Twister Moving Light Enclosure

Twister Compact Moving Light Enclosures
Twister moving head enclosures are designed
to protect the new generation of ultra compact
moving lights for use outdoors.
With globes made from clear, UV-resistant
acrylic, and bases of aluminum and stainless
steel, Twister is the economical solution for a
long life in harsh conditions.
Twister is a deceptively simple,
force-cooled moving light enclosure for today’s ultra-compact LED moving head fixtures,
designed for long life and extremely low operating costs.
Twister features a powerful AC
cooling fan that runs when the
fixture lamp is on. Tempest’s
innovative MiniDECTM controller monitors temperature and
humidity to keep the fixture
cool under hot sun and combat
condensation at night.
Like all Tempest enclosures,
power may be split if required
to power the light and the enclosure on the same or on separate electrical supplies.
Twister’s innovative cowls enable the same enclosure to be
mounted base down, base up
or horizontally, with the same
cowls providing air filtering
and rain ingress protection just crop off the outer chambers for base-down and horizontal use.
Models
Twister 1800 - 16”/40cm Globe
Cooling
High-power AC fan changes filtered air every 1-2
seconds when luminaire lamp is on
Twister 1850 - 20”/51cm Globe
Twister 1900 - 24”/61cm Globe
Cooldown
Fans continue running for 5 minutes after lamp
turns off
Twister 1950 - 24”/61cm Globe (extra tall)
DMX
DMX wiring access for luminaire control
Base
Aluminum, plated and epoxy powder coated, and
stainless steel
Power
120V or 200-240VAC, 50/60Hz, single or split
feed wiring for enclosure and luminaire
Globe
High quality UV resistant clear acrylic
Mounting
2 x stainless steel wall-mounting brackets included, or use two standard clamps for pipe mountng
Luminaire
Power Outlet IEC 10 amp 3-pin receptacle (rewirable plug included) for luminaire power
Security
Heavy duty stainless steel latches, may be padlocked for extra security.
Base Color
Black epoxy powder coat. Custom colors to order.
Control
Tempest Lighting MiniDECTM control system.
Patents pending. MiniDEC controller monitors
temperature and power
to the lamp, controls
cooling and changes
air when the lamp is off
to prevent overheating
and minimize condensation.
Orientation
May be installed base-up, base-down or horizontal, by trimming/repositioning inlet and exhaust
cowls.
Outer vent chambers
are removable for base
down and horizontal
mounting
For Luminaire Type:
Twister 1800
Elation Design Wash LED Pro
Elation Platinum Beam/Spot 5R
These fixtures have been tested
and approved with Twister
enclosures.
Chauvet Legend 412
Elation E Spot LED
Elation Platinum Wash LED Zoom
Martin MAC 101
GLP Volkslicht Zoom
Martin MAC 250
Twister 1850
Martin MAC 301
Martin SmartMAC
Chauvet Q-Wash260 LED
Martin MAC Aura
Twister 1950
Chauvet Q-Wash 560 LED
Twister 1900
Chauvet Q-Spot 560 LED
Chauvet Q-Spot 160 LED
Chauvet Q-Beam/Spot 260 LED
Elation Platinum 15R Spot
Elation Design Wash LED 60
Clay Paky Sharpy
Elation Platinum LED Spot Pro
Please contact Tempest for
fixtures not on this list.
Robe DLX Spot
C
Dimensions
B
Orientation
Twister cowls are made from
tough ABS plastic. The outer
hoods may be removed using
a sharp box-cutter knife.
A
H
D
Enclosure
Part Number Guide
Luminaire
Diameter
Height
Max A
Max B
Max C
Twister
1800
16”
406mm
18”
457mm
14”
356mm
10”
254mm
10”
254mm
200
Twister
1850
20”
508mm
22”
560mm
18”
457mm
14”
356mm
16”
406mm
350
Twister
1900
24”
610mm
27.5”
700mm
22”
558mm
16”
406mm
18”
457mm
350
Twister
1950
24”
610mm
30.5”
775mm
27”
686mm
16”
406mm
18”
457mm
350
1800.IN
1800.US
1850.IN
1850.US
1900.IN
1900.US
1950.IN
1950.US
Twister
Twister
Twister
Twister
Twister
Twister
Twister
Twister
1800,
1800,
1850,
1850,
1900,
1900,
1950,
1950,
Max Watts
230V
120V
230V
120V
230V
120V
230V
120V
Base up
Use cowls as supplied
Base down
Remove outer cowl hoods
Note: Standard base color is black — custom colors to special order
Shipping Weights/Dims.
User Manual
1800
1850
1900
1950
All
22”x22”x22” (h), weight 24lb - 56 x 56 x 56cm, 14kg
26”x26”x28” (h), weight 38lb - 66 x 66 x 71cm, 17kg
30”x30”x36” (h), weight 47lb - 76 x 76 x 91cm, 21kg
30”x30”x42” (h), weight 55lb - 76 x 76 x 107cm, 25kg
Schedule B Export Code: 8536.30.0000
For more detailed information and installation/operating instructions,
download the Twister User Manual from www.tempestlighting.com
Made in the USA
©Tempest Lighting, Inc., April, 2013
In the interest of continuous product improvement, specifications are subject to change without notice
Tempest Lighting, Inc.,
13110 Saticoy Street, Unit C, North Hollywood, CA 91605, USA
www.tempestlighting.com info@tempestlighting.com
t: +1 818 787 8984
f: +1 818 982 5582
Horizontal
Remove outer cowl hoods
and align both cowls down