Smart-UPS SC
APC Smart-UPS SC 1000VA 120V - 2U
Rackmount/Tower
APC Smart-UPS SC, 600 Watts / 1000
VA,Input 120V / Output 120V, Rack Height 2 U
Includes: CD with software, Documentation CD,
Rack Mounting brackets, Smart UPS signalling
RS-232 cable, USB cable, User Manual
Standard Lead Time: Usually in Stock
SC1000 Features
USB Connectivity
Provides management of the UPS via a USB port (not available on all
models).
Protects the initial investment in the UPS when migrating from tower to rackmount environment.
Allows for standardization on one product for use in different environments.
Rack/Tower
convertible
Multiple mounting
methods
Front-access servicing Simplifies installation and maintenance while minimizing space
requirements.
Smart-UPS SC Features & Benefits
Manageability
Network manageable Provides remote management of the UPS over the network.
Audible Alarms
Actively let you know if the unit is on battery, if the battery is low or if there
is an overload condition.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be
replaced.
Battery failure
Provides early-warning fault analysis on batteries enabling timely preventive
notification
maintenance
Serial Connectivity
Provides management of the UPS via a serial port.
LED status indicators Quickly understand unit and power status with visual indicators.
InfraStruXure
Enables centralized management via the APC InfraStruXure® Manager.
Manager Compatible
Economy
Boost and Trim
Automatic Voltage
Regulation (AVR)
Adjustable voltagetransfer points
Safety-agency
approved
Gives higher application availability by correcting low and high voltage
conditions without using the battery.
Maximizes useful battery life by widening the input voltage window or
tightening the output voltage regulation.
Ensures the product has been tested and approved to work safely with the
connected service provider equipment and within the specified environment.
UL, FCC, CE, C-Tick approvals.
Availability
Dataline Surge
Protection
Power conditioning
Intelligent Battery
Management
Automatic restart of
loads after UPS
shutdown
Cold-start capable
Hot-swappable
batteries
Resettable circuit
breakers
Provides protection of connected equipment from power surges on the data
lines.
Protects connected loads from surges, spikes, lightning, and other power
disturbances.
Maximizes battery performance, life, and reliability through intelligent,
precision charging.
Automatically starts up the connected equipment upon the return of utility
power.
Provides temporary battery power when the utility power is out.
Ensures clean, uninterrupted power to protected equipment while batteries
are being replaced
Enables a quick recovery from overload events.
Output
Output Power Capacity
600 Watts / 1000 VA
Max Configurable Power
600 Watts / 1000 VA
Nominal Output Voltage
120V
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
Crest Factor
up to 5 : 1
Waveform Type
Stepped approximation to a sinewave
Output Connections
(6) NEMA 5-15R
Input
Nominal Input Voltage
120V
Input Frequency
47 - 63 Hz
Input Connections
NEMA 5-15P
Cord Length
1.83 meters
Input voltage range for main
operations
95 - 142V
Input voltage adjustable range for 87 - 152V
mains operation
Batteries & Runtime
Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
8 hour(s)
Replacement Battery
RBC33
RBC™ Quantity
1
Typical Backup Time
at Half Load
19.7 minutes (300 Watts)
Typical Backup Time
at Full Load
7.4 minutes (600 Watts)
Runtime Chart
Smart-UPS SC
Energy Use/Efficiency
Curve fit to measured efficiency data. All measurements taken in
normal operating mode, at typical environmental conditions, with
nominal electrical input and resistive load output.
View Enlarged Chart
Communications & Management
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload
indicators
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone
alarm
Surge Protection and Filtering
Surge energy rating
445 Joules
Filtering
Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping
response time : meets UL 1449
Data Line Protection
RJ-45 Modem/Fax/DSL/10-100 Base-T protection
Physical
Maximum Height
89.00 mm
Maximum Width
432.00 mm
Maximum Depth
463.00 mm
Rack Height
2U
Net Weight
16.36 KG
Shipping Weight
19.55 KG
Shipping Height
254.00 mm
Shipping Width
610.00 mm
Shipping Depth
610.00 mm
Master Carton Units
1.00
Color
Grey
Units per Pallet
10.00
Environmental
Operating Environment
0 - 40 °C
Operating Relative Humidity
0%
Operating Elevation
0-3000 meters
Storage Temperature
-5 - 45 °C
Storage Relative Humidity
0%
Storage Elevation
0-15000 meters
Audible noise at 1 meter from
surface of unit
45.00 dBA
Online Thermal Dissipation
180.00 BTU/hr
Conformance
Regulatory Approvals
CSA,FCC Part 15 Class A,UL Listed
Standard Warranty
2 years repair or replace
**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full
load rating of the UPS.