Prima DV2018 Owner`s manual

COMBINATION FLAT COLOR TELEVISION
AND DVD/VCD/CD PLAYER
Owner's Manual
DV2018
DV2418
Before operating the unit, please read this manual thoroughly.
Table of Contents
Important Safety Instructions --------------------1
Getting Started ----------------------------------------3
Front ------------------------------------------------------3
Back-------------------------------------------------------4
Remote Control ----------------------------------------5
Installing batteries -------------------------------------6
Effective range of the Remote----------------------6
Installation----------------------------------------------7
Antenna connections ---------------------------------7
Cable (CATV) satellite connections ---------------8
Using an Audio Amplifier -----------------------------9
Using an AV Amplifier with
built-in digital surround -------------------------------9
Connecting AV1 inputs------------------------------10
Connecting AV2 inputs------------------------------10
TV Operation Guide
Power on/off------------------------------------------11
Turning on----------------------------------------------11
Turning off----------------------------------------------11
Select the Video Input-----------------------------12
Watching AV program -------------------------------12
Switching from AV to TV----------------------------12
Tuning --------------------------------------------------13
To enter the TUNING menu -----------------------13
Setting the TV/Cable option -----------------------13
Auto Search -------------------------------------------13
Erasing an unnecessary channel ----------------14
Fine tuning ---------------------------------------------14
Setting the Color System---------------------------15
Channel Selection ----------------------------------16
Adjusting Picture -----------------------------------17
To enter the PICTURE menu----------------------17
Adjusting picture--------------------------------------17
Selecting picture mode -----------------------------17
Setting SVM option ----------------------------------18
Setting Blue background option ------------------18
Setting Noise reducer option ----------------------18
Sound---------------------------------------------------19
Adjusting volume -------------------------------------19
To enter the SOUND menu ------------------------19
Adjusting sound --------------------------------------20
Selecting sound mode ------------------------------20
Setting S.woofer item -------------------------------20
Timer----------------------------------------------------21
To enter the TIMER menu--------------------------21
Setting Clock ------------------------------------------21
Setting Sleep timer ----------------------------------21
Setting Off Time --------------------------------------22
Setting On Time --------------------------------------22
System Setup ----------------------------------------23
To enter the SET UP menu ------------------------23
Selecting a language --------------------------------23
Menu Demo--------------------------------------------23
Setting Closed Caption(CCD)---------------------24
Selecting audio mode -------------------------------24
Recalling On-screen display ----------------------24
Parental Control-------------------------------------25
Child lock----------------------------------------------25
To enter Child lock submenu ----------------------25
Setting Child lock-------------------------------------25
Changing password ---------------------------------25
Setting V-chip ----------------------------------------26
To enter V-chip menu -------------------------------26
MPAA RATING SET-UP ----------------------------26
TV RATING SET-UP --------------------------------27
Setting individual Content Categories
for TV Rating ------------------------------------------28
CANADIAN ENGLISH RATING SET-UP-------28
CANADIAN FRENCH RATING SET-UP -------29
Changing password ---------------------------------29
DVD Operation Guide
Disc Information ------------------------------------31
Basic Playback --------------------------------------32
Using On-screen Menu ---------------------------34
Locating Desired Scene --------------------------35
Displaying Status of Disc ------------------------36
Special Functions ----------------------------------37
Zooming ------------------------------------------------37
Setting soundtrack language ----------------------37
Repeat playback -------------------------------------37
Changing Angles [DVD] ----------------------------38
Changing Subtitle languages [DVD]-------------38
Initial Settings ---------------------------------------39
GENERAL SETUP-----------------------------------39
AUDIO SETUP----------------------------------------41
VIDEO SETUP----------------------------------------42
PREFERENCE SETUP ----------------------------43
Playing Back MP3 disc ---------------------------45
PLAYBACK OPERATIONS ------------------------45
PLAY MODE selection ------------------------------46
Playing Back Kodak Picture CD ---------------47
PLAYBACK OPERATIONS ------------------------47
PLAY MODE selection ------------------------------47
Setting picture transition effects ------------------48
Zooming picture --------------------------------------48
Rotating/Mirrorring picture -------------------------48
Browsing pictures ------------------------------------48
Other Information
Setting the Universal Remote Control Unit ----49
Troubleshooting Guide------------------------------55
Reception Disturbances ----------------------------57
Specifications -----------------------------------------58
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION-These servicing instructions are for use by qualified
service personnel only. To reduce the risk of
electric shock, do not perform any servicing other
than that contained in the operating instructions
unless you are qualified to do so.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
dangerous voltage within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Before using the unit, be sure to read all operating instructions carefully. Please note that these
are general precautions and may not pertain to your particular unit. For example, this unit may not
have the capability to be connected to an outdoor antenna.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
PORTABLE CART WARNING
(symbol provided by RETAC)
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
S3126A
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
ormoisture, does not operate normally, or has been dropped.
1
Important Safety Instructions
15. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. Apparatus shall no t be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
17. If an outside antenna is connected to the product, be sure the antenna system is grounded so as to
provide some protection against voltage surges and built-up static charges. Section 810 of the
National Electric Code, ANSI/NFPA 70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge product,
size of grounding conductors, location of antenna discharge product, connection to grounding
electrodes, and requirements for grounding electrodes.
18. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
19. When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
20. Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
21. The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. Unplug the product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally after installation by following the operating
instructions. Adjust only those controls that are covered by the operating instructions, as
adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
ANTENNA
LEAD IN
f. When the product exhibits a distinct change in performance.
WIRE
23. This reminder is provided to call the Cable
GROUND
CLAMP
system installer's attention to Article 820-40
ANTENNA
of the NEC that provides guidelines for
DISCHARGE UNIT
(NEC SECTION 810-20)
proper grounding and, in particular, specifies
that the cable ground shall be connected to
ELECTRIC
GROUNDING CONDUCTORS
SERVICE
the grounding system of the building, as
(NEC SECTION 810-21)
EQUIPMENT
close to the point of cable entry as practical.
GROUND CLAMPS
NEC-NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
24. Product complies with DHHS rule 21 CFR
(NEC ART 250, PART H)
S2898A
subchapter J in effect at date of manufacture.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
CAUTION: use of any controls, adjustments, or procedures other than those specified herein may
result in hazardous radiation exposure.
WARNING: FOR CONTINUED SAFETY, REPLACE SAFETY CRITICAL COMPONENTS
ONLY WITH MANUFACTURER'S RECOMMENDED PARTS (REFER TO SERVICE
LITERATURE).
2
Getting Started
Front
(2)
VIDEO L/MONO-AUDIO-R
1
Disc tray
2
OPEN/CLOSE
3
PLAY
STOP
CH
CH+
VOL
VOL+
MENU
TV/AV
TV/DVD
4
5
6
7
8
9
10
11
12
1. AV2 inputs (VIDEO, AUDIO L/MONO, R)
2. Earphone jack
3. Open/close disc tray
4. Playback
5. Stop playback
6. Channel down select; menu item select
7. Channel up select; menu item select
8. Volume down adjust; menu item adjust
9. Volume up adjust; menu item adjust
10. Display MENU of TV
11. Video input select
12. Switch between TV/AV and DVD
13. Remote sensor
14. Power indicator (red)
15. Purple indicator
16. Power button
3
13 14
15
16
Getting Started(continued)
Back
DV2418
DV2018
1
S -VIDEO
2
VIDEO
3
DIGITAL
AUDIO
COAXIAL
L /MONO
AUDIO
R
4
OUT
1. AV1 inputs (S-VIDEO, VIDEO, AUDIO L/MONO, R)
2. Monitor outputs (VIDEO, AUDIO L/MONO, R)
3. Antenna input
4. DIGITAL AUDIO COAXIAL OUTPUT jack
4
Getting Started(continued)
Remote Control
1
2
3
4
5
6
1
SLEEP
5
2
TV/DVD
8
7
9
MUTE
3
+10
AV/SETUP
0
6
Cable/SAT
4
DVD COMBO
TV
VCR
7
SET
CH
DSP/OSD
VOL
-
VOL
11
MENU
8
+
/ZOOM
CH
STEREO/AUDIO&CH
12
9
STOP
PLAY
OPEN/CLOSE
10
13
14
15
16
17
18
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
20
19
SEARCH
RETURN
21
DVD MENU
22
23
REPEAT A-B
ENTER
24
25
SUBTITLE
TITLE
ANGLE
26
5
1. Power on/off
2. Sleep timer
3. Switch between TV/AV and DVD
4. Video input select
Display initial setup menu
5. Number buttons (Keyboard)
6. Mute the sound
7. Remote control unit selection
8. Display TV information
Display DVD information
9. Switch between present/previous channel
Zoom (DVD)
10. Open or close the DVD disc tray
11. VOL+/-: adjust volume; adjust menu item
CH+/-: Select channel; Select menu item
MENU: Display menu of TV
12. Switch the sound of TV
Change DVD language selection
13. Stop playback
14. Playback
15. Reverse playback
Chapter Back
16. Pause playback
Step playback
17. Forward/Reverse-slow motion
18. Forward playback
Chapter forward
19. Locate desired scene
20. Return to previous menu screen
21. DVD MENU: Display DVD menu
: Cursor buttons
22. Enter information in menu
23. Repeat playback between A and B
24. Change playback angle
25. Set subtitle
26. Go to DVD title menu
Getting Started(continued)
1
Important:
Your remote control has been preprogrammed. If your remote controller does not work
correctly, maybe the setting is wrong, please try the following steps.
1. Press and hold the “SET ” button, followed by the “DVD COMBO ” button at the same
time until the indicator lights up.
2. Press 1, 4, 7 buttons one by one. As a response, the indicator of the remote control
will twinkle twice, otherwise please repeat the above 2 steps.
Installing batteries
1 Slide the battery compartment cover in the direction of the arrow.
2 Install two "AAA" batteries matching the +/- polarities of the battery to the
+/- marks inside the battery compartment.
3 Replace the compartment cover.
Notes:
* Do not try to recharge batteries they are not rechargeable.
* Use only the size and type of batteries specified. Do not mix different
types of batteries together or old batteries with fresh ones.
* When the remote control will not be used for a long period of time or when
the batteries are worn out, remove the batteries.
* Do not throw the batteries into a fire. Do not drop, dampen or disassemble
the remote control. Dispose of used batteries in the specified manner.
Effective range of the Remote
Notes:
5m
* Aim the remote control at the remote sensor and press control buttons to
operate.
o
* Operate the remote control within 30 angle on either side of the remote
sensor, up to a distance of approx. 5 meters or 16 feet.
* When there is an obstacle between the TV/DVD and the transmitter, the
transmitter may not operate.
* When direct sunlight, and incandescent lamp, fluorescent lamp or any
other strong light shines on the REMOTE SENSOR of the TV/DVD, the
operation of the remote may be unstable.
6
Installation
INSTALL the unit in a room where direct light will not fall upon the screen.
Tip: Total darkness or a reflection on the picture screen may cause
eyestrain. For best results, soft, indirect lighting is recommended.
Antenna connections
OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED)
Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see
the next page.
Combination VHF/UHF
Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
VHF/UHF
75 OHM
UHF 300 Ohm
Combiner
VHF 300
OHM
UHF 300 Ohm
Combiner
VHF 75 Ohm
7
Connect the 75 ohm cable from combination VHF/UHF antenna to the
antenna jack.
OR
If your combination antenna has a 300 ohm twin-lead wire, use a 300-75
ohm matching transformer (NOT SUPPLIED).
Combination VHF/UHF
Antenna (Separate VHF and UHF 300 ohm twin-leads)
Connect the UHF twin-lead wire to a combiner (NOT SUPPLIED).
Connect the VHF twin-lead to a 300-75 ohm matching transformer (NOT
SUPPLIED). Attach the transformer to the combiner. Attach the
combiner to the antenna jack.
Separate VHF/UHF Antennas
Connect the 75 ohm cable from the VHF antenna and the UHF antenna
twin-lead wire to a combiner (NOT SUPPLIED). Attach the combiner to
the antenna jack.
NOTE: If your VHF antenna has a twin-lead wire use a 300-75 ohm
matching transformer, then connect the transformer to the combiner.
Installation (continued)
Cable (CATV)/satellite connections
This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box.
Some Cable TV companies offer "premium pay channels" in which the signal is scrambled. Descrambling these
signals for normal viewing requires the use of a descrambling device and is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable service not requiring a converter/descrambler box,
connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the
rear of the DVD Combo.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE
If you subscribe to a satellite service or a cable TV service which requires the use of a converter/
descrambler box, connect the incoming 75 ohm coaxial cable to the converter/descrambler box. Using
another 75 ohm cable, connect the output of the converter/descrambler or satellite box to the antenna jack
on the DVD Combo. Follow the connections shown below. Set the DVD Combo to the output channel of the
converter/descrambler or satellite box (usually 3 or 4) and use the converter/descrambler or satellite box to
select channels.
INCOMING
75 OHM
CATV CABLE
CONVERTER/DESCRAMBLER
OR SATELLITE BOX
75 OHM CABLE
TO DVD Combo
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE
WITH SCRAMBLED PREMIUM CHANNELS
If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and
premium channels require the use of a converter/descrambler box, you may wish to use a signal splitter
and an A/B switch box (available from the cable company or an electronic supply store). Follow the
connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled
channels on your DVD Combo. With the switch in the "A" position, tune your DVD Combo to the output of
the converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune
scrambled channels.
CONVERTER/DESCRAMBLER
INCOMING
75 OHM
CATV CABLE
75 OHM
CABLE
SPLITTER
A/B SWITCH
8
Installation
This TV set provides 2 groups of AV inputs (including S-VIDEO) and 1 group of MONITOR outputs for your
convenient connection to VCR, Camcorder, Amplifier or other equipment. Check the Owner's Manual of the
equipment to be connected as well.
Using an Audio Amplifier
Rear of TV/DVD
S -VIDEO
W
White (audio L/MONO)
R Red (audio R )
DIGITAL
AUDIO
COAXIAL
L /MONO
W
W
VIDEO
OUT
To audio (R) input
Signal
R
AUDIO
R
To audio (L) input
R
Using an AV Amplifier with built-in digital surround
Rear of TV/DVD
S -VIDEO
TV/DVD
Front
Speaker
(Right)
Subwoofer
Front
Speaker
(Left)
VIDEO
DIGITAL
AUDIO
COAXIAL
L /MONO
AUDIO
R
OUT
Coaxial digital cable
(not supplied)
Center Speaker
To Coaxial Digital
Audio Input
Surround
Speaker (Left)
Surround
Speaker
(Right)
AV Amplifier with built-in digital surround
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater System, Inc.
9
Installation (continued)
Connecting AV1 inputs
If you connect the TV/DVD to VCR or camcorder, you can select by pressing the AV/SETUP button. Press
this button repeatedly to select the desired mode. “Video 1”, “Video 2” or TV channel will display on the
screen.
In the DVD mode this button will not operate.
Rear of TV/DVD
Y Yellow (video)
W
S -VIDEO
VCR
white (audio L/MONO)
R red (audio R )
Y
VIDEO
To video
input
R
DIGITAL
AUDIO
COAXIAL
W
L /MONO
Y
To video
output
To audio
inputs
R
AUDIO
R
W
To audio
outputs
OUT
Notes:
With the AV1 input terminals, the S-VIDEO terminal takes precedence to the Video 1 input. When an S-Video
cable is plugged in the AV1 input is disabled. To view the video signal from the AV1 terminals, disconnect the
S-VIDEO connection.
Connecting AV2 inputs
Front of TV/DVD
Y Yellow (video)
W
white (audio L/MONO)
R red (audio R )
(2)
VIDEO L/MONO-AUDIO-R
Y
To video
input
W
R
To audio
inputs
Y
To video
output
W
R
To audio
outputs
10
Power on/off
Wider Hole
and Blade
AC Outlet
Turning on
Insert the AC plug (with the 2 blades) into a
1 conveniently
located AC outlet having 120V, 60Hz.
If the red indicator lights up and no picture appears, then the TV
set is in STANDBY mode. Now please follow step 2.
Polarized AC cord plug
(One blade is wider than the other)
1
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
Notes:
The AC plug supplied with the unit is polarized to help minimize
the possibility of electric shock. If the AC plug does not fit into a
non-polarized AC outlet, do not file or cut the wide blade. It is the
user's responsibility to have an electrician replace the obsolete
outlet.
To prevent electric shock, do not use a
(polarized) plug with an extension cord
receptacle or other outlet unless the blades
can be fully inserted.
In STANDBY mode, press the power button on the
2 TV
set or on the remote controller to turn on the unit.
Notes:
In STANDBY mode, you can also turn on the set by pressing the
TV/AV, Channel up/down or Volume up/down button on the
set's panel.
If there is no input signal, then a blue background appears.
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
11
ENTER
TITLE
ANGLE
Turning off
the Power
button on the remote controller
1 orPress
on the TV set to turn off the TV set.
Notes:
The TV set can turn off automatically by:
A. Sleep timer function (needs to be set in advance).
B. OFF timer function (needs to be set in advance).
Selecting the Video Input
Watching AV program
Video1
To watch video program from AV inputs, Press
1 AV/SETUP
repeatedly to select the desired mode.
Video1
1
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
TV 10
MONO
Notes:
3
2
Video2
+10
With the AV1 input terminals, the S-VIDEO terminal takes
precedence to the Video 1 input. When both S-video and AV1 cables
are connected, the S-video signal is automatically selected and the
On-screen display is "S-Video". To view the video signal from the AV1
terminals, disconnect the S-VIDEO connection.
AV/SETUP
0
Switching from AV to TV
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
When the TV set is in AV mode, there are four ways for you to switch
back to TV mode.
Press AV/SETUP repeatedly until the TV program
1 appears.
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
2 Press digit buttons to switch back to TV mode.
3 Press CH+ or CH- to switch back to TV mode.
4 Press /ZOOM to switch back to TV mode.
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
12
Tuning
To enter the TUNING menu
PICTURE SOUND TIMER TUNING SET UP
Channel
Color system
TV/Cable
Add/Erase
AFT
Fine
Auto search
Move[
]
7
AUTO
TV
Add
On
0
Adjust[
]
1 Press the MENU button.
2 Press VOL+ or VOL- to select TUNING icon.
If the TUNING icon is not present on the menu group, the
TV/DVD may be in AV mode. Press the AV/SETUP button till
TV mode appears. Press MENU again and the TUNING icon
should appear.
1
3 Press CH- to display the TUNING menu.
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
STOP
PLAY
Setting the TV/Cable option
the TUNING menu, press CH+ or CH- repeatedly
1 From
to highlight TV/Cable item.
2 Press VOL+ or VOL- to select TV or Cable.
In TV mode, the set receives antenna signals. In Cable mode the
set receives Cable TV programs. Please select:
TV: If using VHF/UHF antenna. Only channels received on
antenna can be selected.
Cable: If using Cable TV. Only channels received on cables can be
selected
OPEN/CLOSE
Auto Search
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
the TUNING menu, press CH+ or CH- repeatedly
1 From
to highlight Auto Search item.
2 Press VOL+ to start Auto Search.
All active channels will be preset and stored into the memory
automatically. After presetting, the TV will go to the channel
before the Auto Search started.
Notes:
During the process of Auto Search,
pressing the VOL- button will stop
the process and the TV will return to
the original channel when Auto
Search started.
13
18
TV
Auto memory
Stop
Tuning (continued)
Erasing an unnecessary channel
PICTURE SOUND TIMER TUNING SET UP
Channel
Color system
TV/Cable
Add/Erase
AFT
Fine
Auto search
Move[
]
7
AUTO
TV
Erase
On
0
Adjust[
1
VOL+ or VOL- to select a channel number (for
2 Press
example, channel10)
]
CH+ or CH- repeatedly to highlight Add/Erase
3 Press
item.
4 Press VOL+ or VOL- to set to Erase.
3
2
the TUNING menu, press CH+ or CH- repeatedly
1 From
to highlight Channel item.
SLEEP
5
4
Now channel 10 will be skipped when
you browse channels by the CH+ or
CH- button.
To restore a skipped channel, please
use the digit buttons to select the
skipped channel, then repeat the
above steps 3 and 4 from above and
set the Add/Erase item to Add.
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
PICTURE SOUND TIMER TUNING SET UP
Channel
Color system
TV/Cable
Add/Erase
AFT
Fine
Auto search
Move[
]
7
AUTO
TV
Erase
On
0
Adjust[
]
Fine tuning
Fine tuning is unnecessary under normal conditions. However, in areas of
inferior broadcast conditions where adjustment is necessary for a better
picture and sound, use Fine tuning.
1
From the TUNING menu, press CH+ or CH- repeatedly
to highlight Channel item.
VOL+ or VOL- to select a channel number you
2 Press
want to Fine tune (for example, channel10).
3 Press CH+ or CH- repeatedly to highlight Fine item.
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
Press VOL+ or VOL- to fine
4 tune
till the best possible
picture and sound are
obtained.
PICTURE SOUND TIMER TUNING SET UP
Channel
Color system
TV/Cable
Add/Erase
AFT
Fine
Auto search
Move[
]
7
AUTO
TV
Erase
On
0
Adjust[
]
Notes about AFT item:
The AFT can be set to On or Off. When the AFT is set to On, the TV set
will automatically tune the program frequency to provide the best
possible picture and sound.
14
Tuning (continued)
Setting the Color System
PICTURE SOUND TIMER TUNING SET UP
Channel
Color system
TV/Cable
Add/Erase
AFT
Fine
Auto search
Move[
]
7
AUTO
TV
Erase
On
0
Adjust[
If the picture color is abnormal, maybe the color system setting is wrong.
You can select a proper color system as follows.
the TUNING menu, press CH+ or CH- repeatedly
1 From
to highlight Color System item.
]
VOL+ or VOL- to select
2 Press
a proper color system.
The color system switches between
AUTO, NTSC358 and NTSC443.
1
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
15
ENTER
TITLE
ANGLE
PICTURE SOUND TIMER TUNING SET UP
Channel
Color system
TV/Cable
Add/Erase
AFT
Fine
Auto search
Move[
]
7
NTSC443
TV
Erase
On
0
Select[
]
Channel Selection
TV 10
Mono
1 Use 0~9 digit buttons and the --/---/+10 button
To select one-digit channel:
Press one of the 0-9 digit buttons and wait for 2 seconds.
To select two-digit channel:
Input the channel using the digit buttons. Be sure to enter the
channel within 2 seconds.
To select three-digit channel:
1
3
2
SLEEP
5
4
6
Press the "--/---/+10” button to display "1--".
Press two digit buttons to input the remaining two digits of the
channel. For example, to select channel 124, press "--/---/+10”,
press 2, then press 4.
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
Press the CH+ button, the channel number increases;
Press the CH- button, the channel number decreases.
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
2 Use the CH+ or CH- button
MENU
+
3 Use the
/ZOOM button
Press this button to switch between the current channel and the
previous channel.
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
16
Adjusting Picture
To enter the PICTURE menu
PICTURE SOUND TIMER TUNING SET UP
Contrast
Brightness
Color
Sharpness
Tint
Picture mode
More
Move[
]
100
70
70
50
00
Sports
Adjust[
1
]
Adjusting picture
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
1 Press the MENU button.
2 Press VOL+ or VOL- to select PICTURE icon.
3 Press CH- to display the PICTURE menu.
+
the PICTURE menu,
1 From
repeatedly to select item.
2 Press VOL+ or VOL- to adjust.
press CH+ or CH-
Item
VOL-
VOL+
Contrast
Brightness
Color
Sharpness
Tint
Minus
darker
paler
softer
purplish
Plus
lighter
deeper
sharper
greenish
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
Selecting picture mode
the PICTURE menu, press CH+ or CH- repeatedly
1 toFrom
select Picture Mode item.
2 Press VOL+ or VOL- to select.
There are three preset picture modes (Sports, Standard and Movie) and
one user-set picture mode (Personal).
Each preset mode has its own picture settings (Color, Brightness,
Contrast, Sharpness and Tint).
Sports: Select for a bright picture.
Standard: Select for a standard picture.
Movie: Select for a finely detailed picture.
Adjusted settings are stored in Personal mode.
17
Adjusting Picture (continued)
Auto search/Manual search/Channel skip/Fine tuning
Setting SVM option
PICTURE SOUND TIMER TUNING SET UP
More
SVM
Blue back
Noise reducer
Move[
]
Off
On
On
Adjust[
the PICTURE menu, press CH+ or CH- repeatedly
1 toFrom
select SVM item.
2 Press VOL+ or VOL- button to adjust.
This function helps to improve the quality of picture.
You can switch between Off, Soft, Mild and Hard.
]
Notes:
Model DV2018 does not have the "SVM" function.
1
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Setting Blue background option
the PICTURE menu,
1 From
press CH+ or CH- repeatedly to
select Blue Back item.
VOL+ or VOL- to select
2 Press
On or Off.
Cable/SAT
DVD COMBO
VCR
SET
DSP/OSD
VOL
VOL
-
MENU
/ZOOM
STOP
]
Off
On
On
Adjust[
]
If the Blue Back is set to On, the TV
set will display a blue background
when there is no input signal.
+
CH
STEREO/AUDIO&CH
More
SVM
Blue back
Noise reducer
Move[
TV
CH
PICTURE SOUND TIMER TUNING SET UP
PLAY
Setting Noise reducer option
OPEN/CLOSE
the PICTURE menu, press CH+ or CH- repeatedly
1 toFrom
select Noise reducer function.
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
VOL+ or VOL- button to
2 Press
select On or Off.
This function is useful when the
picture is snowy because of a poor
signal.
If the Noise reducer is set to On,
the picture will be improved.
PICTURE SOUND TIMER TUNING SET UP
More
SVM
Blue back
Noise reducer
Move[
]
Adjust[
Off
On
On
]
18
Sound
Adjusting volume/Muting the Sound
Adjusting volume
1 Use the VOL+ or VOL- button.
Volume
Press VOL+, the volume increases;
Press VOL-, the volume decreases.
The minimum volume is 0 and the maximum volume is 100.
50
2 Use the MUTE button.
1
If you want to mute the sound, press
the MUTE button on the remote.
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
To resume the sound, press this button
again.
Notes:
You can also resume the sound by pressing the VOL+ or VOL- button.
0
To enter the SOUND menu
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
CH- to
3 Press
SOUND menu.
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
19
ENTER
TITLE
1 Press the MENU button.
VOL+ or VOL- to select
2 Press
SOUND icon.
ANGLE
PICTURE SOUND TIMER TUNING SET UP
Bass
Treble
Balance
Sound mode
S.woofer
59
69
00
Personal
On
display the
Move[
]
Adjust[
]
Sound (Continued)
Adjusting sound
PICTURE SOUND TIMER TUNING SET UP
Bass
Treble
Balance
Sound mode
S.woofer
Move[
]
59
69
00
Personal
On
Adjust[
]
the SOUND menu, press CH+ or CH- repeatedly
1 From
to select item.
2 Press VOL+ or VOL- to adjust.
Item
VOL-
VOL+
Bass
Treble
Minus
Minus
decreases the
right channel
Plus
Plus
decreases the
left channel
Balance
1
3
2
SLEEP
5
4
6
Selecting sound mode
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
select Sound Mode item.
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
the SOUND menu, press
1 From
CH+ or CH- repeatedly to
STOP
PLAY
OPEN/CLOSE
2 Press VOL+ or VOL- to select.
PICTURE SOUND TIMER TUNING SET UP
Bass
Treble
Balance
Sound mode
S.woofer
Move[
]
59
69
00
Personal
On
Adjust[
]
There are two preset sound modes (News, and Music) and
one user-set sound mode (Personal).
Each preset mode has it's own sound settings (Bass, Treble, and
Balance).
News: Select for a speech or conversation program.
Music: Select for a music program.
The adjusted settings are stored in Personal mode.
Setting S.woofer item
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
the SOUND menu, press CH+ or CH- repeatedly
1 From
to select S. woofer item.
VOL+ or VOL- to set On
2 Press
or Off.
PICTURE SOUND TIMER TUNING SET UP
Bass
Treble
Balance
Sound mode
S.woofer
Move[
]
59
69
00
Personal
On
Adjust[
]
20
Timer
To enter the TIMER menu
PICTURE SOUND TIMER TUNING SET UP
Off Time
Off
AM 12:00
Off
AM 12:00
2
TV
AM 8:00
On Time
Channel
TV/Cable
Clock
Move[
]
Select[
]
1 Press the MENU button.
2 Press VOL+ or VOL- to select TIMER icon.
3 Press CH- to display the TIMER menu.
Setting Clock
1
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
2 Press VOL+ or VOL- button to set the current time.
AV/SETUP
0
Cable/SAT
the TIMER menu, press CH+ or CH- repeatedly
1 From
to select CLOCK.
Notes:
DVD COMBO
TV
VCR
Before setting the Off Time or On Time, first set the clock.
If you disconnect the AC plug, the clock will reset. Please set the
clock after disconnecting power.
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
Setting Sleep timer
CH
STEREO/AUDIO&CH
STOP
PLAY
OPEN/CLOSE
You can quickly set the sleep timer by using the SLEEP button on
the remote control. With every press of this button the sleep time
changes as follows:
OFF
REW/PREV
SR/SF
110 Min.
20 Min.
10 Min.
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
120 Min.
ENTER
TITLE
ANGLE
For example, you would like the TV to
turn off in 60 minutes, you can press
the SLEEP button repeatedly until the
screen displays 60 min.
To cancel the sleep timer, you can
press the SLEEP button repeatedly
until "Off" is displayed on the screen.
Sleep:60 Min.
Notes:
When there is no video input signal for 15 minutes, the TV set
automatically goes to STANDBY mode.
21
Timer(continued)
Setting Off Time
PICTURE SOUND TIMER TUNING SET UP
Off Time
Once
10:00PM
Once
6:00PM
2
TV
8:00AM
On Time
Channel
TV/Cable
Clock
Move[
]
Select[
1
Every, this occurs every day. To cancel this function, set OFF TIME
to Off.
]
3 Press CH- .
Press VOL+ or VOL- to set the OFF time. The TV will
4 turn
off at the designated time.
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
the TIMER menu, press CH+ or CH- repeatedly
1 From
to select OFF TIME.
Press VOL+ or VOL- to select Once or Every. If you set
2 OFF
TIME to Once, this occurs only once; If you set OFF TIME to
ANGLE
Notes:
You must first set OFF TIME to Once or Every. When you are setting the
time by the VOL+/- button, if you press and hold , the time will increase
or decrease by 10 minutes.
Setting On Time
the TIMER menu, press CH+ or CH- repeatedly
1 From
to select ON TIME.
VOL+ or VOL- to select Once or Every. If you
2 Press
set ON TIME to Once, this function occurs once. If you set ON
TIME to Every, this occurs every day. To cancel this function, set
ON TIME to Off.
3 Press CH- .
VOL+ or VOL- to set the
4 Press
ON time. Press and hold to
increase/decrease by 10
minutes.
PICTURE SOUND TIMER TUNING SET UP
Off Time
On Time
Channel
TV/Cable
Clock
Move[
]
Once
10:00PM
Once
6:00PM
2
TV
8:00AM
Select[
]
5 Press CH- to select Channel item.
6 Press VOL+ or VOL- to select a channel number.
7 Press CH- to select TV/Cable.
8 Press VOL+ or VOL- to select TV or Cable.
Notes:
If the television automatically turns on and receives no user input
(volume adjustment, etc.) for two hours, it will automatically turn
off to conserve power. You must set ON TIME to Once or Every
prior to setting the time.
22
System Setup
To enter the SET UP menu
PICTURE SOUND TIMER TUNING SET UP
Language:
ENGLISH
FRANCAL
ESPANOL
Menu Demo:
Child lock menu:
More
Move[
]
Stop
Confirm[ ]
1 Press the MENU button.
2 Press VOL+ or VOL- to select SETUP icon.
3 Press CH- to display the SETUP menu.
Selecting a Language
1
3
2
SLEEP
5
4
6
the SETUP menu, press CH+ or CH- repeatedly
1 From
to select an on-screen display language.
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
2 Press the VOL+ to confirm.
There are three OSD languages on this TV set: English, French
and Spanish.
DVD COMBO
TV
VCR
SET
CH
Menu Demo
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
PICTURE SOUND TIMER TUNING SET UP
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
23
ENTER
TITLE
the SETUP menu, press CH+ or CH- repeatedly
1 From
to select MENU DEMO item.
2 Press the VOL+ or VOL- to start.
ANGLE
Language:
ENGLISH
FRANCAL
ESPANOL
Menu Demo:
Child lock menu:
More
Move[
]
Start
Confirm[ ]
System Setup(continued)
Setting Closed Caption (CCD)
PICTURE SOUND TIMER TUNING SET UP
More
Closed Caption
Vchip password
Move[
]
OFF
Select[
1
2
From the SETUP menu, press CH+ or CH- repeatedly
to select Closed Caption item.
Press the VOL+ or VOL- to select.
You can select the caption data channel (C1/C2/C3/C4), the text
service channel (T1/T2/T3/T4) or turn off Closed Captioning (Off).
]
Notes:
1
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
1.Some TV programs may not be broadcast with closed caption
signals, and therefore, the TV will not be able to display captions.
Also, text information is not offered by all stations.
2.Some TV programs only provide one channel caption, one
channel text , or only caption without text.
MENU
Selecting audio mode
If the program you are watching is "STEREO" or "SAP", you can
change the audio mode by using the STEREO/AUDIO&CH button on
the remote control. The audio mode changes as follows.
MONO
STEREO (If the audio is STEREO)
MONO
SAP
MONO
STEREO
(If the audio is SAP)
SAP (If the audio is
STEREO & SAP)
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
Recalling On-screen display
You can press the DSP/OSD button on the
remote control to display the On-screen
display.
Press DSP/OSD once and the channel
and audio mode are displayed for a brief
time. Press DSP/OSD before the display
disappears, and the time will display. To
cancel the on-screen display, press the
DSP/OSD again or wait for it to
automatically disappear.
AM 10:00
TV 10
MONO
ANGLE
24
Parental Control
Child lock
To enter Child lock submenu
PICTURE SOUND TIMER TUNING SET UP
Language:
ENGLISH
FRANCAL
ESPANOL
Menu Demo:
Child lock menu:
More
Move[
]
Stop
the SETUP menu, press CH+ or CH- repeatedly
1 toFrom
select Child lock.
Input a password for the Child
2 lock
menu.
PICTURE SOUND TIMER TUNING SET UP
Number[0-9]
The default password to enter the Child
lock menu is 0000 and you can change
it in the Child lock submenu.
1
SLEEP
5
6
TV/DVD
7
8
9
MUTE
+10
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
]
From the Child lock submenu, press CH+ or CHrepeatedly to select Channel.
2
3
4
5
6
Press VOL+ or VOL- to select a channel you want to
lock.
Press CH- to select TV/Cable.
Press VOL+ or VOL- to select TV or Cable.
Press CH- to select Child Lock.
Press VOL+ or VOL- to select ON or OFF.
Now the Child lock is active. When you select a locked channel, a
blue box appears with the following: "Notice: child lock function
active".
Changing password
RETURN
the Child lock submenu,
1 From
Press CH+ or CH- repeatedly to
DVD MENU
REPEAT A-B
select New password item.
ENTER
TITLE
ANGLE
2
Input a new password by using
0-9 digit buttons. Press MENU
button to confirm after you finish
inputting the new password.
PICTURE TIMER TUNING SET UP
Channel:
TV/Cable:
Child lock:
New password:
Move[
Important:
Be sure to write down your password and retain it for future use.
If you forget the password, press 4 3 2 1 in order to access the Child lock submenu.
25
Select[
1
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
SUBTITLE
]
Setting Child lock
AV/SETUP
0
Cable/SAT
Move[
5
TV
0n
3
2
4
Channel:
TV/Cable:
Child lock:
New password:
]
5
TV
0n
Number[0-9]
Parental Control(Continued)
Setting V-chip
To enter V-chip menu
PICTURE SOUND TIMER TUNING SET UP
MPAA RATING
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
BLOCK
ON
NEW PASSWORD
Move[
]
Select[
]
V-Chip enables parents to prevent their children from watching
inappropriate material on TV. V-Chip reads the ratings for
programming (except for news, sports, unedited movies on premium
cable and Emergency System signals ), then denies access to
programming if the program's rating meets the limitations you select.
the SETUP menu, press CH+ or CH- repeatedly
1 toFrom
select VCHIP PASSWORD.
digit buttons (0-9) to enter a
2 Use
password (the preset password
More
Closed Caption
Vchip password
1
is 0000).
3
2
SLEEP
5
4
OFF
6
To enable the V-chip, set BLOCK to
ON in the V-chip menu.
Move[
]
Number[0-9]
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
IMPORTANT: The password can be
changed later by entering the original
password and following the above steps.
MPAA RATING
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
BLOCK
ON
New password
Move[
Cable/SAT
DVD COMBO
TV
VOL
VOL
/ZOOM
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
SUBTITLE
ENTER
TITLE
Rating guidelines are provided by broadcast stations. Most television
programs and television movies can be blocked by TV Rating and/or
Individual Categories. Movies that have been shown at the theaters or
direct-to-video movies use the Movie Rating System (MPAA) only.
the V-chip submenu, press CH+ or CH- repeatedly
1 toFrom
select MPAA RATING.
VOL+ or VOL- to enter into MPAA RATING sub2 Press
menu.
3 Use CH+ or CH- repeatedly to select the desired
rating.
DVD MENU
REPEAT A-B
MPAA RATING SET-UP
+
CH
REW/PREV
]
VCR
DSP/OSD
MENU
STEREO/AUDIO&CH
Select[
SET
CH
-
]
ANGLE
VOL+or VOL- button to
4 Press
block a rating (" " will appear),
or unblock ("
" will appear).
Movie Ratings:
* Unblocked
* G and Above (general audience)
* PG and Above (parental guidance suggested)
* PG-13 and Above (13 years and up)
* R and Above (restricted)
* NC-17 and Above (18 years and up)
* X (adult)
N/A
G
PG
PG-13
R
NC-17
X
Move[
]
Select[
]
26
Parental Control
Setting V-chip
TV RATING SET-UP
PICTURE SOUND TIMER TUNING SET UP
NONE
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
CONTENT
Move[
F
]
V
S
L
Select[
1
D
]
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
TV Parental Guidelines may have one or more letters added to the
basic rating to let parents know when a show contains higher levels of
violence, sex, adult language or suggestive dialogue:
1
From the V-chip submenu, press
CH+ or CH- repeatedly to select TV
PARENTAL GUIDELINES.
2
Press VOL+ or VOL- to enter
into TV PARENTAL GUIDELINES
sub-menu.
3
4
TV
TV-G
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
TV-PG
CH
STEREO/AUDIO&CH
STOP
PLAY
OPEN/CLOSE
TV-14
TV-MA
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
Select[
US TV PROGRAMS RATINGS: (Chart 2)
DVD MENU
SUBTITLE
27
ENTER
TITLE
ANGLE
" will
FOR ALL CHILDREN:
Content specifically geared to young viewers ages 2-6.
FOR AGE 7 AND OLDER:
May contain mild physical or comedic violence which may
frighten children under 7.
GENERAL AUDIENCE:
Contains little or no violence, strong language, or sexual dialogue
or Situations.
PARENTAL GUIDANCE:
May contain infrequent coarse language, limited violence, some
suggestive sexual dialogue and Situations.
PARENTS CAUTIONED:
May contain sophisticated themes, sexual situations, strong
language, and more intense violence.
MATURE AUDIENCE:
May contain mature themes, profane language, graphic
violence, and Sexual situations.
RETURN
REPEAT A-B
]
US TV PROGRAMS RATINGS: (Chart 1)
VCR
SET
CH
]
Press VOL+ or VOL- to block the rating ("
appear), or unblock (" " will appear).
TV-Y7
DVD COMBO
Move[
Use CH+ or CH- repeatedly to select the desired
rating.
TV-Y
Cable/SAT
MPAA RATING
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
BLOCK
ON
New password
F Violence
Violence
Sex scenes
Language
Dialog
Fantasy Violence
Violence
Sexual Situations
Adult Language
Sexually Suggestive Dialogue
Parental Control(Continued)
Setting V-chip
Setting individual Content Categories for TV Rating
PICTURE SOUND TIMER TUNING SET UP
CONTENT
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
FANTASY V
VIOLENCE
SEXUAL
LANGUAGE
DIALOG
Move[
]
VIEW
---------
Select[
1
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
NONE
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
CONTENT
Move[ ]
F
V
S
L
Select[
]
D
3 Press CH + or CH- repeatedly to select a TV Rating.
4 Press VOL + to enter the content categories menu.
CH+ or CH- repeatedly to select a content
5 Press
category.
Press VOL + to set Block or View. If the content
6 category
does not apply to the TV rating, - - - will be
displayed.
Press VOL - to exit content categories menu.
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
F r o m t h e PA R E N TA L
GUIDELINES submenu, press
CH+ or CH- repeatedly to
select CONTENT.
VOL+ or VOL- to enter
2 Press
the CONTENT menu.
]
3
2
1
MENU
Notes:
If you want to exit the menu, please press the MENU button
repeatedly.
+
/ZOOM
CANADIAN ENGLISH RATING SET-UP
CH
STEREO/AUDIO&CH
STOP
PLAY
OPEN/CLOSE
the V-chip submenu,
1 From
press CH+ or CH- repeatedly to
select CANADIAN ENGLISH
RATING item.
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
VOL+ or VOL- to enter
2 Press
the CANADIAN ENGLISH
MPAA RATING
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
BLOCK
ON
New password
Select[
]
Move[ ] Select[
Canadian English Language Ratings:
* E: Exempt.
* C: Children.
* C8+: Children 8 years and older.
* G: General programming, suitable for all audiences.
* PG: Parental guidance.
* 14+: Viewers 14 years and older.
* 18+: Adult programming.
]
RATING sub-menu.
Press CH+ or CH- repeatedly to
select the desired rating.
3
Press VOL+ or VOL- to either
4 block
the rating (" " will appear),
or unblock ("
" will appear) it.
Move[
]
E
C
C8+
G
PG
14+
18+
28
Parental Control(continued)
Setting V-chip
CANADIAN FRENCH RATING SET-UP
PICTURE SOUND TIMER TUNING SET UP
E
G
8 ans+
13 ans+
16 ans+
18 ans+
Move[
]
From the V-CHIP submenu,
1 press
CH+ or CH- repeatedly to
select CANADIAN FRENCH
RATING.
Select[
]
VOL+ or VOL- to enter
2 Press
the CANADIAN FRENCH
MPAA RATING
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
BLOCK
ON
New password
Move[
]
Select[
]
RATING sub-menu.
1
3
2
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
DSP/OSD
VOL
VOL
MENU
/ZOOM
STOP
Changing password
+
CH
STEREO/AUDIO&CH
Canadian French Language Ratings:
* E: Exempt.
* G: Children.
* 8 ans+: Children 8 years and older.
* 13 ans+: Children 13 years and older.
* 16 ans+:Viewers 16 years and older.
* 18 ans+: Adult programming.
SET
CH
-
CH+ or CH- repeatedly to select the desired
3 Press
rating.
Press VOL+ or VOL- to block the rating (" " will
4 appear),
or unblock (" " will appear) it.
PLAY
OPEN/CLOSE
From the V-CHIP submenu,
1 press
CH+ or CH- repeatedly to
select NEW PASSWORD.
Input a new password by using
2 the
0-9 digit buttons. Press
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
MENU to confirm the new
password.
MPAA RATING
TV PARENTAL GUIDELINES
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
BLOCK
ON
New password 145Move[
]
Number[0-9]
PRESS MENU KEY TO CONFIRM
DVD MENU
REPEAT A-B
SUBTITLE
29
ENTER
TITLE
ANGLE
Next time, you enter the V-chip menu, you must use this new
password. Please be sure to remember your passwords.
DVD Operation Guide
Disc Information
Discs that can be played
This TV/DVD supports DVD, SVCD, VCD, CD-DA, HDCD, KODAK picture CD and CD-R/RW including
discs containing MP3 files. Please do not play any disc other than the above formats.
This unit detects the disc loaded and automatically sets the mode.
Discs that can not be played
Do not play DVD-Audio, DVD-ROM, DVD-RAM, CD-G, CDV, CVD, DVD-RW, CVD, SACDand Divx Video
Discs. This unit may not be able to play some CD-R/RW due to the condition of the recording.
This unit has a Dolby Digital decoder and DTS decoder so you can
play DVDS with the right symbols.
Title/Chapter/Track
DVD DISC
Title
When two or more movies are recorded on a disc, the
disc is divided into two or more sections. Each section
is called a “TITLE”.
TITLE 1
CHAPTER 1
CHAPTER 2
TITLE 2
CHAPTER 1
CHAPTER 2
CHAPTER 3
TRACK 4
TRACK 5
Chapter
The titles can be subdivided into many sections. Each section is call a “CHAPTER”.
Track
An audio CD can contain audio tracks.
These numbers are assigned to each track.
CD
TRACK 1
TRACK 2
TRACK 3
Disc handling
Handling precautions
Hold the disc by the edges so the surface will not be soiled with fingerprints.
Fingerprints, dirt and scratches can cause skipping and distortion.
Do not write on the label side.
Do not use record cleaning sprays, benzine, thinner, static electricity
prevention liquids or any other solvent.
Be careful not to drop or bend the disc.
Do not install more than 1 disc on the disc tray.
Do not close the disc tray if the disc is not installed properly.
Store the disc in its case when not in use.
Disc tray
If the surface is soiled
Wipe gently with a soft, damp (water only) cloth.
When wiping discs, always wipe from the center toward the outer edge.
(If you wipe using a circular motion, circular scratches can occur, which will cause noise.)
If the disc is brought from a cold to a warm environment, moisture may form on the disc
Wipe with a soft, dry, Iint-free cloth before using the disc.
Improper disc storage
You can damage discs if you store them in the following places:
Areas exposed to direct sunlight
Humid or dusty areas
Areas directly exposed to a heat outlet or heating appliance
31
Disc
Basic Playback
Preparation
1
2
3
4
5
6
Insert the AC cord plug into the specified polarized AC outlet.
Press POWER to turn on the unit.
When using an amplifier, switch on the amplifier.
SLEEP
Start Playback
TV/DVD
7
8
9
MUTE
+10
1
Press TV/DVD to select the DVD mode.
“LOADING” changes to “NO DISC”.
(If a DVD disc has already been loaded,
the playback will start automatically)
2
Press OPEN/CLOSE to open the disc
tray.
3
Place a disc onto the tray. Hold the disc,
position it with the printed label side up,
align it with the guides, and place it in its
proper position.
4
Press PLAY or OPEN/CLOSE to close
the disc tray and automatically start the
playback.
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
STOP
PLAY
NO DISC
OPEN/CLOSE
Label must face
u p w a r d .( W i t h
double-sided
discs, load so the
label for the side
you want to play
is facing up.)
LOADING
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
A menu screen will appear on the TV screen
if the disc has a menu feature.
In case of many movie DVDs, an interactive
DVD or Video CD with playback control, a
menu screen appears.
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
5
6
Press 3/4 or 5/6 to select title.
TITLE MENU
Dogs
Lovers
Birds
Castles
Press ENTER.
Title is selected and playback starts.
Example of DVD
Stop Playback
Note
The disc continues to rotate while
the menu is displayed even after the
player has finished playing a
particular item. When no further
selections are to be played, be sure
to press STOP to clear the menu
display.
=If
appears on the screen when a
button is pressed, the operation is
prohibited by the player or disc.
=In stop mode, if there is no operation
for 1 minute, the screen saver starts
up (this feature needs to be set in
advance). If there is no operation for
5 minutes, the DVD goes to sleep
mode automatically.
=In some cases, a blue screen may
appear when you press TV/DVD. To
go back to TV or AV mode, press this
button again.
=
1
Press STOP to end playback.
The DVD player will remember where you stopped the playback
(depending on type of disc).
“PRESS PLAY KEY TO CONTINUE” appears on the screen. Press
PLAY to resume playback from the stopped point.
If you press STOP again or unload the disc, the unit will clear the stopped
point.
After Operation
When the player is not in use, press OPEN/CLOSE to open the disc tray.
Remove the disc and press POWER
on the remote or television set.
The disc tray closes automatically and unit turns off.
Switch from DVD to TV or AV
In DVD mode, you can press TV/DVD to switch back to TV or AV mode,
which depends on the previous mode before the DVD mode is selected.
For example, you had switched the unit to DVD mode from AV mode, now
if you press TV/DVD, the unit goes back to AV mode.
32
Basic Playback
Quickly select Chapter or Track
You can quickly select chapter or track by using number buttons.
1
2
3
4
5
6
SLEEP
Note
!
TV/DVD
7
8
Some Video-CDs have a PBC feature. When the PBC is ON, you cannot
select a track during playback by pressing the number buttons.
9
MUTE
What is Playback control (PBC)?
+10
AV/SETUP
If a Video-CD has “Playback control” written on its disc or jacket, it
means that particular scenes or information can be selected for viewing
interactively using the menu screen.
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
Fast Forward Playback /
Skipping chapters or tracks forward
Use the FWD/NEXT button to view fast forward playback or skip to
the next chapter. Press and release to skip chapter, press and hold to
fast forward. With each press of this button, the unit operation is:
CH
STEREO/AUDIO&CH
STOP
PLAY
2X
OPEN/CLOSE
4X
8X
16X
To resume normal playback, press PLAY.
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
Reverse Playback /
Skipping chapters or tracks reverse
Use the REW/PREV button to view reverse playback or skip to the
previous chapter. Press and release to skip chapter, press and hold
to reverse. With each press of this button, the unit operation is:
2X
REPEAT A-B
SUBTITLE
4X
ENTER
TITLE
ANGLE
8X
16X
To resume normal playback, press PLAY.
Slow motion Playback
Press SR/SF repeatedly to view slow motion playback in reverse or
forward. With each press of this button, the unit operation is:
1 2
1 4
1 8
1 16
1 2
1 4
1 8
1 16
1 4
1 8
1 16
When playing DVD
1 2
When playing VCD
Still Playback/Frame Advance
Press PAUSE/STEP during normal playback to pause
playback.
To resume normal playback, press PLAY.
Press PAUSE/STEP during still playback.
One frame is advanced each time you press
PAUSE/STEP.
To resume normal playback, press PLAY.
Note
!
33
When playing Audio CD or MP3 CD, the function of Frame Advanced does
not work .
Using On-screen Menu
Using a TITLE MENU [DVD]
1
2
3
4
5
6
SLEEP
TV/DVD
7
8
1
+10
AV/SETUP
0
Press TITLE during playback.
TITLE MENU
A list of the titles on the disc is now displayed.
9
MUTE
Cable/SAT
Some movie discs may have two or more titles. If the disc has a title
menu recorded on it, the TITLE button can be used to select this menu.
(The details of operation depend on the disc used.)
Note
If the disc contains only one movie, the unit
plays from the beginning of the disc.
=
DVD COMBO
TV
VCR
2
Dogs
Lovers
Birds
Castles
Example of DVD
Press 3/4or 5/6 to select item and press ENTER or PLAY.
SET
CH
DSP/OSD
VOL
VOL
-
MENU
TITLE MENU
+
/ZOOM
Dogs
Lovers
Birds
Castles
CH
STEREO/AUDIO&CH
STOP
PLAY
OPEN/CLOSE
Birds
Example
Example
The selected title now starts playing.
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
Using a DVD menu [DVD]
Some DVDs have unique menus. These menus can be for language
selection, audio output selection and/or subtitle language selection, etc.
Although the DVD menu’s contents and operation differ from disc to disc, the
following explains basic operation when this feature is used.
ENTER
TITLE
ANGLE
1
Press DVD MENU during playback.
The DVD menu available on the disc is now
displayed.
Pressing RETURN resumes playback from
the scene when MENU was first pressed.
DVD MENU
1. Play Movie
2. Subtitle
3. Audio
4. Chapter
Example
2
Press 3/4or 5/6 to select item and press ENTER, or press
number buttons to select item.
Using a PBC menu [VCD]
When playing a VCD with PBC features and
the PBC fucntion is turned on, pressing the
RETURN will display the PBC menu.
Now you can select a track by using the
number buttons.
1. Sailing
2. Heal the world
3. Say you, say me
4. Happy nation
5. I can’t tell you why
6. I just call to say I love you
Press
to display remain tracks
Example
Note
Only those VCD discs with PBC features can use this menu feature.
You can toggle PBC ON and PBC OFF by pressing DVD MENU.
=
=
34
Locating Desired Scene
Locating desired scene [DVD]
1
2
3
4
5
6
You can use the title, chapter and time recorded on the disc to locate a
desired point to play back.
SLEEP
1
Press this button once and the unit allows
you to select title or chapter with the number
buttons.
You can toggle TITLE and CHAPTER with
3or4.
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
2
Cable/SAT
DVD COMBO
TV
Press SEARCH during playback.
VCR
TITLE 01/02 CHAPTER
/16
TITLE 01/02 CHAPTER 00/00
Press SEARCH again to locate desired
scene by TITLE or TIME.
TITLE 01/02 TIME : :
SET
CH
The unit allows you to select title or time with
the number buttons.
You can toggle TITLE and TIME with 3or4.
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
STEREO/AUDIO&CH
Note
=
CH
STOP
PLAY
OPEN/CLOSE
TITLE 01/02 TIME 0:00:00
The time you input should not longer than the total time of current TITLE.
3
Press SEARCH third time to locate
desired scene by CHAPTER or TIME.
CHAPTER 01/16 TIME : :
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
The unit allows you to select chapter or time
with the number buttons.
You can toggle CHAPTER and TIME with
3or4.
Note
The time you input should not longer than the total time of current CHAPTER.
=
ENTER
TITLE
CHAPTER 01/16 TIME 0:00:00
ANGLE
Locating desired point [Audio CD/VCD]
1
Press SEARCH during playback.
The unit allows you to locate desired point by
time.
DISC GOTO --:--
Note
The time you input should not longer than the total time of the disc.
=
2
Press SEARCH again.
The unit allows you to locate desired point by
time.
Note
The on-screen display maybe
different and it depends on the disc
you are playing back.
=
Note
The time you input should not longer than the total time of the current track.
=
3
Press SEARCH third time.
The unit allows you to locate desired point by
track.
35
TRACK GOTO --:--
SELECT TRACK --/12
Displaying Status of Disc
1
2
3
4
5
6
SLEEP
[DVD]
DVD
TV/DVD
7
8
9
MUTE
The status of disc can be displayed by pressing DSP/OSD
repeatedly. The information displayed on the screen is different
according to the type of disc you are playing back. Each press of this
button displays the following:
+10
There are 2 titles in the
disc and title 1 is now
playing.
AV/SETUP
TT 01/02 CHAPTER 02/16
The elapsed time of current
title.
1:21:29
The remaining time of current
title.
0:02:31
The elapsed time of current
chapter.
0:03:29
The remaining time of current
chapter.
02:31
The elapsed time of current
track.
02:29
The remaining time of current
track.
07:31
The elapsed time of the whole
disc.
52:29
The remaining time of the
whole disc.
DVD
TT 01/02 CHAPTER 02/16
0
0:08:31
DVD
Cable/SAT
DVD COMBO
TV
VCR
There are 16 chapters
in title1 and chapter2 is
now playing.
DSP/OSD
VOL
VOL
-
MENU
DVD
TT 01/02 CHAPTER 02/16
SET
CH
TT 01/02 CHAPTER 02/16
DVD
+
DISPLAY OFF
/ZOOM
CH
STEREO/AUDIO&CH
STOP
PLAY
OPEN/CLOSE
[VCD]
VCD
There are 12 tracks in
the disc and track 2 is
now playing.
REW/PREV
SR/SF
VCD
TRACK 02/12
FWD/NEXT PAUSE/STEP
SEARCH
TRACK 02/12
RETURN
VCD
TRACK 02/12
DVD MENU
VCD
REPEAT A-B
SUBTITLE
TRACK 02/12
ENTER
TITLE
VCD
ANGLE
DISPLAY OFF
Note
When playing VCD or SVCD, the "elapsed time of the whole disc" and
"remaining time of the whole disc" can not display unless the PBC is turned off.
=
[CD]
CD
Note
The on-screen display may be
different than illustrated and
dependent on the type of disc being
played.
=
There are 12 tracks in
the disc and track 2 is
now playing.
TRACK 02/12
02:31
The elapsed time of current
track.
02:29
The remaining time of current
track.
07:31
The elapsed time of the whole
disc.
52:29
The remaining time of the
whole disc.
CD
TRACK 02/12
CD
TRACK 02/12
CD
TRACK 02/12
CD
DISPLAY OFF
36
Special Functions
Zooming
1
2
3
4
5
6
7
8
9
SLEEP
When you play DVD or VCD, this unit allows you to
zoom in or zoom out during playback. Each press of
the /ZOOM button, the unit operates as:
2X
TV/DVD
MUTE
2X
+10
1 2
1 3
Normal
1 4
When you zoom in the frame image, you can make selections by
switching the position of the frame by using 3/4or 5/6.
DVD COMBO
TV
VCR
Setting soundtrack language
SET
CH
DSP/OSD
VOL
VOL
-
4X
AV/SETUP
0
Cable/SAT
3X
MENU
+
/ZOOM
You can select the language when you play a multilingual disc.
1
Press STEREO/AUDIO&CH during
playback.
AUDIO 1/2 AC3 5.1CH ENGLISH
CH
STEREO/AUDIO&CH
STOP
PLAY
OPEN/CLOSE
The current soundtrack language will appear.
2
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
Press STEREO/AUDIO&CH repeatedly
until the desired language is selected.
AUDIO 2/2 AC3 5.1CH FRENCH
The on-screen display will disappear after a
few seconds.
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
When you play Video CD, press STEREO/AUDIO&CH to change the
audio channel. With each press of this button, the unit operation is:
ANGLE
MONO LEFT
MONO RIGHT
MIX-MONO
STEREO
Note
This function depends on the disc. If the desired language is not heard after
pressing the button several times, the language is not recorded on the disc.
=The soundtrack language selection is cancelled when you open the disc
tray or turn the power off. The initial default language or available language
will be heard if the disc is played back again.
=
Repeat playback
This unit allows you to repeat material between two selected points.
1
A
The start point is selected.
Note
If you play DVD, please set point A
and B in the same chapter; If you
play VCD or audio CD, please set
point A and B in the same track.
=Some discs may not work with the
repeat operation.
=You may not be able to set A-B
repeat, depending on the scenes
of the DVD.
Press REPEAT A-B during playback.
=
37
2
Press REPEAT A-B again.
AB
The end point is selected. Playback
starts at the start point you selected and
stops at the end point, returns to Point A
automatically, then starts again.
To resume normal playback press REPEAT A-B once again.
Special Functions
Changing Angles [DVD]
1
2
3
4
5
6
7
8
9
SLEEP
TV/DVD
MUTE
+10
Some DVDs contain scenes which have been shot
simultaneously from a number of different angles. For these discs,
the same scene can be viewed from these different angles with
the ANGLE button. (This feature depends upon inclusion on the disc)
1
The current angle will appear.
AV/SETUP
0
Press ANGLE during playback.
2
Press ANGLE repeatedly until the desired angle is selected.
Note
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
STOP
PLAY
OPEN/CLOSE
This function only works for titles having scenes recorded at
different angles.
=Depending on the DVD, you may not be able to change the angles using
this button even if multi-angles are recorded on the DVD.
=
Changing Subtitle languages [DVD]
You can select the language when playing back a disc recorded with
multi-lingual subtitles.
1
REW/PREV
SR/SF
SUBTITLE 1/8: ENGLISH
The current subtitle will appear.
FWD/NEXT PAUSE/STEP
SEARCH
Press SUBTITLE during playback.
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
2
ANGLE
Press SUBTITLE repeatedly until your
desired language appears.
SUBTITLE 3/8: FRENCH
The on-screen display will disappear after a few seconds
3
If you want to turn off the subtitle, press
SUBTITLE repeatedly until “SUBTITLE
OFF” appears.
SUBTITLE OFF
Note
This operation works only with discs on which multiple subtitle
languages are recorded.
=If desired language is not selected after pressing the SUBTITLE button
several times, the language is not recorded on the disc.
=The selected subtitle language is cancelled when you open the disc tray or
turn the power off.
=In some cases, the subtitle language is not changed to the selected one
immediately.
=
38
Initial Settings
1
2
3
4
5
6
7
8
9
SLEEP
Once the initial settings have been completed, the player can
always be operated under the same conditions (especially DVDs).
The settings will be retained in the memory even after switching to
standby mode.
GENERAL SETUP
TV/DVD
MUTE
Accessing GENERAL SETUP page
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
=
GENERAL SETUP
AUDIO SETUP
VIDEO SETUP
PREFERENCE SETUP
EXIT SETUP
Now you can start GENERAL SETUP.
SET
CH
Press AV/SETUP to display initial setup
menu.
=Press5or6to select GENERAL SETUP
item.
=Press ENTER.
SETUP MENU--MAIN PAGE
DSP/OSD
VOL
VOL
-
MENU
1. Setting TV TYPE
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
Press5or6to select TV TYPE item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
GENERAL SETUP PAGE
TV TYPE
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
LAST MEMORY
PAL
AUTO
NTSC
PAL: force PAL system output.
NTSC: force NTSC system output.
AUTO: automatically identify system.
RETURN
2. Setting TV DISPLAY
DVD MENU
Press5or6to select TV DISPLAY item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
GENERAL SETUP PAGE
TV TYPE
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
LAST MEMORY
NORMAL/PS
NORMAL/LB
WIDE
NORMAL/PS: It displays the wide screen image
as full screen with left and right edges
automatically cut off.
NORMAL/LB: Select this mode when connecting to a conventional TV. When
playing back a wide screen-DVD disc, it displays the wide picture with black bands
at the top and bottom of screen.
WIDE: Select this mode when connecting to wide-screen TV. A wide screen picture
is displayed in full size.
Note
Note
Press the AV/SETUP button to exit
setup menu after completion of
initial settings.
=The "6" mark on the screen
indicates that there are some items
that cannot be displayed on screen.
To display the concealed items,
press the "6" button.
This function may not operate on all discs.
=
=
3. Setting ANGLE MARK
Press5or6to select ANGLE MARK
item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
GENERAL SETUP PAGE
TV TYPE
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
LAST MEMORY
OFF
ON
ON: When playing back a DVD disc recorded with a multi-angle feature, an angle
indicator will display on the screen.
OFF: turns off the multi angle display indicator.
Note
This function only works for the discs recorded with the multi angle feature.
=
39
Initial Settings
GENERAL SETUP (continued)
1
3
2
4. Setting OSD LANGUAGE
SLEEP
4
5
6
7
8
9
TV/DVD
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
TV TYPE
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
LAST MEMORY
ENGLISH
FRENCH
SPANISH
VOL
VOL
+
/ZOOM
CH
STOP
PLAY
5. Setting the CAPTION feature
Press5or6to select CAPTIONS item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
DSP/OSD
MENU
STEREO/AUDIO&CH
GENERAL SETUP PAGE
This unit provides ENGLISH, FRENCH and
SPANISH OSD languages for your selection.
CH
-
Press5or6to select OSD LANG item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
OPEN/CLOSE
GENERAL SETUP PAGE
TV TYPE
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
LAST MEMORY
ON
OFF
This function allows you to turn the closed caption
feature on or off.
Note
This function depends on the discs.
=
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
6. Setting SCREEN SAVER
SEARCH
RETURN
Press5or6to select SCREEN SAVER
item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
GENERAL SETUP PAGE
TV TYPE
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
LAST MEMORY
ON
OFF
If you set SCREEN SAVER to ON, the unit will start
the screen saver when there is no disc or the DVD
is in STOP mode for 1 minute.
Note
This function only works when the TV/DVD is in DVD mode.
=
7. Setting LAST MEMORY
Note
Press the AV/SETUP button to exit
setup menu after completion of
initial settings.
=
Press5or6to select LAST MEMORY
item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
GENERAL SETUP PAGE
TV TYPE
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
LAST MEMORY
ON
OFF
If you set this feature to ON, the unit remembers the stop point on the disc when the
DVD component is switched off by the remote control. Once the DVD component
is switched on again, the unit will play from the last stop point automatically. This
function is useful when you are watching movie.
Note
This function does not work when the DVD component is switched off by
pressing POWER or TV/DVD button on the panel of the unit.
=
40
Initial Settings
AUDIO SETUP
1
3
2
Accessing AUDIO SETUP page
SLEEP
4
5
6
7
8
9
TV/DVD
MUTE
+10
AV/SETUP
0
AUDIO SETUP PAGE
Press AV/SETUP to display initial setup
menu.
=Press5or6to select AUDIO SETUP
item.
=Press ENTER.
=
SPEAKER SETUP
SPDIF SETUP
HDCD
MAIN PAGE
Now you can start AUDIO SETUP.
1. SPEAKER SETUP
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
SPEAKER SETUP PAGE
Press5or6to select SPEAKER SETUP
DOWNMIX
LT/RT
item.
STEREO
=Press ENTER to enter.
AUDIO SETUP
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=Press6to select AUDIO SETUP item and press ENTER to return
to AUDIO SETUP PAGE.
=
LT/RT: output audio signal which is encoded with Dolby surround stereo
information so that an amplifier is able to process the signal.
STEREO: output audio signal in left and right channel.
RETURN
2. SPDIF SETUP
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
Press5or6to select SPDIF SETUP item.
Press ENTER to enter.
=
ANGLE
=
SPDIF: Sony/Philips Digital Interface. The unit outputs a
amplifier to decode via SPDIF.
SPDIF OUTPUT
Press5or6to select SPDIF OUTPUT item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
Note
Press the AV/SETUP button to exit
setup menu after completion of
initial settings.
digital signal for the
SPDIF SETUP PAGE
SPDIF OUTPUT
LPCM OUT
SPDIF OFF
SPDIF/RAW
SPDIF/PCM
AUDIO SETUP
SPDIF OFF: turn off SPDIF output.
SPDIF/PCM: the unit first decodes the disc and then encodes the audio signal as
PCM to the output.
=
LPCM OUT
Press5or6to select LPCM OUT item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
SPDIF SETUP PAGE
SPDIF OUTPUT
LPCM OUT
48K
96K
AUDIO SETUP
48k: convert 96K LPCM digital audio to 48K
LPCM digital audio and output.
96K: output LPCM digital audio with its original codes.
Press6to select AUDIO SETUP item and press ENTER to return
to AUDIO SETUP PAGE.
=
Note
If the sample rate of the disc is lower than your choice, the audio outputs
according to the lower sample rate.
=
41
Initial Settings
AUDIO SETUP (continued)
1
3
2
3. Setting HDCD
SLEEP
5
4
6
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
DSP/OSD
VOL
VOL
MENU
+
/ZOOM
REW/PREV
STOP
SR/SF
PLAY
OFF
ON
AUDIO SETUP
Accessing VIDEO SETUP page
OPEN/CLOSE
VIDEO SETUP PAGE
Press AV/SETUP to display initial setup
menu.
=Press5or6to select VIDEO SETUP
item.
=Press ENTER.
SHARPNESS
BRIGHTNESS
CONTRAST
LUMA DELAY
Now you can start VIDEO SETUP.
MAIN PAGE
HIGH
MEDIUM
LOW
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
1. Setting SHARPNESS
Press5or6to select SHARPNESS item.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
DVD MENU
REPEAT A-B
SUBTITLE
FILTER
VIDEO SETUP
=
CH
STEREO/AUDIO&CH
HDCD SETUP PAGE
SET
CH
-
Press5or6to select HDCD item.
Press ENTER to confirm.
=Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=Press6to select AUDIO SETUP item
and press ENTER to return to AUDIO
SETUP PAGE.
=
=
ENTER
TITLE
ANGLE
The unit allows you to set SHARPNESS to HIGH,
MEDIUM or LOW.
VIDEO SETUP PAGE
SHARPNESS
BRIGHTNESS
CONTRAST
LUMA DELAY
HIGH
MEDIUM
LOW
MAIN PAGE
2. Setting BRIGHTNESS
Press5or6to select BRIGHTNESS item.
=Press 4 to access option item.
=Press ENTER to confirm.
=Press5or6to adjust.
=Press 3to return.
=
Note
Press the AV/SETUP button to exit
setup menu after completion of
initial settings.
VIDEO SETUP PAGE
SHARPNESS
BRIGHTNESS
CONTRAST
LUMA DELAY
0
MAIN PAGE
=
PRESS LEFT TO MAIN MENU
BRIGHTNESS
+2
3. Setting CONTRAST
VIDEO SETUP PAGE
Press5or6to select CONTRAST item.
=Press 4 to access option item.
=Press ENTER to confirm.
=Press5or6to adjust.
=Press 3to return.
=
SHARPNESS
BRIGHTNESS
CONTRAST
LUMA DELAY
0
MAIN PAGE
PRESS LEFT TO MAIN MENU
CONTRAST
+2
42
Initial Settings
VIDEO SETUP (continued)
1
2
3
4
5
6
4. Setting LUMA DELAY item
SLEEP
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
In most cases, "1T" is recommended when playing
DVD material. "0T" is recommended when playing
other material.
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
CH
STOP
PLAY
OPEN/CLOSE
SHARPNESS
BRIGHTNESS
CONTRAST
LUMA DELAY
MAIN PAGE
Accessing PREFERENCE SETUP page
Press AV/SETUP to display initial setup
menu.
=Press5or6to select PREFERENCE
SETUP item.
=Press ENTER.
Now you can start PREFERENCE SETUP.
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
MAIN PAGE
REW/PREV
SR/SF
The PREFERENCE PAGE can not be accessed
unless the DVD is in STOP mode or no disc
loaded by the unit.
FWD/NEXT PAUSE/STEP
SEARCH
0T
1T
PREFERENCE SETUP
=
/ZOOM
STEREO/AUDIO&CH
VIDEO SETUP PAGE
=
TV/DVD
7
Press5or6to select LUMA DELAY item.
Press 4 to access option item.
=Press5or6to select option item.
=Press ENTER to confirm and press 3to
return.
=
RETURN
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
KOREAN
RUSSIAN
THAI
OTHERS
1. Setting Audio Language
DVD MENU
Press5or6to select AUDIO item.
=Press 4 to access option item.
=Press5or6to select an audio language.
=Press ENTER to confirm and press 3to
return.
=
REPEAT A-B
SUBTITLE
ENTER
TITLE
ANGLE
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
KOREAN
RUSSIAN
THAI
OTHERS
2. Setting Subtitle Language
Press5or6to select SUBTITLE item.
=Press 4 to access option item.
=Press5or6to select a subtitle
language.
=Press ENTER to confirm and press 3to
return.
=
Note
Press the AV/SETUP button to exit
setup menu after completion of
initial settings.
=T h e
AUDIO LANGUAGE,
SUBTITLE LANGUAGE and DISC
MENU LANGUAGE features are
only available if they have been
programmed into the DVD.
=
43
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
KOREAN
RUSSIAN
THAI
OTHERS
3. Setting Disc menu Language
Press5or6to select DISC MENU item.
=Press 4 to access option item.
=Press5or6to select a disc menu
language.
=Press ENTER to confirm and press 3to
return.
=
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
MAIN PAGE
ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
KOREAN
RUSSIAN
THAI
OTHERS
Initial Settings
PREFERENCE SETUP (continued)
1
2
3
4
5
6
7
8
9
4. Setting Parental lock level
SLEEP
TV/DVD
MUTE
DVD COMBO
TV
AV/SETUP
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
Press5or6to select PARENTAL item.
Press 4 to access option item.
=Press5or6to select a desired rating.
=Press ENTER to confirm.
=
+10
0
Cable/SAT
This is to disable the playing of some DVDs which are unsuitable for some
audiences, for example, children. Some DVDs are encoded with a specific
rating level. If the rating level of the disc is higher than that preset in the initial
settings operation, playback of the disc will be prohibited.
=
The unit will display "PASSWORD VERIFY
PAGE" and you will need to input your
password to finish setting the rating level.
Please refer to the "Setting PASSWORD"
subchapter for information on setting a
password for the Parental Lock
Enter password with number buttons.
=Press ENTER to confirm.
=
STOP
PLAY
OPEN/CLOSE
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
MAIN PAGE
1 KID SAF
2G
3 PG
4 PG 13
5 PGR
6R
7 NC 17
8 ADULT
OFF
PASSWORD VERIFY PAGE
OLD PASSWORD
Note
This function depends upon encoding on the
disc. Some discs may not be encoded with
specific rating level information. For those
discs without this encoding the PARENTAL
LOCK function may not work.
=
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
ENTER
5. Setting 6-digit Password
Press5or6to select PASSWORD item.
Press 4 to access option item.
=Press ENTER to confirm.
=
SUBTITLE
TITLE
ANGLE
=
Now the unit display "PASSWORD CHANGE
PAGE".
Enter the old password.
Enter the new password.
=Repeat the new password.
=
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
CHANGE
MAIN PAGE
PASSWORD CHANGE PAGE
=
Be sure to remember your new password!
The default password for the unit is blank. If you
are entering a password into the unit for the first
time, you will not be asked to enter the OLD
PASSWORD.
Note
Press the AV/SETUP button to exit
setup menu after completion of
initial settings.
=
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
6. Loading Default setttings
This function allows you to load the default settings from factory. Please use
CAUTION when activating this function as all programmed setting will be
replaced by the factory default settings.
Press5or6to select DEFAULT item.
=Press 4 to access option item.
=Press ENTER to confirm.
=
PREFERENCE PAGE
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULT
RESET
MAIN PAGE
44
Playing Back MP3 disc
1
2
3
4
5
6
This unit is able to playback discs recorded
with MP3 files. When a MP3 disc is loaded,
a file menu screen displays.
SLEEP
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
MENU
=
FOLDER1
FOLDER2
FOLDER3
FOLDER4
FOLDER5
FOLDER6
=
PLAY MODE
Note
This menu screen is for illustration only.
If all MP3 files are recorded in the root
directory, no folder appears.
FOLDER
PLAYBACK OPERATIONS
1. Playback
=Press5or6to select your desired folder
=Press ENTER to enter the folder and display MP3 tracks.
=Press 4 to access MP3 track item.
MENU
=Press5or6to select a desired track.
< UP DIR >
MP3Track1
MP3Track2
=Press PLAY or ENTER to playback.
MP3Track3
How do you return to the upper directory?
=Press STOP to stop playback.
=Press 3to select <UP DIR> item.
=Press ENTER to confirm.
MP3Track4
MP3Track5
MP3Track6
PLAY MODE
FOLDER
2. Music track selection
=Press 0-9 to select a desired track.
You need to input a 3-digit track number by using number buttons.
For example, you want MP3Track5, press 0 0 5 in order.
RETURN
- or -
DVD MENU
Press STOP to stop playback.
Press 5or6to select a desired track.
=Press PLAY or ENTER to playback.
3. Pause Playback
=Press PAUSE/STEP during playback.
=To resume playback, press PAUSE/STEP again or press PLAY.
=
REPEAT A-B
ENTER
=
SUBTITLE
TITLE
ANGLE
4. Stop Playback
=Press STOP during playback.
5. Fast Forward Playback / Skip tracks forward
Note
The on-screen display may be
different depending on the disc you
are playing.
=
Press FWD/NEXT repeatedly to playback fast forward or skip to next
track. Each press of this button, the unit functions as follows:
2X
4X
8X
16X
To resume normal playback, press PLAY.
6. Reverse Playback /Skip tracks reverse
Press REW/PREV repeatedly to playback reverse or skip to last
track. Each press of this button, the unit functions as follows:
2X
4X
8X
To resume normal playback, press PLAY.
45
16X
Playing Back MP3 disc
PLAY MODE selection
1
2
3
4
5
6
SLEEP
You need to stop playback before selecting a play mode.
=Press STOP to stop playback.
=Press4to toggle MP3track and PLAY MODE
- or -
TV/DVD
7
8
9
MUTE
+10
AV/SETUP
0
Cable/SAT
DVD COMBO
TV
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
1. SINGLE
The unit only plays the selected track
and automatically stops when the track
is finished.
2. REPEAT ONE
The unit plays only the selected track
and automatically repeats this track.
MENU
< UP DIR >
PLAY MODE
MP3Track1
MP3Track2
MP3Track3
MP3Track4
MP3Track5
MP3Track6
SINGLE
REPEAT ONE
CH
STEREO/AUDIO&CH
Press3to toggle <UP DIR> item and PLAY MODE.
Press5or6 to select desired play mode.
=
ENTER
TITLE
ANGLE
3. REPEAT FOLDER
The unit plays all tracks in current folder
and automatically repeats all tracks in
this folder.
4. SHUFFLE
The unit only tracks in current folder in
random order, regardless of pressing
the REW/PREV or FWD/NEXT buttons.
REPEAT FOLDER
SHUFFLE
FOLDER
SINGLE
5. FOLDER
The unit only plays all tracks in current
folder and automatically stops when all
tracks have been played.
Note
The on-screen display may be
different depending on the disc you
are playing.
=
46
Playing Back Kodak Picture CD
This unit is able to playback Kodak picture
CDs.
1
2
3
4
5
6
Supported formats:
SLEEP
=
TV/DVD
7
8
9
MUTE
File system: ISO9660, Joliet.
File extension: JPEG files.
=Max. picture size: 3072 x 3072 pixels
=
+10
AV/SETUP
0
MENU
FOLDER1
FOLDER2
FOLDER3
FOLDER4
FOLDER5
FOLDER6
PLAY MODE
FOLDER
When a Kodak picture CD is loaded, a
menu screen displays.
Note
This menu screen is for illustration only.
If all JPEG files are recorded in the root directory, no folder appears.
=
=
Cable/SAT
DVD COMBO
TV
VCR
PLAYBACK OPERATIONS
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
REW/PREV
STOP
SR/SF
PLAY
OPEN/CLOSE
FWD/NEXT PAUSE/STEP
SEARCH
RETURN
DVD MENU
REPEAT A-B
SUBTITLE
ENTER
TITLE
1. Slide Playback
=Press5or6to select your desired folder
=Press ENTER to enter the folder and display picture files.
=Press 4 to access picture files.
MENU
=Press5or6to select a desired file.
< UP DIR >
=Press PLAY or ENTER to playback.
How do you return to the upper directory?
=Press DVD MENU to stop playback.
=Press 3to select <UP DIR> item.
=Press ENTER to confirm.
PLAY MODE
JPEG1
JPEG2
JPEG3
JPEG4
JPEG5
JPEG6
FOLDER
2. Picture selection
=Press 0-9 to select a desired picture.
You need to input a 3-digit number by using number buttons.
For example, you want JPEG5, press 0 0 5 in order.
ANGLE
- or Press DVD MENU to stop playback.
Press 5or6to select a desired picture.
=Press PLAY or ENTER to playback.
=
=
Note
The on-screen display may be
different depending on the disc you
are playing.
=
3. Pause Slide Playback
=Press PAUSE/STEP during slide playback.
=To resume slide playback, press PAUSE/STEP again or press
PLAY or ENTER.
4. Stop playback and return to file list
=Press DVD MENU during slide playback.
PLAY MODE selection
The operation of this feature is similar to the section "PLAY MODE
selection" detailed on the previous page.
47
Playing Back Kodak Picture CD
Setting picture transition effects
1
2
3
4
5
6
7
8
9
SLEEP
The transition effects is applied at the moment when the current slide
image is replaced by the next slide image. This unit provides 17
kinds of transition effects. You can select the transition effect by
pressing ANGLE during slide playback.
TV/DVD
MUTE
Transit from vertical center to left
and right
Transit from bottom and top to
horizontal center
Transit from left and right to
vertical center
Transit from top to bottom in
four windows
Transit from left to right in
four windows
Transit from top to bottom
+10
AV/SETUP
Transit from bottom to top
0
Transit from left to right
Cable/SAT
DVD COMBO
TV
Transit from right to left
Transit from top left corner to
bottom right corner
Transit from top right corner to
bottom left corner
Transit from bottom left corner to
top right corner
Transit from bottom right corner
to top left corner
Transit from horizontal center to
bottom and top
VCR
SET
CH
DSP/OSD
VOL
VOL
-
MENU
+
/ZOOM
CH
STEREO/AUDIO&CH
STOP
PLAY
OPEN/CLOSE
Transit periphery top to center
RANDOM: Apply effects in random
NONE: No effect is applied
Zooming picture
REW/PREV
SR/SF
FWD/NEXT PAUSE/STEP
Press
/ZOOM during slide playback to turn on ZOOM function.
Press FWD/NEXT to zoom in. Each press of this button, the unit
functions as follows:
=
=
SEARCH
RETURN
ZOOM 100%
DVD MENU
REPEAT A-B
SUBTITLE
ANGLE
ZOOM 150%
ZOOM 200%
You can move the picture by pressing 5/6or3/4.
ENTER
TITLE
ZOOM 125%
Press REW/PREV to zoom out. Each press of this button, the unit
operates as:
=
ZOOM 100%
Press
=
ZOOM 75%
ZOOM 50%
/ZOOM to turn off ZOOM function.
Rotating/Mirroring picture
Note
The on-screen display may be
different depending on the disc you
are playing.
=The ZOOM function does not
works with progressive scanning
pictures.
=
The unit allows you to rotate or mirror picture during slide playback
by pressing 3/4or5/6.
o
=Press 3during slide playback to rotate picture anti-clockwise by 90 .
o
=Press4during slide playback to rotate picture clockwise by 90 .
=Press 5during slide playback to mirror picture vertically.
=Press 6during slide playback to mirror picture horizontally.
Browsing pictures
Press STOP during slide playback to browse pictures.
=
Every screen displays 12 pictures in proportional thumbnails.
Press 3/4or5/6to select item.
Press ENTER or playback to confirm.
=
=
48
Setting the Universal Remote Control Unit
Your Universal Remote Control has been preprogrammed to operate your TV (just press the TV button). You may also
program the Universal Remote Control to operate other devices.
1. HOW TO SET THE UNIT
Locate the correct code for the Brand/Model of the device you wish to control from the attached code list.
1
2
3
Press and hold the SET key and then press the key that corresponds to the device you wish to control (TV, VCR,
Cable/SAT, or DVD/VCD/HIFI).
Enter one of the 3-digit code for your Brand/Model from the list.
The LED indicator will blink twice.
If the correct code has been entered, all the functions of the device you wish to control should operate. Some of the
codes will control most but not all of the functions of your device. If this occurs, repeat the above 3 steps using
another 3 digit code from the code list that corresponds to your Brand/Model.
Note:
Do not exceed 5 seconds between each step.
2.
1
2
3
3.
HOW TO DETERMINE A 3-DIGIT CODE
Hold SET and press 1 simultaneously then release. The number of times LED indicator represents the number
of the 1st digit.
Hold SET and press 2 simultaneously then release. The number of times LED indicator represents the number
of the 2nd digit.
Hold SET and press 3 simultaneously then release. The number of times LED indicator represents the number
of the 3rd digit.
HOW TO USE “QUICK SEARCH”
If you can not locate the appropriate code for your Brand/Model, you can try “Quick Search”.
1
2
Turn the device you wish to control ON.
Locate the button on the Universal Remote Control for the device you want to operate (TV, VCR, Cable/SAT, or
DVD/VCD/HIFI). Press this key for 3 seconds, then release. The “Quick Search” mode is on when the LED
indicator blinks.
3 When the device you wish to control shuts off, immediately press the SET key and release.
If the correct code has been found, all the functions of the device you wish to control should operate. If not,
repeat the above steps 1 -3.
4. HOW TO SWITCH OVER TO DIFFERENT DEVICE
Your Universal Remote Control is already programmed to operate your TV (just press the TV button). If you have
programmed the Universal Remote Control to operate other devices, you must press the key that corresponds to the
device you wish to control (TV, VCR, Cable/SAT, or DVD/VCD/HIFI).
5. CODE LIST ON SETUP MODE OR QUICK SEARCH MODE
DEVICE NAME
FOR DEVICE
TV
TV/CTV/TXT
304
001-304
VCR
VCR
384
001-384
CAB/SAT
CABEL/SATELLITE
270
001-270
DVD/VCD/HIFI
DVD/VCD/HIFI
292
001-292
TOTAL CODES
ACTIVE DEVICE CODE
6. MEMO OF BRAND & MODEL
DEVICE
TV
VCR
CAB/SAT
DVD/VCD/HIFI
49
BRAND
MODEL
CODE
Setting the Universal Remote Control Unit
7. CODE LIST ON SETUP MODE OR QUICK SEARCH MODE
TV codes
ADMIRAL
143 146 147 148
MAGNAVOX
013 207 208 209 210
ADVENT
001 002 133 134 142 153 155
157
METZ
132 217 218 219 220 221
MITSUBISHI
014 048 211 212 213
AIKO
026
MIVAR
070 131 214 215 216
AIWA
039 058
NEC
029 056 227 228 229 230
AKAI
073 079 084 085 101 107 109
111 123 125
NIKKO
026 222 223 224 225 226
NOBLEX
031 231 232 233 234 235
NOKIA
035 036 236 237 238 239
OPTA
129 240 241 242 243 244
PANASONIC
015 020 046 047 061 062 078
096 097 122 245 246
PEONY
038 042 260 261 262 263
PHILCO
026 030 247 248 249 250
PHILIPS
013 072 124 251 252 253 254
255 256 257 258 259
PIONEER
055 151 264 265 266 267 268
AUDIOVOX
BLUEHOUSE
CCE
026
150
126 127 149 150
DAEWOO
026 030 040 080 081 082 086
128 151 152
DIGISTAR
001 002 133 134 142 153 155
157
DISH
146
ELBE
089 130 103 154
EMERSON
030 137 143 153
FINLUX
034 135 155 156 157
PRIMA
001 002 133 134 142 153 155
157
FIRSTLINE
136 160 161 162 163
RCA
068 147 269 270 271 272 273
FISHER
088 164 165 166 167
SAMSUNG
021 037 038 071 094 285
FUNAI
057 059 060 158 159
GINXIN
113
SANYO
022 025 052 053 064 090 108
138 139 140 286 287
GOLDSTAR
027 171 172 173 174 178 179
180 181
SEARS
064 288 289 290
SELECO
087 105
GRADIENTE
024 029 168 169 170
SHARP
016 054 063 274 275 276
GRUNDIG
028 077 175 176 177
SINUDYNE
074 075 076 091
SONY
017 049 069 098 277 278 279
280 281 282 283 284
HITACHI
019 099 050 182 183
HUGHES
148
ITT-NOKIA
102 110 112 184 185
TEKNIKA
026
JENSEN
001 002 133 134 142 153 155
157
THOMSON
067 083 093
TOBO
119
TOSHIBA
018 023 051 065 100 298 299
300
JVC
011 012 032 033 045 066 095
186 187 188
KASEIKYOU
047 189 190 191 192
LG
027 193 194 195 196
WHITE-WESTING
HOUSE
001 002 133 134 142 153 155
157
LG-GOLDSTAR
092 104 106 205 206
YAMAHA
145
LOEWE
129 201 202 203 204
ZENITH
026 030 143 144 301 302
LUXOR
125 197 198 199 200
50
Setting the Universal Remote Control Unit
DVD/VCD/HIFI codes
51
ADVENT
147
AIWA
021
AKAI
145
ALCO
145
BLUEHOUSE
123
DENON
018 061 062 107 108 121
DMTECH
050 096 122 123 124 125
FISHER
143
GRUNDIG
016 050 126 127 128 129
130 131 132 241 242 243
244 245
NORDMENDE
144 267 268 269 270 271
272
ONKYO
022 067 069 113 115 134
135 187 188
OPTIMUS
004 181 182 183 184 185
186
ORION
042 044 059 088 090 105
120 180
PANASONIC
002 018 019 020 052 061
098 107 133 189 190 191
192 193 194
PHILIPS
023 067 070 113 116 195
196 197
PIONEER
004 034 041 080 087 132
198 199 200 201
PRIMA
147
PROSCAN
071 117 202 203 204 205
206 207 208
RCA
071 117 209 210 211 212
213 214
HARMAN
063 109 138 139 140 141
142 143 246 247 248 249
250
HITACHI
024 025 133 134 135 136
137 142 251 252 253 254
IRT
050 255 256 257 258 259
260
JENSEN
147
JVC
006 017 047 048 051 054
060 064 065 093 094 097
100 106 110 111
SAMSUNG
011 014 015 049 095 226
227 228
JX2033G
122 261 262 263 264 265
266
SANYO
007 033 040 056 057 079
086 102 103 121 131 229
230 231 232 233 234
KARDON
063 109 144 145 146 147
148
SHARP
026 130 215 216 217 218
219 220 221
KENWOOD
008 029 030 031 032 039
043 066 075 076 078 085
089 112 138 140 141
SHERWOOD
072 118 126 127 128 129
238 239
SONY
LENCO
136 137 138 139 140 149
150
001 054 055 101 125 222
223 224 225
MAGNAT
050 235 236 237
TECHNICS
004 061 107 124 273 274
275
MAGNAVOX
067 113 154 155 156 157
158
THOMSON
012 046 092 240
MATSUI
013 159 160 161 162 163
164
TOSHIBA
003 005 031 042 053 058
059 067 077 088 099 104
105 113
MICROMEGA
009 174 175 176 177 178
179
VIDEOWAY
060 276 277 278 279 280
281
MITSUBISHI
010 045 068 091 114 165
166 167 168 169 170 171
172 173
WANLIDE
119 282 283 284 285 286
287
YAMAHA
035 036 037 038 061 081
082 083 084 107 288
ZENITH
067 113 289 290
Setting the Universal Remote Control Unit
CABLE/SATELLITE codes
ALPHASTIR
097
AMSTRAD
029 030 031 032 065
066 067 068 092
GRUNDIG
HAMLIN KARDON
033 069 119 120 121
202 203 204
PRIMESTAR
025
PROSCAN
131
008 012 015 061 129
205
QUICK ORAW
123 266 267 268 269
RADIO SHACK
114 124
RAMSEY
122
RCA
009 010 021 062 063
094 131 270
REALISTIC
129
REGAL
008 012 015 061
AMWAY
098
059 097 098 099 140
141 142 143
HEME CABLE
ATLANTA
HITACHI
105 210 211 212 213
ATRANTA
055 094 095 096 136
137 138 139
HOUSTON
TRACKER
045 214 215 216 217
BT
074 100 101 102 144
145 146 147
HUGHES
096 105 106 107 108
109 110 111
CABLE
INNOVATIONS
114
INNTERSAT
117 218 219 220 221
RFT
035
IO
116 222 223 224 225
RURAL CABLE
124
CABLEVIEW
011 014 017 103 148
149
JANEIL
113 226 227 228 229
SAGEM
046
SAMSUNG
003 016 027 057 125
JERROLD
002 004 020 056 077
082 138 139 140 141
142 143 230 231 232
233
SATLANTA
001 006
SELECTOR
090
038 039 074 075 130
131 132 133 134 135
136 137 234
SIERRA
133
SIGMA
005 013 058
SKY
028 064
SKYMASTER
035 071
SL MARX
016
SONY
022
STAR SIGHT
131
STAR TRAK
120
CENTURY
CHANNEL
MASTER
CHAPANAL
CHEYENNE
CI SATELLITE
CINAL+
100
101 150 151 152 153
102 133 158 159 160
133 154 155 156 157
099 167 168 169
044 081 170 171 172
CITIZEN
011 014 017 104 165
166
CITOH
134 161 162 163 164
CONILER
103 173 174 175 176
CURTIS-MATHES
001 006 055 059 104
D-BOX
085 110 111 112 177
178 179 180
DEHAN
019 107 108 109 181
182 183 184
DIRECTV
JVC
115 206 207 208 209
KATHREIN
036 037 072 073
LEGEND
132
LG
018 144 145 146 147
148 235 236 237 238
MAGNAVOX
023 024 130 149 150
151 152 245 246
MASCOM
053 093 119 153 154
155 156 157 239 240
STRONG
126
STS
116
036 158 159 160 161
162 241 242 243 244
SUPER GUIDE
127
TAIHAN
019
TCE
131
TEECOM
128
MASPRO
MEMGREX
130 247 248 249 250
105 106 107 108 109
110 111
NOKIA
087 163 164 165 166
167 251 252 253 254
DISH
095
NORSAT
103
THOMSON
019
DISHPLAYER
135 185 186 187 188
104 119
112
OAK
TOSHIBA
DRAHE
005 013 058 168 169
170 255 256
TPS
046 083
DX ANTENNA
025 123
OPTIMUS
130 257 258 259 260
TRIAX
051 054 091
ECHOSTAR
026 041 042 043 045
078 079 080 189 190
ORB
120
UNIDEN
114 115 129 130
PACE
048 052 086 261 262
VIDEO CIPHER II
113
PANASONIC
009 010 040 062 063
076 171 172 173 174
175 176
VIDEOWAY
060
ZENITH
007 060 104 112 113
FORCE
050 089 113 114 191
192 193
FUJITSU
113 194 195 196 197
GALAXIS
035 049 088 123 124
PANSAT
121
GENERAL
INSTRUMENT
025 114 124
PHILIPS
GI
002 004 020 056 082
122
034 047 070 084 130
177 178 179 180 181
182 183 184
PHONOTREND
035
GI/JERROLD
056 125 126 127 128
PICO
122
GOLDSTAR
018 115 116 117 118
198 199 200 201
PIONEER
003 057 185 186 263
264 265
52
Setting the Universal Remote Control Unit
VCR codes
ADMIRAL
024
DYNATECH
138 139
ADVENT
138 139
ELBE
100 185 186 187 188 189
ADVENTURE
138139
ELECTROHOME
032 177
AIKO
138
ELECTROPHONIC
032
AIWA
111 114 136 025 031 051
085 096 138 139 140 141
184
EMERSON
032 037 056 138 139 140
141 156 158 162 173 174
176 177 184 186 191
003 026 029 030 089 090
098 099 101 108 132 137
139 142 175 177 185 186
187 188
FERGUSON
104 190 191 192 193 194
AKAI
FISHER
035 074 095 103 142 147
154 180 195 196 197 198
ALLEGRO
188
FUJI
003 173 174
ALOSTAY
113 157 158 159 160 161
FUNAI
138 139
GARRARD
138
GE
152 171 172 173 174
GOLDSTAR
032 074
GO-VIDEO
039 148
GRADIENTE
138
GRANDA
094 110 199 200 201 202
GRUNDIG
055 070 071 091 092 093
HARMAN
074 138
HARWOOD
145
HEADQUARTER
035
HINARI
097 130 206 207 208 209
HI-Q
147
HITACHI
027 033 034 139 149 150
175 204 205
INNOHT
105 210 211 212 213 214
AMERICAN HIGH
ANITECH
ASHA
AUDIO DYNAMICS
AUDIOVOX
AUSTAR
AUTOVOX
BAIRD
BEAUMAIK
BELL&HOWELL
BIOKSONIC
53
173 174
118 131 148 149 150 151
041
074
032
117 143 144 145 146 147
119 152 153 154 155 156
102 162 163 164 165 166
041
035
056
BROKSONIC
140 141 144
BSR
108 128 133 134 167
168 169 170
CALIX
032
CANDLE
032 037 041 074 160 164
189
INSTANT
REPLAY
139 173 174
CANON
165 172 173 174
INTEQ
032
CAPEHART
161
IRRADIO
082 215 216 217 218 219
CARVER
180
JC PENNEY
CCE
145 166
014 032 035 041 074 149
150 172 174 175
032 037 041 074 160 164
166 189
JCL
173 174
CITIZEN
JENSEN
149 175
COLORTYME
074
COLT
145
JVC
014 015 022 044 048 049
052 053 054 074 077 078
079 080 115 116 175 188
CRAIG
032 041 145 147
KATHREIN
036 037 072 073 220 221
CURTIS-MATHES
041 074 139 146 174 171
172 189
KENWOOD
014 074 175 189
KLH
145 151
KODAK
032 173 174
LG
038 222 223 224 225 226
LG-GOLDSTAR
032 106 107 231 232 233
LLOYD
138 139
CYBERNEX
041
DAEWOO
037 042 043 069 138 141
160 161 164 166 171 172
173 174 175 176 177 178
179
DAYTRON
161 162
LOEWE
020 127 227 228 229 230
DBX
014 074
LOGIK
145
DIMENSIA
171
LXI
032
DUAL-TEC
120 180 181 182 183 184
MAGNAVOX
172 173 174 180
Setting the Universal Remote Control Unit
VCR codes
MAGNIN
041
RICOH
002
RRADIO
109
MARANTZ
014 035 074 121 144 174
180 189 242 243 244 245
246
SAMSUNG
039 037 040 041 045 057
149 152 155 185 256 257
258
SANSUI
175 181
SANYO
035 036 041 067 068 134
147 259 260 261
MARDS
173
MARTA
032
MASUSHITA
173 174
MATSUI
056 057 234 235 236 237
MEI
173 174
SCOTT
141 156 176 191
MEMGREX
024 032 035 041 138 139
147 173 174 185
SEARS
032 035 142 147 149 150
154 173 174
MGA
176 177
SHARP
024 064 139 164 262 263
264 265 266
MGN TECHNOLOGY
041
SHINTOM
002 003 145 149 190
MIDLAND
152
SHOGUN
041
MINOLTA
149
SIGNATURE
139
MITSUBISHI
014 046 047 063 149 176
177 183 191 238 239 240
SINGER
145 173 174
MOTOROLA
024173 174
SINUDYNE
087 088
MTC
041 138 139
SONY
MULTITECH
041 138 139 142 152
001 002 003 004 005 006
007 008 009 010 178 179
267 268 269 270
NEC
014 035 074 075 144 146
175 189 248 249 250 251
STS
173 174
SYLVANIA
138 139 176
SYMPHONIC
139
TANDY
035 139
TASHIKO
032
TATUNG
175
TEAC
138 139 175 181
TECHNICS
021 173
TEKNIKA
032 138 174
THOMSON
019 050 066 072 073 076
123 124 125 126
THORN
104 122
TMK
041 146 158
TOSHIBA
037 050 065 081 154 271
272 273 274
TOTEVSION
032 041
UNITECH
041
VECTOR RESEARCH
014 037 074 189
VICTOR
014
VIDEO CONCEPTS
037 074 177 189
VIDEOSONIC
014 041
NIKKO
032
NOBLEX
041
NORDMENDE
083 252 253 254 255
OLYMPUS
173 174
OPTIMUS
021 024 032 153
OPTONICA
039 157
ORION
028 056 084 112 135
PANASONIC
021 023 060 061 062 172
173 174
PENTAX
149 150 189
PENTEX RESEARCH
074
PHILCO
172 173 174
PHILIPS
011 012 013 016 017 018
058 059 173 174 180
PILOT
032
PIONEER
014 086 149 163
PORTLAND
160 161 164 189
PROTEC
145
QUARTER
035
QUARTZ
035
QUASAR
172 173 174
WARDS
024 032 037 041 138 139
145 147 149 150 174 177
021 024 032 035 041 138
139 142 147 153 154 171
172 173 174 177 185
WHITE WEST
139
RADIO SHACK
XR-1000
138 145 173 174
032
YAMAHA
014 035 074 175
RANDEX
032
ZENITH
002 003 014 039 159 188
RCA
143 149 150 167 168 169
170 171 172 173 174 181
187
RADIX
54
Troubleshooting Guide
Check the following before requesting service.
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
The AC power cord is not connected.
Connect the AC power cord
to the AC outlet
TV station experiencing problems.
Try another channel.
Picture control is not adjusted.
Check picture control adjustments.
Possible local interference.
Check for source of reception disturbance.
Power
No power
TV broadcast reception
Poor or no picture.
Antenna/Cable connector is not connected. Check Cable connection or VHF/UHF ant.
Picture wobbles
or drifts.
No Cable reception.
No reception above
CH13.
Poor or no sound.
TV station experiencing problems.
Try another channel.
Cable TV channel is scrambled.
A Cable box needs to be used (if desired).
Possible local interference.
Check for source of reception disturbance.
Cable connected or not connected.
Check all Cable connections.
TV/Cable set to TV.
Set TV/Cable to Cable
Cable TV service interrupted.
Contact your Cable TV company.
TV/Cable set to TV.
Set TV/Cable to Cable.
TV station experiencing problems.
Try another channel.
MUTE button is pressed.
Press MUTE button again.
Possible local interference.
Check for source of reception disturbance.
Antenna/Cable connector is not connected. Check Cable connection or VHF/UHF ant.
TV Shuts off.
Closed Captioning
not working.
Volume is set to minimum.
Increase volume.
Sleep Timer is set.
Set Sleep Timer to "Off".
Off Timer is set.
Clear Off Timer.
TV Signal is weak.
Check Cable or VHF/UHF antenna.
TV station experiencing problems or
program tuned is not closed captioned.
Try another channel.
The remote control is not aimed at the
sensor.
Aim the remote control at the Remote
sensor.
Distance is too far or too much light in the
room.
Operate within 23 feet or reduce the
light in the room.
Remote Control
Remote control
does not operate.
There is an obstacle in the path of the beam. Clear the path of the beam.
The batteries are weak.
Replace the batteries.
The batteries are not inserted correctly.
Insert correctly.
Block item is set to "Off".
Set the block item "On".
News or sports event being broadcast.
Parental Control does not work with
News or sporting events.
Ratings not set.
Set ratings as desired.
V-CHIP
Parental Control not
Working properly.
55
Troubleshooting Guide
SYMPTOM
POSSIBLE SOLUTIONS
DVD
Playback does not start
No disc is inserted.
The disc may be dirty. Clean up the disc.
=The disc is badly distorted.
No picture
=
No sound
Check the input selector of the amplifier is set properly.
The unit is in the Special playback mode.
=Select the correct Audio Output position on AV amplifier.
Picture is distorted during REVIEW.
=
Stopping playback, search, slowmotion play or repeat play, etc.
cannot be performed.
=
No 4:3 (16:9) picture
=
No on-screen display
=
no surround sound
=
The unit or remote operation key is
not functioning.
=
Playback does not start when the
title is selected.
=
Audio soundtrack and/or subtitle
language is not changed when you
playback a DVD.
=
=
=
TV/DVD selector is not set correctly.
=
=
The picture will be distorted occasionally.
Some discs may not do some of the functions.
The setup does not match your TV.
Turn on on-screen display.
The setup does not match your stereo system.
Turn off the unit and unplug the AC power cord for several minutes,
then replug it.
Check the "parental Lock Level" setup.
Multilingual language is not recorded on the DVD disc.
Some discs have no subtitles.
Subtitles are cleared. Press SUBTITLE.
=
No subtitle
=
Angle cannot be changed.
=
appears on the screen
=
Multi-angles are not recorded on the DVD disc.
The function is prohibited with the unit or the disc.
56
Reception Disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.
Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of
television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV
system, the disturbance may be caused by the local cable company broadcast.
IGNITION:
Black spots or horizontal streaks may appear, picture may flutter or drift.
Usually caused by interference from automobile ignition systems, neon
lamps, electric drills and other electric appliances.
GHOSTS:
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected from tall buildings, hills or other
objects. Changing the direction or position of the antenna may improve the
reception.
SNOW:
If your receiver is located in the fringe area of a television station where the
signal is weak, your picture may be marred by the appearance of small dots.
When the signal is extremely weak, it maybe necessary to install an
external antenna to improve the picture.
RADIO FREQUENCY INTERFERENCE:
This interference produces moving ripples or diagonal streaks, and in some
cases, causes loss of contrast in the picture.
PICTURE SIZE VARIATION:
A slight picture size variation is quite normal when you adjust the
CONTRAST or BRIGHTNESS setting.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the
receiver may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping
the plastic parts. Mild soap and a soft, damp cloth may be used.
57
Specifications
Power Supply:
AC 120V, 60Hz
AC 120V, 60Hz
Power Consumption:
120W
150W
Dimensions:
23.2(W)r19.5(H)r18.5(D) inch
26.9(W)r21.9(H)r18.9(D) inch
Weight(kg/lb):
27 kg/60 lb
40 kg/88 lb
CRT:
20" SCREEN
24" SCREEN
Audio Output:
2.5Wr2
3Wr2
TELEVISION
Color System:
TV: NTSC-M
AV: NTSC 3.58/4.43, PAL 4.43
Receiving channel:
VHF
UHF
Cable
Total
Antenna Impedance:
VHF/UHF 75 ohm
2-13
14-69
2-69, (A-6)-(A-1), A-W, (W+1)-(W+28)
181 channels
DVD/VCD/CD player
Video out:
CVBS
Audio out:
2 channels
Digital out:
Coaxial
Disc diameter:
120mm, 80mm
Pickup:
1-Lens 2-Beams System
Accessories:
Remote controllerr1
Design and specifications are subject to change without notice.
58