CT115 MANUAL - Busy Bee Tools

OWNER’S MANUAL
CT115 – 3pc COMBO KIT
2” BRAD NAILER, NARROW CROWN
STAPLER & 34°
CT115 – 3pc COMBO KIT
As part of the growing line of Craftex tools and equipment, we are proud to offer
the CT115 3pc Combo Kit (Brad Nailer, Narrow Crown Stapler, and Angle Finish
Nailer). The Craftex name guarantees Craft Excellence. By following the
instructions and procedures laid out in this owner’s manual, you will receive
years of excellent service and satisfaction. The CT115 Kit consists of
professional tools and like all power tools, proper care and safety procedures
should be adhered to.
TECHINAL INFORMATION & FEATURES
2” Brad Nailer
Adjustable Exhaust
Nail/Brad Capacity: 18 Gauge
15 – 50mm
Soft grip handle reduces fatigue
Working Pressure: 60-100 PSI
Av.Air Requirement: 3CFM / 85Lt /
min
Air Inlet:
NPT ¼”
Touch-Strike security system
maintains safety for operator
Ideal for decor, furniture
assembly, interior, picture frames,
drawer assembly, upholstery and
more.
Narrow Crown Stapler
Staple Capacity:
18 Gauge upto 1”
¼” Crown,
Soft grip handle reduces fatigue
Working Pressure:
60-100 PSI
Touch-Strike security system
maintains safety for operator
Av.Air Requirement: 3CFM / 85Lt
/ min
Air Inlet:
NPT ¼”
Ideal for decor, furniture
assembly, interior, picture frames,
drawer assembly, upholstery and
more.
34° Angle Finish Nailer
Nail Capacity :
2 ½”
15 Gauge upto
Required Pressure: 70 – 100 psi
Air Requirement:
5cfm
Air inlet:
NPT 1/4"
Adjustable Exhaust
Removable non-marring rubber
driver tip
Adjustable depth of drive
Quick release nosepiece for fast
clearing of jams
Soft grip handle reduces fatigue
Magnesium housing keeps unit
light weight
2
CT115 – 3pc COMBO KIT
2” Brad Nailer
Narrow Crown Stapler
34° Angle Finish Nailer
3
CT115 – 3pc COMBO KIT
GENERAL SAFETY INSTRUCTIONS
EXTREME CAUTION SHOULD BE USED IN OPERATING ALL POWER
TOOLS.
KNOW
YOUR
POWER
TOOL,
BE
FAMILIAR
WITH
ITS
OPERATION. READ THE OWNER’S MANUAL AND PRACTICE SAFE USAGE
PROCEDURES AT ALL TIMES.
•
CONNECT your machine ONLY to the matched and specified power source.
•
WEAR SAFETY GLASSES, RESPIRATORS, HEARING PROTECTION and
SAFETY SHOES when operating heavy machinery. Always wear safety glasses.
•
DO NOT wear loose clothing or jewellery when operating machinery.
•
A Safe Environment is important. Keep the area free of dust, dirt and other debris
in the immediate vicinity of the machine.
•
BE ALERT! Do Not Use prescription or other drugs that may affect your ability or
judgement to safely use this machine.
•
DISCONNECT the power source when making adjustments or repairs.
•
NEVER leave an operating tool unattended.
•
ALWAYS keep all safety guards in place and ensure their proper function.
•
ALWAYS make sure that any tools used for adjustments are removed before
operating the machine.
•
ALWAYS keep bystanders safely away while operating machinery.
•
THINK SAFETY. WORK SAFELY. Never attempt a procedure if it does not
feel safe or comfortable.
4
CT115 – 3pc COMBO KIT
SPECIFIC SAFETY REQUIREMENTS
• When using compressed air, always follow the safety codes of
practice laid out by the compressor manufacturer.
• Damaged or split air hoses can cause a 'whip' hazard. Immediately
replace damaged air hoses.
• Ensure all air couplings are secure and tight.
• Do not try to modify the tool to accept fasteners other than those
specified.
• Only use this equipment for its intended use. Do not modify or
change its design.
• When tool is not in use always disconnect from the air supply.
• A competent person should only carry out maintenance.
• NEVER point the nail gun at people or yourself.
• When using this tool, safety clothing must be worn. Goggles,
gloves and earmuffs are recommended. Tie back long hair and do
not wear loose clothing.
•
Do not allow children to use this tool. Never leave the tool
connected to the air supply before loading nails or staples.
5
OPERATING INSTRCUTIONS
NARROW CROWN STAPLER
1. To load the magazine
with staples,release the
magazine by squeezing
release trigger
2. Insert fasteners
into magazine. See
over leaf for
details.Then shut
magazine by pushing
fully upwards.
3. Check air supply is
at least 60 PSI.The gun
is now ready to use.
Press the head of the
gun onto the work
piece to be fastened
and squeeze the trigger
to fire staples.
6
BRAD NAILER
1. To load the magazine
with nails,release the
magazine by squeezing
click lever
2. Insert fasteners
into magazine. See
over leaf for
details.Then shut
magazine by pushing
fully upwards.
3. Check air supply is
at least 60 PSI.The gun
is now ready to use.
Press the head of the
gun onto the work
piece to be fastened
and squeeze the trigger
to fire nail.
7
34° ANGLE FINISH NAILER
8
9
34° ANGLE FINISH NAILER MAINTENANCE
10
NARROW CROWN STAPLER& BRAD NAILER
MAINTENANCE
• Lubricate gun by applying 2-3 drops of air tool oil to
the air intake daily.
• Keep the gun clean.
• Remove top plate covering striking pin and clean
monthly or after every 50 hours use.
• Use a water separator in compressor line to reduce
Moisture contamination and possible corrosive
damage to tool.
11
CRAFTEX 2 YEAR LIMITED WARRANTY
Craftex warrants every product to be free from defects in materials and agrees to correct such defects where applicable.
This warranty covers two years for parts and 90 days for labour (unless specified otherwise), to the original purchaser
from the date of purchase but does not apply to malfunctions arising directly or indirectly from misuse, abuse, improper
installation or assembly, negligence, accidents, repairs or alterations or lack of maintenance.
Proof of purchase is necessary.
All warranty claims are subject to inspection of such products or part thereof and Craftex reserves the right
to inspect any returned item before a refund or replacement may be issued.
This warranty shall not apply to consumable products such as blades, bits, belts, cutters, chisels, punches etceteras.
Craftex shall in no event be liable for injuries, accidental or otherwise, death to persons or damage to
property or for incidental contingent, special or consequential damages arising from the use of our
products.
RETURNS, REPAIRS AND REPLACEMENTS
To return, repair, or replace a Craftex product, you must visit the appropriate Busy Bee Tools
showroom or call 1-800-461-BUSY. Craftex is a brand of equipment that is exclusive to Busy Bee
Tools.
For replacement parts directly from Busy Bee Tools, for this machine, please call 1-800-461BUSY (2879), and have your credit card and part number handy.
• All returned merchandise will be subject to a minimum charge of 15% for re-stocking and
handling with the following qualifications.
• Returns must be pre-authorized by us in writing.
• We do not accept collect shipments.
• Items returned for warranty purposes must be insured and shipped pre-paid to the nearest
warehouse
• Returns must be accompanied with a copy of your original invoice as proof of purchase.
Returns must be in an un-used condition and shipped in their original packaging a letter
explaining your reason for the return. Incurred shipping and handling charges are not
refundable.
• Busy Bee will repair or replace the item at our discretion and subject to our inspection.
• Repaired or replaced items will be returned to you pre-paid by our choice of carriers.
• Busy Bee reserves the right to refuse reimbursement or repairs or replacement if a third party
without our prior authorization has carried out repairs to the item.
• Repairs made by Busy Bee are warranted for 30 days on parts and labour.
• Any unforeseen repair charges will be reported to you for acceptance prior to making the
repairs.
• The Busy Bee Parts & Service Departments are fully equipped to do repairs on all products
purchased from us with the exception of some products that require the return to their
authorized repair depots. A Busy Bee representative will provide you with the necessary
information to have this done.
• For faster service it is advisable to contact the nearest Busy Bee location for parts availability
prior to bringing your product in for repairs.
12
13