Top Bracket for DSA250 Series Enclosure Bottom Bracket of

REV
A
DESCRIPTION
RELEASED TO PRODUCTION FROM
REV 1 W/NO CHANGES PER DSRWHT
3534 PER DSR 03-593 JRM 5/21/03
4-1/4 inch minimum clearance required
above enclosure for lowering it onto brackets.
Top Outside Edge of DSA250 Series Enclosure
Top Bracket for DSA250 Series Enclosure
5-3/8"
between
brackets of
side by side
enclosures
Left Outside Edge of Enclosure
Right Outside Edge of Enclosure
SCALE TO 55-1/8 INCHES
CL
This template is to enable an installer to
quickly locate the centers of the 8 holes required
to attach DSA brackets to a vertical surface.
NOTE:
1. TEMPLATE TO BE BLACK PRINT .
2. FINISHED TEMPLATE SIZE DEFINED BY CROP MARKS.
The 2 brackets are to be flush-mounted
against a vertical surface capable
of supporting the enclosure's weight.
Bottom Bracket of the DSA250 Enclosure
Bottom
Outside
Edge
of DSA250
Enclosure
J MORRISON 5/21/03
CHECKER:
RE ENGINEER:
MECH ENGINEER:
MANUFACTURING ENG:
4-7/8"
between
brackets of
over-under
enclosures
TEMPLATE/MOUNTING/BOX DSA250
REV A
P/N RD0085
APPVD/DATE