“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
The Omni Waste Oil Boilers
OWB-50 the front and side
Easy clean up with swing out door
OWB-50 showing the back
Boiler Specifications
Models
OWB-9
OWB-15
OWB-25
OWB-35
OWB-50
Output Capacity BTU/HR
76,500
127,500
212,500
297,500
425,000
Net Rating, Water BTU/HR
66,500
110,800
184,700
258,600
369,500
Net Rating, Water Sq. Ft.
522
875
1,450
2,030
2,900
Burner GPH
0.60
1.00
1.70
2.40
3.30
Flue Diameter, In.
7
7
7
10
10
Shipping Weight, lbs.
580
780
980
2,080
2,280
Width, In.
23
33
42
52-5/8
57-5/8
Height, In.
24-5/8
24-5/8
24-5/8
36-1/2
36-1/2
Depth, In.
23-3/4
23-3/4
23-3/4
33-1/4
33-1/4
Approx. Water Content, Gal.
5.5
8.2
10.8
28.5
31.7
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com
“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com
“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
Waste Oil Boiler Standard Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Refractory Insulated Hinged Front
Door with Sight Glass
Insulated Jacket
ASME Relief Valve 30 PSI
Theraltimeter Gauge
Draft Inducer (Optional)
Boiler Drain
High Limit Aquastat Relay
Combination (L-8148A) Except
Models 35 And 50
Circulator - Except Models 35 And 50
Relay - Models 35 And 50 Only
Flow Control Oil Supply Pump
Serviceable Oil Filter
Pre-built Control Manifold
Models 35 And 50 Only
Low Water Cutoff Control
Manual Reset High Limit Aquastat
Control
High Grade Stainless Steel Combustion
Chamber Liner
Easy to Maintain
Swing out door allows money saving serviceability to the High Grade Stainless Steel Combustion
Chamber Liner and the heat transfer surfaces. The high-grade stainless steel combustion chamber liner
allows for easier cleanup and better burn efficiency. Unlike traditional boilers that require hours of
disassembly, the Omni’s hinged front door provides instant access to all of the boilers' interior surfaces.
All service and cleaning can be completed
literally in minutes, creating additional
savings. A clean boiler is a more efficient
boiler.
A Revolutionary Boiler Design
Omni’s unique design provides high
efficiency. The OMNI cast iron boiler is a
revolutionary idea in industrial heating. It
utilizes the highly efficient, extremely
durable Scotch Marine design principle that
has been proven in decades of use in large
commercial and industrial heating systems.
Crown Boiler Company of Germany
manufactures the boiler and the sections are
assembled there as well.
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com
“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
OMNI’s Three Pass Scotch Marine Design
This unique wet base design passes the hot combustion
gases three times through the boiler under negative
pressure. This maximizes the gases contact with the
boiler's water transfer surface area. The result: 84%
Efficiency, Burns Clean, Zero Smoke
Our competitor's conventional one-pass design is less
efficient and requires time-consuming, cumbersome
disassembly of parts for cleaning.
Superior Performance with Omni’s Patented Flame Control System.
Omni includes built-in vane oil-less compressor as standard equipment. Our
compressor requires no maintenance and allows the unit to be operated 24
hours/day without an external air supply. You eliminate the risk of
destroying a shop air compressor if an airline were to rupture.
Industry's ONLY Non-Carboning Oil
Preheater block with Solid State
circuit board controller.
These items precisely control the oil
and air temperatures to insure stable
viscosity for optimum control of the
flame resulting in a thorough burn.
The heater block never carbons or
needs to be removed for cleaning.
Industry normal annual parts kit not
needed with Omni's system! Readjustment of electrodes and nozzle
replacement every 5 years is all that
is needed due to erosion only.
Oil Flow Control Supply Pump with variable DC Motor has the ability to control a stable flame even
when various viscosities of fuel are used like 10 to 90 weight motor oil, fuel oils, vegetable oil, mineral
oil, kerosene, diesel, transmission fluid, synthetic oil after it’s been used and gasoline up to 30% by tank
volume. The motor can push the waste oil over 100 feet in distance and 25 feet in elevation.
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com
“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
Omni Waste Oil Boilers Models and Specification
Model
BTU/HR Input
OWB-9
90,000
BTU/HR Output
@ 2000 feet elevation
@ 3000 feet elevation
@ 4000 feet elevation
@ 5000 feet elevation
@ 6000 feet elevation
@ 7000 feet elevation
@ 8000 feet elevation
@ 9000 feet elevation
@10000 feet elevation
@11000 feet elevation
Gallons per Hour
Voltage Requirements
Amps, Full Load
w/pump
Exhaust Vent inches
Price of Units
OWB-15
150,000
OWB-25
250,000
OWB-35
350,000
OWB-50
500,000
76,500
127,500
212,500
297,500
425,000
72,900
69,300
65,700
62,100
58,500
54,900
51,300
47,700
44,100
121,500
115,500
109,500
103,500
97,500
91,500
85,500
79,500
73,500
202,500
192,500
182,500
172,500
162,500
152,500
142,500
132,500
122,500
283,500
269,500
255,500
241,500
227,500
213,500
199,500
185,500
171,500
405,000
385,000
365,000
345,000
325,000
305,000
285,000
265,000
245,000
0.60
115
10.5
1.00
115
10.5
1.70
115
10.5
2.40
115
10.5
3.30
115
10.5
7
7
7
10
10
$6,295
$7,295
$8,295
$12,595
4% reduction of output for every 1,000 feet of elevation
$13,595
Adjustments can be made to the flow rate of the oil from the pump, to increase
the BTU’s of the OWB-9, OWB-15, OWB-25, OWB-35 and OWB-50 boilers. This
should be done with a beaker test to determine the flow rate. High elevation
changes to the air bands may not be effective.
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com
“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
Compare Boiler Features
OMNI
Other
Manufacturer
Non-Carboning Heater Block
N/A
Fully Self-Contained Burner (onboard oil and air
pump) Select Model
N/A
On-Burner Air Compressor
one other
Burns 90 Weight and Synthetic Oils
N/A
Heaters and Boilers are both backed by the
industry's most comprehensive full 12 Year NonProRated Limited Warranty
Braised Plate Stainless Steel Exchangers (high
grade)
Burner and Combustion Chamber End Plate Doors
Both Swing Out for Easiest Cleaning
Exclusive 3 Pass Design provides the longest burn
with the highest efficiency (87% Efficiency)
Patented Oil Flow System controls fuel by volume.
No adjustments needed for various viscosities
N/A
N/A
N/A
N/A
N/A
What You Would Have to Pay a Competitor to Match OMNI
Standard Features
•
•
•
•
•
•
•
•
Annual Burner Repair Kit: $200+
Optional On-Board Air Compressor: $300-$600+ Additional Compressor
Increases Electrical Demand - Costs: $??
Optional Oil Flow Control Supply Pump: $400+
Additional Costs for Ductible Units: $300 - $800+
Maximum Burn 50 Weight
Optional Longer Life Stainless Steel Construction: $300+
Annual or MORE Preheater Carbon Flush Service Costs: $??
More Service Technician Costs such as Travel and Time: $??
There is No Comparison Between OMNI & the Other Brands.
We Continue To Transcend & Evolve While Others Grow
Stale. The Least Amount of Maintenance With the Highest
Return On Investment.
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com
“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
Look at the OMNI Advantages
Long burn path combined with scotch marine triple pass design provides
the best combination of high efficiency and super-low maintenance.
Stainless steel chamber is standard. OMNI waste oil boilers feature high grade
stainless steel combustion chamber liner. Stainless steel is the longest lasting, most
durable material available for high temperature applications of waste oil burning.
This liner creates a secondary burn resulting in a more thorough burn - less ash
build up.
Patented Oil Flow System controls fuel by volume. OMNI's patented flow
control system regulates fuel by volume. Conventional waste oil burners use a
preset pump and control fuel delivery with a fuel pressure regulator. This
conventional system creates variable to fuel flow and cause over and under firing.
Swing out burner. Allows easy access for cleaning of burner nozzle and end cone
if needed. Combustion chamber annual clean out is easy. OMNI provides complete
access to inside of combustion chamber and heat exchangers with the largest
openings in the industry. Large boilers come equiped with flue brushes.
Full access clean out door. OMNI provides complete access to the inside of heat
exchanger and combustion chamber through our full clean out panel. Other
manufacturers provide only limited access or require clean out of exchangers which
are too small to thoroughly reach.
OMNI burns fuels from kerosene to 90W gear oil (including synthetics).
OMNI's hands-off system combines our patented oil preheat and oil flow control to
burn a wider range of fuel than other waste oil burners, with no
adjustments.
Highest quality heaters/boilers/air conditioners on the market. OMNI's
advanced design, high level of quality and craftsmanship combine to make OMNI
the premier unit in the industry today.
State of the art, solid stat Oil Preheat System. OMNI's patented system
provides consistent oil temperature and viscosity to the burner. Solid state controls
allow only a 3° variance in oil temperature. This maintains oil viscosity and results
in the most thorough, clean and consistent burn available. Other manufacturers'
mechanical preheat systems allow large temperature variances which cause varied
fuel viscosity and inconsistent flame in combustion chamber, resulting in uneven
heat and quicker failure of chamber.
Preheater heats both oil and air at the same time for optimum atomization
(spray) and completeness of burn.
Electronic oil shut off valve eliminates nozzle drip - won't allow stalagmite
of sludge at the bottom of the chamber.
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com
“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
Patented Oil Preheat System ELIMINATES the need for routine disassembly
of your burner to scrape out carbon build up in the oil heat block. OMNI's
patented oil preheater uses advanced technology to eliminate the need for cleaning.
Our superior design will not carbon. OMNI is the only manufacturer that can say
this!
Built-in air compressor. OMNI includes a built-in vane oil-less compressor as
standard equipment. Our compressor requires no maintenance and allows the unit
to be operated 24 hours/day without an external air supply. You eliminate the risk
of destroying a shop air compressor if an air line were to rupture.
Omni Waste Oil Boilers
Limited Warranty
Econo Heat (manufacturer) warrants to the purchaser of Waste Oil Boilers will be free from defects in
materials and workmanship for the durations specified below, which duration begins on the date of
delivery to the customer. Customer is responsible for maintaining proof of date of delivery.
If return is deemed necessary for warranty evaluation and determination of repair or replacement, boiler
is to be sent to the factory with freight prepaid. Econo Heat reserves the right to determine appropriate
action for repair or replacement.
No parts will be accepted by Econo Heat without RA# (return authorization number) clearly marked on
outside of shipping package. Obtaining RA# requires model and serial numbers, description of part
being replaced and nature of defect. Call factory to receive RA#.
Warranty Covers:
1. Boiler Cast Iron Jacket, Twelve (12) years. (Parts Only)
2. Stainless Steel Combustion Tube Insert, five (5) years limited. (Part Only)
3. Oil Pre-Heater Block, twenty (20) years. (Part Only)
4. Oil Pre-Heater Block Controller PCB, three (3) years. (Part Only)
5. All other components, one (1) year. (Parts Only)
This warranty is void if:
1. Warranty registration card is not returned within thirty (30) days of purchase.
2. Any part or component subject to abuse or altered from original manufactures specifications.
3. Installation not in accordance with instructions.
4. Has not been properly maintained, operated or has been misused.
5. Wiring not in accordance with diagram furnished with boiler.
6. Boiler is operated in the presence of chlorinated vapors.
Warranty is limited to the original purchaser.
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com
“BUILT TO STAND THE TEST OF TIME”
WASTE-OIL FIRED EQUIPMENT By
, INC
The above warranty is in lieu of all other warranties expressed or implied. Econo Heat does not
authorize any person or representative to make or assume any other obligation or liability that is not in
accordance with above warranty. Econo Heat is not responsible for any labor cost unless prior
authorization in writing has been obtained.
800-255-1363
Omni by Econo Heat Inc.
5714 East First Avenue, Spokane, WA 99212
www.econoheat.com