ViewSonic PerfectFlat PF77 User`s guide

PF77
Color Monitor
User’s Guide
Guide de l’utilisateur
Bedienungsanleitung
(International Spanish)
(Italian)
(Brazilian Portuguese)
(Swedish)
(Russian)
(Polish)
(Arabic)
PerfectFlat®
Full 17" (16.0" Diagonal Viewable)
Copyright © ViewSonic Corporation, 1999. All right reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, PerfectFlat, and ViewMeter are registered
trademarks of ViewSonic Corporation. OptiSync is a trademark of ViewSonic.
ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA).
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.
E
N
G
L
I
S
H
Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential damages resulting from
furnishing this material, or the performance or use this product .
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
As an ENERGY STAR® partner, ViewSonic Corp. has determinded that this product meets the
ENERGY STAR® guidelines for energy efficiency.
Electronic Warranty Registration
To meet your future needs, and to receive any additional product information as it
becomes available, please register your monitor's warranty on the Internet at:
http://www.viewsonic.com.
For Your Records
Write the Serial Number (see back of ViewPanel) and the Purchase Date in the
spaces below. Keep this User Guide as a permanent record of your purchase to
help with identification in the event of theft or loss.
ViewSonic PF77
Product Name:
ViewSonic PF77
Model Number:
Serial Number:
Purchase Date:
VCDTS21574-1
__________________
__________________
Getting Started
1
CONTENTS
For Your Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Getting Started
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
E
N
G
L
I
S
H
Before using the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Quick Installation* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using the Monitor
Setting the Timing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjusting the Screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Other Information
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Appendix
Power Cord Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
*To meet your future needs, and to receive any additional product information as it becomes available,
please register your monitor's warranty on the Internet at: http://www.viewsonic.com.
2
Getting Started
ViewSonic PF77
Getting Started
Congratulations on your purchase of a ViewSonic PF77 color monitor!
You have selected one of the most advanced display devices in the
industry. Features include:
•
•
OptiSync™ technology—
makes the PF77 capable of accepting
virtually any of today's analog and
tomorrow's digital (DVI) input sources.
E
N
G
L
I
S
H
PerfectFlat® technology— offers an edge-to-edge flat screen for
distortion-free images and minimal light
reflection to prevent eye fatigue.
NOTE: Save the original box and all packing material for future shipping
needs.
NOTE: This product was designed for operation in the magnetic fields of
the hemisphere where it was purchased. The word "Windows®" in this user
guide refers to the following Microsoft® operating systems: Windows '95,
Windows '98, Windows NT®.
Package Contents
Your ViewSonic PF77 package includes the following:
• ViewSonic PF77 monitor
• Video cable: DB-15 (detachable)
DVI-V (detachable)
• Power cord (detachable)
• User Guide
• INF and ICM installation files on CD-ROM or diskette
IMPORTANT: The supplied INF file assures compatibility with Windows operating
systems, and the ICM file (Image Color Matching) ensures accurate on-screen
colors. ViewSonic® recommends that you install both files as shown in the Quick
Installation section on page 5.
ViewSonic PF77
Getting Started
3
Before Using the Monitor
•
•
E
N
G
L
I
S
H
Read Precautions (on this page) and Power Cord Safety Guidelines (on
page 17).
Read Setting the Timing Mode on page 6 before you adjust the
ViewPanel. This will prevent you from making adjustments unnecessarily.
Precautions
• For best viewing conditions sit at
least 18" from the monitor.
• AVOID TOUCHING THE SCREEN
WITH YOUR FINGERS. Oils from
the skin are difficult to remove.
• NEVER REMOVE THE REAR
COVER. The monitor contains highvoltage parts. You may suffer
serious injury if you touch these
parts.
• Avoid exposing the monitor to
direct sunlight or another heat
source. The monitor should be
facing away from direct sunlight to
reduce glare.
4
Getting Started
• Choose a well ventilated area to position
your monitor. Do not place anything on
the monitor that prevents adequate
dissipation of heat.
• Always handle your monitor with care
when moving it.
• Ensure the area around the monitor is
clean and free of moisture.
• Do not place heavy objects on the
monitor, video cable, or power cord.
• CAUTION: If smoke, abnormal
noise, or strange odor is present,
immediately switch the monitor off
and call your dealer or monitor. It is
dangerous to continue using the
monitor in this condition.
ViewSonic PF77
Quick Installation
1 Connect video cable
Make sure both the monitor and the
computer are powered OFF. Connect
the video cable from to the back of the
monitor to the computer.
Macintosh® users: Connect a
Macintosh adapter (part No. VMAC-1) to
the video cable, then to the monitor. To
order an adapter, send an email to
vsparts@viewsonic.com or call
ViewSonic® customer service (see the
back cover of this guide). You will need
to provide your monitor's serial number.
2 Connect power cord
Connect the power cord from the back
of the monitor to a properly grounded
AC outlet, then to the monitor.
3 Power-ON monitor* and
computer
Power-ON the monitor, THEN powerON the computer.
NOTE:
• This sequence (monitor before
computer) is very important.
• At this point Windows® 98 users
may receive a message asking
them to install the PF77s INF file.
4 Install INF and ICM files
• For CD-ROM: Insert the CD-ROM into
your system, wait for it to auto-start,
select “Monitor Drivers,” and follow the
on-screen instructions.
• For diskette: Insert the diskette into
your system, run install.exe, and
follow the on-screen instructions.
E
N
G
L
I
S
H
5 Windows users: Setting the
Timing Mode
See page 6 for procedures to set the
timing mode.
Installation is complete!
Enjoy your new monitor!
To be best prepared for any future customer
service needs:
• Write the serial number (see back of the
monitor) in "For your Records" on page 1 of
this guide.
• Register the warranty of your monitor on the
Internet at: http://www.viewsonic.com
* The monitor automatically degausses each time you turn it on, removing the build-up of
magnetic fields that can affect color purity and convergence. You can also degauss the
monitor by selecting Degauss from the menu shown in the next section of this guide. Do not
degauss repeatedly. Doing so can be harmful to the monitor. Wait 20 minutes between turning
the monitor off and on again.
Back of computer
Monitor
Analog video port
(D-sub)
Digital video port
(DVI-V)
Digital video cable
AC Outlet
Analog video cable
Power cord
ViewSonic PF77
Getting Started
5
Using the Monitor
Setting the Timing Mode
The timing mode consists of the resolution and refresh rate (vertical frequency).
After setting the timing mode, use the OnView® controls (pages 7-12) to make
adjustments.
The recommended timing mode for this monitor is either: VESA 1024 x 768 @
75Hz or VESA 1600 x 1200 @ 75Hz.
To set the Timing Mode:
1 Set the resolution: Right-click on the Windows® desktop > Properties >
Settings > Desktop Area > set the resolution (example 1024 x 768).
2 Set the refresh rate: See your graphic card's user guide for instructions.
NOTE: To minimize the adjustments required for an optimal screen image,
select a timing mode from the Preset Timing Modes table below.
Preset Timing Modes
VGA 640 x 400 @ 70Hz
VESA 640 x 480 @ 75Hz
VESA 800 x 600 @ 75Hz
VESA 800 x 600 @ 85Hz
VESA 1024 x 768 @ 75 & 85Hz
VESA 1280 x 1024 @ 75 & 85Hz
VESA 1600 x 1200 @ 75Hz
Macintosh® 832 x 624 @ 75Hz
Macintosh 1024 x 768 @ 75Hz
Macintosh 1152 x 870 @ 75Hz
WARNING: Do NOT set the graphics card in your computer to exceed the
maximum refresh rate for each resolution shown below in the Maximum
Refresh Rates table. Doing so may result in permanent damage to your
ViewPanel.
Maximum Refresh Rates
Analog
1600 x 1200 NI @ 77Hz
1280 x 1024 NI @ 89Hz
1152 x 870 NI @ 104Hz
1024 x 768 NI @ 118Hz
832 x 624 NI @ 143Hz
800 x 600 NI @ 148Hz
640 x 480 NI @ 180Hz
Digital
1280 x 1024 NI @ 85Hz
1152 x 870 NI @ 104Hz
1024 x 768 NI @ 118Hz
832 x 624 NI @ 143Hz
800 x 600 NI @ 148Hz
640 x 480 NI @ 180Hz
(NI= Non Interlaced)
6
Using the Monitor
ViewSonic PF77
Adjustments to the screen image are made by using the Front Control Panel to
Front
Control
Panel
Main Menu
➊
➋
➌
Press Button [2] to select the
highlighted control. IMPORTANT:
▼] to toggle to the
Press [▼
second in the pair of
adjustments.
Press [▼] or [▲] to
highlight the control
you wish to adjust.
1
➎
2
➍
Press [▼] or [▲] to
adjust the control.
ViewSonic PF77
Power On/Off
Button
Power light:
Green = on
Orange = power saving
mode
Using the Monitor
7
Menu Controls
Follow steps 1–5 on page 7 to access and adjust the controls on the Main
Menus shown below.
CONTRAST adjusts the difference between the image background
(black level) and the foreground (white level).
[▼] Decreases contrast
[▲ ] Increases contrast.
BRIGHTNESS adjusts the background black level of the screen
image.
[▼] Decreases brightness
[▲] Increases brightness.
8
Using the Monitor
ViewSonic PF77
To exit the OnView® menu or screen & save changes, press button [1].
For options that appear as pairs on the menu, highlight an option and
press [▼] to toggle to the second in the pair.
H. SIZE (Horizontal Size) adjusts the width of the screen image.
[▼] Decreases the width of the screen.
[▲] Increases width of the screen.
HORIZONTAL POSITION moves the screen image to the left or
to the right.
[▼] Moves the screen to the left
[▲] Moves the screen to the right.
VERTICAL SIZE adjusts the height of the screen image.
[▼] Decreases the screen height
[▲] Increases the screen height.
VERTICAL POSITION moves the screen image up and down.
[▼] Moves the screen down.
[▲] Moves the screen up.
PINCUSHION curves the vertical sides of the screen image.
[▼] Curves vertical edges inward
[▲] Curves vertical edges outward.
PIN BALANCE curves the vertical sides of the screen image to the
left or to the right.
[▼] Curves vertical sides to the left
[▲] Curves the vertical sides to the right.
TRAPEZOID makes the vertical edges of the screen image
parallel.
[▼] Narrows the screen image at the top and widens it at the bottom
[▲] Widens the screen image at the top and narrows it at the bottom
PARALLELOGRAM slants the vertical edges of the screen image
[▼] Slants vertical edges to the left
[▲] Slants vertical edges to the right.
ZOOM expands and contracts the entire screen image
[▼] Expands the screen image
[▲] Contracts the screen image.
ViewSonic PF77
Using the Monitor
9
To exit the OnView® menu or screen & save changes, press button [1].
For options that appear as pairs on the menu, highlight an option and
press [▼] to toggle to the second in the pair.
TILT rotates the entire screen image
[▼] Rotates the screen image counter-clockwise
[▲] Rotates the screen image clockwise.
VIEWMETER ® displays information regarding the current input
signal coming from the graphics card of the computer.
H. CONVERGENCE (Horizontal Convergence) adjusts vertical
color alignment. Use this control when red or blue borders are
present around the vertical segments of black letters on a white
background.
Press [▼] or [▲] to adjust the color alignment.
V. CONVERGENCE (Vertical Convergence) adjusts horizontal
color alignment. Use this control when red or blue borders are
present around the horizontal segments of black letters on a white
background.
Press [▼] or [▲] to adjust the color alignment.
V. LINEARITY CENTER (Vertical Linearity Center) adjusts the
vertical distortion at the center of the screen image.
Press [▼] or [▲] to adjust.
Note: V. Linearity Center is an advanced control to be used for set
up and calibration only.
V. LINEARITY SYMMETRY (Vertical Linearity Symmetry)
adjusts the vertical distortion by balancing the vertical distortion
between the top and bottom of the screen image.
Press [▼] or [▲] to adjust.
NOTE: V. Linearity Symmetry is an advanced control to be used for
set up and calibration only.
HOOKING straightens the four corners of the screen image.
Press [▼] or [▲] to adjust.
FOCUS adjusts the sharpness of the screen image.
Press [▼] or [▲] to adjust.
10
Using the Monitor
ViewSonic PF77
To exit the OnView® menu or screen & save changes, press button [1].
For options that appear as pairs on the menu, highlight an option and
press [▼] to toggle to the second in the pair.
ViewMatch® provides several color options: preset color temperatures and User Color which allows you to adjust red, green and
blue. The factory setting for this product is 9300K (93000 Kelvin),
the color temperature most frequently used in offices with fluorescent lights.
Press the [▼] or [▲] button to scroll to your selection.
9300K — Adds blue to the screen image for cooler white (used in
most office settings with fluorescent lighting).
6500K — Adds red to the screen image for warmer white and
richer red.
5000K — Adds blue and green to the screen image for a darker
color.
User Color — Individual adjustments for red (R), green (G), and
blue (B) as shown below.
From this screen, press the [2] button
to select Red, Green, or Blue. Then
press [▼] or [▲] to adjust.
Important: If you select RECALL from the main menu when the
product is set to a Preset Timing Mode, color returns to the 93000 K
preset.
ViewSonic PF77
Using the Monitor
11
To exit the OnView® menu or screen & save changes, press button [1].
For options that appear as pairs on the menu, highlight an option and
press [▼] to toggle to the second in the pair.
PURITY adjusts the uneven color of the overall image. For
example, if one area of a color appears darker than another area,
first use the DEGAUSS feature. If color is still uneven, use the
PURITY control.
Press [▼] or [▲] to adjust.
Press [▼] or [▲] to select/deselect this mode.
OSD POSITION allows you to move the on-screen display menus
and control screens.
Press [▼] or [▲] to move the OSD.
MOIRE reduces interference patterns that appear as ripples, waves,
or unwanted background color textures. Interference patterns of
this type are most noticeable when viewing images having closely
spaced lines or finely detailed patterns.
Press [▼] or [▲] to minimize interference patterns.
DEGAUSS removes the build-up of magnetic fields that can cause
irregular colors to appear around the edges of screen images. There
are two ways to degauss the display: automatically by turning the
monitor on, or manually by selecting the Degauss control from the
menu.
Important: Do not degauss repeatedly. Doing so can be harmful to
the display. Wait at least 20 minutes (before selecting this control
again.
LANGUAGE allows you to choose from among several languages
for the menu(s) and control screens: English, French, German,
Italian, and Spanish.
Press [▼] or [▲] to select a language.
DATA RECALL returns adjustments to the original factory
settings if the display is operating in a factory Preset Timing Mode
listed in this guide.
INPUT SELECT allows you to toggle between two or more input
signals: for example, analog (D-Sub) and digital (DVI-V).
Press [▼] or [▲] to select an input signal.
12
Using the Monitor
ViewSonic PF77
Other Information
Specifications
CRT
Type
Phosphor
Glass surface
17" (16.0" viewable diagonal area), PerfectFlat®
0.25mm aperture grille pitch, 90° deflection
RGB, medium short persistence
Anti-reflective and anti-static coating
Standard light transmission rate = 41.5%
Analog Input
Signal
Video
Sync
RGB analog (0.7 Vp-p, 75 ohms),
fh: 30-97 kHz, fv: 50-180 Hz, H/V Separate (TTL),
Composite, and Sync on Green
Digital Input
Signal
Format
Conforms to DVI (Digital Visual Interface)
specification
Compatibility
PC
Macintosh®*1
Up to 1600 x 1200 NI
Power Macintosh® from 640 x 480 up to 1600 x
1200 (requires Macintosh cable adapter)
Power
Voltage
AC 90-264 VAC (auto switch) 50-60 Hz
Display Area
Factory setting
Full scan
300 mm (H) x 225 mm (V) typical
325mm (H) x 243 mm (V)
Operating
Conditions
Temperature
Humidity
Altitude
32°F to 104°F (0°C to 40°C)
5% to 95% (no condensation)
To 10,000 feet
Storage
Conditions
Temperature
Humidity
Altitude
-40°F to +140°F (-40°C to +60°C)
5% to 95% (no condensation)
To 40,000 feet
Dimensions
Physical
(monitor)
417mm (W) x 434mm (H) x 439mm (D)
16.4" (W) x 17.1" (H) x 17.3" (D)
Weight
Net
20 kgs (44 lbs) Monitor only
Regulations
Power saving
modes
E
N
G
L
I
S
H
UL, CSA, FCC-B, CB, ISO9241-3, CE, DHHS,
DOC.B, MPR-II, NOM, IRAM, TUV/GS, VCCI,
BSMI, S-Mark, C-Tick, S. Africa, TUV/Ergo,
NEMKO, SEMKO, DEMKO, FEMKO, B-Mark,
PCT, SASO, CCIB, EMI-B, TCO 99, ENERGY STAR
On
DPMSTM Suspend
DPMS Off
<130W (green LED)
<15W (orange LED)
<3W (blinking orange LED)
Preset Timing Modes
®
Pre-adjusted to VESA 1024 x 768 @ 75Hz and VESA 1600 x
1200 @ 75 HZ). See page 6 for preset timing modes table.
Macintosh computers may require a ViewSonic® Macintosh adapter. To order an adapter, send an email to
vsparts@viewsonic.com, or contact ViewSonic. See the back cover of this guide.
*2 Warning: Do not set the graphics card in your computer to exceed these maximum refresh rates.
Doing so may result in permanent damage to the monitor. NI= Non Interlaced.
ViewSonic PF77
Other Information
13
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the back of the
monitor and to a power outlet.
• Plug another electrical device (like a radio) into the power outlet to verify
that the outlet is supplying proper voltage.
Power on but no screen image
• Make sure the video cable supplied with the monitor is tightly secured to
the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the monitor, tightly secure it
to the monitor.
• Adjust brightness and contrast.
• Check this user's guide to see if an adapter is required for proper signal
continuity between graphics card and monitor.
Flickering
• Not enough power supplied. Connect the monitor to a different outlet. If
using a surge protector, reduce the number of devices plugged in.
• Check the ViewMeter® from the main menu (page 10) to verify the refresh
rate (vertical frequency) is 75 Hz or higher.
• Make sure the graphics card in your computer can use non-interlaced
mode at the desired frequencies. To enable your graphics card to support
higher refresh rates, try selecting fewer colors or running lower
resolutions.
• Remove any devices from the area around the monitor that emits
magnetic fields such as radios, surge protectors, unshielded speakers,
fluorescent lights, AC power converters, desk fans, etc.
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to
make sure it is securely connected. Loose or broken pins in the cable
connector could cause an improper connection.
• Connect the monitor to another computer.
• Select Degauss from the Main Menu. Do this only once.
• If you have an older graphics card, contact ViewSonic® Customer
Support for a non-DDC adapter.
Entire screen image scrolls (rolls) vertically
• Make sure video input signals are within the monitor's specified
frequency range.
• Try the monitor with another power source, graphics card, or computer
system.
• Connect the video cable securely.
Control buttons do not work
• Press only one button at a time.
E
N
G
L
I
S
H
14
Other Information
ViewSonic PF77
Cleaning the Monitor
•
•
MAKE SURE THE MONITOR IS TURNED OFF.
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE
SCREEN OR CASE.
To clean the screen:
1
2
Wipe the screen with a clean, soft, lint-free cloth. This removes dust
and other particles.
If still not clean, apply a small amount of non-ammonia, non-alcohol
based glass cleaner onto a clean, soft, lint-free cloth, and wipe the
screen.
E
N
G
L
I
S
H
To clean the case:
1
2
Use a soft, dry cloth.
If still not clean, apply a small amount of a non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth,
then wipe the surface.
DISCLAIMER
ViewSonic® does not recommend the use of any ammonia or alcohol-based
cleaners on the monitor screen or case. Some chemical cleaners have been
reported to damage the screen and/or case of the monitor. ViewSonic will
not be liable for damage resulting from use of any ammonia or alcoholbased cleaners.
ViewSonic PF77
Other Information
15
LIMITED WARRANTY
VIEWSONIC MONITORS
What the warranty covers:
ViewSonic® warrants its products to be free from defects in material and workmanship during the
warranty period. If a product proves to be defective in material or workmanship during the warranty
period, ViewSonic will, at its sole option, repair or replace the product with a like product.
Replacement product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic color monitors, including the display tubes, are warranted for three (3) years for all
parts and three (3) years for all labor from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
E
N
G
L
I
S
H
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. FOR INFORMATION ABOUT RECEIVING SERVICE UNDER WARRANTY, CONTACT
VIEWSONIC CUSTOMER SUPPORT. YOU WILL NEED TO PROVIDE YOUR PRODUCT'S
SERIAL NUMBER.
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip,
(b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of
the product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic
service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact
ViewSonic.
Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Exclusion of damages:
VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE
PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES
BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF
PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. Some states do not allow limitations on implied warranties and/or do not allow the
exclusion of incidental or consequential damages, so the above limitations and exclusions may
not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and
Canada, contact ViewSonic or your local ViewSonic dealer.
ViewSonic Monitor Warranty (V2.0)
16
Other Information
Release Date: 10-15-1999
ViewSonic PF77
Customer Service
To receive the most prompt assistance,
dial the appropriate number below and
listen to all menu options before
making your selection: Customer
Support, Technical Support, Parts, etc.
U.S. and Canada only
1-800-688-6688
From outside U.S. and Canada
909-869-7976
From Europe
44 (1293) 643-900
From Asian/Pacific Rim countries
886 (22) 248-4072
Other Options
Technical Support Questions
vstech@viewsonic.com
Product or Dealer Questions
prodinfo@viewsonic.com
World Wide Web:
http://www.viewsonic.com
ViewSonic® Corporation
381 Brea Canyon Road
Walnut, CA 91789
Tel (909) 869-7976
Tel (800) 688-6688
Fax (909) 468-1202
11/99