Master Heat Gun®
Varitemp®
Proheat®
Variair®
Masterflow®
Master-Mite®
Ecoheat®
Ultratorch®
Ultratip®
Ultratane®
EconoIron®
PortaPro®
Multiseal™
Solderseal™
Proseal™
www.masterappliance.com
Master Appliance®
Table of Contents
Electric Heat Guns
Master and Varitemp® Series Heat Guns, Kits and Accessories
5-7
The original heavy-duty heat guns with rugged cast aluminum housing and powerful universal motor
Rotating Swivel Stand
Proheat Series Heat Guns, Kits and Accessories
®
®
8 - 12
Compact, lightweight, easy-to-use with durable Lexan plastic housing
Ecoheat® Heat Gun, Kit and Accessories
13
Economical two temperature heat gun with resettable thermostat for overheating protection
Masterflow® Continuous-Duty Heat Blowers
13
Continuous duty heat blower with powerful 47 CFM airflow. Suitable for mounting over conveyors or on machinery
Master-Mite® and Master-Mite® ESD Continuous-Duty Bench-Top Heating Systems 14
Quiet motor with 3.8 CFM airflow provides a balance of heat and gentle airflow at the work station
EconoIron® Butane-Powered Soldering Iron/Heat Tool and Kit
Economical soldering iron, flameless hot air tool and torch
2
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
15
Master Appliance®
Table of Contents
Ultratorch® Butane-Powered Soldering Irons/Heat Tools and Kits
featuring Ultratip® Technology
Microtorch Butane-Powered Torches and Kits
Light-Duty Models MT-5, MT-11 • Heavy-Duty Models MT-30, MT-51, MT-70, MT-76, GT-70
Ultratane® Butane Fuel
RC-31
fuel cell
16 -23
24 - 27
28
10448
/16 oz.
15
51773
51/8 oz.
PortaPro® Butane-Powered Hot Melt Glue Gun and Kit
29
Cordless flexibility, reaches operating temperature in less than 4 minutes, runs for over 2 hours
MicroPro® Light-Duty Soldering Irons
30
MP-100 Personal electric soldering iron
with stand by mode
BT-30 Battery-powered
for easy transport to job site
Heat-Seal Electrical Connectors, Shrink Tubing and Crimpers
www.masterappliance.com • sales@masterappliance.com
31 - 37
3
Master Appliance Corp., Designers and Manufacturers of Heat Tools for Industry
Located near the western shores of Lake Michigan in Racine, Wisconsin, Master Appliance invented and introduced
the first industrial quality heat gun to the worldwide marketplace in 1958. In 1985, we introduced North America’s first
butane-powered, cordless soldering iron, torch and flameless heat tool, ideal for field use. These professional quality
heat tools, and others developed since, have enjoyed worldwide market success. Today our products are used in thousands of facilities, workshops and in the field for drying, welding, shrinking, soldering, desoldering, gluing and for many
other common and unique applications, where heat is the need.
Master is continually developing new heat tool products, with enhanced capabilities,
making it easier to work with new materials and processes used throughout industry.
With over 50 years of experience, the Master name stands for extraordinary expertise in heat technology, quality products and unsurpassed service. Whether you are
considering a new application, material or process or simply looking to replace an
old, tired heat tool, call us for fast professional service.
Local Availability, Sales, Parts & Service
Master heat tools are sold worldwide through a network of Authorized Stocking
Distributors. Trained Sales and Customer Service Representatives, located at our
headquarters and throughout the world, insure fast personal service. Contact us for
your nearest stocking distributor or sales representative. Visit our website for up-todate information on products, accessories, parts, warranty and repair service.
Master Appliance Corp.
2420 -18th Street, Racine, WI 53403-2300 U.S.A.
Sales/Customer Service: 800-558-9413
Local and International: 262-633-7791
Fax: 262-633-9745
E-mail: sales@masterappliance.com
Website: www.masterappliance.com
Engineering, Design, Research and Development
Master’s goal is to provide the most advanced and rugged heat tools in the
market, and the best product for your specific application. Our Heat Technology
Specialists, using state-of-the art systems, tools and test & measurement
equipment, are constantly striving for better heat tool designs that are ergonomic,
compact and lightweight or feature heavy-duty, stable bases for mounting
or bench-top use.
Manufacturing
Master Heat™ Tool products are made with superior, quality materials and the
finest craftsmanship. Great designs and expert assembly, in a lean, efficient
manufacturing setting, assure our customers maximum product quality,
performance and value.
4
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Master Varitemp® VTS Heat Gun
Deluxe Varitemp Heat Gun with versatile pivoting stand
Stable, deluxe heavy-duty, pivoting metal stand with non-slip rubber feet
Unique, adjustable spring loaded slide handle with ergonomic grip
Easy selection of multiple pivoting angles for hands-free or hands-on use, to
provide the best balance and aim
High temperature and power ratings: Ambient up to 1000°F/540°C
at 1740 watts
Variable temperature control provides easy dial-in temperatures
Powerful high speed universal motor
High airflow rating: 23 CFM at 3000 FPM gets the job done fast
Sturdy die cast aluminum housing
Double protected heating element housing
MADE IN
Easily replaceable, reinforced, mica-insulated ceramic heating element
Externally accessible carbon brush holders for quick replacement
Three position “OFF-COLD-HOT” rocker switch
6 foot, 3-wire grounded cordset made with flexible, oil and sunlight
resistant rubber jacket
UL Listed. Made in USA
Use to shrink tubing and packaging, bend plastics, cure adhesives,
dry and heat parts, strip paint, defrost frozen pipes, heat sensitive
materials, solder/desolder and more
120V Models
Pivoting stand and adjustable
slide grip handle
MASTER VARITEMP® VTS HEAT GUN
MODEL NO. DESCRIPTION
VTS-750
Amb.-1000°F Amb.-540°C
23 CFM 120V
60 Hz
14.5A
1740W
VTS-752
Amb.-750°F Amb.-400°C
23 CFM 220V
50 Hz
7A
1680W
HAS-043K Replacement heating element for VTS-750
HAS-014K Replacement heating element for VTS-752
35257
Replacement brush, spring and cap kit (2 each)
Reflector Attachment
for Heat Shrinking
Optional Accessories
PART NO.
A-160-HG
A-170-HG
35245
30202
51309
51542
51543
51544
DESCRIPTION
Shrink attachment for tubing up to 3/4" O.D.
Shrink attachment for tubing 3/4" to 2" O.D.
Three popular attachments
Solder preform attachment
3/8" pinpoint attachment
Glass protector attachment
2-1/4" spreader attachment
7/8" reducer attachment
Photos of accessories shown on page 7
Specifications
Air Volume: 23 CFM Air Velocity: 3000 FPM Motor: Universal
Nozzle Opening: 1.2" I.D., 1.5” O.D. Cordset: 6 ft., 3-wire
grounded Dimensions: 9" L x 6" W x 12" H .
Tool Net Weight: 5 lbs. Shipping Weight Kit: 8 lbs.
Ergonomic handle with Deluxe stand gives more
spring loaded slide grip
hands-free choices
Replacement Brush,
Spring and Cap Kit
(2 each)
Perfect for bench-top use
in manufacturing
and repair
NOTE: Users should independently evaluate the
suitability of the product for their application.
www.masterappliance.com • sales@masterappliance.com
5
Master & Varitemp® Heat Guns
Professional, heavy-duty, industrial quality, multiple use heat guns
High temperature and power ratings: up to 1000°F/540°C at 1740 watts
Varitemp model features variable temperature control which allows
user to dial-in a any temperature from ambient to 1000°F/540°C
High air flow rating: 23 CFM at 3000 FPM gets the job done fast
Powerful high speed universal motor
Sturdy die cast aluminum housing
Double protected heating element housing
Easily replaceable, reinforced, mica-insulated ceramic heating element
Externally accessible carbon brush holders for quick replacement
Three position “OFF-COLD-HOT” rocker switch
Contoured, well balanced handle
HG Series
Master Heat
Gun®
120V Models
Non-slip rubber-backed base with 90° rotation
6 foot, 3-wire grounded cordset made with flexible, oil and
sunlight resistant rubber jacket
Optional Momentary Contact Switch
UL Listed or CSA Certified. Made in USA
Use to shrink tubing and packaging, bend plastics, cure adhesives,
dry and heat parts, strip paint, defrost frozen pipes, heat sensitive
materials, solder/desolder and more
MADE IN
Momentary Contact Safety Switch:
if not held, will shut the unit off
An option for Master Heat Gun® models.
To order add “MC” suffix to model
number. Example: HG-501A-MC.
Also, many international voltages/cordsets available upon request.
VT Series
Varitemp®
Heat Gun
Contact our Sales Department for
appropriate model numbers.
See our website for other parts and repair service information
MASTER HEAT GUN®
MODEL NO.
DESCRIPTION
HG-201A
200-300°F
93-150°C
23 CFM
HG-301A
300-500°F
150-260°C
23 CFM
HG-501A
500-750°F
260-400°C
23 CFM
HG-501A-D
500-750°F
260-400°C
23 CFM
HG-751A-C
750-1000°F
400-540°C
23 CFM
HG-751B
750-1000°F
400-540°C
23 CFM
HG-202A
200-300°F
93-150°C
23 CFM
HG-302A
300-500°F
150-260°C
23 CFM
HG-502A
500-750°F
260-400°C
23 CFM
HG-752A
750-1000°F
400-540°C
23 CFM
MASTER VARITEMP® HEAT GUN
MODEL NO.
DESCRIPTION
VT-750C
Amb. to 1000°F Amb. to 540°C 23 CFM
VT-752C
Amb. to 750°F Amb. to 400°C 23 CFM
*
120V
120V
120V
120V
120V
120V
220V
220V
220V
220V
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
50 Hz
50 Hz
50 Hz
50 Hz
5A
12A
14A
12A
18A
14.5A
3A
6A
7A
9A
600W
1440W
1680W
1440W
2160W
1740W
600W
1440W
1680W
1740W
120V 60 Hz 14.5A 1740W
220V 50 Hz 7A
1680W
REPLACEMENT
ELEMENT
HAS-042K
HAS-041K
HAS-011K
HAS-011DK
HAS-015K
HAS-043K
HAS-012K
HAS-013K
HAS-014K
HAS-016K
REPLACEMENT
ELEMENT
HAS-043K
HAS-014K
120V Models
Rotating Swivel Stand
Specifications
Air Volume: 23 CFM Air Velocity: 3000 FPM Motor: Universal Nozzle Opening: 1.2"
I.D., 1.5” O.D. Cordset: 6 ft., 3-wire grounded Dimensions: 9" L x 5.2" W x 10.1" H .
Tool Net Weight: 3.7 lbs. Shipping Weight Tool: 5 lbs. Shipping Weight Kit: 10 lbs.
NOTE: Users should independently evaluate the suitability of the product for their application.
6
Replacement Heating
Element
*
NEMA 5-20P Plug
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Master & Varitemp® Kits & Accessories
Add versatility to your HG & VT heat gun models
Quality attachments are made of durable stainless steel
Storage/carrying case protects heat gun and provides ample storage
space for attachments
Kits include a Master Heat Gun® or Varitemp® Heat Gun, A-160-HG
shrink attachment, 51543 spreader attachment and 51544 reducer
attachment packed in a rugged, plastic storage/carrying case
MADE IN
120V Models
120V Models
Master Heat Gun® Kit
MASTER HEAT GUN® KIT
MODEL NO. DESCRIPTION
HG-201AK 200-300°F 93-150°C
HG-301AK 300-500°F 150-260°C
HG-501AK 500-750°F 260-400°C
HG-751BK 750-1000°F 400-540°C
MASTER VARITEMP® HEAT GUN KIT
MODEL NO. DESCRIPTION
VT-750CK Amb.-1000°F Amb.-540°C
23 CFM
23 CFM
23 CFM
23 CFM
120V
120V
120V
120V
23 CFM 120V
60 Hz
60 Hz
60 Hz
60 Hz
5A
12A
14A
14.5A
600W
1440W
1680W
1740W
Varitemp® Heat Gun Kit
60 Hz 14.5A 1740W
Optional Accessories
PART NO.
A-160-HG
A-170-HG
35245
30202 *
51013
51309 *
51542
51543
51544
DESCRIPTION
Shrink attachment for tubing up to 3/4" O.D.
Shrink attachment for tubing 3/4" to 2" O.D.
Three popular attachments
Solder preform attachment
Molded storage carrying case
3/8" pinpoint attachment
Glass protector attachment
2-1/4" spreader attachment
7/8" reducer attachment
NOTE: Users should independently evaluate the
suitability of the product for their application.
Thaw Pipes
Solder/Desolder
A-160-HG
51543
51544
Shrink attachment for
tubing up to 3/4”
2-1/4" Spreader
attachment
7/8" Reducer
attachment
*
A-170-HG
30202
Shrink attachment for tubing
3/4" to 2" O.D.
Solder preform attachment
51309
*
3/8" Pinpoint attachment
51542
35245
51013
Glass protector
attachment
Three of our most popular
attachments
Rugged, plastic storage
and carrying case for
HG & VT Heat Guns only
*
Not for use with HG-751B or HG-752A
www.masterappliance.com • sales@masterappliance.com
7
Proheat® LCD Programmable Heat Gun & Kit
Rugged variable air flow, variable temperature heat gun with digital display
Compact, light weight, easy-to-use
Six preset & customizable program settings with digital display
of temperature and air flow settings
PH-1500
PH-2500
Programmable heat and air flow removes the guess work
Adjustable temperature in 10° increments from 130°F to 1000°F
(50°C to 540°C) in your choice of degrees Fahrenheit or Celsius
Adjustable air flow from 4 to 16 CFM (113 - 453 l/min.)
Electronic closed loop temperature control system maintains
constant temperature when varying air flow or using
specialty attachments
Base functions as built-in stand for hands-free use
Ergonomic handle provides balanced grip
Temperature & Air Flow Lock-In feature provides added management control. Perfect for production applications requiring
consistent application of heat.
NEW !
Power-interrupt Reset for added safety, prevents heat gun
from causing damage if left in “Hot” position during power failure,
when power returns
Made in the USA. 12 month warranty
UL Listed or CE Certified
Use to heat or dry temperature sensitive materials, shrink tubing,
shrink packaging and specialty connectors, solder and desolder,
bend plastics, activate adhesives, remove decals, defrost frozen
pipes and more
Multiple electrical plugs, attachments & bench stand available
- see page 12
Programmable temperature
and air flow controls
with 6 memory functions
Proheat LCD Programmable Heat Gun
with rugged storage case
and all 5 specialty attachments
Quality attachments for
professional applications
MODEL NO. DESCRIPTION
Air Temperature
Air Velocity
Air Volume
PH-1500
Heat Gun
130° F to 1000° F/50°C to 540° C
737-4000 FPM/213-1219m/min
4-16 CFM/113-453 l/min
PH-1500K Heat Gun Kit PH-1500 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
PH-2500
PH-2500K
Heat Gun
130° F to 1000° F/50°C to 540° C
737-4000 FPM/213-1219m/min
4-16 CFM/113-453 l/min
Heat Gun Kit PH-2500 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
120V
60 Hz
11A 1300W
230V 50/60 Hz 6.2A 1426W
Use Preset Programs or Create Your Own
Specifications
Motor: Permanent Magnet Nozzle Opening: .88”I.D., 1.31" O.D.
Cordset: 6 ft., 3-wire grounded Dimensions: 8.2" L x 3.0" W x
7.3" H Tool Net Weight: 1.6 lbs. Shipping Weight Tool: 2 lbs.
Shipping Weight Kit: 7 lbs.
Preset
Program
Temp
°F
1
2
3
4
5
250
450
650
850
1000
Temp Air Flow
°C
CFM
120
230
340
450
540
8
12
14
16
12
Heat Gun
Application
Applying specialty composites
Shrinking tubing
De-soldering circuit boards
Bending & forming plastics
Soldering
NOTE: Users should independently evaluate the
suitability of the product for their application.
8
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Proheat® LCD Dial-in Heat Gun & Kit
Rugged variable air flow, variable temperature heat gun with digital display
Compact, light weight, easy-to-use
LCD with digital display of temperature and air flow settings
Dial-in temperatures in 10° increments from 130°F to 1000°F
(50°C to 540°C) displayed in degrees Fahrenheit or Celsius
PH-1400
PH-2400
Adjustable air flow from 4 to 16 CFM (113 - 453 l/min.)
Electronic closed-loop temperature control system maintains
constant temperature when varying air flow or using
specialty attachments
Base functions as built-in stand for hands-free use
Balanced ergonomic design and grip prevents operator fatigue
Temperature & Air Flow Lock-In feature provides added management control. Perfect for production applications requiring
consistent application of heat
Power-interrupt Reset for added safety, prevents heat gun
from causing damage if left in “Hot” position during power failure,
when power returns
NEW !
Made in the USA. 12 month warranty
UL Listed or CE Certified
Use to heat or dry temperature sensitive materials, shrink tubing,
shrink packaging and specialty connectors, solder and desolder,
bend plastics, activate adhesives, remove decals, defrost frozen
pipes and more
Multiple electrical plugs, attachments & bench stand available
- see page 12
Dial-In variable
temperature & airflow controls
Quality attachments for
professional applications
Proheat LCD Dial-In Heat Gun
with rugged storage case
and all 5 specialty attachments
MODEL NO. DESCRIPTION
PH-1400
PH-1400K
PH-1400-1
Air Temperature
Air Velocity
Air Volume
Heat Gun
130° F to 1000° F/50°C to 540° C 737-4000 FPM/213-1219m/min
4-16 CFM/113-453 l/min 120V
Heat Gun Kit
PH-1400 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
Heat Shrink System PH-1400 Heat Gun with bench stand (35216) and specialty connector attachment (35292)
PH-2400
PH-2400K
PH-2400-1
Heat Gun
130° F to 1000° F/50°C to 540° C 737-4000 FPM/213-1219m/min
4-16 CFM/113-453 l/min 230V 50/60 Hz 6.2A 1426W
Heat Gun Kit
PH-2400 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
Heat Shrink System PH-2400 Heat Gun with bench stand (35216) and specialty connector attachment (35292)
60 Hz
11A 1300W
PH-1400-1
PH-2400-1
Specifications
Bench Top
Heat Shrink System
with Locking Controls
Motor: Permanent Magnet Nozzle Opening: .88”I.D., 1.31" O.D.
Cordset: 6 ft., 3-wire grounded Dimensions: 8.2" L x 3.0" W x
7.3" H Tool Net Weight: 1.6 lbs. Shipping Weight Tool: 2 lbs.
Shipping Weight Kit: 7 lbs.
NOTE: Users should independently evaluate the
suitability of the product for their application.
www.masterappliance.com • sales@masterappliance.com
9
Proheat® Variair® Heat Gun & Kit
Rugged variable air flow, variable temperature heat gun
Compact, light weight, easy-to-use
Balanced ergonomic design prevents operator fatigue
Variable temperature 130°F to 1000°F (54°C to 540°C)
PH-1300
PH-2300
Variable air flow 4 to 16 CFM
Electronic closed loop temperature control system maintains
constant temperature when varying air flow or using specialty attachments
Base provides built-in stand for hands-free use
Protective hand/switch guard and hanging loop
Power-interrupt Reset for added safety, prevents heat gun
from causing damage if left in “Hot” position during power
failure, when power returns
Made in the USA. 12 month warranty
New 230 Volt models PH-2300, PH2300-1 & PH-2300K
NEW !
els
an Mod
Europe
UL Listed or CE Certified
Use to heat temperature sensitive materials
including specialty connectors, solder preforms,
shrink tubing and more
Multiple electrical plugs, attachments & bench
stand available - see page 12
Separate temperature
and air flow controls
Quality attachments for
professional applications
Proheat Variair Heat Gun
with rugged storage case
and all 5 specialty attachments
MODEL NO. DESCRIPTION
PH-1300
PH-1300K
PH-1300-1
Air Temperature
Air Velocity
Air Volume
Heat Gun
130° F to 1000° F/50°C to 540° C 737-4000 FPM/213-1219m/min
4-16 CFM/113-453 l/min 120V
Heat Gun Kit
PH-1300 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
Heat Shrink System PH-1300 Heat Gun with bench stand (35216) and specialty connector attachment (35292)
PH-2300
PH-2300K
PH-2300-1
Heat Gun
130° F to 1000° F/50°C to 540° C 737-4000 FPM/213-1219m/min
4-16 CFM/113-453 l/min 230V 50/60 Hz 6.2A 1426W
Heat Gun Kit
PH-2300 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
Heat Shrink System PH-2300Heat Gun with bench stand (35216) and specialty connector attachment (35292)
Specifications
Motor: Permanent Magnet Nozzle Opening: .88”I.D., 1.31" O.D.
Cordset: 6 ft., 3-wire grounded Dimensions: 8.2" L x 3.0" W x
7.3" H Tool Net Weight: 1.6 lbs. Shipping Weight Tool: 2 lbs.
Shipping Weight Kit: 7 lbs.
NOTE: Users should independently evaluate the
suitability of the product for their application.
10
Bench Top
Heat Shrink System
60 Hz
PH-1300-1
PH-2300-1
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
11A 1300W
Proheat® Varitemp® Heat Gun & Kit
Rugged variable temperature heat gun
Compact, lightweight, easy-to-use
Balanced ergonomic design prevents operator fatigue
Variable temperature 130°F to 1000°F (50°C to 540°C)
Electronic closed loop temperature control system maintains
constant temperature and protects unit from overheating
Base provides built-in stand for hands-free use
Protective hand/switch guard and hanging loop
Made in the USA. 12 month warranty
UL Listed or CE Certified
Use to heat temperature sensitive materials including specialty
connectors, solder preforms, shrink tubing
PH-1200
PH-2200
Multiple electrical plugs, attachments & bench
stand available - see page 12
Easy access variable
temperature control
Quality attachments for
professional applications
Proheat Varitemp with rugged storage
case and all 5 specialty attachments
MODEL NO. DESCRIPTION
PH-1200
PH-1200K
PH-1200-1
Air Temperature
Air Velocity
Air Volume
Heat Gun
130° F to 1000° F/50°C to 540° C 4000 FPM/1219m/min
16 CFM/453 l/min
120V
Heat Gun Kit
PH-1200 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
Heat Shrink System PH-1200 Heat Gun with bench stand (35216) and specialty connector attachment (35292)
PH-2200
PH-2200K
PH-2200-1
Heat Gun
130° F to 1000° F/50°C to 540° C 4000 FPM/1219m/min
16 CFM/487 l/min
230V 50/60 Hz 6.2A 1426W
Heat Gun Kit
PH-2200 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
Heat Shrink System PH-2200 Heat Gun with bench stand (35216) and specialty connector attachment (35292)
Specifications
Motor: Permanent Magnet Nozzle Opening: .88” I.D., 1.31" O.D.
Cordset: 6 ft., 3-wire grounded Dimensions: 8.2" L x 3.0" W x
7.3" H Tool Net Weight: 1.6 lbs. Shipping Weight Tool: 2 lbs.
Shipping Weight Kit: 7 lbs.
Bench Top
Heat Shrink System
60 Hz
11A 1300W
PH-1200-1
PH-2200-1
NOTE: Users should independently evaluate the
suitability of the product for their application.
www.masterappliance.com • sales@masterappliance.com
11
Proheat® Heat Gun, Kit & Accessories
Rugged dual temperature heat gun & momentary contact heat gun
Compact, lightweight, easy-to-use
PH-1000
PH-1100
PH-2000
PH-2100
Balanced ergonomic design prevents operator fatigue
Two heat settings 500°F or 1000°F (260°C or 540°C)
Base provides built-in stand for hands-free use
Protective hand/switch guard and hanging loop
New PH-1000 & PH-2000 models have Momentary Contact Switch
UL Listed or CE Certified, 12 month warranty, Made in USA
Use to activate adhesives, bend plastics, dry filler material,
shrink tubing and more
Multiple electrical plugs, 2 attachments & bench
stand available - see below
NEW !
Specifications
Motor: Permanent Magnet Nozzle Opening: .88”I.D., 1.31" O.D.
Cordset: 6 ft., 3-wire grounded Dimensions: 8.2" L x 3.0" W x
7.3" H Tool Net Weight: 1.6 lbs. Shipping Weight Tool: 2 lbs.
Shipping Weight Kit: 7 lbs.
PH-1100K
PH-2100K
NOTE: Users should independently evaluate the
suitability of the product for their application.
Proheat Dual Temperature Heat Gun with rugged
storage case and 2 attachments (35016 & 35017)
MODEL NO.
DESCRIPTION
PH-1100
PH-1100K
PH-1000
Air Temperature
Air Velocity
Air Volume
500°F or 1000°F /260°C or 540°C 4000 FPM/1219m/min
16 CFM/453 l/min
120V
60 Hz
Heat Gun
Heat Gun Kit PH-1100 Heat Gun with storage case and all 5 attachments (Part No.35309) see page 12 for details
Heat Gun
1000°F /540°C
4000 FPM/1219m/min
16 CFM/453 l/min
120V
60 Hz
with Momentary Contact Safety Switch (if not held, will shut the unit off)
PH-2100
PH-2100K
PH-2000
Heat Gun
500°F or 1000°F /260°C or 540°C 4000 FPM/1219m/min
16 CFM/453 l/min
Heat Gun Kit PH-2100 Heat Gun with storage case and 2 attachments (35017 & 35016)
Heat Gun
1000°F /540°C
4000 FPM/1219m/min
16 CFM/453 l/min
with Momentary Contact Safety Switch (if not held, will shut the unit off)
11A
1300W
11A
1300W
230V
50/60 Hz 6.2A
1426W
230V
50/60 Hz 6.2A
1426W
Proheat® Heat Gun Accessories
Professional quality options and accessories add versatility to
your Proheat Series Heat Gun models. Direct, concentrate or
reflect heat to allow more versatile and precise applications for
your heat tool.
Note: For 230 Volt Proheat Series Heat Guns
destined outside North America,
add suffix A1 or A6 to model number
to designate plug type.
Example: PH-2400-A1 (Continental Europe & others)
PH-2500-A6 (UK & others)
Bench Stand
Storage Case
Prevents
nozzle contact
To position heat guns
for various
applications
Rugged, plastic storage and carrying case
Part No. 35026
Part No. 35216
Nozzle Shield
A1
A6
Part No. 35351
Get all 5!
3-1/2” Spreader
Attachment
1-3/8” Shrink
Attachment
Spread air over
large area
Shrink tubing
Part No. 35016
Part No. 35017
1/2” Specialty
Connector
Attachment*
Terminate tubing and
specialty connectors
Part No. 35292
12
5/16” Pinpoint
Attachment*
9/16” Reducer
Attachment*
Attachment Kit*
Pinpoint hot air
source for
desoldering and
plastic welding
Direct hot air
source for
desoldering and
plastic welding
Part No. 35309
Part No. 35294
Part No. 35293
Five attachments
* Not for PH-1000, PH-1100
PH-2000 or PH-2100
These models do not have
“closed loop temperature features”
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Ecoheat® Heat Gun & Kit
Economical, lightweight, multi-use heat gun
Two heat settings: 500°F or 1000°F (260°C or 540°C)
Two fan speeds - Low or High (7 or 9 CFM)
Resettable thermostat - Automatically protects element against
overheating
Lightweight - 1 lb. - Easy to hold at any angle for long periods of time,
eliminates operator fatigue
Built-in hand guard - Protects hand and fingers. Recessed switch guards
against knocks and bumps
3-wire grounded cordset - Positive grounding system for user safety
Thermoplastic housing - For high impact durability
Built-in stand - Very stable, allows user to set heat gun down in an
upright position for hands-free use
Use to bend and form plastics, dry body fillers, remove decals, spot dry
paint, shrink tubing, packaging and more
MODEL NO. DESCRIPTION
EC-100
500°F or 1000°F 260°C or 540°C 7 or 9 CFM 120V 50/60 Hz 10A 1200W
EC-100K
500°F or 1000°F 260°C or 540°C 7 or 9 CFM 120V 50/60 Hz 10A 1200W
Kit includes EC-100 Heat Gun, 7/8” reducer attachment, 1-1/4” shrink tubing reflector,
1-15/16” and 3-1/8” spreader attachments packed in a durable storage/carrying case
35225
Attachment kit contains 7/8” reducer attachment, 1-1/4” shrink tubing reflector,
1-15/16” and 3-1/8” spreader attachments
35215
Durable storage/carrying case
Kit includes storage case and four specialized
nozzle attachments shown left to right:
7/8” reducer, shrink tubing reflector,
1-5/16” spreader and 3-1/8” spreader
Specifications
Air Volume: 7 or 9 CFM Air Velocity: 720 or 1100 FPM Motor: Permanent Magnet Nozzle
Opening: 1..2" I.D., 1.35” O.D. Cordset: 6 ft., 3-wire grounded Dimensions: 8.5" L x 3.2" W x 7.7" H
Tool Net Weight: 2 lbs. Shipping Weight Tool: 3 lbs. Shipping Weight Kit: 5 lbs.
NOTE: Users should independently evaluate the suitability of the product for their application.
Masterflow® Heat Blower
Heavy-duty, industrial quality, continuous-duty heat blower
3 models produce 300°F, 500°F or 750°F. High temperaturesaccommodate many heating, drying & shrinking applications
MADE IN
High air flow: 47 CFM at 2200 FPM gets job done fast
Brushless induction type motor for quiet, continuous-duty operation
Easily replaceable, reinforced, mica-insulated heating element
Rubber-backed stand permits 90° non-slip adjustability
Use in any position or mount on equipment
Ergonomic handle for carrying or portable use
Mount over conveyor line or on machinery
Replacement
Heating Element
Specifications
*
NEMA 5-20P Plug
Air Volume: 47 CFM Air Velocity: 2200 FPM Motor:
Induction Nozzle Opening: 1.85” I.D., 2.25” O.D.
Dimensions: 12" L x 6" W x 9" H, (AH-301 & AH-302, 9" L
x 6" W x 9" H) Base Size: 6" x 6" Cordset: 6 ft., 3-wire
grounded Net Weight: 6 lbs. Shipping Weight: 8 lbs.
Use to heat or dry materials, bend plastics, shrink wrap and more
MODEL NO.
AH-301
AH-501
AH-751
AH-302
AH-502
AH-752
*
REPLACEMENT
DESCRIPTION
ELEMENT
300°F 150°C 120V 10.0A 60 Hz 1200 W 815
500°F 260°C 120V 14.0A 60 Hz 1680 W 30310
750°F 400°C 120V 18.0A 60 Hz 2160 W 30312
300°F 150°C 240V 5.2A 60 Hz 1200 W 816
500°F 260°C 240V 7.3A 60 Hz 1680 W 30311
750°F 400°C 240V 9.4A 60 Hz 2160 W 30313
NOTE: Users should independently evaluate the suitability of the product
for their application.
www.masterappliance.com • sales@masterappliance.com
13
Master-Mite® Heat Gun
Continuous-duty bench-top heating system
Complete system comes standard with 650°F/343°C heating element,
adjustable stand and heat shrink attachment
Ideal heat & air flow (3.8 CFM), performs benchtop heating jobs
without blowing components around the work station
Quiet-running shaded pole motor, eliminates noisy production areas
3 optional easy-to-change plug-in heating elements available:
500°, 650° & 800°F
Use to activate adhesive, cure epoxies, dry components, melt
solder preforms, remove decals, shrink tubing and more
120V Model
Optional Replacement Heating Elements
30201
40061
PART NO.
20012
20013
20014
20033
20034
20035
20160
20161
20162
DESCRIPTION
Blue
500°F
Silver 650°F
Black 800°F
Blue
500°F
Silver 650°F
Black 800°F
Blue
500°F
Silver 650°F
Black 800°F
260°C
343°C
427°C
260°C
343°C
427°C
260°C
343°C
427°C
120V
120V
120V
220V
220V
220V
240V
240V
240V
340W
475W
525W
400W
450W
500W
400W
450W
500W
Optional Accessories
40060
50675
PART NO.
30201
40060
40061
50675
DESCRIPTION
Solder preform attachment
Heat shrink attachment
1/4" pinpoint attachment
Bench stand
MADE IN
MODEL NO.
10008
10009
10010
DESCRIPTION
650° F/343° C 120V
650° F/343° C 220V
800° F/427° C 240V
60Hz 4.5A 475W
50Hz 2.0A 450W
50Hz 1.9A 450W
Specifications
Air
Volume: 3.8 CFM Air Velocity: 700 FPM Motor: Shaded
Pole Nozzle Opening: .99” I.D., 1.03 O.D." Cordset: 7 ft.,
3-wire grounded Dimensions: 8.8" L x 3.3" W x 7" H Net
Weight: 1.7 lbs. Shipping Weight: 3 lbs.
NOTE: Users should independently evaluate the suitability of the product for their application.
Master-Mite® ESD Heat Gun
Continuous-duty ESD bench-top heating system
Complete system comes standard with black 800°F/427°C heating
element, shrink attachment and adjustable stand
Totally grounded system with housing surface conductivity 500 ohms
square. Conductive housing will not build up or hold a static charge
Housing helps to shield against EMI & RFI (electromagnetic & radio
frequency interference)
A long-life, quiet-running, maintenance free shaded pole motor
Low velocity air flow will not blow components around the workstation
3 optional interchangeable plug-in heating elements available
Complete line of attachments available
Use to activate adhesive, cure epoxies, dry components, melt solder
preforms, remove decals, shrink tubing and more
30201
40060
40061
50675
120V Model
MODEL NO. DESCRIPTION
10012
800°F/427°C 120V 60Hz 4.5A 525W
10014
800°F/427°C 100V 50/60Hz 4.9A 450W
Optional Replacement Heating Elements
PART NO.
20012
20013
20014
DESCRIPTION
Blue 500°F/260°C
Silver 650°F/343°C
Black 800°F/427°C
120V
120V
120V
Optional Accessories
PART NO.
30201
40060
40061
50675
14
DESCRIPTION
Solder preform attachment
Heat shrink attachment
1/4" pinpoint attachment
Bench stand
340W
475W
525W
MADE IN
Specifications
Ave. Air Volume: 3.8 CFM Ave. Air Velocity: 700 FPM
Motor: Shaded Pole Nozzle Opening: .99” I.D., 1.03 O.D."
Cordset: 7 ft., 3-wire grounded Dimensions: 8.8” L x 3.3”
W x 7” H Housing Static Decay 5000V to <50V <0.01 sec.
Housing Surface Res. <500 ohms/sq. Net Weight: 1.75
lbs. Shipping Weight: 3 lbs.
NOTE: Users should independently evaluate the suitability
of the product for their application.
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
EconoIron® EI-20
Economical, butane-powered soldering iron, flameless heat tool & torch
Standard with soldering tip, hot air tip and torch tip
Completely portable, lightweight and easy to handle
Temperatures up to 2370°F/1300°C
Ignite tool with flint lighter built into the cap
Use to pinpoint flameless heat, silver solder, solder and desolder,
heat shrink tubing and environmental connectors, strip insulation
and cut plastics with hot knife tip, use as an open flame torch and
more
US
35388 tip
35390
35389
C
MODEL NO. DESCRIPTION
EI-20
Economical, refillable, butane-powered soldering iron,
flameless heat tool and torch
35390
TORCH HEAD
Optional Accessories
PART NO.
35388
35389
35390
35391
35392
35393
35394
35395
35396
35397
DESCRIPTION
2.4 mm soldering tip (std.)
Flameless hot air tip (std.)
Torch head (std.)
Hot knife tip (std. EI-20K)
Cap with striker wheel
Flat flame
Reflector
Solder head base
Poly cut tip – base req’d
Needle tip – base req’d
35401
1 MM SOLDER TIP
35396
POLY CUT TIP
35397
NEEDLE TIP
PART NO.
35398
35399
35400
35401
35402
35403
35404
35405
35406
35407
DESCRIPTION
2.4 mm soldering tip – base req’d
Double sharp tip – base req’d
Hot knife tip – base req’d
1 mm soldering tip
3.6 mm soldering tip
4.8 mm soldering tip
Disc tip, round 1” dia.
Cutter wheel tip
Scraping blade
Popular accessory kit
35393
FLAT FLAME
35398
2.4 MM SOLDER TIP
35399
DOUBLE SHARP TIP
35389
HOT AIR TIP
35394
REFLECTOR
35388
2.4 MM SOLDER TIP
US
35404
DISC TIP, ROUND
1" dia.
35405
CUTTER WHEEL TIP
35402
3.6 MM SOLDER TIP
35406
SCRAPING BLADE
35403
4.8 MM SOLDER TIP
35400
HOT KNIFE TIP
35391
HOT KNIFE TIP
35395
SOLDER HEAD BASE
Connect
Adjustment Knob
Specifications
Filler Valve
35392 Cap with striker wheel
Approx. Soldering Tip Temp.: 395° F to 780°F (200° C to 420°C)
Approx. Hot Air Tip Temp.: 780° F (420° C) Approx. Torch Temp.:
2370° F (1300° C) Equivalent to Electric Iron: 10 to 60 Watt Approx.
Operating Time: 60 min. Fuel Tank Capacity: .6 fl. oz. (.01 L) Dimensions:
6.5" L (16.6 cm) w/o cap Net Weight: 1.9 oz. (54 g) Shipping Weight: 1 lb.
Shipped Empty
35407 Popular accessory kit includes: 35395 Solder head base,
35396 poly cut tip, 35397 needle tip, 35398 2.4 MM solder tip,
35399 double sharp tip, 35400 hot knife tip
Refill with Master Ultratane Butane
for best performance. (page 28)
NOTE: Users should independently evaluate the suitability of the product for their application.
EconoIron® EI-20K
Economical, butane-powered soldering iron, flameless heat tool & torch kit
Kit contains tool, soldering tip, hot air tip, torch tip, hot knife tip,
coil of 60/40 solder, sponge and tool stand packed in rugged
plastic storage case
Completely portable, lightweight and easy-to-handle
Temperatures up to 2370°F/1300°C
Ignite tool with flint lighter built into the cap
Use to pinpoint flameless heat, silver solder, solder and desolder,
heat shrink tubing and environmental connectors, strip insulation,
cut plastics with hot knife tip, use as an open flame torch and more
MODEL NO. DESCRIPTION
EI-20K
Economical, refillable, butane-powered soldering iron, flameless C
heat tool and torch kit
US
US
Specifications
Approx.
Solder Tip Temp.: 395° F to 780° F (200° C to 420° C) Approx.
Hot Air Tip Temp.: 780° F (420° C) Approx. Torch Tip Temp.: 2370° F (1300° C)
Equivalent to Electric Iron: 10 to 60 Watt Approx. Operating Time: 60 min.
Fuel Tank Capacity: .6 fl.oz. (.01 L) Tool dimensions: 6.5" L (16.6 cm) w/o
cap Kit dimensions: 10" L X 5”W X 2”H (25.4 cm x 12.7 cm X 5 cm) Torch
Net Weight: 1.9 oz. (54 g) Torch Kit Weight: 13.3 oz. (377 g) Shipping
Weight tool: 1 lb. Shipping Weight Kit: 1 lb.(454 g) Shipped Empty
See above for more EI-20 accessories
Refill with Master Ultratane Butane for best performance. (page 28)
NOTE: Users should independently evaluate the suitability of the product for their application.
www.masterappliance.com • sales@masterappliance.com
15
High Performance Ultratip® Technology
Longer tip life, superior thermal conductivity
Master Appliance Ultratorch® heat tools feature Ultratip® soldering
tips. Ultratip is the long lasting, oxygen-free, copper based, iron and
chrome plated soldering tip with a built-in catalyst, tinned with leadfree solder.
Ultratorch heat tools, with Ultratip Technology, are perfect for use
with today’s lead-free solders. In fact, Ultratip soldering tips have
more than double the iron and chrome plating thickness of our
competitors’ brass based tips, providing higher thermal conductivity
and much longer tip life.
Tips for Lead-Free Hand Soldering
Because hand soldering tends to be done at the end of the line, where
the value of a board is at its highest, switching to lead-free solder
may have a significant effect on your manufacturing yields, costs and
productivity. Simply increasing tip temperature is not the answer
because it can cause flux to evaporate before it's had time to activate.
The keys to success here are tip material, tip shape, tip condition,
the soldering iron's power output and it's time on the joint.
By choosing the tip shape closest to the component you're soldering,
and always selecting the largest tip, you'll transfer heat more efficiently
at lower settings. We offer a wide selection of tips for your applications.
Since lead-free solder's higher tin content erodes the tip's iron plating
faster, Ultratip's thicker iron and chrome plating will significantly extend
the tip life. Cleaning your tips often and immediately re-tinning them will
also keep them in top condition longer.
Ultratorch® UT-35
Economical, butane-powered, 3-in-1 soldering iron, flameless heat tool & torch
Standard with Ultratip® soldering tip, hot air tip
and protective cap
3-in-1 soldering iron, flameless heat tool and torch
Completely portable, lightweight and easy to use
Does not require cords, batteries or cartridges, just a lighter
Adjustable temperature control for temperatures up to 1200°F
Equivalent to a 20-60 watt electric soldering iron
Built-in window indicates fuel level
Refill with Master Ultratane Butane for best performance. (page 28)
Use to pinpoint heat, remove surface mount components, repair
vinyl, heat shrink tubing, solder & desolder, spot dry, strip insulation with hot knife and more
60-01-02 tip
60-01-52
MODEL NO. DESCRIPTION
UT-35
Professional quality, economical, butane-powered
soldering iron, flameless heat tool and torch
Optional Accessories
PART NO.
60P-1
60P-1C
60P-1.2D
60P-1.6D
60P-0.5B
60-02
60-07U
60-14
DESCRIPTION
.2mm needle preheat soldering tip
1mm tapered needle preheat soldering tip
1.2mm chisel preheat soldering tip
1.6mm chisel preheat soldering tip
.5mm needle preheat soldering tip
Protective cap (standard)
Ejector unit
Knurled cap nut
PART NO.
60-01-01
60-01-02
60-01-03
60-01-04
60-01-52
70-01-55
113-01-10
60P-K
DESCRIPTION
1mm diameter tapered needle tip
3.3mm diameter chisel tip (std.)
2mm diameter spade tip
3mm diameter spade tip
5.6mm O.D./4.71mm I.D. hot air tip (std.)
Heat shrink attachment
Hot knife tip
Preheat hot knife tip
Specifications
Soldering Tip Temp.: 932° F (500° C) max Hot Air Tip Temp.: 1200° F (650° C) max Torch Tip
Temp.: 2370° F (1300° C) max Equivalent to 20 to 60 Watt Electric Iron Operating Time: approx 60
min. Fuel Tank Capacity: 12 ML Dimensions: 7.3" L (185 mm) w/o cap Net Weight: 2.6 oz. (74g)
Shipping Weight: 1 lb. Shipped Empty
Refill with Master Ultratane Butane for best performance. (page 28)
16
60P-1
60-01-01
60P-1C
60-01-02
60P-1.2D
60-01-03
60P-11.6D
60-01-04
60P-0.5B
60-01-52
60-02
70-01-55
60-07U
113-01-10
60-14
60P-K
NOTE: Users should independently evaluate the
suitability of the product for their application.
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Ultratorch® UT-40Si & UT-40SiH
Professional quality, economical, self-igniting soldering iron & flameless heat tool
Standard with Ultratip® soldering tip, hot air tip and protective cap
Convenient slide switch ignition system for quick ignition
Adjustable temperature lever for temperatures up to 1202°F
Equivalent to a 20-80 watt electric soldering iron
Compact size, lightweight and completely portable
Rugged, easy-to-hold plastic body
Butane powered with patented gas catalyst reaction system
Use to pinpoint heat, remove surface mount components, repair
vinyl, heat shrink tubing, solder & desolder, spot dry, strip insulation
with hot knife and more
UT-40Si
91-01-02 tip
91-01-52
91-01-52 tip
MODEL NO. DESCRIPTION
UT-40Si
Ultratorch soldering iron/flameless heat tool
UT-40SiH
Ultratorch w/hot air tip & shrink attachment
Optional Accessories
PART NO.
91-01-01
91-01-02
91-01-03
91-01-04
91-01-50
91-01-52
70-01-55
91-01-53
91-02
70-52U
Soldering Tips
DESCRIPTION
SOLDERING TIPS
1mm wide chisel soldering tip
2.4mm wide chisel soldering tip (std. Ut-40Si, Ut-40SiK)
2mm wide chisel soldering tip
5mm wide chisel soldering tip
HOT AIR TIPS AND SHRINK ATTACHMENT
1.6mm wide hot air tip
4.7mm wide hot air tip (std. all models)
.5” dia. shrink attachment (std. UT-40SiH, UT-40SiK)
(requires 91-01-52)
HOT KNIFE TIP
Standard/with UT-40SiK
PROTECTIVE CAP & CARRYING STRAP
Protective cap (std. all models)
Carrying strap
Heat Tips
Heat Shrink Attachment
91-01-50
91-01-01
70-01-55
91-01-04
91-01-52
Protective Cap
91-02
91-01-02
Hot Knife Tip
91-01-53
Carrying Strap
91-01-03
70-52U
Specifications
See
UT-40SiH
70-01-55
NOTE: Users should independently evaluate the suitability
of the product for their application.
UT-40SiK for tool specifications
Ultratorch® UT-40SiK
Professional quality, economical, self-igniting soldering iron & flameless heat tool kit
Kit contains Ultratorch, Ultratip® soldering tip, hot air tip, hot knife
tip, shrink attachment, cap, sponge and stand, packed in a
rugged plastic storage/carrying case
Convenient slide switch ignition system for quick ignition
Adjustable temperature lever for temperatures up to 1202°F,
Equivalent to a 20-80 watt electric soldering iron
Compact size, lightweight and completely portable, features
a rugged, easy-to-hold plastic body
Patented gas catalyst reaction system
Use to pinpoint heat, remove surface mount components, repair
vinyl, heat shrink tubing, solder & desolder, spot dry, strip
insulation with hot knife and more
MODEL NO.
UT-40SiK
DESCRIPTION
Ultratorch UT-40SiK Kit
Specifications
Approx. Soldering Tip Temp. 840° F (450° C) Approx. Hot Air Tip
Temp.: 1202° F (650° C) Equivalent to Electric Iron: 20 to 80 Watt
Approx. Operating Time: 1.3 hrs. Fuel Tank Capacity: .5 fl. oz
Dimensions: 8.3" L (208 mm) Tool Net Weight: 2.6 oz. Shipping
Weight Tool: 1 lb. Shipping Weight Kit: 2 lbs. Shipped Empty
See above for more UT-40Si accessories.
NOTE: Users should independently evaluate the suitability of the product for their application.
www.masterappliance.com • sales@masterappliance.com
Refill with Master Ultratane Butane
for best performance. (page 28)
17
Ultratorch® UT-50
Professional quality, pen-sized butane-powered soldering iron, flameless heat tool and torch
Standard with Ultratip® soldering tip, hot air tip and protective cap
Pen-sized heat tool fits in your shirt pocket for absolute portability
Aluminum fuel tank with viewing window to indicate fuel level
Optional tips and accessories available
Operates for approximately 20 minutes on a full charge
Use to pinpoint heat, remove surface mount components, repair
vinyl, heat shrink tubing, solder and desolder, spot dry, torch
materials and more
71-01-02 tip
71-01-52
MODEL NO. DESCRIPTION
UT-50
Butane-powered soldering iron, flameless heat tool and torch
Optional Accessories
PART NO.
71-01-01
71-01-02
71-01-03
71-01-04
71-01-50
71-01-52
70-01-55
70-35
70-52U
DESCRIPTION
1 mm dia. tapered needle tip
2.4 mm dia. chisel tip (standard)
2 mm dia. spade tip
3 mm dia. spade tip
1.5mm dia. hot air tip
4.7mm dia. hot air tip (standard)
Heat shrink attachment
Ejector spanner wrench
Carrying strap
71-01-01
71-01-02
71-01-04
71-01-50
71-01-03
71-01-52
Specifications
Approx.
Approx.
Soldering Tip Temp.: 392° F to 842° F (200° C to 450° C)
Hot Air Tip Temp.: 806° F (430° C) Approx. Torch Tip Temp.:
2372° F (1300° C) Equivalent to Electric Iron: 20 to 60 Watt Approx.
Operating Time: 20 min. Fuel Tank Capacity: .2 fl. oz. (6 cc)
Dimensions: 6.5" L (165 mm) Net Weight: 2.2 oz. (53 g)
Shipping Weight: 1 lb. Shipped Empty
70-35
70-01-55
70-52U
Refill with Master Ultratane Butane
for best performance. (page 28)
NOTE: Users should independently evaluate the suitability of the product for their application.
Ultratorch® UT-100SiEA
Self-igniting butane-powered flameless heat tool with fan assisted airflow
Eliminates scorching and burning damage to shrink tubing
during installation
Variable temperature 302°F to 572°F (150°C to 300°C) with fan
Enhanced Air Flow volume is 4 times greater with fan
Variable temperature 482°F to 932°F (250°C to 500°C) without fan
Butane-powered and completely portable/cordless, for use where
no electrical outlets are available
Built-in battery-powered motor uses 4 standard AA batteries
Built-in LED light provides lighting in dark locations
Built-in stand is convenient for safety and hands-free use
Ideal for terminating shrink tubing and specialty connectors 10mm I.D. or less
Use with or without enhanced air flow and with or without shrink attachment
Ergonomic handle makes tool easy to use over an extended period of time
UL & TUV Listed
Built-In
LED
MODEL NO. DESCRIPTION
UT-100SiEA Butane-powered flameless heat tool with fan assisted airflow
Specifications
Approx. Hot Air Temp.with fan: 302° F to 572° F (250°C to 500°C)
Approx. Hot Air Temp.without fan: 482° F to 932° F (150°C to 300°C)
Approx. Operating Time: 100 min. Fuel Tank Capacity: 1 fl. oz. (28 cc)
Dimensions: 10.25" L (242 mm) 8.25” H (242 mm) Hot Air Tip
Opening: 8mm dia. Net Weight: 11.25 oz. (319 g) Shipping Weight: 1 lb
(453g). Shipped Empty
NOTE: Users should independently evaluate the suitability
of the product for their application.
18
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Ultratorch® UT-100 & UT-100-TC
Butane-powered soldering iron, flameless heat tool and torch
Triple function soldering iron, flameless heat tool
and brazing torch
Features oxygen-free, copper based Ultratip® soldering
tips, with thick iron and chrome plating for long life and
high thermal conductivity
Cordless and completely portable, ready-to-use
in 30 seconds
Adjustable temperature control
Soldering temperature up to 932°F, ideal for use with
today’s lead-free solder
Hot air temperature up to 1202°F, perfect for Solderseal™
environmental “heat and seal” connectors
Torch temperatures up to 2372°F/1260°C
Sturdy metal tank with fuel viewing window holds enough
fuel for 2 hours of operation
Refill with Master Ultratane Butane for best performance.
(page 28)
Use to pinpoint heat, remove surface mount components,
repair vinyl, heat shrink tubing, solder and desolder, spot dry,
torch materials and more
Optional accessories available and interchangeable
between UT-100 & UT100Si. (See page 20)
MODEL NO. DESCRIPTION
UT-100-TC Includes Ultratorch, three Ultratip soldering tips:
70-01-01, 70-01-02, 70-01-05, hot air tip: 70-01-52,
shrink attachment: 70-01-55, hot knife: 70-01-16,
70-07TU torch ejector, open end wrench, ejector,
sponge, cap, solder, wire cutter and needle nose
pliers packed in a rugged plastic carrying case
UT-100
Includes Ultratorch, Ultratip soldering tip: 70-01-02,
hot air tip: 70-01-52, shrink attachment: 70-01-55,
70-07TU torch ejector, open end wrench, ejector,
sponge and steel case
UT-100-TC
Ultratorch Professional Kit:
Includes heat tool, 3 soldering tips, flameless hot air and open flame torch tips,
hot knife, solder, wire cutter, needle nose pliers and cap
in a rugged storage/carrying case
70-01-55
70-01-02 tip
70-35
70-01-52
70-07TU
UT-100
Ultratorch
See page 20 for more tips & accessories
Refill with Master Ultratane Butane
for best performance. (page 28)
Solder
Flameless Heat
Specifications
Approx.
Approx.
Soldering Tip Temp.: 392° F to 932° F (200° C to 500° C)
Hot Air Tip Temp.: 1112° F (600° C) Approx. Torch Tip Temp.
2372° F (1260° C) Equivalent to Electric Iron: 20 to 80 Watt Approx.
Operating Time: 120 min. Fuel Tank Capacity: 1 fl. oz. (28 cc)
Tool dimensions: 9.5" L (242 mm) Tool Net Weight: 3.7 oz. (90 g)
UT-100 Shipping Weight: 1 lb. UT-100-TC Shipping Weight: 3 lb
(131KG) Shipped Empty
NOTE: Users should independently evaluate the suitability of the product for their application.
Torch
www.masterappliance.com • sales@masterappliance.com
19
Ultratorch® UT-100 & UT-100Si Tips and Accessories
For use with UT-100 & UT-100Si Ultratorches
Oxygen-free, copper based Ultratip® soldering tips have thick iron
and chrome plating for long life and high thermal conductivity
Ultratips are manufactured using a patented process which produces
uniform iron and chrome plating thickness
Soldering Tips
70-01-01
70-01-02
Ultratip® soldering tips feature leading-edge combustion
chamber/exhaust port design
All tips pre-tinned with lead-free solder
70-01-03
70-01-04
Optional accessories interchangeable between all UT-100
& UT-100Si models
PART NO.
70-01-01
70-01-02
70-01-03
70-01-04
70-01-05
70-01-06
70-01-07
70-01-08
70-01-09
70-01-10
70-01-11
70-01-12
70-01-13
70-01-15
70-01-16
70-01-50
70-01-51
70-01-52
70-01-53
70-01-54
70-01-55
70-02
70-07TU
70-35
70-37U
70-40U
70-43
70-52U
90-02
80-40
70-01-14
DESCRIPTION
SOLDERING TIPS
1mm dia. tapered needle soldering tip (std. UT-100-TC, UT-100Si-TC)
3.3mm dia. chisel soldering tip (std., all models)
2mm dia. spade soldering tip
3mm dia. spade soldering tip
0.5mm dia. tapered needle soldering tip (std. UT-100-TC, UT-100Si-TC)
2mm dia. micro spade soldering tip
0.5mm dia. square tapered pyramid soldering tip
2mm dia. 35° spade soldering tip
3mm dia. 35° spade soldering tip
1mm dia. offset tapered needle soldering tip
8mm dia. high powered chisel soldering tip
3mm dia. high powered round head needle tip
.5mm dia. high powered long tapered chisel tip
7mm dia. 45° spade soldering tip
HOT KNIFE TIP
Hot knife tip (std. UT-100-TC, UT-100Si-TC)
HOT AIR TIPS
2.5 O.D./1.59 I.D. (mm) hot air tip
4.25 O.D./3.3 I.D. (mm) hot air tip
5.7 O.D./4.9 I.D. (mm) hot air tip (std. all models)
8.0 O.D./6.9 I.D. (mm) hot air tip
ACCESSORIES
Large heat shrink attachment
Small heat shrink attachment (std. all models)
Protective cap (std. UT-100, UT-100-TC)
Ejector, torch (std. UT-100, UT-100-TC)
Ejector spanner wrench
Tip cleaner sponge (std. with UT-100, UT-100SiK)
Metal storage box (std. with UT-100, UT-100SiK)
Tool holder (std. with UT-100, UT-100SiK)
Carrying strap
Protective cap (std. UT-100Si, UT-100Si-TC)
Open end wrench (std. UT-100Si, UT-100SiK and UT-100Si-TC)
ADAPTER
8.4 tip adapter (4mm dia. x .7 pitch mm)
70-01-05
70-01-06
70-01-07
70-01-08
70-01-09
70-01-10
70-01-11
70-01-12
70-01-13
Hot Knife Tip
70-01-16
70-01-15
Adapter
70-01-14
Hot Air Tips
70-01-50
70-01-52
70-01-51
70-01-53
70-07-TU
Accessories
70-02
70-35
70-37U
70-40U
70-43
70-52U
NOTE: Users should independently evaluate the suitability
of the product for their application.
70-01-54
80-40
20
70-01-55
90-02
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Ultratorch® UT-100Si, UT-100SiK & UT-100Si-TC
Self-igniting butane-powered soldering iron and flameless heat tool
Dual function, self-igniting soldering iron and flameless heat tool
Features oxygen-free, copper based Ultratip® soldering tips,
with thick iron and chrome plating for long life and high
thermal conductivity
Cordless and completely portable, ready-to-use in 30 seconds
Self-ignition with push button for fast, easy starting
Adjustable temperature control
Soldering temperature up to 932°F, ideal for use with today’s
lead-free solder
Hot air temperature up to 1202°F, perfect for Solderseal™
environmental “heat and seal” connectors
Sturdy metal tank with fuel viewing window holds enough fuel
for 2 hours of operation
Contains everything needed to heat shrink tubing and specialty
connectors, remove surface mount components, solder and
desolder, repair vinyl, spot dry and cut materials
Optional accessories available and interchangeable between
UT-100 & UT100Si. (See page 20)
MODEL NO. DESCRIPTION
UT-100Si-TC Includes Ultratorch, three Ultratip soldering tips:
70-01-01, 70-01-02, 70-01-05, hot air tip: 70-01-52,
shrink attachment: 70-01-55, hot knife: 70-01-16,
open end wrench, ejector, sponge, cap, solder,
wire cutter and needle nose pliers packed in a
rugged plastic carrying case
UT-100SiK
Includes Ultratorch, Ultratip soldering tip: 70-01-02,
hot air tip: 70-01-52, shrink attachment: 70-01-55,
open end wrench, ejector, sponge and steel case
UT-100Si
Includes Ultratorch, Ultratip soldering tip: 70-01-02,
hot air tip: 70-01-52, shrink attachment: open end
wrench, ejector and cap
UT-100Si-HK Includes Ultratorch, hot knife: 70-01-16, open end
wrench, ejector and cap
Hot Knife Tip
UT-100Si-TC
Ultratorch Professional Kit:
Includes heat tool, 3 soldering tips and flameless hot air tip, hot knife, solder,
wire cutter, needle nose pliers and cap
in a rugged storage/carrying case
UT-100SiK
Ultratorch Kit
70-01-02 tip
NEW !
70-01-55
80-40
70-35
UT-100Si-HK
Ultratorch
70-01-52
UT-100Si
Ultratorch
70-01-02
soldering tip
70-01-55
70-01-52
80-40
See page 20 for more accessories
70-35
90-02
Specifications (UT-100Si)
Approx.
Soldering Tip Temp.: 482° F to 932° F (250° C to 500° C) Approx.
Hot Air Tip Temp.: 1202° F (650° C) Equivalent to Electric Iron: 20 to 80 Watt
Approx. Operating Time: 120 min. Fuel Tank Capacity: 1 fl. oz. (28 cc)
Dimensions: 10.3" L (260 mm) Tool Net Weight: 5.5 oz. (100 g) Shipping
Weight UT-100Si: 1 lb Shipping Weight UT-100SiK: 2 lbs Shipping Weight
UT-100Si-TC: 2 lbs Shipped Empty
Refill with Master Ultratane Butane
for best performance. (page 28)
NOTE: Users should independently evaluate the suitability of the product for their application.
www.masterappliance.com • sales@masterappliance.com
21
Ultratorch® UT-200, & UT-200Si
Butane-powered soldering iron/heat tools
2.6 Hour Run Time
2.6 Hour Run Time
72-02
72-01-02 tip
72-01-55
72-01-52
72-01-02 tip
2.6 hour Run Time
72-02
72-01-55
80-35
72-01-52
80-40
UT-200
Operates as a soldering iron, flameless heat tool and
butane torch
Standard with Utratip® soldering tip, hot air tip, shrink
attachment and protective cap
Equivalent to 200 watt max. electric soldering iron
Adjustable temperatures up to 2372°F/1260°C
High power (BTU’s) makes it perfect for heavy-duty service
and maintenance
Sturdy metal tank holds enough fuel for 2.6 hours of
operation at middle temperature setting
Refill with Master Ultratane Butane for best performance. (page 28)
Use to pinpoint heat, heat shrink tubing, solder and desolder,
strip insulation, terminate specialty connectors, torch materials
and more
Optional accessories interchangeable between UT-200, UT-200Si
and UT-300Si models
MODEL NO. DESCRIPTION
UT-200
Butane-powered soldering iron, heat tool and torch
with soldering tip, hot air tip, shrink attachment and
protective cap
UT-200A
Butane-powered soldering tool with jumbo tip
UT-200Si
Self-igniting, butane-powered soldering iron/heat tool,
with soldering tip, hot air tip, shrink attachment and
protective cap
UT-200SI
Operates as a soldering iron and flameless heat tool
Self-ignition with push button for fast, easy starting
Standard with Utratip® soldering tip, hot air tip, shrink attachment,
spanner wrenches and protective cap
Equivalent to 200 watt max. electric soldering iron
Adjustable temperatures up to 1004°F/540°C
High power (BTU’s) makes it perfect for heavy-duty service
and maintenance
Sturdy metal tank holds enough fuel for 2.6 hours of
operation at middle temperature setting
Refill with Master Ultratane Butane for best performance. (page 28)
Use to pinpoint heat, heat shrink tubing, solder and desolder,
strip insulation, terminate specialty connectors, torch materials
and more
Optional accessories interchangeable between UT-200, UT-200Si
and UT-300Si models
Solder
Desolder
Torch
(UT-200 only)
Flameless Heat
See page 23 for more accessories
Refill with Master Ultratane Butane for best performance. (page 28)
Specifications
Approx. Soldering Tip Temp.: 482° F to 986° F (250° C to 530° C)
Approx. Hot Air Tip Temp.: 1004° F (540° C) Approx Torch Temp
UT-200 2372°F (1260°C) Fuel Tank Capacity: 2.2 fl. oz. (63 cc)
Dimensions: 11.9" L (300 mm) Net Weight: 9 oz. (186 g)
Shipping Weight: 1 lb. Shipped Empty
NOTE: Users should independently evaluate the suitability
of the product for their application.
22
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Ultratorch® 300Si
Butane-powered pistol grip soldering iron and flameless heat tool
Operates as a soldering iron or flameless heat tool
Standard with Ultratip® soldering tip, hot air tip, shrink attachment
and protective cap
Convenient slide switch ignition system for quick ignition
Pistol grip design, great for extended use applications
High performance soldering tip can reach approx. 932°F/500°C
Built-in window indicates fuel level
High capacity, can run up to 3 hours on a full tank
Use to pinpoint heat, heat shrink tubing, solder and
desolder, strip insulation, terminate specialty connectors
and more
Optional accessories interchangeable between UT-200, UT-200Si
and UT-300Si models
72-01-11 tip
3 Hour Run Time
MODEL NO. DESCRIPTION
UT-300Si
Butane-powered soldering iron and flameless heat tool
Specifications
Approx. Soldering Tip Temp.: 932° F (500° C) Approx. Hot Air Tip
Temp.: 1112° F (600° C) Equivalent to Electric Iron: 200 Watt max.
Approx. Operating Time: 180 min. Fuel Tank Capacity: 2.7 fl. oz.
(80cc) Dimensions: 7.3" H x 6.8" L (186 mm H x 172 mm W)
Net Weight: 9.9 oz. (352 g) Shipping Weight: 1 lb. Shipped Empty
78-02
72-01-52
72-01-54
Refill with Master Ultratane Butane for best performance. (page 28)
NOTE: Users should independently evaluate the suitability of the product for their application.
Ultratorch® UT-200, UT-200Si & UT-300Si Tips and Accessories
For use with UT-200, UT-200Si & UT-300Si Ultratorches
Oxygen-free, copper based Ultratip® soldering tips have thick
iron and chrome plating for long life and high thermal conductivity
Ultratips are manufactured using a patented process which
produces a uniform iron and chrome plating thickness
Ultratip® soldering tips feature leading-edge combustion
chamber/exhaust port design
All tips are pre-tinned with lead-free solder
Optional accessories interchangeable between UT-200, UT-200Si
and UT-300Si models
PART NO.
DESCRIPTION
SOLDERING TIPS
72-01-01
3mm dia. tapered needle soldering tip
72-01-02
10mm dia. chisel soldering tip (std. UT-200, UT-200Si)
72-01-03
4mm dia. spade soldering tip
72-01-05
1mm dia. tapered needle soldering tip
72-01-06
4mm dia. micro spade soldering tip
72-01-07
1.5mm dia. tapered pyramid soldering tip
72-01-11
7mm dia. chisel soldering tip (std. UT-300Si)
72-01-12
4mm dia. chisel soldering tip
72-01-13
12.5mm dia. 45° spade soldering tip
HOT AIR TIPS
72-01-51
5.6 O.D./3.6 I.D. (mm) hot air tip
72-01-52
8.6 O.D./6.6 I.D. (mm) hot air tip (std. all models)
72-01-53
11.5 O.D./9.7I.D. (mm) hot air tip
ACCESSORIES
72-01-54
Heat shrink attachment 32mm wide (std. UT-300Si)
72-01-55
Heat shrink attachment 27mm wide (std. UT-200, UT-200Si)
72-02
Protective cap (std. UT-200, UT-200Si)
72-52U
Carrying strap
80-35
Ejector spanner wrench (std. UT-200Si)
80-40
Open end wrench (std. UT-200, UT-200Si)
78-02
Protective cap (std. UT-300Si only)
ADAPTER
72-01-14
Adapter (5mm dia. x 8mm pitch) tip
Soldering Tips
72-01-02
72-01-01
72-01-03
72-01-05
72-01-06
72-01-07
72-01-11
72-01-12
72-01-13
72-01-14
Hot Air Tips
72-01-51
72-01-52
72-01-53
72-02
72-52U
Accessories
width
72-01-54 (32mm wide)
72-01-55 (27mm wide)
80-35
80-40
78-02
NOTE: Users should independently evaluate the suitability
of the product for their application.
www.masterappliance.com • sales@masterappliance.com
23
Microtorch Model MT-5
Pocket-sized, self-igniting butane-powered microtorch
Compact pocket size that fits easily into pocket or tool kit
Quick starting self-igniting piezo electric ignition eliminates the
need for lighters or matches
Flame resists wind and moisture and is perfect for outdoor use
MORE
GAS
LESS
GAS
Adjustable flame height for low and high temperatures up to
2500°F/1300°C blue flame
Safety lock and attached safety cap prevent unintentional ignition
Hands-free mode
Refill with Master Ultratane Butane for best performance. (page 28)
Meets Consumer Products Safety Commission (CPSC) Child Safety
Requirements
Use to heat and ignite materials, repair glass, shrink tubing,
solder and desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTION
MT-5
Pocket-sized Microtorch
Specifications
Approx.
Approx.
Flame Temp. 2500° F Fuel Tank: Plastic, Built-in, Refillable
Run Time: 20 min. @ max. setting Dimensions: 2.9" H x 1.3"
W x .9" D Net Weight: 1.7 oz. Shipping Weight: 1 lb. Shipped Empty
NOTE: Users should independently evaluate the suitability
of the product for their application.
Microtorch Models MT-11 & MT-11K
Compact palm-sized, self-igniting, butane-powered microtorch & kit
Built-in self-igniting system with safety lock
Temperatures up to 2500°F/1300°C
Compact palm-sized, perfect for tool kits and field service kits
Adjustable wind-resistant flame
Replaceable, refillable “fuel cell” (included)
Meets Consumer Products Safety Commission (CPSC)
Child Safety Requirements
Kit includes microtorch with empty fuel cell and 15/16 oz. can of
butane packed in single shipper carton with proper D.O.T. markings
Ships via ground transportation without hazmat charges
Use to heat materials, ignite materials, pinpoint torch, shrink tubing,
solder and desolder, terminate specialty connectors and more
MODEL NO.
MT-11
MT-11K
RC-31
DESCRIPTION
Palm-sized Microtorch, shipped without fuel
Microtorch with 15/16 oz. can of butane (10448)
Replacement fuel cell 2 pack (see page 28)
Specifications
Approx. Flame Temp.: 2500° F Approx. Run Time: 20 min. @ max. setting Fuel Tank: Refillable Fuel Cell Dimensions: 4.3" H x 2.5" W x 1" D
Net Weight: 2.1 oz. Shipping Weight: 1 lb. Shipping Weight Kit: 2 lbs.
NOTE: Users should independently evaluate the suitability
of the product for their application.
24
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Microtorch Model MT-30
Low profile, table-top Microtorch with stable base
Built-in self-igniting system with safety lock that ensures the switch
is not turned on when not in use
Wide, heavy, stable base is perfect for bench-top use
NEW !
Durable self-contained, refillable metal fuel tank
60 minute continuous run time with a full charge
Adjustable broad or pinpoint flame
Safety lock prevents unintentional ignition, locks for storage
Refill with Master Ultratane Butane for best performance. (page 28)
Use to heat materials, ignite materials, pinpoint torch, shrink tubing,
solder and desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTION
MT-30
Low profile table-top Microtorch
Specifications
• Approx. Flame Temp.: 2500° F • Approx. Run Time: 60 min. @ max.
setting • Fuel Tank: Metal, Built-in, Refillable • Dimensions: 5.1" L x 3" W
x 3.5" D • Net Weight: 12 oz. • Shipping Weight: 1 lb. Shipped Empty
NOTE: Users should independently evaluate the suitability
of the product for their application.
Mini-Triggertorch Model MT-70 & MT-70P
Self-igniting butane-powered heat tool
Gas adjustment wheel provides adjustable, long blue torch flame
with temperatures up to 2,500°F/1300°C
Self-igniting piezo electric ignition is easy to start and eliminates the
need for lighter or matches
Incorporates “trigger” switch with “pulldown” lock to meet Consumer
Products Safety Commission (CPSC) Child Safety Requirements
“Hands-free” slide lock for continuous use and instant off operation
Ergonomic handle design ensures a non-slip grip
Removable base for table-top or hand-held use
NEW !
60 minute continuous run time with a full charge
Durable self-contained, refillable plastic fuel tank
Refill with Master Ultratane Butane for best performance (page 28)
Unique shutter lever to easily extinguish ignition flame if using
optional soldering or hot air tip attachments
Use to heat parts, ignite materials, melt plastic, shrink tubing, solder
& desolder, terminate specialty connectors and more
MODEL NO. DESCRIPTION
MT-70
Table-Top Mini-Triggertorch
MT-70P
MT-70 Mini-Triggertorch & MT-11 Palm-sized Microtorch
Specifications
Approx. Flame Temp.: 2500° F • Approx. Run Time: 60 min. @ max.
setting • Fuel Tank: Plastic, Built-in, Refillable • MT-70 dimensions: 5.5" L
x 3.8" H x 1.3" W • Net Weight: 6.4 oz. • Shipping Weight: 1 lb. Shipped Empty • MT-70P shipping weight 2 lbs.
•
US
NOTE: Users should independently evaluate the suitability
of the product for their application.
www.masterappliance.com • sales@masterappliance.com
25
Microtorch Models MT-51, MT-51B & MT-51H
Hand-held or table-top butane-powered microtorch
Built-in self-igniting system with gas shut-off safety lock
Durable self-contained, refillable plastic fuel tank
Wide, stable base is perfect for hands-free use
Temperature up to 2500°F/1300°C
2 hour continuous burn time, perfect for continuous heat applications
Adjustable broad or pinpoint flame
Refill with Master Ultratane Butane for best performance. (page 28)
MT-51
Meets Consumer Products Safety Commission (CPSC)
Child Safety Requirements
Use to heat materials, ignite materials, pinpoint torch, shrink tubing,
solder and desolder, terminate specialty connectors and more
US
C
US
MT-51B
Included butane
canister provides
three fuel refills.
Butane
10448
MT-51B ships via ground
transportation with no
Hazmat charges
MT-51H
Includes Hot Air Tip &
Heat Reflector for heat
shrink applications.
MODEL NO.
MT-51
MT-51B
MT-51H
Hot Air Tip
DESCRIPTION
Microtorch, table-top
Microtorch, table-top with 15/16 oz. butane (10448)
Microtorch, table-top includes hot air tip (35387) and
1” diameter heat shrink attachment (35394)
35387
Specifications
Heat Reflector
35394
Approx. Flame Temp.: 2500° F • Approx. Run Time: Two Hours • Fuel
Tank: Plastic, Built-in, Refillable • Dimensions: 6.1" H x 3" W x 1.3" D
• Net Weight: 5 oz. • Shipping Weight: 1 lb. • Shipped Empty
•
Heat Shrink
NOTE: Users should independently evaluate the suitability
of the product for their application.
26
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Triggertorch™ Models MT-76 & MT-76K
Professional quality, hand-held or table-top, butane-powered,
self-igniting triggertorch, soldering iron and flameless heat tool
Gas adjustment wheel provides adjustable, long blue torch flame
with temperatures up to 2,500°F/1300°C
MT-76 includes soldering tip and hot air tip for soldering up to
752°F/400°C and heating up to 932°F/500°C
Self-igniting piezo electric ignition is easy to start and eliminates the
need for lighter or matches
Kit includes triggertorch, removable stand, 5” wire cutter,
5” needle nose pliers, soldering tip, hot air tip, shrink attachment,
polyfoam cutter, hot knife tip, roll 60/40 solder, and stand with
sponge packed in a durable plastic storage/carrying case
Incorporates “trigger” switch with “pulldown” lock to meet Consumer
Products Safety Commission (CPSC) Child Safety Requirements
“Hands-free” slide lock for continuous use and instant off operation
Unique shutter lever to easily extinguish ignition flame when using
soldering or hot air tip attachments
Ergonomic handle design ensures a non-slip grip
Removable base for table-top or hand-held use
2 hour continuous run time with a full charge
Durable self-contained, refillable plastic fuel tank
Refill with Master Ultratane Butane for best performance (page 28)
Use to heat parts, ignite materials, melt plastic, shrink tubing, solder
& desolder, terminate specialty connectors and more
MT-76K, 4 tools in 1
Open Flame Torch, Soldering Iron,
Flameless Hot Air and Hot Knife
US
Solder
Flameless Hot Air
2 Hour Run Time
C
US
MODEL NO. DESCRIPTION
MT-76
Triggertorch with table-top stand, soldering tip (35386)
& hot air tip (35387)
MT-76K
Triggertorch with table-top stand, soldering tip (35386),
hot air tip (35387), hot knife tip (35400), shrink attachment
(35394), polyfoam cutter (35396), 5” wire cutter, 5” needle nose
pliers, 60/40 solder and sponge packed in a durable plastic case
Solder TIp
Specifications
• Approx. Flame Temp.: 2500° F • Approx. Run Time: Two Hours • Fuel Tank:
Plastic, Built-in, Refillable • Dimensions: 6.5”H x 3.8”W x 1.3”D • MT-76 Weight:
7.6 oz. • Shipping Weight: 1 lb. • Shipping Weight Kit: 3 lbs. • Shipped Empty
NOTE: Users should independently evaluate the suitability
of the product for their application.
35386
Hot Air
Tip
MT-76, 3 tools in 1
Open Flame Torch,Soldering Iron
and Flameless Hot Air
www.masterappliance.com • sales@masterappliance.com
27
General Industrial Torch Model GT-70
Hand-held or table-top, butane powered, heavy-duty, general industrial torch
Self-igniting piezo electric ignition is easy to start and eliminates need
for lighter
Durable self-contained, refillable metal fuel tank
30 minute continuous run time with a full charge
Large sized adjustable blue flame accommodates heavy-duty industrial
applications with temperatures up to 2500°F/1300°C
Safety lock prevents unintentional ignition, locks for storage
Refill with Master Ultratane Butane for best performance
Meets Consumer Products Safety Commission (CPSC)
Child Safety Requirements
Use to braze with special alloy welding rods, heat and bend thin
metals, loosen rusted bolts, pop dents out of metal, shrink and
terminate heavy wall adhesive-lined tubing, solder and desolder
and more
US
C
MODEL NO. DESCRIPTION
GT-70
General Industrial Torch
US
Specifications
Approx. Flame Temp.: 2500° F Approx. Run Time: 30 Min. Fuel
Tank: Metal, Built-in, Refillable Dimensions: 6.5" H x 5" W x 1.8" D
Net Weight: 10.6 oz. Shipping Weight: 1 lb. Shipped Empty
NOTE: Users should independently evaluate the suitability of the product for their application.
Ultratane® Butane
For use with all Master butane-powered products
Recommended fuel for all Master butane-powered products
MADE IN
Triple-refined formula reduces clogging of filters
Special vapor pressure promotes consistent ignition
Contains no CFC’s
Available in two aerosol canister sizes: 51/8 oz. (145 gm) and 15/16
oz. (26.5 gm) and refillable RC-31 fuel cells
Model 10448 has proper D.O.T. markings to ship via ground
transportation without hazardous material charges
Model 51773 ships via ground transportation with hazardous
material charges
MODEL NO. DESCRIPTION
51773
51/8 oz. (145 gram) canister with universal tip adapter
15
10448
/16 oz. (26 gram) canister with universal tip adapter
RC-31
Refillable butane fuel cell. Carded 2 per card
RC-31 Fuel Cell
(for use with MT-11)
RC-31 has proper D.O.T. markings to ship via ground transportation without hazardous material charges
51773
51/8 oz.
10448
RC-31
15
/16 oz.
NOTE: Users should independently
evaluate the suitability of the product for
their application.
28
RC-31 is not considered a cigarette lighter
RC-31 is a refillable fuel cell to replace pre-childproof lighters
Refillable with Master Ultratane® Butane 51773 and 10448
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
PortaPro® Glue Gun
Cordless, butane-powered hotmelt glue gun
Completely portable, lets you work almost anywhere
Industrial power and durability
One touch, fast piezo ignition
Reaches operating temperature in less than 4 minutes
140 minutes continuous run time with a full charge
Fuel view window indicates fuel level
Refill with Master Ultratane Butane for best performance. (page 28)
Built-in fold away stand
Unlimited versatility
Use to bond corrugated materials, chipboard and wood, fasten
plastics, light metals, textiles, shock absorbent packaging, capacitors, resistors, soldered parts, electrical potting/staking parts on PC
boards and jumper wires, reseal products during packaging, and
glue down carpeting
MODEL NO. DESCRIPTION
GG-100
PortaPro Glue Gun
GG-100K
PortaPro Glue Gun Kit
US
GG-100 PortaPro Glue Gun
Includes glue gun, general purpose tip (35408)
and four general purpose 6” glue sticks
C
US
Accessories
PART NO.
35408
35409
35410
35411
35412
35413
35414
35454
35455
35456
DESCRIPTION
Standard general purpose tip
Needle extension tip
Diagonal cut extension tip
Spreader extension tip
12 General purpose glue sticks 12” long x 1/2” dia.
12 Carton closing glue sticks 12” long x 1/2” dia.
12 Woodworking glue sticks 12” long x 1/2” dia.
20 lbs. General purpose glue sticks (approx. 290 sticks)
20 lbs. Carton closing glue sticks (approx. 290 sticks)
20 lbs. Woodworking glue sticks (approx. 290 sticks)
Contact Master Appliance for glue stick specifications
GG-100K PortaPro Glue Gun Kit
Continuous use operating
times up to 140 minutes
Cordless operation
is fast and convenient
includes: glue gun, 4 tips, 8 general purpose 6” long glue
sticks & manual packed in a rugged storage case. Case
has slot to hold Master Butane (51773 not included)
Specifications
Operating Temp: Approx. 392°F/200°C Ramp Up Time: 3-4 minutes
Recommended Glue Stick: 1/2” Glue Melt Rate: up to 1.9 lbs. per
hour Ave. Run Time: Approx. 140 minutes (full tank) Fuel Capacity:
20 ml. Dimensions: 8.4” L x 2.1” W x 8.0” H Tool Net Weight: 14.8
oz. w/o fuel Shipping Weight Tool: 1.8 lbs. Shipping Weight Kit: 3
lbs. Shipped Empty
35408 Standard
General Purpose Tip
Dia. 4.47mm O.D.
35409 Needle
Extension Tip
7.8mm long
Dia. 3.2mm O.D.
35410 Diagonal Cut
Extension Tip
8.4mm long x 45°
Dia. 4.74mm O.D.
35411 Spreader
Extension Tip
7.6mm(L) x 6.6mm(W)
0.50mm I.D. slot
NOTE: Users should independently evaluate the suitability of the product for their application.
www.masterappliance.com • sales@masterappliance.com
29
MicroPro® AC MP-100
Standby
Soldering Iron
Personal electric soldering iron
Compact, lightweight, easy-to-use
Fingertip grip, just two inches from target, is ideal for precise work
Standby temperature mode reduces tip temperature during pauses
between soldering jobs for faster warm-up to full solder temperatures
Standby mode significantly extends tip life, (standby temp:
290°F/140°C, soldering temp: 1004°F (540°C)
Heating element is located in the solder tip for outstanding heat
transfer, heat up and recovery times - 14 watts maximum power
Green/red LED indicators for standby and operating modes
Perfect for use with today’s lead-free solder
Perfect personal soldering tool for R&D, electronic engineers
and repair technicians
MODEL NO. DESCRIPTION
MP-100
Micropro AC electric standby soldering iron
NOTE: Users should
independently evaluate
the suitability of the
product for their
application.
Optional Accessories
PART NO.
35430
35431
35432
35433
35434
35435
DESCRIPTION
.25mm conical tip
.50mm conical tip (std.)
1.6mm chisel tip
2.4mm chisel tip
1.0mm bevel tip
2.0mm bevel tip
PART NO.
35436
35438
35439
35440
35441
DESCRIPTION
Hot knife tip
AC/DC power adapter
Adapter cord
Protective cap
Stand/tip removal tool
MicroPro® BT-30
Specifications
Approx. Tip Life: 30,000 cycles (joints) Heater Type: ironplated anti-corrosion Solder tool dimensions: (with tip) 6.5"
L x .52" W (165mm L x 13.20 mm W), Adapter dimensions:
3" x 1.9" x .1.3" (75mm L x 48mm W x 35mm D) Tool
Weight: 1.1 oz. ( 30 grams ) Adapter Weight: 2.7 oz. ( 76.5
grams ) Shipping Weight: 1 lb. (454 grams)
Battery Powered Soldering Iron
Lightweight, compact, completely portable soldering iron
Standard tool includes 2 Ultratip® soldering tips (1-.5mm conical tip and
1-1.5mm chisel tip), tip removal wrench, and 3 AA Alkaline batteries
Lightweight and completely portable, equivalent to a 6W electric iron
Solders approximately 60 minutes continuous duty
Solders up to 160 joints intermittently with new batteries
Fast start-up, reaches 361° F (183° C) in 10 seconds
Total of 8 tips available (2 standard)
Top quality, plug-in solder tips incorporate built-in heater (patent pending)
Use to solder and desolder micro sized to small sized parts, perfect
for field service and repair work
35374
35372
35373
MODEL NO. DESCRIPTION
BT-30
Micropro battery-powered, portable soldering iron
Optional Accessories
PART NO.
35364
35367
35370
35365
35368
35371
DESCRIPTION
.5mm conical tip (std.)
1mm conical tip
1.5mm conical tip
.8mm spade tip
1.3mm spade tip
1.8mm spade tip
Specifications
PART NO.
35366
35372
35373
35374
35375
DESCRIPTION
1.0mm chisel tip
1.5 chisel tip (standard)
Tip remover
Protective cap
1.5V AA Alkaline
batteries, package of 4
Approx. Solder Tip Temp.: 6W (max) 932° F (500° C) Max. Solder Tip Temp.:
1040° F (560° C) Approx. Tip Life: 30,000 cycles (joints) Time to Reach
Operating Temp.: 361° F in 10 Sec. (183° C in 10 Sec.) Approx. Temp. Drop
When Touching Object: 212° F (100° C) Heater Type: Built-in, plug-in mounting, iron-plated anti-corrosion Approx. Run Time: 60 Min. Continuous w/New
Batteries Approx. No. of Solder Joints, Intermittently: 160 using New Batteries
Batteries: 3-1.5V Alkaline, AA Dimensions: 6.8" L x 1.4" W x .8" D (173mm L
x 35.5mm W x 20mm D) Net Weight: 3.8 oz. w/Batteries (105 grams
w/Batteries) Shipping Weight: 1 lb.
30
Conical Tip
35364
35367
35370
35373
Spade Tip
Chisel Tip
35365
35368
35371
35366
35372
35374
35375
NOTE: Users should independently evaluate the suitability
of the product for their application.
www.masterappliance.com • sales@masterappliance.com
Sealed Electrical Systems
Environmentally sealed connections create permanent repairs
Heavy Duty Trucking
Marine & RV
Plant Maintenance Departments
OEM & Automotive Aftermarket
Heavy Duty Equipment
Oil Fields & Mining
Municipalities & Military Bases
The past decade has seen the advent of sweeping technological advances
in the automotive, fleet, and marine industries. Many of these advances involve
improved electrical systems, controlled by miniature onboard computers.
Consequently, small variations in voltage can significantly affect vehicle
performance.
To combat these problems and increase longevity, the major manufacturers in these
industries are using completely
sealed electrical systems.
Unfortunately, the repair and maintenance industry is lagging behind.
The integrity of sealed electrical
harnesses is often breached when
repairs are made with inferior,
unsealed electrical connectors.
Master Appliance has the solution.
The heat shrink connector is the
innovative solution that allows
the aftermarket to keep pace with
changing technology. Each repair
made with a heat shrink connector is
individually protected from corrosion,
contaminant's and current leakage.
This ensures that the original integrity
of the wiring harness is maintained.
Sealed Electrical Systems
Seal Your Connectors!
Make Permanent Repairs!
Master Appliance high quality adhesive-lined
Heat-Seal Electrical Connectors are available
in three styles:
Multiseal™
Crimp, solder & heat-seal connectors
Solderseal™
Solder & heat-seal connectors
Proseal™
Crimp and heat-seal connectors
Resist water & condensation
Resist salt & other contaminant's
Resist wire pull out & current leakage
www.masterappliance.com • sales@masterappliance.com
31
Multiseal™ Electrical Connector Kits
High quality crimp, solder & heat-seal connectors
Crimped for mechanical reliability; soldered for strength and conductivity,
and heat sealed for superior durability
Prevents opening of connector barrel for stronger crimp
Low temperature pre-measured solder with flux for greater tensile
strength and superior current flow
10058
Uniform adhesive flow does not overflow onto terminal to impede contact
Heat shrink tubing does not reduce in length creating better insulation
along with superior wire support and strain relief
Translucent, adhesive-lined polyolefin shrink tubing – Allows visual
inspection, prevents wire corrosion, and provides a water and contaminant
resistant seal
Color-coded tubing with wire gauge imprint – Provides easy identification
of the correct part for the job
10067
Superior integrity of electrical systems – Sealed electrical systems
ensure the original integrity of wire connections and wiring harnesses
and conforms with OEM standards. 103 lbs tensile strength
slot for tools
Butt
Connectors
10058 - Multiseal Butt Splice Connector Minipak
Description
18-20 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
Qty
20
20
10
10066
3 items & 50 pieces
10067 Multiseal Connector Kit
Insulated
Couplers
Butt
Connectors
Spade
Terminals
Ring
Terminals
Description
18-20 AWG, Ring Terminal, #6 Stud, Red
18-20 AWG, Ring Terminal, #10 Stud, Red
14-16 AWG, Ring Terminal, #10 Stud, Blue
14-16 AWG, Ring Terminal, 1/4” Stud, Blue
14-16 AWG, Ring Terminal, 3/8“ Stud, Blue
10-12 AWG, Ring Terminal, #10” Stud, Yellow
10-12 AWG, Ring Terminal, 1/4“ Stud, Yellow
10-12 AWG, Ring Terminal, 3/8” Stud, Yellow
10-12 AWG, Ring Terminal, 1/2“ Stud, Yellow
18-20 AWG, Spade Terminal, #10, Red
14-16 AWG, Spade Terminal, #10, Blue
10-12 AWG, Spade Terminal, #10, Yellow
22-24 AWG, Butt Connector, Clear
18-20 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
18-20 AWG, Female Coupler, 1/4 Tab, Red
14-16 AWG, Female Coupler, 1/4 Tab, Blue
18-20 AWG, Male Coupler, 1/4” Tab, Red
14-16 AWG, Male Coupler, 1/4” Tab, Blue
5
5
5
5
5
5
5
5
5
5
5
5
5
10
15
10
5
5
5
5
Solder preform inside
10068
1. Strip wires 3/8" and insert into crimp
barrel of the connector
2. Crimp the wires in crimp
barrel.
3. Apply heat to the connector until
solder and adhesive flows and
tubing recovers. Allow the
connector to cool.
20 items and 120 pieces
Crimp
10066 - Multiseal Connector Kit with Tool Slot
10068 - Multiseal Connector Kit with UT-100Si & Crimper
Mechanical reliability holds wires in place
Insulated
Couplers
Butt
Connectors
Ring
Terminals
Description
18-22 AWG, Ring Terminal, #10 Stud, Red
14-16 AWG, Ring Terminal, #8 Stud, Blue
14-16 AWG, Ring Terminal, #10 Stud, Blue
14-16 AWG, Ring Terminal, 1/4” Stud, Blue
14-16 AWG, Ring Terminal, 3/8” Stud. Blue
10-12 AWG, Ring Terminal, #10 Stud, Yellow
18-22 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
10-12 AWG, Butt Connector, Yellow
18-20 AWG, Female Coupler, 1/4 Tab, Red
14-16 AWG, Female Coupler, 1/4 Tab, Blue
18-20 AWG, Male Coupler, 1/4” Tab, Red
14-16 AWG, Male Coupler, 1/4” Tab, Blue
14 items and 90 pieces
32
Crimp barrel inside
Qty
Qty
5
5
5
5
5
5
10
10
10
10
5
5
5
5
Solder
Ultimate tensile strength • Superior conductivity
Seal
Durable insulation • Watertight connection
Temperature rating:
-67°F to 230°F
-55°C to 110°C
Longitudinal change:
+1, -10%
Recovery temperature: 275°F/135°C
Dialectic strength:
900 Volts/Mil.
UL Voltage Rating:
600 Volts
Corrosion resistance: Non-corrosive
Fungus Resistance:
Non-nutrient
Water absorption:
<0.1%
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Solderseal™ Electrical Connector Kits
High quality solder & heat-seal connectors
High quality, sealed solder connection that takes the guess-
work out of soldering water tight connections
Low temperature pre-measured solder with flux for greater
tensile strength and superior current flow
Uniform adhesive flow does not overflow onto terminal
10056
to impede contact
Heat shrink tubing does not reduce in length creating better
insulation along with wire superior support and strain relief
Translucent, adhesive-lined polyolefin shrink tubing – Allows
visual inspection, prevents wire corrosion, and provides
a water and contaminant resistant seal
Ensures the original integrity of wire connections
and wiring harnesses and conforms with OEM standards
102 lbs tensile strength
10724
Butt
Connectors
10056 - Solderseal Butt Splice Connector Minipak
slot for tools
Qty
Description
22-24 AWG, Butt Connector, Red
18-20 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
10
15
15
15
4 items & 55 pieces
10729
10724 - Solderseal Connector Kit
Insulated
Couplers
Butt
Spade
Connectors Terminals
Ring
Terminals
Description
18-20 AWG, Ring Terminal, Red, #6 Stud
18-20 AWG, Ring Terminal, Red, #8
18-20 AWG, Ring terminal, Red, #10
18-20 AWG, Ring Terminal, Red, 1/4”
14-16 AWG, Ring Terminal, Blue, #8
14-16 AWG, Ring Terminal, Blue, #10
14-16 AWG, Ring Terminal, Blue, 1/4”
14-16 AWG, Ring Terminal, Blue, 3/8” Stud
10-12 AWG, Ring Terminal, Yellow, #10 Stud
10-12 AWG, Ring Terminal, Yellow, 1/4” Stud
10-12 AWG, Ring Terminal, Yellow, 3/8” Stud
10-12 AWG, Ring Terminal, Yellow, 1/2” Stud
Qty
5
5
5
5
5
5
5
5
5
5
5
5
18-20 AWG, Spade Terminal, Red, #10
14-16 AWG, Spade Terminal, Blue, #10 Stud
10-12 AWG, Spade Terminal, Yellow, #10 Stud
Solder preform inside
10725
5
5
5
22-24 AWG, Butt Connector, Clear
18-20 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
5
10
10
5
18-20 AWG, Slip-On Connector, Red, .250 Female
18-20 AWG, Slip-On Connector, Red, .250 Male
14-16 AWG, Slip-On Connector, Blue, .250 Female
14-16 AWG, Slip-On Connector, Blue, .250 Male
10-12 AWG, Slip-On Connector, Yellow, .250 Female
10-12 AWG, Slip-On Connector, Yellow, .250 Male
5
5
5
5
5
5
1. Strip wires 3/8" and slide the
connector over one of the wires.
Separate the wire strands.
2. Intermingle the wire strands
and slide the connector over
the joined wires.
3. Apply heat to the connector until
solder and adhesive flows and
tubing recovers. Allow the
connector to cool.
25 items and 135 pieces
Solder
10729 - Solderseal Connector Kit with Tool Slot
10725 - Solderseal Connector Kit with UT-100Si
Ultimate tensile strength • Superior conductivity
Insulated
Butt
Couplers Connectors
Ring
Terminals
Description
18-20 AWG, Ring Terminal, Red, #10
14-16 AWG, Ring Terminal, Blue, #10
14-16 AWG, Ring Terminal, Blue, 1/4”
14-16 AWG, Ring Terminal, Blue, 3/8” Stud
10-12 AWG, Ring Terminal, Yellow, #10 Stud
10-12 AWG, Ring Terminal, Yellow, 3/8” Stud
22-24 AWG, Butt Connector, Clear
18-20 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
Qty
5
5
5
5
5
5
10
10
10
10
14-16 AWG, Slip-On Connector, Blue, .250 Female
14-16 AWG, Slip-On Connector, Blue, .250 Male
5
5
Seal
Durable insulation • Watertight connection
Temperature rating:
Cut away of heated solder preform
Longitudinal change:
Recovery temperature:
Dialectic strength:
UL Voltage Rating:
Corrosion resistance:
Fungus Resistance:
Water absorption:
-67°F to 230°F
-55°C to 110°C
+1, -10%
275°F/135°C
500 Volts/Mil.
600 Volts
Non-corrosive
Non-nutrient
<0.1%
12 items and 80 pieces
www.masterappliance.com • sales@masterappliance.com
33
Proseal™ Electrical Connector Kits
High quality crimp & heat-seal connectors
The finest “Crimp & Heat-Seal” connector on the market today.
Better wire contact - Less voltage drop - Better current flow
Seamless butt connectors & brazed seam rings and spades –
Prevents opening of connector barrel for stronger crimp
Uniform adhesive flow does not overflow onto terminal
10054
to impede contact
Heat shrink tubing does not reduce in length, creating better
insulation along with superior wire support and strain relief
Translucent, adhesive-lined polyolefin shrink tubing – Allows visual
inspection, prevents wire corrosion and provides a water
and contaminant resistant seal
Color-coded tubing with wire gauge imprint – Provides easy
identification of the correct part for the job
10600
Superior integrity of electrical systems – Sealed electrical systems
ensure the original integrity of wire connections and wiring harnesses
and conforms with OEM standards. 89 lbs tensile strength
Butt
Connectors
10054 - Proseal Butt Splice Connector Minipak
Description
18-20 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
slot for tools
Qty
20
20
5
3 items & 45 pieces
10723
10600 Assortment Proseal Connector Kit
Insulated
Butt
Spade
Couplers Connectors Terminals
Ring
Terminals
Description
18-20 AWG, Ring Terminal, #6 Stud, Red
18-22 AWG, Ring Terminal, #10 Stud, Red
14-16 AWG, Ring Terminal, #8 Stud, Blue
14-16 AWG, Ring Terminal, #10 Stud, Blue
14-16 AWG, Ring Terminal, 1/4” Stud, Blue
14-16 AWG, Ring Terminal, 3/8” Stud. Blue
10-12 AWG, Ring Terminal, #8 Stud, Yellow
10-12 AWG, Ring Terminal, #10 Stud, Yellow
10-12 AWG, Ring Terminal, 1/4” Stud, Yellow
10-12 AWG, Ring Terminal, 3/8” Stud, Yellow
18-20 AWG, Spade Terminal, #10, Red
14-16 AWG, Spade Terminal, #10, Blue
10-12 AWG, Spade Terminal, #10, Yellow
18-22 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
18-20 AWG, Female Coupler, 1/4 Tab, Red
14-16 AWG, Female Coupler, 1/4 Tab, Blue
18-20 AWG, Male Coupler, 1/4” Tab, Red
14-16 AWG, Male Coupler, 1/4” Tab, Blue
Qty
5
5
5
5
5
5
5
5
5
5
5
5
5
10
10
10
5
5
5
5
20 items and 115 pieces
Crimp barrel inside
10719
1. Strip wires 1/4" and insert into crimp barrel
of connector.
10723 - Proseal Connector Kit with Tool Slot
10719 - Proseal Connector Kit with UT-100Si & Crimper
Insulated
Butt
Couplers Connectors
Ring
Terminals
Description
18-20 AWG, Ring Terminal, Red, #10
14-16 AWG, Ring Terminal, Blue, #8
14-16 AWG, Ring Terminal, Blue, #10
14-16 AWG, Ring Terminal, Blue, 1/4” Stud
14-16 AWG, Ring Terminal, Blue, 3/8” Stud
10-12 AWG, Ring Terminal, Yellow, #10 Stud
10-12 AWG, Ring Terminal, Yellow, 3/8” Stud
18-20 AWG, Butt Connector, Red
14-16 AWG, Butt Connector, Blue
10-12 AWG, Butt Connector, Yellow
14-16 AWG, Slip-On Connector, Blue, .250 Female
14-16 AWG, Slip-On Connector, Blue, .250 Male
12 items and 75 pieces
34
Qty
5
5
5
5
5
5
5
10
10
10
5
5
2. Crimp the wires in crimp barrel.
3. Apply heat until tubing recovers and adhesive
melts and flows.
Crimp
Mechanical reliability • Holds wires in place
Seal
Durable insulation • Watertight connection
Temperature rating:
Longitudinal change:
Recovery temperature:
Dialectic strength:
UL Voltage Rating:
Water absorption:
Corrosion resistance:
Fungus Resistance:
Water absorption:
-67°F to 230°F
-55°C to 110°C
+1, -10%
275°F/135°C
900 Volts/Mil.
600 Volts
<0.1%
Non-corrosive
Non-nutrient
<0.1%
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Heat-Shrink Tubing Kits
High quality heat-shrink tubing
Dual wall flexible heat-shrink
tubing with adhesive lining
Thin wall flexible heat-shrink
tubing with no adhesive
Polyolefin, 3 to 1 shrink ratio
Polyolefin, 2 to 1 shrink ratio
Self-extinguishing UL224 (except clear)
Self-extinguishing UL224 (except clear)
Highly flexible for conforming to irregular shapes
Internal layer of thermo-plastic adhesive provides
a barrier against contaminant's
Highly flexible for conforming to irregular shapes
10063
10065
10061
10062
10064
Qty
5
5
5
4
3
2
6 items and 24 pieces
Flexible
Shrink Tubing
10064 Flexible Adhesive-Lined Shrink Tubing Kit
Description
1/8” pre-shrink I.D., 6“ length, Black
1/8” pre-shrink I.D., 6“ length, Clear
3/16” pre-shrink I.D., 6“ length, Red
3/16” pre-shrink I.D., 6“ length, Black
3/16” pre-shrink I.D., 6“ length, Clear
3/16” pre-shrink I.D., 6“ length, Red
1/4” pre-shrink I.D., 6“ length, Black
1/4” pre-shrink I.D., 6“ length, Clear
1/4” pre-shrink I.D., 6“ length, Red
3/8” pre-shrink I.D., 6“ length, Black
3/8” pre-shrink I.D., 6“ length, Clear
3/8” pre-shrink I.D., 6“ length, Red
1/2” pre-shrink I.D., 6“ length, Black
1/2” pre-shrink I.D., 6“ length, Clear
1/2” pre-shrink I.D., 6“ length, Red
3/4” pre-shrink I.D., 6“ length, Black
3/4” pre-shrink I.D., 6“ length, Clear
3/4” pre-shrink I.D., 6“ length, Red
Qty
5
3
3
5
2
2
5
2
2
5
2
2
3
2
2
1
1
1
10061 Thin Wall Flexible Shrink Tubing Minipak
Flexible
Shrink Tubing
Description
1/8” pre-shrink I.D., 6“ length, Black
1/4” pre-shrink I.D., 6“ length, Black
3/8” pre-shrink I.D., 6“ length, Black
1/2” pre-shrink I.D., 6“ length, Black
3/4” pre-shrink I.D., 6“ length, Black
1”
pre-shrink I.D., 6“ length, Black
Description
3/16” pre-shrink I.D., 6“ length, Black
3/16” pre-shrink I.D., 6“ length, Red
1/4” pre-shrink I.D., 6“ length, Black
1/4” pre-shrink I.D., 6“ length, Blue
3/8” pre-shrink I.D., 6“ length, Black
3/8” pre-shrink I.D., 6“ length, Yellow
1/2” pre-shrink I.D., 6“ length, Black
3/4” pre-shrink I.D., 6“ length, Black
1”
pre-shrink I.D., 6“ length, Black
Qty
5
5
5
5
5
5
4
3
2
9 items and 39 pieces
10062 Thin Wall Flexible Shrink Tubing Kit
Flexible
Shrink Tubing
Flexible
Shrink Tubing
10063 Flexible Adhesive-Lined Shrink Tubing Minipak
Description
3/16” pre-shrink I.D., 6“ length, Black
3/16” pre-shrink I.D., 6“ length, Red
1/4” pre-shrink I.D., 6“ length, Black
1/4” pre-shrink I.D., 6“ length, Blue
3/8” pre-shrink I.D., 6“ length, Black
3/8” pre-shrink I.D., 6“ length, Yellow
1/2” pre-shrink I.D., 6“ length, Black
3/4” pre-shrink I.D., 6“ length, Black
1”
pre-shrink I.D., 6“ length, Black
Qty
20
15
20
10
10
10
10
5
3
9 items and 103 pieces
MIL-DTL-23053/5 Class 1 (colors) Class 2 (clear),
UL E35506 (except clear), CSA LR31929 (except clear),
Recovery temperature: 250°F/121°C, Dialectic strength: 900 Volts/Mil.,
Continuous operating temperature:-67°F to 275°F/-55°C to 135°C
18 items and 48 pieces
Flexible
Shrink Tubing
10065 Flexible Adhesive-Lined Shrink Tubing Kit
Description
1/8” pre-shrink I.D., 6“ length, Black
1/8” pre-shrink I.D., 6“ length, Clear
3/16” pre-shrink I.D., 6“ length, Black
3/16” pre-shrink I.D., 6“ length, Clear
1/4” pre-shrink I.D., 6“ length, Black
1/4” pre-shrink I.D., 6“ length, Clear
3/8” pre-shrink I.D., 6“ length, Black
3/8” pre-shrink I.D., 6“ length, Clear
1/2” pre-shrink I.D., 6“ length, Black
1/2” pre-shrink I.D., 6“ length, Clear
3/4” pre-shrink I.D., 6“ length, Black
3/4” pre-shrink I.D., 6“ length, Clear
Qty
10
10
8
8
6
6
4
4
3
3
2
2
12 items and 66 pieces
MIL-DTL-23053/4 Class 3
UL E157227
Recovery temp. 250°F/121°C,
Dielectric strength 700V/Mil.,
Continuous oper. temp. -67°F to 230°F/-55°C to 110°C
www.masterappliance.com • sales@masterappliance.com
35
Electrical Connector Kit Refills
Multiseal™, Solderseal™ & Proseal™ heat-seal electrical connectors
Part Number
Description
Multiseal Ring Terminals
18-20 AWG, Red, #6 Stud
11516
11573
18-20 AWG, Red, #6 Stud
11525
18-20 AWG, Red, #10 Stud
18-20 AWG, Red, #10 Stud
11576
11518
14-16 AWG, Blue, #10 Stud
14-16 AWG, Blue, #10 Stud
11568
14-16 AWG, Blue, 1/4" Stud
11519
11574
14-16 AWG, Blue, 1/4" Stud
14-16 AWG, Blue, 3/8" Stud
11520
11581
14-16 AWG, Blue, 3/8" Stud
11521
10-12 AWG, Yellow, #10 Stud
10-12 AWG, Yellow, #10 Stud
11569
11523
10-12 AWG, Yellow, 1/4" Stud
11582
10-12 AWG, Yellow, 1/4" Stud
10-12 AWG, Yellow, 3/8" Stud
11524
11570
10-12 AWG, Yellow, 3/8" Stud
10-12 AWG, Yellow, 1/2" Stud
11522
10-12 AWG, Yellow, 1/2" Stud
11575
Multiseal Spade Terminals
18-20 AWG, Red, #10 Stud
11517
11580
18-20 AWG, Red, #10 Stud
14-16 AWG, Blue, #10 Stud
11526
11583
14-16 AWG, Blue, #10 Stud
11527
10-12 AWG, Yellow, #10 Stud
10-12 AWG, Yellow, #10 Stud
11571
Multiseal Butt Connectors
11512
22-24 AWG, Clear Butt
11566
22-24 AWG, Clear Butt
11513
18-20 AWG, Red Butt
11572
18-20 AWG, Red Butt
11514
14-16 AWG, Blue Butt
11579
14-16 AWG, Blue Butt
11515
10-12 AWG, Yellow Butt
11567
10-12 AWG, Yellow Butt
Multiseal Female Slip-On Terminals
11528
18-20 AWG, Red
11577
18-20 AWG, Red
11530
14-16 AWG, Blue
11584
14-16 AWG, Blue
Multiseal Male Slip-On Terminals
11529
18-20 AWG, Red
11578
18-20 AWG, Red
11531
14-16 AWG, Blue
11585
14-16 AWG, Blue
Solderseal Ring Terminals
10772
18-20 AWG, Red, # 6 Stud
10811
18-20 AWG, Red, # 6 Stud
10773
18-20 AWG, Red, # 8 Stud
10812
18-20 AWG, Red, # 8 Stud
10774
18-20 AWG, Red, # 10 Stud
10813
18-20 AWG, Red, # 10 Stud
10775
18-20 AWG, Red, 1/4" Stud
10814
18-20 AWG, Red, 1/4" Stud
10779
14-16 AWG, Blue, # 8 Stud
10818
14-16 AWG, Blue, # 8 Stud
10780
14-16 AWG, Blue, # 10 Stud
10819
14-16 AWG, Blue, # 10 Stud
10781
14-16 AWG, Blue, 1/4" Stud
10820
14-16 AWG, Blue, 1/4" Stud
10783
14-16 AWG, Blue, 3/8" Stud
10822
14-16 AWG, Blue, 3/8" Stud
10784
10-12 AWG, Yellow, # 10 Stud
10823
10-12 AWG, Yellow, # 10 Stud
10785
10-12 AWG, Yellow, 1/4" Stud
10824
10-12 AWG, Yellow, 1/4" Stud
10787
10-12 AWG, Yellow, 3/8" Stud
10826
10-12 AWG, Yellow, 3/8" Stud
10788
10-12 AWG, Yellow, 1/2" Stud
10827
10-12 AWG, Yellow, 1/2" Stud
Solderseal Spade Terminals
10792
18-20 AWG, Red, # 10 Stud
10831
18-20 AWG, Red, # 10 Stud
10793
14-16 AWG, Blue, # 10 Stud
10832
14-16 AWG, Blue, # 10 Stud
10794
10-12 AWG, Yellow, # 10 Stud
10833
10-12 AWG, Yellow, # 10 Stud
Std.Pack
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
10
50
Solderseal Butt Connectors
10795
22-24 AWG, Clear
10
22-24 AWG, Clear
50
10834
10796
18-20 AWG, Red
10
18-20 AWG, Red
50
10835
14-16 AWG, Blue
10
10797
10836
14-16 AWG, Blue
50
10-12 AWG, Yellow
10
10798
10-12 AWG, Yellow
50
10837
Part Number
Description
Std.Pack
Solderseal Slip-On Connectors
10799
18-20 AWG, Red, .250 Female
10
10838
18-20 AWG, Red, .250 Female
50
18-20 AWG, Red, .250 Male
10
10801
10840
18-20 AWG, Red, .250 Male
50
10802
14-16 AWG, Blue, .250 Female
10
10841
14-16 AWG, Blue, .250 Female
50
10804
14-16 AWG, Blue, .250 Male
10
14-16 AWG, Blue, .250 Male
50
10843
10-12 AWG, Yellow, .250 Female
10
10805
10844
10-12 AWG, Yellow, .250 Female
50
10807
10-12 AWG, Yellow, .250 Male
10
10-12 AWG, Yellow, .250 Male
50
10846
Proseal Ring Terminals
10906
18-20 AWG, Red, # 6 Stud
10
18-20 AWG, Red, # 6 Stud
50
10658
10908
18-20 AWG, Red, # 10 Stud
10
10659
18-20 AWG, Red, # 10 Stud
50
10910
14-16 AWG, Blue, # 8 Stud
10
10648
14-16 AWG, Blue, # 8 Stud
50
10912
14-16 AWG, Blue, # 10 Stud
10
10649
14-16 AWG, Blue, # 10 Stud
50
10914
14-16 AWG, Blue, 1/4" Stud
10
10650
14-16 AWG, Blue, 1/4" Stud
50
10916
14-16 AWG, Blue, 3/8" Stud
10
10652
14-16 AWG, Blue, 3/8" Stud
50
10918
10-12 AWG, Yellow, # 8 Stud
10
10653
10-12 AWG, Yellow, # 8 Stud
50
10920
10-12 AWG, Yellow, # 10 Stud
10
10654
10-12 AWG, Yellow, # 10 Stud
50
10922
10-12 AWG, Yellow, 1/4" Stud
10
10655
10-12 AWG, Yellow, 1/4" Stud
50
10924
10-12 AWG, Yellow, 3/8" Stud
10
10657
10-12 AWG, Yellow, 3/8" Stud
50
Proseal Spade Terminals
10926
18-20 AWG, Red, # 10 Stud
10
10665
18-20 AWG, Red, # 10 Stud
50
10928
14-16 AWG, Blue, # 10 Stud
10
10663
14-16 AWG, Blue, # 10 Stud
50
10930
10-12 AWG, Yellow, # 10 Stud
10
10664
10-12 AWG, Yellow, # 10 Stud
50
Proseal Butt Connectors
10932
18-20 AWG, Red
10
10666
18-20 AWG, Red
50
10934
14-16 AWG, Blue
10
10667
14-16 AWG, Blue
50
10936
10-12 AWG, Yellow
10
10668
10-12 AWG, Yellow
50
Proseal Fully Insulated Slip On Connectors
10940
18-20 AWG, Red, .250 Female
10
10669
18-20 AWG, Red, .250 Female
50
10938
18-20 AWG, Red, .250 Male
10
10672
18-20 AWG, Red, .250 Male
50
10944
14-16 AWG, Blue, .250 Female
10
10671
14-16 AWG, Blue, .250 Female
50
10942
14-16 AWG, Blue, .250 Male
10
10673
14-16 AWG, Blue, .250 Male
50
10
50
10
50
10
50
Multiseal Patent Numbers:
Butt Connectors - US 6,838,621 B2, US 6,677,529 B1
Terminals - US 6,666,732,B1
36
Solderseal Patent Numbers:
Butt Connectors - US 4,883,925
Ring and spades - US 5,137,478
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Heat-Shrink Tubing Kit Refills
Thin and dual wall heat-shrink tubing
Master Heat® Guns or Butane-powered
portable heat tools, when used with
these flexible polyolefin connectors and
shrink tubing, create wireharness
repairs that meet OEM Standards.
Thin Wall Shrink Tubing 6" Long (NO ADHESIVE)
Shrink Tubing, 3/16", Black
10
11601
11602
Shrink Tubing, 3/16", Red
10
Shrink Tubing, 1/4", Black
10
11603
11604
Shrink Tubing, 1/4", Blue
10
11605
Shrink Tubing, 3/8", Black
10
Shrink Tubing, 3/8", Yellow
10
11606
11607
Shrink Tubing, 1/2", Black
10
11608
Shrink Tubing, 3/4", Black
10
Shrink Tubing, 1", Black
10
11609
Dual Wall Shrink Tubing 6" Long (WITH ADHESIVE)
11620
Shrink Tubing, 1/8", Black
8
Shrink Tubing, 1/8", Clear
8
11621
11622
Shrink Tubing, 1/8", Red
8
Shrink Tubing, 3/16", Black
8
11623
11624
Shrink Tubing, 3/16", Clear
8
11625
Shrink Tubing, 3/16", Red
8
Shrink Tubing, 1/4", Black
8
11626
11627
Shrink Tubing, 1/4", Clear
8
11628
Shrink Tubing, 1/4", Red
8
Shrink Tubing, 3/8", Black
8
11629
11630
Shrink Tubing, 3/8", Clear
8
11631
Shrink Tubing, 3/8", Red
8
11632
Shrink Tubing, 1/2", Black
8
Shrink Tubing, 1/2", Clear
8
11633
Shrink Tubing, 1/2", Red
8
11634
11635
Shrink Tubing, 3/4", Black
8
11636
Shrink Tubing, 3/4", Clear
8
Shrink Tubing, 3/4", Red
8
11637
11638
Shrink Tubing, 1", Black
8
Shrink Tubing, 1", Clear
8
11639
11640
Shrink Tubing, 1", Red
8
Crimping Tools
Hand tools for heat-seal electrical connectors
Cutter, Stripper, Crimper
Two precision-ground wire cutters: up-front anvil-type and
scissors-type located behind pivot point
Cuts,strips and crimps stranded wire in 22 to 10 AWG sizes
and solid wire in 18 to 8 AWG sizes
Cuts 6-32, 8-32, 10-32, 10-24 and 4-40 bolts and screws
Scissors action wire stripper is precision-ground for accuracy
and clean, neat stripping.
Cushioned handle for user comfort, made of heat-treated tool
steel for long life, reliability and accuracy
35083
MODEL NO. DESCRIPTION
35083
Cutter, Stripper, Crimper
Ratcheting Crimper
Crimps 22-18, 16-14 and 12-10 AWG size connectors
Rounded crimp die area for insulated terminals
Industry standard color-coded crimp numbers for easy size
identification
Full-cycle ratcheting handle ensures a complete crimp
Made from heat-treated steel for long life and reliability
35084
Cushioned handle for user comfort
MODEL NO. DESCRIPTION
35084
Crimp Tool, Ratcheting, Full Cycle
NOTE: Users should independently evaluate the suitability
of the product for their application.
www.masterappliance.com • sales@masterappliance.com
37
Master Heat™ Tools Factory Warranty
Every Master Heat Tool comes with a one year limited warranty
One Year Warranty
Master Heat Tools are carefully tested and inspected before being shipped from the factory.
We warrant our products to be free from defects in materials and workmanship, under normal
use and service, for one year from the date of purchase. In the event of a defect in materials or
workmanship we will either repair or replace, at our option, without charge any part which
in our judgement shows evidence of such defect.
Warranty does not apply to wearable items such as attachments, brushes, heating elements,
solder tips, heat tips, burners or ejectors, which require periodic replacement, nor does it apply
if the heat tool has been misused, abused, tampered with or altered.
At the end of the warranty period, Master Appliance shall be under no further obligation,
expressed or implied. Master Appliance assumes no responsibility for, and this warranty shall
not cover, any incidental or consequential damages from any defect in products or their use.
This warranty gives you specific rights. You may also have other rights which may vary from
State to State. Warranty information is included within the Instruction Manual for each product
or may be obtained by contacting Master’s Customer Service Department at 800-558-9413,
262-633-7791 or www.masterappliance.com.
Master heat tools are sold worldwide through a network of Authorized Stocking Distributors.
Trained Sales and Customer Service Representatives, located at our headquarters and throughout
the world, insure fast personal service.
Contact us for your nearest stocking distributor or sales representative.
Visit our website for up-to-date information on products, accessories, parts, warranty
and repair service.
38
Master Appliance Corp. • 2420 18th St. • Racine, WI 53403 • Phone 800-558-9413 • Fax 262-633-9745
Master Heat™ Tool Applications
Professional quality heat tools for Industry
Master Heat™ Tools
Applications/Processes
Heat has many industrial applications. The proper use of the
right heat technology and the right product are necessary to
achieve optimum results in each application.
Master heat tools are being used for hundreds of
applications and processes throughout industry including:
Master is continually developing new products and techniques
to meet the demands of new applications. Master heat guns
are designed and constructed to provide our customers with
dependable, cost-effective ways to apply heat properly for
specific jobs.
With over fifty years of experience in the industry, the Master
Appliance name assures its customers of an uncommon expertise in heat technology, quality products and
unsurpassed service.
Our original heat gun met the heating needs of the maintenance, repair, operation and production applications of its time.
Today’s Master heat tools are designed with expanded capabilities which make it easy to work with the growing range of new
materials and processes being developed by industry.
Master heat tools are used for drying, heating, welding,
shrinking, soldering and de-soldering as well as a variety of
other applications. Wherever heat is the need, Master has
the answer.
Because each application is unique, the Master heat tool line
offers options such as varying temperatures, air flow, a choice
of nozzle configurations, attachments and voltage/plug
combinations to meet your needs.
The introduction of new plastics, adhesives and other materials
is a continuous process. The range of options and attachments
offered by Master heat tools enables you to use the newest
materials and techniques while relying on the traditional Master
quality and durability.
Master is always here to help. When you’re considering a new
application, material or process, call Master Appliance for
professional, efficient and courteous assistance.
Activate adhesives and potting compounds
Bend and form plastics and plastic laminates
Cure and set adhesives
Defrost freezers and frozen coils
Dry body filler
Dry conformal coatings on circuit boards
Dry parts
Expand metals
General heating and drying applications
Desolder backs of printed circuit boards
to thru-hole components
PVC bending
Preheat flux
Remove dents in fiberglass and other materials
Remove pin striping
Remove/install plastic autobody panels
Remove windshield caulking
Shrink and terminate environmental splices
Shrink and terminate heat-shrinkable insulated
solder preforms
Shrink heat-shrinkable anti-static film
Shrink heat-shrinkable molded parts
Shrink heavy gauge shrink packaging
Shrink heavy wall and adhesive-lined tubings
Smooth vinyl tops
Soldering and desoldering
Spot dry paint
Stretch vinyls
Strip paint
Vinyl repair
New applications and processes which require heat are
discovered everyday. Users should independently evaluate
the suitability of the product for their application.
As with all electrical and butane-powered tools, for your
safety, read the instruction manual before using.
Product specifications are subject to change without notice.
www.masterappliance.com • sales@masterappliance.com
39
Worldwide Corporate Headquarters
Master Appliance Corp.
2420 -18th Street, Racine, WI 53403-2300 U.S.A.
Sales/Customer Service: 800-558-9413 (US & Canada)
Local and International: 262-633-7791
Fax: 262-633-9745
sales@masterappliance.com
www.masterappliance.com
For Master Appliance products contact:
© 2009 Master Appliance Corp. • Printed in USA • Catalog No. 58144 Rev. P