Smart-UPS APC Smart-UPS 2200VA RM 3U 120V/230V In 120V Out APC Smart-UPS, 1600 Watts / 2200 VA,Input 120V, 230V / Output 120V, Interface Port DB-9 RS-232, SmartSlot, Rack Height 3 U Includes: CD with software, Country-specific detachable power cord, Smart UPS signalling RS-232 cable, User Manual Standard Lead Time: Usually Ships within 4 Weeks Smart-UPS Features & Benefits Availability Boost and Trim Automatic Voltage Regulation (AVR) Intelligent Battery Management Power conditioning Temperaturecompensated battery charging Automatic restart of loads after UPS shutdown Automatic self-test Gives higher application availability by correcting low and high voltage conditions without using the battery. Maximizes battery performance, life, and reliability through intelligent, precision charging. Protects connected loads from surges, spikes, lightning, and other power disturbances. Prolongs battery life by regulating the charge voltage according to battery temperature. Automatically starts up the connected equipment upon the return of utility power. Periodic battery self-test ensures early detection of a battery that needs to be replaced. Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery Warns when a battery is not available to provide backup power. notification Generator Compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Manageability Network manageable Provides remote management of the UPS over the network. SmartSlot Customize UPS capabilities with management cards. Audible Alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit and power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB Connectivity Provides management of the UPS via a USB port (not available on all models). Disconnected battery Warns when a battery is not available to provide backup power. notification InfraStruXure Enables centralized management via the APC InfraStruXure® Manager. Manager Compatible Serviceability User-replaceable batteries Hot-swappable batteries Predictive failure notification Resettable circuit Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Provides early-warning fault analysis ensuring proactive component replacement. Enables a quick recovery from overload events. breakers Adaptability Adjustable voltagetransfer points Adjustable voltage sensitivity Field-replaceable power distribution panel Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Ensures compatibility with equipment that has different plug types. Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals. Output Output Power Capacity 1600 Watts / 2200 VA Max Configurable Power 1600 Watts / 2200 VA Nominal Output Voltage 120V Output Voltage Distortion Less than 5% at full load Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal Crest Factor up to 5 : 1 Waveform Type Sine wave Output Connections (8) NEMA 5-15R Input Nominal Input Voltage 120V,230V Input Frequency 50/60 Hz +/- 3 Hz (auto sensing) Input Connections NEMA 5-20P Schuko CEE 7 / EU1-16P British BS1363A Italian CEI 23-16 Cord Length 1.83 meters Input voltage range for main operations --V Input voltage adjustable range for --V mains operation Batteries & Runtime Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof Typical recharge time 3 hour(s) Replacement Battery RBC12 RBC™ Quantity 1 Typical Backup Time at Half Load 24.5 minutes (800 Watts) Typical Backup Time at Full Load 6.8 minutes (1600 Watts) Runtime Chart Smart-UPS Communications & Management Interface Port(s) DB-9 RS-232,SmartSlot Available SmartSlot™ Interface Quantity 1 Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays Emergency Power Off (EPO) Optional Surge Protection and Filtering Surge energy rating 480 Joules Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 Physical Maximum Height 132.00 mm Maximum Width 483.00 mm Maximum Depth 635.00 mm Rack Height 3U Net Weight 46.82 KG Shipping Weight 55.92 KG Shipping Height 254.00 mm Shipping Width 622.00 mm Shipping Depth 953.00 mm Color Beige Environmental Operating Environment 0 - 40 °C Operating Relative Humidity 0% Operating Elevation 0-3000 meters Storage Temperature -15 - 45 °C Storage Relative Humidity 0% Storage Elevation 0-15000 meters Audible noise at 1 meter from surface of unit 47.00 dBA Online Thermal Dissipation 275.00 BTU/hr Protection Class -- Conformance Regulatory Approvals CSA,FCC Part 15 Class A,UL 1778 Standard Warranty 2 years repair or replace,optional on-site warranties available,optional extended warranties available ROHS/WEEE Compliance RoHS 7b Exemption **The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.