DREMEL MULTI PRO® TOOLS
VARIABLE SPEED MULTI PRO® TOOL
This is the top of the line tool that has an adjustable, high speed ball
bearing motor that runs between 5,000 and 30,000 RPM. Tool is
double insulated with a motor specification of 120V, 50-60 Hz., AC
and 1.15 Amps. Unit comes complete with a 6 ft. two-wire power
cord not requiring an adapter plug, a 1/8” collet, and A-7 Drum
Sander with 6 ea. A-8 Sanding Bands, as well as 4 other Dremel
accessories. Tool is 8” long and weighs 1 lb.
No. D-395 - Variable Speed Moto-Tool. Each
SINGLE SPEED MULTI PRO® TOOL
This constant speed, 28,000 RPM, tool is double insulated to
eliminate the need for grounding. Permanently lubricated bronze
sleeve bearing motor gives 30% more power than previous Dremel
tools. Motor is 120V., 50-60 Hz., AC, 1.15 Amps. Unit comes
complete with a 6 ft. two-wire power cord not requiring an adapter
plug, a 1/8” collet, an A-7 Drum Sander with 6 ea. A-8 Sanding
Bands, as well as 4 other Dremel accessories. Tool is 8” long and
weighs 1 lb.
No. D-275 - Single Speed Moto-Tool. Each
MINIMITE® CORDLESS TOOL
Precision cordless rotary tool. Comes complete with removable battery
pack, charger and 5 bits. 2 speeds, 5000 and 10,000 R. P. M. Excellent
for voicing piano hammers when a needle is used as a bit. Cannot be
used with No. 224 Drum Sander Guide.
D-750 - Dremel Minimite. Each
VARIABLE SPEED MULTI PRO®
KIT WITH FLEX SHAFT
This is the ultimate kit in the Dremel
line that incorporates the regular Moto-Tool together
with the 36” long, flex-shaft cable attachment. The
variable speed model D-395 tool, as described on the preceding page, is included with the A-7 Drum Sander, various sanding bands
and 30 accessory bits. A large carrying case to handle the Moto-Tool, flex-shaft cable and a separate accessory tray to accommodate
92 bits is included.
No. D-3956 - Deluxe Moto-Tool Kit. Each
DREMEL TOOLS AND ACCESSORIES (NOT SHOWN)
Brochures of the complete line of Dremel tools and accessories are available upon request. Schaff regularly stocks many additional
Dremel accessories, which may be ordered by using the Dremel part number for reference.
78
DREMEL TOOLS
ADAPTER FOR DREMEL MOTO-TOOL
This 1” long plastic head piece adapter
will screw on to the new style Moto-Tools
so that our No. 224 Drum Sander Guide
can be used.
No. 224A - Adapter for Moto-Tool. Each
VERSATIP MULTI-PURPOSE TOOL KIT
Multi-purpose tool for wood burning, soldering, hot knife
cutting of Styrofoam and plastic, cutting and fusing rope.
5 different tips are easily changed to provide maximum
versatility. 30 Watt knife.
No. D-1550 - VersaTip Multi-Purpose Tool. Each
DRUM SANDER
This Moto-Tool accessory is
designed to be used with our No.
224 Drum Sander Guide to file and
clean up piano hammers. The drum
is 1/2” diameter.
No. A-7 - Drum Sander. Each
SANDING BANDS
Replacement abrasive sanding bands for
No. A-7 Drum Sander. 1/2” diameter.
No. A-8 - Sanding Bands. Each
ELECTRIC ENGRAVER
The perfect tool for protecting your tool investment will
permanently mark or engrave on metal, plastic, glass,
ceramics, wood or leather. A stroke adjustment regulates the
engraving depth from fine lines to deep grooves. The 115 volt
tool, measuring 6” long, weighing 8 oz. includes a
replaceable carbide steel point.
No. D-290 - Electric Engraver. Each
DRUM SANDER GUIDE
Our 2” long aluminum guide for making a controlled,
square cut over the piano hammer’s surface, can be used
with any style Dremel tool. The guide has three stations, one
each for light, medium and deeper cuts. The newer model
Moto-Tools shown now have a flared head piece, which
must be removed to be able to attach the Drum Sander
Guide. We include our No. 224A Plastic Head Adapter to
make the conversion.
No. 224 - Drum Sander Guide. Each
CONTOUR SANDER
The Dremel Contour Sander is a compact, lightweight
sanding tool that provides ultra smooth results on a variety of
surfaces. Ideal for hard to reach areas especially found in
pianos. Variable speed settings (4,000-10,000 strokes per
minute). Unit is furnished with a variety of sanding contours,
sanding tubes and sandpaper grits.
No. D-6000 - Dremel Contour Sander. Each
79