ISM 824 - Extron Electronics

Matrix Switchers
ISM 824
➤ Eight input matrix switcher with
optional integrated signal processing
Modular Integration
Scaling MultiSwitcher
➤ Two universal pass-through wideband
outputs and four customizable output
slots - Eight outputs total
Optimum integration flexibility in
a single, compact enclosure
➤ Eight optional output boards
- Universal RGB & Video scalers:
- Analog output
- DVI output
- HD-SDI output
- Video scaler
- Scan converter
- MTP twisted pair
- Single output wideband
- Dual output wideband
➤ Audio input gain and attenuation
➤ Audio output volume control
➤ IP Link® Ethernet control and
monitoring
FPO
www.extron.com
I n t e g r at i o n s c a l i n g m u lt i s w i t c h e r
Introduction
The ISM 824 MultiSwitcher is a unique modular matrix
switcher that allows for simultaneous scaling and wideband
• HD-SDI - outputs one of five standard serial digital rates,
including 720p 50/60, 1080i 50/60, and 1080p/24.
switching in a single, compact enclosure. It features two
standard, wideband outputs and four customizable board
For applications that require video-only scaling with RGB pass-
slots that accept a variety of optional output boards, including
through, the Video Scaler Output Board scales standard
video scaling and additional wideband outputs. The
definition composite video and S-video signals to a common,
ISM 824 is ideal for applications such as
high resolution output rate. It offers 30 selectable output rates
boardrooms, large classrooms, and
from 640x480 to 1400x1050, including HDTV 1080p.
auditoriums that require costeffective signal routing with
For compatibility with low resolution video monitors as well
flexible, on-board signal
as VCRs, DVD recorders, or videoconferencing, the Scan
processing.
Converter Output Board delivers an optimized, scanconverted video output.
The ISM 824 is similar in
performance and features to
For applications requiring signal distribution without signal
Extron's popular CrossPoint Series.
processing, the MTP Twisted Pair Universal Transmitter
The ISM 824 offers eight inputs that are fully
Board transmits video, audio, and control signals up to 600
configurable from RGBHV and HDTV to composite video, and two
feet (185 meters) on a single CAT 5/5e/6 or Skew-free UTP
universal, pass-through wideband outputs.
cable. Also, as a universal transmitter, it supports all input
signal types in mixed-signal routing applications. Finally,
In addition to the two standard wideband outputs, the
Single and Dual Output Wideband Boards are available for
ISM 824 features a plug-in backplane design with four
additional, configurable wideband outputs.
output slots that support optional expansion boards for signal
processing, such as scaling and scan conversion, as well
The ISM 824 provides optimum integration flexibility
as additional wideband outputs. With this unique, powerful
while reducing system complexity and cost. With both
expansion capability, the ISM 824 can be equipped initially
matrix
with any of the output boards for a specific project, and then
in one 3U enclosure, system configuration and set-
upgraded in the future with additional boards as system needs
up can be accomplished from a single location, saving
evolve and expand.
installation cost and time. At the same time, control system
switching
and
signal
processing
capabilities
design and programming is simplified. Additionally, the
Eight output expansion boards are available for the
ISM 824 is ideal for locations where equipment rack space
ISM 824, with the same advanced video processing
is at a premium.
technologies employed in Extron scalers, signal processors,
and scan converters. The Universal RGB & Video Scaler
All features and functions of the ISM 824, including those of
Output Board features high performance RGB and video
any installed output boards, are fully accessible from the front
scaling, with upconversion and downconversion of high
panel, as well as through the RS-232 and IP Link ports. The
resolution RGB signals, as well as standard definition video
ISM 824 thus offers versatile control functionality for
signals. The Universal RGB & Video Scaler Board is available
managing all source distribution and signal processing within
in three versions:
an A/V system.
• Analog - outputs RGBHV or component video in 70
The ISM 824 provides exceptional performance in the most
selectable rates at up to WUXGA (1920x1200) resolution,
demanding, very high resolution computer-video and audio
as well as HDTV 1080p.
routing systems, with features such as ADSP™ - Advanced
• DVI - outputs 61 selectable rates up to 1920x1200 and
HDTV 1080p.
Digital Sync Processing, DSVP™ - Digital Sync Validation
Processing, and audio output volume control.
I n t e g r at i o n s c a l i n g m u lt i s w i t c h e r
Overview
Back-lit input/output selection buttons
Configuration port
User-friendly interface
I/O selection and crosspoint ties are easily
identifiable using back-lit buttons with clear overlay
labels, enabling simple front panel operation.
The ISM 824 can be conveniently set up
and configured after installation, using the
front panel serial configuration port.
An intuitive menu-driven LCD interface, direct
access buttons, and precise rotary controls
enable detailed adjustment of image settings.
ISM 824 Front
IP Link Ethernet control enables full
operation and configuration from any
authorized Web client.
Fully configurable inputs
Two Wideband Outputs - Standard
The ISM 824 features eight fully configurable
inputs that accommodate a wide range of
sources, including RGB, HDTV, component
video, S-video, and composite video.
The ISM 824 includes two, universal
pass-through wideband outputs.
Four customizable board slots 2 Dual output, 2 Single output
A simple, plug-in backplane design accepts
a variety of optional signal processing and
wideband output boards, reducing installation
and integration labor costs.
ISM 824 Back
Audio input gain and attenuation
Audio output volume control
Optional output boards
Each audio input includes independent
gain and attenuation, which eliminates
noticeable volume differences when
switching between signal sources.
Adjustable output volume, per output,
eliminates the need for audio preamps in
many system designs.
Eight available output boards, including universal
scalers, video scaler, scan converter, MTP twisted
pair, and single and dual output wideband boards,
provide a flexible upgrade path for future signal
processing and distribution needs.
I n t e g r at i o n s c a l i n g m u lt i s w i t c h e r
Features
Windows Control Software
1365 x 768
Plasma Display
The included Windows control software enables
complete set-up and real-time operation of the
ISM 824. The software provides complete control
functionality and full configuration capability.
SXGA+
1400 x 1050
Projector
NTSC or PAL
Monitor
RGBHV
Fully Configurable Inputs
Component
Video
RGBHV
2
3
4
INPUTS
5
6
7
LAN
ACT LINK
1
R/R-Y
R/R-Y
G/Y
VID
G/Y
VID
B/C
B-Y
B/C
B-Y
2
OUTPUT
3/5
R/
R-Y
C
R/
R-Y
R/
R-Y
G/Y
G/Y
G/Y
B/
B-Y
RS232/RS422
REMOTE
OUTPUTS
8
RGB/R-Y,Y,B-Y
/YC/VID
1
Anaheim, CA
RESET
H/HV
H/HV
V
V
OUTPUT
4/6
INPUTS
1
2
3
4
RGB/R-Y,Y,B-Y
/YC/VID
The ISM 824 features eight fully configurable
inputs on BNC connectors that accommodate
RGBHV, RGBS, RGsB, component video, S-video,
or composite video signals. High resolution
sources can include computer-video signals up to
WUXGA (1920x1200), and HDTV up to 1080p.
H/
HV
V
Y
B/
B-Y
VID
V
GENLOCK IN
H/
HV
V
OUTPUTS
5
6
7
8
1
2
Scan Converter
Video Scaler
Universal RGB and Video Scaler
Four Customizable Output Slots
In addition to the two universal wideband outputs,
the ISM 824 is designed for future expansion via
a simple, plug-in backplane design with four
output slots that support optional output boards
for video and RGB scaling, scan conversion, and
additional wideband outputs. The first two slots
support dual or single output boards.
B/
B-Y
RGBHV
Component
Video
RGBHV
Component
Video
GSS 100
Up to Eight Input Sources
Up to 4 outputs can be individually scaled or scan converted to suit the requirements of virtually any presentation system.
Audio Inputs and Outputs
Every input and output of the ISM 824 includes
connectivity for balanced or unbalanced mono
or stereo audio signals, including outputs on the
optional expansion boards. Gain and attenuation
can be set for each audio input. With volume
control available for each audio output, the
ISM 824 eliminates the need for an audio
preamplifier in many system designs.
Integrator-Friendly Features
IP Link
The ISM 824 offers the same integratorfriendly features familiar to users of the Extron
CrossPoint 450 Plus Series of matrix switchers,
including QS-FPC™ - QuickSwitch Front Panel
Controller with tri-color backlit buttons, and 20
global presets for saving I/O configurations.
IP Link is a high performance intelligent network
integration solution developed by Extron.
Ethernet-enabled A/V products, such as the
ISM 824, can be managed and supported by a
technician or administrator at any time from any
authorized Web client.
Selectable Output Resolutions
IP Link enables remote access to all functions
and status parameters, including the internal
operating temperature, and the horizontal and
vertical sync frequencies of any input. The
ISM 824 can be controlled through IP Link by
accessing the internal Web pages or using the
Windows control software.
The Universal RGB & Video Scaler Output Board
option for the ISM 824 is available in three
versions:
• A nalog RGB/YUV output, which offers
70 scaled output rates from 640x480 to
1920x1200, including HDTV up to 1080p
• D
VI output, which offers 61 scaled output
rates, also up to 1920x1200 and HDTV 1080p
• HD-SDI output, which offers five scaled
output rates, including 720p 50/60, 1080i
50/60, and 1080p/24
The Video Scaler Output Board offers 30 scaled
output rates from 640x480 to 1400x1050,
including HDTV up to 1080p.
When equipped with the optional Universal
Scaler, Video Scaler, or Scan Converter Output
Boards, additional integrator-friendly features
are available to expedite the set-up process and
assist in delivering optimal image quality. These
include Auto-Image™ set-up, fine tuning for
picture controls, and memory presets for saving
and recalling picture settings.
RS-232 Control
Through the RS-232 serial control port, the
ISM 824 can be controlled and configured via
the Extron Windows®-based control program,
or integrated into third-party control systems
using Extron SIS™ - Simple Instruction Set serial
commands.
I n t e g r at i o n s c a l i n g m u lt i s w i t c h e r
Output Boards
Eight optional output boards are available for the ISM 824. These cards, which include two scalers,
scan converter, twisted pair, and single and dual output wideband boards, can be used in a variety
of combinations to support a wide range of signal distribution and signal processing requirements.
The boards are installed in a simple, plug-in backplane for system expansion before, during, or
after system installation.
ISM RGB
Universal Video & RGB Scaler Board with Analog RGB/YUV Output
The ISM RGB Universal Video & RGB Scaler Board with Analog RGB/YUV Output scales virtually any input signal, including high
resolution RGBHV, HDTV, and standard definition composite video, S-video, and component video to a single, common output rate.
It outputs RGB or component video and offers 70 selectable rates from 640x480 to 1920x1200, including HDTV 1080p. Other key
features include 3:2 NTSC and 2:2 PAL pulldown detection, Auto-Image setup, comprehensive picture controls, and a built-in test
pattern generator for ease of installation and set-up.
Part # 70-544-01
ISM DVI
Universal Video & RGB Scaler Board with DVI-D Output
The ISM DVI Universal Video & RGB Scaler Board with DVI-D Output scales virtually any input signal, including high resolution RGBHV,
HDTV, and standard definition composite video, S-video, and component video to a single, common output rate. It features a singlelink DVI-D output and offers 61 selectable rates from 640x480 to 1920x1200, including HDTV 1080p. Other key features include 3:2
NTSC and 2:2 PAL pulldown detection, Auto-Image™ setup, comprehensive picture controls, and a built-in test pattern generator for
ease of installation and set-up.
Part # 70-624-01
ISM HDSDI
Universal Video & RGB Scaler Board with HD-SDI Output
The ISM HDSDI Universal Video & RGB Scaler Board with HD-SDI Output scales virtually any input signal, including high resolution
RGBHV, HDTV, and standard definition composite video, S-video, and component video to a single, common output rate. It features
a single-link HD-SDI serial digital video output and offers five selectable SMPTE and ITU-compliant video output rates, including
720p 50/60, 1080i 50/60, and 1080p 24. Other key features include 3:2 NTSC and 2:2 PAL pulldown detection, Auto-Image setup,
comprehensive picture controls, and a built-in test pattern generator for ease of installation and set-up.
Part # 70-625-01
ISM VS
Video Scaler Output Board with RGB Pass-Through
For video-only scaling needs, the ISM VS Video Scaler Output Board with RGB Pass-Through simplifies system design with mixed
signal formats by scaling standard definition composite video and S-video signals to a common, high resolution output rate. It offers
30 selectable output rates from 640x480 to 1400x1050, including HDTV 1080p. High resolution RGB signals are passed through at
their native rate. The Video Scaler Output Board also features comprehensive picture controls and a built-in test pattern generator.
Part # 70-545-01
I n t e g r at i o n s c a l i n g m u lt i s w i t c h e r
Output Boards (Cont.)
Optional Output Expansion boards for iSM 824
ISM SC
Scan Converter Output Board with Video Transcoder
The ISM SC Scan Converter Output Board with Video Transcoder converts any high resolution RGB or HDTV component video signal
to NTSC or PAL composite video, S-video, or component video. It also accepts low resolution video as pass-through signals, and
can transcode composite video, S-video, and component video input signals to match the selected scan converted output format.
Compatible with RGB signals up to 1600x1200, the Scan Converter Output Board simplifies system design for applications that require
a baseband video output for distribution to televisions and other video monitors, or recording for archival purposes.
Part # 70-546-01
ISM MTP UT 4DA
Universal MTP Twisted Pair Transmitter with 4-Output DA
The ISM MTP UT 4DA output card adds MTP Twisted Pair series transmission capability to the ISM 824. It transmits video, audio, and
control signals up to 600 feet (185 meters) on a single CAT 5/5e/6 or Skew-free UTP cable. Also, as a universal transmitter, it supports
all input signal types in mixed-signal routing applications. The ISM MTP UT 4DA accepts any video input signal type and outputs
it as four identical twisted pair signals for connection to MTP Series twisted pair receivers, including MTP U R universal receivers.
The ISM MTP UT 4DA features local RS-232 insertion ports, which eliminate the need for additional control system infrastructure to
support remote displays, while overcoming the 100-foot (30m) distance limitation for RS-232 signals. The integrated, four-output
MTP distribution amplifier simplifies system design and eliminates the cost of an outboard DA in applications where multiple remote
displays must receive the same input signal simultaneously.
Part # 70-819-01
ISM 1WB
Single Output Wideband Board with 5 BNC Connectors
The ISM 1WB Single Output Wideband Board adds a single, universal pass-through wideband output on 5-BNC connectors. As with all
output boards, the Single Output Wideband Board features stereo audio output on a captive screw connector.
Part # 70-547-01
ISM 2WB
Dual Output Wideband Board with 15-pin HD Connectors
The ISM 2WB Dual Output Wideband Board adds two universal pass-through wideband outputs on 15-pin HD connectors. The dual
output design frees board slots for additional signal processing needs. Corresponding stereo audio outputs are provided on captive
screw connectors.
Part # 70-547-02
I n t e g r at i o n s c a l i n g m u lt i s w i t c h e r
Specifications
Video
Video output — ISM MTP UT 4DA
Routing.......................................................... .8 x 2 matrix up to 8 x 8 matrix, depending on model and
configuration
Gain............................................................... Unity (outputs 1 and 2)
Bandwidth..................................................... .450 MHz (-3 dB), fully loaded (main unit, outputs 1 and 2)
350 MHz (-3 dB) for wideband single/dual boards
Number/signal type....................................... .4 sets of proprietary analog signals
Connectors.................................................... .4 female RJ-45
Maximum resolution...................................... .1920x1200
Video input— main unit
Number/signal type....................................... .8 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video
(interlaced or progressive), S-video, composite video
Nominal level................................................. .1 Vp-p for Y of component video and S-video, and for
composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Sync— main unit
Input type...................................................... .RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for
component video
Output type.................................................... .RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for
component video (follows input) (outputs 1 and 2)
Standards...................................................... .NTSC 3.58, PAL
Input level...................................................... .0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level................................................... .AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
Video output— ISM RGB scaled output
Scaled resolution........................................... .640x4801,2,3,4,5,6, 800x6001,2,3,4,5,6, 852x4801,2,3,4,5,
1024x7681,2,3,4, 1024x8521,2,3,4, 1024x10241,2,3,
1280x7681,2,3,4, 1280x8001,2, 1280x10241,2,3,
1360x7651,2,3, 1360x7681,2,3, 1365x10241,2, 1366x7681,2,3,
1400x10501,2, 1440x9002,7, 1600x12001,2, 1680x10502,
1920x12002
HDTV: 480p2,8, 576p1,5, 720p1,2,8, 1080p1,2,8, 1080i1,2,8,
1080p Sharp
1
= at 50 Hz, 8 = at 59.94 Hz, 2 = at 60 Hz, 3 = at 72 Hz, 7
= at 75 Hz, 4 = at 96 Hz, 5 = at 100 Hz 6 = at 120 Hz
Video output— ISM VS scaled output
Scaled resolution........................................... .640x4801,2, 800x6001,2, 852x4801,2, 1024x7681,2,
1280x7681,2, 1280x10241,2, 1360x7651,2, 1360x7681,2,
1365x10241,2, 1366x7681,2, 1400x10501,2
HDTV: 480p2, 576p1, 720p1,2, 1080p1,2, and 1080i1,2
1
= at 50 Hz, 2 = at 60 Hz
Video output— wideband outputs:
• Main unit outputs 1 and 2 (pass-through)
• ISM 1WB single-output wideband board
• ISM 2WB dual-output wideband board
Nominal level................................................. .1 Vp-p for Y or component video and S-video, and for
composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video
Video output — ISM DVI scaled output
Scaled resolution........................................... .640x4804,5,6, 800x6004,5,6, 852x4804,5,6, 1024x7684,5,6,
1024x8524,5,6, 1024x10244,5,6, 1280x7684,5,6,
1280x8004,5, 1280x10244,5,6, 1360x7654,5,6,
1365x7684,5,6, 1365x10244,5,6, 1366x7684,5,6,
1400x10504,5, 1440x9005,7, 1600x12004,5, 1680x10505,
1920x12005
HDTV: 480p5,8, 576p4, 720p4,5,8, 1080i4,5,8, 1080p1,2,3,4,5,8,
1080p Sharp
1
= 24 Hz, 8 = at 59.94 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz,
5
= 60 Hz, 6 = 72 Hz, 7 = 75 Hz
Video output — ISM SC
Number/signal type....................................... .1 NTSC/PAL RGsB, component video (with bi-level sync), or
S-video
1 NTSC/PAL composite video
Nominal levels............................................... .1 Vp-p for Y or component video and S-video, and for
composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video
Minimum/maximum levels............................ .0.0 V to 1.0 Vp-p (follows input)
Impedance..................................................... .75 ohms
Audio — main unit
Gain............................................................... Unbalanced output: -6 dB
Balanced output: 0 dB
Frequency response...................................... .20 Hz to 20 kHz, ±0.5 dB
THD + Noise.................................................. .0.03% @ 1 kHz at nominal level, 0 dB gain
S/N................................................................ >90 dB, at maximum rated output drive
Crosstalk....................................................... .<80 dB @ 1 kHz, fully loaded
Stereo channel separation............................ .>90 dB @ 1 kHz
CMRR............................................................. .>75 dB @ 20 Hz to 20 kHz
Audio input — main unit
Number/signal type....................................... .8 stereo, balanced/unbalanced
Connectors.................................................... .(8) 3.5 mm captive screw connectors, 5 pole
Impedance..................................................... .>10k ohms, balanced/unbalanced, DC coupled
Nominal level................................................. .+4 dBu (1.23 V), -10 dBV (316 mV)
Maximum level.............................................. .+19.5 dBu, (balanced or unbalanced) at 1% THD+N
Input gain adjustment................................... .-18 dB to +24 dB
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — main unit
Number/signal type....................................... .2 (base model, upgradable to 8) stereo, balanced/
unbalanced
Connectors.................................................... .(2, upgradable to 8) 3.5 mm captive screw connectors,
5 pole
Impedance..................................................... .50 ohms unbalanced, 100 ohms balanced
Gain error...................................................... .±0.5 dB channel to channel
Maximum level (Hi-Z).................................... .>+21 dBu balanced or >+15 dBu unbalanced at 1%
THD+N
Maximum level (600 ohm)............................. .>+15 dBu, balanced or unbalanced, at stated 1% THD+N
Output volume range..................................... .0 to 64 (-64 dB to 0 dB) increments from steps 1
through 64
Control/remote — switcher
Serial host control port.................................. .1 rear panel RS-232 or RS-422, 9-pin female D connector
1 front panel RS-232 2.5 mm mini stereo jack
Baud rate and protocol.................................. .9800 baud, 8 data bits, 1 stop bit, no parity
Ethernet control port..................................... .1 RJ-45 female connector
Ethernet data rate......................................... .10/100Base-T, half/full duplex with autodetect
Ethernet protocol........................................... .ARP, ICMP (ping), TCP/IP, Telnet, HTTP
Default settings............................................. .Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
Program control............................................ .Extron’s control/configuration program for Windows®
Extron’s Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Netscape
Navigator, Telnet
Video output — ISM HDSDI scaled outputs
Scaled resolution........................................... .720p1,2,3,4,5,6, 1080i4,5,6, 1080p1,2,3
1
= 24 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz, 5 = 59.94 Hz, 6
= 60 Hz
Specifications are subject to change without notice.
I n t e g r at i o n s c a l i n g m u lt i s w i t c h e r
Specifications (Cont.)
Control/remote — ISM MTP UT 4DA (pass-through)
Serial control................................................. .4 RS-232 on (2) 3.5 mm captive screw connectors, 3 pole:
2 bidirectional (via outputs 1 and 3), 2 unidirectional (via
outputs 2 and 4)
Baud rates..................................................... .Up to 38400 bps at up to 600’ (183 m) (Higher data rates
and distances are possible. Performance will vary based on
baud rate and cable length.)
NOTE: Protocol is mirrored between the transmitter board and the receiver.
CONTROL
INPUTS
1
2 3 4 5
6 7
8
ENTER
ENTER
PRESET
VIEW
1
2 3 4 5
6 7
8
COLOR/
TINT
BRIGHT/
CONT
DETAIL
I/O
IO
ESC
AUDIO
VIDEO
ADJUST
CONFIG
OUTPUTS
WINDOW/ WINDOW/ WINDOW/
IMAGE
IMAGE
IMAGE
POSITION
SIZE
ZOOM
MENU
NEXT
PICTURE ADJUSTMENTS
ISM 824
INTEGRATION SCALING MATRIX
ISM 824 - Front
General
INPUTS
5
6
7
OUTPUTS
8
1
R/R-Y
R/R-Y
G/Y
VID
G/Y
VID
2
RGB/R-Y,Y,B-Y
/YC/VID
4
R/
R-Y
3/5
B/C
B-Y
B/C
B-Y
H/HV
H/HV
H/
HV
V
V
OUTPUT
100- 240V
50/60 Hz
1.2A MAX.
4/6
V
INPUTS
1
2
3
4
C
R/
R-Y
R/
R-Y
G/Y
G/Y
Y
B/
B-Y
B/
B-Y
RGB/R-Y,Y,B-Y
/YC/VID
LAN
ACT LINK
REMOTE
OUTPUT
G/Y
B/
B-Y
H/
HV
VID
V
GENLOCK IN
V
OUTPUTS
5
6
7
8
1
2
VIDEO
SCALER
DUAL
WIDEBAND
SCAN
CONV
UNIV
SCALER
OUTPUT
3/5
RGB/R-Y, B-Y
/YC/VID
ISM 824 - Back
R/
R-Y
C
R/
R-Y
R/
R-Y
6
5
4
Y
G/Y
3
OUTPUT
4/6
RGB/R-Y, B-Y
/YC/VID
G/Y
G/Y
B/
B-Y
B/
B-Y
B/
B-Y
H/
HV
H/
HV
VID
V
V
Part number
DUAL
WIDEBAND
ISM 1WB
ISM VS
ISM SC
R/
R-Y
G/Y
V
UNIVERSAL
SCALER
ISM RGB
Specifications are subject to change without notice.
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
UNIVERSAL
SCALER
ISM DVI
UNIVERSAL
SCALER
ISM HD SDI
Tx Rx
Tx Rx
LOCAL
AUDIO OUTPUT
HD-SDI
H/
HV
INSERT 1/2
RS-232
INSERT 3/4
1
B/
B-Y
3
4
ISM 2WB
SCAN
CONVONVERTER
VIDEO
SCALER
WIDEBAND
2
Modular Scaling MultiSwitcher...................................................60-787-01
Analog RGB/YUV Output Board for ISM 824................................70-544-01
Video Scaler Output Board for ISM 824......................................70-545-01
Scan Converter Output Board for ISM 824..................................70-546-01
Single Output Wideband Board for ISM 824................................70-547-01
Dual Output Wideband Board for ISM 824..................................70-547-02
DVI-D Output Board for ISM 824................................................70-624-01
HD-SDI Output Board for ISM 824..............................................70-625-01
Twisted Pair Output Board for ISM 824.......................................70-819-01
3
BUFFERED OUTPUTS
Version Description
ISM 824
ISM RGB
ISM VS
ISM SC
ISM 1WB
ISM 2WB
ISM DVI
ISM HDSDI
ISM MTP UT 4DA
2
DVI
Model
1
Anahiem, CA
RESET
RS232/RS422
Power............................................................ .100 VAC to 240 VAC, 50-60 Hz, 75 watts, internal
Temperature/humidity................................... .Storage: -40 to +158 ˚F (-40 to +70 ˚C) / 10% to 90%,
noncondensing
Operating: +32 to +122 ˚F (0 to +50 ˚C) / 10% to 90%,
noncondensing
Cooling.......................................................... .Fan, left to right (as viewed from the front panel)
Mounting
Rack mount..................................................... .Yes
Enclosure type............................................... .Metal
Enclosure dimensions................................... .5.25" H x 17.5" W x 11.2" D (3U high, full rack wide)
(13.3 cm H x 44.4 cm W x 28.4 cm D)
(Depth excludes connectors and knobs. Width excludes
rack ears.)
Product weight
Main unit......................................................... .14 lbs (6.3 kg)
Optional boards............................................... .0.5 lbs (0.3 kg)
Shipping weight
Main unit......................................................... .21 lbs (10 kg)
Optional boards............................................... .1 lb (1 kg)
Vibration........................................................ .ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety............................................................. .CE, CUL, UL
EMI/EMC......................................................... .CE, C-tick, FCC Class A, ICES, VCCI
MTBF............................................................. .30,000 hours
Warranty........................................................ .3 years parts and labor
NOTE: All nominal levels are at ±10%.
NOTE: Specifications are subject to change without notice.
ISM MTP UT 4DA
Extron USA - East
Extron Europe
Extron Asia
Extron Japan
Extron China
Extron Middle East
+800.633.9876
Inside USA / Canada Only
+800.3987.6673
Inside Europe Only
+800.7339.8766
+81.3.3511.7655
+81.3.3511.7656 FAX
+400.883.1568
+971.4.2991800
+971.4.2991880 FAX
+1.919.863.1794
+1.919.863.1797 FAX
+31.33.453.4040
+31.33.453.4050 FAX
+65.6383.4400
+65.6383.4664 FAX
© 2009 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
Inside Asia Only
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
09-06
68-1348-01
REV. E