Samsung DIGIMAX 230 User`s manual

SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : +44 (0) 1932 455300
FAX : +44 (0) 1932 455325
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : (49) 6196 66 53 03
FAX : (49) 6196 66 53 66
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2282/5
FAX : (33) 1-4320-4510
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
ENGLISH
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-8867
FAX : (86) 22-2761-8864
User's Manual
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-1998
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images, downloading images and
using the application software. Please read this manual carefully before using your new camera.
Instructions
Use this camera in the following order
Set up the
camera driver
Before connecting the camera to a PC, via the
USB cable, you will need to set up the camera
driver. Install the camera driver that is contained in
the Application S/W CD-ROM.(p.101)
Take a picture (p.23)
Take a picture
Insert the
USB cable
Check the
camera’s power
Check
[Removable Disk]
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection
terminal.(p.109)
Check the camera’s power
If the power is turned off, press the camera button
to power it on.(p.29)
Open Window s EXPLORER and search for
[Removable Disk].(p.110)
To play back a video shot with this camera, be sure to use the QuickTime player supplied on
the software CD-ROM. Applications that do not support the MPEG-4 codec
(e.g., Windows Media Player) may not be able to play back the video.
If you use a card reader to copy the images on the memory card to your PC, the images
could be damaged. When transferring the images taken with the camera to your PC, be sure
to use the supplied USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on the memory card due
to the use of a card reader.
2
Contents
READY
TELE Zoom
30
WIDE Zoom
30
Getting to know your camera
5
Voice memo/ UP button
32
About the icons
5
Recording a voice memo
32
Danger
6
Macro/ Down button (Focusing)
33
Warning
6
Focus lock
34
Caution
7
FLASH/ LEFT button
35
An FCC warning
7
Self-timer / Remote / Right button
37
This digital camera can be used for
8
MENU/ OK button
39
Manufacturer's contents
10
S button
39
Identification of features
11
MF button
45
Front & Top
11
LCD button
46
Back & Bottom
12
AEL button (Automatic Exposure Lock)
46
Side/ 5-function button
13
Using the LCD monitor to adjust the camera
Mode dial
13
settings
47
Connecting to a Power Source
16
How to use the menu
49
Using the batteries
16
Size
49
Removing the battery
16
Quality
50
Metering
51
Effect
51
Sharpness
52
Using the AC power adapter
(SAC-51, 5.0V)
17
Instructions on how to use the
memory card
18
Continuous shot
52
Inserting the memory card
20
Save / Load the camera configuration
53
Removing the memory card
20
Scene
54
When Using the Camera for the First Time
21
PLAY
RECORDING
Starting play mode
55
LCD monitor indicator
22
Playing back a still image
55
Starting the recording mode
23
Playing back a movie clip
56
Playing back a recorded voice
56
LCD monitor indicator
57
Things to Watch Out for When Taking
Pictures
28
Using the camera buttons to adjust the
Using the camera buttons to adjust the
camera
29
camera
58
POWER button
29
Thumbnail/ Enlargement button
58
SHUTTER button/ Jog dial
29
Voice memo/ Up button
59
ZOOM W/T button
29
Play & Pause/ Down button
60
3
Contents
LEFT/ RIGHT/ MENU/ OK button
61
Quick view
87
LCD button
61
Connecting an External Device (USB)
87
Delete button
62
Initialization(RESET ALL)
88
COPY button
63
Select card
88
Setting up the MYCAM menu
89
Setting up the play back function using the
LCD monitor
64
Start up image
89
Deleting images
66
Start up sound
90
Copy Pictures
67
Shutter sound
90
Protecting images
68
Important notes
91
Starting the slide show
69
Warning indicator
93
Resize
70
Before contacting a service center
94
Rotating an image
71
Specifications
97
DPOF
71
DPOF : STANDARD
72
DPOF : INDEX
72
DPOF : PRINT SIZE
73
Software Notes
DPOF : CANCEL
73
System Requirements
PictBridge
74
About the software
100
PictBridge: Picture Selection
75
Setting up the application software
101
PictBridge: Print Setting
76
Starting PC Mode
109
PictBridge: Picture Printing
77
Removing the USB Driver for
PictBridge : DPOF AUTO PRINT
78
Windows 98SE
112
PictBridge : RESET
78
Removable Disk
113
Removing the removable disk
114
Setting up the USB Driver for MAC
115
Using the USB Driver for MAC
115
SETUP
SOFTWARE
99
99
Setup menu
79
Digimax Viewer 2.1
116
File name
80
Using PhotoImpression
117
Auto power off
81
FAQ
119
Language
82
Formatting a memory card
82
Setting up the Date/ Time/ Date type
83
Imprinting the recording date
83
Function lamp
84
Sound
85
LCD brightness
85
Selecting Video out type
86
4
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
Prior to using this camera, please read the user manual thoroughly.
When you require After Sales service, please bring the camera and the cause of the camera
malfunction (such as Batteries, Memory card etc.) to the A/S center.
Please check that the camera is operating properly prior to when you intend to use it (e.g. for
a trip or an important event) to avoid disappointment. Samsung camera takes no
responsibility for any loss or damages that may result from camera malfunction.
Keep the manual in a safe place.
Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation
incorporated in the United States and/or other countries.
Apple, Mac and QuickTime logo are registered trademarks of Apple computer.
Memory Stick Duo is a registered trademark of Sony Corporation.
All brand and product names appearing in this manual are registered trademarks of their
respective companies.
About the icons
This manual contains instructions on using this camera that will help you to use this camera
safely and correctly. This will help prevent danger and injury to others.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided,
may result in a minor or moderate injury.
5
Danger
Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock
or severe damage to you or your camera. Internal inspection, maintenance and repairs
should be carried out by your dealer or Samsung Camera Service Center.
Please do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the
camera, and then disconnect the power source (batteries or AC Power Adapter). You must
contact your dealer or Samsung Camera Service Center. Do not continue to use the camera
as this may cause a fire or electric shock.
Do not insert or drop metallic or inflammable foreign objects into the camera through access
points e.g. the memory card slot and battery chamber. This may cause a fire or electric
shock.
Do not operate this camera with wet hands. This could pose a risk of electric shock.
Warning
Do not use the flash in close proximity to people or animals. Positioning the flash too close to
your subject’s eyes, may cause eyesight damage.
When taking photographs, never point the lens of the camera directly into very strong light.
This may result in permanent damage to your eyesight.
For safety reasons keep this product and accessories out of reach of children or animals to
prevent accidents e.g.:
Swallowing batteries or small camera accessories. If an accident should occur, please
consult a doctor immediately.
There is the possibility of injury from the camera’s moving parts.
Batteries and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it
time to cool.
Do not recharge non rechargeable batteries. This may cause an explosion.
Do not leave this camera in places subject to extremely high temperatures, such as a sealed
vehicle, direct sunlight or other places of extreme variances in temperature. Exposure to
extreme temperatures may adversely affect the camera s internal components and could
cause a fire.
When in use, do not cover the camera or AC Power Adapter. This may cause heat to build up
and distort the camera body or cause a fire. Always use the camera and its accessories in a
well-ventilated area.
6
Caution
Leaking, overheating, or burst batteries could result in fire or injury.
Use batteries with the correct specification for the camera.
Do not short circuit, heat or dispose of batteries in fire.
Do not insert the batteries with the reverse polarities.
Remove the batteries when not planning to use the camera for a long period of time.
Batteries may leak corrosive electrolyte and irreparably damage the camera's components.
Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after
using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using the AC Power Adapter.
After use, always switch off the camera before unplugging the adapter from the wall socket.
Then make sure that any connector cords or cables to other devices are disconnected before
moving the camera. Failure to do so may damage the cords or cables and cause a fire or
electric shock.
A non-rechargeable (disposable) battery can be used but has a short lifespan because of its
relatively low battery capacity. We recommend the rechargeable battery which has a bigger
capacity and longer lifespan than the non rechargeable type. (Rechargeable batteries may
not be available everywhere).
An FCC warning
This device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection against
harmful interference in commercial installation. This equipment generates, absorbs and
can emit radio frequency energy. If it is not installed and used in accordance with the
instructions, it may cause harmful interference to radio communication. There is
however, no guarantee that interference will not occur in some situations. Should any
interference occur when this device is in operation, please try one or more of the
following measures.
Change the location and direction of any aerial.
Increase distance between the camera and the affected device.
Use a different socket away from the affected device.
Please contact a Samsung agent or a radio/TV engineer.
This device complies with part 15 of the FCC Rules.
Changes or modifications not expressly approved by the party responsible for
compliance could void user's authority to operate the equipment.
7
This digital camera can be used for
Viewing images on a TV.
(refer to page 86)
Printing images using a dedicated printer,
DPOF and PictBridge compatible printer or a
DPOF-equipped photo lab.
(refer to page 71~78)
Down loading image files
from camera to computer.
(refer to page 110)
Taking a picture.
(refer to page 23~54)
Editing images on a PC.
(refer to page 117)
8
This digital camera can be used for
Creation of a digital photo album.
Recording your voice.
(refer to page 25)
You can even create your own unique gift wrap
paper by using your digital images.
Taking a self-portrait and using the image
to personalize calendar.
Recording a movie clip.
(refer to page 26)
Inserting images directly into any
electronic document.
9
Manufacturer's contents
Please check that you have the correct contents before using this product.
marked contents are optional.
Digital Camera
Pouch
AV cable
USB cable
Camera strap
User manual
Product warranty
Software CD
Remote control
SD memory card
Memory Stick Duo
AC adapter
(SAC-51, 5.0V)
2 AA Alkaline
Batteries
Digimax Power Pack : SLB-1437A KIT
Battery charger Rechargeable
(SBC-L2)
battery
10
AC cord
Digimax Battery I-Pack : SBP-1303 KIT
Battery
charger
Rechargeable
battery
AC cord
Identification of features
Front & Top
Mode dial
Power button
Mode dial lamp
Shutter button
Flash light amount sensor
Jog dial
Speaker
Flash
Auto Focus
lamp
Viewfinder
Lens ring
Lens
Microphone
Function lamp& Self-timer lamp
Remote control sensor
SCL-T3755/W3755 conversion lens and SLA-3537 connection adapter are designed for the
Digimax digital cameras. They are sold separately depends on the camera model.
Please check local retailers for the purchase. Please see page 31 or included manual for the
usage.
Conversion lens adapter
Model Name: SLA-3537
Used to attach a WIDE/ TELE conversion
lens to the camera.
TELE Conversion lens
Model Name: SCL-T3755
Extends camera lens focus to 1.7 times.
WIDE conversion lens
Model Name: SCL-W3755
Extends camera lens focus to 0.7 times.
11
Identification of features
Back & Bottom
LCD button
Flash indicator lamp(Red)
Autofocus indicator lamp(Green)
Zoom W button
(Thumbnail)
Viewfinder
MF/ DELETE button
Zoom T button
(Digital zoom)
AEL/ COPY button
Strap eyelet
S button
LCD monitor
5-function button
DC input
connection
point
Tripod socket
Play mode button
USB/ AV connection terminal
* When using the digital zoom to take a picture, the composition of the picture may be different
depending on whether you are using the LCD monitor or the viewfinder. The picture will be
taken in the composition of the picture as it appears on the LCD monitor.
INFORMATION
Please keep the LCD monitor closed while not using the camera.
Please do not over twist the rotational LCD monitor to prevent camera damage.
Rotational range : 180 degrees horizontal to the camera.
180 degrees to forward and 90 degrees to backward while opened.
Please do not flip or twist the LCD monitor to the arrow direction.
12
Identification of features
Side/ 5-function button
Battery
holder
Battery
chamber cover
Voice memo/ UP button
SELF-TIMER/
RIGHT button
FLASH/
LEFT
button
SD(MMC)
memory
card slot
MENU/ OK button
Memory Stick
DUO slot
Macro / DOWN button
Play & Pause button
Battery chamber
Mode dial
You can select the desired working mode by using the mode dial located on the top of the
camera. This digital camera has 8 recording modes. These are listed below.
AUTO mode
Please select this mode for quick and easy picture taking
with minimal user interaction.
PROGRAM mode
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all
functions except the iris and shutter speed.
13
Identification of features
A/S/M mode
The Aperture and Shutter can be set manually in the ASM
mode.
- A : Aperture priority mode
- S : Shutter priority mode
- M : Manual mode
MySET mode
This mode allows users to save frequently used shooting
settings for later use.
VOICE RECORDING mode
A voice recording can be recorded for as long as the available
recording time of the memory capacity allows.(Max : 1 hour)
- Voice recording file type : *.wav
MOVIE CLIP mode
A movie clip can be recorded for as long as the available
recording time of the memory capacity allows.
- Image size
: 640x480, 320x240 (user selectable)
- Movie clip file type : *.mov
NIGHT SCENE mode
This mode is used at night or against a dark background.
SCENE mode
Use the menu to easily configure optimal settings for a variety
of shooting situations including portrait, children, landscape,
close-up, sunset, dawn, backlight, fireworks, beach scenes,
and snowscape.
14
Identification of features
Function lamp & Self-timer lamp
Function
Description
Power on
Blue light blinks and then turns off when the camera is ready to take a picture.
After taking a picture
Blue lamp blinks once.
While movie recording
Blue lamp blinks at a 1-second interval.
While voice recording
Blue lamp blinks at a 1-second interval.
After selecting the remote controller mode
Blue lamp blinks at a 1-second interval.
While the self timer
is functioning
For the first 7 seconds, the lamp blinks at 1 second intervals.
For the final 3 seconds, the lamp blinks quickly at 0.25 second intervals.
* The lamp will function while using the self-timer even if the
configuration is set to off the lamp.
(Based on 10-second Self-timer; see p. 37)
Auto focus indicator lamp
Color
Status
Camera Status
Blinking
Recording Mode (lightly press the shutter button): Not focused.
PC Mode: Transmitting Data.
On
Recording Mode (lightly press the shutter button): Focused.
PC Mode: When the USB cable is inserted.
Green
Mode dial lamp
Color
Status
Green
On
Camera Status
Turned off the LCD with the LCD button.
Flash indicator lamp
Color
Status
Blinking
Red
On
Camera Status
Flash in the process of charging.
Flash ready.
Mode icons
MODE
AUTO PROGRAM
A/S/M
MySET VOICE RECORDING MOVIE CLIP NIGHT SCENE
PLAY
Icon
SCENE
MODE
PORTRAIT CHILDREN LANDSCAPE CLOSE-UP SUNSET DAWN BACKLIGHT FIREWORKS BEACH&SNOW
Icon
15
Connecting to a Power Source
There are two ways in which to provide the camera with power. You can use batteries or
alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5.0V 2.0A).
We recommend using batteries for a digital camera (Within a year from the date of
manufacture). The batteries are listed below.
Non rechargeable batteries : AA type
- Alkaline(High capacity), Ni-Mn(High capacity),
Ni-Zn(High capacity), Lithium
CR-V3 type - Lithium
Rechargeable batteries
: AA type
- Ni-MH (over 2300mAh), Ni-Cd (over 1100mAh)
CR-V3 type - SBP-1303
Exclusive type - SLB-1437
Using the batteries
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity(+/-).
1. Open the battery chamber
cover by pushing in the
direction of the arrow.
Removing the battery
2. Insert the batteries taking
note of the polarity (+ / -).
3. To close the battery
chamber cover, push it
until it clicks.
: Please use the following steps to remove the manufacturer’s
rechargeable battery SLB-1437.
1. Turn off the camera power. Open the battery chamber cover and
move the battery holder aside. The battery will be released.
2. Take out the battery and close the battery chamber cover.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
16
The batteries are fully
charged.
Prepare new
batteries.
There is no battery capacity.
Replace with new batteries.
Connecting to a Power Source
INFORMATION
Important information about battery usage
As for the AA type alkaline battery, you can only use the high capacity type.
Do not use the normal type alkaline battery.
When the camera is not used, turn off the camera power.
Do not recharge the non rechargeable batteries. It may cause an explosion.
Please remove the batteries if the camera will not be used for long periods.
Batteries can lose power over time and are prone to leaking if kept inside the camera.
We recommend high capacity ALKALINE batteries as manganese batteries cannot
deliver sufficient power.
Low temperatures (below 0 ) can affect the performance of the batteries and you may
experience reduced battery life.
Batteries will usually recover at normal temperatures.
Do not use old and new batteries at the same time.
During extended use of the camera, the camera body may become warm.
This is perfectly normal.
If the lamps blink once and camera doesn’t turn on by pressing the power button, it
means that there is no battery capacity. In this case, change the battery with new one.
Using the AC power adapter (SAC-51, 5.0V)
If you have access to a mains supply, using an AC
Adapter (SAC-51, 5.0V) allows the camera to be
used for long periods of time.
Plug the adapter into the connection point
(DC IN 5.0V) on the camera.
Remove the batteries from the camera when
using an AC adapter.
DANGER
Always turn off the power before taking the AC adapter out of the mains supply.
As with all mains powered devices, safety is important. Ensure that neither the camera
nor adapter comes into contact with water or metallic materials.
Please ensure that you use an AC adapter (SAC-51, 5.0V) with the correct specification
for the camera. Failure to do so may affect your warranty.
17
Instructions on how to use the memory card
Maintenance of the memory card
Be sure to format the memory card (see p. 82) if you are using a newly purchased memory
for the first time, if it contains data that the camera cannot recognize, or if it contains images
captured with a different camera.
Turn off the camera power whenever the memory card is being inserted or removed.
Repeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
Do not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
Please do not use or store in an environment where there are extremes in temperature.
Do not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
Please keep the memory card in its case when not in use.
During and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
Do not use a memory card that is used in another digital camera or memory card reader.
Do not use a memory card formatted by another digital camera or memory card reader.
Preserving the memory card data
If the memory card is subjected to any of the following, the recorded data may become
corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting
(formatting) or reading.
Samsung cannot be held responsible for lost data.
It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
If there is insufficient memory available : If you press the shutter button for the shot, a [CARD
FULL !] message will appear and the camera will not operate.
To optimize the amount of memory in the camera, replace the memory card or delete
unnecessary images stored on the memory.
18
Instructions on how to use the memory card
INFORMATION
If you open the battery chamber cover when the camera power is turned on, the power
will turn off automatically.(Except for the exclusive type SLB-1437 battery)
Don't remove the memory card when the Auto focus lamp(Green) is blinking as this
may cause damage to data in the memory card.
The camera can use SD Memory Cards, MMC (Multi Media Card), and Memory Stick Duo.
Please consult the enclosed manual for using the MMC and Memory Stick Duo.
The SD memory card has a write protect
switch that prevents image files from being
deleted or formatted.
By sliding the switch to the bottom of the SD
memory card, the data will be protected.
By sliding the switch to the top of the SD
memory card, the data protection will be
canceled. Slide the switch to the top of the SD
memory card before taking a picture.
Card pins
Write protect
switch
Label
[ SD(Secure Digital) memory card ]
When using a 32MB SD memory card, the specified shooting capacity will be as follows.
(These figures are intended as an indication of expected performance). These figures are
approximate as image capacities can be affected by variables such as subject matter.
Recorded image size
TIFF
SUPER FINE
FINE
NORMAL
30 FPS
15FPS
2592X1944
1
11
23
35
-
-
2272X1704
2
15
30
45
-
-
Still
2048X1536
3
18
36
53
-
-
image
1600X1200
5
30
61
91
-
-
1024X768
12
70
130
183
-
-
640X480
29
183
305
457
-
-
640X480
-
-
-
-
1MIN 50SEC 3MIN 35SEC
320X240
-
-
-
-
3MIN 35SEC
Movie
clip
6MIN 47SEC
19
Inserting the memory card
1. Turn off the camera’s power and pull the battery chamber cover in
the direction of the arrow to open.
2. Have the front of the memory card facing toward the front of the
camera (lens) and the card pins toward the back of the camera
(LCD monitor), and then push the memory card into the card slot
until you hear a click.
* When inserting the Memory Stick Duo, please have the card pins
side facing up(toward the lens). Be careful not to insert the Memory
Stick Duo into the SD memory card slot.
3. To close, push the battery chamber cover until you hear a click.
If the memory card does not slide in smoothly, do not attempt to
insert it by force. Check the direction of insertion, and then insert it
correctly. Do not insert the memory card the wrong way round.
Doing so may damage the memory card slot.
Removing the memory card
1. Turn the power off using the power button.
Open the battery chamber cover and press the memory card as
shown in the image and release.
2. Remove the memory card and close the battery chamber cover.
20
When Using the Camera for the First Time
If the camera is turned on for the first time, a menu will be displayed to set date, time and
language in the LCD monitor. This menu will not be displayed after setting up the date, time
and language. Set up the date, time and language before using this camera.
Setting up the date, time and date type
1. Select the [DATE.TIME] menu by pressing the UP/DOWN
button and press the RIGHT button.
SET UP
2. Press the UP/DOWN/LEFT/RIGHT button to select the
ENGLISH
LANGUAGE
desired sub menu and press the OK button.
04/05/01
DATE.TIME
RIGHT button
: Selects YEAR/ MONTH/ DAY/ HOUR
/ MINUTE/DATE TYPE
LEFT button
: Moves the cursor to the [DATE. TIME]
main menu if the cursor is at the first
item of the date and time setup. In all other instances, the cursor will
be shifted to the left of its current position.
UP/ DOWN button : changes the value of each item.
Setting up the language
1. Select the [LANGUAGE] menu by pressing the
UP/DOWN button and press the RIGHT button.
2. Select the desired sub menu by pressing the UP/ DOWN
button and press the OK button.
SET UP
LANGUAGE
DATE.TIME
ENGLISH
04/05/01
INFORMATION
Following languages are supported.
Type A : English, French, German, Spanish, Italian, Russian, Dutch and Portuguese.
Type B : English, Korean, Simplified Chinese, Traditional Chinese, Danish, Swedish,
Thai, and Malaysian.
Even if the camera is restarted, the language setting will be maintained.
21
LCD monitor indicator
The LCD monitor displays information about the shooting functions and selections.
[ Image & Full Status ]
No.
Description
1
Battery
2
Recording mode
3
Camera shake warning
p.28
4
Flash
p.35
5
Self-timer
p.37
6
Voice memo
p.32
7
Macro
p.33
8
Metering
p.51
9
SD card/ MS DUO indicator
10
Manual/ Continuous auto focus
11
Auto focus frame
12
Date/ Time
13
Exposure compensation
22
Icons
Page
p.16
1
p.13~14
p.45
2004.05.01 01:00 PM
p.40
LCD monitor indicator
14
White Balance
p.41
15
ISO
p.42
16
RGB
17
Sharpness
p.52
18
Image quality
p.50
19
Image size / Continuous shot
RGB
p.42
2592, 2272, 2048, 1600, 1024, 640 /
Number of available shots remaining
28
Remaining time (Movie clip/ Voice recording)
00:01:30/ 01:00:00
p.49
20
21
Optical/ Digital Zoom bar
Starting the recording mode
How to use the AUTO mode (
)
1. Insert the batteries (p.16). Insert the batteries taking note of the polarity (+ / -).
2. Insert the memory card. (p.20)
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date/time that is displayed on the LCD monitor is
incorrect, reset the date/time before taking a picture.)
5. Select the AUTO mode by rotating the mode dial.
6. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
7. Press the shutter button to capture an image.
INFORMATION
[ AUTO mode ]
If the auto focus frame turns to red when you press the shutter button down half way,
it means that the camera cannot focus on the subject. Should this be the case, the
camera is unable to capture an image clearly.
23
Starting the recording mode
How to use the PROGRAM mode (
)
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all functions
except the aperture value and shutter speed.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the PROGRAM mode by rotating the mode dial.
6. Press the menu button to configure advanced functions
such as image size (p.49), quality (p.50), metering
(p.51), picture effects (p.51), sharpness (p.52),
continuous shooting (p.52) and saving MYSET
settings(p.53).
7. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
8. Press the shutter button to capture an image.
[ PROGRAM mode ]
How to use the A/S/M mode ( A/S/M )
The Aperture and Shutter can be set manually in the A/S/M mode.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the A/S/M mode by rotating the mode dial.
6. Press the S button. If the ASM icon is not displayed, press the
Up and Down button to select the ASM icon.
7. Use the Left and Right buttons to select desired
shooting mode. A (Aperture priority mode),
S (Shutter speed priority mode), and M (Manual mode).
8. Press the OK button to load the selected shooting
mode.
9. Press the shutter button to capture an image.
Please see page 43 for details of the A/S/M shooting
mode.
[ A/S/M mode ]
24
Starting the recording mode
How to use the MySET mode (
)
This mode allows users to save frequently used shooting settings for later use.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the MySET mode by rotating the mode dial.
6. Press the menu button.
7. Use the Left/Right buttons to select the [LOAD] menu
tap. Use the Up/Down buttons to select desired MYSET
number.
8. Press the OK button to load the camera configuration
saved in the MYSET number and close the menu
screen.
9. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
10. Press the shutter button to capture an image.
Please see page 53 for details of the MYSET shooting
[ MySET mode ]
mode and menus.
How to use the VOICE RECORDING mode (
)
Steps from 1-4 are the same as those for AUTO mode.
5. Select the VOICE RECORDING mode by rotating the
mode dial.
6. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded for
as long as the available recording time (Max : 1 hour)
allows.
The recording time will be displayed on the LCD
monitor.
Voice will still be recorded if the shutter button is
released.
- If you wish to stop recording, press the shutter button
again.
- File type : *.wav
[ VOICE RECORDING mode ]
A distance of 40cm between you and the camera (microphone) is the best distance to record
sound.
25
Starting the recording mode
How to use the MOVIE CLIP mode (
)
Steps from 1-4 are the same as those for AUTO mode.
5. Select the MOVIE CLIP mode by rotating the mode dial.
6. The MOVIE CLIP mode icon and available recording time
will display on the LCD monitor.
7. Point the camera towards the subject and compose
the image by using either the viewfinder or LCD monitor.
Press the shutter button and movie clips are recorded
for as long as the available recording time.
Movie clips will still be recorded if the shutter button is
released. The auto focus lamp(green) will blink during
the movie clip recording.
* If you wish to stop recording, press the shutter button
again.
* Image size and type are listed below.
- Image size : 640x480, 320x240(Selectable)
- File type : *.mov
[ MOVIE CLIP mode ]
NIGHT SCENE mode (
)
This mode is used at night or against a dark background.
It is possible that camera shake will occur. If this is the
case, use a tripod to eliminate this.
Configure the shutter speed by zoom scale (Long Time
shutter) with the S button.
Please see page 44 for a detailed description for Long
Time shutter.
[ NIGHT SCENE mode ]
26
Starting the recording mode
How to use the SCENE mode (
)
Use the menu to easily configure optimal settings for a variety of shooting situations including
portrait, children, landscape, close-up, sunset, dawn, backlight, fireworks, beach scenes and
snowscape.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the SCENE mode by rotating the mode dial.
6. Press the MENU button and the SCENE mode menu will be
displayed.
7. Use the LEFT and RIGHT buttons to select the [SCENE]
menu tab.
8. Select the desired [SCENE] sub menu by pressing the
UP and DOWN buttons and press the OK button.
Please see page 54 for detailed descriptions for each
screen.
9. The current scene icon is displayed at the top left of the
LCD.
10. Point the camera towards the subject and compose
the image by using either the viewfinder or LCD
monitor.
[ SCENE mode ]
11. Press the shutter button to capture an image.
27
Things to Watch Out for When Taking Pictures
Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge. (See page. 29)
Press the shutter button all way down to take the picture.
[ Lightly press the shutter button ]
[ Press the shutter button ]
The available recording time may vary depending on shooting conditions and camera
settings.
When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera
shake warning indicator (
) may appear on the LCD monitor. In this case, use a tripod,
support the camera on a solid surface or change the flash mode to flash shot mode.
Compensated shooting against the light : Please do not take pictures to the sunlight direction.
Taking a picture against the sun may make the
picture dark. To take a picture against the sun,
please use the [BACKLIGHT] in the scene shooting
mode (see page 54), forced flash (see page 35),
spot side light (see page 51), or exposure
compensation (see page 40).
Avoid obstructing the lens or the flash when you capture an image.
As there can be some differences between what is seen through the Viewfinder and the
resulting image when taken at a range closer than 1.5m, it is recommended that you use the
LCD monitor to compose these shots.
Using the LCD monitor extensively will drain the batteries.
We recommend turning off the LCD monitor and using the optical viewfinder as often as
possible in order to extend battery life.
Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
28
Using the camera buttons to adjust the camera
The RECORDING(AUTO, PROGRAM, A/S/M, MySET, VOICE RECORDING, MOVIE CLIP,
NIGHT SCENE, SCENE) mode function can be set up by using the camera buttons.
POWER button
Used for turning the camera's power on / off.
If there is no operation during the specified time, the
camera's power will be turned off automatically to save
battery life. Pressing the power button for over 3 seconds
will deactivate the start-up sound function.
SHUTTER button/ Jog dial
Used for taking an image or recording voice in the
RECORDING mode.
In MOVIE CLIP mode
: Pressing the shutter button down fully starts the process for
recording a movie clip. Press the shutter button once and the
movie clip is recorded for as long as the available recording
time in the memory allows. If you wish to stop recording,
press the shutter button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the auto focus and checks the condition
of the flash.
Pressing the shutter button down fully takes the image and stores the relevant data regarding
the shot. If you select voice memo recording, the recording will start after the camera has
finished storing the image data.
Jog dial : Set focus distance while using the manual focusing (see page 45). Set the aperture
value and shutter speed in the A/S/M shooting mode (see page 43).
ZOOM W/T button
If the menu is not displayed, this button works as the
OPTICAL ZOOM or DIGITAL ZOOM button.
29
ZOOM W/T button
This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a
total zoom ratio of 15X.
TELE Zoom
Optical zoom TELE
Digital zoom TELE
: Pressing the ZOOM T button. This will zoom into the subject i.e.
the subject will appear nearer.
: When the maximum (3X) optical zoom is selected, pressing the
ZOOM T button activates the digital zoom software. Releasing
ZOOM T button stops the digital zooming at the required setting.
Once the maximum digital zoom (5X) is achieved, pressing the
ZOOM T button will have no effect.
Pressing the
ZOOM T button
[ WIDE zoom ]
WIDE Zoom
Optical zoom WIDE
Pressing the
ZOOM T button
[ TELE zoom ]
: Pressing the ZOOM W button. This will zoom out from the subject
i.e. the subject will appear further away. Pressing the ZOOM W
button continuously will set the camera to its minimum zoom
setting i.e. the subject appears at its furthest from the camera.
Pressing the
ZOOM W button
[ TELE zoom ]
Digital zoom WIDE
Optical zoom
Pressing the
ZOOM W button
[ Optical zoom 2X ]
[ WIDE zoom ]
: When the digital zoom is in operation, pressing the ZOOM W
button will reduce the digital zooming in steps. Releasing ZOOM W
button stops digital zooming. Pressing the ZOOM W button will
reduce the digital zoom and then it will continue to reduce the
optical zoom until the minimum setting is reached.
Digital zoom
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[ Digital zoom 5.0X ]
30
[ Digital zoom 5.0X ]
[ TELE zoom ]
[ WIDE zoom ]
ZOOM W/T button
Use the conversion lens
Use the optional conversion lens for more flexibility in setting the focus distance.
Types of the conversion lens
1. WIDE conversion lens : Install the WIDE conversion lens (model name: SCL-W3755) to
change the focus of camera lens in 0.7 times.
2. TELE conversion lens : Install the TELE conversion lens (model name: SCL-T3755) to
change the focus of camera lens in 1.7 times.
Focus distance and shooting range for each lens
Types of lens
Using the 3X camera lens
Focus
7.7 ~ 23.1mm
5.4mm
39.3 mm
35mm conversion distance
38 ~ 114mm
26.6mm
193.8 mm
80cm ~ Infinity
WIDE : 40cm ~ Infinity
TELE : 230cm ~ Infinity
WIDE : 1 ~ 40cm
TELE : 80 ~ 230cm
Auto
Shooting
range
Macro
WIDE
TELE
4 ~ 80cm
30 ~ 80cm
SCL-W3755 installed
SCL-T3755 installed
Installing the conversion lens
1. Turn the lens ring in the front of the
camera to the left to remove it.
2. Install the conversion lens adapter by
turning it to the right.
3. Install the WIDE or TELE conversion
lens by turning it to the right.
* While installing the adapter or
conversion lens, make sure
that they are securely fixed.
[Lens ring]
[Adapter]
[Conversion lens]
* Please view the included manual with
the lens for detailed usage of the
conversion lens.
31
ZOOM W/T button
INFORMATION
To use the digital zoom the LCD monitor has to be turned on.
Images taken using the digital zoom may take a little longer for the camera to process.
Allow time for this to take place.
The zoom function can’t be activated during the movie clip recording.
You may notice a decrease in image quality when using the digital zoom.
Take care not to touch the lens to avoid taking an unclear image and possibly causing
camera malfunction. If the image is dim, turn the camera power off and on again to
modify the lens position.
Take care not to press the lens as this may cause a camera malfunction.
When the camera is turned on, take care not to touch the camera's moving lens parts
as this may cause the resulting image to be dim and unclear.
Take care not to touch the lens during zoom operation as this may cause damage.
Voice memo(
) / UP button
While the menu is showing, press the UP button to move up the submenu cursor.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo (
) button. You can add your voice-over to a stored still image.
Recording a voice memo
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE
CLIP and VOICE RECORDING modes.
2. Press the VOICE MEMO ( ) button.
If the voice memo indicator is displayed on the LCD monitor, the setting is completed.
STOP:SHUTTER
[ Preparing for Voice Memo ]
32
[ Recording Voice Memo ]
Voice memo(
) / UP button
3. Press the shutter button and take a picture. The picture is stored on the memory card.
4. Voice memo will be recorded for ten seconds from the moment the picture is stored. In the
middle of the sound recording, pressing the shutter button will stop the voice memo.
INFORMATION
A distance of 40cm between you and the camera (microphone) is the best distance to
record sound.
Macro(
) / Down button (Focusing)
While the menu is showing, press the DOWN button to move from the main menu to a
submenu, or to move down the submenu cursor.
When the menu is not showing, you can use the MACRO/ DOWN button to take macro
pictures (within the distance range of 4-80 cm).
[ Auto focus ]
[ Macro ]
Types of focus modes and focus ranges (W: Wide, T: Tele)
Focus type
Auto
Focus range
80cm ~ Infinity
Macro (
W : 4 ~ 80cm
)
T : 30 ~ 80cm
INFORMATION
When the macro mode is selected, it is possible that camera shake will occur.
If this is the case, use a tripod to eliminate this.
When you take a picture within 30cm(MACRO focus), select the FLASH OFF mode.
33
Macro(
) / Down button (Focusing)
Available focusing method, by recording mode( O : Selectable , X : Not selectable,
: Infinity focus range)
Mode
Auto
O
O
O
O
O
O
O
O
Macro
O
O
O
O
O
O
O
X
Mode
Auto
O
O
Macro
X
X
X
X
O
O
X
X
X
O
X
X
Focus lock
To focus on the subject positioned outside of the center, use the focus lock function.
Using the Focus Lock
1. Ensure the subject in the center of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto lights up, it means the camera
is focused on the subject. Be careful not to press the SHUTTER button all the way down to
avoid taking an unwanted pictured.
3. With the SHUTTER button still pressed down only halfway, move the camera to
recompose your picture as desired, and then press the SHUTTER button completely to
take the picture. If you release your finger from the SHUTTER button, the focus lock
function will be canceled.
[ The image to be captured ]
34
[ Press the SHUTTER button ]
halfway and focus on the subject
[ Recompose the picture ]
and fully depress the
SHUTTER button
FLASH(
) / LEFT button
When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to the left
tab.
When the menu is not displayed on the LCD monitor, the
LEFT button operates as the FLASH (
) button.
Selecting the flash mode
[ Selecting the Auto flash ]
1. Rotate the MODE DIAL to select a RECORDING mode
with the exception of MOVIE CLIP and VOICE
RECORDING modes.
2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit
the environment.
Flash range
Unit : m
AUTOFOCUS
MACRO
ISO
AUTO
WIDE
TELE
WIDE
TELE
0.8~3.0
0.8~2.0
0.3~0.8
0.3~0.8
INFORMATION
Using the flash frequently will reduce the life of the batteries.
Under normal operating conditions the charging time for the flash is normally within 6
seconds. If the batteries are weak, the charging time will be longer.
During the continuous shot, movie clip mode, the flash function will not operate.
Take photographs within the flash range.
The image quality is not guaranteed if the subject is too close or highly reflective.
The LCD monitor is turned off for a while after using the flash to recharge it.
35
FLASH (
) / LEFT button
Flash mode indicator
Icon
Flash mode
Description
Auto flash
If the subject or background is dark, the camera flash will
operate automatically.
Auto &
Red eye
reduction
If a subject or background is dark, the camera flash will work
automatically and will reduce the red-eye effect by using the
red-eye reduction function.
Fill in flash
The flash fires regardless of available light.
The intensity of the flash will be controlled, according to the
prevailing conditions. The brighter the background or subject
is, the less intense the flash will be.
Slow synchro
The flash will operate in conjunction with a slow shutter speed
in order to obtain the correct exposure. We recommend using
a tripod for this function. When you take an image in a
condition with poor light, the camera shake warning indicator
(
) will display on the LCD monitor.
Flash off
The flash does not fire. Select this mode when capturing
images in a place or situation where flash photography is
prohibited. When you capture an image in a poorly lit condition,
the camera shake warning indicator (
) will display on the
LCD monitor.
Available flash mode, by recording mode
36
X
O
X
X
X
O
X
X
X
X
X
X
X
X
X
O
O
O
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
O
O
O
O
O
X
X
X
X
X
X
X
O
X
X
X
O
X
X
X
O
O
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
X
X
O
O
O
O
X
O
X
Self-timer(
) / Remote ( )/ Right button
When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor
shift to the right tab.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer (
) and Remote ( ) button. This function is used when the photographer would
also like to be in the image.
Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING mode
with the exception of VOICE RECORDING mode.
2. Press the SELF-TIMER (
) button until the desired
mode indicator displays on the LCD monitor.
A 2 second self-timer or 10 second self-timer icon
appears on the LCD monitor.
2SEC self-timer (
):
Pressing the shutter button will allow an interval of
2 seconds before the image is taken.
10SEC self-timer (
) :
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
3. When you press the SHUTTER button, the picture will
be taken after the specified time has elapsed.
[ Selecting the 10 SEC self-timer ]
INFORMATION
When taking a picture using the self-timer, the self-timer lamp works as follows:
2 second self-timer setting : The self-timer lamp blinks at 0.25 second interval for
2 seconds.
10 second self-timer setting : The self-timer lamp blinks at 1 second interval for the
first 7 seconds. It blinks at 0.25 second interval for the
remaining 3 seconds.
If you operate the Mode dial and Self-timer button during the self-timer operation, the
self-timer function is cancelled.
Use a tripod to prevent the camera from shaking.
While the remote controller icon is selected, the self-timer lamp in front of the camera
blinks in 1 second cycle.
37
Self-timer(
) / Remote ( )/ Right button
Using the remote controller.
1. Turn the mode dial to select shooting mode except the voice recording mode.
2. Press the self-timer (
) button repeatedly until the remote controller icon (
displayed in the LCD.
3. Press the remote controller shutter button for a 2 seconds delayed shooting.
) is
[ Remote controller shutter button ]
Replacing batteries for the remote controller
Make sure the + polarity is toward the top and the - polarity is toward the bottom while
installing batteries for the remote controller.
Replace batteries for the remote controller in the local service center.
Use the CR 2025 3V batteries.
38
MENU/ OK button
If the menu is displayed, use the 5-Function buttons to change the data values and for your
changes to be accepted
If the menu is not displayed, press the MENU/OK button to display a menu for the current
camera mode on the LCD monitor. Press the button again to return to the previous state.
Pressing
the MENU
button
[ Menu off ]
SIZE
2592X1944
2592
2272X1704
2272
2048X1536
2048
1600X1200
1600
1024X768
1024
[ Menu on ]
- There is no menu for VOICE RECORDING mode.
- The menu screen may not show on the LCD when another button is pressed or image data
is being processed. (The green lamp next to the view finder blinks)
- When the menu is showing on the LCD monitor, it is not possible to operate the shutter
button i.e. capture an image. To capture an image, simply cancel the menu display by
pressing the MENU button.
S button
You can use the S button to adjust the values for the exposure compensation, white balance,
ISO, RGB, A/S/M mode and longtime shutter.
Main menu
Sub menu
Exposure compensation
-2.0 ~ 0.0 ~ +2.0(0.5EV steps)
WHITE BALANCE
FLUORESCENT H, FLUORESCENT L,
Available camera mode
AUTO, DAYLIGHT, CLOUDY,
TUNGSTEN, CUSTOM.
ISO
AUTO, 50, 100, 200, 400
39
S button
Main menu
Sub menu
RGB
R(Red), G(Green), B(Blue)
A/S/M mode
A (Aperture priority mode)
S (Shutter priority mode)
M (Manual mode)
LT
Shutter speed, Aperture value
(Changed by zoom scale)
Available camera mode
Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions. You can also select the exposure value
by using the S button.
Compensating Exposure
1. Press the S button, and then use the UP and DOWN
buttons to select the exposure compensation icon (
).
The exposure compensation menu bar will appear as
shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor.
3. Press the OK button.
The value you set will be saved and the Exposure
Compensation setup mode will close.
If you change the exposure value, the exposure indicator (
) will be displayed on the
bottom of the LCD monitor.
* A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD
monitor will appear white or you may not get good pictures.
40
S button
White balance : The white balance control allows you to adjust the colours to appear more
natural looking.
Selecting a White Balance
1. Press the S button, and then use the UP and DOWN
buttons to select the white balance icon (
).
The white balance menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to set the white
balance to the desired value. The value you set will be
displayed on the LCD monitor.
AUTO
: The camera automatically
selects the appropriate white
balance settings, depending on the prevailing lighting conditions.
DAYLIGHT
: For taking images outside.
CLOUDY
: For taking images under a cloudy and overcast sky.
Fluorescent H
: For shooting under daylight fluorescent types of three-way
fluorescent lighting.
Fluorescent L
: Shooting under white fluorescent lighting.
TUNGSTEN
: For shooting under tungsten (standard light bulb) lighting.
CUSTOM
: Allows the user to set the white balance according to the shooting
condition.
Different lighting conditions may cause a colour cast on your images.
3. Press the OK button. The value you set will be saved and White Balance setup mode will end.
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment.
You can select the most appropriate white balance setting for a given shooting environment
by setting up the custom white balance.
1. Select the CUSTOM(
) menu of the White Balance.
2. Place a sheet of white paper in front of the camera so
that the LCD monitor shows only white, and then press
the shutter button.
3. Your custom white balance value is stored.
- The custom white balance value will be applied,
starting with the next picture you take.
- The user configured white balance will remain effective
until it is overwritten.
[ White paper ]
41
S button
ISO : You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
Selecting an ISO Sensitivity
1. Press the S button, and then use the UP and DOWN
buttons to select the ISO icon (
).
The ISO menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to select the desired
ISO sensitivity value.
- AUTO
: The camera's sensitivity is
automatically changed by
variables such as lighting value or
subject brightness.
- 50, 100, 200, 400 : You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity.
However, the image may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light is and therefore the
greater its capacity to take pictures in dark conditions. However, the noise level in the
image will increase as the ISO value increases, making the image appear coarse.
3. When you press the OK button, the value you set will be saved and ISO setup mode will end.
RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured.
Setting RGB Values
1. Press the S button, and then use the UP and DOWN
buttons to select the RGB icon ( RGB ). The RGB menu
bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/ Down Button : Navigates between R, G, and B
icons.
- Left/ Right Button : Changes value of each icon.
3. When you press the OK button, the value you set will be saved and RGB setup mode will
end.
42
S button
A/S/M : The user can manually set shutter speed or aperture value in the menu.
Selecting the A/S/M shooting mode.
1. Turn the mode dial to select the ASM shooting mode.
2. Press the S button and use the Up and Down buttons to
select the A/S/M shooting mode icon ( ASM ) to open
the A/S/M shooting mode menu as shown in the picture.
3. Press the Left and Right buttons to select desired option
for the A/S/M shooting mode and press the S button.
- A (Aperture priority) shooting mode
: Set the aperture value for automatic exposure
depends on the brightness of the object by automatic shutter speed setting in the
camera. Turn the jog dial to the left or right to change the aperture value.
- S (Shutter priority) shooting mode
: Set the shutter speed for automatic exposure depends on the brightness of the object by
automatic aperture value setting in the camera.
Turn the jog dial to the left or right to change the shutter speed.
- M (Manual) shooting mode
: The user can manually set both the aperture value and the shutter speed.
Press the AEL button to select shutter speed or aperture value.
Rotate the jog dial to change the values.
If the set aperture value or shutter speed is out of
supported range(Between 2.0), the deviation of
exposure value is displayed red in the LCD by
pressing the shutter button down half way.
Please adjust the shutter speed so that the red warning
message becomes white.
43
S button
Long Time shutter : This camera automatically adjusts the shutter speed and aperture values
to the shooting environment. However, in NIGHT SCENE mode, you can
set the shutter speed and aperture values to your preference.
Adjusting the shutter speed and aperture values
1. Select the NIGHT SCENE mode by rotating the mode
dial.
2. Press S button and Long Time shutter menu (LT, For
selecting shutter speed and aperture value) will be
displayed.
3. Configure the Long Time shutter value with the up/
down/ left/ right button.
Up/ Down Button : Select the Aperture value / shutter speed.
Left/ Right Button : Change the value. Available aperture value options, depending on
zoom step will be displayed on the menu.
4. Press the OK button. The value you set will be saved and the mode will switch to NIGHT
SCENE mode. Press the SHUTTER button to take the picture.
Aperture values and shutter speeds that can be selected for each zoom position are as
follows :
- Aperture range
: AUTO, F2.7 ~ F11
- Shutter speed range : AUTO, 1/2,000 ~ 15S
Large
Aperture Value
(Press left button)
Small
(Press right button)
F 2.7
1/60
Fast
(Press left button)
44
Shutter Speed
Slow
(Press right button)
MF button
Use this button to select the focusing method. Repeatedly press the MF button to rotate [Manual
focusing] [Continuous automatic focusing] [Automatic focusing].
Automatic focusing
: Slightly press the shutter to let the camera measure
distance to the object and select the best focusing.
If successfully focused with the slight press of the shutter,
the automatic focusing mark is turned green.
Manual focusing
: Where the automatic focusing is not available such as very
dark place, use the manual focusing. Picture may become
blurring. Please be careful while using the manual focusing.
Continuous automatic focusing : The camera keeps focusing while the object is moving even
if the shutter button is not slightly pressed.
Note that using the Continuous automatic focusing uses
more battery than the Automatic focusing does.
Modes where the Continuous automatic focusing is available
: Program, A/S/M mode, Children mode in the scene shooting modes, and MySET mode.
If selected, the CAF icon is displayed in the bottom of the LCD.
Manual focusing.
1. Press the MF button to display the MF bar.
The MF icon is displayed in the bottom of the LCD.
2. Use the jog dial to set the focus distance.
Turn to the left : Move the focus farther.
Turn to the right : Move the focus closer.
m
cm
Close-up
Long distance
INFORMATION
Focus distance of 0.04~0.3m are only supported in the Wide zoom.
The flash is fixed as not available.
The focus value displayed in the LCD while manually focusing is measured from the
end of the lens
45
LCD button
You can check the recording status in the LCD monitor.
In any mode with the exception of VOICE RECORDING mode,
pressing the LCD button will change the display as shown below.
Pressing
the LCD
button
[ Image & full information ]
Pressing
the LCD
button
[ Image & basic information ]
Pressing
the LCD
button
[ Inverted image ]
[ LCD off ]
Pressing the LCD button
When taking photographs from the front, the video output may be displayed inverted on the
LCD monitor (upside down when shooting vertically, right and left flipped when shooting
horizontally). For such cases, press the LCD button twice to flip the video output 180 degrees
to restore normal view on the LCD monitor.
If the background image is too bright to view the menus, press the LCD button and the
background image turn to black to view clear menus.
If the LCD monitor is turned off, the mode dial lamp will light up.
AEL button (Automatic Exposure Lock)
The camera measures brightness of the object and automatically set the best exposure
value. If difference between the exposure values of the object and background is too great,
use the AEL button to manually set the exposure value against sunlight or in strong light.
This button is available in the AUTO, PROGRAM, MOVIE CLIP, SCENE mode.
Use the automatic exposure lock.
1. Ensure the subject in the center of the autofocus frame.
2. Move the camera to point the automatic focus mark on the object of desired exposure.
3. Press the AEL button to lock the exposure and display the AEL icon in the bottom of the
LCD.
4. Focus the camera again and press the shutter button again for shooting.
- The automatic exposure lock function is automatically unset after taking one picture.
[ Screen for shooting ]
46
[ Focus to the object and ]
press the AEL button
[ Refocus and fully press ]
the shutter button
Using the LCD monitor to adjust the camera settings
You can use the menu on the LCD monitor to set up recording functions. In any mode with
the exception of VOICE RECORDING mode, pressing the MENU button displays the menu
on the LCD monitor.
INFORMATION
The menu will not be displayed on the LCD monitor in the following circumstances:
- When another button is being operated.
- While image data is being processed. (when the green lamp next to the viewfinder blinks)
- When there is no battery capacity.
When the menu is showing on the LCD monitor, it is not possible to operate the shutter
button i.e. capture an image.
To capture an image, simply cancel the menu display by pressing the MENU button.
The following functions are available, depending on the mode you have selected.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Camera working mode
Page
2592X1944
2272X1704
2048X1536
p.49
SIZE
1600X1200
1024X768
640X480
640X480
p.49
320X240
30FPS
FRAME RATE
p.50
15FPS
TIFF
QUALITY
S.FINE
p.50
FINE
NORMAL
MULTI
METERING
p.51
SPOT
47
Using the LCD monitor to adjust the camera settings
Menu tab
Main menu
Sub menu
Camera working mode
Page
NORMAL
B&W
EFFECT
SEPIA
p.51
NEGATIVE
SOFT
SHARPNESS
NORMAL
p.52
VIVID
SINGLE
SHOOTING
CONTINUOS
p.52
AEB
MYSET1
LOAD
MYSET2
p.53
MYSET3
MYSET1
SAVE
MYSET2
p.53
MYSET3
SCENE
PORTRAIT
CHILDREN
LANDSCAPE
CLOSE UP
SUNSET
DAWN
BACKLIGHT
FIREWORKS
BEACH&SNOW
* Menus are subject to change without prior notice.
48
p.54
How to use the menu
1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
However, there is no menu for Voice Recording mode (
).
2. Use the LEFT and RIGHT buttons to navigate through the menus.
Press the
LEFT or
RIGHT button.
2592
QUALITY
TIFF
SUPER FINE
FINE
NORMAL
TIFF
Press the
LEFT or
RIGHT button.
2592
METERING
MULTI
SPOT
2592
EFFECT
NORMAL
B&W
SEPIA
NEGATIVE
3. Use the UP and DOWN buttons to select a sub menu.
Press the UP
or DOWN
button.
SHARPNESS
SOFT
NORMAL
VIVID
Press the UP
or DOWN
button.
SHARPNESS
SOFT
NORMAL
VIVID
SHARPNESS
SOFT
NORMAL
VIVID
4. Select a sub menu, and then press the OK button. The value you set will be saved and the
menu will disappear.
Size
You can select the image size appropriate for your application.
Mode
Icon
Size
STILL IMAGE mode
2592
2272
2048
1600
MOVIE CLIP mode
640
640
320
640X480
640X480
320X240
1024
2592X1944 2272X1704 2048X1536 1600X1200 1024X768
30fps
SIZE
SIZE
2592X1944
2272X1704
2048X1536
1600X1200
1024X768
2592
2272
2048
1600
1024
[PROGRAM mode]
640X480
320X240
640
320
[ MOVIE CLIP mode ]
INFORMATION
The higher the resolution, the lower the number of available shots will be because high
resolution images require more memory than lower resolution images.
49
Quality
You can select the compression ratio appropriate for your
application of the captured images. The higher the
compression ratio, the lower the picture quality.
2592
QUALITY
TIFF
SUPER FINE
FINE
NORMAL
TIFF
[PROGRAM mode]
STILL IMAGE mode
Mode
MOVIE CLIP mode
Icon
TIFF
Sub menu
TIFF
S.FINE
FINE
NORMAL
30FPS
15FPS
File Format
tif
jpeg
jpeg
jpeg
mov
mov
INFORMATION
TIFF is the highest quality and NORMAL is the lowest setting.
Choose the setting appropriate for your needs.
The TIFF file format is for professionals and provides the best quality.
However, large file size reduces number of available pictures to take and increases
saving time to the memory card.
[PLEASE WAIT !] message is displayed while saving a TIFF file to the memory card.
This file format complies with the DCF(Design rule for Camera File system).
JPEG (Joint Photographic Experts Group): JPEG is the image compression standard
developed by the Joint Photographic Experts Group. This type of compression is most
commonly used for compressing photos and graphics because it can compress the files
efficiently without damaging the data.
50
Metering
If you cannot obtain suitable exposure conditions, you can change the metering method to
take brighter pictures.
MULTI (
SPOT (
) : Exposure will be calculated based on an
average of the available light in the
image area.
However, the calculation will be biased
towards the centre of the image area.
This is suitable for general use.
2592
METERING
MULTI
SPOT
) : Only the rectangular area in the center of
[ PROGRAM mode ]
the LCD monitor will be metered for light.
This is suitable when the subject in the center is exposed correctly,
regardless of the back lighting.
Effect
By using the camera's digital processor, it is possible to add special effects to your images.
2592
640 30fps
EFFECT
EFFECT
NORMAL
B&W
SEPIA
NEGATIVE
NORMAL
B&W
SEPIA
NEGATIVE
[ PROGRAM mode ]
[ MOVIE CLIP mode ]
NORMAL
B&W
SEPIA
: No effect is added to the image.
: Converts the image to black and white.
: Captured images will be stored in a sepia tone (a gradient of yellowish brown
colours).
NEGATIVE : Save the image in negative mode.
51
Sharpness
You can adjust the sharpness of the picture you want to
take. You cannot check the sharpness effect on the LCD
monitor before you take a picture, because this function is
applied only when the captured image is stored on the
memory.
SHARPNESS
SOFT
NORMAL
VIVID
[ PROGRAM mode ]
Sub menu
Icon
Description
The edges of the image are softened.
This effect is suitable for editing images on your PC.
SOFT
The edges of the image are sharp.
This is suitable for printing.
NORMAL
The edges of the image are emphasized. The edges will
appear sharp, but noise may occur in the recorded image.
VIVID
Continuous shot
If you select CONTINUOUS or AEB, the flash will automatically be set to Flash Off.
[SINGLE]
: Take one picture only
[CONTINUOS] : Take three pictures in a series by pressing
the shutter button only once.
[AEB]
: Take three pictures in a series in different
exposures: over exposure (+0.5EV),
SHOOTING
SINGLE
CONTINUOUS
AEB
standard exposure (0.0EV), and short
exposure (-0.5EV). Use the mode if it is
[ PROGRAM mode ]
hard to decide exposure of the object.
INFORMATION
If less than 3 pictures are available in the memory, the Sequential and the AEB shooting
are not available.
It is best to use a triangular support for the AEB shooting for saving time is long and
hand shaking may occur.
The Digital zoom is not supported in the Sequential and AEB shootings.
52
Save / Load the camera configuration (MySET)
Use the MySET mode to save frequently used camera settings (SAVE) and use it later (LOAD)
Saving the camera configuration : Available in the PROGRAM, A/S/M and NIGHT SCENE
shooting modes.
1. Use the camera buttons and menu to set desired
camera configuration.
2592
SAVE
MOVE:
SET:OK
2. Press the menu button in any modes except AUTO,
MYSET 1
VOICE RECORDING, MySET, MOVIE CLIP or SCENE
MYSET 2
mode.
MYSET 3
3. Press the Left/Right buttons to select the [SAVE] menu
tap.
4. Press the Up/Down buttons to select desired MySET
[ PROGRAM mode ]
slot number to save.
5. Press the OK button to save the current configuration in
the selected MySET slot and close the menu.
Loading the saved camera configuration: available in the
MySET shooting mode.
1. Turn the mode dial to select the MySET shooting mode
and press the menu button.
2. Press the Left/Right buttons to select the [LOAD] menu
tap.
3. Press the Up/Down buttons to select a MySET slot
number to load.
4. Press the OK button to set the camera configuration as
saved in the MySET slot.
LOAD
MYSET 1
MYSET 2
MYSET 3
[ MySET mode ]
* The current MySET slot number is displayed in the top left of the LCD.
INFORMATION
Saving is available for the following camera functions.
Functions using the camera buttons - Macro, flash, white balance, ISO, Aperture value
and Shutter speed.
Functions using the menu screen - Size, quality, metering, effect, sharpness and
continuous shot.
53
Scene
Select the [SCENE] submenu to automatically configure
optimal settings, depending on the selected scene.
Only available in the Scene Mode.
2592
SCENE
PORTRAIT
CHILDREN
LANDSCAPE
CLOSE UP
SUNSET
[ SCENE mode ]
Sub menu
Icon
Description
PORTRAIT
To take picture of a person.
CHILDREN
Take a still picture of capturing moving children.
LANDSCAPE
CLOSE UP
SUNSET
DAWN
Scenery with green woods or blue sky.
Close-up shooting for small objects such as plants and
insects.
Splendor of the setting sun.
Daybreak scenes.
BACKLIGHT
Portrait without shadows caused by back light.
FIREWORKS
Firework scenes.
BEACH
&SNOW
For ocean, lake, beach and snowscape scenes.
INFORMATION
When the close-up, sunset, dawn, fireworks are selected, it is possible that camera
shake will occur. If this is the case, use a tripod to eliminate this.
54
Starting play mode
Turn the camera on and select Play mode by pressing the play mode button (
).
The camera can now play back the images stored in the memory.
If you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it again to switch to Recording mode.
You can turn the power on with the play mode button.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
If both the SD memory card and MS DUO are inserted, and all images in the current memory
card are played, images in the other memory card are automatically played.
If only one memory card is inserted, and all images in the memory card are played, the first
image is played again. If both the SD memory card and MS DUO are inserted, press the S
button and you can select a memory card that will be played back.
If you press PLAY button to switch to Play mode, the camera lens will retract into the camera
body for protection of the lens in about 30 seconds.
Playing back a still image
1. Select the PLAY mode by pressing the play
mode button (
).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to play back by
pressing the LEFT / RIGHT button.
Press and hold the LEFT or RIGHT button to
play back the images quickly.
Use the jog dial to fast display only saved
image numbers instead of the actual images in
the LCD. This function is useful for browsing
many images.
Manner mode : Pressing the power button for more than 3 seconds changes the buzzer and
start-up sound setting to OFF, even though you may have set these to ON.
Even if the camera’s power is off, you can start the play mode by pressing the play mode
button.
55
Starting play mode
Playing back a movie clip
Steps from 1-2 are the same as those to play back a still image.
3. Select the recorded movie clip that you want to play
back by using the LEFT/RIGHT button. If you select a
movie clip, the movie clip indicator (
) will be
displayed on the LCD monitor.
4. Press the play & pause button (
) to play back a
movie clip file.
- To pause a movie clip file while playing it back, press
the play & pause button again.
- Pressing the play & pause button again will cause the
movie clip file will restart.
- To rewind the movie clip while it is playing, press the
LEFT button. To fast forward the movie clip, press the
RIGHT button.
- To stop playback of the movie clip, press the play &
pause button, and then press the LEFT or RIGHT
button.
Playing back a recorded voice
Steps from 1-2 are the same as those to play back a still
image.
3. Select the recorded voice that you want to play back by
using the LEFT/RIGHT button. If you select a recorded
voice file, the voice indicator (
) will be displayed on
the LCD monitor.
4. Press the play & pause button (
) to play back a
recorded voice file.
- To pause a recorded voice file, while playing it back,
press the play & pause button again.
- To resume playback of the voice file, press the play & pause button.
- To rewind the voice file while it is playing, press the LEFT button.
To fast forward the voice file, press the RIGHT button.
- To stop playback of the voice file, press the play & pause button, and then press the
LEFT or RIGHT button.
56
LCD monitor indicator
The LCD monitor displays information about the shooting conditions.
No.
Description
Icon
Page
1
Battery
2
Play mode
3
File Type
4
Voice memo
p.59
5
Protect indicator
p.68
6
DPOF indicator
p.71
7
Current memory card
8
Stored image number
p.16
10/10
If you press the LCD button, you can check the following recording information:
SIZE
AV
TV
ISO
FLASH
DATE
:
:
:
:
:
:
2592X1944
F2.7
1/60
75
OFF
2004/05/01
SIZE
AV
TV
ISO
FLASH
DATE
: 2592X1944 Size
: F2.7
Aperture value
: 1/60
Shutter speed
: 75
ISO sensitivity
: OFF
Whether or not the
flash is used.
: 2004/05/01 Recording date
57
Using the camera buttons to adjust the camera
In Play mode, you can use the buttons on the camera to conveniently set up the Play mode
functions.
Thumbnail (
) / Enlargement (
) button
You can view multiple pictures, enlarge a selected picture, and crop and save a selected area
of an image.
Thumbnail display
1. While an image is displayed full screen, press the
thumbnail button.
2. The thumbnail display will highlight the image that had
been showing at the time the thumbnail mode was
selected.
3. Press the 5 function button to move to a desired image.
4. To view an image separately, press the enlargement button (
).
Pressing the thumbnail
button (
)
Pressing the enlargement
button (
)
Highlighted image
[ Normal display mode ]
MOVE:
EXIT:T
[ Thumbnail display mode ]
Image enlargement
1. Select an image that you want to enlarge and press the enlargement button.
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Pressing the thumbnail button will zoom back to the
original full sized image.
- You can tell whether the image displayed is an
enlarged view by checking the image enlargement
indicator shown at the bottom left of the LCD monitor.
(If the image is not an enlarged view, the indicator will
not be displayed.) You can also check the area of
enlargement.
- TIFF, Movie clips and WAV files can’t be enlarged.
- If an image is enlarged, a loss of quality may occur.
58
Thumbnail(
) / Enlargement(
) button
The maximum enlargement rate in proportion to the image size.
Image size
2592
Maximum enlargement rate
9.00
2272
6.45
2048
5.33
1600
1024
5.00
4.00
640
3.33
Trimming : You can extract part of the image that you want
and save it separately.
1. Select an image that you want to enlarge and press the
TRIMMING?
enlargement button.
TRIM : OK
CANCEL :
2. Different parts of the image can be viewed by pressing
the 5 function button.
3. Press the MENU button and a message will be
displayed as shown alongside.
4. Press the OK button to save the trimmed image with a
new file name.
The trimmed image will be displayed on the LCD monitor.
Press the LEFT button to return to the image before it was selected.
- If there is little memory space to save the trimmed image, the image can t be trimmed.
Voice (
) memo / Up button
When the menu is displayed on the LCD monitor, pressing the UP button makes the menu
cursor move up.
When the menu is not displayed on the LCD monitor, the UP button operates as the voice
memo button. You can add your voice to a stored still image.
Adding a Voice Memo to a Still Image
1. Press the LEFT/ RIGHT button to select an image that
you wish to add sound to.
2. Press the voice memo button (
) and the voice
memo indicator will display. The camera is now ready to
record a voice memo.
START:SHUTTER
REC
59
Voice (
) memo / Up button
3. Press the shutter button to start recording and voice will
be recorded to the still image for 10 seconds.
While the voice is recording, the recording status
window will be displayed as shown alongside.
4. The recording can be stopped by pressing the shutter
button again.
STOP.SHUTTER
REC
5. The (
) icon will be displayed on the LCD monitor
after voice memo recording has finished.
- Voice memos can’t be recorded onto movie clip files.
- A distance of 40cm between you and the camera
(microphone) is the best distance to record sound.
- The voice memo will be saved in *.wav format, but has
the same file name as the still image to which it
corresponds.
- If you add a new voice memo to the still image that
already has a voice memo, the existing voice memo will be erased.
Play & Pause (
)/ Down button
In Play mode, the play & pause/ down button works as follows:
- If the menu is displayed
Press the DOWN button to move from the main menu to a sub menu, or to move down the
sub menu cursor.
- If a still image with a voice memo, a voice file, or a movie clip is playing
In Stop mode
: Plays a still image with a voice memo, a voice file, or a movie clip.
During playback : Temporarily stops playback.
In Pause mode : Resumes playback
PLAY
[ Voice recording is stopped ]
60
PAUSE
[ Voice recording is playing ]
PLAY
[ Voice recording is paused ]
LEFT/ RIGHT/ MENU/ OK button
LEFT / RIGHT/ MENU/ OK buttons activate the following.
- LEFT button : While the menu is showing, press the LEFT button to select the menu tab
to the left of the cursor.
- RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab
to the right of the cursor, or to move an secondary menu.
- MENU button : When you press the MENU button, the play mode menu will be displayed
on the LCD monitor. Pressing it again will return the LCD to the initial
display.
- OK button
: When the menu is displayed on the LCD monitor, the OK button is used for
confirming data that is changed by using the 5 function button.
LCD (
) button
The shooting information will be displayed on the LCD monitor.
The last image stored in the memory is displayed on the
LCD monitor by pressing the play mode button.
Pressing the LCD(
) button in the PLAY mode will
change the display as shown below. [Image & Icons]
[Image & Information]
[Image only]
Pressing
the LCD
button
[ Image & Icons ]
SIZE
AV
TV
ISO
FLASH
DATE
: 2592X1944
: F2.7
: 1/60
: 75
: OFF
: 2004/05/01
[ Image & Information ]
Pressing
the LCD
button
[ Image only ]
Pressing the LCD button
If the background image is too bright to view the menus, press the LCD button and the
background image turn to black to view clear menus.
61
Delete(
) button
This deletes images stored on the memory card.
Deleting Images in Play Mode
1. Select an image that you want to delete by pressing the
LEFT / RIGHT button and press the DELETE(
)
button.
2. A message will display as shown alongside on the LCD
monitor.
3. Press the OK button to delete the image.
DELETE?
DEL. : OK
CANCEL :
INFORMATION
Before deleting images from the camera, you should protect or download images to
your computer that you wish to keep.
62
COPY button
This function is used to copy images in a memory card to another memory card.
Copying an image
1. Press the play mode button and use the Left/Right
buttons to select an image to copy.
2. Press the Copy button to display the following message.
3. Press the OK button : The image is copied.
Press the Left button : Cancel the copy operation.
COPY?
COPY : OK
CANCEL :
INFORMATION
If there is not enough space in the memory card to save the image, [CARD FULL!]
message is displayed.
All memory slots need to be loaded for the function.
63
Setting up the play back function using the LCD monitor
PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode,
pressing the MENU button displays the menu on the LCD monitor. The menus you can set
up in Play mode are as follows. To capture an image after setting up the play menu, press
the PLAY button. The items indicated by
are default settings.
Menu tab
Main menu
DELETE
COPY
Sub menu
Secondary menu
SELECT
Page
p. 66
ALL
MS, SD/MMC
SELECT
MS, SD/MMC
ALL
MS, SD/MMC
p. 67
ONE PIC
PROTECT
SELECT
UNLOCK / LOCK
p. 68
ALL PICs
SLIDE
INTERVAL
01 ~ 10SEC
REPEAT
OFF, ON
p. 69
START
RESIZE
2272X1704
1024X768
2048X1536
640X480
1600X1200
LOGO
p. 70
RIGHT(90 )
ROTATE
p. 71
LEFT(90 )
UPDOWN(180 )
SELECT
STANDARD
D
INDEX
ALL PICs
NO
-
p. 72
p. 72
YES
P
O
3X5
4X6
5X7
8X10
SELECT
F
DEFAULT
SIZE
ALL PICs
64
0 ~ 30 PRINTS
3X5
4X6
5X7
8X10
p. 73
Setting up the play back function using the LCD monitor
Menu tab
Main menu
D
P
O
F
CANCEL
Sub menu
Secondary menu
STANDARD
-
INDEX
-
SIZE
-
ONE PIC
-
ALL PICs
-
DEFAULT
-
SELECT
Page
p. 73
p. 75
POSTCARD
PAPER SIZE
4X6, 8X10
A6, A4, B5
FULL
P
C
I
U
C
S
T
PRINTER
SETUP
T
LAYOUT
1, 2, 4, 6, 8
INDEX
PLAIN
PAPER TYPE
PHOTO
p. 76
O
B
M
R
I
I
Z
FASTPHO.
DRAFT
PRINT QUALITY
NORMAL
FINE
D
G
ON
DATE PRINT
E
OFF
ON
FILE NAME
OFF
STANDARD
-
INDEX
-
PRINT
p. 77
-
DPOF PRINT
NO
RESET
YES
p. 78
p. 78
Menus are subject to change without prior notice.
65
Deleting images
Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be
deleted. Remember that this will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place. The startup image is stored in
the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
Deleting images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DELETE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
DELETE
EXIT:OK
SELECT
ALL
MS
[SELECT] : Press the OK button and a window for
selecting the image to be deleted is opened.
1) Up/Down/Left/Right : Select an image
S button : Select an image to delete.
If an image is selected, the image becomes dim.
2) Press the OK button and the selected images will be
deleted.
SELECT:S
[ALL] : Press the right button and menu for selecting
memory card to be deleted will display.
1) Use the Up/Down buttons to select the desired
memory card and press the OK button.
2) The delete confirmation window is opened.
Press the OK button again to delete all unprotected
images. If there is no protected image,
[NO IMAGES!] message is displayed.
4. After deletion, the screen will be changed to the play
mode screen.
66
SET:OK
DELETE?
DEL. : OK
CANCEL :
MOVE:
Copy Pictures
If all memory card slots are full, use this function to copy images in one memory card to
another.
Copy Pictures
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [COPY]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the RIGHT button.
[SELECT] : Menu to select source memory card is
displayed.
1) Use the Up/Down buttons to select a desired memory
card and press the OK button.
2) Selection window for an image to copy is displayed.
- Up/Down/Left/Right : Select an image.
- S Button
: Confirm the selection.
mark is
displayed if an image is selected.
3) Press the OK button to copy the confirmed image to the
other memory card.
[ALL] : Menu to select source memory card is displayed.
1) Use the Up/Down buttons to select a desired memory
card and press the OK button.
2) The copy confirmation window is displayed.
Press the OK button again to copy all images to the
other memory card.
COPY
EXIT:OK
SELECT
ALL
SELECT:S
MOVE:
SD/MMC MS
SD/MMC MS
SET:OK
COPY?
COPY : OK
CANCEL :
INFORMATION
All memory slots need to be loaded for the function.
If the destination is smaller than the source, the remaining files are not copied.
Please delete unneeded files to free up enough memory space before copying.
While copying a picture, the destination file is automatically renamed to the next
sequential filename after the last saved file to avoid filename duplication.
67
Protecting images
This is used to protect specific shots from being accidentally erased (LOCK).
It also unprotects images that have been previously protected (UNLOCK).
Protecting Images
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [PROTECT]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[ONE PIC] : Only an image that is displayed on the LCD
monitor is protected or unprotected.
- UP/DOWN Button : Protect/release the image.
- OK button : Your changes will be saved and the menu
will disappear.
[SELECT] : Selection window for an image to be
protected/released is displayed.
- Up/ Down/ Left/ Right : Select an image
- S Button : Protect/ release the image
- OK button : Your changes will be saved and the
menu will disappear.
[ALL PICs] : Protect/ release all saved images
1) Select [ALL PICs] menu and press the right button.
2) Select a memory card to be protected by pressing the
UP/ DOWN button and press the OK button.
UP/ DOWN Button : Protect/release the images.
OK button : Your changes will be saved and the
menu will disappear.
PROTECT
EXIT:OK
ONE PIC
SELECT
ALL PICs
MS
UNLOCK
CANCLE:
SELECT:S
SET:OK
SET:OK
LOCK
CANCLE:
- If you protect an image, the protect icon will be displayed on
the LCD monitor. (An unprotected image has no indicator)
- An image in LOCK mode will be protected from the delete
function or [DELETE] functions, but will NOT be protected
from the [FORMAT] function.
68
SET:OK
MOVE:
Starting the slide show
Images can be displayed continuously at pre-set intervals. You can view the slide show by
connecting the camera to an external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
Setting play interval: Set the slide show play interval.
1. Use the Up/Down buttons to select the [INTERVAL] menu
and press the Right button.
2. Use the Up/Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
SLIDE
INTERVAL
REPEAT
START
EXIT:OK MOVE:
01 SEC
ON
Repeat setting : Repeat or not the slide show after finishing the first cycle.
1. Use the Up/Down buttons to select the [REPEAT] menu and press the Right button.
2. Use the Up/Down buttons to select the desired sub menu.
[ON] selected : The slide show is repeated until canceled.
[OFF] Selected : The slide show is closed after one cycle.
3. Press the OK button to save the configuration.
Start the slide show: The slide show can start only in the [START] menu.
1. Use the Up/Down buttons to select the [START] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
) again to resume the slide show.
- Press the Menu button to stop the slide show.
INFORMATION
The loading time depends on the image size and quality.
The slide show will start from an image that was displayed on the LCD monitor.
The [PWR OFF] function can’t be activated.
While the slide show is playing, only the first frame of an MOVIE file is displayed.
69
Resize
Change the resolution (size) of pictures taken. Select [LOGO] to save an image to be the
start-up image. The resized image will have a new file name.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [RESIZE]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
RESIZE
EXIT:OK
2272X1704
2048X1536
1600X1200
1024X768
640X480
MOVE:
2272
2048
1600
1024
640
Image Resize Types
Resize
2272X
1704
2048X
1536
1600X
1200
1024X
768
640X
480
LOGO
2592
O
O
O
O
O
O
2272
X
O
O
O
O
O
2048
X
X
O
O
O
O
1600
X
X
X
O
O
O
1024
X
X
X
X
O
O
640
X
X
X
X
X
O
INFORMATION
A large sized image can be resized to a smaller sized image, but not vice versa.
Only still image(JPEG) images can be resized. TIFF, Movie clip(MOV) and Voice
recording(WAV) files can’t be resized.
You can change the resolution of only those files compressed in the JPEG 4:2:2 format.
The resized image will have a new file name. The [LOGO] image is stored not on the
memory card but on the internal memory.
Only one [LOGO] image can be saved. If you save a new [LOGO] image, the existing
startup image will be deleted.
If the memory capacity is insufficient to store the resized image, a [CARD FULL!]
message will display on the LCD monitor and the resized image will not be stored.
70
Rotating an image
You can rotate the stored images by 90, 180, or 270 degrees. You can view a picture in its
proper orientation if the picture has been taken with the camera oriented vertically or up-sidedown. The rotated image can’t be enlarged or trimmed.
1. Press the play mode button and use the Left / Right
buttons to select an image to rotate.
2. Press the menu button and use the Left / Right buttons
to select the [ROTATE] menu tap.
3. Select a desired sub menu by pressing the UP/ DOWN
button.
[RIGHT]
: Rotate picture in a clock-wise direction
[LEFT]
: Rotate picture in a counter-clock-wise direction
[UPDOWN] : Rotate picture 180 degrees
[ Picture after 90 degrees ]
[ Picture after 90 degrees ]
CW rotation
CCW rotation
ROTATE
EXIT:OK
MOVE:
RIGHT(90 )
LEFT(90 )
UPDOWN(180 )
[ Picture after 180 degrees ]
rotation
4. Press the OK button. The rotated image will be displayed and the menu will disappear.
If you display the rotated image on the LCD monitor, empty spaces may appear to the left
and right of the image.
DPOF
DPOF(Digital Print Order Format) allows you to embed printing information on your memory
card’s MISC folder. Select the pictures to be printed and how many prints to make.
The DPOF indicator will display on the LCD monitor when an image that has DPOF
information plays back. Images can then be printed on DPOF printers, or at an increasing
number of photo labs.
This function is not available for Movie clips and Voice recording files.
71
DPOF : STANDARD
This function allows you to embed print quantity information on a stored image.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [STANDARD] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SELECT] : A window for selecting the image to be printed
is opened.
- Up/ Down/ Left/ Right : Select an image
- S button : Confirming an image
- W/T button : Select a number of prints
[ALL PICs] : Set the number of copies to print for each
picture, excluding movie clips and voice
recordings.
- Up/ Down button : Select a number of prints
5. Press the OK button to confirm the setting.
If an image carries DPOF instructions, the DPOF indicator
(
) will show.
DPOF
STANDARD
INDEX
PRINT SIZE
CANCEL
EXIT:OK MOVE:
SELECT
NO
ALL PICs
STANDARD
SELECT:S PRINTS:W/T
SET:OK
DPOF : INDEX
Images (except for movie clips and voice file) are printed as index type.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
DPOF
3. Select the [INDEX] menu by pressing the UP/ DOWN
STANDARD
INDEX
button and press the RIGHT button.
PRINT SIZE
4. Select a desired sub menu by pressing the UP/ DOWN
CANCEL
button.
If [NO] is selected : The image will not be printed in index
format.
If [YES] is selected : The image will be printed in index format.
5. Press the OK button to confirm the setting.
72
BACK:
SET:OK
NO
YES
DPOF : PRINT SIZE
You can specify the print size when printing images stored on the memory card.
The [PRINT SIZE] menu is available only for DPOF 1.1 compatible printers.
Setting the Print Size
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
menu tab.
3. Select the [PRINT SIZE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[SELECT] : A window for selecting the print size is
opened.
Up/ Down/ Left/ Right : Select an image
W/ T button : Select a print size
S button : Selecting an image or cancel the selection
[ALL PICs] : print size of all images are changed.
SIZE : DEFAULT, 3X5, 4X6, 5X7, 8X10
* The [DEFAULT] print size varies depending on the printer
manufacturer.
For your printer's default value, please refer to the user's
guide that came with your printer.
DPOF
BACK:
STANDARD
INDEX
PRINT SIZE
CANCEL
SELECT:S SIZE:W/T
DPOF
SET:OK
SELECT
ALL PICs
BACK:
STANDARD
INDEX
PRINT SIZE
CANCEL
SET:OK
SET:OK
DEFAULT
3X5
4X6
5X7
8X10
DPOF : CANCEL
You can cancel the [STANDARD], [INDEX], or [SIZE] settings. Cancel the setting to reset the
value to its default.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [DPOF]
DPOF
menu tab.
STANDARD
3. Select the [CANCEL] menu by pressing the UP/ DOWN
INDEX
PRINT SIZE
button and press the RIGHT button.
CANCEL
4. Select a desired sub menu by pressing the UP/ DOWN
button.
If [STANDARD] is selected: Cancels the standard print setting.
If [INDEX] is selected
: Cancels the index print setting.
If [SIZE] is selected
: Cancels the print size setting.
5. Press the OK button to confirm the setting.
BACK:
SET:OK
STANDARD
INDEX
PRINT SIZE
73
PictBridge
You can use the USB cable to connect this camera to a printer that supports PictBridge (sold
separately) and print the stored images directly. TIFF, Movie clips and voice files cannot be
printed. You can set up the following settings from the PictBridge menu.
SELECT
: Setting up the scope of PictBridge
PRINTER SETUP
: Setting up printing
PRINT
: Printing pictures
DPOF PRINT
: Printing the DPOF files
RESET
: Initializing the PictBridge functions
Connecting the Camera to a Printer
1. Press the POWER button to turn on the camera.
2. In a mode other than Voice Recording mode, press the
BACK:
SET:OK
SET UP
MENU button.
SOUND
3. Press the LEFT/ RIGHT button and select [SETUP]
LCD
menu tab.
VIDEO
Q.VIEW
COMPUTER
4. Select [USB] menu by pressing the UP/ DOWN button
USB
PRINTER
and press the RIGHT button.
5. Select [PRINTER] menu by pressing the UP/ DOWN
button and press the OK button.
6. Press the menu button twice and the menu will disappear.
7. Use the supplied USB cable to connect the camera to the printer as shown below.
8. Turn on the printer to connect the camera to the printer.
If you selected [Computer] in Step 5, when you connect the camera to your printer, the
[USB I/F COMPUTER] message will display and the connection will not be established.
In this case, disconnect the USB cable, and then follow the procedure from Step 2 and
onward.
74
PictBridge: Picture Selection
You can select the scope of the PictBridge function.
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] before you
PICTBRIDGE
connect the camera to the printer.(See p.74)
SELECT
ONE PIC
2. The [PICTBRIDGE] menu will appear.
PRINTER SETUP
ALL PICs
3. Select the [SELECT] menu by pressing the UP/ DOWN
PRINT
DPOF PRINT
button and press the RIGHT button.
RESET
4. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [ONE PIC] is selected : The PictBridge function will be applied only to the picture
currently displayed.
When [ALL PICs] is selected : The PictBridge function will be applied to all pictures,
excluding TIFF, movie clips and voice files.
Setting the Number of Copies to Print
- Select [ONE PIC] or [ALL PICs].
A screen where you can set the number of copies to print will appear as shown below.
01 PRINTS
MOVE:
COPY:
01 PRINTS
EXIT:SH
MENU:OK
[ When [ONE PIC] is selected ]
MOVE:
COPY:
EXIT:SH
MENU:OK
[ When [ALL PICs] is selected ]
- Use the UP and DOWN buttons to select the number of copies to print and then press the
OK button.
The number of copies you wish to make : 01~30
Unless you press the OK button, the changed number of prints will not be applied.
- When selecting [ONE PIC] in Step 4, you can use the LEFT and RIGHT buttons to move to
the previous or next picture.
- Press the SHUTTER button to return to the PictBridge menu.
75
PictBridge: Print Setting
You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File
Name Print menus for printed pictures.
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] before you
PICTBRIDGE
connect the camera to the printer.(See p.74)
SELECT
2. The [PICTBRIDGE] menu will appear.
PRINTER SETUP
3. Select the [PRINTER SETUP] menu by pressing the UP/
PRINT
DPOF PRINT
DOWN button and press the RIGHT button.
RESET
4. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
If [DEFAULT] is selected
: The print format will be set to the printer's default values.
If [CUSTOM] is selected
: A window from which the user can set up the print
format with the desired values will appear.
CUSTOMIZE
Use the UP and DOWN buttons to select a
PAPER SIZE
LAYOUT
submenu value, and then press the RIGHT button.
PAPER TYPE
Auxiliary menus will appear. Use the UP and
PRINT QUALITY
DOWN buttons to select the desired auxiliary
DATE PRINT
menu, and then press the OK button.
The menus you can set up are as follows:
DEFAULT
CUSTOMIZE
POSTCARD
FULL
PLAIN
DRAFT
OFF
Menu
Function
SIZE
Setting the size of the printing paper
POSTCARD, 4X6, 8X10, A6, A4, B5
LAYOUT
Setting the number of pictures to be
printed on a sheet of paper
FULL, INDEX, 1, 2, 4, 6, 8
PAPER
Setting the quality of the printing paper
PLAIN, PHOTO, FASTPHOTO
QUALITY
DATE
FILENAME
Setting the quality of the picture to
be printed
Sub menu
DRAFT, NORMAL, FINE
Setting whether to print the date
OFF, ON
Setting whether to print the file name
OFF, ON
Depending on the manufacturer and model of your printer, some menus are inaccessible.
Even though these menus will still appear on the LCD monitor, but you will not be able to
select them.
76
PictBridge: Picture Printing
Printing Pictures
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] before you
PICTBRIDGE
connect the camera to the printer.(See p.74)
SELECT
2. The [PICTBRIDGE] menu will appear.
PRINTER SETUP
3. Select the [PRINT] menu by pressing the UP/ DOWN
PRINT
DPOF PRINT
button and press the RIGHT button.
RESET
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[STANDARD] : Print a selected image according to the
number of copies required.
[INDEX]
: Print all images displayed in the Index
format.
CANCEL:SH1
5. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the
[NO IMAGE!] message will be displayed. If you press
the SHUTTER button during printing, printing will be
cancel and the menu from Step 2 will appear.
6. If an error occurs during printing, the screen shown below will appear.
WARNING
OK: RESUME
[ Fatal error ]
Press the OK button to cancel printing.
Follow the Steps 1 to 4 again to print the
picture(s).
STANDARD
INDEX
WARNING
OK: RESUME
LEFT: CANCEL
[ Recoverable error ]
Press the OK button to resume printing,
or press the LEFT button to cancel
printing.
INFORMATION
When printing pictures by connecting the camera to the printer, use the AC adapter.
If the printer is turned off during printing, the printing will stop and the paper will be
dispelled.
If there are continuous print error, please check the print condition.
77
PictBridge : DPOF AUTO PRINT
This allows you to directly print the files with DPOF information.
For instructions on how to set up DPOF, refer to pages 72 to 73.
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] before you
connect the camera to the printer.(See p.74)
2. The [PICTBRIDGE] menu will appear.
3. Select the [DPOF PRINT] menu using the UP/DOWN
button and press the RIGHT button. Next, select [YES]
using the Up/Down button, and then press the OK
button.
4. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the
[NO IMAGE!] message will be displayed. If you press
the SHUTTER button during printing, printing will be
cancel and the menu from Step 2 will appear.
5. If an error occurs during printing, the error message
number 6 on page 77 will be displayed.
For details, please refer to page 77.
PICTBRIDGE
SELECT
PRINTER SETUP
PRINT
DPOF PRINT
RESET
YES
NO
STOP.SHUTTER
PictBridge : RESET
This allows you to restore the values of the PictBridge menu, which was changed in
CUSTOMIZE, to their default values.
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] before you
PICTBRIDGE
connect the camera to the printer.(See p.74)
SELECT
YES
2. The [PICTBRIDGE] menu will appear.
PRINTER SETUP
NO
3. Select the [RESET] menu by pressing the UP/ DOWN
PRINT
DPOF PRINT
button and press the RIGHT button.
RESET
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [NO] is selected : Settings will not be reset.
- If [YES] is selected : All print and image settings will be reset.
Default print setting varies depending on the printer manufacturer.
For your printer s default setting, refer to the user s guide that came with your printer.
78
Setup menu
In this mode, you can set up basic settings. You can use the setup menu in all camera
modes, except Voice Recording mode.
The items indicated by
are default settings.
Menu tab
Main menu
Sub menu
Secondary menu
RESET
FILE
p.80
SERIES
PWR SAVE
LANGUAGE
FORMAT
Page
OFF, 01 ~ 03 ~ 10MIN
p.81
ENGLISH
ENGLISH
FRENCH
KOREAN
A
GERMAN
B
S.CHINESE
T
Y
P
E
SPANISH
T
Y
P
E
T.CHINESE
ITALIAN
RUSSIAN
DANISH
p.82
SWEDISH
DUTCH
THAI
PORTUGUESE
MALAYSIAN
MS
SD/MMC
p.82
04/05/01 13:00
DATE. TIME
YY/MM/DD
p.83
MM/DD/YY
DD/MM/YY
OFF
IMPRINT
DATE
p.83
DATE & TIME
LAMP
OFF
ON
p.84
OFF
SOUND
LOW
p.85
MEDIUM
HIGH
79
Setup menu
Menu tab
Main menu
Sub menu
Secondary menu
Page
DARK
LCD
NORMAL
p.85
BRIGHT
NTSC
VIDEO
p.86
PAL
OFF
Q.VIEW
p.87
1 ~ 5 SEC
COMPUTER
USB
PRINTER
p.87
NO
RESET
p.88
YES
CARD SELECT
SD/MMC
p.88
MS
File name
This function allows the user to select the file naming format.
Assigning File Names
1. In any mode other than Voice Recording mode, press the
MENU button.
2592
2. Press the LEFT/ RIGHT button and select the [SETUP]
SET UP
BACK:
SET:OK
RESET
menu tab.
FILE
SERIES
PWR SAVE
3. Select the [FILE] menu by pressing the UP/ DOWN button
LANGUAGE
and press the RIGHT button.
FORMAT
DATE.TIME
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[RESET] : After using the reset function, the next file name will be set from 0001 even
after formatting, deleting all or inserting a new memory card.
[SERIES] : Under this system, the file name will directly follow the last stored file name,
regardless of any actions such as file deletion or formatting.
80
File name
INFORMATION
The first stored folder name is 100SSCAM, and the first file name is SA500001.
Whenever you store an image, the file number is increased by 1.
The file numbers are named from SA500001 to SA509999 automatically, 9999 files will
be stored in a folder.
The folder number is assigned sequentially from 100 to 999 as follows: 100SSCAM
101SSCAM ~
999SSCAM.
The files used with the memory card conform to the DCF(Design rule for Camera File
systems) format.
Auto power off
This function switches the camera off after a set amount of time in order to prevent
unnecessary battery drainage.
Setting Power Off
1. In any mode other than Voice Recording mode, press the
MENU button.
2592
SET UP
BACK:
SET:OK
2. Press the LEFT/ RIGHT button and select the [SETUP]
FILE
menu tab.
PWR SAVE
OFF
3. Select the [PWR SAVE] menu by pressing the UP/
LANGUAGE
FORMAT
DOWN button and press the RIGHT button.
DATE.TIME
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
Selecting [OFF]
: The power off function will not operate.
Selecting [1~10MIN] : The power will turn off automatically if not used for the period of time
specified.
INFORMATION
Even if the batteries or AC adapter are removed and inserted again, the power off
setting will be preserved.
Note that the automatic power off function will not operate if the camera is in PC mode,
slide show, playing back a voice recording or movie clip.
81
Language
There is a choice of languages that can be displayed on the LCD monitor.
Even if the batteries or AC adapter are removed and inserted again, the language setting will
be preserved.
Setting Language
1. In any mode other than Voice Recording mode, press
the MENU button.
2592
SET UP
BACK:
SET:OK
2. Press the LEFT/ RIGHT button and select the [SETUP]
ENGLISH
FILE
menu tab.
PWR SAVE
3. Select the [LANGUAGE] menu by pressing the UP/
LANGUAGE
FORMAT
DOWN button and press the RIGHT button.
DANSK
DATE.TIME
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
LANGUAGE sub menu
- Type A : English, French, German, Spanish, Italian, Russian, Dutch and Portuguese.
- Type B : English, Korean, Simplified Chinese, Traditional Chinese, Danish, Swedish,
Thai, and Malaysian.
Formatting a memory card
This is used for formatting the memory card. If you run [FORMAT] on the memory card, all
images, including the protected images, will be deleted. Be sure to download important
images to your PC before formatting the memory card.
Formatting a Memory Card
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [FORMAT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Press the Up/Down button to select desired sub menu.
5. Press the OK button. The [PLEASE WAIT!] message is
displayed while the memory card is being formatted.
2592
SET UP
FILE
PWR SAVE
LANGUAGE
FORMAT
DATE.TIME
BACK:
SET:OK
MS
SD/MMC
Be sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can t recognize or one that has been taken from
another camera.
Always format the memory card using this camera. If you insert a memory card that has been
formatted using other cameras, memory card readers, or PCs, you will get a [CARD ERROR!]
message.
82
Setting up the Date/ Time/ Date type
You can change the date and time that will be displayed on the captured images and set up
the date type.
Setting Date/Time & Selecting Date type
1. In any mode other than Voice Recording mode, press
the MENU button.
2592
SET UP
BACK:
SET:OK
2. Press the LEFT/ RIGHT button and select the [SETUP]
FILE
menu tab.
04/
05/
01
PWR SAVE
3. Select the [DATE. TIME] menu by pressing the UP/
00:00
LANGUAGE
FORMAT
DOWN button and press the RIGHT button.
YY/MM/DD
DATE.TIME
4. Use the UP, DOWN, LEFT, and RIGHT buttons to
select the desired submenu value, and then press the
OK button.
RIGHT button : Selects the year/month/day/hour/minute/date type.
LEFT button : Moves the cursor to the [DATE. TIME] main menu if the cursor is at the
first item of the date and time setup. In all other cases, the cursor will be
shifted to the left of its current position.
UP and DOWN buttons: Changes the setting value.
- Date type
[YY/MM/DD] : year/ month/ day
[MM/DD/YY] : month/ day/ year
[DD/MM/YY] : day/ month/ year
Imprinting the recording date
There is an option to include DATE/TIME on still images.
Date Imprinting
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
SET UP
PWR SAVE
menu tab.
LANGUAGE
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
FORMAT
button and press the RIGHT button.
DATE.TIME
IMPRINT
4. Use the UP and DOWN buttons to select the desired
date imprint type, and then press the OK button.
[OFF]
: The DATE & TIME will not be imprinted on the image file.
[DATE]
: Only the DATE will be imprinted on the image file.
[DATE&TIME] : The DATE & TIME will be imprinted on the image file.
2592
BACK:
SET:OK
OFF
DATE
DATE & TIME
83
Imprinting the recording date
INFORMATION
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute: Second] and hours are shown
using the 24 hour clock.
The imprint function is applied only to still images.
Function lamp
You can turn on and off the function lamp located on the front of the camera.
Setting the function lamp
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LAMP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [OFF] is selected : The function lamp will not light up.
If [ON] is selected : The function lamp will light up.
2592
SET UP
LANGUAGE
FORMAT
DATE.TIME
IMPRINT
LAMP
BACK:
SET:OK
OFF
ON
Description of the Function lamp
Function
Description
Power on
Blue light blinks and then turns off when the camera is ready to take a picture.
After taking a picture
Blue lamp blinks once.
While movie recording
Blue lamp blinks at a 1-second interval.
While voice recording
Blue lamp blinks at a 1-second interval.
After selecting the remote controller mode
Blue lamp blinks at a 1-second interval.
While the self timer is
functioning
* The lamp will function while using the self-timer even if the
configuration is set to off the lamp. (See p. 37)
84
Sound
If you set the operation sound to ON, various sounds will be activated for camera startup,
when button are pressed, and if there is a card error, so that you can be aware of the camera
operation status.
Setting Operation Sounds
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [SOUND] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [SOUND] sub menu : OFF/ LOW/MEDIUM/ HIGH
2592
SET UP
BACK:
FORMAT
DATE.TIME
IMPRINT
LAMP
SOUND
SET:OK
OFF
LOW
MEDIUM
HIGH
LCD brightness
You can adjust the LCD brightness.
Adjusting LCD Brightness
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [LCD] menu by pressing the UP/ DOWN button
and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [LCD] sub menu : DARK, NORMAL, BRIGHT
2592
SET UP
DATE.TIME
IMPRINT
LAMP
SOUND
LCD
BACK:
SET:OK
DARK
NORMAL
BRIGHT
85
Selecting Video out type
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the
camera is connected. PAL mode can support only BDGHI.
Setting the Video Out Type
1. In any mode other than Voice Recording mode, press the
MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [VIDEO] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- [VIDEO] sub menu : NTSC, PAL
2592
SET UP
BACK:
IMPRINT
LAMP
SOUND
LCD
VIDEO
SET:OK
NTSC
PAL
Connecting to an external monitor
In RECORDING/ PLAY mode, you can
view the stored still images or movie clips
by connecting the camera to an external
monitor via the A/V cable. When the
camera is connected to an external
monitor, the LCD monitor will be turned off
automatically.
Yellow color-Video
White color-Voice
INFORMATION
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,
Thailand, Norway.
When using a TV as an external monitor, you will need to select the external or AV
channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
When using a PAL type monitor, there will be a black frame on the lower part of the
monitor.
When the camera is connected to an external monitor, the menu will be visible on the
external monitor and the menu functions are the same as those indicated on the LCD
monitor.
86
Quick view
If you enable Quick View before capturing an image, you can view the image you just
captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is
possible only with still images.
Setting Quick View
1. In any mode other than Voice Recording mode, press the
MENU button.
SET UP
BACK:
2. Press the LEFT/ RIGHT button and select the [SETUP]
LAMP
menu tab.
SOUND
LCD
3. Select the [Q.VIEW] menu by pressing the UP/ DOWN
VIDEO
button and press the RIGHT button.
Q.VIEW
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[OFF]
: The quick view function can’t be activated.
[1 ~ 5 SEC] : The captured image is briefly displayed during the selected time.
2592
SET:OK
1 SEC
Connecting an External Device (USB)
You can select an external device to which you want to connect the camera using the USB
cable.
Selecting an External Device
1. In any mode other than Voice Recording mode, press the
MENU button.
2592
SET UP
BACK:
SET:OK
2. Press the LEFT/ RIGHT button and select the [SETUP]
SOUND
menu tab.
LCD
3. Select the [USB] menu by pressing the UP/ DOWN button
VIDEO
Q.VIEW
COMPUTER
and press the RIGHT button.
PRINTER
USB
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[COMPUTER] : Select this if you want to connect the camera to your PC. Refer to page
109 for instructions on how to connect the camera to your PC.
[PRINTER]
: Select this if you want to connect the camera to your printer. Refer to
page 74 for instructions on how to connect the camera to your printer.
87
Initialization(RESET ALL)
All camera menu and function settings will be restored to their default values. However,
values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.
Initializing the Camera
1. In any mode other than Voice Recording mode, press the
MENU button.
SET UP
2. Press the LEFT/ RIGHT button and select the [SETUP]
LCD
menu tab.
VIDEO
3. Select the [RESET] menu by pressing the UP/ DOWN
Q.VIEW
USB
button and press the RIGHT button.
RESET
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : Settings will not be restored to their defaults.
If [YES] is selected : All settings will be restored to their defaults.
2592
BACK:
SET:OK
NO
YES
Select card
The camera has multi memory slots for an SD Memory Card (Multi Media Card) and Memory
Stick Duo. Select a memory card to use when both memory slots are loaded with a memory
card.
Memory card selection
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2592
SET UP
2. Press the LEFT/ RIGHT button and select the [SETUP]
BACK:
SET:OK
VIDEO
menu tab.
Q.VIEW
3. Select the [CARD SELECT] menu by pressing the UP/
USB
RESET
MS
DOWN button and press the RIGHT button.
CARD SELECT
SD/MMC
4. Use the UP and DOWN buttons to select the desired sub
menu, and then press the OK button.
[MS]
: Selects Memory Stick DUO
[SD/MMC] : Selects SD card or Multi Media Card
* If all the slots are full, make sure that the card you want is selected before taking a picture.
* Configure the submenu of the [CARD SELECT] menu to use the free space in the auxiliary
memory card when a [CARD FULL !] message is displayed.
88
Setting up the MYCAM menu
You can set up a start up image, start up sound and shutter sound. Every camera working
mode (with the exception of Voice recording mode) has the MyCAM menu.
The items indicated by
are default settings.
Menu tab
Main menu
Page
Sub menu
OFF
IMAGE 1
IMAGE 2
IMAGE 3
OFF
SOUND 1
SOUND 2
SOUND 3
OFF
SH.SOUND 1
SH.SOUND 2
SH.SOUND 3
p.89
START IMAGE
START SOUND
p.90
p.90
SH.SOUND
* Menus are subject to change without prior notice.
Start up image
You can select the image that is first displayed on the LCD monitor whenever the camera is
turned on.
Setting a Startup Image
1. In any mode with the exception of Voice Recording
mode, press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [START IMAGE] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
2592
MYCAM
BACK:
SET:OK
START IMAGE
START SOUND
SH.SOUND
INFORMATION
Use a saved image for the start-up image with the [LOGO] in the [RESIZE] menu in the
play mode.
The start-up image will not be deleted by deleting all images or [FORMAT] menu.
89
Start up sound
You can select the sound that is activated whenever the camera is turned on.
Setting the Startup Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [START SOUND] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
2592
MYCAM
BACK:
SET:OK
OFF
SOUND 1
SOUND 2
SOUND 3
START IMAGE
START SOUND
SH.SOUND
Shutter sound
You can select the shutter sound.
Selecting the Shutter Sound
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [MYCAM]
menu tab.
3. Select the [SH.SOUND] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
90
2592
MYCAM
START IMAGE
START SOUND
SH.SOUND
BACK:
SET:OK
OFF
SH.SOUND 1
SH.SOUND 2
SH.SOUND 3
Important notes
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not use or store this unit in the
following locations.
- Areas exposed to severe changes in temperature and humidity.
- Areas exposed to dust and dirt.
- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
- Environments where there is high magnetism or excessive vibration.
- Areas with high explosives or highly flammable materials.
Do not let the unit come into contact with dust, vinyl goods, or chemicals, such as
insecticides, for an extended period of time.
Sand can be particularly troublesome to cameras.
- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas
where there is lots of sand.
- Doing so may result in failure or may permanently render the unit unusable.
Extremes in temperature may cause problems.
- If the camera is transferred from a cold to a warm and humid environment, condensation
can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at
least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory
card. If this happens, turn off the camera and remove the memory card. Wait until the
moisture has dispersed.
Caution on Using the Lens
- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of
the image sensor.
- Pay attention not to get fingerprints or foreign substances on the surface of the lens.
If the digital camera is not used for a long period, an electric discharge can occur.
It is a good idea to remove the batteries and the memory card if you do not intend using the
camera for an extended period of time.
91
Important notes
If the camera is exposed to an electronic interference, it will turn itself off to protect the
memory card.
Camera Maintenance
- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.
If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
Clean the camera body with a soft cloth. Do not allow this camera to come into contact with
solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell
of the camera and also affect its performance. Rough handling can damage the LCD
monitor. Take care to avoid damage and keep the camera in its protective carry case at all
times when not in use.
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to
the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected by static
electricity. In this case, disconnect and re-connect the USB cable before trying the transfer
again.
92
Warning indicator
There are several warnings that may appear on the LCD display
Warning indicator
Causes
- Memory card error
- Turn off the camera power and turn it
on again
- Insert the memory card again
- Format the memory card (p.82)
- There is insufficient
memory capacity to take
an image
- Insert a new memory card
CARD ERROR !
CARD FULL !
Remedy
- Delete unnecessary image files to
free up some memory
NO IMAGE !
NO CARD !
- There are no images stored
on the memory card
- Take images
- Insert a memory card that is holding
some images
- A memory card is not inserted
- The camera can t
recognize the memory card
- Insert a memory card
- Insert the memory card again
- Turn off the camera power and turn it
on again
FILE ERROR !
- File error
- Memory card error
- Format the memory card
- Contact a camera service center
LOW BATTERY !
- There is low battery
capacity
- Insert fresh batteries
- The memory card is
locked
- MS DUO : Slide the write protect switch to
the bottom of the memory card
- SD : Slide the write protect switch to the
top of the memory card
- When taking pictures in
dark places
- Use a tripod and take pictures in
Flash Photography mode
CARD LOCKED !
LOW LIGHT !
93
Before contacting a service center
Please check the following
Symptom
Causes
- Insert fresh batteries
The camera
doesn t switch on
- There is low battery
capacity
- An AC Power Adapter is
not connected
- Batteries are inserted
incorrectly with the
reverse polarities
The camera
power ceases
whilst in use
- The batteries are exhausted
- The Camera is turned off
automatically
- The Adapter plug is not
connected securely
- Insert fresh batteries
- Press the power button to reactivate
camera
- Remove and re-insert the plug
- The Camera is being
used in low temperatures
- Keep the camera in warm conditions
(i.e. inside a coat or jacket) and only
remove it in order to take images
- After turning the camera off, insert a
new memory card
- Delete unnecessary image files
Camera does
not take images
when pressing
the Shutter
button
- The memory card is not
inserted
- There is insufficient
memory capacity
- The memory card has
not been formatted
- The memory card is
exhausted
- The camera’s power is off
- The batteries are exhausted
- The memory card is
locked
- Batteries are inserted
incorrectly with the
reverse polarities
The camera
suddenly stops
working while in
use
- The camera was stopped
due to a malfunction
- Remove /re-insert batteries and switch
the camera on
Batteries drain
quickly
94
Remedy
- Connect an AC Power Adapter
- Insert the batteries according to the
polarity marks (+, -)
- Format the memory card (p.82)
- Insert a new memory card
- Turn the camera power on
- Insert fresh batteries
- Refer to [CARD LOCKED!] error
message (p.93)
- Insert the batteries according to the
polarity marks (+, -)
Before contacting a service center
Symptom
Causes
- If the subject is closer than 0.8m,
select macro shot mode
The images are
unclear
- A picture was taken
within 0.8 m from the
subject without setting an
appropriate macro mode
- Taking a picture beyond
the flash range
- The lens is smudged or
dirty
The flash does
not fire
- Flash off mode has been
selected
- Dis-engage flash off mode
Incorrect date
and time is
displayed
- The date and time have
been set incorrectly or
the camera has adopted
the default settings
- Reset the date and time correctly
- Camera malfunction
- Remove /re-insert batteries and switch
the camera on
A card error has
occurred while
the memory
card is in the
camera.
- Incorrect memory card
format
- Re-format the memory card (p.82)
The images
don't play back
- Incorrect file name
(Violation of DCF format)
- Do not change the image file name
The camera
buttons do not
operate
Remedy
- Take a picture within the flash range
- Clean the lens
95
Before contacting a service center
Symptom
Causes
Colour of image
is different to
the original
scene
- White balance setting is
incorrect
- Select appropriate White balance
Images are too
bright
- Exposure is excessive
- Reset exposure compensation
- Check the connection cables
No image on
external monitor
- The external monitor has
not been connected
properly with the camera
- There are incorrect files
in the memory card
- Check the connection
When using the
PC’s explorer,
the [Removable
Disk] file does
not show
- Cable connection is
incorrect
- The camera is off
- There are no batteries,
the batteries are
exhausted or the AC
adapter is not connected.
- The operating system is
not Windows 98, 98SE,
2000, ME, XP/ Mac OS
9.0 ~ 10.2. Alternatively
the PC does not support
USB
- The camera driver is not
installed
96
Remedy
- Insert a memory card that has correct
files
- Turn the camera on
- Insert new batteries or check the
adapter connection
- Install Windows 98, 98SE, 2000, ME,
XP/ Mac OS 9.0 ~ 10.2 to PC that
supports USB
- Install a [USB Storage Driver]
Specifications
Type
Image Sensor Effective Pixel
Total Pixel
Focal Length
Lens
F No.
Digital Zoom
Viewfinder
Focusing
Shutter
Optical Viewfinder
LCD Monitor
Type
Range
Type
Speed
Control
Exposure
Flash
Compensation
ISO Equivalent
Modes
Range
Recharging Time
Sharpness
Effect
White Balance
Voice Recording
Date Imprinting
Still Image
Shooting
Movie Clip
Storage
Media
1/1.8" CCD
Approx. 5.0 Mega-pixel
Approx. 5.3 Mega-pixel
Schneider Lens f = 7.7 ~ 23.1mm
(35mm film equivalent : 38~114mm)
F2.7 ~ F4.9
Still Image mode : 1.0X ~ 5.0X
Play mode : 1.0X ~ 9.0X (depends on image size)
Real image optical viewfinder
2.0" color TFT LCD(117,600 dots, Rotating LCD)
TTL auto focus, Manual focus
Normal : 80cm ~ infinity
Macro : 4 ~ 80cm (Wide), 30 ~ 80cm (Tele)
Mechanical and Electronic shutter
2 ~ 1/2,000 sec. (Manual, Night Scene Mode : 15 ~ 1/2,000 sec.)
Program AE, Shutter Priority AE, Aperture Priority AE or Manual Exposure
Metering : Multi, Spot
2EV (0.5EV steps)
Auto, 50, 100, 200, 400
Auto, Auto & Red-eye reduction, Slow sync., Fill-in flash, Flash off
Wide : 0.3 ~ 3.0m, Tele : 0.3 ~ 2.0m
Approx. 6 sec.
Soft, Normal, Vivid
Normal, B&W, Sepia, NEGATIVE ,RGB
Auto, Daylight, Cloudy, Fluorescent_L, Fluorescent_H, Tungsten, Custom
Voice Recording (max. 1 hour)
Voice Memo in Still Image (max. 10 sec.)
Date &Time, Date, Off (user selectable)
Modes : Auto, Program, Myset, A/S/M, Voice, Night Scene, Scene
* Scene : Portrait, Children, Landscape, Close-up, Sunset, Dawn,
Backlight, Fireworks, Beach & Snow
Continuous : Single, Continuous, AEB
Self-timer : 2 sec., 10 sec., Remote control (optional)
With Audio (recording time : memory capacity dependent)
Size : 640x480, 320x240
Frame rate : 30 fps, 15 fps
Multi Memory Card Slot (SD/MMC, Memory Stick Duo/ Pro Duo compatible)
- SD : up to 512MB guaranteed
- Memory Stick Duo/ Pro Duo : up to 512MB guaranteed
97
Specifications
File Format
Image Size
Storage
Capacity
(32MB)
Image Play
Type
Editing
Interface
Power Source
Dimensions (WxHxD)
Weight
Operating Temperature
Operating Humidity
Camera Driver
Software
Application
Special Features
Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0
Movie Clip : MOV (MPEG-4)
Audio : WAV (G.711)
2592 : 2592x1944 pixels, 2272 : 2272x1704 pixels,
2048 : 2048x1536 pixels, 1600 : 1600x1200 pixels,
1024 : 1024x768 pixels, 640 : 640x480 pixels
2592 : TIFF 1, S.Fine 11, Fine 23, Normal 35
2272 : TIFF 2, S.Fine 15, Fine 30, Normal 45
2048 : TIFF 3, S.Fine 18, Fine 36, Normal 53
1600 : TIFF 5, S.Fine 30, Fine 61, Normal 91
1024 : TIFF 12, S.Fine 70, Fine 130, Normal 183
640 : TIFF 29, S.Fine 183, Fine 305, Normal 457
* These figures are measured under Samsung’s standard conditions
and may vary depending on shooting conditions and camera settings.
Single image, Thumbnails, Slide show, Movie clip
Trimming, Resizing
Digital output connector : USB 2.0
Audio : Mono
Video output : NTSC, PAL (user selectable)
DC power input connector : 5.0V
Primary battery : 2xAA alkaline(High capacity), Lithium, Ni-Mn(High capacity),
Ni-Zn(High capacity) / 1xCR-V3
Rechargeable battery : 3.7V Li-ion (SLB-1437), 2xAA Ni-MH(Over 2300mAh),
Ni-Cd(Over 1100mAh) / 1xI-Pack (SBP-1303)
AC Adapter : SAC-51
* Included power source may vary depending on sales region.
106.5 x 57 x 38.5 mm
190g (without batteries and card)
0 ~ 40
5 ~ 85 %
Storage Driver (Windows98/98SE/2000/ME/XP, Mac OS 9.0 ~ 10.2)
Digimax Viewer, QuickTime Player, ArcSoft PhotoImpression
MPEG-4 VGA 30fps Movie Clip, 2.0" Rotating LCD monitor
A World Unique 9 Different Power Source
A World Superior Schneider Lens
Multi Memory Card Slot (SD/MMC, Memory Stick Duo/ Pro Duo compatible)
Superb 4cm Macro
* Specifications are subject to change without prior notice.
* All trademarks are the property of their respective owners.
98
Software Notes
Please ensure that you read the instruction manual carefully before use.
The attached software is a camera driver and image editing software tool for Windows.
Under no circumstances should all or part of either the software or the user manual be
reproduced.
Copyrights for software are licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
We cannot, however, be held responsible in any way for damage caused by inappropriate
use.
Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is
not covered by the Samsung warranty.
Before reading this manual, you should have a basic knowledge of computers and O/S
(Operating Systems).
System Requirements
For Windows
PC with processor better than MMX
For Macintosh
Power Mac G3 or later
Pentium 233MHz (XP : Pentium II 300MHz)
Windows 98/98SE/2000/ME/XP
Mac OS 9.0 ~ 10.2
Minimum 32MB RAM (XP : 128MB)
Minimum 64MB RAM
140MB of available hard-disk space
110MB of available hard-disk space
USB port
USB port
CD-ROM drive
CD-ROM drive
800x600 pixels, 16-bit colour display
QuickTime 6.0 or later for Movie Clip
compatible monitor (24-bit color display
recommended)
99
About the software
After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
Before connecting the camera to the
PC, you should first install the camera
driver.
Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the Application CD.
But you can use the camera with Mac OS 9.0 ~ 10.2.
QuickTime Player : The program for playing back QuickTime movies (.mov). It can also play
video files compressed with MPEG4 codec.
Digimax Viewer : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor. You can also copy,
move or delete the images and enlarge/downscale the image sizes with Digimax Viewer.
This software is only compatible with Windows.
PhotoImpression : Image editing program.
You can edit or store still images that you download from the camera. This software is only
compatible with Windows.
INFORMATION
Be sure to check the system requirements (page 99) before installing the driver.
You should allow 5~10 seconds for running the automatic setup program according to
the capability of the computer. If the frame does not show, run the [Windows Explorer]
and select [Samsung.exe] in the CD-ROM Drive root directory.
100
Setting up the application software
To use this camera with a PC, install the application software first.
After this has been done, the stored images in the camera can be moved to the PC and can be
edited by an image editing program.
INFORMATION
Close other programs before installing the application software.
Before installing the application software, disconnect the USB connection.
You can visit the Samsung web-site through the internet.
http://www.samsungcamera.com : English
http://www.samsungcamera.co.kr : Korean
1. Click the [Install] menu in the Autorun frame.
The camera driver is installed automatically.
[Click !]
2. Installation is complete.
Click the [Finish] button.
[Click !]
3. Click [Next >] to begin installing QuickTime.
[Click !]
4. A Welcome window will appear.
Click [Next >] to proceed to the next screen.
[Click !]
101
Setting up the application software
5. The Software License Agreement window will open, asking
you to agree to the licensing. Use the button on the bottom
left to select the language of your choice, and then click
[Agree] to accept the license agreement. The installation
will proceed to the next stage. If you do not agree to the
license agreement, click [Disagree]. The installation will be
canceled. If the language of your choice is not listed, please
select [English].
6. A window will open, asking you to select a destination
folder where the files will be copied to. Click [Next >]. To
copy the files to another folder, click [Browse..] Browse to a
folder you want to copy the files to.
[Click !]
7. The Choose Installation Type window will open.
Click [Next >].
[Minimum]
: Installs required files only.
[Recommended] : Installs required files and the most
commonly used optional files.
[Custom]
: Allows you to install only the
components you choose.
[Click !]
8. A window will open, asking you to choose a folder to which
program icons will be added. Click [Next >]. If you want to
add the program icons to a different folder, choose another
folder, and then click [Next >].
[Click !]
9. The Enter Registration window appears.
Enter your name and organization in the respective fields,
and then click [Next >].
You do not have to enter a registration number.
[Click !]
102
Setting up the application software
The QuickTime program folder will appear. 10. The QuickTime Settings - Introduction
window appears. Click [Next >].
Click on the Close button to close the folder.
[Click !]
[Click !]
11. Set the transfer rate for downloading
content from the Internet, and then click
[Next >].
12. Set up your browser for QuickTime plug-in.
Click [Next >].
[Click !]
13. Specify the file types you want to
associate with QuickTime. Click [Finish].
[Click !]
14. Installation is complete. Click [Close].
[Click !]
[Click !]
103
Setting up the application software
* The QuickTime Player will launch, the readme file will open, and the Step 15 window will open.
Click on the Close 1 and Close 2 buttons to exit the program.
[Close 1
button]
15. A window where you can choose the program you want
to install will appear. Click [Install]. For information on
application software, please refer to page 100.
[Click !]
If you select [Cancel] , the application program installation will be cancelled.
16. The [Digimax Viewer 2.1] installation window will be
displayed as shown alongside. Click the [Next] button.
[Click !]
INFORMATION
If you select [Cancel] at step 16, a window for installing PhotoImpression will be
displayed.
17. The Software License Agreement window will be
displayed. If you agree to this, click [Yes], the window will
then move to the next step. If you disagree, click [ No ]
and the installation program will be canceled.
[Click !]
104
[Close 2
button]
Setting up the application software
18. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse..] and choose a folder
you want.
[Click!]
19. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button.
If you want to add the program icons to a
different folder, choose another folder, and
then click [Next >] button.
[Click!]
20. Digimax Viewer installation is successfully
completed. Click the [Finish] button to install
PhotoImpression.The system will not reboot
even the [Yes, I want to restart the computer
now] option is selected.
*The frame 20 may not appear according
to the system requirements.
[Click!]
21. Digimax Viewer Installation is completed.
The PhotoImpression installation window will
be displayed as shown alongside.
Click the [OK] button.
[Click!]
INFORMATION
If you click [Cancel] in Step 21, the PhotoImpression installation will be canceled and the
Restart Computer window will appear.
22. A Welcome window will be displayed.
Click the [Next >] button.
[Click!]
105
Setting up the application software
23. The Software License Agreement window
will be displayed. If you agree to this, click
[Yes], the window will then move to the next
step. If you disagree, click [No] and the
installation program will be canceled.
[Click!]
24. A destination selection window will open.
Click [Next >]. To copy to the files to another
folder, click [Browse...] and choose a folder
you want.
[Click!]
25. The [Select Components] window will
appear. Click [Next >] button.
[Click!]
26. A window will open, asking you to choose a
folder to which program icons will be added.
Click [Next >] button.
If you want to add the program icons to a
different folder, choose another folder, and
then click [Next >] button.
[Click!]
106
Setting up the application software
27. Installation is complete. To apply changes,
you must restart the computer.
Select [Yes, I want to restart my computer
now], and then click [Finish].
[Click!]
28. After restarting the computer, connect the PC to the camera with the USB cable.
29. Turn the camera power on.
[Found New Hardware Wizard] will open and
the computer will recognize the camera.
If you have ever installed an image viewer
program or your OS is Windows XP, an
image viewer program will open.
If the image viewer program opens, the
camera driver was setup successfully.
30. If you can see [Removable Disk] under
[My computer], the camera driver installation
was successful.
Now you can transfer image files from the
camera to PC via the USB cable.
107
Setting up the application software
INFORMATION
If you have installed the camera driver, [Found New Hardware Wizard] may not open.
On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens
and a window asking you to select a driver file may appear. In this case, specify "USB
Driver" in the CD supplied. (for Windows 98 and 98 SE).
When connecting the camera to your PC, it is recommended that you use an AC power
adapter.
Before connecting the camera to the PC, You should first install the camera driver.
After installing the camera driver, you have to restart your PC.
If you connect the camera to the PC before installing the camera driver, the [Found New
Hardware Wizard] will open.
In this case, cancel the [Found New Hardware Wizard] and disconnect the camera.
Install the camera driver and connect the camera to the PC again.
Should the computer not find the camera driver after installation, please try one or more
of the following measures.
1. Delete the camera driver (p.112), and re-install the driver.
2. Refer to FAQ (p.119) to check for a possible solution to the problem.
3. If your PC’s central processing unit is VIA chip (This is shown in the USB Host
Controller), download the patch file from the Samsung Camera web page.
(http://www.samsungcamera.com)
108
Starting PC Mode
If you connect the USB cable to a USB port on your PC and then turn on the power, the
camera will automatically switch to "computer connection mode".
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
The auto focus lamp will blink when the files are transferring via the USB connection.
Connecting the camera to a PC
1. Turn the PC power on.
2. Turn the camera power on.
3. In any mode other than Voice Recording mode, press
the MENU button.
BACK:
SET:OK
SET UP
4. Press the LEFT/ RIGHT button and select the [SETUP]
SOUND
menu tab.
LCD
5. Select the [USB] menu by pressing the UP/ DOWN
VIDEO
Q.VIEW
COMPUTER
button and press the RIGHT button.
USB
PRINTER
6. Use the UP and DOWN buttons to select
[COMPUTER], and then press the OK button.
7. Press the menu button twice and the menu will disappear.
8. Connect the PC and the camera via the USB cable.
- Insert the small plug of the USB cable into the camera USB connection terminal.
- Insert the large connector of the USB cable into the USB port of the PC.
- The plugs must be firmly inserted.
If you selected [PRINTER] in Step 6,
when you connect the camera to your
computer, the [CONNECTING...]
message will be displayed on the LCD
monitor and the connection will not be
established. In this case, disconnect the
USB cable, and then follow the procedure
from Step 3 and onward.
Disconnecting the camera and PC : Refer to page 114 (Removing the removable disk).
INFORMATION
The camera driver must be installed before using PC mode.
To save battery power, it is recommended that you use an AC adapter (Optional) when
connecting the camera to a computer.
109
Starting PC Mode
Downloading stored images
You can download the still images stored on the camera to your PC's hard disk and print
them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
[My computer] and double click [Removable
Disk DCIM 100SSCAM].
The image files will then be displayed.
If both the SD memory card and MS DUO are
inserted, two [REMOVEABLE DISK] will be
displayed.
3. Select an image and press the right mouse
button.
4. A pop-up menu will open.
Click [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy] : copies files.
5. Click a folder where you want to paste the file.
110
Starting PC Mode
6. Press the right mouse button and a pop-up
menu will open. Click [Paste].
7. An image file is transferred from the camera to
your PC.
- By using [Digimax Viewer], you can see the stored images in the memory directly on the PC
monitor and you can copy or move the image files.
111
Removing the USB Driver for Windows 98SE
To remove the USB driver, refer to the process shown below.
1. Trace [Start
Settings] and click [Control Panel].
2. Double-click [Add/Remove programs].
3. The [Add/Remove Programs Properties] window
will open. Click [Digimax V50] and click the
[Add/Remove] button.
[Click !]
4. Uninstallation is complete.
Click the [Finish] button and the window will
disappear.
[Click !]
112
Removable Disk
To use this camera as a Removable Disk, install (p.101) the USB Driver.
1. Before turning the camera power on, connect the camera to the PC with the USB cable.
2. Click [Removable Disk] under [My computer] or [Windows Explorer].
3. Image files stored in the Removable Disk (DCIM
PC.
100SSCAM) can be transferred to the
INFORMATION
Important information whilst using the Removable Disk
The [Removable Disk] indicator will not show when the camera power is off or the USB
cable is removed.
We recommend that you should copy the images to the PC to view them. Opening
images directly from the removable disk may be subject to unexpected disconnection.
When uploading images from the PC to the camera, ensure that the uploaded file
names are not the same as those already stored on the memory.
When you upload a file that is not taken by this camera to Removable Disk, the [FILE
ERROR!] message will be displayed on the LCD monitor in the PLAY mode, and
nothing is displayed in THUMBNAIL mode.
The auto focus lamp will blink, when a file is
transferred (copy or deletion) between the PC
and the camera. Do not remove the USB cable
until the lamp stops blinking. To remove the USB
cable in Windows 2000/ME/XP, use the [Unplug
or Eject Hardware] icon on the task bar.
If your PC wasn't patched with Windows 2000 Service Packs 4, the Memory Stick Duo
isn't recognized as a removable disk. To use the Memory Stick Duo as a removable
disk, you have to download and install the Windows Service Packs 4.
113
Removing the removable disk
Windows 98SE
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you
have to wait until the lamp illuminates.
2. Unplug the USB cable.
Windows 2000/ME/XP
(The illustrations may be different from the real display in accordance with the Windows O/S.)
1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you
have to wait until the lamp illuminates.
2. Double-click the [Unplug or Eject Hardware]
icon on the task bar.
[Double-click!]
3. The [Unplug or Eject Hardware] window will
open. Select the [USB Mass Storage Device]
and click the [Stop] button.
[Click!]
4. The [Stop a Hardware device] window will
open. Select the [USB Mass Storage Device]
and click the [OK] button.
[Click!]
5. A [Safe to Remove Hardware] window will
open. Click the [OK] button.
[Click!]
114
Removing the removable disk
6. A [Unplug or Eject Hardware] window will
open. Click the [Close] button and the
removable disk will be removed safely.
7. Unplug the USB cable.
[Click!]
Setting up the USB Driver for MAC
1. A USB Driver for MAC is not included with the software CD as MAC OS supports the
camera driver.
2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This
camera is compatible with MAC OS 9.0 ~ 10.2.
3. Connect the camera to the Macintosh and turn the camera power on.
4. A new icon will be displayed on the desktop after connecting the camera to the MAC.
Using the USB Driver for MAC
1. Double click a new icon on the desktop and the folder in the memory will be displayed.
2. Select an image file and copy or move it to MAC.
CAUTION
For Mac OS 10.0 or later : First complete uploading from computer to camera and then
remove the removable disk with the Extract command.
Memory Stick Duo/ Pro Duo can only be recognized in the Mac OS 10.0 or later.
115
Digimax Viewer 2.1
This software is only compatible with Windows.
1. To open Digimax Viewer, click the [Start Programs
Samsung Digimax Viewer 2.1 Digimax Viewer
2.1 ] and Digimax Viewer 2.1 will then open.
2. If the [Auto Launch] option is selected, this program will be executed automatically with
recognizing the camera.
3. You can easily use the Digimax viewer 2.1 program as
it offers a FILE menu and TOOL bar.And, you can use
the pop up menu. Click an image and press the right
mouse button.
Digimax Viewer functions are listed below.
- Basic functions
: Copy, Move, Delete, Rotate, Rename, changing file type, Resize,
Property.
- Advanced functions : Print, Slide show, Export, Sending e-mail, On-line print, Web album etc.
INFORMATION
Before deleting images from the camera, you should protect or download images to
your computer that you wish to keep.
Refer to the [Help] menu in Digimax viewer 2.1 for further information.
116
Using PhotoImpression
With PhotoImpression, you can edit or store still images that you downloaded from the camera.
This software is only available in Windows version.
To start the program, click [Start Programs ArcSoft PhotoImpression PhotoImpression].
The following screen will appear.
[ Help Button ]
[ Command Button ]
[ Tool Bar ]
You can use PhotoImpression to perform the following tasks.
Command Button
Button
Description
Imports a picture from an album, a source folder, or the camera/scanner, or
captures screen shots of what is being viewed on the current monitor.
Selects Cut, Resize, Edit Image, Insert Text, Enhance Picture, Insert
Effects, or Layer.
Performs Insert Frame, Insert Borders, Insert Calendar, Insert Greeting
Cards, Insert Template, or Connect with Other Software.
Saves the edited picture, and sends an e-mail or uses it as the background
image.
Outputs the edited picture according to your preferences.
117
Using PhotoImpression
Tool Bar
Button
Description
Button
Description
Resize Layer
Rotate Layer
Flip Layer Horizontally
Rotate All Layers
Undo
Redo
Copy
Paste
Delete Layer
Close Picture
INFORMATION
For detailed instructions on how to use PhotoImpression, please refer to the program's
Help.
118
FAQ
Please check the following if the USB connection malfunctions.
[Case 1]
The camera power is off.
Turn the camera power on. We recommend using an AC power adapter in PC
mode.
[Case 2]
USB Driver is not installed correctly.
Install the USB Driver correctly. Refer to page 101.
[Case 3]
The USB cable is not connected or you are using a cable with an incorrect
specification.
Use a USB cable with the correct specification.
[Case 4]
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and
then turn on the camera.
[Case 5]
There is an unexpected error during file transfer
Turn the camera power off and on again. Transfer the file again.
[Case 6]
How do I know my computer supports a USB Interface?
Check the USB port in your computer or keyboard.
Check the OS version. A USB Interface is available in Windows 98, 98SE,
2000, ME .XP.
Check [Universal Serial Bus controllers] in Device Manager. Do the following to
check [Universal Serial Bus controllers].
Win 98/ME
: Trace [Start Settings Control Panel System
Device Manager
Universal Serial Bus controllers].
Win 2000
: Trace [Start Settings Control Panel System
Hardware Device Manager Universal Serial Bus
controllers].
119
FAQ
Win XP
: Trace [Start Control Panel Performance and
Maintenance System Hardware Device Manager
Universal Serial Bus controllers].
There must be USB Host Controller and USB root hub under [Universal Serial
Bus controllers].
In addition, double-click on the USB Universal Host Controller and the USB
Root Hub to check if the Device Status states "This device is working properly".
If the Device Status says the device is "not working properly", click the "Driver"
tab and then click [Update Driver] or [Reinstall Driver].
When all the conditions mentioned above are met, the computer can support
the USB interface.
[Case 7]
When using the USB hub.
There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible. Wherever possible, connect the
camera to the PC directly.
[Case 8]
Are other USB cables connected to the PC?
The camera may malfunction when it is connected to the PC at the same time
as another USB cable. In this case, disconnect the other USB cable, and
connect only one USB cable to the camera.
[Case 9]
When I open the Device Manager (by clicking Start (Settings) Control
Panel (Performance and Maintenance) System (Hardware) Device
Manager), there are Unknown Devices or Other Devices entries with a
yellow question mark(?) beside them or devices with an exclamation mark(!)
beside them.
Right-click on the entry with the question(?) or exclamation (!) mark and select
"Remove". Restart the PC and connect the camera the again. For Windows 98
PC, remove the camera driver also, restart the PC, and then reinstall the
camera driver.
Double-click on the entry with the question (?) or exclamation (!) mark, click the
"Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears
asking you to specify the location of the appropriate device driver, specify "USB
Driver" in the CD supplied.
120
MEMO
121
MEMO
122
MEMO
123
SAMSUNG TECHWIN CO., LTD.
OPTICS & DIGITAL IMAGING DIVISION
145-3, SANGDAEWON 1-DONG, JUNGWONGU,SUNGNAM-CITY, KYUNGKI-DO, KOREA
462-121
TEL : (82) 31-740-8086,8088, 8090, 8092, 8099
FAX : (82) 31-740-8398, 8111
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
HEADQUARTERS
40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A.
TEL : (1) 201-902-0347
FAX : (1) 201-902-9342
WESTERN REGIONAL OFFICE
18600 BROADWICK ST.,
RANCHO DOMINGUEZ, CA 90220, U.S.A.
TEL : (1) 310-900-5263/5264
FAX : (1) 310-537-1566
SAMSUNG OPTO-ELECTRONICS UK LIMITED
SAMSUNG HOUSE
1000 HILLSWOOD DRIVE
HILLSWOOD BUSINESS PARK
CHERTSEY KT16 OPS U.K.
TEL : +44 (0) 1932 455300
FAX : +44 (0) 1932 455325
SAMSUNG OPTO-ELECTRONICS GMBH
AM KRONBERGER HANG 6
D-65824 SCHWALBACH/TS., GERMANY
TEL : (49) 6196 66 53 03
FAX : (49) 6196 66 53 66
SAMSUNG FRANCE S.A.S.
BP 51 TOUR MAINE MONTPARNASSE
33, AV .DU MAINE
75755, PARIS CEDEX 15, FRANCE
HOTLINE PHOTO NUMÉRIQUE :
00 800 22 26 37 27(Numéro Vert-Appel Gratuit)
TEL : (33) 1-4279-2282/5
FAX : (33) 1-4320-4510
SAMSUNG TECHWIN MOSCOW OFFICE
RUSSIA, 125167, MOSCOW LENNINGRADSKY,
PR-KT, 37-A, KORP14
TEL : (7) 095-258-9299/96/98
FAX : (7) 095-258-9297
http://www.samsungcamera.ru
ENGLISH
TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD.
7 PINGCHANG ROAD NANKAI DIST., TIANJIN
P.R CHINA
POST CODE:300190
TEL : (86) 22-2761-8867
FAX : (86) 22-2761-8864
User's Manual
Internet address - http : //www.samsungcamera.com/
The CE Mark is a Directive conformity
mark of the European Community (EC)
6806-1998
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images, downloading images and
using the application software. Please read this manual carefully before using your new camera.