Dolby Laboratories HSD 310 Operating instructions

Operating Instructions
Home Theater Audio System
Model No.
SC-HTR310
If you have any questions contact
1-800-211-PANA (7262)
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
P
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 1
RQTX0165-1P
7/16/2008 1:51:03 PM
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product's enclosure
that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE,
* DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
* USE ONLY THE RECOMMENDED
ACCESSORIES.
* DO NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The socket outlet shall be installed near the
equipment and easily accessible.
The mains plug of the power supply cord shall
remain readily operable.
To completely disconnect this apparatus from the
AC Mains, disconnect the power supply cord plug
from AC receptacle.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
HDMI, the HDMI logo and High-Definition Multimedia
important operating and maintenance Interface are trademarks or registered trademarks of
(servicing) instructions in the literature HDMI Licensing LLC.
accompanying the appliance.
HDAVI Control™ is a trademark of Matsushita Electric
Industrial Co., Ltd.
-If you see this symbolInformation on Disposal in other Countries outside
the European Union
This symbol is only valid in the
European Union.
If you wish to discard this product,
please contact your local authorities or
dealer and ask for the correct method
of disposal.
EZ Sync™ is a trademark of Matsushita Electric Industrial
Co., Ltd.
VIERA Link™ is a trademark of Matsushita Electric
Industrial Co., Ltd.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
2
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 2
7/16/2008 1:51:05 PM
Digital signals that can be played on this system
DVD etc.
Multi-channel LPCM
(Linear PCM)
PCM (2-channel)
CD, DVD audio etc.
Blu-ray disc, DVD audio etc.
(Signals with sampling
frequencies of up to 96 kHz)
(Signals with sampling
frequencies of up to 48 kHz)
Before use
DVD etc.
DTS
Digital signals that can be played on this system
Dolby Digital
Note
• Playback of the following signals is also available when you make HDMI connections. ( pages 17 and 28)
– PCM signals with sampling frequencies of over 96 kHz
– Multi-channel signals with sampling frequencies of over 48 kHz
 Depending on the connected equipment, the playback condition differs. (Playback may be impossible if not supported.)
See operating instructions of playback equipment for more information.
• See “Glossary” ( page 38) for more detailed information on each signal.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
3
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 3
7/16/2008 1:51:05 PM
Before use
Setting up your Home Theater system
Step
1
Installing the rack ( pages 10 to 15)
Setting up your Home Theater system
After you have installed the rack, attach the
glass top panel, shelf and glass doors.
Step
2
Connecting the television and DVD player
( page 16)
(Peripheral equipment and cables are not included unless otherwise mentioned.)
 Recommended TV size: 50 inches or less
Basic connection ( page 16)
Connect with an HDMI cable for high-quality audio and video.
This connection requires HDMI terminals on both the television and
the DVD recorder. ( page 17)
Step
3
Enjoying movies and music ( pages 24 to 27)
Enjoy surround sound with DVDs, TV, and
other sources.
 This system has built-in speakers.
Do not connect other speakers with the front speakers, center
speaker and subwoofer.
If you connect other speakers, the sound will not be produced with
proper characteristics and malfunction may occur.
4
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 4
7/16/2008 1:51:05 PM
Table of contents
Before use
Before use
Digital signals that can be played
on this system ................................................ 3
Setting up your Home Theater system ......... 4
Supplied accessories ..................................... 6
Control guide .................................................. 7
Remote control preparation .......................... 9
Installing and assembling the rack ............. 10
Home Theater connections ......................... 16
Connection
Connection
Basic connections............................................... 16
Connecting equipment with HDMI terminal (TV,
DVD recorder, etc.) ............................................. 17
Connecting with digital terminal-mounted
equipment .......................................................... 18
Connecting with VCR .......................................... 19
Other connections ........................................ 20
Connecting a set top box (cable or satellite) ... 20
Connecting a combination DVD recorder/VCR ... 21
AC power supply connection ...................... 22
Checking speaker output............................. 23
Enjoying movies and music ........................ 24
Sound field .......................................................... 26
Using the VIERA Link “HDAVI ControlTM” .. 28
Functions and settings ................................ 29
Reference
Play
Error messages ............................................ 35
Specifications ............................................... 35
Troubleshooting guide................................. 36
Product Service ............................................ 37
Glossary ........................................................ 38
Maintenance .................................................. 38
Limited Warranty .......................................... 39
Reference
Play
Using “WHISPER MODE SURROUND”............. 29
Using “GAME” .................................................... 29
Muting .................................................................. 29
Adjusting speaker output .................................. 29
REAL CENTER function ..................................... 30
Adjusting sound quality .................................... 30
Adjusting the balance ........................................ 30
Reducing standby power consumption
(Standby mode) .................................................. 31
Setting VIERA Link “HDAVI Control” to “OFF ” ... 31
Adjusting the time lag by delaying audio
output when pictures on TV arrives
after sounds ........................................................ 31
Switching between dual sounds ....................... 32
Clear audio at low volume ................................. 32
Switching the attenuator ................................... 32
Setting input signals .......................................... 33
Reset (factory settings) ..................................... 33
When other equipment (mini component
system, AV amp, etc.) manufactured by
Panasonic operate ............................................. 34
5
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 5
7/16/2008 1:51:07 PM
Supplied accessories
Before use
Please check and identify the supplied accessories.
Use numbers when asking for replacement parts.
(Product numbers correct as of June 2008. These may be subject to change.)
To order accessories, refer to “Accessory Purchases” on page 39.
Supplied accessories for rack
Supplied accessories
1 Glass top panel
(RXQ1618)
4 Caster stoppers (TBLB3008)
2 Glass doors
1 x Left (RXQ1607)
1 x Right (RXQ1608)
2 Screws
(XTW4+16AFJK)
Left side
2 Shelves
(RKQ2G0004-K)
Right side
8 Moulded dowels
(RMQ1649)
Supplied accessories for amplifier
1 AC power supply cord
(K2CB2CB00021)
2 Batteries
1 Remote control
(N2QAYB000288)
Packing plan
Glass top panel
Glass doors
Shelf
(Dotted line)
Other
supplied
accessories
Batteries
Remote
control
Rack
6
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 6
7/16/2008 1:51:11 PM
Control guide
Before use
This system
(Front view)
Control panel
(display)
Center speaker
Front speaker (right)
Subwoofer
(left)
Control guide
Front speaker (left)
Subwoofer
(right)
Caster
(Rear view)
Rear panel
Cut-outs
Amplifier
Cut-outs
7
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 7
7/16/2008 1:51:12 PM
Control guide
Before use
Control panel
For adjusting volume ( page 24)
VOLUME
Control guide
Standby/on switch
( pages 22 to 24)
ゲーム
( サウン
ド )
Standby indicator
( page 22)
WHISPER MODE INPUT
SURROUND SELECTOR
“INPUT SELECTOR”
switch ( page 24)
For using “WHISPER MODE SURROUND”
( page 29)
Display
When input signal is fixed to PCM ( page 33)
When input signal is digital
PCM
DIGITAL INPUT
DIGITAL DTS
VS
SFC
PL
When input signal is fixed to
DTS ( page 33)
Digital surround signal/Sound field ( below, pages 26 and 27)
General display
DIGITAL
DTS
VS
SFC
:
:
:
:
Dolby Digital sources
DTS sources
When Dolby Virtual Speaker is working
When you are using an SFC mode
: When Dolby Pro Logic decoder is being
used
(When using Dolby Virtual Speaker on
2 channel stereo source)
PLⅡ
Amplifier
AC inlet ( page 22)
Speaker terminals
Exhaust hole (Cooling fan)
Digital input terminal ( pages 17 to 21 and 28)
Audio input terminal
( pages 16, 17, 19 and 21)
HDMI terminal ( pages 17 and 28)
Speaker terminals
The speakers are already connected. Do not touch the connectors unless absolutely necessary.
If the connectors become disconnected, refer to the illustrations below for connection.
Connector connection
Green
Purple
8
Purple
Green
Red
White
White
Red
How to attach the connectors
Terminal block
Connector
Make sure the color on the connector
indicates the same as corresponding
terminal and insert the connector straight all
the way.
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 8
7/16/2008 1:51:16 PM
Before use
Input mode and remote control mode
buttons ( pages 24, 25 and 34)
Standby/on button ( pages 23 to 25)
Test signal output ( page 23)
Adjusting speaker output
( pages 23 and 29)
For using “WHISPER MODE
SURROUND” ( page 29)
For adjusting the volume
( pages 23 to 25)
For using “GAME”
( page 29)
Control guide/Remote control preparation
OR”
24)
Remote control
Muting ( page 29)
For adjusting settings/For activating
settings ( pages 29 to 34)
To enter setup mode
( pages 29 to 34)
For returning to the previous menu
( pages 29 to 34)
For selecting or cancelling
Dolby Virtual Speaker,
Dolby Pro Logic and SFC mode
( pages 26 and 27)
Remote control preparation
Inserting the batteries
Press on the tab to open.
(R6/LR6, AA)
Insert so the poles (+ and –) match those in the
remote control.
Do not:
• mix old and new batteries.
• use different types at the same time.
• take apart or short circuit.
• attempt to recharge alkaline or manganese batteries.
• use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which
can severely damage the remote control.
Remove the batteries if the remote control is not going to be
used for a long period of time. Store in a cool, dark place.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
• Do not use rechargeable type batteries.
• Do not heat or expose to flame.
• Do not leave the batteries in an automobile exposed to direct sunlight for a long period of time with doors and
windows closed.
Using the remote control
Remote control signal sensor
VOLUME
WHISPER MODE INPUT
SURROUND SELECTOR
Within 7 meters (23 feet) at
the front (actual distance
depends on the angle)
Transmission window
Note
• Do not place an object between the signal sensor and the
remote control.
• Do not place the signal sensor under direct sunlight or the strong
light of a fluorescent lamp.
• Keep the transmission window and the system’s sensor free
from dust.
9
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 9
7/16/2008 1:51:18 PM
Installing and assembling the rack
Shelf assembly ( page 12)
Glass door assembly ( page 15)
Connection
Glass top
panel
assembly
( page 12)
Speaker net
Setting the caster
stoppers
( page 14)
Installing each (DVD player/Blu-ray Disc player/DVD recorder  page 13)
equipment
(TV  page 13)
Installation
Installing and assembling the rack
 At least 2 people are necessary for installation.
 Use a Phillips-head screwdriver. (Do not use a powered screwdriver.)
 Choose a stable location for installation.
 Handle the glass top panel and glass doors with enough care.
Setup example
This system
This system
This system
• Make sure to place the rack on a flat, stable surface so there is no danger of it falling over. Take enough safety
measures to prevent the television from falling down.
• You can install this system so that it is flush with the wall at either the sides or back, but you will require some space
for working during setup and connection.
• Do not place in front of curtains as they may obstruct the system’s exhaust hole.
• Avoid pressing on the speaker nets during installation.
• If the surface of the wooden floor is soft, the caster mark may remain.
• See page 11 for removing casters.
Caution
• Use the supplied speakers only with our home theater audio system. Failure to do so can damage the amplifier and
speakers, and can cause fire.
• Consult a qualified service person if damage occurs or if performance worsens.
10
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 10
7/16/2008 1:51:20 PM
Removing casters
• Remove casters at unstable places. (thick-piled carpet,
uneven floor, etc.)
• Spread soft cloth on the floor and tip the rack back to
remove the casters.
• Hold and pull to remove.
• At least 2 people are necessary for removing casters.
• Make sure that at least 2 people hold the bottom plate
when moving the rack after removing the casters. See the
following instructions about how to lift the rack.
• Do not put anything on and in the rack when removing
casters. Do not put the included glass top panel either.
(Bottom plate)
Front side
Caster
Back side
Hold and pull.
How to lift the rack
 Lift the back side of the
top board and insert your
hand to the bottom of the
back side.
 Insert your hand to the
bottom of the front side.
 Lift the rack horizontally
using your both hands.
Connection
Soft cloth, etc.
Front side
Installing and assembling the rack
Back side
11
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 11
7/16/2008 1:51:30 PM
Installing and assembling the rack
Glass top panel assembly
1
Adjust the included glass top panel
so that it lines up with the protrusion
on the back of the rack.
Glass top panel
Nonslip
sheet
Protrusion
Sticker
Connection
• The glass top panel has the front side and back
side. Face up the front side with the sticker.
• The nonslip sheet has been put on the top panel of
the rack. Do not remove the sheet when installing
the glass top panel.
2
Put the glass panel down slowly to
make sure its aligned with the rear of
the top panel of the rack (as shown
in the diagram).
Top panel of the rack
(Side view)
Glass top panel
Top panel of the rack
Note
Installing and assembling the rack
Lift up and down slowly not to make an impact on the glass.
Shelf assembly
1
Insert the moulded dowel (included) into
the dowel hole on one side.
Hole
Moulded dowel
2
Insert the shelf (included) at an angle
and adjust it so that the shelf groove is
attached to the molded dowel.
3
Hold the shelf, insert the moulded dowel
into the dowel hole on the other side. Set
the shelf horizontally.
Groove (Under the shelf)
Shelf
• The height of the shelf can be adjusted at 3 different
levels.
• Change the position of the dowels to move the shelf up or
down.
• Insert the moulded dowel not to lose even when the shelf
is not set.
UNIT: mm (inches)
Dowel position
Upper
Middle
Lower
Upper shelf 101 (3 31/32”) 131 (5 5/32”) 161 (6 11/32”)
H
Lower shelf 101 (3 31/32”) 71 (2 25/32”) 41 (1 5/8”)
Compartment
W
448 (17 5/8”) (both L and R)
D
354 (13 15/16”)
12
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 12
7/16/2008 1:51:32 PM
Installing a DVD player/Blu-ray Disc player/DVD recorder or other equipment on
the shelf (Please also refer to the other equipment’s operating instructions.)
2
(Rear view)
Cut-outs
Big cut-outs
Connection
• Refer to pages 16 to 21 for connections with other
equipment.
• If the operating instructions of the equipment require heat
release or ventilation, remove the cut-out on the back
panel to secure ventilation.
• When setting equipment with the exhaust hole on the side,
follow the operating instruction of the equipment before
setting.
Push the black-circled
point.
Small cut-outs
Pull out the bundled cords of stored
equipment from the cut-outs for
connection.
Note
(Side view in cross section)
Shelf top
(Front view)
• Do not put equipment weighing more than 12 kg
(26.5 lbs) on the upper shelf or more than 20 kg
(44.1 lbs) on the lower shelf.
• Image interference may occur if you put a DVD
recorder, etc. on the upper shelf. Put it on the lower
shelf if this occurs.
• Depending on the equipment to install, the cables
The lowest level (on the floor panel)
may not be connected.
To install the equipment, adjust the height of the shelf Shelf top (dimension ): 348 mm (13 11/16”) 13(Maximum depth of
equipment when the big cut-outs part on the
to the position where the cables come out.
back panel is opened)
• If you set on the lowest level (on the floor panel), the
1
equipment with long depth may not be set properly or Shelf top (dimension ): 255 mm (10 /16”) (Maximum depth of
equipment
when
the small cut-outs part on
the equipment cord may not be taken out.
the back panel is opened)
• When installing equipment, refer to the table for “Shelf
The lowest level (on the floor panel) (dimension ):
assembly” on page 12.
255 mm (10 1/16”) (Maximum depth of
equipment)
Installing the television (Please also refer to the television’s operating instructions.)
Installing and assembling the rack
1
Press the cut-out on the back panel using
your thumb etc. with force to remove it for
wiring after installing the equipment.
Recommended: 50 inches or less
Place the television (with stand attached)
in the center of the rack.
Note
• Lift the television when placing it on the rack. Dragging it may
damage the top panel.
(For details, refer to the television’s operating instructions.)
• If the television stand adheres to the glass top panel too tight to
remove, lift the stand inserting a flat and thin object. This may help
removing the stand.
• Install the rotary television stand not to run over the rack even if it
rotates.
Television
stand
13
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 13
7/16/2008 1:51:35 PM
Installing and assembling the rack
Setting the caster stoppers
Set the caster stoppers (included) under
the casters to fix this system and prevent
from moving.
• When setting the caster stoppers, match the front side of
caster with the arrow of the caster stopper.
(Caster stopper position)
Set the caster stoppers under 4 casters circled with the
dotted line of figure below.
Front side
Front
Connection
Caster stopper
(Bottom side)
Arrow
• Lift the rack to remove caster stoppers. See page 11
about how to lift the rack.
Stabilising the television
Attach the television to the rack to prevent it from falling over.
Installing and assembling the rack
 Fixing to the rack
(Setup example)
• Attach the fall-prevention band etc. supplied with TV using
the included screws as illustrated at right. (If the fall-prevention band is not supplied with TV, use a commercially
available band to fix.)
Attach the fall-prevention band to the prepared hole in the
center of the underside of the top board.
If the hole is not positioned at a suitable place, drill
approx. 2 mm (3/32”) hole on the underside and attach the
band with the screw.
• If you fasten the screw too tightly, it goes around in circles
and the TV cannot be fixed.
 Fixing to the wall
• Use commercially available screws, strong string or chain
suitable for materials of the wall or pillar to fix to the solid
parts.
• Walls and pillars must be strong enough to support the
weight of TV. Ask installation personnel for more information.
• Fix 2 parts at both left and right.
Fall-prevention
band
Prepared
screw hole
Screw (included)
(Setup example)
The illustration is an example.
The shape may differ from the actual product.
14
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 14
7/16/2008 1:51:37 PM
Glass door assembly
Remove 4 screws from the glass holder
using a Phillips-head screwdriver and
take out the board.
Board
• Before taking out the board, remove the tape fixing the
glass holder.
• Use the Phillips-head screwdriver that matches the screw
size.
2
Phillips-head
screwdriver
Glass
holder
Insert the glass door (included) to the
glass holder firmly and tighten
the 2 screws in front tentatively.
• The illustration at right shows how to fix the left glass door.
• One side of the magnet catch has a hole.
This is the inner side of the glass.
• The slippage prevention sheet is pasted on the glass
holder inserting part on the surface of the glass door.
Fix as it is.
Screw
Magnet
catch
Screw
Hole
Inner side
of glass
Connection
1
Slippage prevention sheet
3
Close the glass door to adjust the height
and gap on both sides. Open the glass
door so it does not misalign and tighten
2 screws in front with the Phillips-head
screwdriver.
Inner side
of glass
Phillips-head
screwdriver
Screw
Screw
4
Tighten 2 screws at the back firmly.
• Install the other glass door in the same way.
Inner side
of glass
Phillips-head
screwdriver
Screw
Installing and assembling the rack
Screw
15
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 15
7/16/2008 1:51:39 PM
Home Theater connections
Basic connections
Connection cable
Stereo connection cable (not included)
• Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.
Connection
TV
Connect the video
directly from the
other equipment to
the television.
Home Theater connections
Audio out
R L
Use this connection
so audio from the
equipment can be
heard through the
television’s speakers
even if this system is
in standby mode.
VIDEO IN
AUDIO IN
Amplifier
Video
cable
Audio
cable
DVD player etc.
VIDEO
OUT
AUDIO
OUT
Reduce the volume on the television and select “TV ” after you have done connections as
above if you want to use this system.
16
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 16
7/16/2008 1:51:40 PM
• Turn off all components before making any connections.
• To connect equipment, refer to the appropriate operating
instructions.
Connecting equipment with HDMI terminal (TV, DVD recorder, etc.)
Connection cable
Stereo connection cable
(not included)
HDMI cable (not included)
Optical fiber cable (not included)
HDMI cable notes
• Use a Panasonic HDMI cable for best results.
Make the connection either  or  according to
the suitability for your equipment.
HDMI input
Connection
Audio out
R L
TV
Digital audio
out (optical)
Note the
shape and fit
it correctly
into the
terminal.
Do not
bend!
Amplifier
Home Theater connections
Connecting the optical
fiber cable
io
e
Blu-ray Disc player/DVD
recorder, etc.
HDMI
Video/Audio out
17
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 17
7/16/2008 1:51:42 PM
Home Theater connections
Connecting with digital terminal-mounted equipment
Connection cable
Optical fiber cable (not included)
Coaxial cable (not included)
• Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.
Connection
TV
Connect the video
directly from the
other equipment to
the television.
Digital audio
out (optical)
VIDEO IN
Use this connection
so audio from the
equipment can
be heard through
the television’s
speakers even if
this system is in
standby mode.
AUDIO IN
Home Theater connections
Connecting the optical fiber
cable
Amplifier
Note the shape
and fit it
correctly into the Do not
terminal.
bend!
Video cable
Audio
cable
DVD player etc.
Digital audio out
(optical)
Digital audio out
(coaxial)
VIDEO OUT
AUDIO OUT
Make the connection either  or  according to the suitability for your
equipment.
18
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 18
7/16/2008 1:51:44 PM
• Turn off all components before making any connections.
• To connect equipment, refer to the appropriate operating
instructions.
Connecting with VCR
Connection cable
Stereo connection cable (not included)
Optical fiber cable (not included)
Digital audio
out (optical)
Connect the video
directly from the
other equipment to
the television.
Use this connection
so audio from the
equipment can
be heard through
the television’s
speakers even if
this system is in
standby mode.
VIDEO IN
AUDIO IN
Connecting the optical fiber
cable
Note the shape
and fit it
correctly into the Do not
terminal.
bend!
Amplifier
Video cable
Audio
cable
Home Theater connections
TV
Connection
• Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.
VCR etc.
VIDEO OUT
AUDIO OUT
R L
Audio out
19
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 19
7/16/2008 1:51:45 PM
Other connections
Connecting a set top box (cable or satellite)
Connection cable
Coaxial cable (not included)
Optical fiber cable (not included)
Connection
• Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.
Connect the video
directly from the
other equipment to
the television.
Other connections
VIDEO IN
TV
Use this
connection so
audio from the
equipment can
be heard through
the television’s
speakers even if
this system is in
standby mode.
Digital audio
out (optical)
AUDIO IN
Amplifier
Video
cable
Audio
cable
Connecting the optical fiber
cable
Note the
shape and fit it
correctly into
the terminal.
VIDEO
OUT
Do not bend!
AUDIO
OUT
Digital
audio
out
(optical)
Cable box or
satellite receiver, etc.
Digital audio out
(coaxial)
DVD player etc.
20
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 20
7/16/2008 1:51:47 PM
• Turn off all components before making any connections.
• To connect equipment, refer to the appropriate operating
instructions.
Connecting a combination DVD recorder/VCR
Connection for equipment with DVD/VCR terminal.
Connection cable
Stereo connection cable (not included)
Optical fiber cable (not included)
TV
Connect the video
directly from the
other equipment to
the television.
Digital audio
out (optical)
AUDIO IN
Other connections
VIDEO IN
Use this
connection so
audio from the
equipment can
be heard through
the television’s
speakers even if
this system is in
standby mode.
Connecting the optical fiber
cable
Note the
shape and fit it
correctly into
the terminal.
Do not
bend!
Video cable
Amplifier
Combination DVD
recorder/VCR
R L
Audio out
DVD/
VCR out
terminal
Digital
audio out
(optical)
DVD out
terminal
Connection
• Refer to the operating instructions for the equipment you are connecting for the correct type of video cable.
VIDEO
OUT
Audio
cable
AUDIO
OUT
Note
See page 25 for playback.
21
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 21
7/16/2008 1:51:48 PM
AC power supply connection
Connect AC power supply cord after all other cables are connected.
AC power supply connection
Connection
Amplifier
AC power supply cord
(included)
Household AC outlet
(AC 120 V, 60 Hz)
Note
• The included AC power supply cord is for use with this system only. Do not use it with other equipment.
• Also, do not use AC power supply cord for other equipment with this system.
Conserving power
This system consumes a small amount of power, even when it is in standby mode (approx. 0.7 W). To save power when the system
is not to be used for a long time, unplug it from the household AC outlet. You will need to reset some memory items after plugging in
this system.
“Standby” indicator
Standby/on switch [8]
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
Standby indicator
VOLUME
WHISPER MODE INPUT
SURROUND SELECTOR
Standby/on switch
Standby indicator [^]
When the unit is connected to the AC mains supply, this indicator lights
up in standby mode and goes out when the unit is turned on.
22
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 22
7/16/2008 1:51:49 PM
Checking speaker output
You can check audio output with a test signal
1. Press
to turn on the system.
2. Press
to output the test signal.
Speaker
3. Press
to adjust the volumes of
• Test signal is output from one speaker at a time for two seconds in the following
order.
L (Front left) → C (Center) → R (Front right) → SUBW (Subwoofer)
4. Press
to stop the test signal.
Connection
front speakers to the normal listening level.
Checking speaker output
Note
Check connections when the speaker does not have output the test signal. ( page 8)
Adjusting speaker output
If you feel the output of the center speaker and subwoofer are not balanced with front speakers adjust the speaker
output according to your preference.
1. Output the test signal. ( above step 1 to 3)
2. Press
to select a speaker for adjustment.
SUBW (Subwoofer) → C (Center)
3. Press
to adjust each speaker’s output level.
• The test signal comes from the speaker being adjusted.
• Test signal is output again in above order 2 seconds after adjustment.
4. Press
to stop the test signal.
Adjustment range:
SUBW:
C:
OFF, MIN,
1 to 19, MAX
− 6 to + 6
Note
• To adjust the front speaker volumes, press [VOL –, +]. To adjust the volume balance of left and right front speakers, see
“Adjusting the balance”. ( page 30)
• When you select “OFF ” for subwoofer adjustment, there is no output from the subwoofer.
• Even if you adjust each channel level in this adjustment, each channel level setting in each SFC mode does not change.
• When you make this adjustment, Dolby Virtual Speaker functions. When playing 2-channel sources, Dolby Pro Logic also works
in conjunction. ( pages 26 and 27)
• You can adjust the speaker level while playing movies and music. ( page 29)
23
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 23
7/16/2008 1:51:53 PM
Enjoying movies and music
Preparation Turn on the television and switch its input to match the connection (HDMI, for example) using
Enjoying movies and music
television remote control.
Play
Control panel
Operation on the control panel
1
Turn on the system
2
Select the source.
Press
VOLUME
ゲーム
( サウン
ド )
Press
(The input source
switches each time you
press the button.)
INPUT
SELECTOR
WHISPER MODE INPUT
SURROUND SELECTOR
TV
BD/DVD
(factory setting)
AUX 1
AUX 2
AUX 3
Control panel
3
4
: TV
: Blu-ray Disc player/
DVD recorder
: AUX1 terminal
: AUX2 terminal
: AUX3 terminal
Start play on the other
equipment.
Adjust the volume.
Press
VOLUME
24
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 24
7/16/2008 1:51:56 PM
 See page 3 for digital signals that can be played on this system.
1
To turn on the system
2
To select the source
or
Press one of these
buttons.
(factory setting)
TV
BD/DVD
AUX 1
AUX 2
AUX 3
or
Enjoying movies and music
Press the button.
: TV
: Blu-ray Disc player/
DVD recorder
: AUX1 terminal
: AUX2 terminal
: AUX3 terminal
 “AUX 1”, “AUX 2” and “AUX 3”
switch every time you press [AUX].
3
4
Start play on the other equipment.
 You can enjoy the variety of surround effects. ( pages 26 and 27)
To adjust the volume
Press the buttons.
0 (Min) to 50 (Max)
Play
 After playback, reduce the volume level and turn off.
Note
• Depending on the playback source, you may feel the volume of the subwoofer or center speaker is not balanced with
the volume of the front speakers. In this case, you can adjust the speaker volume during playback. ( page 29)
• Even if you switch input to sources other than “BD/DVD ”, images (or audio) of the equipment connected to BD/DVD
terminal are output from TV output terminal.
Enjoying images and audio when this system is OFF
• When image equipment such as TV and recorder is connected to this system via HDMI ( page 17), images/audio
signals from the recorder go through this system and are transmitted to TV even if this system is turned off. (Standby
through function) This is convenient to enjoy only with TV speaker.
• Images recorded with x.v.Color ( page 38) are also supported.
Note
When you turn this system off, the audio/video signals from a recorder connected to this system’s BD/DVD HDMI input terminal
are output through the television, even if you have set input on this system to anything other than “BD/DVD ”. (The selector
returns to the previous setting when you turn this system on again.)
Playing a DVD recorder with built-in VCR
If the equipment has the output terminal specifically for DVD/VHS, select input as described in step 2
above.
• To enjoy DVD: select “AUX 1 ”.
• To enjoy video: select “AUX 3 ”.
25
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 25
7/16/2008 1:51:59 PM
Enjoying movies and music
The effects for sound field differ depending on input source. Select the mode you prefer.
Sound field
 Dolby Virtual Speaker
You can enjoy surround effects just like 5.1 channel. (Dolby Pro Logic
sources.) Dolby Virtual Speaker has the following modes.
works with video cassettes or CD stereo
REFERENCE (Standard mode)
Standard sound effect.
WIDE (Wide mode)
Broadens the effect to the left and right.
Enjoying movies and music
 Dolby Pro Logic
You can enjoy 2-channel sources including CD with the surround effect.
 SFC (Sound Field Control)
You can add presence and spread to surround sound according to your choice when you use SFC with Dolby Digital,
DTS, stereo sources (video, CD, etc.). SFC has the following modes.
Play
MUSIC
MOVIE
LIVE
Imparts the reflection and spread of a
large concert hall.
DRAMA
Best suited for dialogs in drama movies.
POP/ROCK
Best suited for dynamic sound such as
pop and rock music.
ACTION
Best suited for action movies with
impact.
VOCAL
Best suited to enhance vocals.
SPORTS
Enjoy a feeling like being at a live
sporting event.
JAZZ
Enjoy sound reflections as if you were
in a small Jazz club.
MUSICAL
Enjoy a feeling like being at a live
musical performance.
DANCE
Enjoy a dance hall like audio effect.
GAME
Enjoy games with greater audio impact.
MONO
Best suited for older monaural audio
movies.
Note
• See page 8 about how to display the surround digital signal/sound field.
PL ].
• If the input source is 2-channel, Dolby Virtual Speaker also works in conjunction by pressing [
• SFC is not available for multi-channel LPCM signal.
• You cannot use Dolby Virtual Speaker, Dolby Pro Logic and SFC when the source contains PCM signals with
sampling frequencies of over 48 kHz. They are automatically cancelled if those signals are input. To use the effect
when playing back other sources, press [
VIRTUAL SPEAKER], [
PL ] or [SFC MUSIC, MOVIE] again to
select.
• You can also press [GAME] on the remote control to select “GAME ” mode ( above) of SFC. ( page 29)
• When sound field is cancelled, the previous condition before sound field is cancelled returns by changing input
source, turning the system ON/OFF, or switching input.
• This system supports 7.1 channel LPCM signals.
You can enjoy wider sound field effects when playing back.
The following display appears when 7.1 channel LPCM signals arrive.
26
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 26
7/16/2008 1:52:00 PM
Using Dolby Virtual Speaker
• The mode switches each time you
press the button. ( page 26)
Press
Using Dolby Pro Logic
Press
Using SFC (Sound Field Control)
You can enjoy by adding your favourite surround effect in addition to the Dolby Virtual Speaker
( above) effect.
• The mode switches each time you
press the button. ( page 26)
Press
 To cancel SFC mode
Enjoying movies and music
VS
PL
Press
Play
Cancelling sound field
Press
• The surround effects disappear for 2-channel sources such as CD and TV.
• The surround digital signals which input sources are Dolby digital or DTS and multichannel LPCM signals are converged to 3.1-channel and the signals are output from
the left and right front speakers, center speaker and subwoofer.
27
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 27
7/16/2008 1:52:02 PM
Using the VIERA Link “HDAVI ControlTM”
Using the VIERA Link “HDAVI ControlTM”
What is VIERA Link “HDAVI Control” ?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system,
and a Panasonic TV (VIERA) or DVD recorder (DIGA) under “HDAVI Control”. You can use this
function by connecting the equipment with the HDMI cable. See the operating instructions for
connected equipment for operational details.
• VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that we have developed and added. As such, its operation with other
manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
• This system supports “HDAVI Control 3” function.
“HDAVI Control 3” is the newest standard (current as of December, 2007) for Panasonic’s HDAVI Control compatible equipment.
This standard is compatible with Panasonic’s conventional HDAVI equipment.
• Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.
You can enjoy the following by using the remote control of TV (VIERA)
 You can select “Speaker Selection” (“Home Cinema” or “TV”).
Home Cinema: This system will be automatically turned on if it is in standby mode and the sound is from this
system’s speaker. You can also adjust the volume level by using the volume control buttons.
TV: TV speakers are active.
 When you switch off the TV (VIERA), this system automatically turns off.
When VIERA Link “HDAVI Control” compatible recorder (DIGA) is connected with HDMI cable, the recorder (DIGA)
also turns off.
Note
• When you operate the TV (VIERA) such as selecting a channel this system’s input selector will automatically switch to
“TV”
• When you operate DIGA DVD recorder, this system’s input selector will automatically switch to “BD/DVD ”.
• To operate other functions, use this system’s remote control.
Connection
Play
Connect your home theater equipment (VIERA Link “HDAVI Control” compatible VIERA television and DIGA DVD
recorder) with an HDMI cable.
• It is recommended that you use Panasonic’s HDMI cable. Non-HDMI-compliant cables cannot be utilised.
Recommended part number: RP-CDHG10 (1.0 m/3.3 ft), RP-CDHG15 (1.5 m/4.9 ft), RP-CDHG20 (2.0 m/6.6 ft),
RP-CDHG30 (3.0 m/9.8 ft), RP-CDHG50 (5.0 m/16.4 ft), etc.
• Only with HDMI cable connection, you cannot enjoy TV sounds on this system. Connect TV to this system with the
optical fiber cable to enjoy TV sound.
Digital audio
out (optical) Amplifier
HDMI
OUT
HDMI IN
TV (VIERA)
DVD recorder
(DIGA)
Setup




Switch on all your equipment.
Switch on your television (VIERA).
Switch television (VIERA) input to HDMI terminal that this system is connected to.
Ensure that this system’s input is set to “BD/DVD ” in order to view pictures from DIGA correctly.
Note
This setup should be done each time when the following conditions occur:
• for the first time
• when adding or reconnecting equipment
• when changing setup
When not using this function
Set VIERA Link “HDAVI Control” to “OFF ”. ( page 31)
28
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 28
7/16/2008 1:52:04 PM
Functions and settings
Press
 To cancel
Press again.
If cancelled, “W.S. OFF ” is displayed.
You can enjoy dynamic
surround effect even
when the sound volume
level is low.
VOLUME
ゲーム
( サウン
ド )
WHISPER MODE INPUT
SURROUND SELECTOR
Press
[WHISPER MODE
SURROUND] indicator
• When this function is on, [WHISPER MODE
SURROUND] indicator lights up on the control panel.
Note
• WHISPER MODE SURROUND cannot be used in the
following cases.
When Dolby Virtual Speaker is off
If the above setting is made when this function is on,
[WHISPER MODE SURROUND] indicator disappears and
this function temporarily becomes off.
Using “GAME”
Press
Enjoy gaming with more
impact.
• “GAME ” mode ( pages 26 and 27) in SFC is selected.
Muting
Press
Functions and settings
Using
“WHISPER MODE
SURROUND”
This setting can be made on control panel as well.
Control panel
 To cancel
Press again.
If cancelled, SFC’s effect itself is cancelled.
Press again.
“MUTING IS ON ” scrolls  To cancel
across the display while • Muting is cancelled when you switch the system to standby.
the volume is muted.
• Muting is also cancelled when you adjust the volume.
to select a speaker for adjustment.
Play
1 Press
(The speaker is switched each time you press the
button.)
SUBW (Subwoofer) → C (Center)
Adjusting speaker
output
2 Press
to adjust each speaker’s
Depending on the
output level.
playback source, you
Adjustment range: SUBW: OFF, MIN,
may feel the volume of
1 to 19, MAX
the subwoofer or center
− 6 to +6
C:
speaker is not balanced
with the volume of the
Note
front speakers. In this
case, you can adjust the • To adjust the volume balance of the front speakers, see
speaker volume during
“Adjusting the balance”. ( page 30)
playback.
• There is no output from the subwoofer if you select
“OFF”.
• If the sound is distorted, lower the level.
• You cannot adjust the output level of speakers if the
speakers’ audio output is set to off. ( pages 26 and 27)
• You can adjust the speaker’s output level in SFC’s each
mode respectively. ( pages 26 and 27)
29
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 29
7/16/2008 1:52:07 PM
Functions and settings
1 Press and hold
2 Press
REAL CENTER
function
Makes the dialog from
the center speaker
clearer when playing
surround sources.
Functions and settings
Factory setting is “ON”.
See right to set it “OFF”.
for about 2 seconds.
to select “REAL C.”.

Press
confirm.

REAL C., BASS, TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
 Only appears when audio adjustment can be made.
3 Press
to select “OFF”.
ON, OFF
• Select “EXIT” and confirm
to finish the setup mode.
Press
to
confirm.
Factory setting: ON
• The effect changes as soon as you select “ON” or “OFF” but you must press [OK] to confirm
selection.
4 Press
a few times to select
Press
confirm.
“EXIT”.
You can adjust the level
of bass and treble.
Play
Input signals must be
2 channel of either
analog or PCM.
This setting is not
displayed in other
conditions. Make sure
the above setting is
made before setup this
function.
1 Press and hold
2 Press

Press
confirm.
to
Press
confirm.
to
Press
confirm.
to
• Select “EXIT”
and confirm to
finish the setup
mode.
 Only appears when audio adjustment can be made.
3 Press
to adjust range.
Adjustment range: –6 to +6
4 Press
a few times to select
“EXIT”.
 Return to previous menu/cancel.
2 Press
You can adjust the
balance of the front
speakers.
L: Front speaker (left)
R: Front speaker (right)

REAL C., BASS, TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
1 Press and hold
Adjusting the
balance
for about 2 seconds.
to select “BASS”
or “TREBLE”.
to
Press
 Return to previous menu/cancel.
Adjusting sound
quality
to
“BALANCE ”.
Press
for about 2 seconds.
Press
confirm.
to select


REAL C., BASS, TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
to
• Select “EXIT” and
confirm to finish the
setup mode.
 Only appears when audio adjustment can be made.
3 Press
to adjust the
balance.
4 Press
a few times to select
“EXIT”.
 Return to previous menu/cancel.
Press
confirm.
to
Press
confirm.
to
Use the bar as a guide.
Press
30
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 30
7/16/2008 1:52:13 PM
1 Press and hold
Reducing
standby power
consumption
2 Press
for about 2 seconds.
to select “HDMI”.


REAL C., BASS, TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
(Standby mode)
Press
confirm.
to
Press
confirm.
to
Press
confirm.
to
• Select “EXIT” and confirm
to finish the setup mode.
Standby through function
( pages 25 and 38)
does not work in this
mode if you have
connected through the
HDMI terminal.
VIERA Link “HDAVI
Control” ( page 28) will
not function when this
system is off.
3 Press
to select “STNBY”.
STNBY, CTRL
4 Press
to select “OFF”.
OFF : Standby power consumption reduced
(approx. 0.3 W)
ON : Normal standby power consumption
5 Press
“EXIT”.
a few times to select
 Return to previous menu/cancel.
1 Press and hold
2 Press
Functions and settings
 Only appears when audio adjustment can be made.
Factory setting: ON
Press
confirm.
to
Press
confirm.
to
Press
confirm.
to
Press
confirm.
to
Press
for about 2 seconds.
to select “HDMI”.


REAL C., BASS, TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
• Select “EXIT” and confirm
to finish the setup mode.
3 Press
to select “CTRL”.
STNBY, CTRL
4 Press
to select “OFF”.
OFF : When the operation is not linked
ON : When the operation is linked
5 Press
a few times to select
“EXIT”.
 Return to previous menu/cancel.
1 Press and hold
2 Press
Adjusting the time
lag by delaying
audio output
when pictures on
TV arrives after
sounds
Play
 Only appears when audio adjustment can be made.
Setting VIERA Link
“HDAVI Control” to
“OFF”
Factory setting: ON
Press
confirm.
to
Press
confirm.
to
Press
for about 2 seconds.
to select “TV DELAY”.


• Select “EXIT” and confirm
REAL C., BASS, TREBLE, BALANCE, HDMI, TV DELAY,
to finish the setup mode.
DUAL PRG, DRCOMP, ATTENUATOR, REMOTE, INPUT MODE,
RESET, EXIT
 Only appears when audio adjustment can be made.
3 Press
to select setting.

AUTO , OFF, 10, 20, 30, 40
 For only combination with Panasonic TV
(VIERA) Supporting HDAVI Control 3.
4 Press
a few times to select
“EXIT”.
 Return to previous menu/cancel.
Press
to
confirm.
Factory setting: AUTO
Press
confirm.
Press
to
31
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 31
7/16/2008 1:52:17 PM
Functions and settings
1 Press and hold
2 Press
for about 2 seconds.
Press
confirm.
to select
to
“DUAL PRG”.


• Select “EXIT” and confirm
REAL C., BASS, TREBLE, BALANCE, HDMI,
to finish the setup mode.
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
 Only appears when audio adjustment can be made.
Switching between
dual sounds
Functions and settings
You can switch
between dual sounds of 3 Press
Dolby Digital signals.
to select the sound.
M1: Main audio, M2: Sub channel audio output,
M1+M2: Main + Sub channel audio output
4 Press
“EXIT”.
a few times to select
 Return to previous menu/cancel.
1 Press and hold
Clear audio at low
volume
Play
Dynamic range
compression for Dolby
Digital
2 Press
Press
confirm.
to
for about 2 seconds.


• Select “EXIT” and confirm
REAL C., BASS, TREBLE, BALANCE, HDMI, TV DELAY,
to finish the setup mode.
DUAL PRG, DRCOMP, ATTENUATOR, REMOTE, INPUT MODE,
RESET, EXIT
 Only appears when audio adjustment can be made.
to select setting.
OFF: Normal playback; STANDARD: The level
recommended by the producer of the software for
household viewing; MAX: The maximum allowable
compression (recommended for night viewing)
 Return to previous menu/cancel.
1 Press and hold
2 Press
for about 2 seconds.
Press
confirm.
“ATTENUATOR”.

REAL C., BASS, TREBLE, BALANCE, HDMI, TV DELAY,
DUAL PRG, DRCOMP, ATTENUATOR, REMOTE, INPUT MODE,
RESET, EXIT
 Only appears when audio adjustment can be made.
3 Press
to select “ON”.
ON, OFF
4 Press
“EXIT”.
to
Press
to select

Press
to
confirm.
Factory setting: OFF
Press
confirm.
a few times to select
“EXIT”.
Switch the attenuator
“ON ” when big sounds
become distorted while
playing an analog input
source.
to
Press
to select “DRCOMP”.
It compresses the
3 Press
dynamic range so that
you can still hear dialog
and leave the sound
field unaffected. Use
this function when you
have to turn the volume
down, such as late at
4 Press
night.
Switching the
attenuator
Press
confirm.
a few times to select
 Return to previous menu/cancel.
to
• Select “EXIT” and confirm
to finish the setup mode.
Press
to
confirm.
Factory setting: OFF
Press
confirm.
to
Press
32
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 32
7/16/2008 1:52:19 PM
2 Press
for about 2 seconds.
to select “INPUT
Press
confirm.
to
Press
confirm.
to
Most sources can be


• Select “EXIT” and
REAL C., BASS, TREBLE, BALANCE, HDMI,
played with “AUTO ”
MODE”.
confirm to finish the
TV
DELAY,
DUAL
PRG,
DRCOMP,
ATTENUATOR,
(factory setting).
setup mode.
REMOTE, INPUT MODE, RESET, EXIT
However, in the
 Only appears when audio adjustment can be made.
following cases,
change the input signal
to select source.
3 Press
detection setting.
Press
to
● When the beginning
confirm.
TV, DVD, AUX1, AUX2
of the song is cut
during playback of
to select input signal.
4 Press
Press
to
CD, set to “PCM ”
confirm.
(PCM FIX).
AUTO : Automatic detection
● When the signal is
PCM : PCM (from CDs) digital input fixed
Factory setting: AUTO
not detected during
DTS : DTS digital input fixed
playback of DTS
ANLG (TV only): Fixes the input signal to analog
sources, set to
DIG (TV only): Fixes the input signal to digital
“DTS ” (DTS FIX).
● You can fix the
 Repeat steps 3 and 4 to change setting.
signal type (digital or
analog) supplied by 5 Press
a few times to select
Press
to
TV.
“EXIT”.
confirm.
When noise occurs,
return the setting to
“AUTO ”.
 Return to previous menu/cancel.
1 Press and hold
Reset
(factory settings)
The operation settings
for the system will
be initialised to the
settings made at the
time of shipment.
2 Press
Press
Functions and settings
1 Press and hold
for about 2 seconds.
to select “RESET”.


REAL C., BASS, TREBLE, BALANCE, HDMI,
• Select “EXIT” and
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
confirm to finish the
REMOTE, INPUT MODE, RESET, EXIT
setup mode.
 Only appears when audio adjustment can be made.
3 Press
to select “YES”.
YES, NO
Press
confirm.
to
Play
Setting input
signals
• All the settings are reset when you select “YES” and the input selector automatically switches to
“BD/DVD”.
• If you select “NO”, you will return to step 2. To exit setup mode, press [RETURN] a few times to
display “EXIT”, and then press [OK].
33
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 33
7/16/2008 1:52:21 PM
Functions and settings
When other equipment (mini component system, AV amp, etc.) manufactured by Panasonic operate
When using this system’s remote control, other equipment may operate. In this case, switch this system’s remote
control code to “REMOTE 1”. Do the following to set the same code number for this system and remote control.
1. Press and hold
2. Press
for about 2 seconds.
Press
to select “REMOTE”.


REAL C., BASS, TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
to confirm.
• Select “EXIT” and confirm
to finish the setup mode.
Functions and settings
 Only appears when audio adjustment can be made.
3. Press
to select the number.
Press
1, 2
to confirm.
Factory setting: 2
• The remote control code on this system is set.
• You cannot finish the setting mode until the setting on the remote control is changed. Go to step 4.
4. While pressing
, press and hold
or
for about 2 seconds.
TV: Remote control code 1
BD/DVD: Remote control code 2 (factory setting)
• The remote control code on the remote control is set.
• Select the same number as the code number you have selected in step 3.
a few times to select
Press
to confirm.
Play
5. Press
“EXIT”.
34
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 34
7/16/2008 1:52:23 PM
Error messages
Display
Check point/Cause/Countermeasure
Pages
• Set the same remote control code for this system and remote control.
If “REMOTE 2” is displayed, set remote control code to “2”.
If “REMOTE 1” is displayed, set remote control code to “1”.
34
• The equipment connected by the HDMI cable is not compatible with this
system’s copyright protection technology.
—
• The system is receiving video signals that are incompatible with it through
HDMI connection. Check the settings of the connected equipment.
—
• A problem has occurred with the HDMI connection. Try the following to correct
the problem. Consult your dealer if the error code remains on the display.
― Turn the connected equipment off and on again.
― Disconnect the HDMI cable then reconnect it.
― Do not connect more than 2 equipment in series to the output of this system.
—
—
—
• You cannot use Dolby Virtual Speaker, Dolby Pro Logic
sounds.
and SFC for dual
32
• You cannot use Dolby Virtual Speaker, Dolby Pro Logic
PCM signals with sampling frequency over 48 kHz.
• SFC is not available for multi-channel LPCM signal.
and SFC effect with
26
(Scrolling)
26
(Scrolling)
Specifications
 OPERATING CONDITIONS:
Operating temperature range: 0°C to +40°C (+32°F to +104°F)
Operating humidity range: 20% to 80% RH (no condensation)
 GENERAL
Power supply
Power consumption
Main set
Standby (HDMI ON)
Standby (HDMI OFF)
AC 120 V, 60 Hz
 SPEAKER SYSTEM
FRONT (L/R)
1-Way 1 Speaker System (Bass Reflect)
6.5 cm (2 1/2”) Cone Type Full Range x1
Input power (IEC)
70 W (Max/4Ω)
Output sound pressure level
79 dB/W (1.0 m)
Frequency range
80 Hz - 25 kHz (-16 dB)
95 Hz - 22 kHz (-10 dB)
CENTER
1-Way 1 Speaker System (Bass Reflect)
6.5 cm (2 1/2”) Cone Type Full Range x1
Input power (IEC)
70 W (Max/4Ω)
Output sound pressure level
79 dB/W (1.0 m)
Frequency range
80 Hz - 25 kHz (-16 dB)
95 Hz - 22 kHz (-10 dB)
SUBWOOFER
1-Way 2 Speaker System (Bass Reflect)
13 cm (5 1/8”) Cone Type Woofer x2
Input power (IEC)
90 W (Max/3Ω)
Output sound pressure level
82 dB/W (1.0 m)
Frequency range
35 Hz - 600 Hz (-16 dB)
42 Hz - 500 Hz (-10 dB)
 RACK SYSTEM
(INCLUDING SPEAKER)
Dimensions (W x H x D)
1300 mm x 444 mm x 458 mm
(51 1/8” x 17 15/32” x 18 1/32”)
Mass
approx. 50kg (110.2 Ibs)

Mass is a Completed (AMP, Speaker Unit inc)
Maximum Loading Weight
80 kg (176.4 Ibs)

Error messages/Specifications
68 W
0.7 W
0.3 W
Rating with low-cut filter equipped amplifier
Note
Reference
 AMPLIFIER SECTION
RMS Output Power of each channel driven
10 % total harmonic distortion
1 kHz Front CH
70 W per channel (4 Ω)
1 kHz Center CH
70 W per channel (4 Ω)
100 Hz Subwoofer CH
90 W per channel (3 Ω)
Total RMS Output Power
300 W
Rated minimum sine wave RMS power output
1 % total harmonic distortion (Dolby Digital Mode)
120 Hz - 20 kHz Front CH
45 W per channel (4 Ω)
120 Hz - 20 kHz Center CH
43 W per channel (4 Ω)
45 Hz - 120 Hz Subwoofer CH
57 W per channel (3 Ω)
Total FTC Output Power
190 W
Rated minimum sine wave RMS power output
1 % total harmonic distortion (Stereo mode)
120 Hz - 20 kHz Front CH
47 W per channel (4 Ω)
45 Hz - 120 Hz Subwoofer CH
57 W per channel (3 Ω)
Total FTC Output Power
151 W
Total harmonic distortion
half power at 1 kHz (Front CH)
0.5 % (4 Ω)
Input sensitivity
TV, AUX 3
450 mV, IHF’66
S/N at rated power
BD/DVD, TV, AUX 1, AUX 2
80 dB
Input impedance
TV, AUX 3
47 kΩ
Tone controls
BASS
50 Hz, +6 dB to -6 dB
TREBLE
20 kHz, +6 dB to -6 dB
Digital input/output
HDMI Input
1
HDMI Output
1
Optical digital input
2
Coaxial digital input
1
This system supports “HDAVI Control 3” function.
Analog input/output
Analog audio input
2
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum
analyser.
35
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 35
7/16/2008 1:52:25 PM
Troubleshooting guide
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,
refer to “Customer Services Directory” on page 39.
Problem
Possible solution
No power.
• Ensure the AC power supply cord is connected.
No sound or image after
playback starts.
• Select the correct source.
• Turn the muting off.
• Check that the digital signals can be decoded by this system.
Cannot playback PCM signal with sampling frequency over 96 kHz.
• Check connections to other equipment.
• Set “DIG ” or “ANLG ” in “Setting input signals”.
• Set “AUTO” in “Setting input signals”.
• Turn this system off then on again.
The remote control does not
work.
• Replace the batteries if they are worn.
Pages
22
24, 25
29
3
16 to 21
33
33
—
9
HDMI
Reference
Sound field
Troubleshooting guide
Common problems
The standby indicator lights • When you connect the AC power supply cord to the household AC outlet, the
up even if the system turned
standby indicator lights up while the system is off. When you turn the system
off.
on, the indicator goes off.
22
No sound from microphone
connected to DVD player
(karaoke).
• No sound output from microphone if connection to this system is digital. Change
to analog connection and input. Make analog connection to AUX3.
19
There is no DTS audio
output. There is audio
output, but the DTS decoder
indicator is not lit.
• Set the DTS Digital Audio Output setting on the DVD player, Blu-ray Disc player
or DVD recorder to “Bitstream”.
• Set “DTS” in “Setting input signals”.
—
Sound is not heard when
playing DVD audio.
• This may occur due to digital copyright protection of the disc if using digital
connection. This system may not be able to play sources with sampling frequency
over 48 kHz.
—
Sound stops.
(“F61” appears on the
display for about a second.)
The protection circuit
activates when some
abnormality is detected,
and turns off the system
automatically.
• Straining of the speakers through excessive volume or power.
• This may occur if you use the system in an extremely hot environment.
• Curtains or other objects may be blocking the exhaust hole.
 Determine and correct the cause, then turn the system on.
(The protection circuit is reset.)
(Consult your dealer if the problem persists.)
—
—
—
“F70 ” appears on
the display.
(“DSP” or “HDMI” is
displayed in place of .)
• Turn off the system, unplug the AC power supply cord, and consult your dealer.
—
“F76” appears on the
display.
(After display, the system
turns off.)
• Disconnect the AC power supply cord, and consult your dealer.
—
No sound in surround mode. • Set to Dolby Virtual Speaker, Dolby Pro Logic
or SFC.
Cannot use Dolby Virtual
Speaker, Dolby Pro Logic
or SFC.
• You cannot use these features with PCM signals with sampling frequency over
48 kHz. Make analog connection to AUX3.
• You cannot use for Dolby Digital dual sounds.
When using an HDMI
connection, the first few
seconds of sound is cut off.
• This may occur if you start play from a chapter on a DVD. The following will
correct the problem.
 Change the audio output setting on the Blu-ray Disc player, DVD recorder or
DVD player from “Bitstream” to “PCM”.
 Change input signal setting to “PCM” in “Setting input signals”.
The system does not work
properly.
• The system does not work properly if you have connected the HDMI input and
output terminals incorrectly. Turn the system off, unplug the AC power supply
cord, and make the connections again.
33
26, 27
19
32
—
33
17
36
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 36
7/16/2008 1:52:25 PM
HDMI
Problem
Possible solution
• Confirm “Setting VIERA Link “HDAVI Control” to “OFF ”” is set to “ON ” (in
simultaneous operation).
When it is “OFF ”, change to “ON ”.
• VIERA Link “HDAVI Control” does not function in power saving standby mode
when this system is turned off. See “Reducing standby power consumption
(Standby mode)” and set to “ON ” (normal power consumption).
• Check VIERA Link “HDAVI Control” settings of the connected equipment.
When VIERA Link “HDAVI • VIERA Link “HDAVI Control” may not function when you change the connections
for HDMI equipment, insert and remove the outlet, or during blackout. Do the
Control” does not function
following operations in this case.
properly
– Turn the TV (VIERA) on again while all the equipment connected with HDMI
cables are on.
– Set “VIERA Link “HDAVI Control” (HDMI equipment control)” of TV (VIERA) to
“OFF” and then set to “ON” again. (For details, refer to the operating
instructions for TV (VIERA).)
– Connect this system to TV (VIERA) using the HDMI cable, switch the TV
(VIERA) on, unplug this system’s AC power supply cord, and insert it into a
household AC outlet again.
Pages
31
31
—
—
Product Service
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change in
performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that described
in these operating instructions. Refer all other servicing to authorized
servicing personnel.
3. Replacement parts—When parts need replacing ensure the servicer
uses parts specified by the manufacturer or parts that have the same
characteristics as the original parts. Unauthorized substitutes may
result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
For product information or assistance with product operation, refer to
“Customer Services Directory” on page 39.
The model number and serial number of this product can be found on
either the back or the bottom of the unit.
Please note them in the space provided below and keep for future
reference.
SC-HTR310
MODEL NUMBER _________________________________________
SERIAL NUMBER _________________________________________
User memo:
DATE OF PURCHASE _____________________________________
DEALER NAME __________________________________________
DEALER ADDRESS _______________________________________
________________________________________________________
TELEPHONE NUMBER ____________________________________
Reference
The servicer will require all components to service your system.
Therefore, should service ever be necessary, be sure to bring the entire
system.
Product information
Troubleshooting guide/Product Service
1. Damage requiring service—The unit should be serviced by qualified
service personnel if:
37
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 37
7/16/2008 1:52:26 PM
Glossary
Analog
Optical
Audio signals produced from L/R audio output terminals of
general equipment is called analog audio.
Using optical fiber cable for digital signal input/output from DVD,
CD, etc., provides better sound quality for playback or recording
compared to analog. Only possible with equipment that has an
optical terminal.
CPPM (Content Protection for Prerecorded
Media)
This is the copyright protection technology which prevents file
copy of DVD audio.
Decoder, Decode
Decoder is the device to enable us to hear audio data that is
encoded on DVD, etc., as a normal audio signal. This process
is called Decode.
Digital
Blu-ray Disc players, DVD recorders, DVD players, and CD
players are usually equipped with digital output terminals.
Connect through the digital terminal to enjoy digital surround
systems such as Dolby Digital and DTS.
Dolby Digital (DVD etc.)
Digital surround system developed by Dolby Laboratories.
Dolby Pro Logic
This system can process not only Dolby Surround, but also
other 2-channel sources to produce a 5.1-channel sound for
a more realistic sound field. It is also possible to enhance old
movies recorded in stereo with this dynamic 5.1-channel sound.
This system uses Dolby Pro Logic to add surround effects to
stereo sources such as video cassettes and CDs.
����
Sampling is the process of converting the heights of sound
wave (analog signal) samples taken at set periods into digits
(digital encoding).
Sampling frequency is the number of samples taken per
second, so larger numbers mean faithful reproduction of the
original sound.
Standby through function
When this system and TV and DVD recorder are connected
with HDMI cables, image/audio from DVD recorder can still be
transmitted to TV even though the system is turned off.
This is useful when you want to enjoy late night viewing only
with the television’s speakers.
Images recorded with x.v.Color are also supported.
Surround signal
Audio signal made up with front speakers, center speaker
and surround speakers. For this system, surround signal is
automatically played by Dolby Virtual Speaker.
x.v.Color
1080p
Dynamic range
Dynamic range is the difference between the lowest level of
sound that can be heard above the noise of the equipment and
the highest level of sound before distortion occurs.
HDMI (High Definition Multimedia Interface)
Glossary/Maintenance
Sampling frequency
This system allows you to enjoy a surround effect with two front
speakers, a center speaker, and a subwoofer. This is not merely
a “virtual surround” effect, but rather uses the optimal speaker
arrangements and listening positions for 5.1-channel sound.
Digital surround system developed by DTS, Inc.
HDMI enables you to transmit digital audio and video signals
using a single cable.
You can also transmit control signals using HDMI connections.
LPCM (Linear PCM)
This is one of the PCM methods and the uncompressed audio
signal encoded digitally. This method is used for music CD, etc.
Multi-channel LPCM signals used for Blu-ray Disc, DVD audio,
etc. enable playback with higher-sound quality.
Up to 7.1 channel LPCM signals can be entered to this system.
Reference
This is one of the methods that enables analog sounds to be
converted to digital sounds.
Dolby Virtual Speaker
DTS (Digital Theater Systems)
38
PCM (Pulse Code Modulation)
This is a name of products compliant with ISO Standard for
wider color space: “xvYCC”. This system supports x.v.Color.
This is one of the digital hi-vision images.
1080 is the number of effective scanning lines that constitute
the actual screen. This enables every detail to be beautifully
expressed. Images are less flickered with progressive method
that scans in order from the top. This system supports 1080p.
5.1 channel surround
Monaural and stereo use one channel and two channels
respectively to reproduce sound, but 5.1-channel surround
uses 5 speakers and a low frequency effect channel. The
5 channels are: 1 center speaker, 2 front speakers, and 2
surround speakers at the side of or to the rear of the sitting
position. Sound output of the subwoofer is much narrower than
the other speakers, and so is considered as 0.1. This is called
5.1-channel surround when played through all 5.1 channels,
and with this system you can achieve a similar effect with Dolby
Virtual Speaker.
Maintenance
Unplug the AC power supply cord from the household AC outlet and wipe the system using a soft and dry cloth.
• When the system is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a
dry cloth.
• Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to
go off.
• Before using chemically treated cloth, read the instructions that come with the cloth carefully.
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 38
7/16/2008 1:52:26 PM
Limited Warranty
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Audio Products
Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials
or workmanship, Panasonic Consumer Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) will, for
the length of the period indicated on the chart below, which starts with
the date of original purchase (“warranty period”), at its option either (a)
repair your product with new or refurbished parts, or (b) replace it with
a new or a refurbished product. The decision to repair or replace will be
made by the warrantor.
Product or Part Name
Audio Products (except items listed
below)
USB Reader-Writer, Personal Computer Card Adapters
(in exchange for defective item)
Accessories: Headphones, Cartridges, Microphones, Adapters
Parts
Labor
One (1) year
One (1) year
One (1) year
Not Applicable
Ninety (90)
days
Ninety (90)
days
Rechargeable Batteries, DVD-R/RAM Discs (in exchange for defective Ten (10) days Not Applicable
item)
SD Memory Cards, Rechargeable
Ninety (90)
Battery Packs (in exchange for defecNot Applicable
days
tive item)
During the “Labor” warranty period there will be no charge for labor.
During the “Parts” warranty period, there will be no charge for parts.
You must carry-in or mail-in your product during the warranty period. If
non-rechargeable batteries are included, they are not warranted. This
warranty only applies to products purchased and serviced in the United
States or Puerto Rico. This warranty is extended only to the original
purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty
service.
Carry-In or Mail-In Service
For Carry-In or Mail-In Service in the United States call 1-800-211-PANA
(1-800-211-7262) or visit Panasonic web site: http://www.panasonic.
com
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)750-4300 or fax (787)-768-2910.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products
not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls,
improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a hotel, office, restaurant, or other
business), rental use of the product, service by anyone other than a
Factory Servicenter or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS
NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT
OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes
damages for lost time, travel to and from the servicer, loss of media or
images, data or other memory content. The items listed are not exclusive, but are for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to
state. If a problem with this product develops during or after the warranty
period, you may contact your dealer or Servicenter. If the problem is not
handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Servicenter; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at:
h�p://www.panasonic.com/consumersupport
h�p://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at:
h�p://www.pstc.panasonic.com
Limited Warranty
or, contact us via the web at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday – Friday 9 am to 8 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
Reference
npcparts@us.panasonic.com
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
39
RQTX0165
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 39
7/16/2008 1:52:26 PM
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
En
RQTX0165-1P
H0708AB1088
©2008 Matsushita Electric Industrial Co., Ltd.
Printed in Malaysia
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 40
7/16/2008 1:52:26 PM