Blood Pressure Monitor

Help for Caregivers > Wellness: Wireless Wellness Devices >
Blood Pressure Monitor: Additional Information and Instructions
Blood Pressure Monitor
A blood pressure monitor can be added to the GrandCare System to
record blood pressure readings.
The blood pressure monitor is battery-operated and Bluetoothenabled to communicate wirelessly with the system.
Caregivers can log onto the Online Care Portal to view Health
Reports and to set up custom Wellness Notifications and
Acknowledgements.
Residents can view their Health Readings by using the Wellness
Button on the Touchscreen.
Taking a Blood Pressure Reading
Follow all manufacturer-provided directions for setting up and using
the blood pressure monitor, including battery installation, taking
accurate readings, and device care.
Once the reading has been taken, it will be sent to the system
automatically.
Supported Models
There are variety of models that can be used with the GrandCare System. For a full listing of supported health devices,
see our Supported Hardware List. Use the manufacturer’s directions that came with the device to identify the model you
have.
Identifying the Device Model
Each blood pressure monitor displays its model number on the front face of the device.
•
If your device reads "UA-767 Plus BT", you have the UA-767PBT BP Monitor.
•
If your device reads "UA-767 Plus BT-Ci", you have the UA-767PBT-Ci BP Monitor.
GC-01-OUM-0002
Rev G
Help for Caregivers > Wellness: Wireless Wellness Devices >
Blood Pressure Monitor: Additional Information and Instructions
Adding a Blood Pressure Device to the GrandCare System
All Wellness Devices require a Bluetooth Antenna to communicate with the touchscreen. These devices can be added
through the Setup Wizard on the touchscreen or manually through the Online Care Portal.
Through the Touchscreen Setup Wizard
The first time you turn on a new GrandCare System, the Setup Wizard will start automatically and guide you
through setting up your Wellness Devices.
This is the easiest way to add devices, as the system will guide you through the setup process step-by-step.
If you are adding a device to an already configured system, see the Setup Wizard page for instructions on restarting the Wizard.
Manually Through the Care Portal
1.
Log into the Online Care Portal and open the Care Menu.
2.
Click the “Wellness” button.
3.
Under Wellness Devices, click "Add New Device".
4.
Enter a name for the device to identify it.
5.
Select the proper device type and model (A&D UA-767PBT BP Monitor or A&D UA-767PBT-Ci BP
Monitor).
When finished, click "Next" to continue.
6.
Enter the device Serial Number (found on a sticker on the bottom of the device).
7.
Enter the device Bluetooth ID (10-digit number found on a sticker on the bottom of the device - e.g.
00A0960D7944).
8.
Click the "Finish" button.
Manually Pairing the A&D UA-767PBT-Ci Blood Pressure Monitor
The A&D UA-767PBT-Ci BP Monitor requires an additional step to complete pairing of the device.
1.
First, verify that the batteries are removed from the blood pressure monitor.
2.
At the Touchscreen, touch the Settings Button.
3.
Enter the System PIN.
4.
Touch the "Devices" button.
GC-01-OUM-0002
Rev G
Help for Caregivers > Wellness: Wireless Wellness Devices >
Blood Pressure Monitor: Additional Information and Instructions
5.
Select the blood pressure monitor in the Devices list - the Blood Pressure Monitor Details Screen will
appear.
6.
Touch the "Pair Device" button.
7.
Follow the directions on the screen: insert the batteries into the device, watch for “Pr” to display on the
device display, then touch "Start Pairing."
8.
Wait while it pairs - you will see a Success Message when pairing is complete.
Troubleshooting
If you are having trouble adding the blood pressure device to the system.
•
Make sure you have the Bluetooth Antenna set up correctly.
•
Make sure you have entered the device Serial Number and Bluetooth ID correctly.
•
Make sure that this blood pressure monitor is not configured on any other systems in Bluetooth range.
•
If using the UA-767PBT-Ci model, try doing the pairing steps again.
GC-01-OUM-0002
Rev G