7100 epa WOOD FIRepLaCe - Hearth & Home Technologies

7 1 0 0 e p a W O O D F I R EP L A C E
PE R F O R M A N C E
Cover: 7100 shown with rolling meadows front and satin nickel front
and door trim
Above: 7100 shown with mission hill front and satin nickel door trim
Powerful and Efficient
The 7100 is an energy-efficient heating powerhouse. Automatic Combustion Control provides hassle-free ignition, and the Quadra-Fire
Four Point Burn System helps achieve long, clean burns. This rugged fireplace is also built to last, enduring accelerated lifecycle testing—
once again proving, “Nothing Burns Like A Quad.”
The Quadra-Fire 7100 is the cleanest burning, easiest to operate and most durable EPA wood-burning fireplace available. And of course,
performance comes standard.
Automatic Combustion Control and the Four-Point Burn System are integral technologies in the 7100.
Automatic combustion control
Four-point burn system
Automatic Combustion Control (ACC) is an advanced heatmanagement technology from Quadra-Fire. ACC feeds the fire
with air when it's needed most—for precision start-up and
consistent, extended burns.
The patented Quadra-Fire Four-Point Burn System produces
intense rolling flames. Four combustion cycles extend the
heat, enhance the fire and increase efficiency for durable, longlasting performance.
To learn more visit quadrafire.com.
To learn more visit quadrafire.com.
7100 EPA WOOD FIREPLACE
FEATURES
•76,390 BTUs — heats 1,200 to 3,000 square feet, based on climate and home efficiency
•3.4 cu. ft. interior capacity / 24" maximum log length
•Up to 16 hours of burn time from each load of wood
7100 shown with valley forge front and satin nickel door trim
•EPA Phase-II certified, with emission levels of 3.1 g/hr
Options
•Decorative firescreen
•Black, Satin Nickel or Gold trim
•Valley Forge, Mission Hill, or Rolling Meadows front styles
•Heat Zone® kits to distribute heat to additional rooms
Optional decorative firescreen
Door trim options
Three durable fronts fit many
home styles and décors
Valley Forge - The Valley Forge
has a textured surface and
is trimmed in 1/2" and 5/8"
twisted iron bar stock.
Shown left with satin nickel
door trim.
Valley Forge front detail
Mission Hill - The Mission Hill
has a smooth surface with
coined and layered strap iron
and raised corner details.
Shown left with satin nickel
door trim.
Mission Hill front detail
Rolling Meadows - The Rolling
Meadows has a flat steel
surface with raised edging in all
black, or with satin nickel trim.
Shown left with satin nickel
front and door trim.
Rolling Meadows front detail shown with satin nickel trim
Heat routed
through air ducts
to other areas of
the home
REMOTE ZONE HEATING CAPABILITIES
The 7100 can also supplement your home heating with two
optional Heat Zone systems. These systems allow you to route
heated air to other areas of the home.
7100 Specifications
Technical Data
Peak BTU/Hour
Output
7100
Burn Time
76,390C
13-3/16"
[335]
Maximum
Wood Length
up
to 16 hours
23-7/16"
24"
[595]
L
Front
Shipping
Weight
670 lbs
13-3/16"
[335]
Blower System
C
L
280 cfm
Emissions
(g/hr)
Efficiency
1,200 3,000 sq. ft.
3.1 EPA
certified
up to 77%
23-7/16"
[595]
Top
3-1/2"
[89]
Heating Capacity*
Right Side
3-1/2"
[89]
1"
[25]
1"
[25]
42-5/16"
[1075]
13-3/16"
[335]
32-1/2"
[826]
45-13/16"
[1148]
9-7/16"
[240]
40"
[1016]
43"
[1092]
Blower Electric Access
(right side of fireplace)
45-13/16"
[1148]
2" [51]
12" [305]
Position combustible/
non-combustible mantel
60" [1524] from base of
fireplace
46-1/4"
[1175]
24"
[610]
The finished cabity depth must
be no less than 24" [610]
from the finished backwall to
the outside of front wall framing
13-3/4"
[349]
4-5/16"
[109]
42-5/16"
[1075]
Framing Dimensions & Clearances
42-1/4"
[1073]
23-7/16"
[595]
32-1/2"
[826]
45-13/16"
[1148]
10-13/16"
[259]
6"
[152]
38"
[965]
C42-5/16"
L [1075]
3-1/2"
[89]
10-13/16"
[259]
6"
[152]
38"
[965]
1"
[25]
40"
[1016]
9-7/16"
[240]
13-3/4"
[349]
43"
[1092]
4-5/16"
[109]
Blower Electric Access
(right side of fireplace)
32-1/2"
[826]
ENCLOSED AREA:
Appliance to back wall....................1/2"
38"
[965]
Appliance to sidewall.........................
1"
40"
[1016]
Duct boots to framing........................
0"
43"
[1092]
Top standoffs to header...................... 0"
10-13/16"
MANTEL:
[259]
Minimum
mantel
height
(from base)..........60"
4-5/16"
9-7/16"
[109]
[240]
Maximum
mantel depth..............................12"
13-3/4"
6"
[152]
[349]
Blower Electric Access
(right side of fireplace)
MIN. FLOOR PROTECTION:
20" deep by 41" wide, centered in front of fireplace
EXPOSED SURFACES:
Faceplate to sidewall........................ 16"
Heat zone air grilles to ceiling......... 12"
48-1/4"
[1226]
*See your local Quadra-Fire dealer for help in determining the product that best suits your heating needs based on climate and home efficiency. BTUs will vary depending on the type of fuel used.
Phone: 800-927-4356
Web: www.quadrafire.com
Available From:
facebook.com/QuadraFire
twitter.com/QuadraFire
youtube.com/QuadraFirePower
Limited Lifetime Warranty**
The strongest in the industry, Quadra-Fire provides a limited lifetime warranty on
the most important aspects: firebox and heat exchanger.
** For full warranty details go to www.quadrafire.com
IMPORTANT - READ BEFORE YOU INSTALL!
Refer to the Owner/Installation Manual for complete clearance requirements and specifications. The
images and descriptions in this brochure are provided to assist you in product selection only.
Quadra-Fire is a registered trademark of Hearth & Home Technologies. Product specifications and pricing
subject to change without notice.
Fireplace, stove and insert surfaces get extremely HOT and can cause severe burns if touched. Keep a safe
distance away. To learn more visit www.quadrafire.com/fireplacesafety.
QDF-1017U-1214