evolution wireless In Ear Monitoring
w In Ear Monitoring (IEM)
• Preconfigured, ready-to-use system
• Extremely reliable UHF transmission
• Enormous flexibility due to 1,280 tunable UHF frequencies
• Transmitter and receiver with rugged metal housings
• HDX noise reduction for crystal-clear sound
• User-friendly, menu-assisted operation via LC display
• Low-battery warning
• Extensive range of accessories ensure suitability for a wide variety of applications
• Suitable for multi-channel applications
evolution wireless IEM System – Products
SR 300 IEM stereo transmitter
• 8 frequency presets for direct channel selection
• Stereo/mono selector switch
• Headphone output for monitoring purposes
Foto?
EK 300 IEM stereo receiver
• 8 frequency presets for direct channel selection
• Safety mode (switchable) protects against level peaks
• FOCUS function for individual audio mix
IE 1 stereo in-ear headphones
• With ear-moulds
149
evolution wireless In Ear Monitoring
The evolution wireless IEM system consists of three main components: At the heart of
the system is the SR 300 IEM stereo rackmountable transmitter. The rugged EK 300 IEM
stereo pocket receiver has been specially designed for rough stage use – its modern
controls, adapted to live stage work, ensure a straight-forward, intuitive operation.
Both transmitter and receiver feature a special “lock mode” function to prevent
operating errors. With in-ear headphones connected to the receiver, the musician
and/or sound engineer can listen to the stereo audio signal received. Transmitter and
receiver of the evolution wireless IEM system feature 8 frequency presets for direct
channel selection. For multi-channel applications with two to four monitoring links,
Sennheiser offers the AC 1 antenna combiner. Another brilliant feature of evolution
wireless IEM is the receiver’s FOCUS function, enabling artists to select their very
own balance between their voice/instrument and the band. When transmitting such a
custom mix, the usual stereo signal is changed to a dual mono signal. The receiver is
also fitted with a special safety mode which restricts the in-ear volume to safe levels –
if higher volume levels should be required, the safety mode can be switched off.
Accessories
Carrying case for complete systems
CC 1
Cat. No. 04797
Antenna combiner
AC 1
Cat. No. 04791
Antenna mount
AM 1
Cat. No. 04793
19” rack adaptor
GA 1
Cat. No. 04792
For the complete range of accessories available, please refer to the chapter “Accessories”, page 193 f.
150
evolution wireless In Ear Monitoring
System
Technical Data
Modulation
Frequency ranges
Tunable frequencies
Receiver
System –
w IEM
Technical Data
EK 300 IEM
wideband FM stereo,
Receiver type
pocket receiver
MPX
Receiver principle
non-diversity
A: 518–550, B: 630–662,
Antenna input
M3
C: 740–772, D: 790–822,
AF outputs
–
E: 838–870 MHz
Max. output level
–
1,280
Headphone output
3.5 mm jack socket
(> 100 mW at 32 Ω)
Frequency presets
8
Switching bandwidth
32 MHz
Level adjustment
–
Peak deviation
± 48 kHz
Power supply
9 V PP3 alkaline battery
(pilot tone dev. ± 5 kHz)
(IEC 6 LR 61)
Compander system
HDX
Operating time
> 4–6 h
AF frequency response
50–15,000 Hz
Dimensions
110 x 65 x 22 mm
Signal-to-noise ratio
> 100 dB (A)
Weigth
approx. 255g
THD (1 kHz)
< 0.9 %
Dimensions system case
380 x 370 x 70 mm
Weight system case
approx. 3 kg
In compliance with
ETS 300422, ETS 300445,
CE, FCC
Transmitter
Technical Data
SR 300 IEM
Transmitter type
mains transmitter
RF output power
> 20 mW
Max. input voltage
balanced: + 10 dBu
Headphone output
1/ ” (6.3 mm) jack socket,
4
stereo
Level adjustment
0–15 dB
Power supply
10.5–16 V DC
Dimensions
212 x 145 x 38 mm
Weight
approx. 1100g
151