PTZ Optics 20X-USB User manual

PTZ Optics 20X-USB
User Manual
V1.0
(English)
Preface
Thanks for using this USB3.0 HD Video Conferencing Camera.
This manual introduces the function, installation and operation of the HD camera. Prior to installation and usage, please
read the manual thoroughly.
Precautions
This product can only be used in the specified conditions in order to avoid any damage to the camera:
n
Don’t subject the camera to rain or moisture.
n
Don’t remove the cover. Otherwise, you may get an electric shock. In case of abnormal operation, contact the
authorized engineer.
n
Never operating under unspecified temperature , humidity and power supply;
n
Please use the soft dry cloth to clean the camera. If the camera is very dirty, clean it with diluted neuter detergent;
do not use any type of solvents, which may damages the surface.
Note
This is class A production. Electromagnetic radiation at the specific frequency may affect the image quality of TV in
home environment.
1
Contents
1、 Note ································································································ 3
2、 Supplied Accessories············································································· 4
3、 Quick Start························································································· 5
4、 Features ···························································································· 8
5、 Product Specification ············································································ 9
6、 Main Unit ························································································ 11
7、 IR Remote Controller Explanation ··························································· 12
8、 Use IR Remote Controller ····································································· 14
9、 RS-232 Interface ················································································ 17
10、 Serial Communication Control ······························································· 19
11、 Menu Setting ···················································································· 33
12、 Maintains and Trouble Shooting ····························································· 38
Supplied Accessories
When you unpack, check that all the supplied accessories are included:
Camera ....................................... 1
AC power adaptor ...................... 1
Power cord ................................... 1
RS232 cable ................................. 1
Remote controller ........................ 1
User manual ............................... 1
2
Note
l Electric Safety
Installation and operation must accord with electric safety standard.
l Caution to transport
Avoid stress, vibration and soakage in transport, storage and installation.
l Polarity of power supply
The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power supply plug drawing as
follows.
l Careful of installation
Do not grasp the camera head when carrying the camera. Don’t turn camera head by hand. Doing so may result in
mechanical damage.
Don’t apply in corrosive liquid, gas or solid environment to avoid damaging the cover which is made up of plastic
material.
To make sure no obstacle in rotation range.
Never power on before installation is not completed.
l Don’t dismantle the camera
We are not responsible for any unauthorized modification or dismantling.
CAUTION!
The specific frequency of electromagnetic field may affect the image of the camera!
3
Quick Start
Step1. Please check connections are correct before starting
Step2. Setting switches
Set both of the switch1 and switch2 to "OFF'. That is "Normal Working Mode".
SW-1
SW-2
Modes
1
OFF
OFF
Normal Working Mode
2
ON
OFF
-
4
3
OFF
ON
-
4
ON
ON
-
Step3. Setting of the system select switch
The option of video format:
VIDEO SYSTEM
0
-
8
-
1
-
9
-
2
1080i60
A
-
3
1080i50
B
-
4
720p60
C
-
5
720p50
D
576i
6
1080p30
E
480i
7
1080p25
F
-
CAUTION:
a.
After changing the switch, you need to restart the camera to take effect.
Step4. Press the Switch ON/OFF button on the rear of the camera, the power lamp light.
Step5. Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to the center, the
process of initialization is finished. (Note: If the position preset 0 has been stored, the position preset 0 will be called up after
initialization)
Step6. (Optional) If you want to restore the factory default settings, Press [MENU] button to display the OSD menu. Select
the item [MENU] -> [RESTORE DEFAULT] -> [Restore]. Set the value [Yes], press [HOME] button to restore the factory
default settings.
5
RESTORE DEFAULT
Restore
Yes
Change Value
[Home] OK
[Menu] Back
Features
1. Support USB3.0 transmission, the highest rate up to 5Gbps, ensure real-time lossless HD data
transmission.
2. Support HD USB3.0,HD-SDI(optional),Network stream, three-stream simultaneous output, compatible with CVBS.
3. Adopt Panasonic's 1/3 inch, 2.12 million pixels high quality HD CMOS sensor, which can realize maximum 1920 x
1080 high resolution image with high quality, maximum output frame rate reach 30 frames per second.
4. High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithm, effectively reduce the noise, even
under low illumination conditions, picture can still keep clean and clear, SNR more than 55dB.
5. Use TAMRON high quality super telephoto lens, support 20x optical zoom, and 16x digital zoom.
6. Using RS232/485 interface, all the parameters of the camera can be remote controlled by the high-speed
communications. Support Web control.
6
Product Specification
Model
20X-USB
Name
PTZ Optics USB3.0 Type HD Color Video Camera
Camera
1080i/60,1080i/50, 1080p/30,
Video System
1080p/25, 720p/60, 720p/50,
NTSC, PAL
Sub stream
resolution
640x360,320x180
128K,256K,384K,512K,768K,1024
1/3", CMOS, Total Pixel: 2.2M,
Sensor
Effective Pixel: 2.12M
Rate
K,1536K,2048K,3072K,4096K,
5120K,6144K,8192K Optional,
or Customed
Scanning Mode
Progressive
Rate control
20x, f4.42mm ~ 88.5mm, F1.8
Lens
~ F2.8
Digital Zoom
16x
Maximun frame rate
I frame interval
Variable rate, fixed rate, fixed
quality
PAL:1-25, NTSC:1-30 is 30.
Customizable (greater than the
maximum frame rate)
Minimal Illumination 0.5 Lux @ (F1.8, AGC ON)
Video format
PAL,NTSC
Shutter
Web frame
Main frame,Sub frame
1/25s ~ 1/10000s
Auto, Indoor, Outdoor,
White Balance
web video size
One-Push, Manual
Backlight
2D&3D
Reduction
Reduction
Video S/N
≥55dB
SD Output
60.7° ~ 3.36°
Network interface
34.1° ~ 1.89°
Audio Input
View
Vertical
View
Angle
of
Digital
Noise
HD Output
Digital Noise
Horizontal Angle of
full-screen
1xUSB3.0,B-type female
Support
Compensation
Appropriate size, original size,
1xHDMI (Optional):Verision 1.3
1xCVBS: RCA jack, 1Vp-p, 75Ω
1xRJ45: 10M/100M Adaptive
7
Ethernet ports
1-ch 3.5mm audio interface, LINE
IN/LINE OUT
Horizontal Rotation
Range
1xRS-232 IN: 8pin Min DIN, Max
±170°
Distance: 30m, Protocol: VISCA/
Control Input/Output
Vertical Rotation
Range
-30° ~ +90°
Pelco-D/Pelco-P
1xRS-485: 2pin phoenix port,
Max Distance: 1500m, Protocol:
VISCA/Pelco-D/Pelco-P
Pan Speed Range
1.7° ~ 100°/s
Power Connector
JEITA type (DC IN 12V)
Tilt Speed Range
1.7° ~ 69.9°/s
Input Voltage
12V DC (10.8 ~ 13.0V DC)
Ceiling Installation
Support
Current Consumption
2.0A (Max)
Number of Preset
245
Operating Temperature
-5°C ~ 40°C
Preset Accuracy
0.1°
Storage Temperature
-20°C ~ 60°C
H264,JPEG
Power Consumption
18W (Max)
Main stream, Sub stream
Dimensions
141mm x 169mm x 176mm
1920x1080,1280x720
Weight
1.5Kg
Video coding
standards
Video frame
Main stream
resolution
8
Main Unit
1. Audio LINE IN Interface
7. RS232 IN jack
2. Audio LINE OUT Interface
8. RS232 OUT jack
3. CVBS Interface
9. Network
4. Dip switches
10. USB3.0
5. System select switch
11. DC 12V jack
6. RS485 jack
12. Power switch
13. HDMI
9
IR Remote Controller Explanation
0. Standby Button
Press this button to enter standby mode. Press it again to
enter normal mode.
(Note:
Power
consumption
in
standby
mode
is
approximately half of the normal mode)
1. Position Buttons
To set preset or call preset
2. * Button
3. Set/Clear Preset Buttons
Set preset: Store a preset position
[SET PRESET] + Numeric button (0-9): Setting a
corresponding numeric key preset position
Clear preset: Erase a preset position
[CLEAR PRESET] + Numeric button (0-9)
Or: [*]+[#]+[CLEAR PRESET]: Erase all the preset
individually
4. BLC (Backlight Compensation) Button
BLC ON/OFF: Press this button to enable the backlight
compensation. Press it again to disable the backlight
compensation.(NOTE: Effective
only in auto exposure mode)
Note: If a light behind the subject, the subject will
become dark. In this case, press the backlight ON / OFF button. To cancel this function, press the backlight ON / OFF
button.
5. Focus Buttons
Used for focus adjustment.
10
Press [AUTO] adjust the focuses on the center of the object automatically. To adjust the focus manually, press the
[MANUAL] button, and adjust it with [Focus+] (Focus on far object) and [Focus-] (Focus on near object)
6. Camera Select Buttons
Press the button corresponding to the camera you want to operate with the remote controller.
7. # Button
8. Pan/Tilt Control Buttons
Press arrow buttons to perform panning and tilting. Press [HOME] button to face the camera back to front
9. Menu Setting
Menu button: Press this button to enter or exit the OSD menu
10. Zoom Buttons
Zoom : Zoom In
Zoom : Zoom Out
11. Set Camera IR Address Buttons
[*]+[#]+[F1]: Address1
[*]+[#]+[F2]: Address2
[*]+[#]+[F3]: Address3
[*]+[#]+[F4]: Address4
11
USE IR Remote Controller
When the camera is working, you can use remote
Press and hold the up/down/left/right button, the
controller to perform panning, tilting, zooming and
camera will keep rotating from slow to fast, until it run to
focusing, store and call back preset positions.
the mechanical limit; the camera stops as soon as the
Button Instruction:
button is released.
1. In this instruction, ‘press the button’ means the
2. Zoom
press and relax the two actions. Such as ‘press
[HOME] button’ means to press the [HOME] key and
then relax action, and a special note will be given if a hold
down for more than one second is required.
2. When a button-combination is required, do it in
sequence. For example, ‘[*] + [#] + [F1]’means press [*]
first and then press [#] and press [F1] at last.
1. Pan/Tilt Control
Zoom Out:
press [ZOOM ] button
Zoom In:
press [ZOOM ] button
Press and hold the button, the camera will keep
zooming in or zooming out and it stops as soon as the
button is released.
Move up:
Press [ ]
Move down:
Press [ ]
Move left:
Press [ ]
Move right:
Press [ ]
Face the camera back to front:
Press [HOME]
12
3. Focus Control
Focus Far: Press [FOCUS+] button (NOTE: Effective
only in manual focus mode)
Focus Near: Press [FOCUS-] button (NOTE: Effective
only in manual focus mode)
Press and hold the button, the action of focus continues
and stops as soon as the button is released.
1. To store a preset position: The users should press
the [SET PRESET] button first and then press the
AUTO: Change focus mode to AF, adjusting the focus
automatically.
numeric button 0-9.
10 preset positions in total are available.
MANUAL: Change focus mode to MF, adjusting the
focus manually.
2. To erase the memory content of a preset position:
The users should press the [CLEAR PRESET] button first
and then press the numeric button 0-9.
4. Backlight Switch
Note:
Press [*]+[#]+[CLEAR PRESET] will erase all
preset individually positions in the memory.
BLC ON/OFF: Press this button to enable the backlight
compensation. Press it again to disable the backlight
compensation. (Note: Backlight is only effective in full
auto exposure mode)
6. Recalling the Preset
5. Presets Set/Clear
13
7. Camera Selection
Press the button corresponding to the camera you
want to operate.
Press any of the numeric buttons 0-9 directly to
recall stored preset positions and settings.
8. Camera IR Address Set
Note:
No action is executed if a relative preset position is
not stored.
[*]+[#]+[F1]: Address1
[*]+[#]+[F2]: Address2
[*]+[#]+[F3]: Address3
[*]+[#]+[F4]: Address4
14
RS-232 Interface
Camera
Windows DB-9
1.DTR
1.CD
2.DSR
2.RXD
3.TXD
3.TXD
4.GND
4.DTR
5.RXD
5.GND
6.GND
6.DSR
7.IR OUT
7.RTS
8.NC
8.CTS
9.RI
Camera
Mini DIN
No.
Function
1
DTR
2
DSR
1.DTR
1.DTR
3
TXD
2.DSR
2.DSR
4
GND
3.TXD
3.TXD
5
RXD
4.GND
4.GND
6
GND
5.RXD
5.RXD
6.GND
6.GND
7
IR OUT
7.IR OUT
7.NC
8
NC
8.NC
8.NC
VISCA Network Configuration
15
Serial Communication Control
In default working mode, the camera is able to connect to a VISCA controller with RS232C serial interface.
Ø
RS232 Communication Control The camera can be controlled via RS232 ,the parameters of RS232C are as follows:
Baud rate: 2400/4800/9600 bit/s.
Start bit: 1 bit.
Data bit: 8 bits.
Stop bit: 1bit.
Parity bit: none.
Ø
RS485 Communication Control 16
The camera can be controlled via RS485, Half-duplex mode, supports VISCA or Pelco-D or Pelco-P protocol,
supports the following configurations:
Baud rate: 2400/4800/9600 bit/s.
Start bit: 1 bit.
Data bit: 8 bits.
Stop bit: 1bit.
Parity bit: none.
Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to the center, the process
of initialization is finished. (Note: If the position preset 0 has been stored, the position preset 0 will be called up after
initialization) Then the users can control the camera with commands in the command list.
17
VISCA Command List
Part 1 Camera-Issued Messages
Ack/Completion Message
Command
ACK/Comletion
Messages
Function
Command Packet
z0 4y FF
ACK
(y: Socket No.)
Completion
Comments
Return when the command is accepted.
z0 5y FF
Return when the command has been
(y: Socket No.)
executed.
z = Camera Address + 8
Error Messages
Command
Function
Command Packet
Comments
Returned when the command format is
Syntax Error
z0 60 02 FF
different or when a command with illegal
command parameters is accepted.
Indicates that two sockets are already
Command Buffer Full
z0 60 03 FF
being used(executing two commands)
and the command could not be accepted
when received.
Returned when a command which is
Error Messages
Command Canceled
z0 6y 04 FF
(y: Socket No.)
being executed in a socket specified by
the cancel command is canceled. The
completion message for the command is
not returned.
Returned when no command is executed
No Socket
z0 6y 05 FF
in a socket specifild by the cancel
(y: Socket No.)
command, or when an invalid socket
number is specified.
18
Returned when a command canot be
Command Not Executable
z0 6y 41 FF
executed due to current conditions.For
(y: Execution command Socket
example, when commands controlling the
No. Inquiry command: 0)
focus manually are received during auto
focus.
Part 2 Camera Control Command
Command
Function
Command Packet
Comments
AddressSet
Broadcast
88 30 01 FF
Address setting
IF_Clear
Broadcast
88 01 00 01 FF
I/F Clear
On
8x 01 04 00 02 FF
Off
8x 01 04 00 03 FF
Stop
8x 01 04 07 00 FF
Tele(Standard)
8x 01 04 07 02 FF
Wide(Standard)
8x 01 04 07 03 FF
Tele(Variable)
8x 01 04 07 2p FF
Wide(Variable)
8x 01 04 07 3p FF
Direct
8x 01 04 47 0p 0q 0r 0s FF
Stop
8x 01 04 08 00 FF
Far(Standard)
8x 01 04 08 02 FF
Near(Standard)
8x 01 04 08 03 FF
Far(Variable)
8x 01 04 08 2p FF
Near(Variable)
8x 01 04 08 3p FF
Direct
8x 01 04 48 0p 0q 0r 0s FF
Auto Focus
8x 01 04 38 02 FF
Manual Focus
8x 01 04 38 03 FF
Auto/Manual
8x 01 04 38 10 FF
CAM_Power
CAM_Zoom
CAM_Focus
CAM_ZoomFocus
CAM_WB
Power ON/OFF
p = 0(low) - 7(high)
pqrs: Zoom Position
p = 0(low) - 7(high)
pqrs: Focus Position
AF On/Off
8x 01 04 47 0p 0q 0r 0s
pqrs: Zoom Position
0t 0u 0v 0w FF
tuvw: Focus Position
Auto
8x 01 04 35 00 FF
Normal Auto
Indoor mode
8x 01 04 35 01 FF
Indoor mode
Direct
19
CAM_RGain
CAM_Bgain
CAM_AE
CAM_SlowShutter
CAM_Iris
CAM_Gain
CAM_Bright
Outdoor mode
8x 01 04 35 02 FF
Outdoor mode
OnePush mode
8x 01 04 35 03 FF
One Push WB mode
Manual
8x 01 04 35 05 FF
Manual Control mode
OnePush trigger
8x 01 04 10 05 FF
One Push WB Trigger
Reset
8x 01 04 03 00 FF
Up
8x 01 04 03 02 FF
Down
8x 01 04 03 03 FF
Direct
8x 01 04 43 00 00 0p 0q FF
Reset
8x 01 04 04 00 FF
Up
8x 01 04 04 02 FF
Down
8x 01 04 04 03 FF
Direct
8x 01 04 44 00 00 0p 0q FF
pq: B Gain
Full Auto
8x 01 04 39 00 FF
Automatic Exposure mode
Manual
8x 01 04 39 03 FF
Manual Control mode
Shutter priority
8x 01 04 39 0A FF
Iris priority
8x 01 04 39 0B FF
Iris Priority Automatic Exposure mode
Bright
8x 01 04 39 0D FF
Bright Mode(Manual control)
AutoSlowShutterLimit
8x 01 04 2A 0p 00 FF
Reset
8x 01 04 0B 00 FF
Up
8x 01 04 0B 02 FF
Down
8x 01 04 0B 03 FF
Direct
8x 01 04 4B 00 00 0p 0q FF
Reset
8x 01 04 0C 00 FF
Up
8x 01 04 0C 02 FF
Down
8x 01 04 0C 03 FF
Direct
8x 01 04 0C 00 00 0p 0q FF
pq: Gain Position
Gain Limit
8x 01 04 2C 0p FF
p:
Reset
8x 01 04 0D 00 FF
Up
8x 01 04 0D 02 FF
Down
8x 01 04 0D 03 FF
Direct
8x 01 04 0D 00 00 0p 0q FF
20
Manual Control of R Gain
pq: R Gain
Manual Control of B Gain
Shutter
Priority
Automatic
Exposure
mode
Iris Setting
pq: Iris Position
Gain Setting
Gain
Position
Bright Setting
pq: Bright Position
On
8x 01 04 3E 02 FF
Off
8x 01 04 3E 03 FF
Reset
8x 01 04 0E 00 FF
Up
8x 01 04 0E 02 FF
Down
8x 01 04 0E 03 FF
Direct
8x 01 04 4E 00 00 0p 0q FF
On
8x 01 04 33 02 FF
Off
8x 01 04 33 03 FF
Auto
8x 01 04 50 02 FF
Manual
8x 01 04 50 03 FF
CAM_NR(2D)Level
-
8x 01 04 53 0p FF
p: NR Setting (0: Off, level 1 to 5)
CAM_NR(3D)Level
-
8x 01 04 54 0p FF
p: NR Setting (0: Off, level 1 to 8)
CAM_Flicker
-
8x 01 04 23 0p FF
CAM_DHotPixel
-
8x 01 04 56 0p FF
Auto
8x 01 04 05 02 FF
Sharpness Auto
Manual
8x 01 04 05 02 FF
Sharpness Manual
Reset
8x 01 04 02 00 FF
CAM_Aperture(sharp
Up
8x 01 04 02 02 FF
ness)
Down
8x 01 04 02 03 FF
Direct
8x 01 04 42 00 00 0p 0q FF
Off
8x 01 04 63 00 FF
B&W
8x 01 04 63 04 FF
Reset
8x 01 04 3F 00 pp FF
Set
8x 01 04 3F 01 pp FF
Recall
8x 01 04 3F 02 pp FF
On
8x 01 04 61 02 FF
Off
8x 01 04 61 03 FF
On
8x 01 04 66 02 FF
Off
8x 01 04 66 03 FF
CAM_ExpComp
CAM_BackLight
CAM_NR(2D)Mode
CAM_ApertureMode(
sharpness)
CAM_PictureEffect
CAM_Memory
CAM_LR_Reverse
CAM_PictureFlip
21
Exposure Compensation On/Off
Exposure Compensation Amount Setting
pq: ExpComp Position
Back Light Compensation On/Off
ND2D Auto/Manual
p: Flicker Settings
(0: Off, 1: 50Hz, 2: 60Hz)
p: Dynamic Hot Pixel Setting (0: 0ff,
level 1 to 6)
Aperture Control
pq: Aperture Gain
Picture Effect Setting
pp: Memory Number(=0 to 127)
Image Flip Horizontal On/Off
Image Flip Vertical On/Off
CAM_RegisterValue
-
8x 01 04 24 mn 0p 0q FF
CAM_ColorGain
Diret
8x 01 04 49 00 00 00 0p FF
SYS_Menu
Off
8x 01 06 06 03 FF
Up
8x 01 06 01 VV WW 03 01 FF
Down
8x 01 06 01 VV WW 03 02 FF
Left
8x 01 06 01 VV WW 01 03 FF
Right
8x 01 06 01 VV WW 02 03 FF
Upleft
8x 01 06 01 VV WW 01 01 FF
Upright
8x 01 06 01 VV WW 02 01 FF
DownLeft
8x 01 06 01 VV WW 01 02 FF
DownRight
8x 01 06 01 VV WW 02 02 FF
Stop
8x 01 06 01 VV WW 03 03 FF
Pan_tiltDrive
AbsolutePosition
RelativePosition
8x 01 06 02 VV WW
(200%)
Turns off the menu screen
VV: Pan speed 0x01 (low speed) to 0x18
(high speed)
WW: Tilt speed 0x01 (low speed) to 0x14
(high speed)
YYYY: Pan Position
ZZZZ: Tilt Position
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
Reset
8x 01 06 05 FF
LimitClear
p: Color Gain setting 0h (60%) to Eh
8x 01 06 03 VV WW
8x 01 06 04 FF
Pan_tiltLimitSet
pp: Register Value (=00-7F)
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
Home
LimitSet
mm: Register No. (=00-7F)
8x 01 06 07 00 0W
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 07 01 0W
07 0F 0F 0F 07 0F 0F 0F FF
W: 1 UpRight 0: DownLeft
YYYY: Pan Limit Position
ZZZZ: Tilt Position
High
8x 01 04 58 01 FF
Normal
8x 01 04 58 02 FF
Low
8x 01 04 58 03 FF
CAM_SettingReset
Reset
8x 01 04 A0 10 FF
Reset Factory Setting
CAM_Brightness
Direct
8x 01 04 A1 00 00 0p 0q FF
pq: Brightness Position
CAM_Contrast
Direct
8x 01 04 A2 00 00 0p 0q FF
pq: Contrast Position
Off
8x 01 04 A4 00 FF
Flip-H
8x 01 04 A4 01 FF
Flip-V
8x 01 04 A4 02 FF
CAM_AFSensitivity
CAM_Flip
22
AF Sensitivity High/Normal/Low
Single Command For Video Flip
Flip-HV
8x 01 04 A4 03 FF
CAM_SettingSave
Save
8x 01 04 A5 10 FF
Save Current Setting
CAM_Iridix
Direct
8x 01 04 A7 00 00 0p 0q FF
pq: Iridix Position
High
8x 01 04 A9 00 FF
High
Normal
8x 01 04 A9 01 FF
Normal
Low
8x 01 04 A9 02 FF
Low
Top
8x 01 04 AA 00 FF
Center
8x 01 04 AA 01 FF
Bottom
8x 01 04 AA 02 FF
Direct
8x 01 04 4F 00 00 00 0p FF
CAM_AWBSensitivit
y
CAM_AFZone
CAM_ColorHue
AF Zone weight select
p: Color Hue setting 0h (− 14 dgrees) to
Eh ( +14 degrees
Part 3 Query Command
Inquiry Command List
Command
CAM_PowerInq
CAM_ZoomPosInq
CAM_FocusAFMode
Inq
CAM_FocusPosInq
CAM_WBModeInq
Command packed
8x 09 04 00 FF
8x 09 04 47 FF
8x 09 04 38 FF
8x 09 04 48 FF
8x 09 04 35 FF
Inquiry Packet
Comments
y0 50 02 FF
On
y0 50 03 FF
Off(Standby)
y0 50 04 FF
Internal power ciruit error
y0 50 0p 0q 0r 0s FF
pqrs: Zoom Position
y0 50 02 FF
Auto Focus
y0 50 03 FF
Manual Focus
y0 50 0p 0q 0r 0s FF
pqrs: Focus Position
y0 50 00 FF
Auto
y0 50 01 FF
Indoor mode
y0 50 02 FF
Outdoor mode
y0 50 03 FF
OnePush mode
y0 50 05 FF
Manual
CAM_RGainInq
8x 09 04 43 FF
y0 50 00 00 0p 0q FF
pq: R Gain
CAM_BGainInq
8x 09 04 44 FF
y0 50 00 00 0p 0q FF
pq: B Gain
CAM_AEModeInq
8x 09 04 39 FF
y0 50 00 FF
Full Auto
y0 50 03 FF
Manual
23
y0 50 0A FF
Shutter priority
y0 50 0B FF
Iris priority
y0 50 0D FF
Bright
CAM_ShutterPosInq
8x 09 04 4A FF
y0 50 00 00 0p 0q FF
pq: Shutter Position
CAM_IrisPosInq
8x 09 04 4B FF
y0 50 00 00 0p 0q FF
pq: Iris Position
CAM_BrightPosInq
8x 09 04 4D FF
y0 50 00 00 0p 0q FF
pq: Bright Position
y0 50 02 FF
On
y0 50 03 FF
Off
y0 50 00 00 0p 0q FF
pq: ExpComp Position
y0 50 02 FF
On
y0 50 03 FF
Off
y0 50 02 FF
Auto Noise 2D
y0 50 03 FF
Manual Noise 3D
CAM_ExpCompMod
eInq
CAM_ExpCompPosI
nq
CAM_BacklightMode
Inq
CAM_Nosise2DMode
Ing
8x 09 04 3E FF
8x 09 04 4E FF
8x 09 04 33 FF
8x 09 04 50 FF
CAM_Nosise2DLevel
8x 09 04 53 FF
y0 50 0p FF
Noise Reduction (2D) p: 0 to 5
CAM_Noise3DLevel
8x 09 04 54 FF
y0 50 0p FF
Noise Reduction (3D) p: 0 to 8
8x 09 04 55 FF
y0 50 0p FF
CAM_FlickerModeIn
q
CAM_ApertureModeI
nq(Sharpness)
CAM_ApertureInq(Sh
arpness)
CAM_PictureEffectM
odeInq
p: Flicker Settings(0: OFF, 1: 50Hz, 2:
60Hz)
y0 50 02 FF
Auto Sharpness
8x 09 04 05 FF
y0 50 03 FF
Manual Sharpness
8x 09 04 42 FF
y0 50 00 00 0p 0q FF
pq: Aperture Gain
y0 50 02 FF
Off
y0 50 04 FF
B&W
y0 50 0p FF
p: Memory number last operated.
y0 50 02 FF
On
y0 50 03 FF
Off
y0 50 02 FF
On
y0 50 03 FF
Off
y0 50 02 FF
On
y0 50 03 FF
Off
8x 09 04 63 FF
CAM_MemoryInq
8x 09 04 3F FF
SYS_MenuModeInq
8x 09 06 06 FF
CAM_LR_ReverseInq
8x 09 04 61 FF
CAM_PictureFlipInq
8x 09 04 66 FF
24
CAM_RegisterValueI
8x 09 04 24 mm FF
y0 50 0p 0p ff
CAM_ColorGainInq
8x 09 04 49 FF
y0 50 00 00 00 0p FF
CAM_IDInq
8x 09 04 22 FF
y0 50 0p 0q 0r 0s FF
nq
mm: Register No. (00 to FF) pp: Register
Value (00 to FF)
p: Color Gain setting 0h (60%) to Eh
(200%)
pqrs: Camera ID
ab: Factory Code(00: VHD, 01:MR,
08:T)
cd: Hardware Version
CAM_VersionInq
8x 09 00 02 FF
y0 50 ab cd
mn pq rs tu vw FF
mnpq: ARM Version
rstu: FPGA Version
vw: Camera model
01: C Type
02: M Type
03: S Type
VideoSystemInq
8x 09 06 23 FF
IR_Receive
8x 09 06 08 FF
Pan-tiltMaxSpeedInq
8x 09 06 11 FF
Pan-tiltPosInq
8x 09 06 12 FF
y0 50 00 FF
1920x1080i60
y0 50 01 FF
1920x1080p30
y0 50 02 FF
1280x720p60
y0 50 04 FF
NTSC
y0 50 05 FF
NTSC
y0 50 06 FF
NTSC
y0 50 07 FF
1920x1080p60
y0 50 08 FF
1920x1080i50
y0 50 09 FF
1920x1080p25
y0 50 0A FF
1280x720p50
y0 50 0C FF
PAL
y0 50 0D FF
PAL
y0 50 0E FF
PAL
y0 50 02 FF
On
y0 50 03 FF
Off
y0 50 ww zz FF
ww: Pan Max Speed
zz: Tilt Max Speed
y0 50 0w 0w 0w 0w
wwww: Pan Position
0z 0z 0z 0z FF
zzzz: Tilt Position
25
CAM_TypeInq
8x 09 00 03 FF
y0 50 01 FF
C Type
y0 50 02 FF
M Type
y0 50 03 FF
S Type
Version dater: Big Version Numberss:
CAM_DateInq
8x 09 00 04 FF
y0 50 0r ss uu uu vv ww 0D FF
Little Version Numberuuuu: Yearvv:
Monthww: Day
y0 50 00 FF
Mode0
y0 50 02 FF
Mode2
8x 09 04 2C FF
y0 50 0q FF
p: Gain Limit
8x 09 04 56 FF
y0 50 0q FF
CAM_ModeInq
8x 09 04 A6 FF
CAM_GainLimitInq
CAM_DHotPixelInq
CAM_AFSensitivityI
nq
8x 09 04 58 FF
p: Dynamic Hot Pixel Setting (0: 0ff,
level 1 to 6)
y0 50 01 FF
High
y0 50 02 FF
Normal
y0 50 03 FF
Low
CAM_BrightnessInq
8x 09 04 A1 FF
y0 50 00 00 0p 0q FF
pq: Brightness Position
CAM_ContrastInq
8x 09 04 A2 FF
y0 50 00 00 0p 0q FF
pq: Contrast Position
y0 50 00 FF
Off
y0 50 01 FF
Flip-H
y0 50 02 FF
Flip-V
y0 50 03 FF
Flip-HV
y0 50 00 00 0p 0q FF
pq: Iridix Position
y0 50 00 FF
Top
y0 50 01 FF
Center
y0 50 02 FF
Bottom
CAM_FlipInq
CAM_IridixInq
CAM_AFZone
CAM_ColorHueInq
CAM_AWBSensitivit
yInq
8x 09 04 A4 FF
8x 09 04 A7 FF
8x 09 04 AA FF
8x 09 04 4F FF
8x 09 04 A9 FF
y0 50 00 00 00 0p FF
p: Color Hue setting 0h (− 14 dgrees) to
Eh ( +14 degrees
y0 50 00 FF
High
y0 50 01 FF
Normal
y0 50 02 FF
Low
Block Inquiry Command List
26
Command
CAM_LensBlockInq
Command packed
8x 09 7E 7E 00 FF
Inquiry Packet
y0 50 0u 0u 0u 0u 00 00 0v 0v
0v 0v 00 0w 00
FF
Comments
uuuu: Zoom Position
vvvv: Focus Position
w.bit0: Focus Mode 1: Auto 0: Manual
pp: R_Gain
qq: B_Gain
r: WB Mode
s: Aperture
CAM_CameraBlockIn
q
8x 09 7E 7E 01 FF
y0 50 0p 0p 0q 0q 0r 0s tt 0u vv
ww 00 xx 0z
FF
tt: AE Mode
u.bit2: Back Light
u.bit1: Exposure Comp.
vv: Shutter Position
ww: Iris Position
xx: Bright Position
z: Exposure Comp. Position
CAM_OtherBlockInq
8x 09 7E 7E 02 FF
y0 50 0p 0q 00 0r 00 00 00 00
00 00 00 00 00
FF
p.bit0: Power 1:On, 0:Off
q.bit2: LR Reverse 1:On, 0:Off
r.bit3~0: Picture Effect Mode
p: AF sensitivity
q.bit0: Picture flip(1:On, 0:Off)
rr.bit6~3: Color Gain(0h(60%) to
CAM_EnlargementBl
ockInq
8x 09 7E 7E 03 FF
y0 50 00 00 00 00 00 00 00 0p
Eh(200%))
0q rr 0s 0t 0u
s: Flip(0: Off, 1:Flip-H, 2:Flip-V,
FF
3:Flip-HV)
t.bit2~0: NR2D Level
u: Gain Limit
Note:
The [x] in the above table is the camera address, [y] = [x + 8].
27
Pelco-D Protocol Command List
Function
Byte1
Byte2
Byte3
Byte4
Byte5
Byte6
Byte7
Up
0xFF
Address
0x00
0x08
Pan Speed
Tilt Speed
SUM
Down
0xFF
Address
0x00
0x10
Pan Speed
Tilt Speed
SUM
Left
0xFF
Address
0x00
0x04
Pan Speed
Tilt Speed
SUM
Right
0xFF
Address
0x00
0x02
Pan Speed
Tilt Speed
SUM
Zoom In
0xFF
Address
0x00
0x20
0x00
0x00
SUM
Zoom Out
0xFF
Address
0x00
0x40
0x00
0x00
SUM
Focus Far
0xFF
Address
0x00
0x80
0x00
0x00
SUM
Focus Near
0xFF
Address
0x01
0x00
0x00
0x00
SUM
Set Preset
0xFF
Address
0x00
0x03
0x00
Preset ID
SUM
Clear Preset
0xFF
Address
0x00
0x05
0x00
Preset ID
SUM
Call Preset
0xFF
Address
0x00
0x07
0x00
Preset ID
SUM
Auto Focus
0xFF
Address
0x00
0x2B
0x00
0x01
SUM
Manual Focus
0xFF
Address
0x00
0x2B
0x00
0x02
SUM
Query Pan Position
0xFF
Address
0x00
0x51
0x00
0x00
SUM
Query Pan Position Response
0xFF
Address
0x00
0x59
Value High
Value Low
Byte
Byte
Query Tilt Position
0xFF
Address
0x00
0x53
0x00
0x00
Query Tilt Position Response
0xFF
Address
0x00
0x5B
Value High
Value Low
Byte
Byte
Query Zoom Position
0xFF
Address
0x00
0x55
0x00
0x00
0xFF
Address
0x00
0x5D
Value High
Value Low
Byte
Byte
Query Zoom Position
Response
28
SUM
SUM
SUM
SUM
SUM
Pelco-P Protocol Command List
Function
Byte1
Byte2
Byte3
Byte4
Byte5
Byte6
Byte7
Byte8
Up
0xA0
Address
0x00
0x08
Pan Speed
Tilt Speed
0xAF
XOR
Down
0xA0
Address
0x00
0x10
Pan Speed
Tilt Speed
0xAF
XOR
Left
0xA0
Address
0x00
0x04
Pan Speed
Tilt Speed
0xAF
XOR
Right
0xA0
Address
0x00
0x02
Pan Speed
Tilt Speed
0xAF
XOR
Zoom In
0xA0
Address
0x00
0x20
0x00
0x00
0xAF
XOR
Zoom Out
0xA0
Address
0x00
0x40
0x00
0x00
0xAF
XOR
Focus Far
0xA0
Address
0x00
0x80
0x00
0x00
0xAF
XOR
Focus Near
0xA0
Address
0x01
0x00
0x00
0x00
0xAF
XOR
Set Preset
0xA0
Address
0x00
0x03
0x00
Preset ID
0xAF
XOR
Clear Preset
0xA0
Address
0x00
0x05
0x00
Preset ID
0xAF
XOR
Call Preset
0xA0
Address
0x00
0x07
0x00
Preset ID
0xAF
XOR
Auto Focus
0xA0
Address
0x00
0x2B
0x00
0x01
0xAF
XOR
Manual Focus
0xA0
Address
0x00
0x2B
0x00
0x02
0xAF
XOR
Query Pan Position
0xA0
Address
0x00
0x51
0x00
0x00
0xAF
XOR
0xA0
Address
0x00
0x59
Value High
Value Low
Byte
Byte
0xAF
XOR
0xA0
Address
0x00
0x53
0x00
0x00
0xAF
XOR
0xA0
Address
0x00
0x5B
Value High
Value Low
Byte
Byte
0xAF
XOR
0xA0
Address
0x00
0x55
0x00
0x00
0xAF
XOR
0xA0
Address
0x00
0x5D
Value High
Value Low
Byte
Byte
0xAF
XOR
Query Pan Position
Response
Query Tilt Position
Query Tilt Position
Response
Query Zoom Position
Query Zoom Position
Response
29
Menu Setting
1. MENU
EXPOSURE
Press [MENU] button to display the main menu on
Mode
Auto
the normal screen, using arrow button to move the cursor
ExpCompMode
Off
to the item to be set. Press the [HOME] button to enter the
Backlight
Off
corresponding sub-menu.
Gain Limit
3
Anti-Flicker
Off
DRC
3
MENU
Exposure
Color
Image
P/T/Z
Select Item
Noise Reduction
Change Value
Setup
[Menu] Back
Restore Default
Mode: Exposure mode. Optional items: Auto,
Manual, SAE, AAE, Bright
ExpCompMode: Exposure compensation mode,
[Home] Enter
Optional items: On, Off (Effective only in Auto
[Menu] Exit
mode)
ExpComp: Exposure compensation value,
Optional items:-7 ~ 7(Effective only in ExpComp
2. EXPOSURE
Move the cursor to the Exposure item in the main
menu and press [home] button, EXPOSURE menu
appears, as shown in the following figure.
Mode item to On)
Gain Limit: Maximum gain limit. Optional
items: 0 ~ 15 (Effective only in Auto, AAE, Bright
mode)
Backlight: Set the backlight compensation,
Optional items: On, Off (Effective only in Auto
mode )
DRC: DRC strength, Optional items: 0 ~ 8.
30
Bright: Intensity control, Optional items: 00~17.
COLOR
(Effective only in Bright mode)
WB Mode
Auto
Anti-Flicker Flicker: Anti-flicker. Optional
RG Tuning
0
items: Off, 50Hz, 60Hz (Effective only in Auto,
BG Tuning
0
Bright mode)
Saturation
100%
Iris: Aperture value. Optional items: F1.8,
Hue
7
F2.0,F2.4,F2.8,F3.4,F4.0,F4.8,F5.6,F6.8,F8.0,F9.6,F11.0,
IR Filter
3
Close(Effective only in Manual, AAE mode)
AWB sens
Low
Style
Style1
Shutt: Shutter value. Optional items: 1/30,1/60,
1/90,1/100,1/125,1/180,1/250,1/350,1/500,1/725,1/1000,1
/1500,1/2000,1/3000,1/4000,1/6000,1/10000
(Effective
Select Item
only in Manual, SAE mode)
Change Value
[Menu] Back
3. COLOR
Move the cursor to the Color item in the main menu
and press [home] button, COLOR menu appears, as
shown in the following figure.
WB-Mode: White balance mode. Optional
items: Auto, Indoor, Outdoor, One Push (ok),Manual
RG: Red gain. Optional items: 0~255(Effective only
in Manual mode)
BG: Blue gain. Optional items: 0~255
(Effective only in Manual mode)
RG Tuning: Red gain fine-tuning, Optional
items: -10~10(Effective only in Auto, Indoor,
Outdoor mode)
BG Tuning: Blue gain fine-tuning, Optional
items: -10~10(Effective only in Auto, Indoor,
Outdoor mode)
Sat.: Saturation. Optional items: 60% ~ 200%.
Hue: Chroma adjustment, Optional items:0 ~
14
IR Filter: IR Filter, Optional items:1 ~ 3
31
AWB sens: The white balance sensitivity,
Flip-V: Image Flip Vertical. Optional items: On,Off
Optional items: Normal, High, Low.
B&W-Mode: Image color. Optional items: On,
Style: Optional items: Style1, Style2, Style3.
Off
Gamma: Optional items: Default,0.45,0.5,0.56,
0.63
4. IMAGE
Move the cursor to the Image item in the main menu
and press [home] button, IMAGE menu appears, as
5. P/T/Z
shown in the following figure.
P/T/Z
IMAGE
SpeedByZoom On
Luminance
6
AF-Zone
Center
Contrast
8
AF-Sense
Low
Sharpness
1
Flip-H
Off
Flip-V
Off
B&W-Mode
Off
Gamma
Default
Select Item
Select Item
Change Value
[Menu] Back
Change Value
[Menu] Back
SpeedByZoom: The depth of field scale switch,
Luminance: Brightness adjustment. Optional items:
0 ~ 14
Optional items: On, Off
AF-Zone: Interested in focusing area, Optional items:
Contrast: Contrast adjustment. Optional items: 0 ~
14
Top, Center, Bottom
AF-Sense: Automatic focusing sensitivity
Sharpness: Sharpness adjustment. Optional items:
options, Optional items: Low, Normal, High
Auto,0 ~ 15
Flip-H: Image flipped horizontally. Optional
6. NOISE REDUCTION
items: On, Off
Move the cursor to the Noise Reduction item in the
32
main
menu
and
press
[home]
button,
NOISE
SETUP
REDUCTION menu appears, as shown in the
Language
EN
following figure.
Protocol
VISCA
NOISE REDUCTION
V_Address
1
NR2D-Level 3
V_AddrFix
Off
NR3D-Level 3
Net Mode
Serial
D-HotPixel
Baudrate
9600
Off
Select Item
Change Value
[Menu] Back
Select Item
Language: menu language, Optional items: EN,
Change Value
Chinese
[Menu] Back
Protocol: Control protocol type. Optional items:
NR2D-Level: 2D noise reduction. Optional
items:
AUTO, VISCA, PELCO-D, PELCO-P
Off, Auto, 1 ~ 5
V_Address: Protocol address, To be decided
NR3D-Level: 3D noise reduction. Optional
items:
according to the agreement, AUTO, VISCA protocol
Off, 1 ~ 8
Optional items: 1 ~ 7
D-HotPixel: Dynamic bad points, Optional
P_D_Address: PELCO-D protocol Optional
items: Off, 1 ~ 5
items: 0 ~ 254
7. SETUP
P_P_Address: PELCO-P protocol Optional
Move the cursor to the Setup item in the main menu
and press [home] button, SETUP menu
items: 0 ~ 31
V_AddrFix: If I can change through the serial port of
appears, as shown in the following figure.
infrared switch, Optional items: On, Off(When set to On,
useless in 88 30 01 FF Command)
Net Mode: Set the serial port control networking,
Optional items: Serial, Paral
33
Baudrate: Serial port baud rate. Optional items: 2400,
4800, 9600
parameter restore default, Include IR Remote address and
VISICA Address
Save: Save Options. Optional items: Yes, No
8. RESTORE DEFAULT
Move the cursor to the Restore Default item in the
main menu and press [home] button, RESTORE
DEFAULT menu appears, as shown in the following
figure.
RESTORE DEFAULT
Restore?
No
Change Value
[Home] OK
[Menu] Back
Restore: Confirm restore factory settings. Optional
items: Yes, No
Note: Press [HOME] button to confirm, All
34
Equipment Setup and internet connection
1.
Operating Environment
Operating System: Windows 2000/2003/XP/vista/7
Network Protocol: TCP/IP
Client PC: P4/128MRAM/40GHD/ support scaled graphics card, support DirectX8.0 or more advanced version.
2.
Equipment Installation
1) Connect internet camera to your internet or to your PC directly via internet cable.
2) Turn on DC12V power.
3) The orange light of internet port lit on, green light flashing, and the physical connection finished.
3.
Internet Connection
Connection ways between internet camera and computer, as picture 1.1 and picture 1.2 shown:
Picture 1.1 connect by internet cable
35
Picture 1.2 Connect by router /interchanger
IP camera visited/ controlled by LAN
1
Setup IP address
1.1 Connect IP Camera to internet (or PC), then turn on the power on IP Camera, shown as above. IP address can
be searched via update software(software upgrading tool,named upgrade_En.exe in small CD in package). shown as below:
Run upgrade_En.exe (UPGRADE v1.8) by CD-Rom, click [Search].The software will show the current LAN camera's
IP address, subnet mask number, network gateway number and camera MAC serial number etc, shown as below:
If IPC IP address and PC IP address not in the same internet segment, upgrade_En.exe can modify IP address, subnet
mask and port number etc. accordingly.
In UPGRADE v1.8, select the camera needed to be modified, shown as below:
36
Click “config” then go to below:
37
Enter new IP in "IP" bar, subnet mask in "Mask" bar, Gateway,First DNS, MAC address,and click “Set”. Shown as
above.(For example: if your PC IP is 192.168.1.88, then camera IP must be 192.168.1.xx, the first, second, third number
must keep the same)
NOTE!
IP camera default IP address"192.168.100.88", user "admin", password "admin".
2
Visit/Access IP Camera
2.1 Input http://192.168.100.88 to IE ( better with IE web browser, others will cause little latency),a login
window pop up, input login name: admin, password: admin, shown as below:
38
2.2 Input login name and password, click "confirm", then pop up below window,language select button on the left bottom:
39
NOTE!
If user first time use this camera by internet (only for new user), must install a player software (VLC). Please go to
http://4dx.pc6.com/xy/vlcplayer.zip,pop out the download window, click“Save”. Then Install VLC (player software),
After installation,login again,will show as above:
IP Camera accessed/controlled by WAN (internet)
1.
Setup IPC accessed/controlled by dynamic DNS
2 dynamic DNS available:
Dyndns.org,
3322.org
1.1 Router Port Mapping:
Take TP-LINK router for example,enter Router Home Page (interface page),select “Transit control”- “ Transit
rule"--"Virtual server"-- “Virtual service” ,add a new port number in “Outside Port” ,add a new port number in
“inside port”, put camera IP address to “IP address”,then select “Apply” and “Add”,shown as below: (sorry,we do
not have English Version TP-Link here,so put the Chinese Version picture for reference,the position is the same)
40
2.
Dynamic DNS visit camera
1.1 Camera accessed by dynamic DNS
Set domain name to camera, setup the parameter, then dynamic DNS can access camera.
Access link:http://hostname :port number
For example, setup host computer name: youdomain.f3322.org, camera port number: 554,
Access link should be: http://youdomain.3322.org:554
NOTE!
If camera port default as 80,then unnecessary to input port number, use host name can access camera directly .
VLC stream media player monitoring
1.
Visit VLC media server procedure
1.1 Open VLC media player, click "Media"
"Open Network Steam", or click "Ctrl+N"; as below:
41
1.2 Input URL address: rtsp://ip: port number/1 (Main stream); rtsp://ip: port number/2(sub stream)(When RTSP port
number default value is 554,then can be omitted as rtsp://ip/1 or rtsp://ip/2)
42
IP Camera parameter setup
1
Homepage introduction
1.1 Menu
All pages include 2 menu bars:
Real time monitoring: displaying video image
Parameter setup: with function buttons
1.2 Video viewing window
Video viewing window must be same as video resolution, the bigger the resolution is, the bigger the playing area is.
Double click viewing window, will show full-screen, double click again, will return to initialized size.
Status bar in viewing window shown as below
1) Video playback pause button: control real-time video pause, stop the last picture, click recoverable video again.
2) Audio control buttons: can set slient mode.
3)Full screen switch button.
1.3 PTZ Setup
43
1) PTZ direction control box: Up, down, left, right, home oblique button as above
2) Rate: Vertical speed can be chosen as 1 ~ 24, horizontal direction at the rate of 1 ~ 20.
select corresponding speed and click direction button to realize PTZ speed up or speed down.
3) Zoom In/Zoom out: for zooming in or zooming out, Focus In/ Focus Out: Focusing on distant
objects or Focusing on close objects.
4) Set/Call: When PTZ turn to expected position, can set up a number of preset that user want. click "Set"
button,when PTZ turn to other position, click "Call" button,PTZ turn back to preset position.
1.4 Language selection
Chinese/English
44
1
Media
1.1 Video Setup,please click "Video"
1)
Video format
Support 50HZ(PAL)and 60HZ(NTSC),and Dial priority three formats.
2)
Video Coding
Support baseline and mainprofile format
3)
Resolution
45
Main bit flow support 1920x1080,1280x720,minor bit flow support 640x360,320x180,the bigger resolution is, the
clearer the image will be, more network bandwidth will be taken.
4)
Bit Rate
User can assign bit flow/stream, normally speaking, the bigger bit flow is, the clearer the image will be. The bit
allocation must combine with network bandwidth, when the network bandwidth is too narrow and the allocated bit
flow is too big, will cause video signal flow not to be transmitted normally, the video effect will be worse.
5)
Maximum frame rate:
User can specify the size of the frame rate, generally, the frame rate greater, the image more smooth; Frame rate is
smaller, the more sense of beating.
6)
Bit Rate:
Code stream control way:
Constant bit rate: video coder will be coding according to preset speed
Variable bit rate: video coder will adjust the speed based on preset speed to gain the best image quality.
7)
I key frame interval:
Set interval between 2 I frame, the bigger interval is, the response will be lower from viewing window.
8)
Fluctuate level
Restrain the fluctuation magnitude of variable rate, grade 1 ~ 6
2
Image Setup,please click “Image”
46
1)
Brightness
Image bright 0~100, slider control, on the right shows the corresponding numerical. Default 43.
2)
Saturation
Saturation 0~100, slider control, on the right shows the corresponding numerical. Default 50.
3)
Contrast
Contrast0~100, slider control, on the right shows the corresponding numerical. Default 57.
4)
Sharpness
Sharpness0~100, slider control, on the right shows the corresponding numerical. Default 16.
5)
Hue
Hue 0~100, slider control, on the right shows the corresponding numerical. Default 50.
6)
Distortion
47
Adjusted the wide-angle lens image distortion occurs, controllable range 0 ~ 100, right shows the corresponding
numerical. Default 0.
7)
Flip & Mirror
Tick Flip to realize image upside down, tick mirror to realize image around the mirror. Default not tick.
8)
Button
Adjusting the parameters, press "apply" button to save, press "cancel" button to cancel the adjustment of the
parameters, press "default" button obtain the default value.
3
Audio Setup,please click “Audio”
1)
Audio Type
Audio type AAC
2)
Sample rate
Sample rate 44.1 K and 48 K,selectable.
3)
Bit rate
Bit rate 96k,128k,256k,selectable
4)
Input Type
line in only
48
5)
Input VolL
The volume of the left channel
6)
Input VolR
The volume of the right channel
7)
Button
Press "apply" button to save parameters, press "cancel" button to cancel parameter
4
System Setting,please click “System”
1)
Work Mode
Work Mode RTSP
2)
Reboot
Click the "Reboot" button, system restart.
3)
User and password
The user can modify the password (letters and Numbers only)
4)
Apply / Cancel
Modify password and click the "apply" button to the login page, press "cancel" button to cancel
password change.
5
Network Setting,please click “Network”
49
1)
Lan Settings Default the IP address is 192.168.100.88, The MAC address can be modified.
2)
Port Settings IP address identifies the network device, the device can run multiple web applications, each network
program using network port to transmit data, so data transmission to be carried out between the port and port. Port
setting is to set up WEB SERVER program using which port to transmit. When port mapping, need to be
consistent with the port number(default port: 80)
3)
RTSP Port 50
Network camera support RTSP protocol, use the VLC tools broadcast.
4)
TCP Port Support TCP protocol,
5)
default port: 5678.
Apply / Cancel Modify network parameters then press "Apply" button to modify network parameters, press "Cancel"
button to cancel network parameters.
6
Device Information,please click “information”
Show the current device information, as shown below.
51
Network Control
1.
View from Web browser (better in IE)
l
To view from web browser, firstly need to check camera IP address. There are 2 methods to check:
Method 1: press * and # and 4 on remote controller one by one, the camera IP address will be shown on
screen.
Method 2: connect camera to PC with ethernet cable, use “upgrade_En.exe” to search for IP address
l
Please enter the IP address, username, password to web browser you have got via the above methods, then enter
network control/viewing.
2.
Change IP address,2 methods as below:
Method 1: On web control page, find “Network”--->Change IP---->Click “Apply”----> Restart camera
52
Method 2: Open “upgrade_En.exe”, change IP and click “Set”
53
3.
Once IP changed, need to restart the camera. 2 methods to restart as below:
Method 1: Turn off and turn on manually to restart camera
Method 2: On web page, find “System” and click “Apply” (when under remote controlling environment, better use
this method)
54
PTZ ON IP NETWORK
This model currently supports various PTZ control methods, including RS232, RS485, IR remote control, HTTP
CGI, and TCP protocol.
The following is the detailed description about HTTP CGI and TCP Protocol control methods.
1. TCP Protocol Method
V51N implements TCP server inside, there is a port configurated by Web for receiving the connection from
TCP client,the TCP port number is 5678. Once connection between client and server set up, the client will send PTZ
command to server,the server then parse and execute PTZ command.
PTZ command format is based on VISCA Protocol to define, details as below:
Command
Zoom
Focus
Pan & tilt
Function
Command Packet
Stop
81 01 04 07 00 FF
Tele(Standard)
81 01 04 07 02 FF
Wide(Standard)
81 01 04 07 03 FF
Tele(Variable)
81 01 04 07 2P FF
Wide(Variable)
81 01 04 07 3P FF
Stop
81 01 04 08 00 FF
Far(Standard)
81 01 04 08 02 FF
Near(Standard)
81 01 04 08 03 FF
Far(Variable)
81 01 04 08 2P FF
Near(Variable)
81 01 04 08 3P FF
Auto Focus
81 01 04 38 02 FF
Manual Focus
81 01 04 38 03 FF
Auto/Manual
81 01 04 38 10 FF
Up
81 01 06 01 VV WW 03 01 FF
Down
81 01 06 01 VV WW 03 02 FF
Left
81 01 06 01 VV WW 01 03 FF
Right
81 01 06 01 VV WW 02 03 FF
UpLeft
81 01 06 01 VV WW 01 01 FF
UpRight
81 01 06 01 VV WW 02 01 FF
DownLeft
81 01 06 01 VV WW 01 02 FF
55
Comments
P = 0(low speed) - 7(high speed)
P = 0(low speed) - 7(high speed)
AF On/Off
VV: Pan speed 0x01 (low speed) to 0x18
(high speed)
WW: Tilt speed 0x01 (low speed) to 0x14
(high speed)
Preset position
DownRight
81 01 06 01 VV WW 02 02 FF
Stop
81 01 06 01 VV WW 03 03 FF
Home
81 01 06 04 FF
Reset
81 01 04 3F 00 PP FF
Set
81 01 04 3F 01 PP FF
Recall
81 01 04 3F 02 PP FF
PP:
Position
0x64-0xFE)
2. HTTP CGI Method
This model integrated with web server inside, support CGI related with PTZ.
2.1 Pan and Tilt
control URL format as below:
http://[Camera IP]/cgi-bin/ptzctrl.cgi?ptzcmd&[action]&[pan speed]&[tilt speed]
More descriptions:
[Camera IP]: This camera IP address;
[action] including:up, down, left, right, ptzstop;
[pan speed] : 1(low speed) – 24(high speed);
[tilt speed]: 1(low speed) – 20(high speed).
2.2 Zoom control URLformat as below:
http://[Camera IP]/cgi-bin/ptzctrl. cgi?ptzcmd&[action]&[zoom speed]
More descriptions:
[Camera IP]: This camera IP address;
[action] including: zoomin, zoomout, zoomstop;
[zoom speed]:
0(low speed) – 7(high speed).
2.3 Focus control URLformat as below:
http://[Camera IP]/cgi-bin/ptzctrl.cgi?ptzcmd&[action]&[focus speed]
More descriptions:
[Camera IP]: This camera IP address;
[action] including: focusin, focusout, focusstop;
[focus speed]: 0(low speed) – 7(high speed)
2.4 Preset Position control URL format as below:
56
Number(==0x00-0x59,
http://[Camera IP]/cgi-bin/ptzctrl.cgi?ptzcmd&[action]&[position number]
More descriptions:
[Camera IP]: This camera IP address;
[action] including: posset, poscall;
[position number]: 0-89,100-254.
USB Control
Connect USB cable from camera to computer (must with USB3.0 port)
Install the software in the small CD in the package (amcap.exe)
57
,and click to open.
Maintenance and Troubleshooting
Camera Maintains
l
If camera will not be used for a long time, please turn off the power switch, disconnect AC power cord of AC
adaptor to the outlet.
l
Use soft cloth or tissue to clean the camera cover.
l
Please use the soft dry cloth to clean the lens. If the camera is very dirty, clean it with diluted neuter detergent. Do
not use any type of solvents, which may damages the surface.
Unqualified Application
l
No shooting extreme bright object for a long period of time, such as sunlight, light sources, etc.
l
No operating in unstable lighting conditions, otherwise image will be flickering.
l
No operating close to powerful electromagnetic radiation, such as TV or radio transmitters, etc.
Troubleshooting
Image
l
No image
1. Check whether the power cord is connected, voltage is OK, POWER lamp is light.
2. Check whether the camera can self-test after startup.
3. Check the BOTTOM switch and make sure the two switches are both set OFF.
4. Check video cable is connected correctly.
l
Abnormal display of image
Check video cable is connected correctly.
l
Image dithering even at widest zoom position
1. Check whether camera is fixed correctly.
2. Make sure if there are something like vibration machine or other things nearby.
Control
l
IR remote controller cannot control the camera
1. Change the battery
2. Check the camera working mode.
58
3. Check IR address of the Remote Commander is set correctly.
l
Serial communication cannot control the camera
1. Check the camera working mode.
2. Check control cable is connected correctly.
Copyright Notice
All contents of this manual, whose copyright belongs to our Company. Cannot be cloned, copied or translated
without the permission of the company. Product specifications and information which were referred to in this document are
for reference only, and the content will be updated at any time without prior notice.
2014/9
59