BELINEA 1905 G Specifications

LCD-Monitor
Belinea 1905 S1
Handbuch Manual Ma­nuel Ma­nu­ale Handleiding Handledningen Hånd­
bok Vejledning Käyttö­opas Instrukcja Használati
Hand­buch Manual Manuel Manuale Hand­­leiding
Hand­ledningen Håndbok Vejledning Käyttöopas
In­strukcja Használati Hand­buch Manual Manuel
Manuale Handleiding Hand­ledningen Håndbok Vej­
ledning Käyttöopas Instruk­cja Használati Hand­buch
Manual Manuel Manuale Handleiding Hand­led­
ningen Håndbok Vej­ledning Käyttöopas Instrukcja
Használati Handbuch Manual Manuel Manuale
Hand­­leiding Handledningen Hånd­bok Vejledning
BELINEA PREMIUM SERVICE
English
The three-year return to base warranty for your Belinea monitor includes all parts and labour. In
addition many countries offer a free of charge swap out warranty programme. This does not affect
your Statutory Rights. Please visit http://www.belinea.com or call the numbers below for further
warranty or service information.
Please have the serial and model number ready when calling.
Deutsch
Die Garantie für Ihren Belinea-Monitor beträgt drei Jahre und umfasst alle Bauteile. Darüber
hinaus bieten wir in vielen Ländern einen zusätzlichen, kostenlosen Austausch-Service an.
Von dieser o. g. Garantie bleiben etwaige gesetzliche Gewährleistungsrechte unberührt.
Nähere Informationen zu Garantie- und Servicefragen erhalten Sie im Internet unter
http://www.belinea.com sowie unter den u. g. Rufnummern.
Bitte halten Sie für Ihren Anruf Serien- und Modellnummer bereit.
Français
La garantie internationale de trois ans sur les écrans Belinea s’entend pièces et main d’œuvre. Pour
obtenir plus d’informations sur la garantie et le service après-vente contactez-nous sur Internet
http://www.belinea.com ou aux numéros de téléphone ci-dessous. Vous pouvez obtenir également
plus de détails sur les possibilités d’échange gratuit, service offert dans de nombreux pays.
Pour votre appel, tenez les numéros de série et d’article à portée de main.
Country
Land
Pays
Belgie/Belgique
Phone number
Telefonnummer
Numéro de téléphone
0900 10630 (0,45 €/min)
Additional swap out service
Zusätzlicher Austausch-Service
Service supplémentaire d’échange sur site
3 year on-site warranty (swap out)
Deutschland
02365 952 1010 3 Jahre Garantie-Austausch-Service
Česká republika
+420383369146
Záruka 3 roky
España
090 21 96 497
3 años de garantia con intercambio a domicilio
Ελλαδα
210 48 05 800
Εγγυηση 3 χρονια επιτοπου αντικατασταση
France
0820 091820 3 ans de garantie avec échange standard sur site
Hrvatska
+385 1 3654 960
3 godine jamstva
Italia
199 156 169
3 anni di Garanza di sostituzione a domicilio
Ireland
00 353 12861343
3 year on-site warranty (swap out)
Luxemburg/Luxembourg
0900 74235 (0,45 €/min)
3 year on-site warranty (swap out)
Magyarország
01 340 99 51/53
3 év helyi szerviz
Nederland
0900 BELINEA (02354632) (0,70 €/Gesprek)
3 year on-site warranty (swap out) Österreich
01 277 89 88 3 Jahre Vor-Ort-Austausch-Garantie
Polska
071 337 19 55/022 863 27 77 3 lata gwarancji (door to door)
Portugal
090 21 96 497
3 Anos de Troca em Garantia On-Site
Ðîññèÿ
+49 (0) 180 5 62 94 68
Òðåõëåòíÿÿ ãàðàíòèÿ ñ çàìåíîé íà ðàáî÷åì ìåñòå
Schweiz
0900 575 111 (2,13 CHF/min)
3 Jahre Vor-Ort-Austausch-Service
Slovenija
+386 1 5837247
3 leta garancije
United Kingdom
01344 788920
3 year on-site swap out warranty (UK mainland only)
All other countries
Alle anderen Länder
+49 (0) 180 5 62 94 68
Les autres pays
ENGLISH
INTRODUCTION
Table of contents
This manual will familiarize you with the installation and
use of your Belinea monitor. Please take the time to
look through these instructions even if you are familiar
with monitors.
INTRODUCTION.......................................................... 2
We have taken all possible care to ensure that this
manual contains correct, accurate information. However,
the manufacturer cannot assume liability for any possible
errors. In addition, the manufacturer cannot guarantee
that the hardware will meet the purpose you require. We
would appreciate reports of any errors, suggestions or
criticism.
©Copyright 2006
MAXDATA Systeme GmbH
45768 Marl, Germany
www.maxdata.com
Editing, DTP and translation by think’Z GmbH,
www.thinkz.de.
All rights reserved. No part of this manual may be
reproduced, processed or distributed in any form (print,
photocopy, microfilm or any other process) or processed
by an electronic system without prior written permission
from the manufacturer.
Important information...................................... 3
Caring for your LCD monitor......................... 3
Wall mounting....................................................... 3
Unpacking................................................................ 4
Connecting............................................................. 4
startup..................................................................... 4
Configuration....................................................... 5
Basic Setup............................................................. 5
image settings using the osd menu............. 5
OSD Menu Functions............................................ 6
Troubleshooting................................................. 7
TECHNICAL SPECIFICATIONS.................................. 7
definition of the maxdata WARRANTY.......... 8
We reserve the right to make changes according to technical
progress. Belinea is an internationally registered trademark.
Other brand names may be registered trademarks and must
be treated as such.
Important Safety Instructions
Guide to symbols
Some Belinea monitor models come with 2 power cords.
Please ensure you use the UK plug (3 pin) in the UK and
not the European plug (2 pin).
The symbols below are used in this manual to indicate
where there is risk of injury or damaging devices or to
indicate especially useful information:
Do not place the monitor in very hot or cold, nor damp or
dusty surroundings. Do not put vases etc. on the monitor,
water may cause short circuits. Do not block or cover the
ventilating openings. Do not install this monitor in areas
where too much light or sunshine might directly hit the
screen, otherwise the brightness of the picture will be
poor due to reflections. Refer all servicing and maintenance to authorised service personnel only!
DANGER! Indicates risk of injury. When not
following instructions, severe injury or death
may result.
CAUTION
Do not remove the cover!
Serious electrical shock hazards exist inside
this monitor.
ATTENTION! Indicates possible damage
to devices. When not following instructions,
devices may be heavily damaged.
IMPORTANT! Indicates hints on operation
and other useful information.
NOTE
Removal of cover invalidates your warranty.
We are all responsible for the environment: this manual was printed from front to back on
paper that was produced without chlorine.
Belinea 1905 S1 - Operating Instructions - ENGLISH
Important information
Note on monitor placement
• The setup location must not be extremely hot,
cold, humid or dusty. Heat and cold can impair
the functionality of the monitor. Humidity and dust
can cause the monitor to fail.
• Do not place the monitor near heaters such as
radiators or the like. Do not expose the monitor
to mechanical vibrations or jarring.
• Position the monitor so that no direct light or sun
strikes the screen, which could cause reflections
that reduce the quality of the image.
Notes on power connection
Only use the power cord designated for use in
your country.
The wall outlet should be within easy reach. Pulling the power plug is the only way to disconnect
the monitor from the power source.
• This monitor is ENERGY STAR ® -compatible.
MAXDATA is an ENERGY STAR® partner and
guarantees that this device complies with the
ENERGY STAR® guidelines for optimizing power
consumption.
Safety instructions for operation
The power cord must not be damaged. Do not
place any objects on the power cord and make
sure it does not have any knots. To unplug the
cord, always pull on the plug and not on the cable
itself. Damage to the power cord may result in fire
or cause electric shocks.
• Avoid covering the ventilation slots. Air circula­
tion is necessary to prevent the monitor from
overheating. If the air circulation is restricted it
could cause fire or damage the monitor.
• Do not use any solvents to clean the monitor, as
the housing could be damaged. For more information about cleaning the monitor, please see
“Caring for Your LCD Monitor”.
Never open the monitor housing yourself. There
is a danger of electric shock and other hazards.
The monitor may only be opened and serviced
by qualified professionals.
Note on resolution
All resolutions provided by the graphics card that
deviate from the physical resolution of the panel
are adjusted by interpolation. This can impair the
image quality.
Notes on ergonomics
To protect your eyes, neck and shoulder muscles
when working with a computer, we recommend
that you maintain a viewing distance of between
50 and 75 cm from the monitor. Furthermore, you
should regularly focus on an object around 6 m
away from you to help your eyes relax. Ergonomically, your posture is best when elbows, pelvis,
knees and ankles are all at right angles.
Caring for your LCD monitor
• First, unplug the power cord from the wall socket.
• If the LCD screen is extremely dirty, clean it with a
moist cloth. Use only warm water and then wipe the
monitor dry. Solvents or harsh cleaners can damage
the housing. Clean the display surface only with a
soft cloth, otherwise you may damage the display’s
­coating.
• If the monitor is only slightly dirty, clean it using a
soft, dry and antistatic cloth.
• The LCD monitor’s screen surface is very sensitive.
Please avoid any contact with the surface (finger,
pencil, etc.) and be especially cautious during
transportation since jolts and shocks can cause the
screen to become scratched (always use the original
packaging).
Wall mounting
The Belinea monitor is shipped with the standard desktop configuration. However, you can optionally mount the
device on a wall or on a monitor swivel arm (optional accessory). Please follow the corresponding instructions
(4-hole assembly with a spacing of 75 × 75 mm according to the international VESA FDMI standard).
Belinea 1905 S1 - Operating Instructions - ENGLISH
Unpacking
Carefully lift the monitor out of the packaging and make
sure that all components are included (see fig. 1).
Power cord
Save the original box and packing material in case you
have to ship or transport the monitor.
To set up the device, you must fit the monitor base
together.
VGA cable
MENU


AUTO
Figure 1. LCD Monitor
Connecting
 To connect the monitor to your PC.........................
1. Make sure that the PC and monitor are unplugged.
2.Connect the 15-pin signal cable to the PC (see
fig. 2).
1
Signal cable
Figure 3. Connecting the monitor to the power source
 To connect the monitor to the power source.........
Connect the separate power cable ( in fig. 3) to the
monitor and a grounded outlet.
Figure 2. Connecting the monitor to the PC
startup
1. First start your PC and then turn on your Belinea
monitor using the power switch ( in fig. 4). The
power indicator ( in fig. 4) should light up green.
2. Adjust the image to meet your requirements (see the
following sections “Basic Setup” and “Image settings
using the OSD menu”).
3. If there is no image displayed on the monitor, consult
the section “Troubleshooting”.
Belinea 1905 S1 - Operating Instructions - ENGLISH
Configuration
 Monitor setup under Windows® 9x/ME/2000
and XP:
 Monitor setup under Windows® NT 4.0:
If using the monitor under Windows® 9x/ME/2000 or
XP, we strongly recommend installing the Belinea configuration file. You can obtain this file from your Belinea
dealer or download it from the MAXDATA FTP server
at ­ftp.maxdata.com.
Under Windows ® NT 4.0 no separate setup file is
required. Select the vertical frequency and the number
of colors directly from within the “Settings”  “Control
Panel”  “Display”  “Settings” menu.
Here, click the “Belinea_Treiber_Driver” directory and
download the Belinea.inf and README_Belinea.TXT
files. Follow the installation instructions in the README_
Belinea.TXT file.
Basic Setup
➧ Automatic Image Adjustment..................................
➧ Locking and Unlocking the OSD.............................
You can adjust the image settings (such as image position, phase, etc.) manually or by using the LCD monitor’s
automatic image adjustment feature. This will adjust the
image parameters to their optimal settings for the current graphics mode. Press AUTO ( in fig. 4) to launch
the automatic adjustment. The process will take a short
while until completed.
Holding down the MENU button ( in fig. 4) for 10
seconds locks the OSD menu and a corresponding
message is displayed. You can deactivate this function
by holding down the MENU button for 10 seconds once
again.
image settings using the osd menu
The OSD menu is a window on your screen that allows
you to view and change display settings. To change an
OSD setting:
1. Press the MENU button ( in fig. 4) to display the
OSD menu on the screen.
2. There are a total of 12 OSD submenus divided by
categories. Select the desired submenu by pressing the OSD button  or  ( and  in fig. 4; see
section “OSD Menu Functions”).
3. Press the OSD button MENU ( in fig. 4) to activate
the selected function or associated submenu.
4. If you selected a submenu, now select the subfunction you want using the  or  OSD button ( and
 in fig. 4).
5. Activate the selected option with the MENU button.
Set the desired value using the OSD button  or 
( and  in fig. 4). The new settings will take effect
immediately.
6. Repeat steps 2–5 to make further adjustments as
needed.
MENU
1

2

AUTO
3
4
7. The OSD menu automatically disappears if no
changes are made for more than 15 seconds (default
setting). The current settings will be saved. You can
also close it manually by activating the EXIT category.
5
6
Figure 4. Monitor features
Belinea 1905 S1 - Operating Instructions - ENGLISH
OSD Menu Functions
1280 x 1024
E
xit
R
H: 64.1KHz
Brightness
Controls the picture brightness.
Contrast
V: 60.1Hz
Automatically selects the optimal values for the image
settings (image position, phase, etc.).
R
Controls the picture contrast.
Position
Controls the horizontal and vertical position.
H Size
Controls the picture’s horizontal size.
Auto
Language
OSD menu language selection: English, French,
German, Italian, Spanish, Polish, Dutch, Russian.
OSD
OSD H Position: Controls the OSD menu’s
horizontal position.
Adjusts the internal clock’s time lag in order to optimize
the screen image.
OSD V Position: Controls the OSD menu’s
vertical position.
Auto Switch
This option allows you to decide if the Auto Switch
function should take effect after each change to the
monitor’s resolution.
Color
Reset
Restores the image settings to their factory values.
Phase
R
E
xit
Exit
The OSD menu disappears when you select this menu
item and confirm with MENU.
Three different color temperatures are available: Cool,
Warm and sRGB (D65). Select the desired setting by
pressing the MENU button. Contrast adjustment is
disabled in sRGB.
You can also define the RGB values yourself. Press the
 or  buttons to select Red, Green or Blue. Then
press the MENU button.
Belinea 1905 S1 - Operating Instructions - ENGLISH
Troubleshooting
Blank Screen
Power indicator is off
- Make sure the power cable is connected properly (see section “Connecting”).
- Make sure that the monitor was turned on using the power switch (see section “Startup”).
Power indicator lights green
- A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard
or move the mouse.
Power indicator lights orange
-Could a power saving mode be active? Press any key on your keyboard, or move the mouse.
“No Signal” message
- Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?
- Is the PC turned on (see your PC’s documentation)?
Display Problems
Image is displaced to the left/right or to the top/bottom
- If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see
chapter “Basic Setup”, section “Automatic Image Adjustment”.
Image flickers or is shaky
- Perhaps chosen setup file for the monitor is incorrect. For information on monitor setup under Windows® 9x/ME/2000/
NT/XP consult the “Configuration” section.
Image is blurred
- Check brightness and contrast settings (see chapter “OSD Menu Functions”, sections “Brightness” and “Contrast”).
Color problems
- If the colors are off (e.g., white is not really displayed as white, etc.), you should adjust the color temperature (see
“Color” function in section “OSD Menu Functions”).
TECHNICAL SPECIFICATIONS
LCD panel
19 inch diagonal size (48.3 cm visible), low radiation according to TCO ’99, certified
to ISO 13406-2, pixel fault class II, TN panel technology
Contrast ratio 500:1 (typical) / 600:1 (max.)
Viewing angle
(Contrast ratio ≥ 10:1) horizontal 150°, vertical 130° (typical)
(Contrast ratio ≥ 5:1) horizontal 170°, vertical 170° (typical)
Response time
8 ms (typical)
Brightness
280 cd/m2 (typical) / 300 cd/m2 (max.)
Input signal
Video: analog (15-pin mini D-Sub)
Display colors
16.2 mill. colors
Synchronization
31–83 kHz horizontal, 56–75 Hz vertical
Video band width
135 MHz (pixel rate)
Ergonomic resolution
1280 × 1024 (60 Hz)
Power connection
100–240 V AC, 50/60 Hz
Power consumption
ON status: max. 37 W; color of the status LED: green
SLEEP status: < 2 W; color of the status LED: orange
Power saving functions EPA certified
Dimensions / weight
Width: 426 mm, height: 417 mm, depth: 58 mm; 5.4 kg (net)
Operating environment
Operation: 5 to +40 °C, humidity: 20–80% (without condensation)
Storage: -20 to +60 °C, humidity: 10–85% (without condensation)
Belinea 1905 S1 - Operating Instructions - ENGLISH
Definition of the MAXDATA warranty
The MAXDATA warranty covers all failures resulting from defective components and manufacturing defects that occur
within the product specific warranty period. The warranty period begins on the date of purchase (date of original customer invoice).
Please be aware that in order to maintain your warranty claim the product concerned has to be received by MAXDATA
together with the serial number and a copy of the original customer invoice within the warranty period.
MAXDATA’s obligation under the warranty is restricted to repairing or exchanging defective components.
Defective components removed during repair process become the property of MAXDATA.
Components replaced within warranty coverage assume the remaining valid warranty period of the system.
Scope of the MAXDATA warranty:
MAXDATA’s obligation under the warranty is limited to failures resulting from defective components and manufacturing
defects, defects in the CRT, panel and background lighting for electrical errors (please also refer to the term definition
and liability restriction).
Exclusions from the MAXDATA warranty:
The MAXDATA warranty does not cover damage of any kind that results from:
• The use of peripheral devices
• Improper use/operating faults
• Non-adherence to the user instructions
• Attempted repairs by the customer or third-parties without authorisation by MAXDATA
• Defective maintenance by third parties
• Device defects due to power failure, heat losses, missing EMC (electro-magnetic compatibility) cabling or similar
reasons
• Accidents, storms, lightening, fire, water/other liquids, other natural catastrophes, theft, riots, plundering, the effects
of war or other instances of acts of god
• The use of third-party components
• Non-authorised system changes
• BIOS versions/firmware updates/programmes to remove defects of all kinds (e.g., service packs, bug-fixes, hotfixes)
• Resetting safety functions, deletion of passwords etc.
• Loss of customer-specific data or software from repair and installation processes
• Improper use of machine capacity or output
• Inappropriate customer operating environment
The MAXDATA warranty also does not cover the following:
• MAXDATA products from which the category plates, serial numbers, part numbers on the machine of machine parts
have been removed or changed
• Decline in rechargeable battery capacity after the end of the 6 month warranty period
• The provision and installation of BIOS, driver or software updates/upgrades
• The new installation of software/operating systems that are no longer able to run (e.g., because of the deletion of
system-relevant files, incorrect system settings or self-copying programs, e.g., computer viruses)
• Wear and tear on data storage media, LCD background lighting, CRTs on CRT monitors, picture tube burn-in or
loss of brightness
• MAXDATA products for which the warranty seal has been broken by entities other than MAXDATA or those authorised by MAXDATA
• Breaks and scratches on TFT panels and CRT displays
• Damage through use of force and external impact respectively
• Spots on the panel caused by external impacts
Belinea 1905 S1 - Operating Instructions - ENGLISH
• Colour spots resulting from falls
• Error class 2 pixel errors (please note the information on ISO 13406-2 on the website of the MAXDATA subsidiary
concerned)
If the device received by MAXDATA demonstrates two defects and only one of these is covered by the MAXDATA
warranty claim, the customer only has the right to repair for the damage to his device covered by the warranty.
In this case MAXDATA reserves the right to offer the customer several options on resolution in the form of a quotation
and to charge the relevant processing costs.
This also applies to those devices for which upon receipt, it is found that they are not covered by the warranty. In these
cases, MAXDATA reserves ownership of the exchange device provided and is entitled to demand its return.
MAXDATA reserves the right to charge costs incurred for unsuccessful attempts to collect a device that has been
registered as defective from the customer.
If an exchange device is not provided in spite of a period having been set, MAXDATA is entitled to charge the net sales
price as per the current price list plus the processing costs incurred. The customer has the right to provide evidence
for the existence of lower damages.
MAXDATA restriction to liability:
MAXDATA expressly excludes customer claims that go beyond the warranty conditions if there is no obligation of
liability imposed on MAXDATA by the laws of the country where the device was bought. This also applies in particular
with regard to claims for damages as a result of default, damages for claims arising as a result of defects, loss of profit,
transport damage that was not registered within a period of 6 days after receipt of the goods, loss of data or information
through repair processes or damage resulting from interruption to operations.
Governing law:
All rights and duties are subject to the law of the country in which the MAXDATA product was purchased. The Agreement on Contracts for the International Sale of Goods (CISG) is not applicable.
Data Backup:
The responsibility for complete data backups, including of applications and operating system software remains exclusively with the customer. The data must be backed up before the warranty claim is made. MAXDATA excludes liability
for any data or information lost for this reason during a warranty claim.
For further details regarding the MAXDATA warranty conditions please refer to www.maxdata.co.uk.
Belinea 1905 S1 - Operating Instructions - ����������������
������������������������������������������������������������������������������������������������������������������������������������������������
������������������������������������������������������������ ������������ ���� ����� ��� ���� �������� ������������ ��� ������������������������ �����������
���������
����� �������� ������ ���� ������������� ���� ���� ������� ������� ������ ��������� ���� ��� �������������� �������������� ���� �������� ���������� ��� ��������
����������� ���� ���������� ������� ���� ���������� ��� �� ������ ������� ��� ���� ���� ����� �������� �������������� ��� ������������� ������������ �������
���������������������� ����� �������� �������� ���� ������� ��������������� �������� ���������������� ����� �������� ��������� ������� ���������������� ���
���������
����������������������������������������������������������������������������������������������������������������������������������������������������
����������� �������
��������������������������������������������������
����������������������������������������������������������������������������������������������������������������������������������������������������
���� ����� ��������� ��� ���� ��� ���������� ���� ������ ������������ ���������� ���� ����������� ��� ����� ���������������� �������� ����������� ���� ����� ����� ��
���� ��������� ���� ������� ������ ������������� ������ ��� ��� ���� ��� ���� ��������� ��� ��������������� �������� ���� ��������� ��� ������������ ����������� ����� ��� �����
������������ ��������� ����������� ������� ��� ������ ������ �������
���������������������������������������������������������������������������������������������������������������������������������������������������������
���� �������� ����������� �������������� ������ ���� �������� ��� ������������ ����������� ����� �� ��������� ������� ��� ���� ������������ ������ ������� ���� ��������
������������ ����������� ������������ �������� ��� ��� ������ ��� ����� �������� ������������ ���������� ��� �������� ��� ������ ����� �������� ������������� ���� �������
��������� �� ���� ��� �������
���������������������������������������������
���� �������������� �������� ���� ����� ���������� ��� �������� ���������������������� ����� �������� �������� ���� ������� ��������������� �����
�������� ������� ������������� ��� ���� ��������� ���� ���� ��� ������ �������� ����������� ���� ������������ ������ ������������ ����� ��������� ���� �����������
���������������������������������������������������������������������������������������������������������������������������������������������������
��� �������� ��� ��� ����� �������� ������ ���� �������� ����������� ���� ������������ �������
������������������������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������������
������ ���� ����� ����� �� ������ �������� ��� ���� �������������� ������������� ���� ��� ����� ��������� ���� ��������� �������������� ��������� ��������� ���� ��
�������� �����
���������������� �������������������������������������������������������������������������������������������
������������������������������������������������������������������������������������������������������������������������������������������������������
�������������� ������������
������ ����������
���������������������������������������������������������������������������������������������������������������������������������������������������������
��������������������������������������������������������������������������������������������������������������������������������������������������������
������ ������ ����������� ���� ����������� �������� ��� �������� ������ ��� �������������� �������� ������ ����� ���� ������ ����������� ����������� �������� ��
��������� ���� ���� ����� ���� ���������� ��� ������� ����� ��� ������� ������� ��������� ���������� ������������� ������� ��� ������������ ������ ���� ��������� ���� ��
���� ����������������� ������������������������������������������������������������������������������������������������������������������������
���� ������
���� ��������� ������� ������� ��������� ����� �������� ����������� ��������� ����� ����� ��� ������ ����� ���� �������� ������ ����������� ����� �����������
������ �������� ��� ���������� ������ ����������� ���� �������� ��� ���� �������� �������� ������� ������ ��� ������������ ���� ����������
�������� �
�������� ��� �������� ��� ������������� ���������� ���� ��� ���� ������������������ ������� ��� �������� ��������� ���������� �������� �������� ���� �������
������� ���� ��� ������ ��� ����� ������� ���� ��������� ������� ������������ ������� ����� ����������� ���� ������������������ ������� ��� �������� �������� ���� ���
����������� ��� ������������ ����������� ����� ���� �������� ���� ��������
�������� �
�������� ��� ���������� ������ ��� ����������� ������� ���� ���������� ��� �������� ���� �������� ������� ���� ��� ������ ��� ����� ������� ���� ��������� ������
������������ ������� ����� ���������� ���� ���� �������� ���� ��������� ��� ����� �������� ����� �������� ��� ���� �������� ��� ���� ��� ���� ����������� ��� �����������
��������������������������������������������������������������������������������������������������������������������������������������������������������
������ ��������� ��� ������ ������ ��� ��� ������������� ���������� ������������� ���� ����� ��� ��������� ����� ���������� ����� �� �������� ����� ������������ ��
����������
����� ��������
���� ��������� ������� ������������ ������� ����� �������� ����� ���� ������ ���� ��� ����� ������� ���� ������������ ���� ��������� ��� ���� ��������� ����
��������� ���� ���������� ����� ���� �������� �������� �������� �������� ����� ������ ����� ������ ���� �������� ������� ���� ������ ������ ��� ���� �������������
�������� ���������� ���������� ��� ������ ��� ������������ ������ ����� ����� ���������� ������ ��� ����� ������� ����������� ���������� ��� �� ������������
����� �
����� ���� ��� ������ ��� �������� ������� �������� ��������� �������� ���� ������������ ����� �������� ���� �������� ������� ���� ��� ������� ������� ������� ����
����������� ���� ��������� ������� ������������ �������� ���� ���������� ��� ����� ������ ��� ������������ ���� ���� ����� ����������
�
� ����������������� ��� �������� ��� ����������� ������ ����������� ������� ������� ���������
��
� ������ �������� ���� �������� ���� ������ ������� ������ ���� �����������������
Benelux
MAXDATA Benelux B.V.
Bredaseweg 113-115, NL - 4872 LA Etten-Leur
Phone: +31 (0) 76 5039250
France
MAXDATA S.A.R.L.
7 avenue du Général de Gaulle, Bâtiment 4,
F-91090 Lisses
Phone: +33 (0) 169 112990
Germany
MAXDATA Computer GmbH & Co. KG
Elbestraße 12-16, D-45768 Marl
Phone: +49 (0) 2365 952-0
Italy
MAXDATA Italia S.r.l.
Strada 1, Palazzo F1
I-20090 Milanofiori, Assago (MI)
Phone: +39 (0) 2 5777-91
Poland
MAXDATA Sp. z.o.o
Ursynów Business Park
ul. Pu�awska 303, PL-02-785 Warszawa
Phone: +48 (0) 22 5435800
Spain . Portugal
MAXDATA Iberia s.l.
c/Colquide, 6
Edificio Prisma – Portal 1-B-Pta. 1a
E-28230 Las Rozas (Madrid)
Phone: +34 (0) 91 6375655
Switzerland
MAXDATA Computer AG
Haldenstraße 5
CH-6340 Baar
Phone: +41 (0) 41 766 32 32
United Kingdom
MAXDATA UK Limited
The MAXDATA Centre, Downmill Road
Bracknell, Berkshire, RG12 1QS, UK
Phone: +44 (0) 1344 788900
www.belinea.com
Belinea ist eine Marke der MAXDATA AG
Belinea is a trademark of MAXDATA AG
Belinea est une marque déposée de MAXDATA AG
Art. No. 11 19 31 / March 06
Austria
MAXDATA Computer GmbH
Ignaz-Köck-Straße 9, A-1210 Wien
Phone: +43 1 (0) 27789-0