the vehicle’s battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Place of installation is at the navigation computer or the factory TV-tuner (if existing and not
removed) and at the radio module.
If there is a factory TV-tuner inside the car, you have to connect the harness C3C-BMW700
to the TV-tuner and not to the navigation computer!
The radio module and navigation computer are located at the rear end for the 3series (E46),
5series (E39) and 7series (E38) on the left hand side the radio module of the 7series is
located behind lining in the car wing).
The X5 (E53) radio module is located underneath the
boot lining, next to the battery.
Seite
5
The navigation computer is located on the left hand side
behind the boot lining.
Version 15.01.2013
DVB-MK-AUX
3.1.
Interconnecting USB-box and harnesses
Plug harness C3C-AV into 6pin Molex of USB-box USBC-M570.
Plug harness C3C-BMW700 into 14pin of USB-box USBC-M570.
Seite
6
Plug female 18pin AMP connector of C3C-BMW700 into male 18pin AMP connector
of USB-box USBC-M570.
Version 15.01.2013
DVB-MK-AUX
3.2.
Connections to the navigation computer or – if existing – to the TV-tuner
If there is a factory TV-tuner inside the car, you have to connect the harness C3C-BMW700
to the TV-tuner and not to the navigation computer!
Disconnect blue female 18pin connector of vehicle harness from the back of the
navigation computer or the factory TV-tuner (if existing and not removed).
Plug blue male 18pin AMP connector of harness C3C-BMW700 into blue female 18pin
AMP connector of vehicle harness.
Plug blue female 18pin AMP connector of harness C3C-BMW700 into blue male 18pin
AMP connector of navigation computer or of the factory TV-tuner (if existing and not
removed).
Seite
7
Note: If an existing factory TV-tuner will be removed the optionally available harness CABBMW200 is necessary!
Version 15.01.2013
DVB-MK-AUX
3.3.
Connections to radio module
Vehicle female
12pin connector
Loosen the female Quadlock connector to the radio module.
Loosen the black female 12pin connector from chamber B of the
female Quadlock connector.
Vehicle female
12pin connector
Push the insert from female 12pin connector’s plastic cab
from the side.
Pin the audio cables of harness C3C-BMW700 to the
dissambled vehicle’s female 12pin connector:
Yellow cable
Blue cable
Black cable
Pin 3
Pin 4
Pin 10
If the chambers of the female 12pin connector are occupied,
isolate and remove the existing pins.
Quadlock Steckplatz
Radiomodul
Push the black plastic cap onto the female 12pin connector
and insert it into the female Quadlock connector. Reconnect
the female Quadlock connector to the radio module.
Seite
8
Vehicle female
12pin connector
Version 15.01.2013
DVB-MK-AUX
3.4.
USB and optional IR-remote control set
Connect USB-connector of USB-installation socket USBC-EXT to USB-socket of USBbox USBC-M570 and install the USBC-EXT socket in a well accessible location, e.g. the
glove-box. Make sure there is enough space to load USB-media.
Installation socket for the connection of USB-media.
The USB-IRSET consists of the external C3C-SENSOR IR-sensor and the USBC-RC IRremote control and can be used to control the usbLOGiC’s internal USB functions
additionally to the control through the navigations buttons. Connect the C3CSENSOR to the female black/red/blue 3pin AMP connector of harness C3C-BMW700
and locate the sensor in an accessible place.
3.5.
Connecting peripheral devices
Seite
Before final installation of the peripheral devices, we recommend to test-run the usbLOGiC
functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral
devices as soon as possible.
9
It is possible to connect an after-market AV-source, after-market rear-view camera and rearseat-entertainment to the usbLOGiC.
Version 15.01.2013
DVB-MK-AUX
3.5.1. AV-source
The usbLOGiC has the possibility to connect and remotely control by navigation buttons a
pre-programmed device. The device list in the device control table shows the preprogrammed remote channels and the related IR-remote cables STA-xxx which must be
ordered separately for the control of the device.
Using the respective STA-xxx IR-control cable, interconnect the yellow female 3pin
AMP connector of harness C3C-BMW700 and the IR-port of the AV-source.
Using an RCA-cable, interconnect the female RCA-port AV1 of the USB-box
USBC-M570 with the AV-output of the AV-source.
The pink ACC-output wire (+12V max. 1A) of harness C3C-BMW700 can be connected
to the ACC-input wires of the connected device to switch it on. It carries +12V when
the navigation computer is running.
3.5.2. Installing AV-source’s IR-sensor additionally
Seite
10
Additionally to the control via OEM navigation, it is possible to install the original IR-sensor
of a connected device. By using the respective Y-adapter (e.g. STA-Y35MM or STA-RJ12) for
the IR-Port of the connected device, the controls of navigation AND device’s IR-sensor can be
connected and used simultaneously. Installation of the IR-sensor is recommended as the
controls via navigation are limited, and not all functions may be covered.
Version 15.01.2013
DVB-MK-AUX
3.5.3. After-market rear-view camera
Connect the video RCA of the after-market rear-view camera to the female RCA
connector R-CAM IN of USB-box USBC-M570.
Connect the green wire of C3C-BMW700 to the camera power supply (+12V max. 1A)
The green wire is high (+12V) when reverse gear is engaged.
Note: Compatible with NTSC cameras only.
3.5.4. After-market rear-seat-entertainment
Seite
Note: As the output is a full output, not shared with the video signal for the
navigation system, splitting the video with an RCA Y-cable might give a good enough
picture for two rear-seat-entertainment monitors. If not, or if connecting more than
two monitors, use a video splitter.
11
Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector
VIDEO OUT of USB-box USBC-M570.
Version 15.01.2013
DVB-MK-AUX
3.6.
System settings/VI SETTINGS
You must make some settings in the “VI SETTINGS“ menu
to enable the usbLOGiC’s functions.
Press 3x the “MENU“ key to access the “VI
SETTINGS“ menu of the usbLOGiC.
Use the right knob to make changes
within the “VI SETTINGS“ menu.
Press 1x the “MENU“ key to exit the “VI
SETTINGS“ menu.
3.6.1. Audio settings
It is necessary to set the audio settings to "AUX" and "CD
EMU OFF“ to use the usbLOGiC.
3.6.2. Assigning device control for connected AV-source
Select control levels setup “CH2: RCxx” in the “VI
SETTINGS“ menu and assign related IR-code as described
in device control table by turning the right knob.
3.6.3. Rear-view camera function
Set the rear-view camera setting to “RVC: ON“ to use the
rear-view camera input of the usbLOGiC. After the setting
the automatic switching to rear-view camera input is
activated when reverse gear is engaged.
Seite
12
Note: After the reverse gear is disengaged, the monitor
stays on camera video until the vehicle reaches a speed of
10 km/h. To leave the camera video press the right knob.
Version 15.01.2013
DVB-MK-AUX
4. Operation
4.1.
Activation of the video-in-motion function
The video-in-motion function is permanently active without disturbing the navigation
performance.
4.2.
Selecting the usbLOGiC as current AV-source
Selecting the usbLOGiC as current AV-source is activated by pressing
the “MODE”-button (depending on the current mode of the system, it
has to be pressed several times). After the first activation the system
will switch the picture after a few seconds from usbLOGiC-video to
MODE picture switch
button
button
factory-video by itself, the audio will still sty on usbLOGiC-audio. Use
the picture switch button to select between factory-video and
usbLOGiC-video. You can leave the usbLOGiC mode by pressing the “FM” or the “MODE”
button.
Note: The IR-control channel is preset to RC-Code 09 for the optional USB-AV-port (DVBU).
4.3.
Switching to internal USB and AV-source
In usbLOGiC mode longpress station button „1” to switch to the internal DVB-T tuner or
longpress station button “2” to switch to the AV-input mode.
4.4.
Picture settings
The usbLOGiC has its own picture setting mode. In order to
enter this mode, set to “Video Set:ON“ in the “VI SETTINGS“
menu. After switching to the Video/Audio level the keys
"1 <> 4" , "2 <> 5" , "3 <> 6" can be used for picture settings.
(each with short keypress).
You can deactivate the picture setting mode
in the “VI SETTINGS“ or by turning off ignition.
Contrast
Colour saturation
Seite
13
Brightness
Version 15.01.2013
DVB-MK-AUX
4.5.
Button assignment table
Seite
14
The button assignment table shows which functions of usbLOGiC and additionally connected
devices can be executed by station buttons. Once USB or AV-input mode is activated, the
navigation button in the left column will execute the function described in the corresponding
device column. The function description equals the remote control buttons of the optional
usbLOGiC remote control or the additional device. On the additional device the writing may
vary (e.g. AV instead of Source).
Version 15.01.2013
DVB-MK-AUX
Button assignment table usbLOGiC USB-MK-AUX
Station button
1
1 long
2
2 long
3
3 long
4
4 long
TRACK +
DVB-T
tuners
DVD-player
DVD-changer
iPod®-control
Analog-tuner
AV
Selection TV/
image format
AV
Selection TV/
image format
Display
Selection TV/
image format
PLAY
Selection AV2/
Image format
PLAY
Selection AV2/
Image format
SCAN
Selection AV2/
Image format
CH -
POWER
Interface
On/Off
>>
POWER
Interface
On/Off
MUTE
→
CH +
↑
PLAY/ENTER
LAMP
↓
TRACK -
VOL +
SCAN
ADJUST
VOL CH -
CH +
TRACK +
TRACK +
CH +
INFO
DTV/RADIO
TITLE
SUBTITLE
DISPLAY
AUDIO
←
ZOOM
POWER
Interface
On/Off
>>
PBC
→
STOP
↑
PLAY
SETUP
↓
TRACK DISC
TRACK +
DISC
TITLE
SUBTITLE
DISPLAY
AUDIO
←
Interface
On/Off
EXIT
SCAN
→
EPG
↑
OK
MENU
↓
CH -
AV
Selection
TV/
image
format
PLAY
Selection
AV2/
Image
format
←
ZOOM
POWER
Interface
On/Off
>>
PBC
→
STOP
↑
PLAY
SETUP
↓
TRACK -
Selection
TV/
image
format
Selection
AV2/
Image
format
←
TEXT
Seite
15
5
5 long
6
6 long
7
8
8 long
9
10
10 long
11
11 long
12
12 long
13
13 long
Internal
USB
SOURCE
Selection
TV/
image
format
OK / PLAY
Selection
AV2/
Image
format
←
EXIT
POWER
Interface
On/Off
MEDIA
VOL +
→
VOL ↑
OK / PLAY
SETUP
↓
TRACK -
Version 15.01.2013
DVB-MK-AUX
5. Specifications
Operation voltage
Stand-by power drain
Operation power drain
Power consumption
Power rating USB-port
Temperature range
Weight
Measurements (box only) B x H x T
10.5 – 14.8V DC
<1mA
~ 500mA
~ 6W
0,5A permanent (0,8A max)
-30°C to +80°C
312g
135 x 30 x 105 mm
6. Connections (USB-box)
7. Technical Support
Caraudio-Systems Vertriebs GmbH
manufacturer/distribution
Rheinhorststr. 22
D-67071 Ludwigshafen am Rhein
NavLinkz GmbH
corporate sales/tech dealer-support
Eurotec-Ring 45
D-47445 Moers
phone +49 180 3 907050
email support@caraudio-systems.de
Seite
16
Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered
trademarks ® of their corresponding legal owners.
Version 15.01.2013
DVB-MK-AUX