Cisco TelePresence SX20 User guide

User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Codec C90
Profile 65” Dual
Codec C60
Codec C40
Codec C20
Profile 65”
Profile 52” Dual
Quick Set C20 / C20 Plus
Profile 52”
SX20 Quick Set
TC 5.1
Use with TRC5
User Guide
Cisco TelePresence System Profile Series
Cisco TelePresence System Codec C-Series
Cisco Telepresence System Quick Set C20 / C20 Plus
Cisco Telepresence SX20 Quick Set
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
1
Profile 42”
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Contents
Getting started
What’s in
this guide?
The top menu bar and the entries in the Table of Contents
are all hyperlinks. Just click on them to go to the topic.
We recommend that you visit the Cisco web site regularly for
updated versions of this guide. Go to: http://www.cisco.com
Getting started
Waking up the system...................................................... 4
Overview of the remote control........................................ 5
Navigating in the menus................................................... 6
Entering text in text fields................................................. 7
Text entry essentials..................................................... 7
Invoking the virtual keyboard........................................ 7
Virtual keyboard details................................................ 7
Screen layout.................................................................... 8
Tip: Adding a wallpaper to your screen........................ 8
Layout control............................................................... 8
Camera presets................................................................ 9
Where to find camera presets...................................... 9
Using the presets.......................................................... 9
Adding a new camera preset..................................... 10
Editing an existing camera preset...............................12
Camera settings..............................................................14
Adjusting the exposure of the camera........................14
Adjusting the whitebalance of the camera..................14
Main source.................................................................... 15
Main source settings.................................................. 15
Call settings—an overview.............................................. 15
The call settings options............................................. 15
Call settings—auto answer options................................. 16
The options in detail................................................... 16
Call settings—default call rate......................................... 16
The default call rate options....................................... 16
Language settings...........................................................17
Language settings options..........................................17
About the setting of date and time..................................17
Date and time settings overview.................................17
Setting date and time yourself....................................... 18
Deactivated NTP server.............................................. 18
Setting date and time automatically............................... 18
Activated NTP server.................................................. 18
Making calls
In-call features
Selecting ring tone......................................................... 19
Ring tone selection..................................................... 19
Setting ring tone volume................................................ 19
Ring tone volume settings.......................................... 19
Setting key tone to on or off........................................... 20
Key tone setting.......................................................... 20
Setting wallpaper on your screen................................... 20
Wallpaper setting options........................................... 20
Inserting your own wallpaper......................................... 21
System information......................................................... 21
Entering the Advanced configuration............................. 22
Advanced configuration entering............................... 22
Restarting the system..................................................... 22
Restarting................................................................... 22
Making calls
Placing calls by specifying the name,
number or address..................................................... 24
Placing calls using the phone book............................ 25
Placing calls by means of the Recent calls list........... 26
When someone is calling you..................................... 27
Terminating an ongoing call........................................ 27
Management systems booking list............................. 27
Calling more than one (optional).................................... 28
Setting up a list of whom to call before calling them..... 28
Calling participants one by one.................................. 28
Terminating a video conference................................. 28
Using Multiway™ to call more than one........................... 29
Using Multiway, Case 1.............................................. 29
Using Multiway, Case 2.............................................. 29
Which codec does my system have?............................. 30
Phone book usage
Basic phone book features............................................. 32
Navigating in the phone book..................................... 32
Calling an entry in the phone book............................. 32
Opening the phone book............................................ 32
Searching in the phone book......................................... 33
How to search for an entry......................................... 33
Adding new contacts to the phone book....................... 34
Adding an entry from recent calls or the phone book....34
Adding an entry manually to My contacts.................. 34
Editing existing entries in the phone book..................... 35
Editing entries in the phone book............................... 35
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
Phone book usage
2
Scheduled meetings
Advanced settings
In-call features
Sharing contents............................................................ 37
Dual video stream....................................................... 37
Sharing PC contents................................................... 37
If the shared contents fail to show.............................. 37
Selecting the source................................................... 37
Controlling the cameras................................................. 38
Controlling your own camera (near side).................... 38
Controlling far end camera (far side).......................... 38
Scheduled meetings
Joining a meeting........................................................... 40
To join a meeting or not.............................................. 40
Learning more about a meeting..................................... 40
Viewing meeting details.............................................. 40
Displaying a list of upcoming meetings...........................41
To display a meetings list you can navigate within......41
Meeting details of any upcoming meeting......................41
Viewing details of any meeting....................................41
Joining when already in a call........................................ 42
Joining the meeting.................................................... 42
Parallel meetings (concurrency)..................................... 42
Selecting which meeting to join.................................. 42
Extending a scheduled meeting..................................... 43
Extending the meeting................................................ 43
Advanced settings
About the Administrator settings.................................... 45
Entering the Administrator settings............................ 45
Administrator settings & password............................. 45
Assigning softbutton functions....................................... 46
Assigning a function to a softbutton........................... 46
Creating softbutton for Main source selection............... 47
Assigning Main source selection softbutton.............. 47
Creating softbutton for Camera Preset.......................... 47
Assigning Camera preset softbutton.......................... 47
Softbutton—Speed dials................................................. 48
Assigning Camera preset softbutton.......................... 48
Customized softbuttons—how they appear.................... 48
Example of customized softbuttons........................... 48
Softbutton—Clearing softbuttons.................................... 49
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Chapter 1
Getting started
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
3
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Waking up the system
To make a call you need to wake up the system from standby. However, if someone
calls you, the system will wake up by itself.
After wake-up, the screen will typically look like this:
• To wake up the system just pick up the TRC5 remote control or press any key. You
may have to point the remote control towards the system to make sure it discovers
you.
The dial-in address or dial-in number of your system
is displayed in the upper left corner.
Date and time of day.
norah.dollhouse@somecompany.com
Sept
20
• The system will now display the wallpaper.
• The dial-in address or dial-in number of your system is displayed in the upper left
corner. If you have questions about the dial-in address or number, contact your
system administrator.
• The screen will also indicate if there are any calls you have missed.
.
Softkeys (described on the following pages).
If the system fails to respond to the remote control or to incoming calls, make sure that:
• The system is connected to line voltage.
• The remote control has working batteries.
• The internal cables, such as the monitor cable and/or the camera cables are properly
connected, see the installation sheet for details, if needed.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
4
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Overview of the
remote control
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Use this key to change the layout on
the screen.
Microphone On/Off.
These keys correspond to the five context
sensitive softkeys along the bottom
of the screen.
Adjust loudspeaker volume.
Use this key to end an ongoing call.
Outside a call, press and hold to enter
the standby mode.
Use the Arrow keys to navigate in the
menus and the center key to confirm
your choice or selection.
When no menu is open, Arrow keys
can be used to move the camera.
Use the keypad to enter letters and
numbers, as with a mobile phone.
Press a key repeatedly to access the
characters displayed on each key.
Use this key to display the Main
menu on the screen.
Use this key to display the Phone
book (your contacts) on the screen.
Press and hold
Press and hold the # key to switch
between touch tone mode (press
and hold), lower case characters and
numbers.
Place a call.
Use this key to enter touch tone mode
(DTMF) in a call. Press the key when
done.
Use this key to remove characters in
a text field.
When entering text this key is used to
toggle between upper and lower case
letters.
Press and hold
Switch to show PC screen on the
system. Press again to go back to the
main camera.
Open the Presentation menu to
select other sources.
Press and hold
Press and hold to change between
characters and numerics.
Waking up the system
Grab the remote control and make sure your hand
touches the rubber line sensors located on both sides of
the remote control, or just touch any key on the remote
control.
Zoom the camera.
D14844.01 May 2011
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
5
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Navigating in the menus
• In an input field, pressing C will delete characters/numbers to the left of the cursor
position.
Use the remote control to operate your video system. A few basic navigation
principles are all you need to know to get started.
• Press the Home key ( ) to show the Home menu or wake up the system by lifting
the remote control.
• When the system shows the Home menu only (see the Fig. below), pressing Home
key ( ) will hide the menu. To bring it back, press the Home key ( ) again.
• The Arrow keys in the center of the upper part of the remote control are used to
navigate in the menus.
• In an input field, pressing C will delete characters/numbers to the left of the cursor
position.
• When the system shows the Home menu only (see the Fig. below), pressing Home
key ( ) will hide the menu. To bring it back, press the Home key ( ) again.
Press the
key to display the Home menu on the screen.
HOME
The element currently
selected is indicated by an
orange rectangle.
Call
Use the and Arrow
keys to navigate up and
down in a menu.
Presentation
Meetings
The little triangle
indicates that
a submenu is
available.
Sept
20
Camera control
RECENT CALLS
alice.wonderland@company.co.nla
Received 20.09.11 16.29
Settings
hedda.gabler@somecompany.org
Placed 20.09.11 15.10
dorian.grey@myself.net
Missed 20.09.11 14.55
frodo,b.aggins@myshire.org
Received 20.09.11 12.20
HOME
CALL
floria.tosca@somecompany.org
Placed 20.09.11 08.17
Call
Meetings
Call
Call
Presentation
Presentation
Phone book
Example showing a submenu displayed by pressing the right arrow key.
Camera control
control
Camera
Recent calls
Settings Add another participant
Settings
View Recent calls
Call
Enter
Call
Meetings
Call
MeetingsCall
Presentation
Presentation
Phone book
Presentation
Camera control
Camera
Recent
Cameracontrol
control calls
Settings
Settings Add another participant
Settings
Use the Home key ( ) to exit all menus
and return to showing the Home menu
only.
Delete call history
Call rate 768 kbps
HOME CALL
HOME
contact...
123
Context sensitive softbuttons
corresponding to the function
keys of the
remote control.
Softbuttons not used in a
given context are shown
ghosted (gray).
Use the Arrow key to collapse the
menu expansion (to go back one
level).
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
6
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Entering text in text fields
• Press Function key number two from the left to invoke the virtual keyboard if it
does not appear by itself.
Some menu fields expect text information to be entered. This is used to enter the
name, number or address of the person you want to call as well as for such things as
to search in the phone book and to maintain your list of contacts (the My contacts).
• Use the
Arrow key to move the cursor inside the keyboard.
• Use all four Arrow keys to move about the keyboard.
• When the required key is reached, press
entry field.
Text entry essentials
• If you press a number key when you are not in a call, the Call menu will be shown.
• If you navigate to the alpha/numeric selection field, pressing will take you to
numeric from alpha and vice versa. Navigate and select inside here to the extent
needed. The same principle applies if you need to enter special characters.
• The system will automatically switch to text mode (abc) inside entry fields expecting
text entries. The easiest and most convenient way of entering letters is by invoking
the on-screen virtual keyboard. Do as shown below to invoke the keyboard.
• Once entered, press the Function key to hide the keyboard. This will put your entry
into effect.
• You may also use the keypad in the same manner as when composing text
messages on a mobile phone, but the virtual keypad is by far more convenient and
it is also faster to use.
Virtual keyboard details
Invoking the virtual keyboard
Navigate to here
and click to switch
between letters and
digits.
HOME CALL
Enter
Call
contact...
123
HOME CALL
Call
MeetingsCall
Presentation
Phone book
Presentation
Enter
Call
Camera
Recent
Cameracontrol
control calls
Call
MeetingsCall
Settings Add another participant
Settings
abc / 123
to have the letter or digit inserted in the
Turn keyboard on
contact...
123
Presentation
Phone book
Presentation
Navigate to here
and click to
access special
characters.
Camera
Recent
Cameracontrol
control calls
Settings Add another participant
Settings
abc / 123
Turn keyboard on
Press as shown to
produce the virtual
keyboard.
Context sensitive
fields will appear
here. In this example
you may start a call
from here.
Press again to hide
the virtual keyboard.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
7
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Screen layout
Layout control
The layout of the screen can be changed as shown to the right.
To show the display options screen, press the Layout (
may get to it through Settings > Layout.
) key. Alternatively, you
SETTINGS
Layout
• Use the Arrow keys to move between the alternatives and use
alternative you want to use.
Main source: Camera
to select the
Call settings
Language: English
• You may—or may not—include selfview (to show the outgoing video signal from
your own system). This will show you what others will see from your system.
Layout control outside a
call is limited to the choice
between showing selfview
and showing a wallpaper...
However, if you
already have
activated the
selfview, the menu
will give you these
options when you
enter the menu
again.
Date and time
Call
Sounds and alerts
Meetings
LAYOUT CONTROL
Presentation
System information
Show selfview
Camera
control
Advanced
Tip: Adding a wallpaper to your screen
In the Home menu, navigate down to
Settings and press the key.
Wallpaper
Restart
Settings
Main source: Camera
Call settings
Language: English
HOME
Wallpaper: Growing
SETTINGS
Layout
SETTINGS
HOME
LAYOUT CONTROL
Date and time
Call
Hide selfview
Sounds and alerts
Meetings
Wallpaper: Growing
Presentation
System information
Wallpaper with selfview
Camera
control
Advanced
Full screen selfview
Restart
Settings
Layout
Main source: Camera
Call settings
HOME
Call
Language: English HOME
Date and time
Call
Sounds and alerts
Meetings
Meetings
Wallpaper: Growing
Presentation
Presentation
System information
Camera control
In the Settings
submenu
navigate down
to Wallpaper.
Press
again.
SETTINGS
Layout
Main source: Camera
Call settings
Language: English
Camera
control
Administrator
settings
Settings
Layout control when in a
call provides the choice
of showing selfview or full
screen participant...
HOME
Date and time
Call
Restart
Settings
Sounds and alerts
Meetings
Wallpaper: Growing
LAYOUT CONTROL
Presentation
System information
Show selfview
Camera
control
Advanced
Full screen participant
Restart
Settings
However, if you
already have
activated the
selfview, you may
select where the
selfview should
appear in the image
when you enter the
menu again.
SETTINGS
Layout
Main source: Camera
Call settings
Language: English
Date and time
HOME
LAYOUT CONTROL
Call
Show selfview
Sounds and alerts
Meetings
Wallpaper: Growing
Speaker participant
System information
Presentation
Camera
control
Advanced
Full screen participant
Restart
Settings
SETTINGS
Layout
Change remote layout (the outgoing video) when hosting
MultiSite Conference...
Main source: Camera
Call settings
Language: English HOME
Select between the options
available and press the
key to leave the menu
putting your choice into
effect. See also page
20 for more on this.
Date and time
Call
LAYOUT CONTROL
Sounds and alerts
Meetings
Wallpaper: Growing
Presentation
System information
Show selfview
None
Speaker participant
Growing
Camera
control
Administrator
settings
Summersky
Restart
Settings
Custom
Full screen participant
Remote layout
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
8
Pressing Layout
( ) will produce a
softkey letting you
choose the layout
of the outgoing
video. Select among
all defined layouts
available. Note that
you have no influence
on the actual layout on
the remote system.
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Camera presets
Using the presets
You may create predefined settings of where the camera points and the zoom. This
is referred to as camera presets. See the next page for more.
HOME
Call
CAMERA PRESETS
Pos. 1
Meetings
Pos. 2
Presentation
Pos. 3
Camera control
Edit camera preset
Settings
Camera presets must have been defined before you
do this.
Where to find camera presets
Press the
key on the remote control to display the
Home menu and select Camera control. Use the and
Arrow keys to navigate in the menu. Use to select
a preset. The camera will now move accordingly. Note
that this feature may be used any time.
Sept
20
Camera presets
Camera settings
Main source
Exit
Camera presets must have been defined
before you do this.
Press the
key on the remote control to
display the Home menu and select Camera
control. Use the 0~9 keys to select a preset.
The camera will now move accordingly. Note
that this feature may be used any time.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
9
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Adding a new camera preset (I)
HOME
LAYOUT CONTROL
Call
Show selfview
Meetings
Presentation
Wallpaper
Camera control
Outside a call, press the
Layout key and select Show
selfview followed by the
key, if needed. You will now
see the outgoing video from
your system.
Settings
Press the key to display
the Main menu and
navigate to
Camera control.
Adjust pan, tilt and
zoom, as required.
Press the
This will display the softkeys along the bottom of the
screen, as shown.
key.
SET CAMERA PRESETS
Default
Zoom out
Whiteboard
CAMERA PRESETS
Camera presets
Camera settings
Main source
Exit
CAMERA PRESETS
Pos. 2
Default
Pos. 2
Zoom out
Pos. 3
Whiteboard
Not defined
Not defined
Not defined
Not defined
Edit camera preset
Display the Camera presets
menu by pressing the Function
key corresponding to the
Camera presets softkey on
the remote control to open the
menu.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
In the Camera presets menu
navigate to Edit camera preset
and press the key.
Any presets already existing are
listed here.
10
Edit camera preset
Not defined
Not defined
Navigate to the undefined
preset you would like to define.
When you have located it,
press the key.
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Adding a new camera preset (II)
The virtual
keyboard will now
automatically be
invoked by the
system.
4:NEW PRESET
EDIT CAMERA PRESETS
Default
Zoom out
Whiteboard
Name
abc
4:NEW PRESET
Name
abc
4:NEW PRESET
charl
Name
Save new preset
Save new preset
Save new preset
Cancel
Cancel
Cancel
abc
Not defined
CAMERA PRESETS
Not defined
Default
Not defined
Zoom out
Not defined
Whiteboard
Not defined
Edit camera preset
Not defined
Use the
Arrow key
as shown to move
the cursor up into the
virtual keyboard (the
cursor is indicated by
an orange square).
Give the new preset a
descriptive name.
Use the Arrow keys to
move about the keyboard
and the key to select a
character.
Access special characters
and numerics by means of
the corresponding keys.
abc
SET CAMERA PRESETS
4:NEW PRESET
Name
charlie watts
Save new preset
Press the key to put your
changes into effect. This
will be confirmed by the
system.
Default
Zoom out
Whiteboard
charlie watts
Not defined
Not defined
Cancel
Not defined
Not defined
Not defined
Arrow
Press the
key a sufficient number
of times to move the
cursor down to Save new
preset, as shown.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
To leave the menu, press
the key.
Alternatively, you may
define another preset or
redefine existing (see the
following page for more).
11
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Editing an existing camera preset (I)
LAYOUT CONTROL
HOME
Show selfview
Call
Meetings
Wallpaper
Presentation
Camera control
Outside a call, press the
Layout key and select Show
selfview followed by the
key, if needed. You will now
see the outgoing video from
your system.
Settings
Adjust pan, tilt and
zoom, as required.
Press the key to display
the Main menu and
navigate to
Camera control.
Press the
This will display the softkeys along the bottom of the
screen, as shown.
key.
SET CAMERA PRESETS
Default
Zoom out
Whiteboard
CAMERA PRESETS
Camera presets
Camera settings
Main source
Exit
CAMERA PRESETS
Pos. 2
Default
Pos. 2
Zoom out
Pos. 3
Whiteboard
Not defined
Not defined
Not defined
Not defined
Edit camera preset
Display the Camera presets
menu by pressing the Function
key corresponding to the
Camera presets softkey on
the remote control to open the
menu.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
In the Camera presets menu
navigate to Edit camera preset
and press the key.
Any presets already existing are
listed here.
12
Edit camera preset
Not defined
Not defined
Navigate to the existing preset
that you would like to redefine.
When you have located it,
press the key.
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Editing an existing camera preset (II)
3:WHITEBOARD
EDIT CAMERA PRESETS
Default
Update to current camera position
Zoom out
Whiteboard
CAMERA PRESETS
Default
Zoom out
Not defined
Delete preset
Cancel
Not defined
Press the key to put your
changes into effect. This
will be confirmed by the
system.
Not defined
Not defined
Whiteboard
Edit camera preset
Not defined
Not defined
Navigate to:
• Update to current camera position to
redefine the preset
• Delete preset to remove it from the list
• Cancel to prepare to leave the menu
undoing any updates.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
13
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Camera settings
Camera settings let you adjust the exposure and whitebalance.
2.Press the
Do as follows:
3.This will cause softbuttons to appear. Press the Function key corresponding to
Camera settings (Function key number 2 from the left).
key on the remote control to display the Layout menu. Select Selfview
1.Press the
to be shown as required.
key to display the Home menu and select Camera control.
4.Follow the procedures outlined below.
Adjusting the exposure of the camera
Adjusting the whitebalance of the camera
CAMERA SETTINGS
Exposure
CAMERA SETTINGS
Exposure
Whitebalance
Whitebalance
EXPOSURE
Brightness mode: Auto
Brightness level: 1
Backlight: Off
If you change the Brightness
mode to Manual, the
Brightness level becomes
possible for you to set. Since
Auto has been chosen here,
the actual level is shown
ghosted.
WHITEBALANCE
Whitebalance mode: Manual
Whitebalance level: 1
Since the whitebalance has been set to Manual in this case, you will have access to
setting the whitebalance in the usual manner. Use Automatic if that is more convenient.
Backlight compensates for any backlight shining on
the camera from behind you. Such light conditions
will tend to make you appear darker than needed.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
14
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Main source
Call settings—an overview
You may choose what to use as the main input source. This will typically be the
camera, a secondary camera (if applicable), the PC input or other sources such as a
DVD player.
Use the Call settings menu to set the default bit rate and how the system shall answer
incoming calls. Answering can be set to automatic or to manual. More on this can be
found on the next page.
Do as follows:
Do as follows:
1.In the menu select Settings > Main source and expand the submenu.
2.Use the Arrow keys to move between the alternatives and use
alternative you want to use.
3.Collapse the menu using the
1.In the menu select Settings > Call settings and expand the submenu.
to select the
2.Use the Arrow keys to move between the alternatives and use
alternative you want to use.
Arrow key.
3.Collapse the menu using the
Main source settings
to select the
Arrow key.
The call settings options
HOME
HOME
Call
Call
Meetings
Meetings
SETTINGS
Presentation
Layout
Main source: Camera
Camera control
Layout
Camera control
Settings
Main source: Camera
Settings
Call settings
Language: English
Camera
Date and time
Sounds and alerts
Wallpaper: Growing
Sounds and alerts
System information
Administrator settings
Restart
Call settings
Language: English
PC
Date and time
Wallpaper: Growing
SETTINGS
Presentation
This example has been
taken from a Codec C20
equipped Profile. Larger
systems may have more
options.
System information
Administrator settings
CALL SETTINGS
Auto answer mode: On
Auto answer delay: 5 sec
Auto answer mute: Off
Do not disturb mode: Off
Default callrate: 4000 kbps
Restart
More on Profile systems
and their codecs can be
found on
page 30.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
15
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Call settings—auto answer options
Call settings—default call rate
You may set up your system to answer automatically whenever someone calls you.
If you choose to do so, you may also specify how long time it shall take before your
system connects you.
The Call settings menu lets you set the default call rate expressed as default number
of kilobits per second.
You may want to consult your system administrator to discuss the best setting in your
environment.
For privacy reasons you may want your microphone to be muted (turned off) when the
system answers automatically. Alternatively, you may set the system to Do not disturb.
The options in detail
The default call rate options
CALL SETTINGS
Auto answer mode: On
On
Auto answer delay: 5 sec
Off
Set to On to have your
system answer incoming
calls automatically and Off to
answer them manually.
SETTINGS
128
Layout
256
Do not disturb mode: Off
Main source: Camera
384
Default callrate: 4000 kbps
Call settings
512
Auto answer mute: Off
Language: English
HOME
CALL SETTINGS
Date and time
Auto answer mode: On
Sounds and alerts
Auto answer delay: 5 sec
Meetings
Wallpaper: Growing
Auto answer mute: Off
Presentation
System information
Use the and Arrow keys
to alter how long time it shall
take before your system
connects you. Interval is 0–50
seconds.
Auto answer mode: On
Auto answer delay: 5 sec
Auto answer mute: Off
Do not disturb mode: Off
Call
Default callrate: 4000 kbps
CALL SETTINGS
768
1152
1472
1920
2560
Do
not disturb mode: Off
Camera
control
Advanced
3072
Default callrate: 4000 kbps
Settings
Restart
4000
CALL SETTINGS
Auto answer mode: On
Auto answer delay: 5 sec
Auto answer mute: Off
On
Do not disturb mode: Off
Off
Default callrate: 4000 kbps
CALL SETTINGS
Auto answer mode: On
Auto answer delay: 5 sec
Auto answer mute: Off
Do not disturb mode: Off
Default callrate: 4000 kbps
On
Off
Scroll with the and Arrow
keys to access settings not
shown.
For privacy you may set the
microphone to be muted upon
autoanswer. You will then have to
activate the microphone yourself
(press ).
Options are 128, 256, 384, 512, 768 (initial default), 1152, 1472, 1920,
2560, 3072, 4000 and 6000 bits (not shown in Fig.) per second.
To further enhance your privacy
you may set the system to Do
not disturb. Your system will then
not respond to incoming calls. As
soon as you disable the Do not
disturb any call attempts made
while the feature was enabled
will be listed as missed calls.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
16
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Language settings
About the setting of date and time
This will allow you to specify the language used in the menus and settings shown. The
following languages are supported: English, Norwegian, Swedish, German, French,
Italian, Japanese, Russian, Spanish, Korean, Finnish, Chinese (Simplified), Turkish,
Polish, Hungarian, Czech.
You may have the system pick date and time for you or you may specify date and time
zone settings along with date and time format and the date and time of day itself.
Do as follows:
1.Start from the Home menu and navigate down to Settings and press the key.
Then navigate to Date and time and press the key. Select between NTP mode Off,
Auto and Manual.
Do as follows:
1.Start from the Home menu and navigate down to Settings and press the
2.Then navigate to Language and press the
to select.
key again. Use the
and
key.
Arrow keys
Off: NTP mode is disabled—you will then have to specify date and time
Auto: The system locates the NTP server itself
3.Press the key to exit the menu putting changes into effect or the
Arrow key to leave the menu going one step back.
Manual: You must specify the path to the NTP server.
2.Press the key to exit the menu putting changes into effect or the
Arrow key to leave the menu going one step back.
Further details are shown on the next page.
Language settings options
SETTINGS
Layout
Call settings
HOME
CallDate and time
Sounds and alerts
Meetings
Wallpaper: Growing
Presentation
System information
Camera control
Administrator settings
Restart
Settings
Date and time settings overview
English
Main source: Camera
Language: English
Chinese
SETTINGS
French
German
Layout
Italian
Main source: Camera
Japanese
Call settings
Korean
Language: English
CallDate and time
NTP mode: Auto
Sounds and alerts
Meetings
Norwegian
Portuguese
Spanish
Off
Auto
Manual
Camera control
Date format: Day, Month, Year
Advanced
Scroll with the and Arrow
keys to access languages not
shown.
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
DATE AND TIME
NTP server: 2.ntp.somewhere.cu.no
Wallpaper: Growing
Presentation
Time information
zone: GMT–12:00 (International
System
Russian
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
HOME
Settings
Restart
Time format: 24 hours
17
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Setting date and time yourself
Setting date and time automatically
You may specify date and time zone settings along with date and time format and the
date and time of day itself.
You may have the date and time of day set automatically. If you set NTP server to
Auto, the system will take care of the connection to the NTP server itself.
Do as follows:
If you set it to Manual, you must specify the path to the NTP server.
1.Start from the Home menu and navigate down to Settings and press the
Then navigate to Date and time and press the key.
2.Use Arrow keys and the
key.
At any rate, you must still specify time and date formats as well as the time zone.
key to set everything as required.
Deactivated NTP server
Activated NTP server
Scroll with the
and Arrow keys
to access settings
not shown.
CALL SETTINGS
NTP server: Off
NTP server: 2.ntp.somewhere.cu.no
10
International Date Line West
GMT-11:00
Midway Island, Samoa
GMT-10:00
Hawaii
GMT-09:00
Day: 10
Month: September
TIME ZONES
GMT-12:00
Alaska
GMT-08:00
February
Pacific time
GMT-07:00
Arizona
DATE AND TIME
Year: 2010
Mountain Time
NTP server: Auto
2010
GMT-07:00
Chihuahua, La Paz, Mazattan
Time: 13:37
Date format: Day, Month, Year
GMT-07:00
13:37
Time format: 24 hours
NTP server: 2.ntp.somewhere.cu.no
GMT-06:00
Time zone: GMT–11:00 (Midway Island
GMT-06:00
Central America
Saskatchewan
GMT-06:00
Date format: Day, Month, Year
Guadalajara, Mexico City, Monterrey
Time format: 24 hours
Year.Month.Day (yyyy.mm.dd)
Year.Month.Day (yyyy.mm.dd)
Month.Day.Year (mm.dd.yyyy)
Month.Day.Year (mm.dd.yyyy)
The options shown here are
available when NTP server Off has
been chosen only.
Day.Month.Year (dd.mm.yyyy)
Day.Month.Year (dd.mm.yyyy)
24 hours
12 hours (am/pm)
24 hours
DATE AND TIME
12 hours (am/pm)
NTP server: Manual
2.ntp.somewhere.cu.no
NTP server: 2.ntp.somewhere.cu.no
Save
Time zone: GMT–11:00 (Midway Island
Cancel
Date format: Day, Month, Year
Setting NTP server to Manual
lets you specify the path to
the NTP server. Otherwise
nothing is different from the
Auto setting.
Time format: 24 hours
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
18
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Selecting ring tone
Setting ring tone volume
The system lets you choose between a multitude of ring tones.
The system lets you set the ring tone volume.
Do as follows:
Advanced settings
Do as follows:
1.Start from the Home menu and navigate down to Settings and press the
key.
1.Start from the Home menu and navigate down to Settings and press the
2.Then navigate to Sounds and alerts and press the key. Navigate to Ring tone and
press the key. Use the and Arrow keys to move among the ring tones. Each
ring tone will be played when you position the cursor at it.
2.Then navigate to Sounds and alerts and press the key. Navigate to Ring tone
volume and press the key. Use the and Arrow keys to set the volume.
3.Press the key to exit the menu putting changes into effect or the
Arrow key to leave the menu going one step back.
3.Press the key to exit the menu putting changes into effect or the
Arrow key to leave the menu going one step back.
Ring tone selection
Ring tone volume settings
SETTINGS
Layout
Layout
Main source: Camera
IceCrystals
Call settings
HOME
CallDate and time
Sounds and alerts
Meetings
Wallpaper: Growing SOUNDS AND ALERTS
Presentation
Ring tone: Marbles
System information
Camera
control
Ring
tone volume: 40
Advanced
Key tone: On
Restart
Settings
SETTINGS
Marbles
Main source: Camera
Language: English
key.
Call settings
Polaris
Language: English
Alert
CallDate and time
Discreet
Sounds and alerts
Meetings
Fantasy
Wallpaper: Growing SOUNDS AND ALERTS
Presentation
Ring tone: Marbles
System information
Jazz
Nordic
Ring
tone volume: 40
Camera
control
Advanced
Echo
Key tone: On
Restart
Settings
Rhythmic
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
HOME
19
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Setting key tone to on or off
Setting wallpaper on your screen
The system may be set to emit a sound when you press a key on the remote control
inside the dialing dialog menu.
The system lets you set a wall paper on your screen. This is shown in idle condition
only.
Do as follows:
Do as follows:
1.Start from the Home menu and navigate down to Settings and press the
key.
1.Start from the Home menu and navigate down to Settings and press the
key.
2.Then navigate to Sounds and alerts and press the key. Navigate to Key tone and
press the key. Use the and Arrow keys to select.
2.Then navigate to Wallpaper and press the key. Use the and Arrow keys to
select wall paper. Uploading and inserting a custom wallpaper is explained overleaf.
3.Press the key to exit the menu putting changes into effect or the Arrow key to
leave the menu going one step back.
3.Press the key to exit the menu putting changes into effect or the Arrow key to
leave the menu going one step back.
Keytone setting
Wallpaper setting options
SETTINGS
SETTINGS
Layout
Layout
Main source: Camera
Main source: Camera
Call settings
Call settings
Language: English
Language: English
Date and time
HOME
CallDate and time
Sounds and alerts
Call
Sounds and alerts
Meetings
Wallpaper: Growing SOUNDS AND ALERTS
Presentation
Ring tone: Marbles
System information
Wallpaper: Growing
Presentation
System information
Camera
control
Ring
tone volume: 40
Advanced
Key tone: On
Settings
Restart
HOME
None
Growing
On
Camera
control settings
Administrator
Summersky
Off
Restart
Settings
Custom
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
20
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Inserting your own wallpaper
System information
The system lets you upload and use your own wallpaper (for example your logo) on
your screen. This custom wallpaper picture can be any size up to 1920×1200 pixels.
System information can be listed.
Advanced settings
Do as follows:
The custom wallpaper is uploaded by means of the system’s web interface. See the
Appendices section of the Administrator Guide for your system for further details
about the web interface.
1.Start from the Home menu and navigate down to Settings and press the
2.Then navigate to System information and press the
3.To exit this screen, press the Home key (
Do as follows:
key.
key again.
).
1.Open a web browser and enter the IP address of the codec/endpoint of your
system.
2.Select Wallpaper from the menu bar on the left side of the screen.
3.Browse for the file and click the Upload button.
4.Close the web browser.
5.Select Custom wallpaper (see the previous page) to put the change into effect.
A shortcut to this function is available. Make sure the system displays the Home
menu (press the key on the remote control to display this menu). Then press the
rightmost softbutton to display the System information.
Note that access to the system’s web interface may have been password protected
by your administrator.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
21
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting
Getting started
started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Entering the Advanced configuration
Restarting the system
Your video system has a separate set of Advanced configuration settings intended
to be used by system administrators only. These settings may be protected by a
password.
Some changes in the system settings, network settings and the infrastructure
configurations may call for a system restart.
Do as follows:
Aspects of the Administrator settings are discussed in more detail in the section
“Advanced settings” on page 44.
1.Start from the Home menu and navigate down to Settings and press the
2.Then navigate to Restart and press the
A full presentation of the Administrator settings can be found in the Administrator
Guide for your system, available separately for download from Cisco.com.
Restarting
SETTINGS
SETTINGS
SETTINGS
Layout
Layout
Layout
Main source: Camera
Main source: Camera
Main source: Camera
Call settings
Language: English
Call settings
Call settings
HOME
Language: English
HOME
Language: English
CallDate and time
CallDate and time
CallDate and time
Sounds and alerts
Meetings
PASSWORD
Sounds ADMINISTRATOR
and alerts
Meetings
Please enter your
Wallpaper: Growing
Administrator password:
Presentation
System
*** information
Sounds and alerts
Meetings
Wallpaper: Growing
Presentation
System information
Camera
control settings
Administrator
Restart
Settings
key to make your selection.
3.Use Arrow keys and the
Advanced configuration entering
key.
key.
HOME
Wallpaper: Growing
Presentation
System information
Camera
control
Advanced
OK
Restart
Settings
Cancel
Camera
control settings
Administrator
Restart
Settings
Restart
Do you really want to restart the system?
Restart
Cancel
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
22
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Making
calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Chapter 2
Making calls
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
23
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Making
calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Placing calls by specifying the name, number or address
HOME
HOME CALL
HOME CALL
Call
Enter
Call
contact...
Enter
Call
123
Meetings
Camera control
Settings
Presentation
Phone book
Presentation
Presentation
Phone book
Presentation
Camera
Recent
Cameracontrol
control calls
Camera
Recent
Cameracontrol
control calls
Settings Add another participant
Settings
Settings Add another participant
Settings
abc / 123
Press the key to display
the Main menu.
Turn keyboard on
Press as outlined to invoke
the virtual keyboard.
Use the Arrow key, as shown, to
move the cursor up into the virtual
keyboard (indicated by an orange
square).
HOME
HOME
HOME
CALL
Call
a
Meetings
Call a
abc
CALL
abc
Meetings
alice.wonderland@everywhere.co.nl
norah.dollhouse@somecompany.com
Presentation
My contacts
My contacts
Dorian Grey
Hedda Gabler
Dorian
Grey
Camera
control
Camera control
Hedda Gabler
Matches will appear as you write.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
MeetingsCall
Phone book
Presentation
Recent calls
Camera control
Settings Add another participant
Settings
Floria Tosca
Floria Tosca
Access special characters and numerics by
means of the corresponding keys.
Hedda Gabler
Call
Phone book
Phone book
Use the Arrow keys to move about the
keyboard and the key to select a character.
CALL
Recent calls
Recent calls
alice.wonderland@everywhere.co.nl
norah.dollhouse@somecompany.com
Presentation
Settings
123
Call
MeetingsCall
Call
MeetingsCall
Presentation
contact...
Press the Arrow key a sufficient
number of times to exit the keyboard
and enter the list of matches (if such
a list appears). Then use the Arrow
keys to navigate to the one to call and
press the key.
24
or the key to
Press
actually place the call.
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Making
calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Placing calls using the phone book
PHONE BOOK
PHONE BOOK
Search
PHONE BOOK
Search
Search
a
My contacts
My contacts
Abraham Anderson
0.1 - Beijing Office
0.1 - Beijing Office
Adrian Jones
0.2 - London Office
0.2 - London Office
Harry P. Otter
0.3 - New York Office
0.3 - New York Office
Hedda Gabler
0.4 - Oslo Office
0.4 - Oslo Office
Norah Dollhouse
0.5 - San Jose Office
0.5 - San Jose Office
Peer A. Gynt
0.5 - Washington Office
0.5 - Washington Office
Roberta Nielsen
Press the key to display the Phone book.
This will also invoke the virtual keyboard.
Your phone book may contain folders, as
outlined.
Use the Arrow key, as shown, to
move the cursor up into the virtual
keyboard (indicated by an orange
square).
Any search you make will include current
folder and any subfolders, so if you stay at
the top level (sometimes referred to as the
root level), your search will be made within
all (sub)folders.
Access special characters
and numerics by means of the
corresponding keys.
Matches will appear as you write,
as outlined.
PHONE BOOK
Search
Use the Arrow keys to move about
the keyboard and the key to
select a character.
Harry P. Otter
harry.p.otter@somecompany.com
a
Abraham Anderson
Call
Adrian Jones
Harry P. Otter
Edit before call
Hedda Gabler
Norah Dollhouse
Save to my contacts
Peer A. Gynt
Add to participants list
Roberta Nielsen
View dialing method
Exit the virtual keyboard as explained on the
previous page.
Call the entry selected (press
or the
key).
Edit the entry (for example insert a prefix)
and then call.
Save the entry to your
personal list of contacts.
Add to list of participants in a multisite call
(optional feature).
View dialing method options
(H.323 and SIP wherever applicable).
Navigate to the entry to be called and press
the key or the Arrow key to produce the
options available.
More about the phone book can be found in the section “Phone book usage”—click on the topic on the menu line at the top of this page.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
25
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Making
calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Placing calls by means of the Recent calls list
RECENT CALLS
CALL
HOME
harry.p.otter@somecompany.com
Received 20.06.11 16.29
hedda.gabler@somecompany.org
Call
Placed 20.06.11 15.10
dorian.grey@myself.net
Meetings
Missed 20.06.11 14.55
Call
frodo,b.aggins@myshire.org
Received 20.06.11 12.20
Presentation
Phone book
Camera control
Recent calls
Settings
Add another participant
Press the key to display
the Main menu.
Harry P. Otter
harry.p.otter@somecompany.com
Call
Edit before call
Save to my contacts
Add to participants list
View dialing method
floria.tosca@somecompany.org
Placed 20.06.11 08.17
Navigate down to Recent calls
and then press the key.
Call the entry selected (press
or the
Use the Arrow keys to navigate in
the list.
key).
Edit the entry (for example insert a prefix)
and then call.
Save the entry to your
personal list of contacts.
Add to list of participants in a multisite call
(optional feature).
View dialing method options
(H.323 and SIP wherever applicable).
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
26
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Making
calls
Phone book usage
When someone is calling you
In-call features
Scheduled meetings
Advanced settings
Management systems booking list
If your video network makes use of the Cisco Telepresence Management System
(TMS), your video system may be set up for scheduled meetings from remote.
Typically, the TMS works with tools like Microsoft Outlook, permitting employees to
book and schedule video calls and conferences.
Press the
key on the
remote control to
reject an incoming
call.
Press the
key
on the remote
control to answer
an incoming call.
Any bookings applicable to your system will appear on the screen as shown in the
below example.
john.doe@videocompany.co.nla
Sept
20
TODAY’S BOOKINGS
NOW - 14:30
Align weekly
14:30 - 15:00
Sales meeting planning
15:00 - 15:30
Release planning
Terminating an ongoing call
Press the
key on the remote
control to terminate an ongoing
call.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
27
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Making
calls
Phone book usage
Calling more than one (optional)
In-call features
Scheduled meetings
Advanced settings
Calling participants one by one
CALL
HOME
Provided that your video endpoint is equipped with the optional built-in Multisite
feature, any point-to-point video call (a call involving two parties only) may be
expanded to include additional participants. The call will then become a video
conference.
alice.wonderland@mycompany.com
Enter contact...
Call
During a call, open the Call menu again…
MeetingsCall
Phone book
Presentation
Any ongoing video call can then be expanded to a video conference by adding more
participants at all times (see the right example).
Recent calls
Camera control
This is the
participant
you already
are in a call
with.
Settings Add another participant
Alternatively, you may set up a list of whom to call before you actually call them and
then call them all in one go (see the below example).
CALL
HOME
alice.wonderland@mycompany.com
Note that your video network may have an infrastructure permitting video conferencing—
even if your video system itself does not. This will require the presence of an external
Multipoint Control Unit (MCU).
Then call someone in the usual manner—
by keying in the name, number or address
(in this case “542”) or by means of the
phone book. Invoke the virtual keyboard
(see “Entering text in text fields” on
page 7), if convenient.
The most advanced video systems (those using Codec C60 or C90) can—when
equipped with Multisite—set up video meetings with four participants (yourself
included). External MCUs may let you set up conferences with many more
participants.
page 30 to
Systems equipped with Codec C20 have no Multisite feature (see
find out which type of codec your system has). However, all products described in this
user guide come with Multiway™ installed (see the next page for more on this).
542
Call
123
MeetingsCall
Phone book
Presentation
Recent calls
Camera control
The next
participant
you are
going to
call.
Settings Add another participant
CALL
HOME
alice.wonderland@mycompany.com
Finally, navigate down to
place the call…
Contact your system administrator for details on how to use external MCUs.
Call542
Call and
Meetings Call
If you want to add another participant,
repeat the process. The maximum
number of participants possible
depends on your system’s configuration.
Setting up a list of whom to call before calling them
This example shows two entries made before any
calls are placed.
To do this start by entering the first person to call
(directly, via the recent calls list or from the phone
book), then select Add another participant and add
a second person. When all have been entered,
press Call on the remote control or select the Call
icon in the menu.
123
Phone book
Presentation
Recent calls
Camera control
Use this
to place
the call.
Settings Add another participant
Terminating a video conference
HOME CALL
alice.wonderland@mycompany.com
Call
john.doe
abc
The host of a video conference is the
one who initiated the conference. This
is the endpoint to which all the others
are connected.
Meetings
Call
For units equipped with MultiSite capabilities, up to
three participants can be called simultaneously, if
no external MCUs are used.
Presentation
Phone book
After you have entered the participants, press
the
key to place the calls. Any of these may,
of course, be fetched from the phone book in the
usual manner.
Settings Add another participant
The host has the right to terminate the
connection to any of the participants.
The participants cannot control any
of the others, but may disconnect
themselves from the meeting at all
times.
Camera control
Recent calls
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
28
End call
Do you really want to disconnect this call?
Disconnect all
Disconnect alice.wonderland@mycompany.com
Disconnect 542
Cancel
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Making
calls
Phone book usage
Using Multiway™ to call more than one
In-call features
Scheduled meetings
Advanced settings
Using Multiway, Case 2
Someone calls you while you are in a call. You will need to decide whether the calling party
shall be invited to join the current call or not.
All systems described in this User guide offer Multiway as a means to call more
than one. Note that successful use of Multiway requires the presence of certain
infrastructure products. If in doubt check with your system administrator.
Someone calls you while you are in a call. A dialog box giving you three options will be
shown.
Incoming call
norah.dollhouse@somecompany.com
550092
Accept (put current call on hold)
Using Multiway, Case 1
Accept (disconnect current call)
Reject
Assume that you already are in a call and that you would like to expand the call to include
someone else.
Select Accept (put current call on hold).
Do as follows:
When you are ready to create the conference, select Join Calls.
Start calling someone else by pressing the
or the
key on the remote control.
HOME
Call
CALL
Meetings
abc
Recent calls
alice.wonderland@everywhere.co.nl
Presentation
norah.dollhouse@somecompany.com
My contacts
Dorian
Grey
Camera
control
Hedda Gabler
Settings
Floria Tosca
Phone book
Call on hold
Your call with
james.dowe@somecompany.com
is on hold.
Enter the number or URI of the person to be included, either directly or by means of the
phone book or the list displayed) and place the call by pressing the key. This will put
the current call on Hold. When the new participant replies, select Join Calls.
Resume
Join calls
Hold
All three of you will now be in the same meeting.
Case 2 options: If you do not want to set up a Multiway conference, you have the following
choices in 2. above:
• If you want to accept the incoming call instead of the current call, select Accept
(disconnect current call).
• If you do not want to respond to the incoming call, select Reject.
Call on hold
Your call with
james.dowe@somecompany.com
is on hold.
Resume
Join calls
Hold
The maximum number of participants in a Multiway call is limited by the capabilities of the
infrastructure of your network only. The two cases described on this page may be combined
as much as you want.
All three of you will now be in the same meeting.
Repeat to include more participants if needed.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
29
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Making
calls
Phone book usage
In-call features
Scheduled meetings
Advanced settings
Which codec does my system have?
The optional ability to call more than one participant—the MultiSite feature— does
not apply to all video endpoints. This depends on the type of codec your system is
equipped with. The following applies:
At any rate, MultiSite is an optional feature that may—or may not—be present in your
endpoint.
If you need to see which type of codec your system is equipped with, open the
bottom module lid of the system.
• Endpoints using Codec C40, C60 and C90 support MultiSite and MultiWay.
• Endpoints using Codec C20 do not support MultiSite, but MultiWay.
• Quick Set C20 / C20 Plus both use the Codec C20. Consequently, they do not
support MultiSite, but MultiWay.
Looking for codec type:
Profile series codecs:
Codec C90
Open the bottom module lid as
shown, to see which type of
codec you have.
Codec C60
Codec C40
Codec C20
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
30
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone
Phone book
book usage
usage
In-call features
Scheduled meetings
Advanced settings
Chapter 3
Phone book usage
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
31
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone
Phone book
book usage
usage
Basic phone book features
In-call features
Scheduled meetings
Advanced settings
Opening the phone book
Your video system contains a phone book. The phone book is organized in a way very
similar to what you find in a mobile phone.
It contains a section where you can add your own list of contacts, and most corporate
solutions will also include a corporate phone list.
This corporate phone list is normally installed and maintained from remote by your
system administrator through a management system like the Cisco Telepresence
Management Suite (TMS), which is available separately.
Press the
key…
You cannot edit the corporate list yourself, but you may add entries to My Contacts.
These may be edited as much as you want.
... the Phone book menu will now open…
Navigating in the phone book
Navigate in the phone book with the
Arrow and keys.
The phone book may contain folders
indicated by folder icons ( ). Press
the Arrow key to display the
contents of a folder. Repeat, if needed,
if there are more folder levels.
Whenever you are at a lower level, use
the Arrow key to move one level
back.
PHONE BOOK
Folders contain
phone book
entries (and they
may even contain
subfolders).
PHONE BOOK
Search
My contacts
0.1 - Beijing Office
0.2 - London Office
Search
My contacts
0.1 - Beijing Office
0.2 - London Office
0.3 - New York Office
0.3 - New York Office
0.4 - Oslo Office
0.5 - San Jose Office
0.4 - Oslo Office
0.5 - Washington Office
0.5 - San Jose Office
0.5 - Washington Office
Searching for an entry is explained on
the next page.
The phone book typically contains your own My contacts and a corporate phone book.
You may create your own list of contacts in My contacts.
Calling an entry in the phone book
CALL
The phone book can
also be accessed
from the Call menu.
PHONE BOOK
When an entry is located, just press
key to place the call.
the
Search
a
Abraham Anderson
Adrian Jones
Phone book
Harry P. Otter
Hedda Gabler
Recent calls
Norah Dollhouse
Peer A. Gynt
Add another participant
Roberta Nielsen
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
Call
32
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone
Phone book
book usage
usage
Searching in the phone book
In-call features
Scheduled meetings
Advanced settings
How to search for an entry
The My contacts may contain up to 200 entries, but the entire phone book can be
virtually unlimited in size. Consequently, using the arrow keys as the only navigation
device can easily mean a lot of work. What to do?
PHONE BOOK
Press the
key to display
the Phone book. This will also
invoke the virtual keyboard.
Search
Enter the search function. By means of a virtual keyboard the search procedure is a
simple and convenient way of locating an entry.
My contacts
0.1 - Beijing Office
0.2 - London Office
Your phone book may contain folders, as outlined. Searches made will include current
folder and any subfolders, so if you stay at the top level (sometimes referred to as the
root level), your search will be made within all the (sub)folders.
0.3 - New York Office
0.4 - Oslo Office
0.5 - San Jose Office
0.5 - Washington Office
PHONE BOOK
Search
My contacts
0.1 - Beijing Office
0.2 - London Office
0.3 - New York Office
0.4 - Oslo Office
Use the
Arrow key as
shown to move the cursor
up into the virtual keyboard
(indicated by an orange
square).
0.5 - San Jose Office
0.5 - Washington Office
PHONE BOOK
Search
a
Abraham Anderson
Adrian Jones
Harry P. Otter
Hedda Gabler
Norah Dollhouse
Peer A. Gynt
Roberta Nielsen
Use the Arrow keys to move
about the keyboard and the
key to select a character.
Access special characters
and numerics by means of the
corresponding keys.
Matches will appear as you
write, as outlined.
How to call the selected
entry is shown in the section
“Making calls”.
Add more letters to narrow and refine your search.
Example: Keying in da, will return entries like Dave Olson and David Jones, but also John
Dahl and Vittorio Dalmazzino. There is no case sensitivity.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
33
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone
Phone book
book usage
usage
Adding new contacts to the phone book
In-call features
Scheduled meetings
Advanced settings
Adding an entry manually to My contacts
Open the phone book by pressing the
navigate to My contacts:
New contacts can be added to My contacts only. Other entries must be entered by
your system administrator.
key on the remote control and
PHONE BOOK
Search
My contacts
0.1 - Beijing Office
0.2 - London Office
0.3 - New York Office
Adding an entry from recent calls or the phone book
0.4 - Oslo Office
0.5 - San Jose Office
0.5 - Washington Office
While you are inside the phone book or inside the list of recent calls, navigate to the entry
you would like to copy to My contacts and press the key or the Arrow key to show the
Options menu:
RECENT CALLS
harry.p.otter@somecompany.com
Press the
MY CONTACTS
Harry P. Otter
harry.p.otter@somecompany.com
Search My contacts
Received 20.06.11 16.29
hedda.gabler@somecompany.org
Placed 20.06.11 15.10
dorian.grey@myself.net
Missed 20.06.11 14.55
frodo,b.aggins@myshire.org
Received 20.06.11 12.20
floria.tosca@somecompany.org
Placed 20.06.11 08.17
key to show the contents of My contacts:
abc
Call
Edit before call
Add new contact
Save to my contacts
10.47.148.797
Add to participants list
Adrian Jones
View dialing method
Alice Wonderland
Hedda Gabler
Norah Dollhouse
Navigate to Add new contact and press the
SAVE TO MY CONTACTS
Name
Harry P. Otter
NEW CONTACT
abc
Number / URI H323:harry.p.otter
Shown
ghosted
because
nothing
has been
entered yet.
Save
Cancel
Navigate down to Save to my contacts and press the
you to edit the entry, if needed.
key to open the dialog box that allows
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
Name
Abc
Number / URI
Save
Cancel
Enter name and number or address (URI) of the new contact. After you have entered
this information, the Save field will no longer appear ghosted and you may navigate
down to this field and press the key to save your new entry.
This is similar to entering a new contact manually (see right for details), but in this case the
name and number or address (URI) of the copied contact has already been filled in for you
by the system. If you want to edit the information entered, you may do so. Remember to save
before leaving the menu.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
key:
Alternatively, navigate down to Cancel and press the
without saving the new entry.
34
key to exit the dialog box
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone
Phone book
book usage
usage
In-call features
Scheduled meetings
Advanced settings
Editing existing entries in the phone book
You may edit and delete entries in My contacts any time. Since updates in the
corporate phone book(s) made by your system administrator will fail to affect My
contacts, you may have to use this feature from time to time if corporate phone book
changes are made.
Editing entries in the phone book
PHONE BOOK
MY CONTACTS
Search
Search My contacts
My contacts
abc
Add new contact
0.1 - Beijing Office
10.47.148.797
0.2 - London Office
Adrian Jones
0.3 - New York Office
Alice Wonderland
0.4 - Oslo Office
Hedda Gabler
0.5 - San Jose Office
Norah Dollhouse
0.5 - Washington Office
Navigate to the entry to be edited
and press the key.
Open the phone book by pressing the
key
and then navigate to My contacts. Press the
key to open My contacts.
You may call the entry directly.
hedda.gabler@somecompany.com
hedda.gabler@somecompany.com
Call
Edit before call
Add to participant list
View dialing methods
Remove from list
Edit contact details
You may edit the number or URI.
You may add the entry to participants list when setting up a
conference.
If the entry is listed with more dialing methods than the default, you
may use this to, for example use H.323 instead default SIP (or the
other way around).
EDIT CONTACTS
You may remove the entry from the list.
Name
You may edit contact details.
Number / URI hedda.gabler@some
Hedda Gabler
abc
Save
Cancel
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
35
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
features
In-call
Scheduled meetings
Advanced settings
Chapter 4
In-call features
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
36
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
Sharing contents
In-call features
features
In-call
Scheduled meetings
Advanced settings
Sharing PC contents
Make sure the PC does not cover your line of sight to any of the microphones.
This will reduce the perceived audio quality at the far end.
General recommendations tips for making your video meeting room as good as
possible are described in the Administrator guide for this product. The Administrator
guide may be downloaded from www.cisco.com/go/telepresence/docs.
Locate the DVI cable and connect the PC to the video system.
Connect the audio mini-jack output from the PC, or any other
source—including Ipod—to the mini-jack socket of the cable to
get sound. Connect the RCA connectors to the corresponding
sockets on the codec/endpoint.
Dual video stream
With dual video stream you can view two different live video streams simultaneously—
the main video and one additional source. This could for example be both a PC
presentation and the person who gives the presentation.
The default presentation source will be activated when you press
the Presentation button ( ) on the remote control, as outlined.
If a video system does not support dual video stream, no second video stream will be
established for this system and the PC presentation will be shown as the main video.
The DVI / VGA input is compliant with VESA Extended Display
Identification Data (EDID) and will be able to notify the PC of the
supported output formats.
If the shared contents fail to show
• Normally you must press a special key combination to switch the PC image from the PC
screen to the video screen.
• Check that the presentation source is correctly defined. Access to this setting may be
password protected by your system administrator. The procedure is described in the
Administrator guide for this product.
• Make sure your PC is set to activate your VGA output.
Selecting the source
To specify which source to serve as presentation source select it as shown here. Note that
the name of each source can be changed, consult your administrator for details on this. All
options shown are not available to all systems.
HOME
Meetings
Secondary camera (no signal)
Meetings
PC
Camera control
Settings
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
37
PRESENTATION
Call
Presentation
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
HOME
Call
Presentation
DVD
Document camera
Camera control
Settings
No presentation
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
features
In-call
Scheduled meetings
Advanced settings
Controlling the cameras
During a call, you may control where your own camera is pointing (i.e. pan and tilt)
and the zoom. However, far end systems with remotely controllable cameras may
also permit you to control their camera’s panning and zooming. This is called Far end
camera control.
For video conferences with more than two participants, far end is an ambiguous term.
If you are the initiator of a conference the only far end camera controllable by you will
be the first participant you called. The other participants may all control your camera,
but they cannot control each other.
Controlling your own camera (near side)
Controlling far end camera (far side)
In a call use the Arrow keys of the remote control to enter the camera
control mode. Softbuttons will now appear as shown below.
In a call use the Arrow keys of the remote control to enter the camera
control mode. Softbuttons will now appear as shown below.
Use the Arrow keys and the Zoom keys to pan, tilt and zoom your
camera.
Proceed as for near end camera control.
Press the leftmost Function key to access the far end camera.
Exit the mode when finished.
Access to far
end camera (if
far end camera
is remotely
controllable).
Access to your
own camera
presets, if
defined.
Access to your
own camera’s
settings.
Access to your
own system’s
main source
setting.
Exit this
mode.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
Back to near end
camera control.
38
Exit this
mode.
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
meetings
Scheduled
Advanced settings
Chapter 5
Scheduled meetings
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
39
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
meetings
Scheduled
Advanced settings
Joining a meeting
Learning more about a meeting
Your system may be connected to a management system capable of scheduling
meetings for your video systems. Any meetings scheduled will then appear in the Table of
Meetings as outlined below. You cannot navigate in that table with the remote control. To
produce a list in which you can navigate with the remote control, see
“Displaying a list
of upcoming meetings” on the next page.
You may use the Reminder to learn more about the announced meeting—just navigate
down to Meeting details and expand the item.
Meeting details will typically include who the organizer is; whether the meeting will be
recorded or not; a description of the meeting; whether it may be extended, if needed
“Extending a scheduled meeting” on page 43 for more on this); dial in
(see
information etc.
The Table of Meetings contains 14 days of scheduled meetings. The list is sorted
using Grouping headers. The main grouping category is by day (e.g.: TODAY,
TOMORROW, then WEDNESDAY, July 20, 2011 etc).
Observe that when a scheduled meeting appears as Private meeting it will contain
information about the organizer only. There will be no title, no expandable meeting
outline nor will there be any dial-in information.
On your video system the Meeting Reminder will appear once it is possible to join a
meeting. Exactly when that will be depends on the Start time buffer setting, which
has been set by your system administrator. Default buffer setting is 10 minutes.
See
the next page for an example of how the Meeting details are presented.
The meeting reminder contains a time indicator stating when the meeting starts, or
alternatively for how long the meeting has been going on (an ongoing meeting is
referred to as a Meeting in progress).
The text Starting now will be shown during a time interval spanning from 30 seconds
before to 30 seconds after the scheduled start time of the meeting.
To join a meeting or not
Viewing meeting details
• Select the Join meeting and press OK. This connects you to the “dial in“ address. .
• In the Reminder navigate down to Meeting details and expand this menu item to see
meeting details. An example of Meeting details is shown on the next page.
• Select Snooze and press OK to temporarily hide the Reminder for 5 minutes..
• Select Dismiss and press OK to close the Reminder.
Example of
Table of
Meetings
Example of
Meeting Reminder
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
40
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
meetings
Scheduled
Advanced settings
Displaying a list of upcoming meetings
Meeting details of any upcoming meeting
If you want to take a closer look on any of the upcoming meetings including your video
system, you will need to look in a List of Meetings that lets you navigate in it with the
remote control.
Once you have selected one of the upcoming meetings in the list, you may look into
the details of that meeting.
Even from this menu you may join the meeting, provided that you are inside the time
window allowing you to join. The length of this time window depends on the Start
the previous page for more
time buffer defined by your system administrator. See
on this.
Otherwise this list is identical to the table of upcoming meetings, as can be seen below.
An upcoming meeting will be shown in the Meeting Reminder, which pops up by itself
the previous page for more on this.
on the screen, see
To display a meetings list you can navigate within
Viewing details of any meeting
• In the Home menu, navigate down Meetings and expand the item to produce a List of
Meetings.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
1.Navigate to the meeting to be looked into and expand the menu item.
2.Then navigate down to Meeting details and expand this menu item to see meeting details.
41
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
meetings
Scheduled
Advanced settings
Joining when already in a call
Parallel meetings (concurrency)
If you already are in a call (a video meeting), the Join meeting field will change to reflect
the new situation.
When Parallel meetings occur (two or more meetings taking place simultaneously), an
alert will appear, as outlined.
Selecting View meetings followed by pressing OK will produce the List of Meetings,
with the parallel meetings shown at the top of the list as outlined below.
Selecting which meeting to join
Joining the meeting
• If you already are in a call, the Join meeting button will change to JOIN & END CURRENT.
1.Expand View meetings as outlined.
• Select JOIN & END CURRENT button to join the new meeting, ending the current.
2.Then navigate down to the meeting you want to join and join in the usual way.
• Select Join & Hold Current to temporarily join the meeting.
• Select Snooze to temporarily hide the Reminder for 5 minutes.
• Select Dismiss to go on with your current meeting.
• You can always look into the meeting details to help you make up your mind, select
Meeting details for this.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
42
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
meetings
Scheduled
Advanced settings
Extending a scheduled meeting
Scheduled meetings have a fixed start and end time. When you are in a scheduled
meeting, a Meeting will end notification appears 10 minutes, 5 minutes and 2 minutes
before the meeting is brought to an end by the management system.
You may want to extend an ongoing meeting. This will be accepted by the system
provided that no other meeting is scheduled on the video system during the period of
extension.
Extending the meeting
• If an extension is sustainable, the Meeting will end notification will include an Extend and
a Dismiss option.
• To extend a meeting, make sure the Extend field is selected, as outlined, and then press
OK.
• If you do not want to extend the meeting, navigate to Dismiss and press OK.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
43
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced
Advanced settings
settings
Chapter 6
Advanced settings
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
44
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
About the Administrator settings
In-call features
Scheduled meetings
Advanced
Advanced settings
settings
Administrator settings & password
The Advanced configuration settings are aimed at system administrators only and may
have been password protected by your system administrator. Unless you are the system
administrator you should normally leave these settings as they are.
The Administrator settings lets you define extra softbutton functions; change the IP
settings of the system; use the advanced configuration options and change the menu
access password.
The IP settings (not shown) are also aimed at system administrators.
The Advanced configuration settings and the IP settings are described in the Administrator
Guide applying to your video system. This guide can be downloaded from www.cisco.com/
go/telepresence/docs.
Your video system can be configured through its web interface, but it may also be
configured through the Advanced configuration. This is all normally done by your
system administrator, who may have password protected the access to the Advanced
configuration.
The password may not have been set. If you decide to give your system a password, take
care. If you forget your password contact your Cisco representative for help.
Entering the Administrator settings
SETTINGS
SETTINGS
HOME
Layout
Layout
Main source: Camera
Main source: Camera
Meetings
Call settings
Call settings
Presentation
Language: English
Call
Camera control
Settings
Starting from the Home menu,
navigate down to Settings and
press the key.
HOME
CallDate and time
Sounds and alerts
Meetings
Wallpaper: Growing
Presentation
System information
Camera
control settings
Administrator
Restart
Settings
Then navigate to Administrator settings
and press the key again to display the
options available.
Language: English
HOME
CallDate and time
PASSWORD
SoundsADMINISTRATOR
and alerts
Meetings
Please enter your
Wallpaper: Growing
Administrator password:
Presentation
System
*** information
Camera
control
Advanced
OK
Restart
Settings
Cancel
Enter the password. Invoke the virtual keyboard, if
needed (see “Placing calls by specifying the name,
number or address” on page 24 for details on this).
Navigate to OK to enter the Administrator settings menu.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
45
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced
Advanced settings
settings
Assigning softbutton functions
The Function keys of the system’s remote control are used to control the softbuttons
appearing along the lower end of the screen—see also
”Navigating in the menus”
on page 6 for more.
The softbuttons are context sensitive, which means that they appear only when
needed and not else. You may enhance your system’s perceived performance by
assigning your own functionalities to the softbuttons.
Assigning a function to a softbutton
If you want a softbutton assignment to apply
to both idle and in-call situations, you must
assign a function twice.
SETTINGS
SETTINGS
Layout
Layout
Main source: Camera
Main source: Camera
Call settings
Call settings
Language: English ADMINISTRATOR
SETTINGS
HOME
Language: English ADMINISTRATOR
SETTINGS
HOME
Date
and time
Programmable
softbuttons
Date
and time
Programmable
softbuttons
Call
Call
Sounds
alerts
Audio and
input
levels
Sounds
alerts
Audio and
input
levels
Meetings
Meetings
Presentation
Presentation
Camera
Advanced
Setcontrol
menu password
Camera
control configuration
Advanced
Advanced
Restart
Pairing
Settings
Restart
Change password
Settings
System
information
IP settings
SYSTEM MODE
System
information
IP settings
In idle
In call
Advanced configuration
Navigate to Programmable softbuttons, as outlined, and
press the key. Se also the previous page, if needed.
Navigate to select whether the softbutton function shall
apply to idle or to in-call conditions. Press the key.
Layout
Main source: Camera
Main source: Camera
Call settings
Call settings
Language: English ADMINISTRATOR
SETTINGS
HOME
Language: English ADMINISTRATOR
SETTINGS
HOME
Call
However, doing so may appear more logical in
many cases.
SETTINGS
SETTINGS
Layout
Date
and time
Programmable
softbuttons
Note that any softbutton may be assigned to
any of the functions available.
Consequently, setting one softbutton to a
specific function for idle situations does
not require that the same function must be
assigned to the same softbutton for in-call
situations.
Wallpaper:
Growing
Connect to
Callway
Wallpaper:
Growing
Connect to
Cisco Callway
There must be one setting for idle and
another one for in-call mode.
Date
and time
Programmable
softbuttons
IN CALL
Call
Sounds
alerts
Audio and
input
levels
Softbutton 1: Not set
Wallpaper:
Growing
Connect to
Callway
Softbutton 2: Not set
Presentation
System
information
IP settings
Main source
Softbutton
3: MODE
Notselection
set
SYSTEM
Camera
control configuration
Advanced
Advanced
Camera preset
In idle Softbutton 4: Not set
Restart
Change password
Settings
Speed dials
In call Softbutton 5: Not set
Sounds
alerts
Audio and
input
levels
Softbutton 1: Not set
Wallpaper:
Growing
Connect to
Callway
Softbutton 2: Not set
Presentation
System
information
IP settings
Softbutton
3: MODE
Not set
SYSTEM
Camera
control configuration
Advanced
Advanced
In idle Softbutton 4: Not set
Restart
Change password
Settings
In call Softbutton 5: Not set
Meetings
Meetings
Navigate to select which softbutton to assign a function
to. Press the key.
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
SOFTBUTTON 1
Select among the options available and press the
key. The
options are presented in detail on the following pages.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
46
!
IN CALL
The description presented on this page
assumes that you are already inside the
Administrator settings, as described on the
previous page.
The access to the Administrator settings
may have been password protected by your
system administrator. Contact your system
administrator, if in doubt.
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced
Advanced settings
settings
Creating softbutton for Main source selection
Creating softbutton for Camera Preset
If you want direct access (via the softbuttons along the bottom line of the screen) to
the source used, you should assign the function Main source selection to one of the
softbuttons. Below we use Softbutton 1 as an example, but the function may, of course,
be assigned to any of the five softbuttons.
If you want direct access (via the softbuttons along the bottom line of the screen) to
predefined camera presets, you should assign the function Camera preset to one or
more of the softbuttons.
Note that camera presets must have been defined before you start assigning presets
“Camera presets” on page 9 for more on
to any of the softbuttons—see
camera presets.
Below we use Softbutton 4 as an example, but the function may, of course, be
assigned to any of the five softbuttons
!
How to get to the menus shown below
left and below right is described on
the previous page.
If you have set Softbutton 1 to PC as main
source, you may want to set Softbutton 2 to
Camera (or the other way around) in order to
be able to conveniently switch between the
two.
Assigning Main source selection softbutton
Assigning Camera preset softbutton
SETTINGS
Layout
Main source: Camera
SETTINGS
Call settings
Layout
Language: English ADMINISTRATOR
SETTINGS
HOME
Date
and time
Programmable
softbuttons
Call
Sounds
alerts
Audio and
input
levels
Softbutton 1: Not set
Wallpaper:
Growing
Connect to
Callway
Softbutton 2: Not set
Presentation
System
information
IP settings
Main source
Softbutton
3: MODE
Notselection
set
SYSTEM
Camera
control configuration
Advanced
Advanced
Camera preset
In idle Softbutton 4: Not set
Restart
Change password
Settings
Speed dials
In call Softbutton 5: Not set
Main source: Camera
IN CALL
Call settings
Language: English ADMINISTRATOR
SETTINGS
HOME
Meetings
SOFTBUTTON 1
Date
and time
Programmable
softbuttons
Call
MAIN SOURCE SELECTION
Sounds
alerts
Audio and
input
levels
Softbutton 1: Not set
Meetings
Wallpaper:
Growing
Connect to
Callway
Softbutton 2: Not set
Main source selection
Presentation
System
information
IP settings
Softbutton
3: MODE
Not set
SYSTEM
Camera
preset
Camera
control
Advanced
Advanced configuration
4: Not set
In idle Softbutton
Speed dials
Restart
Change password
Settings
5: Not set
In call Softbutton
Clear softbutton
Camera
PC
The number of sources
available will depend on
your system.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
47
IN CALL
SOFTBUTTON 4
CAMERA PRESET SELECTION
Pos. 1
Zoom out
Whiteboard
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced
Advanced settings
settings
Softbutton—Speed dials
Customized softbuttons—how they appear
If you want direct access (via the softbuttons along the bottom line of the screen) to
contacts in the phone book, you should assign the function Speed dials to one or more
of the softbuttons.
The below illustration shows how the video system screen may look with five
customized softbuttons defined.
Note that assignments can be made to existing contacts only (My contacts as well as
the corporate phone book). To add a contact to your list of contacts, see page 34.
Below we use Softbutton 5 as an example, but the function may, of course, be
assigned to any of the five softbuttons.
!
How to get to the menu shown below is described two pages back.
Assigning Camera preset softbutton
Example of customized softbuttons
Sept
20
SETTINGS
Layout
PHONE BOOK
Main source: Camera
Call settings
Search
Language: English ADMINISTRATOR
SETTINGS
HOME
Date
and time
Programmable
softbuttons
Call
Sounds
alerts
Audio and
input
levels
Softbutton 1: Not set
Meetings
Wallpaper:
Growing
Connect to
Callway
Softbutton 2: Not set
Main source selection
Presentation
System
information
IP settings
Softbutton
3: MODE
Not set
SYSTEM
Camera
preset
Camera
control configuration
Advanced
Advanced
4: Not set
In idle Softbutton
Speed dials
Restart
Change password
Settings
5: Not set
In call Softbutton
Clear softbutton
IN CALL
My contacts
0.1 - Beijing Office
SOFTBUTTON 5
0.2 - London Office
0.3 - New York Office
0.4 - Oslo Office
0.5 - San Jose Office
0.5 - Washington Office
Camera
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
48
PC
Zoom in
Zoom out
Norah Dollhouse
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced
Advanced settings
settings
Softbutton—Clearing softbuttons
You may clear softbuttons that you no longer want to appear. This is done via the
Clear softbutton at the bottom of the menu. You do not have to clear a softbutton
function before assign the same softbutton to another function. That may be done
right away.
For more on how to get to the below menu—see
on page 46 for details.
Make sure you select the right softbutton (idle mode or in-call mode).
“Assigning softbutton functions”
SETTINGS
Layout
Main source: Camera
Call settings
HOME
Language: English ADMINISTRATOR SETTINGS
and time
Programmable
softbuttons
CallDate
IN CALL
Sounds
alerts
Audio and
input
levels
Meetings
Softbutton 1: Not set
Wallpaper:
Growing
Connect to
Callway
Presentation Softbutton 2: Not set
System
information
IP settings
Main source
selection
Softbutton
3: Not
set
SYSTEM
MODE
Camera
control
Advanced
Advanced configuration
Camera
preset
In idle Softbutton 4: Not set
Restart
Change password
Settings
Speed dials
In call Softbutton 5: Not set
SOFTBUTTON 1
Clear softbutton
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
49
www.cisco.com
User guide
Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started
Making calls
Phone book usage
In-call features
Scheduled meetings
Advanced
Advanced settings
settings
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS
IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL
STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL
ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE
ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET
THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY
THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE
OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A
COPY.
The Cisco implementation of TCP header compression is an adaptation of a
program developed by the University of California, Berkeley (UCB) as part of
UCB’s public domain version of the UNIX operating system. All rights reserved.
Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT
FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH
ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION,
THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR
TRADE PRACTICE.
On our web site you will find an overview of the worldwide Cisco
contacts.
Go to: http://www.cisco.com/web/siteassets/contacts/index.html
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY
INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES,
INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO
DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN
IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Corporate Headquarters
Ciso Systems, Inc.
170 West Tasman Dr.
San Jose, CA 95134 USA
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its
affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can
be found at www.cisco.com/go/trademarks. Third party trademarks mentioned
are the property of their respective owners. The use of the word partner does
not imply a partnership relationship between Cisco and any other company.
(1005R)
Any Internet Protocol (IP) addresses and phone numbers used in this document
are not intended to be actual addresses and phone numbers. Any examples,
command display output, network topology diagrams, and other figures
included in the document are shown for illustrative purposes only. Any use of
actual IP addresses or phone numbers in illustrative content is unintentional and
coincidental.
D14852.03 User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
50
www.cisco.com