Compaq Compaq Presario,Presario 901 Programming instructions

Compaq Presario Desktop Products
Warranty and
Support Guide
1 Year Parts & Labor
.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 1 of 18
Printed: 02/05/03 03:46 PM
© 2003 Hewlett-Packard Company
© 2003 Hewlett-Packard Development Company, L.P.
Microsoft, Windows, and Windows XP are trademarks of Microsoft Corporation in
the U.S. and other countries/regions.
Intel, Pentium, Intel Inside, and Celeron are trademarks of Intel Corporation.
All other product names mentioned herein may be trademarks of their respective
companies.
HP shall not be liable for technical or editorial errors or omissions contained
herein. The information in this document is provided “as is” without warranty of
any kind and is subject to change without notice. The warranties for HP products
are set forth in the express warranty statements accompanying such products.
Nothing herein should be construed as constituting an additional
warranty.
WARNING: Text set off in this manner indicates that failure to follow
directions could result in damage to equipment, loss of information,
bodily harm, or loss of life.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 2 of 18
Printed: 02/05/03 03:46 PM
CONTACT NUMBERS
UNITED KINGDOM
Technical Support
www.compaq.co.uk/support/index.html
0870 010 4320 (U.K.)
When you hear the welcome message,
press 9.
Or
1890 92 39 02 (Republic of Ireland)
For PCs bought from PC World, Currys,
or Dixons, call 0870 901 3000.
For out-of-warranty products, call
0906-4700870 (60 p/mn).
Before contacting Compaq Technical Support, it’s important to have the
following information handy. Please take a moment to write down your
product information for future reference.
Product Name:
Model Name:
Serial Number:
Date of Purchase:
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 3 of 18
Printed: 02/05/03 03:46 PM
Compaq Software License Terms
The following License Terms govern your use of the accompanying Software unless you have a
separate signed agreement with Compaq.
License Grant
Compaq grants you a license to use one copy of the Software. “Use” means storing, loading,
installing, executing, or displaying the Software. You may use the Software only on one computer
or processor at any one time. You may not modify the Software or disable any licensing or control
features of the Software. If the Software is licensed for “concurrent use,” you may not allow more
than the maximum number of authorised users to Use the Software concurrently.
Ownership
The Software is owned and copyrighted by Compaq, its subsidiaries, or its third-party suppliers.
Your license confers no title to, or ownership in, the Software and is not a sale of any rights in the
Software. Compaq’s third-party suppliers may protect their rights in the event of any violation of
these License Terms.
Copies and Adaptations
You may only make copies or adaptations of the Software for archival purposes or when copying
or adaptation is an essential step in the authorised Use of the Software. You must reproduce all
copyright notices in the original Software on all copies or adaptations. You may not copy the
accompanying documentation, even in part, without Compaq’s prior written consent. You may not
copy the Software or documentation onto any public network.
No Disassembly or Decryption
You may not disassemble or decompile the Software unless Compaq’s prior written consent is
obtained. In some jurisdictions, Compaq’s consent may not be required for limited disassembly
or decompilation. Upon request, you will provide Compaq with reasonably detailed information
regarding any disassembly or decompilation. You may not decrypt the Software unless decryption
is a necessary part of the operation of the Software.
Transfer
Your license will automatically terminate upon any transfer of the Software. Upon transfer, you must
deliver the Software, including any copies and related documentation, to the transferee. The
transferee must accept these License Terms as a condition to the transfer.
Termination
Compaq may terminate your license upon notice for failure to comply with any of these License
Terms. Upon termination, you must immediately destroy the Software, together with all copies,
adaptations, and merged portions in any form.
Export Requirements
You may not export or re-export the Software or any copy or adaptation in violation of any
applicable laws or regulations.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 4 of 18
Printed: 02/05/03 03:46 PM
Restricted Rights
The Software and any accompanying documentation have been developed entirely at private
expense. They are delivered and licensed as “commercial computer software” as defined in
DFARS 252.227-7013 (Oct 1988), DFARS 252.211-7015 (May 1991), or DFARS 252.227-7014
(Jun 1995), as a “commercial item” as defined in FAR 2.101(a), or as “Restricted computer
software” as defined in FAR 52.227-19 (Jun 1987) (or any equivalent agency regulation or
contract clause), whichever is applicable. You have only those rights provided for such Software
and any accompanying documentation by the applicable FAR or DFARS clause or the Compaq
standard software agreement for the product involved.
(Rev. 090502)
Compaq Warranty Statement
DURATION OF WARRANTY: 1 year
Compaq warrants to you, the end-user customer, that Compaq hardware, accessories, and supplies
are free from defects in materials and workmanship. This warranty begins on the date of purchase
and continues for the period specified above.
Compaq warrants to you, the end-user customer, that the software will not fail to execute its
programming instructions due to defects in material and workmanship when properly installed and
used. Compaq does not warrant that software will operate in hardware and software combinations
selected by you, or meet requirements specified by you.
Where a network interface card (NIC) has been factory preinstalled by Compaq in the
Compaq Presario, Compaq warrants that the correct drivers are installed and that the
Compaq Presario will recognise the NIC. However, Compaq’s warranty does NOT cover
connectivity issues, which are NOT supported.
Compaq products may contain remanufactured parts equivalent to new in performance or may
have been subject to incidental use.
If Compaq receives notice of such defects during the warranty period, Compaq will, at its option,
either repair or replace the affected products that prove to be defective. In case of defective
software, Compaq will replace software media that does not execute its programming instructions
due to such defect. Replacement parts or units will be either new or equivalent to new in
performance.
If Compaq is unable, within a reasonable time, to repair or replace any product to a condition as
warranted, you will be entitled to a refund of the purchase price on a pro-rated basis upon prompt
return of the product. Refunds within the first 3 months of ownership will be refunded at 100% of
purchase price. Refunds within 3–6 months of ownership will be refunded at 85% of purchase
price. Refunds within 6–9 months of ownership will be refunded at 55% of purchase price. Refunds
within 9–12 months will be refunded at 35% of purchase price.
Compaq’s warranty is valid in any country/region or locality where Compaq has a support
presence for this product and where Compaq has marketed this product. The level of warranty
service you receive may vary according to local standards. Compaq will not alter form, fit, or
function of the product to make it operate in a country/region for which it was never intended to
function for legal or regulatory reasons.
Compaq does not warrant that the operation of the products will be uninterrupted or error-free.
Compaq’s warranty does not apply to defects resulting from (a) improper or inadequate
maintenance or calibration, (b) software, interfacing, parts, or supplies not supplied by Compaq,
(c) unauthorised modification or misuse, (d) operation outside of the published environmental
specifications for the product, (e) improper site preparation, (f) unauthorised maintenance or repair,
or (g) abuse, negligence, accident, loss or damage in transit.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 5 of 18
Printed: 02/05/03 03:46 PM
TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE YOUR SOLE AND
EXCLUSIVE REMEDIES, AND NO OTHER WARRANTY OR CONDITION, WHETHER WRITTEN OR
ORAL, IS EXPRESSED OR IMPLIED. TO THE EXTENT ALLOWED BY LOCAL LAW, ANY IMPLIED
WARRANTY OR CONDITION OF SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR
PURPOSE IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY SET FORTH ABOVE.
Some countries/regions, states, or provinces do not allow limitations on the duration of an implied
warranty, so the above limitation or exclusion might not apply to you. This warranty gives you
specific legal rights and you might also have other rights that vary from country/region to
country/region, state to state, or province to province.
YOU MAY HAVE ADDITIONAL STATUTORY RIGHTS AGAINST THE SELLER BASED ON YOUR
PURCHASE AGREEMENT. THOSE RIGHTS ARE NOT IN ANY WAY AFFECTED BY THIS HP
WARRANTY.
Customer Responsibilities
You may be required to run Compaq-supplied diagnostic programs before a Hardware repair is
scheduled or a replacement part is dispatched. After the troubleshooting, if no Hardware defect is
detected, the service will be charged at Compaq’s standard rates.
You are responsible for the security of your own proprietary and confidential information and for
maintaining a procedure external to the products for reconstruction of lost or altered files, data, or
programs.
You should back up all data on your system before calling the Compaq Customer Support Centre
for repair.
In case of pickup for Compaq Repair Centre, you must remove all added accessories and package
the defective unit in the original box.
Obtaining Hardware Warranty Repair Service
For the duration of the hardware warranty, hardware repair service includes Customer-replaceable
parts and Carry-in services, as described below. To obtain hardware warranty service, you need to
call one of the referrals at one of the telephone numbers listed on the Contact Numbers page in this
guide or take your Compaq Presario to an authorised service provider. You must be prepared to
supply proof of purchase.
Customer-replaceable Parts Service
If available in your area, some customer-replaceable parts may be serviced through expedited part
shipment. Compaq will send you the relevant part along with written instructions on how to replace
the defective component. If necessary, Compaq will provide you with telephone assistance.
Defective parts and units must be returned to Compaq within 30 days. Compaq may ask for a
credit card as collateral for the more expensive parts (such as monitors) and will charge you for the
retail price of the part if the defective part or unit is not returned within 30 days.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 6 of 18
Printed: 02/05/03 03:46 PM
Carry-in Services
Hardware service during the hardware warranty period can be obtained in returning your PC to a
Compaq Presario PC authorised service provider.
Below is the name and address of the HP entity responsible for the performance of this HP
Warranty in your country/region:
United Kingdom
Hewlett-Packard Ltd.
Cain Road
Bracknell
GB-Berks RG12 1HN
Republic of Ireland
Hewlett-Packard Ireland Ltd.
30 Herbert Street
IRL-Dublin 2
ATTENTION: USE OF THE SOFTWARE IS SUBJECT TO THE COMPAQ SOFTWARE LICENSE
TERMS SET FORTH ON THE FIRST PAGE; USING THE SOFTWARE INDICATES YOUR
ACCEPTANCE OF THESE LICENSE TERMS. IF YOU DO NOT ACCEPT THESE LICENSE TERMS,
YOU MAY RETURN THE SOFTWARE FOR A FULL REFUND. IF THE SOFTWARE IS BUNDLED WITH
ANOTHER PRODUCT, YOU MAY RETURN THE ENTIRE UNUSED PRODUCT FOR A FULL REFUND.
The Compaq Software Product License Agreement will govern all Software that is provided to you
®
with the exception of Microsoft software. Microsoft products are licensed to you under the
Microsoft End User License Agreement (EULA) contained in the Microsoft documentation online.
Protect Your Investment
You can upgrade your standard factory warranty for an additional two years. For more
information, please visit our Web site at http://carepaq.emea.compaq.com or call
Compaq Support.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 7 of 18
Printed: 02/05/03 03:46 PM
Declaration of Conformity
According to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name:
Hewlett-Packard Company
Manufacturer’s Address:
10500 Ridgeview Ct.
Cupertino, CA 95015-4010
USA
declares that the product
Product Name:
Compaq Presario Personal Computer System
Model Number(s):
8000 series, S0000 series
Product Options:
All
conforms to the following Product Specifications:
Safety:
IEC 60950:1991 + A1, A2, A3, A4
EN 60950:1992 + A1, A2, A3, A4, A11
IEC 60825-1:1993 + A1/E 60825-1:1994 + A11 Class 1 (Laser/LED)
EMC:
CISPR 22:1997/EN55022:1998 Class B1)
CISPR 24:1997/EN55024:1998
IEC 61000-3-2:1995/EN61000-3-2:1995 + A14 — Harmonics
IEC 61000-3-3:1994/EN61000-3-3:1995 — Flicker
FCC Title 47 CFR, Part 15 Class B2)/ICES-003, Issue 2
AS/NZS 3548:1995 + A1 + A2:1997/CISPR 22:1993
+ A1 + A2:1996 Class B1)
Telecom:
TBR 21:1998, EG201 121:1998
Supplementary Information:
The product herewith complies with the requirements of the following Directives and carries the
CE marking accordingly.
— the R&TTE Directive 1999/5/EC
1)
The Product was tested in a typical configuration with Compaq Personal Computer and
peripherals.
2)
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Hardware Quality Engineering Manager
Cupertino, CA, USA February 2003
For Regulatory Compliance Information ONLY, contact:
European Contact:
Hewlett-Packard GmbH. HQ-TRE
Herrenberger Straße 140
D-71034 Böblingen, Germany
(FAX: + 49-7031-14-3143)
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 8 of 18
Printed: 02/05/03 03:46 PM
Operating Specifications
Electrical ratings:
Models: 8000 series, S0000 series
100–127 V/200–240 V,
4/2 A, 50/60 Hz
Operating temperature: 5° to 35° C
(On models with DVD+RW/+R drives, the
operating temperature is 5° to 30° C)
Storage temperature:
–40° to 70° C
Operating humidity:
15 to 80% @ 26° C
Storage humidity:
90% @ 65° C (non-condensing)
Operating altitude:
0–2286 m
Storage altitude:
0–4572 m
Batteries are delivered with this product. When empty, do not throw them away
but collect as small chemical waste.
Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 9 of 18
Printed: 02/05/03 03:46 PM
Regulatory and Safety Information
WARNING: The Compaq Presario is heavy; be sure to use
ergonomically correct lifting procedures when moving the computer.
WARNING: Electrostatic discharge (ESD) can damage disk drives,
add-in cards, and other components. If an ESD station is not available,
wear a wrist strap attached to a metal part of the computer. Place cards
on a conductive foam pad or inside the conductive wrapper they came
in; do not place the cards on top of the wrapper.
WARNING: Do not operate the system with the cover removed.
Always replace the cover before turning on the system.
WARNING: Please read the “Additional Safety Information” located
later in this document before installing and connecting your system to
the electrical power system.
WARNING: Using the wrong type of memory module could damage
the system.
WARNING: Do not pull the memory module out of the socket. Use the
retaining clips to eject the module.
WARNING: Do not overload the system by installing add-in cards
that draw excessive current. The system is designed to provide 2 amps
(average) of +5 V power for each board/card in the computer. The
total +5 V current draw in a fully loaded system (one with all add-in
card slots filled) must not exceed the total number of slots multiplied by
2 amps.
WARNING: Be careful of the sharp edges on the expansion slot cover.
WARNING: There is danger of an explosion if the battery is incorrectly
replaced. Replace only with the same, or equivalent, type of battery.
Discard used batteries according to the manufacturer’s instructions.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 10 of 18
Printed: 02/05/03 03:46 PM
ENERGY STAR Compliance
Compaq Presario PCs and Monitors marked with the
ENERGY STAR® logo on the packaging box qualify with
the U.S. Environmental Protection Agency’s ENERGY STAR
guidelines for energy efficiency.
Products with the ENERGY STAR label are designed to use less energy, help you
save money on utility bills, and help protect the environment.
ENERGY STAR® is a registered trademark owned by the U.S. government.
EMI Statement (European Union Only)
This is a class B product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures.
European Telephone Network Declaration
(European Union Only)
The product herewith complies with the requirements of the R&TTE Directive
1999/5/EC (Annex II) and carries the CE marking accordingly. However, due to
differences between the individual PSTNs provided in different countries/regions,
the approval does not, of itself, give an unconditional assurance of successful
operation on every PSTN network termination point. In the event of problems,
you should contact your equipment supplier in the first instance.
European Network Compatibility Declarations
(European Union Only)
This equipment has been designed to work with analogue DTMF Networks
(TBR-21 compliant).
This equipment may have internetworking difficulties in PSTN networks that only
support Pulse Dialing. Please consult with your network operator for further
assistance.
UK Compliance Information
This modem is approved by the Secretary of State at the Department of Trade and
Industry for connection to a single exchange line of the public switch telephone
network run by certain licensed public telecommunication operators or systems
connected thereto. (Direct exchange lines only, not shared service or 1-1 carrier
systems.)
This modem is also suitable for connection to Private Automatic Branch Exchanges
(PABXs) which return secondary proceed indication.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 11 of 18
Printed: 02/05/03 03:46 PM
If this modem is to be used with a PBX which returns secondary proceed
indication, no more than two pauses of four seconds duration each should be
inserted between the initial PSTN access digit and the number to be dialed.
This is to avoid interference to the PTO network.
If this modem is to be used with a PBX which has extension wiring owned by BT,
connection of the modem to the PBX can only be carried out by BT; or, by the
authorised maintainer of the PBX unless the authorised maintainer has been given
14 days written notice that the connection is to be made by another person, and
that period of notice has expired.
This modem is suitable for use only on telephone lines provided with LoopDisconnect or Multi-Frequency Dialing facilities.
Users of this modem are advised that the approval is for connection to the PSTN
via the telephone line interface supplied with it. Connection of a modem to the
PSTN by any other means will invalidate the approval.
There is no guarantee of correct working in all circumstances. Any difficulties
should be referred to your supplier.
Some network operators require that intended users of their network request
permission to connect and for the installation of an appropriate socket.
Ringer Equivalence Number
The ringer equivalence number (REN) of this modem is 1. REN is a guide to the
maximum number of apparatuses that can be simultaneously connected to one
telephone line. The REN value of each apparatus is added together, and should
not exceed 4. Unless otherwise marked, a telephone can be assumed to have a
REN value of 1.
Approved Usage
This modem is approved only for the following:
■
■
■
■
■
■
Storage of telephone numbers for retrieval by a predetermined code
Detection of initial proceed indication
Automatic calling/Automatic answering
Tone detection
Operation in the absence as a secondary proceed indication
Loudspeaking facility
This modem is NOT suitable for use as an extension to a payphone.
This modem is not approved for connection to UK private speechband services.
This modem does not support the automatic redial function.
Any other usage will invalidate the approval of your modem, if, as a result, it then
ceases to conform to the standards against which approval was granted.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 12 of 18
Printed: 02/05/03 03:46 PM
The approval of this modem is INVALIDATED if the apparatus is subject to
modification in any material way not authorised by the BABT or if it is used with
or connected to external software that has not been formally accepted by BABT.
Storage of Numbers
It is advisable to check the telephone numbers stored in your modem immediately
after programming.
In order to prevent the misdirection of class and network interference, please
ensure that all manually programmed telephone numbers are correctly entered.
The number you enter to dial may optionally contain a PAUSE character
(a comma) to allow this modem to operate with a PABX. Each comma gives
a two-second delay.
WARNING: When using this device, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury
to persons, including the following:
■
■
■
■
■
■
Do not use this product near water, for example, near a bathtub,
wash bowl, kitchen sink or laundry tub, in a wet basement, or near
a swimming pool.
Avoid using this product during an electrical storm. There may be a
remote risk of electric shock from lightning.
Do not use this product to report a gas leak in the vicinity of the leak.
Always disconnect the modem cable before opening the equipment
enclosure or touching an uninsulated modem cable, plug, socket, or
internal components.
If this product was not provided with a telephone cable, use only
No. 26 AWG or larger telecommunication cable in order to reduce
the risk of fire.
Do not plug a modem or telephone cable into the Network Interface
Card (NIC) receptacle.
SAVE THESE INSTRUCTIONS
Additional Safety Information
This product has not been evaluated for connection to an “IT” power system
(an AC distribution system with no direct connection to earth, according to
IEC 60950).
AC Power Safety Warning
Proper Electrical Connection (Norway and Sweden only)
Advarsel: Apparatet må kun tilkoples jordet stikkontakt.
Varning! Apparaten skall anslutas till jordat uttag när den ansluts
till ett nätverk.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 13 of 18
Printed: 02/05/03 03:46 PM
WARNING: Install the computer near an AC outlet. The AC power
cable is your Compaq Presario’s main AC disconnecting device and
must be easily accessible at all times. For your safety, the power cable
provided with your system has a grounded plug. Always use the power
cable with a properly grounded wall outlet, to avoid the risk of electrical
shock.
WARNING: Your system is provided with a voltage select switch for
use in a 115 or 230 VAC power system. The voltage select switch
has been pre-set to the correct voltage setting for use in the particular
country/region where it was initially sold. Changing the voltage select
switch to the incorrect position can damage your PC and void any
implied warranty.
WARNING: To reduce the possibility of an electric shock from the
telephone network, plug your computer into the AC outlet before
connecting it to the telephone line. Also, disconnect the telephone
line before unplugging your computer from the AC power outlet.
WARNING: Always disconnect the modem cable from the telephone
system before installing or removing your computer cover.
WARNING: Do not operate the computer with the cover removed.
WARNING: The power supply is not user-serviceable. To prevent
damage to the power supply, have a qualified person repair or replace
it. All other components are user-serviceable.
WARNING: For your safety, always unplug the system from its power
source and from any telecommunications systems (such as phone lines),
networks, or modems before performing any of the procedures
described in this guide. Failure to do so may result in personal injury
or equipment damage. Hazardous voltage levels are inside the power
supply and modem of this product.
Lithium Battery Caution
WARNING: The PC uses a lithium battery, type CR2032. There
is danger of an explosion if the battery is incorrectly replaced.
Replace only with the same, or equivalent, type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 14 of 18
Printed: 02/05/03 03:46 PM
Laser Safety Statement
Class 1 LED Product
The CD-ROM and DVD-ROM drives contain a laser system and are classified as a
“Class 1 Laser Product” under a U.S. Department of Health and Human Services
(DHHS) Radiation Performance standard according to the Radiation Control for
Health and Safety Act of 1968.
Should the unit ever require maintenance, contact an authorised service location.
WARNING: Use of controls, adjustments, or performance procedures
other than those specified in the Getting Started guide may result in
hazardous radiation exposure. To prevent direct exposure to laser
beam, do not try to open the enclosure of the CD-ROM or DVD-ROM.
Laser Product Label
The following label or equivalent is located on the surface of Compaq laser
products:
This label indicates that the product
is classified as a CLASS 1 LASER
PRODUCT. This label appears on a
laser device installed in your product.
TV Antenna Connectors Protection
External Television Antenna Grounding
If an outside antenna or cable system is connected to the product, be sure
the antenna or cable system is electrically grounded so as to provide some
protection against voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with regard to
proper electrical grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna-discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
Lightning Protection
For added protection of any Compaq product during a lightning storm, or when it
is left unattended and unused for long periods of time, unplug the product from the
wall outlet and disconnect the antenna or cable system. This will prevent damage
to the product from lightning and power line surges.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 15 of 18
Printed: 02/05/03 03:46 PM
7
6
5
4
1
3
2
Antenna Grounding
Reference
Antenna Grounding
Grounding Component
1
Electric Service Equipment
2
Power Service Grounding Electrode System
(NEC Art 250, Part H)
3
Ground Clamps
4
Grounding Conductors (NEC Section 810-21)
5
Antenna Discharge Unit (NEC Section 810-20)
6
Ground Clamp
7
Antenna Lead in Wire
Power Lines
An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into
such power lines or circuits.
WARNING: When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as
contact with them could be fatal.
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 16 of 18
Printed: 02/05/03 03:46 PM
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 17 of 18
Printed: 02/05/03 03:46 PM
Filename: sb38082K.doc
Title: HP-Print2k.dot
Template: HP-Print2K-Compaq_Vertical.dot
Author: anns
Last Saved By: JimL
Revision #: 17
Page: 18 of 18
Printed: 02/05/03 03:46 PM