DLO TransDock M47878-080528-D User manual

TransDock micro
™
USER MANUAL
© 2009 KONINKLIJKE PHILIPS ELECTRONICS N.V.
The DLO logo, Digital Lifestyle Outfitters, TransDock
micro and IntelliTune are trademarks of Philips Consumer
Lifestyle. iPod is a trademark of Apple Inc., registered
in the U.S. and other countries. iPhone is a trademark of
Apple inc.
Printed in China
M47878-080528-D
2 | DLO TRANSDOCK MICRO USER GUIDE
Quick Start
04
Using TransDock micro
06
About TransDock micro
06
Setting Up Your TransDock micro
06
Turning TransDock micro On and Off
07
Finding Empty Radio Frequencies Using IntelliTune
08
Manually Finding Empty Radio Frequencies
08
Settings + Features
10
TransDock micro Settings
10
Getting the Best Sound Quality with TransDock micro
13
Tips + Troubleshooting
14
Tech Specs
16
Service + Support
17
FCC Statement
18
Warranty
19
|3
Quick Start
Thanks for purchasing the DLO TransDock micro. We will get you up and
running in a few easy steps. For more detailed instructions, please read
Using TransDock micro [pg. 6].
1. Plug TransDock micro into your auto power outlet.
2. Connect your iPhone to TransDock micro by inserting the Connector Cable
into the iPhone dock connector. Your iPhone will now begin charging if your
car is on.
NOTE: The iPhone will automatically pause playback when TransDock micro
is powered off.
Tune radio to match IntelliTune frequency
Touch Play to enjoy your music
3. Press the dial on TransDock micro to activate IntelliTune. IntelliTune will
automatically find the optimal frequency to broadcast your iPhone over
your car’s FM stereo.
4. Tune your car’s FM radio to the frequency displayed on TransDock micro.
Attach Connector Cable
OLED Display
5. Touch Play on your iPhone to enjoy your music over your car’s FM radio.
For more info on optimizing the sound quality of TransDock micro, please read
Getting the Best Sound Quality with TransDock micro [pg. 13].
4 | DLO TRANSDOCK MICRO USER GUIDE
Plug TransDock micro into power outlet
Press dial to activate IntelliTune
|5
Using TransDock micro
About TransDock micro
TransDock micro is an FM transmitter that broadcasts your iPhone audio
to the FM radio in your car, while simultaneously charging your iPhone.
TransDock micro features DLO’s IntelliTune technology, which scans the
airwaves and automatically finds the best frequencies for transmitting.
TransDock micro also features a unique dial-based interface which provides
a simple and intuitive way to adjust TransDock micro’s settings and tune to
any frequency from 88.1 to 107.9. Like all DLO transmitters, it comes with
the ability to set your own preset stations, so you can save the frequencies
you use most.
This should only take a few seconds. Once the search is complete, the display
will instruct you to tune your radio to the frequency found by IntelliTune.
5. Match the FM station on your radio with the corresponding FM frequency
shown on your TransDock micro’s display. Touch Play on your iPhone to enjoy
your music over your car’s FM radio.
6. To control the overall volume of your music while using TransDock micro,
use the car radio’s volume control, not the iPhone volume.
Turning TransDock micro On and Off
Setting Up Your TransDock micro
TransDock micro will turn on and off automatically with your car. To manually
turn TransDock micro on or off while your car power is on, press and hold the dial
for approximately 5 seconds.
1. Turn on your car radio and set it to FM radio mode.
2. Insert TransDock micro into your car’s power outlet.
NOTE: You can slightly alter the angle of your TransDock
micro by tilting the dial head up or down. See drawing A
3. Plug the Connector Cable into the iPhone dock connector.
4. To activate TransDock micro’s IntelliTune feature,
press the dial. TransDock micro will display the word
INTELLITUNE as it searches for the optimal frequency.
6 | DLO TRANSDOCK MICRO USER GUIDE
A
|7
Finding Empty Radio Frequencies Using IntelliTune
Tips for manually finding an empty station:
If you live in a big city with a lot of FM radio stations, finding an empty FM
frequency can be tricky. DLO’s IntelliTune simplifies the process by doing all
the work for you.
• Be sure to search the entire spectrum of FM frequencies, from 88.1 to
107.9. Don’t just look to the low end of the dial. There are often empty
FM frequencies in the 100’s that work well.
To find an empty frequency using IntelliTune:
• When using scan/seek on your car’s radio, if your tuner stops on 101
and then jumps to 103, look in the 102 range for empty FM frequencies.
1. Press the dial on TransDock micro. This will activate the IntelliTune search.
While it is searching, the word INTELLITUNE will appear on TransDock
micro’s display.
2. Once IntelliTune finds an empty frequency, it will display TUNE RADIO
TO XXX.X. Then, tune your FM radio to that station and begin enjoying
your iPhone music over your car stereo.
• Try tuning to a strong station, then backing down two frequencies - for
example 103.5 to 103.1. You can often find empty frequencies this way.
If that frequency is taken, scan to the next station and try again.
NOTE: You can also visit www.dlo.com/openFM to find the best FM
frequencies in your area.
Manually Finding Empty Radio Frequencies
TransDock micro also allows you to manually tune the
transmitter to desired FM frequencies. To do so, simply turn
TransDock micro’s dial to the right to tune to higher stations
and left to tune to lower stations. See drawing B
B
8 | DLO TRANSDOCK MICRO USER GUIDE
|9
Settings + Features
TransDock micro Settings
To enter the Settings Menu, press and hold the dial for a second. Then, turn the
dial to scroll through the various settings, and press the dial to enter your desired
setting. Turn the dial to the right or left to view the chosen setting options, and
press the dial to confirm your selection. Once you’ve made your selection, you
will return to the Settings Menu. Press the dial to exit the Settings Menu.
NOTE: TransDock micro will automatically exit the Settings Menu after a few
seconds of inactivity.
4. Repeat steps 1-3 to store the remaining presets.
NOTE: Your new preset will override the preset that was last saved, including
the default presets.
PRESET MODE
Preset Mode gives you the option to scroll through your presets in
Manual Mode.
To turn Preset Mode on, follow these simple steps:
Settings include:
PRESET STORE
Preset Store allows you to save up to four preset stations. The default presets
are 88.1, 94.9, 100.9, and 107.9.
To store your own preset stations, follow these simple steps:
1. Using the dial, tune TransDock micro to the station you’d like to set –
turning right to tune to higher stations and left to tune to lower stations.
1. Press and hold the dial to enter the Settings Menu.
2. Scroll to Preset Mode and press the dial to select. Then choose Preset Mode
On and press to select. Now you can scroll through the four presets (P1, P2,
P3, P4) in Manual Mode.
3. Leave TransDock micro on the desired preset and tune your radio to the
corresponding frequency to begin broadcasting.
2. Press and hold the dial to enter the Settings Menu.
3. Once in the Settings Menu, scroll to Preset Store and press the dial to select.
Next, scroll to and select the preset number (SET 1, SET 2, SET 3, or
SET 4) and press to select.
10 | DLO TRANSDOCK MICRO USER GUIDE
| 11
AUDIO LEVEL
Audio Level gives you the option of selecting the volume output level that fits
your particular audio. Turn the dial right or left to select from: Low, Medium
or High.
LISTENING MODE
Listening Mode allows you to choose between Mono and Stereo. TransDock
micro defaults to Mono for optimal transmitter performance. To learn more
about Listening Mode please read Getting the Best Sound Quality with
TransDock micro [pg. 13].
BRIGHTNESS TIME
Brightness Time allows you to change the length of time that the TransDock
micro’s display screen stays active. Scroll through to select: Always On,
2 seconds, 5 seconds, 10 seconds, 15 seconds, or 20 seconds
BRIGHTNESS LEVEL
Brightness Level controls the brightness of the OLED display while TransDock
micro is active. Turn the dial right for higher intensity and left for lower intensity.
DIM LEVEL
Dim Level controls the brightness of the OLED display while TransDock micro
is inactive. Turn the dial right for higher intensity and left for lower intensity or
completely off.
12 | DLO TRANSDOCK MICRO USER GUIDE
RESET SETTINGS
Reset Settings allows you to revert back to the factory settings. To do so, press
the dial when on Reset Settings. TransDock micro will ask you if you are sure
you would like to reset your settings. Press the dial once to accept, or turn right
or left to return to the Settings Menu.
Getting the Best Sound Quality with TransDock micro
• Use IntelliTune to automatically find the optimal frequency to broadcast
your iPhone over your car’s FM stereo. Then, tune your car’s FM stereo to
the frequency displayed on TransDock micro.
• Choosing between Mono and Stereo in Listening Mode: Mono allows for
much better transmitter performance, while Stereo allows for the best
sonic musical performance.
NOTE: If static or distortion increases, switch to Mono for the best transmitter
performance possible.
• To get the best initial performance from TransDock micro, it is very important
that you set your iPhone EQ to Off and adjust your car’s bass and treble
controls to 0. Then you can experiment with adding bass and treble to your
desired level.
| 13
Tips + Troubleshooting
My music is playing, but there seems to be a lot of static.
Use IntelliTune to automatically find the optimal frequency to broadcast
your iPhone over your car’s FM stereo. Then, tune your car’s FM stereo to the
frequency displayed on TransDock micro. You may also try setting the Listening
Mode to Mono, which will improve the clarity of TransDock micro’s signal.
My radio will only scan/seek to occupied FM stations.
Many car radios default to scan/seek mode for tuning, so they automatically tune
to a radio station. Most of these radios can be switched to manual tuning (consult
your car or radio manual on how to do this).
If I leave TransDock micro plugged into my car’s power outlet, will it drain my
car battery?
Probably not, but it’s always a good idea to unplug anything when leaving your
car for a long period of time.
NOTE: Your TransDock micro will continue to draw power from your car’s battery
as long as a device is attached.
Can I use TransDock micro with other devices?
TransDock micro is designed specifically for use with iPhone and other
iPod models.
My music sounds overdriven and distorted.
Be sure that the FM station you’re using is still unoccupied as you drive
through different areas. FM signals can intrude on an unused frequency.
Be sure to set your iPhone EQ to Off and adjust your car’s bass and treble controls
to 0. Then you can experiment with adding bass and treble to your desired level.
However, we highly recommend that you start with everything at 0.
My iPhone does not appear to be charging when connected to TransDock micro.
Make sure TransDock micro is securely positioned in your car’s power outlet.
You may also check to ensure that the connector cable is all the way into the
iPhone’s dock connector.
14 | DLO TRANSDOCK MICRO USER GUIDE
| 15
Tech Specs
FM TRANSMITTER
Service + Support
For Customer Service please visit http://www.dlo.com or call 1-800-233-8413.
Modulation: FM Stereo
Default Preset Frequencies (MHz): 88.1, 94.9, 100.9, and 107.9
Frequency Adjustment: 0.2 MHz per step
Frequency Response: 20Hz ~ 15KHz
Transmitter Range: Up to 27 feet (8.2M)
Tuning: Digitally controlled crystal oscillator
International frequency compatible
CONNECTIONS
30-Pin iPhone Dock Connector Cable: Length 48”
POWER
Input Voltage: 12 – 18 VDC, 3 Watts
Input Current: 5 VDC, 500mA
Replaceable Fuse: 2A
TEMPERATURE
Storage Temperature: -10° to 120° F (-23° to 49° C)
Operating Temperature: -4° to 113° F (-20° to 45° C)
16 | DLO TRANSDOCK MICRO USER GUIDE
| 17
FCC Statement
Warranty
Federal Communications Commission Interference Statement
One Year Limited Warranty
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
DLO warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for a period of one year from the date of purchase. This
warranty extends only to the original purchaser of the product, and is not transferable. To exercise your rights under this warranty, you must provide proof of
purchase in the form of an original sales receipt that shows the product name
and the date of purchase. For customer support or to obtain warranty service,
please visit www.dlo.com. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. DLO liability is limited to repair or, at its sole option, replacement of
the product. Incidental, special and consequential damages are disclaimed
where permitted by law. This warranty gives you specific legal rights. You may
also have other rights that vary from state to state.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
18 | DLO TRANSDOCK MICRO USER GUIDE
| 19
Thanks for purchasing TransDock micro for iPhone
Enjoy the Ride