Samsung SP-C700R Product specifications

900 MHz Phone
SP-C700R
GG68-00405E
03/10. Rev.1.0
English Manual
Safety Precautions
The following is to ensure the user's safety and to minimize potential damages.
Carefully read the following guidelines and use in accordance with the instructions.
Note
Warning
Note
Never pull out the power plug by
pulling the line or when your
hands are wet.
When you see this sign, it indicates a
warning that something can cause death or
serious injury.
Do not fold the power line or
leave it under heavy objects.
● It can cause electric shock or fire.
● It can cause electric shock or fire.
This product is for 220V only.
Do not use for any other
voltages.
● It can cause electric shock or fire.
When you see this sign, it indicates a warning
that something can cause minor injury
or product damage.
Use only the designated
adapter.
● It can cause fire.
Always disconnect the Phone Jack
first before disconnecting the DC
Power Jack
of the adapter
from the phone.
● It can electric shock.
Always disconnect from the
power supply when cleaning.
Do not spray water and do not
use benzene, thinner or any other
alcohol while cleaning the phone.
● It can cause electric shock or fire.
Warning
Do not use damaged power lines
or loose plugs.
● It can cause electric shock or fire.
Do not disassemble or repair.
● It can cause electric shock, fire or
injury.
● If it needs repairing, please contact
our local service center.
If there is dust or water on the
power plug, wipe it off with a dry
cloth.
● Do not use water, as it can cause
electric shock or fire.
Do not pour water or any liquid
on the phone.
● It can cause electric shock or fire.
If you hear any weird or unusual
noises or smell anything weird,
immediately disconnect the
power line and call the service
center.
Do not dispose batteries into
a fire.
● It can cause an explosion.
● It can cause electric shock or fire.
1
2
Overview of Major Features
WIDE 900 MHz Phone
●
Here are some instructions concerning
various functions of the phone.
Base Set
Remote Set
page 28
Recent call function
Setting function
You can easily search and
redial the most recent numbers
you called without dialing them
up again.
(Up to 10 calls)
You can set and manage your own
settings for various phone
functions.
page 22
Morning call/alarm
function
This button will set an
alarm to sound at a
certain time.
Base set : Phone directory (20 phone numbers), recent calls (10 calls).
Remote set : Phone directory (10 phone numbers), recent calls (10 calls).
The phone directory is saved separately from the recent call function and the base
set and the remote set are controlled separately.
An illuminated
dial pad adds to your
convenience. It allows
you to dial phone
numbers even in dark
places.
You can easily carry
the remote set when
moving around.
page 23~26
Phone directory search
function
page 17, 19
Intercom function
You can easily switch
between an internal call
(intercom) with the base set
and an external call.
page 28
Recent call
function
You can easily search and redial
the recent numbers you called
without dialing them
up again. (Up to 10 calls)
page 23~26
Phone directory
search function
This helps you store or
search up to 20 phone
numbers.
This helps you store or search up to
10 phone numbers.
page 17~19
Intercom function
You can easily switch between an
internal call (intercom) with the base set
and an external call.
page 31
Noise reduction
function
It will detect a clear
channel when the call
has a bad connection
Setting function
You can manage settings for various
phone functions.
On Hook Dialing
You can make a call without
picking up the remote set.
3
4
Convenient features
Safety precautions
1
Overview of major features
3
Help functions
Convenient features for making calls
28
Selecting Pulse / Tone Dial Type
30
5
Deleting the recently dialed number
28
Noise reduction
31
Product information
7
Out of range warning
31
29
Phone installation
9
Blocking a user from making long
distance calls
Low voltage warning
31
Dialing another number after a call (Flash)
29
Adjusting the Flash Time
31
Pause function
30
Initializing the phone
32
Registering the remote set
33
Basic Features
13
Answering calls
14
Date / Time setting
15
Using the intercom function
17
Transferring calls
18
Changing the ringing melody and adjusting
the voice volume
20
Morning call / alarm setting
22
Using the phone directory
23
Reference
Troubleshooting
35
How to Clean
37
Product Specifications
38
Reference
Making calls
Convenient features
Redialing the recently dialed number
Basic features
Preparation & Installation
Table of contents / Components
Preparation & Installation
Table of Contents
Components
Base set
Base adapter
Phone line cord
Remote set
(DC 12V 500mA)
Charger
Charger Adapter
Battery
(DC 12V 500mA)
(DC 3.6V 450mAh)
User's manual
Warranty
card
● Please check the components.
● In case there is a problem with the components, please contact a retail shop where you made your purchase.
5
6
Product Introduction
Remote Set
� Use it for redialing the last number you called.
Antenna
Speaker
Preparation & Installation
Base Set
●Screen Displaying
� Use it for searching or registering numbers in
your own phone directory ( up to 20 numbers ).
� Use it for redialing the last
number you called.
� Use it to navigate upward when moving and
searching through the menu.
� Use it to navigate downward when moving and
searching through the menu.
Battery status
When out of range from the base set
� Use it for searching or
registering numbers in your
personal phone directory
( up to 10 numbers ).
Hook switch
When the line is busy with a call ( ) or
an extension call ( )
When searching or registering numbers
in your phone directory
Volume of receiving ring (2 levels)
� Use it for searching the order of
the most recent calls
� Use it for changing the function
setting ( e.g. bell type, device
number ).
Speaker
Volume of one's voice during a call (3 levels)
� Use it for turning on/off the
power.
� Use it for reducing
misconnected calls or noise.
� Use it for setting or canceling the
phone's features.
� Use it for confirming the function setting.
Use it for setting or
canceling the
morning alarm call.
� Use it for canceling functions.
� Use if for adjusting the volume of the ring
tone or speakerphone.
� Use it for deleting certain phone numbers
from the directory, recent calls or saved
numbers in searching phone numbers.
Use it for dialing
numbers without
picking up the
handset.
� Use it for calling, answering or
hanging up.
� Use it for setting or canceling the
phone's features.
� Use it for adjusting the ring
tone or the voice volume.
� Use it for either communicating
with the remote set or
transferring a call to
the remote set.
� Use it for making another call
without hanging up.
� Use it for either communicating with
the base set or transferring a call to
the base set.
� Use it for canceling a function.
� Use it for deleting the most recently
called numbers or saved numbers
in searching phone numbers.
� Use it for making another call
without hanging up.
Charger connector Microphone
Charger
Standby Screen
Call Restriction
Ring
Volume
Bell Off
Tone Dial
(indicator)
Morning call
7
Call Screen
Hour Minute
Speaker
phone
Volume
Call
indicator
Dial
(Phone
Number)
This shows you the duration of the call.
Charger connector
Power cable connector
(back side)
LED lamp for
recharging status
8
Installing the Base Set
Loading the battery to the remote set
Connect the phone line.
Open the
Place the
Rearrange the
picture.
shown in the
picture.
Close the
as
by setting 4 battery cover.
3 line
1 battery cover. 2 battery
shown in the
the battery as
DC 12V 500mA
Connect the power
plug to 220V.
� When you have finished installing the base set, press“On Hook ”button and check for a dial tone.
� If you cannot hear a dial tone, then check both the power and phone line connections.
� This product works for 220V.
How to use the battery
● Charge the battery for approximately 24
Installing the Remote Set
hours before using.
● Always remove the battery from the remote
DC 12V 500mA
Connect the power
plug to 220V.
set, when you are not using it for an
extended period.
● It is best to charge the battery until you see
the (
) sign on the screen.
Battery life
ÀÀ
;;
@@
€€
;;
@@
€€
ÀÀ
;;
@@
€€
ÀÀ
● The battery life has a 6-month warranty after
purchase.
● As time goes by, there will be a reduction in the
� Place the remote set on the charger and check if the lamplight is on.
� Press the call button and check for a dial tone.
� If you cannot hear the tone, check the installation.
battery's power. When battery's power capacity is
reduced by half, purchase a new battery and
replace it.
● Please contact your local Samsung Electronics
Service Center on how to purchase and replace
the battery.
To turn on / off the power
9
� To turn on the power: Press
button (hold for more than 2 seconds) until
you begin to hear the beeping sound.
� If it does not turn on when you press
button, then you probably
need to recharge the remote set. It should then automatically turn on.
Please recharge the battery for 24 hours before using it.
� If you do not charge the battery for at least 6 hours, then in order to
protect it, the battery must be fully charged or it will stop operating.
� To turn off the power: Press
buttons (hold for more than 3 seconds) until
you hear the beeping sound.
10
Preparation & Installation
Phone Installation
Basic Features
■ Making calls
13
■ Answering calls
14
■ Date / Time setting
15
■ Using the intercom function
17
■ Transferring calls
18
■ Changing the ringing melody and
11
adjusting the voice volume
20
■ Morning call / alarm setting
22
■ Using the phone directory
23
12
Making Calls
Answering Calls
Answering a Call with the Base Set
Making a Call with the Base Set
When using the base-handset
When using the On Hook
�
When hanging up the phone
�
Basic features
Press
button and dial the number
you want to call.
When calling in standby mode
Pick up the base-handset
and dial the number you
want to call.
�
You can get
a dial tone in
3 seconds.
�
● You can switch from pulse to tone mode by pressing
Place the handset down on
its position.
When the Phone Rings
Pick up the handset to answer
the call.
button during dialing.
● If you have incorrectly dialed the number in standby mode, you can delete a digit by pressing
button and
then pick up the handset or press 'On Hook' button.
What is "On Hook Dialing"?
� It is a very convenient feature. With it, you can first dial the number you want to call and then pick up the handset
to talk to the caller after identifying his/her voice through the speaker. (NB. If you don't pick up the handset, the
other side can't hear you.)
Making a Call with the Remote Set
When the remote set is placed
on the Charger
When the remote set is not
placed on the Charger
Answering a Call with the Remote Set
When hanging up the phone
Pull out the remote set from the
charger, press
button and dial
the number you want to call.
Press
button and dial the
number you want to call.
● You can switch from pulse to tone mode by pressing
Place the remote set on the charger
or pressing
button.
When the Phone Rings
Pull out the remote set from the
charger and press
button to
answer the call.
press
the call.
button to answer
button during dialing.
● You can dial the number before pressing
button.
● If you have incorrectly dialed the number in standby mode, you can delete a digit by pressing
13
When the remote set is not
placed on the charger
�
�
and then press
When the remote set is placed
on the charger
button
button.
14
Date/Time Setting
● You need to setup the Date/Time feature in order to see the current time and to use
the Morning Call/Alarm function.
● Only the hour and minute setting is available on the base set.
Setting up the Base Set
1
2
3
4
5
You will hear a
beep confirming
the completion
of the setting.
�Press 4 digits in the order of
hour, and minute.
Setting up with the Remote Set
1
2
3
4
5
Displaying
You will hear a
beep confirming
the completion
of the setting.
�Press 8 digits in the order of
day, month, hour, and minute.
In the case of a power failure or if you have deliberately disconnected the power,
the date and time will be erased. Therefore you will have to set it up once again.
15
16
Basic features
Displaying
Using the Intercom Function
Transferring Calls
● Separating from external calls, you can use intercom function between the base set
● While talking you can transfer the call either to the base set or to the remote set.
and the remote set. In this particular case the calls are not charged.
Calling from
1
to
2
How to transfer from
3
to
4
Remote set
Basic features
Base Set
1
Base Set
or
When the
internal call is
connected,
pick up the
handset to talk.
Base Set
While talking
When you hear it ringing
● In order to cancel the intercom during any call, simply press
�
button, or lift up the handset and place it back on
the hook.
Calling from
to
1
2
3
Remote set
Displaying of the
Internal call
Base Set
2
3
4
Place the handset on the
hook to hang up the call.
When you hear it ringing
Pick up the remote set and
press
button to
talk on the phone.
When you are
connected
through to the
person, talk on
the phone.
�When you hear it ringing,
pick up the handset.
● In order to cancel the intercom during any call, simply press
the charger.
17
te
No
or
button, or place the remote set on
● To cancel the transferring, simply pick up the handset.
● When an external call comes during an intercom talk,
button on the remote set to hang up the call
To answer by the base set → Press
To answer by the remote set → simply place the handset of the base set on its cradle to
transfer the call.
18
Transferring Calls
Changing the Ringing Melody and Adjusting the Voice Volume
(continued)
● You can adjust the type and volume of ring tone melodies as you please.
Base Set
to
1
2
Remote set
●Transferring from the
Selecting the Ringing Melody
1
3
2
remote set to the base set
Remote Set
While talking
�The current melody will
ring and the number of the
melody will be displayed.
●
4
5
5
Displaying
�
3
4
You will hear
a beep
confirming
the completion
of the setting.
�(Up to 10 available)
-- Silence.
Adjusting the Ring Volume
Adjusting Speaker/ Voice Volume
●You can adjust the volume to 3 levels (High/Medium/Low).
●The default setting is medium.
●The volume can be adjusted by 2 levels, Low and High.
●The original seting is Low.
or
Speaker Volume
After pressing the
button
Place the remote set on the
charger or press
button to
hang up.
Stand
by
When the phone rings
● To cancel the transferring, simply press
19
Press
Pick up the handset.
●
button.
button one after another.
In doing so, you can
switch the volume to
high, medium or low.
Press
Voice Volume
●
While talking into
the handset.
button one after another.
In doing so, you can
switch the volume to
high, or low.
20
Basic features
Transferring from
Changing the Ringing Melody and Adjusting the Voice Volume
(continued)
Morning Call/Alarm Setting
● First, set the current time (see page 15 for more details)
● You can only setup the morning call/alarm on the base set.
● When you set the morning call/alarm, it will give you a wakeup call at a certain time.
Remote Set
Selecting the Ringing Melody
3
2
4
1
5
Displaying
3
4
Displaying
Time Setting
2
You will hear
a beep
confirming the
completion of
the setting.
You will hear
a beep
confirming the
completion of
the setting.
�Press the search button
and select the ringing
melodies that you want
(Up to 10 available)
�You can select by
pressing
button
one after another.
�Press four digits in the
order to set up hours
and minutes.
● When you set the Morning call/alarm, it will automatically be enabled.
-- Silence.
●
Adjusting the Ring Volume
●The volume can be adjusted by 2 levels, Low and High.
●The original seting is High.
5
Adjusting the Voice Volume
●You can adjust the volume to 3 levels (High/Medium/Low).
●The original seting is Medium.
Setting or Canceling the Morning Call /Alarm
● When you cancel and reset the morning call/alarm,
Wait!
the time that was last set beforehand will be effective.
● When you set up your wakeup time, the morning
call/alarm is enabled. It will ring for up to 10 minutes.
● When the morning call/alarm is ringing,
Stand
by
Press
●
21
button one after another.
In doing so, you can
switch the volume to
high, or low.
During a
call After
pressing
button
Press
●
button one after another.
In doing so, you can
switch the volume to
high, medium or low.
if you want to turn it off, simply press any button on
the base set or lift up and then put down
the handset back on to the cradle.
Or press the call button on the remote set.
In standby mode, you can toggle between
setting and canceling using
button.
When it is active, the screen
of the phone displays an icon.
When the Morning
call/alarm is enabled
22
Basic features
1
Setting the Time on the Base Set
Using the Phone Directory
● You can register up to 20 phone numbers on the base set.
Registering a Phone Number (Using the Base Set )
1
2
3
Making a Call from the Phone Directory (Using the Base Set )
2
1
4
3
You will hear a
beep confirming
the completion
of the setting.
�Press
button.
�Press
button.
(You can use up to 20 digits)
�Press
button and select
the phone number you want
Press
button or pick up the handset.
Deleting Each of the Numbers in the Phone Directory (Using the Base Set )
2
1
Using a phone directory with an installed switchboard or an internal phone line.
3
In case of an installed switchboard or an internal phone, you can usually make external calls
by using an external switch number (mostly 9). When registering the phone number, enter a
pause between the external switch number and the phone number.
Example : To register
�
The selected
phone number
has been erased.
012-345-6789
�
�Press
button.
Searching the Phone Directory (Using the Base Set )
1
2
�Press
button and select
the phone number you want
Deleting All of the Numbers in the Phone Directory (Using the Base Set )
1
3
2
3
4
Displaying
All of the saved
phone numbers
have been erased.
�Press
button.
�Press
button to look up any of
the numbers that have been previously
saved.
● When the searching phone number has more than 12 digits, you can use
�Press
button to identify
button.
�Press
button
and hold for at least
3 seconds
● To cancel the deleting, simply press
button.
the rest of the number that is not displayed.
23
24
Basic features
Enter the phone number.
Using the Phone Directory (continued)
● You can register up to 10 phone numbers in the remote set.
Making a Call from the Phone Directory (Using the Remote Set )
Registering a Phone Number (Using the Remote Set )
1
2
1
5
4
3
2
3
You will hear a
beep confirming
the completion
of the setting.
�Press
button.
�Press
button
and select the phone
number you want
�Press
(You can use up to 20 digits)
button.
Basic features
Enter the phone number.
�Press
button and select
the phone number you want
Deleting Each of the Numbers in the Phone Directory (Using the Remote Set )
1
2
3
Searching the Phone Directory (Using the Remote Set )
1
2
The selected
phone number
has been erased.
3
Displaying
�Press
�Press
button.
�Press
button and select
the phone number you want
Deleting All of the Numbers in the Phone Directory (Using the Remote Set )
�Press
button to look up any of
the numbers that have been saved.
● When the searching phone number has more than 12 digits, you can use
button.
1
button to identify
2
3
4
the rest of the number that is not displayed.
All of the saved
phone numbers
have been erased.
�Press
button.
�Press
button
and hold for at least
3 seconds
● To cancel the deleting, simply press
25
button.
26
Convenient Features for Making Calls
You can call the recently dialed numbers without redialing by yourself.
To Redial a Number
1
Convenient Features
Base Set in
standby mode
�
Press
button
Press
Blocking a user from making long distance calls
Dialing another number after a call (Flash)
Pause function
button
�
Pick up the handset.
(You can press
button and
then pick up the
handset.)
Press
button to search for
the recently dialed numbers.
�
�
Remote Set in
standby mode
Deleting the recently dialed number
■ Help functions
�
28
Redialing the recently dialed number
3
�
Press
button to search for
the recently dialed numbers.
● The most recent numbers are stored in the memory (up to 10 numbers).
30
● Press
button of the base set in stand-by mode and pick up the handset to call the last dialed number.
● Press
button of the remote set in stand-by mode and press
button to call the last dialed
number.
Selecting Pulse / Tone Dial Type
Noise reduction
Out of range warning
To Delete the Recently Dialed Number
1
Low voltage warning
2
3
4
Adjusting the flash time
Initializing the phone
Registering the remote set
Base Set in
standby mode
�
Press
�
Press
27
button
�
The selected
phone number will
be erased.
�
�
The selected
phone number will
be erased.
Press
button to search for the
recently dialed number to delete.
button
Remote Set in
standby mode
�
Press
button to search for the
recently dialed number to delete.
28
Convenient features
■ Convenient features for making calls
2
Convenient Features for Making Calls
Convenient Features for Making Calls / Help Functions
To Block Long Distance Calls (Using the Base Set )
1
2
3
Dial Pause (Using the Base Set /Remote Set )
4
5
Displaying
�
Base Set in
standby mode
�
�
�
1
This function is used
for making external
calls within the
internal switchboard.
Base Set in
standby mode
3
�
~
4
�
�
(External switch number)
�
: Impossible to
button
make long-distance calls �Press
: Enable to
and select the phone
make a long-distance call
number you want
2
~
Select from
Press the button.
Press the number to dial.
Pick up the handset.
�
When you pick up the handset
When you press the
button
Remote Set in
standby mode
~
Select from
Base Set
�
~
�
�
(External switch number)
Press the button.
Press the number to dial.
Press
button.
by using an external switch number (mainly 9).
● When the restriction function is enabled, you can make a long distance call with the base set. And you will
also see
icon on top of the screen.
Selecting Pulse / Tone Dial Type (Using the Base Set)
● When the restriction function is enabled, you
can make a (long distance) call with the base
set. However, when you dial eight first on the
remote set, it will return to standby mode
instead of sending a call.
Remote Set
You can select from
pulse and tone
dial type.
1
Base Set in
standby mode
2
�
3
�
Dialing Another Number after a Call (Using the Base Set/Remote Set) (Flash)
You can make another
call without hanging up
after a call.
Convenient features
● In case of an installed switchboard or internal phone line, you can make external calls
Do not hang up
after finishing a call.
Press the number to dial.
Press for more
than 2 seconds.
Do not hang up
after finishing a call.
4
: Pulse Dial
: Tone Dial
5
�
You will hear a beep
confirming the completion
of the setting.
Press the number to dial.
Press for more
than 2 seconds.
● See page 31 for selecting the flash time.
�
�
�Press
button and select
the phone number you want
● The pulse dial is originally set. ▼:Pulse Dial, ▲:Tone Dial
● You can change the dial type only from the base set.
29
30
Help Functions
Help Functions
This is to initialize the phone to its original condition.
Noise Reduction (Using a Remote Set )
Initializing the Phone (Base Set / Remote Set )
1
2
�
When there is
a lot of noise
1
Press
2
3
∙If the noise is not reduced,
press the button several times.
Base Set in
standby mode
�
�
�
�
Out of Range warning with the Remote Set
1
4
Displaying
button
�
: Initialization set
: Initialization
cancelled
5
�
Press
All functions
will be
initialized with
a completion
sound.
button on the top.
2
This prevents a remote set
from being disconnected
from the base set.
�
When the remote set gets
too far from the Base set
Remote Set in
standby mode
You will see a
on the top
of the screen with a warning sound.
When this occurs, move closer
toward the base set.
Press the three buttons at the
same time and hold for at least
3 seconds.
All functions will be initialized
with a completion sound.
Convenient features
When there is a lot of noise,
or when the call has a bad
connection, you can use this
function to reduce irrelevant
noise by changing channels.
Low Voltage Warning in Remote Set
1
When the battery voltage of
the remote set falls below a
certain level, a warning is
given.
Default or Initial State
of the Phone
2
When a battery
needs recharging
�
You will hear a warning sound with
these
Base Set
marks blinking.
Adjusting the Flash Time
You can adjust the flash
time.
Remote Set
When this occurs, immediately
recharge your remote set.
1
2
3
4
5
Displaying
�
�
�
�
�Press
button to select
the flash time you want.
You will hear a
beep confirming
the completion
of the setting.
● Ring type : 1
● Ring type : 1
● Call Restriction : Cancel
● Ring volume : High
● Morning call / alarm time : 06:00
● Phone volume : Medium
● Ring volume : Medium
● Recently number : None
● Phone volume : Low
● Phone directory : None
● Recently number : None
● Date / Time : 01/ 01 24:00
● Phone directory : None
● Current time : 24:00
● Dial mode : Pulse
● Flash time : 100ms
● You can select the range of the flash time from 0.1 to 1.0 seconds.
31
32
Help Functions
Registering the Remote Set (Using Base Set / Remote Set)
2
Base Set in
standby mode
�
3
�
4
Displaying
�
5
�
~
1
6
�
�
Reference
Press the two digits
you want.
Remote Set in
standby mode
8
�
9
�
Displaying
10
�
11
�
~
7
12
�
Enter the same two
digits as you did in
the base set.
Wait a few
seconds and you
will hear a beep
confirming the
completion of the
registration.
■ Troubleshooting
35
■ How to Clean
37
■ Product Specifications
38
When registering the remote set, the number of the base set and the remote set
must be identical. In addition, it is recommended that you register the remote set
right after registering the base set.
ÀÀ
;;
@@
€€
;;
@@
€€
ÀÀ
;;
@@
€€
ÀÀ
33
34
Troubleshooting
●Is the phone correctly installed?
(Refer to page 9)
●Is the power correctly connected
to the appropriate voltage?
(Refer to page 9)
●Check if the batteries are
correctly inserted to the remote
set. (Refer to page 10)
●Check if the batteries are
adequately charged.
(Refer to page 10)
●Check if the power is on.
(Refer to page 9)
I cannot hear the tone
when I press
button.
●Check if the phone is correctly
connected.
(Refer to page 9)
●Check if the power is correctly
connected.
(Refer to page 9)
The morning call/alarm
does not work.
●Check if the current time is
accurately set.
(Refer to page 15)
●Check if the morning call
time is set.
(Refer to page 22)
●Check if the morning call/alarm
function is set.
(Refer to page 22)
Internal or transferring
calls are not working.
The phone does not ring in the
base set or the remote set.
I cannot recharge
the remote set.
●Check if you have installed the
phone correctly.
(Refer to page 9)
●Try re-registering the remote set
to the base set.
(Refer to page 33)
●Check if the batteries are
correctly inserted.
(Refer to page 10)
●Check if the batteries are
adequately charged.
(Refer to page 10)
●Check if the power of the remote
set is on. (Refer to page 9)
●Try re-registering the remote set
to the base set.
(Refer to page 33)
●Check if the BELL OFF is
selected. (Refer to page 21)
●Check if the charging connector
is clean.
●If the charging connector is not
clean, use a cotton tip or an
eraser to wipe it clean.
(Refer to page 37)
●Check if the power voltage is
appropriate. (Refer to page 9)
●If you have cleaned the charging
connector but it still does not
work, then please contact your
local service center and
purchase new batteries.
(Refer to page 10)
35
I hear many noises while
using the remote set.
●Press
button to reduce
the noise.
(Refer to page 31)
●Check if the distance is too far
from the base set.
(Refer to page 31)
●Try installing the base set at
a different location.
I hear beeping warning
sounds in the remote set.
●Check if the base set is currently
in use. Try again after the call in
the base set has been hung up.
●Check to see if you are too far
away from the base set. If yes,
move closer toward the base set.
(Refer to page 31)
●If you see the
mark on
the screen, hang up the phone
and adequately charge your
remote set.
(Refer to page 31)
● When there is a problem with radio communication between
the base set and the remote set, do the following, and if it
still will not work, then please contact your local Samsung
Electronics Service Center.
● Follow instructions in the order.
Base
Set
�
�
�
�
Remote
Set
�
�
�
�
Reference
The phone does
not work at all.
;;
@@
€€
ÀÀ
;;
@@
€€
ÀÀ
;;
@@
€€
ÀÀ
※ See page 33 for registering a remote set
36
How to Clean
When cleaning the outer
side of the phone.
Apply neutral washer liquid and
wipe it with a cloth.
●Do not use benzene, thinner, etc.
Product Specifications
When cleaning charger
Frequently wipe the charging
connector.
Model name : SP- C700R
Classification
Unit
Power
V
Remote Set
Base Set
Charger
DC 3.6 V, 450 mAh
DC 12 V, 500 mA
DC 12 V, 500 mA
for 220V
Rechargeable battery
When cleaning remote set
mW
Below 10
Frequency
kHz
Below 16
Receiving sensitivity
㎶
Below 2
Usage time for remote set
Hours
Stand by: over 20, Call: over 3
Operating temperature
℃
-10 ~ +40
Operating humidity
%
5 ~ 90
Weight
g
138
513
122
Dimension
(length*width*height)
mm
214×46×23
233×130×57
130×76×75
Reference
Frequently wipe the charging
connector.
Output
37
38
MEMO
MEMO
MEMO