"Highest in Subcontractor Satisfaction among Water Heater/Boiler Manufacturers"
Residential Extra Recovery Series (XR)
Energy Saver Gas Water Heater
Photo is of
M-2-XR65T6FBN
The XR Atmospheric Vent FVIR Defender Safety System® Models Feature
(Except M-2-XR75S):
■ Advanced ScreenLok® Technology Flame Arrestor Design—Flame
arrestor is designed to prevent ignition of flammable vapor outside of the water
heater.
■ Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapor burn inside of
the combustion chamber or restricted air flow.
■ Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
■ Pedestal Base—Rugged and durable base allows easy transport, positioning
and provides corrosion resistant contact with floor.
■ Maintenance Free—No regular cleaning of air inlet openings or flame arrestor
is required under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
All XR Models Feature:
■ Factory Installed Hydrojet® Total Performance System—Cold water inlet
sediment reducing device helps prevent sediment build up in tank. Increases
first hour delivery of hot water while minimizing temperature build up in tank.
■ Vitraglas® Lining—Bradford White water heater tanks are protected from the
corrosive effects of hot water by an exclusive ceramic porcelain-like coating.
The Bradford White high silica Vitraglas® lining provides a tough interior surface
for our hot water tanks.
■ Fully Automatic Controls—Built-in energy cut-off switch prevents
abnormally high water temperature for extra safety. Built-in gas pressure
regulation.
■ Side Connections—3/4" NPT tappings allow easy connections for space
heating applications (potable water only).
■ 2" Non-CFC Foam Insulation—Surrounds the tank surface, saving energy
by retarding loss of heat (M-1 models have 1" of insulation).
■ Water Connections—3⁄4" NPT factory installed true dielectric fittings extend
water heater life and eases installation (M-2-XR75S has 1" NPT dielectric
waterway fittings).
■ Factory Installed Heat Traps—Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation
(Except M-2-XR75S).
■ Protective Magnesium Anode Rod—Provides added protection against
corrosion for long trouble-free service.
■ 3x4 “Snap Lock” Draft Diverter—Allows either 3" or 4" vent connections
with inputs of 40,000 BTU/Hr. or less. Over 40,000 BTU/Hr. has the 4" “Snap
Lock” Draft Diverter.
■ Flue Baffle—Maximizes the amount of heat absorbed by the tank and
reduces heat loss during standby periods.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded.
■ T&P Relief Valve—Included.
■ Brass Drain Valve.
■ Design Certified by CSA International (formerly AGA/CGA).
6 or 10-Year Limited Tank Warranties / 6-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
Bradford White received the highest numerical score among water heater/boiler manufacturers in the proprietary J.D. Power and Associates/ McGraw-Hill Construction 2006 HVAC and Water Heater/Boiler Subcontractor Satisfaction StudySM.
Study based on 882 responses measuring 3 water heater/boiler manufacturers and measures opinions of subcontractors. Proprietary study results are based on experiences and perceptions of subcontractors surveyed in May through July 2006. Your
experiences may vary. Visit jdpower.com
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 7,063,133 B2; 5,954,492; 5,954,492; 5,761,379; 5,943,984; 5,081,696; 5,988,117; 6,142,216; 5,199,385; 5,574,822; 5,372,185;
5,485,879; 5,277,171; (B1)5,341,770; 5,660,165; 5,596,952; 5,682,666; 4,904,428; 5,023,031; 5,000,893; 4,669,448; 4,829,983; 4,808,356; 5,115,767; 5,092,519; 5,052,346; 4,416,222; 4,628,184; 4,861,968;
4,672,919; Re. 34,534. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,112,515; 2,108,186; 2,107,012; 2,092,105.
Defender Safety System®, ScreenLok®, Vitraglas® and Hydrojet® are registered trademarks of Bradford White® Corporation.
109-B-0807-A
Residential Atmospheric Vent Gas Water Heater
XR Series Energy Saver Models
Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
79% and 80% Recovery Efficiency
NATURAL GAS AND LIQUID PROPANE GAS
Model
Number
Capacity
Recovery*
90°F Rise
Nat.
LP
U.S. Imp. BTU/Hr. BTU/Hr.
Gal. Gal. Input
Input
M-1-XR403S6FBN
M-2-XR504T6FBN
M-2-XR65T6FBN
M-2-XR75S6BN
Model
Number
M-1-XR403S6FBN
M-2-XR504T6FBN
M-2-XR65T6FBN
M-2-XR75S6BN
40
48
65
75
33
40
54
62
40,000
65,000
65,000
76,000
38,000
61,000
63,000
76,000
Nat. Nat. LP
LP
U.S. Imp. U.S. Imp.
GPH GPH GPH GPH
43
69
69
81
36
57
57
68
Capacity
40
65
67
81
33
54
56
68
Recovery*
50°C Rise
Liters
Nat.
kW
Input
LP
kW
Input
Nat.
Liters/
Hour
LP
Liters/
Hour
151
182
246
284
11.7
19.1
19.1
22.3
11.1
19.1
18.5
22.3
163
261
261
303
151
246
253
306
A
Floor to
Flue
Conn.
B
Jacket
Dia.
E
D
Floor to Floor to
Gas
T&P
Conn.
Conn.
G
Floor to
Space
Heating
Outlet
in.
H
Floor to
Water
Conn.
K
Depth
Approx.
Shipping
Weight
in.
in.
in.
in.
in.
F
Floor to
Space
Heating
Return
in.
in.
in.
lbs.
50
591/4
63
633/4
20
22
24
26
3x4
4
4
4
41
50
531/2
53
13
13
123/16
16
131/2
131/2
131/2
173/4
41
50
531/2
53
481/2
57
603/4
611/4
24
26
28
30
126
164
205
282
A
Floor to
Flue
Conn.
B
Jacket
Dia.
C
Vent
Size
K
Depth
Approx.
Shipping
Weight
mm.
mm.
mm.
mm.
G
Floor to
Space
Heating
Outlet
mm.
H
Floor to
Water
Conn.
mm.
F
Floor to
Space
Heating
Return
mm.
mm.
mm.
kg.
1270
1505
1600
1619
508
559
609
660
76 / 102
102
102
102
1041
1270
1359
1346
330
330
309
406
343
343
342
451
1041
1270
1359
1346
1232
1448
1543
1569
609
660
711
762
57
74
93
127
C
Vent
Size
E
D
Floor to Floor to
Gas
T&P
Conn.
Conn.
All propane heaters are equipped with a cast iron burner. To order a propane heater change suffix “BN” to “CX”.
For 10 year models, change suffix from “6” to “10”.
*Based on manufacturers rated recovery efficiency.
C
B
H
D&G
A
K
**
E
F
**M-1-XR403S water connections are on 8" centers, all other models are 11" centers.
Meets NAECA Requirements
General
All gas water heaters are certified at 300 PSI (2068 kPa) test pressure and 150 PSI (1034 kPa) working pressure. All water connections are 3⁄4" (19mm) NPT.
The M-2-XR75S model has 1" (25mm) NPT connections. All gas connections are 1⁄2" (13mm).
All models design certified by CSA International (formerly AGA/CGA), ANSI Z-21.10.1 and/or 10.3 and peak performance rated.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating.
Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing
heating system or component(s) previously used with a non-potable water heating appliance.
Ambler, PA
For U.S. and Canada field service, contact your professional installer or local Bradford White sales representative.
Sales 800-523-2931 ● Fax 215-641-1670 / Technical Support 800-334-3393 ● Fax 269-795-1089 ● Warranty 800-531-2111 ● Fax 269-795-1089
International: Telephone 215-641-9400 ● Telefax 215-641-9750 / www.bradfordwhite.com
Sales / Technical Support 866-690-0961 / 905-238-0100 ● Fax 905-238-0105 / www.bradfordwhite.com
©2007, Bradford White Corporation. All rights reserved.
109-B-0807-A
Printed in U.S.A.