Century HD Options - Miller Industries

Miller Large Wrecker
Options & Features
Walk-Around 2013
©2013 Miller Industries
Electrical and Lighting Options
MMO System
Standard on 7035, 9055 and 1140- 1075S Rotators
Optional – 4024, 5130, 5230, V-50, V-70 and V-100, 1130
Three Solid-State mVECS for wiring junctions, Located in
drivers side forward toolbox or on the turret for a Rotator.
Also new R260 remote receiver in same location, no external
antenna
Two multi-function backlit touch-screen displays
(1 in the cab, 1 at the rear controls)
Wireless Remote System
•  4024, 5130 & 5230 – 8 Function Underlift Remote Standard
Optional 14 Function Available
•  7035, 9055 – 14 Function Underlift & Boom Remote Standard
•  All Rotators – 8 Function Underlift Remote Standard
•  3212 – Option to upgrade to the 14 Function Boom and Underlift Remote
2012 Touchscreen Displays 2 touch screens are standard with either an MMO or MMGO system.
MMGO System (Rotators)
Boom Extension
(from pin)
Allowable
Load
Parts of
Line
Load on
Boom
Elevation Angle
Radius from
Center (for
charts)
Rotational
Angle
2 touch screens are standard with an MMO and MMGO system. But only the
rear display shows load information with the optional MMGO system.
Century MMO & Remote Availability
3212
4024/5130/5230
7035/9055
7035XP/
9055XP
1060 Stick
1130/1140/1060S/
1075S
8 fxn wireless remote only
x
124004404
x
x
124004404
124004404
8 fxn remote and MMO power dist
x
124004537
x
x
124004537
124004510
124004431
124004408
124004408
x
x
x
14 fxn remote and MMO power dist
x
124004511
124004511
x
X
x
XP MMO Power dist. and remotes
x
x
x
124004512
X
x
XP Omit Power Dist (incl remotes)
x
x
x
124004410
X
x
X
X
X
X
X
124004509
Description
14 fxn wireless remote only
8 fxn remote and MMGO power dist
Red=Standard
Optional Switch Panel
Standard on 4024, 5130, 5230, 9055B and 1130
124004404 – Kit for new Units – 4024 and Larger
124004197 – Kit for new Units - 3212
174013109 – Just the Switch Panel for replacement needs, Does Not include the Underlift Switches shown above
Air PTO Override
124002680 (Sgl-Acting) 4024-9055, XP, 1130, 1140
124002681 (Dbl-Acting) 1060S/1075S Rotator
Double Acting
Allows for manual PTO engagement if
there is an electrical failure.
Left – Single Action – also
shows the yellow knob for the
pusher axle air pressure
adjustment.
Flasher Control Box
124004140 -­‐ All Models Video
Five wire hookup-Requires LED lights-10A maximum
Flashes all marker lights on the wrecker body
Strip Lamp Kits
Fits all 02 and newer aluminum toolboxes
124004215 - 180 CB Rotator (All Outriggers)
124004226 - 182 CA/156 CB
124004217 - 3212 CX 138CA
124004227 - 230 CA/204 CB
124004411 - 3212 CX 120CA
124004221 - 24 Tunnel
124004218 - Standard 3212 (84” Body)
124004222 - 30 Tunnel
124004219 - 138 CA
124004223 - 36 Tunnel
124004220 - 206 CA/180 CB
124004224 - 48 Tunnel
124004225 - 156 CA
124004244 - 40 Above Rails Box (Tandem Steer)
Round LED Underlift Lamps
124004448 (pair) All Models - includes bracket
Double-Bulb Rectangular
Halogen Work Lamps
124002723 (pair) All Models
Xenon Boom Lamps - Rotator
124002724 (pair)
Single Bulb
Oval Halogen Work Lamps
124002725 (pair) All Models
Swivel Lamps
124002263 (pair) - All Models
Docking Lights
124002717 (pair)
Can also be used for a Front Outrigger Light (rotators)
3 pair shown
White LED Toolbox Strip Lights
Now standard on all units V30/3212 and larger
Retrofit kits available for 2002 and newer HD Bodies – 0311394
Minimum Order is 6 and then in groups of 3 (6,9,12, etc)
Whelen LED Micro-Edge Pod
124002708 (pair)
For Rotator top-beam front
outrigger, use 124002812includes bracket
Whelen 72” 16-Head LED Lightbar
124002710 - 4 Corner Amber, Halogen Work Lights, Brake-Turn-Tail
Whelen 60” 8-Head LED Lightbar
174001984 - 4 Corner Amber, Halogen Work Lights, Brake-Turn-Tail
Whelen 60” 4-Head LED Lightbar
174002711 - 4 Corner Amber, Halogen Work Lights, Brake-Turn-Tail
M6 Clear Lens Amber LED
124004444 (pairs)
Additional Lighting Options
Flex Lamp Kit
Domintator Lamp Kit
124004452 (pair)
124004449 (pair)
Pylons
Optional Aluminum Tubular Pylons
3212 - 33” - 124002677
CX2 body - 42” - 124004117
Optional Aluminum Tubular Pylons
38” - 124003003
51” - 124003005
Shown with 2 pairs 124004444 (M6)
Aluminum Tubular Pylons can be painted if desired
Optional Aluminum Tubular Pylons
43” – 124004475
38” – “Double Stack”
124004254
Allows for two light bars
For use with Peterbilt & Kenworth Extended Day Cabs
Kenworth
Peterbilt
Stylized Pylons
38” – 124004459
41” – 124004498
48” – 124004508
Pylon includes a 72” 16 Head LED Lightbar
Optional Aluminum 3” Pylon Spacer
124002678
Pylon Wings
124002478 (pair)
Does not Fit the 2009 38 Pylon, 124004254
Fits the 3003 & 3005 Pylons
Does not include lights
Rotator Aluminum Tubular Pylon
124002695 (includes electrical swivel) 1060S/1075S
124004150 (no swivel required) 1130/1140/1060 Fixed
Can be painted if desired
Stainless and Dress-Up Options
Saddle Tunnel and Tool Boxes
Tailboard Dress Up Kits
Diamond Plate
4024 – 124002464
5130, 5230 – 124002402
7035, 9055 - 124004072
Smooth
4024 – 124002464S
5130, 5230 – 124002402S
7035, 9055 – 124004072S
Adding Optional D-Rings will not affect the Part Number
1 ¼” Handrail Kit
124002512
PolyBilt Body Option
Tandem CBs - 156, 180, 204 or 228
Tri-Axle CBs - 180, 204 or 228
Body Shown with Optional Lighting
Century Crossover Tunnel
124004446
Crossover Boxes are available on the following bodies.
4024 – 156” CA and Larger
5130 – 182”CA / 156” CB and Larger
5230 – 156” CB and Larger
7035 – 180” CB and Larger
9055 – 180” CB and Larger
3212 Stainless Kit
CX2 – 120” and/or 138” CA
84” Tall Body
124002613
124002612
Tunnel Box Stainless Shown is Sold Separately
Stainless Kits
2-Door - 124002611
3-Door – 124002613
Tunnel Box Stainless Shown is Sold Separately
Rotator - 124002610
Rotator Kit will Fit both Standard and H-Beam
4-Door - 124002614
Tunnel Box Stainless Shown is Sold Separately
24” Tunnel
124004384 (4024 and larger)
124004385 (3212 and 600R)
Stainless Kit 124004403
48 Tunnel Box (Door)
124004389 (4024 and larger)
Stainless Kit 124002633
30 Tunnel Box
124004386
Stainless Kit 124004402
124004538 (3212 or 600R)
Stainless Kit 124002633
36 Tunnel Box
124004387 (4024 and larger)
124004388 (3212 and 600R)
Stainless Kit 124004256
48 Tunnel Box (Rollup)
124004138 (4024 & Larger)
Stainless Kit 124002633
Toolbox Options
Polished Rails
Stainless Fenderettes (each)
124004593
The Rails are polished from the front to the rear,
stopping at the top taillight.
Not Available on PolyBilt Body
(3 Shown)
Kenworth RH Dummy Stack
124004499
Forks & Attachments
Fork Kit
Standard on:
4024, 5130, 5230, 7035, 9055, 1130, 1140, 1060, 1060S, 1075S2, 1075S
124001669
124001385
124001387
124001623
124001644
124002565
124001393
124001670
124004454
Forks come in Black Primer for Parts Orders
Additional Lift Forks & Attachments
Spring Lift Adapter
124001389 (pr)
Fork Reducer
124002430 (pr)
Standard on:
4024, 5130, 5230, 7035, 9055,
1130, 1140, 1060, 1060S, 1075S2, 1075S
Optional on All Models
Lift Eye Attachment
124002634 (pr)
Optional on All Models
U-Bolt Adapter
124002632 (pair)
Optional on All Models,
Suggested 5130 and Larger Only
Rear Tows Only!
Additional Crossbar Attachments
Offset Fork Holder (pr)
Riser Bracket (pr)
Chain Hook Adapter (pr)
Standard on 5130 and Larger Units
5 Crossbar – 124001718
Standard on ALL Rotators
Optional on all other Models
Standard on 5130 and Larger Units
5 Crossbar – 124001420
Standard on 4024
4 Crossbar - 124002515
4” Crossbar – 124001724
Standard on 4024
4 Crossbar - 124002048
5” Crossbar – 124001514
Standard on 3212
3212 Crossbar - 124002516
3212 Crossbar - 124004078
Standard on 3212
3212 Crossbar - 124002517
Offset Fork Holder Extension
124002230 (pr)
Offset Fork Holder is shown just for Reference
Optional on All Models, Suggested 5130 and Larger Only
Chain Hook Adapters
124002229 (lh/rh pr)
Optional on All Models,
Suggested 5130 and Larger Only
Pintle Hook, Tow Ball,
& 5th Wheel Attachment for 3212
124002645
Pintle Hook Kit
124002211
Optional for 4024 and Larger Units
King Pin Attachment Kit
124001948
Requires 124002211 Pintle Hook Kit
Optional for 4024 and Larger Units
5th Wheel Adapter Kit
124001833
Requires 124002211 Pintle Hook Kit
Optional for 4024 and Larger Units
For Empty Trailers Only-24K Capacity
Additional Attachments
Tow Ball Adapter
124002431
Shown with Optional Convert-a-Ball Shank
Requires 124002211 Pintle Hook Kit
Convert-a-Ball
174017093
Includes Adapter Shank Shown on the Tow Ball Adapter
Euro Bus Lift
124002467 Optional on 5130 and Larger units, 5 x5 crossbar
Bus Lift
124001914 - 5x5 Crossbar (5130 and Larger)
124002033 - 4x4 Crossbar (4024)
XHD Tire Lift
Optional for 50 Ton Units and SDU-4 Underlifts
New Unit - 124002808
Field Retrofits
124002853 – Century - Includes XHD 5x5 Crossbar
124004081 – Vulcan - Includes XHD 5x5 Crossbar
For units already having a 5x5 Fabricated Crossbar
123002808 – Century and Vulcan
Bus Lift Storage System
124002587 For 5x5 Crossbar
Optional on 5130 and Larger Units
Does not fit Rotator Boxes
Can be used with both 124001914 (Heavy Duty) and 124002808 (Extra Heavy Duty) lift systems
External Bus Lift Storage System
124004380 For 5 x 5 Crossbar
Optional on 5130 and Larger Units
Can be used with both 124001914 (Heavy Duty) and 124002808 (Extra Heavy Duty) lift systems
6,000 lb. L-Arm System
124001738 For 5x5 Crossbar
Optional on 5130 and Larger Units
124002416 for a 4x4 crossbar in a 4024
Rear Outrigger Options
Grater Blade Attachment (pr)
D-Ring Kit (pr, 12x15 Spades)
Rear Spade Extension (each)
124002401
124002537
124002618
For Use with 4024, 5130, 5230, 7035, 9055 without the Optional Outriggers
Ground Penetrating Plate
124004091
Fits Rotator, Integrated, and XP units
Sold each, includes a pin
Accessories
Wide Load Bars
36” Wireless LED
36” -
124004494
124004494 – (cord sold separately)
Includes 7 Way Plug-in Transmitter
174019033 – 60’ 7 Way Cord
Safety Chain Roller Kit
Integrated Version - 124004450 - Optional All Models
Rotator Version – 124004473- (N/A with Dual H-Beam)
Allows for quicker retrieval and return of safety chains into the safety chain pockets
Dual Color Camera Kit
124004442 - Optional on All Units
Includes the color screen inside the cab.
Rotator Placement
Century Integrated Placement
Tailboard Remote
124001979 - Optional on All Units
Rocker switch style replaces push-button style
Lighted Controls – Integrated Units
124002796- Factory Install or Field Retrofit
Lighted controls for XP UNITS are available as
124002815 for Factory install or 124002813 for Field Retrofit
Color Control Handle Kit
124004470- Factory Install or Field Retrofit
Includes enough colored handles to do both sides of a large unit from 4024 through a 6-winch Rotator
Shackles, Straps, Chains,
Snatch Blocks
and Related Items
Washable Chain Box
124002698
Optional on 4024, 5130, 5230, 7035, 9055, and 1060 Units
Alloy Screw-Pin Shackle Kit
124004083 - The shackle kit was made to fit with the
Endless Loop Strap Kit (124002697, Sold Separately)
Kit Includes:
2 ea) 1 1/4 Alloy Master Links 18 Ton
2 ea) 1 Alloy Screw-Pin Shackles 8 1/2 Ton
6 ea) 1 1/4 Alloy Screw-Pin Shackles 12 Ton
2 ea) 1 1/2 Alloy Screw-Pin Shackles 17 Ton
All Made in USA
Optional on all models
Endless Loop Strap Kit
124002697
CAPACITIES IN POUNDS
COLOR
CODE
VERTICAL
YELLOW
CHOKER
MINIMUM
LENGTH
INCLUDES
TWO EACH
BASKET
8400
6720
16800
3 FT
4 FT, 6FT
RED
13200
10560
26400
3 FT
8 FT, 12FT
BLUE
21200
17000
42400
6 FT
12 FT, 16 FT
Optional on all models
(124004521 is the same kit but without the blue straps, for 3212)
Chain Kit
174025093
• 
• 
• 
• 
• 
• 
• 
2 -­‐ 5/16 -­‐ ⅜ Ratchet Binders 2 -­‐ 5/16 x 10 Chains 2 -­‐ 5/16 x 20 Chains 2 -­‐ ⅜ x 10 Chains 2 -­‐ ⅜ x 20 Chains 2 -­‐ ½ x 10 GR100 Chains 2 -­‐ ½ x 20 GR100 Chains Optional on all models, suggested for 4024 and Larger Units
(124002523 is the same kit but without the ½ chains, for use with 3212)
Ratings Labels
Decals only 0501656
(included with 174025093 and 124002523 Chain Kits)
5/8 GR100 Chain Kit
124002820
Includes two each 5/8 GR100 10 and 15 long with a grab hook on each end
Optional on all models, suggested for 1075S and 1075S2
3/8 EDOG Eliminator
GR100 Chain Bridle
124004153
Optional on all models
1/2 EDOG Eliminator
GR100 Chain Bridle
124004588
Optional on all models, suggested for 9055 and Larger Units
1/2 GR100 Foundry Hook Kit
124004156 (2 Hooks, 2 Shackles)
Optional on all models - Does not include the Blue Chain
Crosby Alloy Snatch Blocks
8 Ton - 124001058
12 Ton - 124001886
Optional on all models
Optional on all models
Suggested for units with 35K and smaller winches
Suggested for units with 50K and Larger Winches
Made in USA
Spreader Bar
124004417 (each)
Can be configured for 100”, 105” and 110” lengths
Shown with optional shackles and straps
Short Spreader Bar Tube –
Allows for 58”, 63” and 68” lengths
124004417 (each)
Optional Mounting Kit - 124004436
Swivel Equalizer
124004471 – 17 Metric Tons (37,400 lbs.)
This attachment features a bearing that allows you to easily rotate a load, making it an ideal attachment
to use with a rotator when trying to position equipment or machinery.
Tool Compartment
Organization and Storage
Snatch Block Bar
124004132 (ea)
Can be used in all large tunnel boxes-snatch blocks sold separately
Dual Snatch Block Storage Kit
124004463 (ea)
Can be used in all large boxes, snatch blocks sold separately.
2 kits shown, each kit contains 1 top and 1 bottom bracket
Shackle and Accessory Hanger Kit
124004414
Includes 5 hangers - does not include shackles
Tunnel Box Attachment Storage
124004539
Attachments and Spreader Bar Tube Storage Not Included.
Works in 36 and 48 Tunnel Boxes
Tunnel Box Fork Storage
36” Tunnel Box - 124004540
48” Tunnel Box - 124004541
Forks and attachments shown are not included
Collapsible Folding Ladder
124004413
Modular Toolboxes
3-Drawer 124002667
4-Drawer 124004166
Modular toolboxes supersede the previous 3-drawer
and replace the 124002668 7-drawer boxes.
These new boxes can be combined to make 6, 7, 8, or
9-drawer boxes-or any other combination of drawers.
They fit all bodies 4024 and larger.
Tunnel Box Shelf Kit
48” Box – 124004131
36” Box – 124002844
30” Box – 124004528
Straps, lumber, and oil dry shown not included
Chains, rack, and attachments sold separately
Tunnel Box Chain Rack
48” – 124004130
36” – 124002689
Chains and attachments sold separately
Additional Options
Air and Electric Storage Kit
Boom Angle Indicator
124004258
124002468 – Integrated
124002440 – 1060
Standard on All Rotators
Optional on All Units
Includes 2 red and 2 blue coiled air lines with fittings,
coiled electric cable and storage rack.
Extendable Rear Spades
3212 & V 30
4024, 5130 and 5230
7035 and 9055
XP Add-Ons
XP Standard Pylon
124002830
Shown with optional lightbar and lights
XP Aluminum Tubular Pylon
124004193
XP Spade (each)
124002619
XP & RXP Bus Lift Storage System
124002525 for XP
124004190 for RXP
Can be used with both 124001914 (Heavy Duty) and
124004079 (Extra Heavy Duty) lift systems
SP Side Pullers
SP 12,000 Sidepuller
124003034
Requires an additional 19
CA for Wreckers
SP 20,000 Sidepuller
124002731
Requires an additional 27 CA
Rotator Options
Rotator Controls By Model - 1130
1130
Standard Controls Manual Controls for Boom FuncIons Manual Control for All Outriggers Wireless UnderliN Remote Non-­‐Backlit Control StaIon Op.onal Controls ProporIonal Controls with Wireless Boom Controller Control StaIons are Backlit Electric Outrigger Controls Passenger Side Manuals Controls Now OpIonal Op.onal Winches 35K Main Winches Upgrade Not Available with Turret Drag Winches OpIonal 25K Belly Drag Rotator Controls By Model - 1140
1140
RXP
Standard Controls Standard Controls Manual Controls for Boom FuncIons Manual Controls for Boom FuncIons Wireless UnderliN Remote Wireless UnderliN Remote Manual Control for All Outriggers Manual Control for All Outriggers Non-­‐Backlit Control StaIon Non-­‐Backlit Control StaIon (Room for 1 OpIonal Auxiliary Drag Winch) (Belly Drag Not Available with Standard Controls) Op.onal Controls Op.onal Controls ProporIonal Controls with Wireless Boom Controller Control ProporIonal Controls with Wireless Boom Controller Control StaIons are Backlit Electric Outrigger Controls Electric Outrigger Controls StaIons are Backlit (Up to 3 Auxiliary Winches) (Up to 3 Auxiliary Winches) Op.onal Winches Op.onal W
inches OpIonal 35K or 50K Belly Drag OpIonal 35K or 50K Belly Drag Or Dual 15K Turret Drag Winches (Requires OpIonal Controls) Boom Turret Drags Not Available with the RXP OpIon Dual 15K Turret Drag Winches with a 35k/50K Belly Drag (Requires OpIonal Controls) Rotator Controls – 1060S, 1075S & S2
Standard Controls Manual Controls for Boom FuncIons Wireless UnderliN Remote Manual Control for All Outriggers Non-­‐Backlit Control StaIon (Room for 1 OpIonal Auxiliary Drag Winch) Op.onal Controls ProporIonal Controls with Wireless Boom Controller Control Electric Outrigger Controls StaIons are Backlit (Up to 4 Auxiliary Winches) Op.onal Winches OpIonal 35K or 50K Belly Drag or Dual 35K Winches And/or Dual 22K Turret Drag Winches Rotator Standard Controls
1130, 1140, 1060S, 1075S
Allows for a maximum of 1 deck drag winch. Not available with two or more auxiliary
winches. Includes manual control handles for all outriggers
Rotator Proportional Lighted Controls
New Units See Matrix Includes LH Only Manual Controls-­‐Includes Panels For Both Sides As Shown (Also Available As A Field Retrofit Kit 124002824) Driver Side
Passenger Side
Proportional Controls Include electric control switches for all outriggers
Optional Passenger Side Manual
Lighted Controls Upgrade
A Proportional system is required for use with this add-on option
New Units 124002803
(For Field Retrofit Use 124002800 -Only Includes Lighted Panels For Both Sides)
This option adds manual controls to the passenger side and replaces the panels as shown on
the lower right of the previous slide.
Colored LED Control Lamps
Standard on all lighted control rotators.
Has colored LED lamps to identify switch functions.
Optional Colored control handles also shown
Rotator Controls Matrix Determine which model in the red, then choose the number of drag winch(es) desired in black for that model. Continue to
the right on the same line and select one of the numbers in the either of the green columns, the first number is for nonlighted controls, the second pair is for lighted/proportional controls. Based on your selection, you will need all the part
numbers listed in that row in the blue boxes. To add manual/lighted controls to the passenger side, you need to add
124004484 to your proportional controls.
Model
Number of
Drag
Winches
Standard
Controls,
Non-Lighted
Proportional
Controls,
Lighted
25k Drag
35k Drag
50k Drag
Dual 35K
Drag
50k Drag
Dual 35K
Drag
Dual 15K
Turret 1140
Dual 22K Turret
1060S or
1075S/1075S2
1130
0
124004211
N/A
_
_
_
_
_
_
_
_
1130
1
124004211
N/A
124004229
_
_
_
_
_
_
_
1140
0
124004208
SEE BELOW
_
_
_
_
_
_
_
_
1140
1
124004208
SEE BELOW
_
124002628
_
_
_
_
_
_
1140
2
N/A
SEE BELOW
_
_
_
_
_
_
124004201
_
1060S/1075S/1140
0
124002588
124004482
_
_
_
_
_
_
_
_
1060S/1075S/1140
1
124002588
124004482
_
124002628
_
_
_
_
_
_
1060S/1075S/1140
1
124002588
124004482
_
_
124002623
_
124004429
_
_
_
1060S/1075S/1140
2
N/A
124004482
_
_
_
124002600
_
124004415
_
_
1060S/1075S/1140
2
N/A
124004482
_
_
_
_
_
_
_
124004214-1060S
124004212-1075S
1060S/1075S/1140
3
N/A
124004482
_
124002628
_
_
_
_
_
124004214-1060S
124004212-1075S
1060S/1075S/1140
3
N/A
124004482
_
_
124002623
_
124004429
_
_
124004214-1060S
124004212-1075S
1060S/1075S
4
N/A
124004482
_
_
_
124002600
_
124004415
_
124004214-1060S
124004212-1075S
Dual 22K Turret Drag Winches
124004212 - 1075S and 1075S2
124004214 - 1060S
For customers who may want to add the dual turret winches at a later
date, factory provisions can be added on a new unit, contact the factory for details.
22K Winch Covers
124004533 (pairs)
Kenworth or Peterbilt emblem shown is not included
Dual 15K Turret Drag Winches
124004201 for (1140 Only)
An 1140 can have the following winch combinations:
2 Main Winches
2 Main Winches and 2 - 15K Turret Drag Winches
2 Main Winches and 1 - 35K Belly Drag
For customers who may want to add the dual turret winches at a later
date, factory provisions can be added on a new unit, contact the factory for details.
Provisions - Turret Drag Winches
Turret Drag Provisions give you the mounting plates, plumbed hydraulic
lines and boom end weldment (not the boom end swivels).
1140 – 124004201
1060S – 124004189
1075S – 124004188
Requires Appropriate Controls
Turret Provisions give you everything but the Winches, Cables and Boom End Swivels.
1130 25K Belly Drag Winch
Requires appropriate controls
35K Also Available
Belly Drag Options
35K – 124002628
1140, 1060S, 1075S
Requires Appropriate Controls
50K – 124002623
1060S and 1075S Only
Requires Appropriate Controls
Dual 35K Belly Drag Winches
124002600
Requires appropriate controls-1060S/1075S Only
Dual H – Belly Drag Options
Single 50K
Dual 35K
1140 RXP
Note new toolbox under legs-now standard (1 each side)
Rotator D-Ring Package
124004461 (9 pieces total) (1060S/1075S2/1075S only)
Chrome D-rings shown are additional cost
Note-this replaces 124002750, 124002762, and (2 qty)124002413
Rotator Tailboard Options
Diamond Plate Tailboard Alum Pkg 124002595
Smooth Plate Tailboard Alum Pkg 124004185
Standard D-Rings
(AddiIonal D-­‐rings included in 124004461 shown) 1130 & 1140 Underlifts
Standard LDU
Optional LDU Lowrider
139 Reach
148.5 Reach
Optional on 1130 and 1140 as 124004202
SDU-4 – 143.5” Reach
Standard on 1060, 1060S, 1075S2, 1075S
Optional on the 1140 - 124004192
Not available on the 1130
SDU-4 Lowrider – 165.5” Reach
Optional on 1060, 1060S, 1075S2
Optional on the 1140 - 124004191
Not available on the 1130
HHU – 135” Reach
Standard on 1075S Dual H-beam
HHU Lowrider – 141” Reach
Optional on 1075S Dual H-beam
HHU Street and Coach Versions Available
H-Beam Front Outriggers
Optional on All Rotators
3-Stage (262”)– 1140, 1060S, 1075s - 124004152
2-Stage (212”) – 1130 and 1140 - 124004151
Note holes that allow legs to be pinned fully in or out during a side pull
Rotator 4-Stage Rear Outriggers
Standard – 1140, 1060S and 1075S
Not available on 1130, 1130 comes with 3-Stage Version
H-Beam Outrigger Cover Kit (pr)
124004383
H-Beam Enlarged Pad
124004544 Dual H-­‐Beam 124004545 Front H-­‐Beam Only
Rotator Front Spade Attachment
124002691 (each)(Top Beam Outriggers)
Does not Fit H-Beam Enlarged Pad
H-Beam Spade Attachment
124004175 (each) (H-Beam Low Outriggers)
Will not work with Enlarged Pad Option
Note Product Feature of H-Beam Low Outriggers, Standard Tieback Lug for Screw-Pin Shackle
Shackle not included
Rotator Winch-Bucket Alum Dress-Up
Diamond Plate 124002788 Smooth 124004110 For 1060S and 1075S Includes 5 pieces
Personalized Winch
Bucket Dress-Up Kit
124002807 (includes 124002788)
Diamond Plate Only
For 1060S and 1075S, not available on 1130/1140
Rotator Winch Bucket
Aluminum Dress Up Kit
Smooth 124004210 For 1130 & 1140 Includes 5 pieces
Narrow Battery Box
124002763
Updated Standard Features
5x5 Fabricated Crossbar
5130 and Larger, including LDU and SDU-4
Larger Tethers on Pins
Underlift Bump Stops
(bolted instead of welded)
Xylan Coated Pins
Xylan pins are used on 3212
and larger units.
Xylan coatings provide
lubrication and controlled
friction, wear resistance, heat
resistance, nonstick and
release properties and, at the
same time, can also protect
from corrosion.
Xylan pins do not eliminate
the need for grease.
2.5 Degree, 4-Stage Rear Outriggers
Retrofittable features for Older Units
Underlift Heel Protection Plate
Now standard Part Numbers for Retrofit
124004464 - 14” Wide SDU4 and Coach Lowriders (7035, 9055, HHU, and SDU4)
124004465 - 9 1/2” - Wide – 4024
124004466 - 10 1/2" Wide - 5130, 5230, 7035, HHU
124004467 - 17" Wide - Street Lowriders (7035, 9055)
124004468 - 12” Wide - 9055, Vulcan
Axle Fork Kit
Standard on all units 3212 and larger- 124004454
’06 Tail Retrofit Kit – Fits 02-06 Bodies
124002839 Rotator
124002840 Non-Rotator
SDU Tilt Cylinder Remote Lube
Retrofit Kit 124003026