. -......_-.®
Model ZS5300 User Guide
Multi Zone Selector
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU'AU FOND.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (Cable-TV) system installer's attention to Section 820-40 of the NEC which
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict
quality and safety standards. There are, however, some
installation and operation precautions which you should be
particularly aware of.
1. Read Instructions - All the safety and operating instructions
should be read before the product is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the product and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
6. Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near waterfor example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.
8. Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product should
follow the manufacturer's instructions, and should use a
mounting accessory recommended by the manufacturer.
13.Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
the point where they exit from the product.
14.Protective Attachment Plug - The product is eqUipped
with an attachment plug having overload protection. This is
a safety feature. See Instruction Manual for replacement or
resetting of protective device. If replacement of the plug is
required, be sure the service technician has used a
replacement plug specified by the manufacturer that has
the same overload protection as the original plug.
15.0utdoor Antenna Grounding - If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. See Figure 1.
Figure 1
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSIINFPA 70
9. A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
10.Ventilatlon - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the product
and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer's instructions
have been adhered to.
11.Power Sources - This product should be operated only
from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
12.Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug (a
plug having one blade wider than the other). This plug will fit
into the power outlet only one way. This is a safety feature.
If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
ANTENNA
LEAD IN WIRE
GROUND CLAMPS '-:::'~Ofi":....
_ _ _ POWER SERVICE GROUNDING
~
ELECTRODE SYSTEM (NEC
ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numerique de la Classe Best
conforme la norme NMB-003 du Canada.
a
16.Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
17.Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
18.0verloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
19.0bject and liqUid Entry - Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the
product.
20.Servicing - Do not attempt to service this product yourself
as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
21.Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or damaged in any way, and
f. When the product exhibits a distinct change in performance
- this indicates a need for service.
22.Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
.hazards.
23.Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
24.Wall or Ceiling Mounting - The product should be mounted
to a wall or ceiling only as recommended by the manufacturer.
25.Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
26.Apparatus shall not be exposed to dripping and splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Table of Contents
Introduction
Features
About the keypad
Accessories
Functional Overview
2
2
3
3
4
Front panel
Rear panel
Remote control unit (RC5300ZS)
4
5
6
ID Code Setup
Preparation and Connection
8
Connecting speakers
Connection example
9
9
10
Operation Examples...................••.•.....•......... 15
Remote Code List
16
Troubleshooting
17
Care and Maintenance
17
Specification
18
1
Introduction
Features
Thank you for purchasing the Marantz ZS5300 Multi
Zone Selector Amplifier.
This remarkable component has been engineered to
provide you with many years of whole house audio
enjoyment.
Please take a few minutes to read this manual
thoroughly before you connect and operate the
ZS5300.
As there are a number of connection and
configurations options, you are encouraged to
discuss your own particular multi zone setup with
your Marantz AN specialist dealer.
ZS5300 is a 2ch x 3 zones amplifier with Multi-Zonel
Source selector.
• All channels identically designed, complete
discrete construction class-O power amplifier.
To maximize sound performance, a large R-core
power transformer is used.
The power amplifier is designed using discrete,
c1ass-D amplifier construction for all 6 channels.
This assures that the channels are the same
quality and power.
• 3 zone control function
Combining this unit and a keypad, you can
construct a multi-zone system which can control
up to 3 zones.
• 10 selector switch which allows for zone
expansion
This unit can be connected in cascade by changing
the ID switch on the rear panel. Up to 3 units can
be connected so the zone system can be
expanded up to 9 zones.
• Power save function by independent power
control
This unit can control the power onloff for each
zone. The power for the un-used zone can be
turned off for power saving capability.
• Party mode
You can direct the same source to all the zones
simultaneously. This is terrific for events like
entertaining. In addition you can control volume
and muting capability.
• Banana plug compatible speaker terminal
The speaker terminals can be connected with
banana plugs directly as well as traditional
speaker cable.
2
I About. the keypad ...
You can connect the majority of keypads, IR receivers
as well as some control related products available in
the market.
Accessories
• AC power cord x 1
These are examples of systems that have been tested
by Marantz America:
.:. NILES
Keypad
IR Main System unit
IR Sensor
IR Flasher
: IntelliPad
: IRP6+
:MS2
: IRC-2
• Remote control unit x 1
_NILES®
The Niles logo and IntelliPad are registered trademark
of Niles Audio Corporation.
•:. XANTECH
Keypad
Connecting block
IR Sensor
IR Emitter
:SMARTPAD3
: 789-44
: 480-30 Series
: 282M
xantl!l:h.
The Xantech logo and SMARTPAD3 are registered
trademark of Xantech Corporation.
Note:
If you wish to use products that are not listed above,
please contact your authorized Marantz dealer for
possible compatibility issues.
• AA-size batteries x 2
3
Functional Overview
I Front panel
5
6
4
~~""'''.roHE5B.ECTORI~
o
~II--~I
1
2
CD Main power switch (POWER ON I STANDBY)
Press this button to turn the main power on. Press again
to turn it off. When the main power is turned on, Zonei,
Zone2 and Zone3 turn into standby mode and power for
each zone can be switched with the remote control unit
RC5300ZS (provided) or a Keypad (option). For regular
use, please leave the unit powered on.
® Volume level indicator (LEVEL)
These indicators show the level of the volume. When all
the indicators light up, the volume is at the maximum level.
When all the indicators lights are off, the volume is at the
minimum level. Volume can be adjusted individually from
each of Zonei, Zone2 and Zone3. Volume adjustment can
be adjusted, with the remote control unit or a Keypad.
Mute indicator (MUTE)
These indicators flash when the sound is muted. When
volume is at the maximum, all the indicators flash. When
the volume is at the minimum, only the first indicator
flashes. Mute can be controlled individually from each of
Zonei, Zone2 and Zone3. Muting can be done with the
remote control unit or a Keypad. If the volume is adjusted
when muted, mute is released.
Caution
When these indicators are flashing, no sound is outputted.
When releasing mute, please check the volume position. If
volume is set too loud, the speakers may be damaged.
4
3
@ Standby indicator (STANDBY)
This indicator lights up when any of the zones are in
standby. Zone 1, Zone2 and Zone3 can be in standby
mode independently. Power for each zone can be
controlled with the remote control unit or a Keypad.
@) Direct indicator (DIRECT)
When the "Zone Direct" input is chosen for the source, this
indicator lights up. The source connected to the "Zone
Direct" terminal for Zonei can be selected only for Zonei.
The same applies for Zone2 and Zone3. Source selection
can be selected with the remote control unit or a Keypad.
@ Input-indicator (INPUT)
Depending on which input is selected in each zone, the
appropriate INPUT indicator will be illuminated. The Inputs
can be selected by a remote control unit or a Keypad.
® IR (Remote contrOl) sensor
This window receives infrared signals from the remote
control unit.
IR~ar panel
rn Audio input terminal (AUDIO IN)
Connect the analog audio output from your audio device
(CD player, TV, DVD player, etc.). Up to 3 audio devices
can be connected.
rn Audio output terminal (AUDIO OUT)
These terminals are designed as an Audio pass through.
They can be used to when cascading one or two other
ZS5300s. Another example might be to share source
components with a dedicated home theater system etc.
rn Zone direct input terminal (ZONE DIRECT IN)
These terminals are only for their corresponding zone.
Connect the analog audio output terminals from your audio
device (CD player, TV, DVD player, etc.). Although up to 3
devices can be connected each to a different zone, the
device connected to "ZONE DIRECT 1" can be played
only in ZONE 1. The same applies to ZONE DIRECT 2
and ZONE DIRECT 3.
• You can construct a powerful & unique multi-zone
system by connecting the Marantz music server
(DH9300). (1& P. 13)
[!] Zone 3 pre output terminal (ZONE 3 PRE OUT)
These terminals are preamplifier output terminals for
Zone 3. These terminals can be connected with other
audio devices such as an external amplifier.
I]] Remote control input I output terminal
(REMOTE CONTROL)
By connecting this unit to another Marantz audio component
using a System control cable, you can remotely operate the
components as a single system.
00 Speaker output terminal (SPEAKERS)
Connect speakers for each zone.
• Rating of speaker impedance: 6 ohm
mStatus output terminal (STATUS OUT)
These terminals are DC trigger output terminals to
determine whether power of a zone is on or off.
Connect these terminals to Keypads, etc.
• Rating of status output: 12V 100mA.
II] Flasher input terminal (FLASHER IN)
This terminal is to control the unit from each zone. Connect
the control signal from a Keypad, etc.
[!] Remote control internal I external switch
(INT. I EXT.)
This switch is to select if the remote sensor on the front
panel work or not. If you use two or more ZS5300s in
cascade connection, set this switch at INT. for the ZS5300
that functions as the maser. Set the switch at EXT. for the
slave ZS5300s.
INT. : Enable the remote sensor.
EXT. : Disable the remote sensor.
[Q] 10 select switch (10 SELECTOR)
When two or three ZS5300s are used, set independent ID
numbers for each. Up to 3 ZS5300s can be connected.
Different ID numbers must be set for each unit.
Illl Voltage selector (VOLTAGE SELECTOR)
Select the power voltage of your location. You can select
115Vor230V.
• Be sure to disconnect the power cord when changing
this switch.
IJlI Power inlet (AC IN)
Plug the power cord into this socket.
CAUTION:
Be sure to use the power cord rating more than 2.5A, 250V
and 18AWG when operating 230V AC voltage.
5
IRemote control unit (RC5300ZS)
8
DIRECT POWER button
You can control power for each zone independently with
these buttons.
• ZONE 1 DIRECT ON button
Turn the power on for Zone 1 independently.
• ZONE 1 DIRECT OFF button
Turn the power off for Zone 1 independently.
• ZONE 2 DIRECT ON button
Turn the power on for Zone 2 independently.
• ZONE 2 DIRECT OFF button
Turn the power off for Zone 2 independently.
• ZONE 3 DIRECT ON button
Turn the power on for Zone 3 independently.
• ZONE 3 DIRECT OFF button
Turn the power off for Zone 3 independently
•
Buttons for ZONE 1, 2, 3
The descriptions below are common. The button's
functions are the same for Zone 2 and 3; so only the
buttons for Zone 1 described.
• ZONE 1 DIRECT button
Select the "Zone Direct" input for Zone 1.
• ZONE 1 INPUT 1, 2, 3 buttons
Select the "Input 1" or "Input 2" or "Input 3" for
Zone 1.
• ZONE 1 ON I OFF button
Turn the power on/off for Zone 1.
Press once to turn on, press again to turn off.
• ZONE 1 MUTE button
o GLOBAL CONTROL buttons
Turn the mute on/off for Zone 1.
Press once to turn on, press again to turn off.
It volume is adjusted when muted, mute is
turned off.
With these buttons you can control volume, source
selection, etc. for all the zones at the same time. If two or
three units are connected in cascade, all the zones can
be controlled at the same time as well.
• ZONE 1 VOLUME button
Control the volume up/down for Zone 1.
• GLOBAL DIRECT button
This enables you to select the Zone Direct input
(dedicated to that zone) to be played in all
zones 1, 2, & 3 of all connected ZS5300s.
• GLOBAL INPUT 1, 2, 3 button
This enables you to select the Input 1,2,or 3 to
be played globally with all connected ZS5300s.
• GLOBAL ON I OFF button
This enables you to turn the power on/off for the
all zones of all connected ZS5300s. Press once
to turn on, press again to turn off.
• GLOBAL MUTE button
This enables you to turn the mute on/off for all
connected ZS5300s. Press once to turn mute
on, press again to turn mute off.
• GLOBAL VOLUME button
This enables you to control the volume up/down
for all the connected ZS5300s.
• GLOBAL ON button
This enables you to turn the power on for the all
zones of all connected ZS5300s.
• GLOBAL OFF button
This enables you to turn the power off for the all
zones of all connected ZS5300s.
6
•
ID setting button
When two or three ZS5300s are connected remote cable
together or used in same area, this allows the setting of
different ID numbers.
See "ID Code Setup" for setting ID code for the remote
control unit. (~ P. 8)
Default setting the unit is ID-1.
.:. Using the remote control unit
1. Remote control
Operate the remote control unit (RC5300ZS) within a
distance of approximately 16 feet (5m) from the IR
(remote control) window on the front of the unit.
If the transmitter is pointed to a direction other than
the IR SENSOR or if there is an obstacle between
them, remote control may not be possible.
2. Loading batteries
Batteries in this remote control unit have a life of
approximately 1 year under normal operating
conditions. When the remote control unit is not to
being used for an extended period of time, remove
the batteries. Also, when you notice that the batteries
are starting to run down, replace them as soon as
possible.
1. Remove the battery cover
• Remote control operating range
~
•
. ~~~
Remote control unit
ZS5300
~
Note:
• Do not use the rechargeable batteries(Ni-Cd type).
2. Insert the AA size batteries with correct (+) and
(-) polarity. .
3. Close the battery cover until it clicks.
7
/0 Code Setup
.:. Setting 10 code
Ex.) Set to 10-1
Remote control unit
Rear panel of the unit
,
I
@
flDlOT'e COHTl'IOl.
:)
"
@w
SP,
ID
SELECTOR
@©2.~
is
ZONE'
-I
R
@
-
0
0
,
@
1-
@
Press and hold SET, then
Press 10-1 and release both.
Set to "1",
The ZS5300 system can be expanded up to 3 units.
When using 1 unit alone, set the 10 switch on the rear panel to "1",
To set the remote control unit to the 10 number of the unit, follow the procedure below.
1. Press the SET button and hold it, then press the 10-1 button, then release both buttons.
2. This remote control unit has been set as 10-1. To set the 10 to 2 and 3, follow the same procedure.
3. When the batteries are replaced, the unit defaults to the factory setting of 10-1 .
Note:
This is important, because if you have changed 10 numbers, you will have to reset the 10 number when the
batteries are replaced.
*Oefault setting for both the remote control unit and the unit is 10-1
8
Preparation and Connection
.:. Before making connections
Be sure to turn the power off for the ZS5300 and other products to be connected to ZS5300 before making
connections.
Please refer the instruction manuals for other products to make sure of the proper connections and terminals.
•:. Keypad
The keypads that can be connected to the unit are keypads and connecting boxes made by NILES and XANTECH
shown below. If you want to use products that are not in the list below or made by other manufacturers, please
contact your authorized Marantz dealer.
• NILES
Keypad
IR Main System unit
IR Sensor
IR Flasher
: IntelliPad
: IRP6+
: MS2
: IRC-2
·XANTECH
Keypad
Connecting block
IR Sensor
IR Emitter
: SMARTPAD3
: 789-44
: 480-30 Series
: 282M
Note:
When connecting a Keypad, refer to the instruction manual for the Keypad as well as for this unit.
I Connecting speakers
There are 2 ways to connect speakers. See the
pictures below.
.:. Connecting speaker wire
1. Strip away approx..6/8 inch (20 mm) of wire
insulation.
.:. Connecting banana plug
Banana plug connections are also possible.
(ob~
~I
Approx. 6/8 inch
(20mm)
2. Twist the bared wire ends tight to prevent short
circuits.
~~O~ +,§sssssssss~
3. Insert the bare part of the wire into the hole in the
each terminal as follow.
9
I
Connection example
.:. NILES system
Remote
Status
Analog
Speaker
To cascade connection
IR Data
Flasher
ZS5300
:
I
, .. - - - - -
----------------
---.. ~~l~~:::;.========:'l
:
~~!~!~!~I~lwg
,,
®
,
··,
·
··,
12v ~0 ~I~
~ ~1i2 ~ ~1i2 ~ ~112 ~ ~112 ~ ~
T V 0 T V 0 T V 0 T V 0 T V 0 T
A
A
A
A
A
A
Set8JR INPUTS - - - - - - - '
_NILES
MODB.
IAP6+
r
flASHER lEVEL---,
IR
::11~::~::~~
:
l\ __
~~
_
- - - ..
' : - - - - - - - - - - - - - - - - -......
I:'r:::: - - - - - - - -='"
o
~~
~~ ~~--~­
.r~~K _~LES
DC power supply
plugged into an
unswitched AC outlet.
···
·
I
~--------------------------------------,
l_
.r
I,
I,
l_
(- -
"~L1FIER
INPUT
I @ Analog
@ out
,,
,,
CD Player
- T.!> In Remote
--.!> Out
MARANTZ
II@Analog
• out
--.!> In
_.L.!> Out Remote
DVD Player
MARANTZ
Tuner
MARANTZ
~
4
,
l,-:,,:-:."":".-~':'".
~
Si+~_.~
(~
··,,,
,
·,
:"'1
":~~ER
: IR Flasher
.I. ~/
.......
"!!LAY
STA_
I'IIDIIACK
"NILES
~ --::=:--
~
'6~:~
I.~i;n 1.1...
I~~~~II~~~~I 1~'~
~~
: IRC-2
•• " - • ,
••••••
HH
__
.,,~
......
,.~/
MS-2 IR Sensor in
a remote location
{@
@}
Zone-3
HOD Player
MARANTZ
10
MS·2 IR Sensor in
a remote location
· ... -._:-:.-.-.-.-..-.-.-.**':.
{@@}
'···i······
. ··
Zone-2
I
·
---~------------"
,
·
!~6---0""A"'\.O
·
,
3
~~ 11~i;nl ~
~~,~,~
I
,
,
,
,,
,
,
,
,
,,
,
,,
:
2
~
~~~~
:
Analog @ @ @
out @ @ @
o
.:. XANTECH system
Remote
Status
Analog
Speaker
To cascade connection
IR Data
Flasher
Z85300
-----;- ------6'l
a
c:
I
PM110
SMART PAD!"
PROGRAMMABLE MODULE
789-44
CONNECTING BLOCK
0
0
:::>
.
>
N
0
...
t:c
Q
.
··· ..
..
·, .
IR
RCVR
___ L __
0
I,
,
l
_-----_
, , ..
t
I
--..,.,-'-..u
l
z
t3~g;
I
I,
I
;.,~
I'
0
, , - - - ... - - - - - - - - - - - - - - - - - - - - ,
~--------------------------
DC power supply
plugged into an
unswitched AC outlet.
1@Analog
, @ out
--:!) In
- L:!) Out Remote
.
···
·
···,,
··
··,,
··
··
out
DVD Player
Remote
,
... .. -
~
~
MARANTZ
Tuner
Analog @ @ @
out@@@
2 3 4
@
@
White stripe
'\
...
~~~ ..~_
lit
.............. GND I
':
7-1001 ribbon cabte with - '
' m i n i plug removed
fi
\
:
,
~'7-- --- ------- -Zo~e-1
Speaker
L
R
PM110
SMART PAD!"
PROGRAMMABLE MODULE
------------...-------'j---------..
,
Speaker
~o'I
LR
PM110
SMART PAD!"
PROGRAMMABLE MODULE
MARANTZ
480-30
series
IR Receivers
--------------""'\_--------.
a
I,
I,
I,
I,
OUTPUT
t--_oo
c_ioil
:!,
I
I·
INPUT
~~
·'--T----.,
CD Player
MARANTZ
I @ Analog
(: _: I~ ~ut
~~~!~:~
~~l~,
L'~;~RR+ L'~":~RR. 1..~_.?_~~.. 1
U)
0
,r
'
0
0
l
i
Speaker
L
R
~
l
~!
HOD Player
MARANTZ
11
.:. Cascade connection
Note:
To change the positions of the EXT./INT. switch and the ID switch, turn off the main power switch of the ZS5300.
When the main power switch is on, changing the positions do not affect.
ZS5300 (Master)
ZS5300 (Slave)
Set to EXT
EXT. INT.
123
~
00
~
+
"CD Player
MARANTZ
'---'
"DVD Player
MARANTZ
'---'
"-
~
Analog
'@ out
Tuner
MARANTZ
'---'
! /~----·I----~"!l
HOD Player
-- -T~
MARANTZ
1
Analog
1
out
@
@
@
@
@
@
2
3
4
Remote
""--'
12
'---'
- - - Remote
--Analog
Set to 2
.:. Connection with the DH9300
Z85300
["=,-;,-='-1"·;~
!~1:j~I~
~~
- - - Remote
--Analog
- - Speaker
- - - - - - - Video
o
Zone-1
Speaker
Zone-2
,-----------------------------,
TV
Zone-3
Speaker
,,-----------------~-----------------------------,
l
_ _ j -.J
I
_ _ _
DH9300
-':"-_-~-_-:':""-
I
: ::
~..;..;:;..,,;:....::..;;'-----------:-:-:
I
•
f
0' '0 ~.;~,;~.;
~ ~
o'
'0
()JT
ovr
rn ~
1
OUT'
.
- - - - - - -......
1II11Oft101
@. @. @,
@j @j @j @. @. @,
__
~,,2
. -"'' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' -- -
,--------------,
@ ,@
0lIf'
0lIl,
@) @
0lII'
@,
@.@ @ @ @.
1oNAL.Ol'~
-~---_r_---------I-
-I-----------.,r-------r-./
13
.:. Connecting external power amplifier
When using speakers which might need high power to drive (ex. some outdoor speakers), you might need more
power than the ZS5300 can provide. If you need more power, you can connect the "ZONE 3 PRE OUT" to an
external power amplifier.
Sound level can be adjusted with Volume Up/Down on ZS5300.
I
Power amplifier
,---+.....,@@
@=
Power amplifier
@-:
@
@-
@=
-~.
Z85300
MA61 00
Outdoor speaker
.:. Connecting power cord
When all the connections are made, plug the power
cord into the power outlet.
.:. Setup
This is an example to construct 3-zone system with a
NILES keypad.
See the picture Connection Example "NILES system"
(~P. 10).
When all the connections are made, teach the
keypad the remote commands.
To teach the commands to the keypad or more
information, please refer to the instruction manual of
your keypads.
14
MA6100
Outdoor speaker
Operation Examples
.:. Refer to connection example "NILES system II
Main room -
(~
P.10)
. _ _ - - - - - - - - - - - - - ZONE 1
1.
1.
2.
light up
---
o
o
0
.----.0
,
t
3
•
5
•
~~----'
~.
"@
J)
6.
light up
-I
1.
3.
4.
light up
flash
1. 6. 4.
1. Press the CD button on the keypad.
The power of ZS5300's Zone 1 is turned on and
the input source is switched to Input 3.
Pressing the POWER button on the keypad also
turns on the power.
2. Press the PLAY button on the keypad.
CD player begins to play.
3. Press the VOLUME'" button on the keypad.
The volume level of ZS5300's Zone 1 is
increased.
Also pressing the VOLUME" button decreases
the volume level.
4. Press the MUTE button on the keypad to mute the
sound.
The volume level indicators of ZS5300's Zone 1
flashes.
To release the mute, press the MUTE button
again or press the VOLUME'" or ...
5. Press the STOP button on the keypad.
The CD player stops.
6. Press the POWER button on the keypad.
The power of ZS5300's Zone 1 is turned off and
the STANDBY indicator lights up.
15
Remote Code List
.:. Remote code list (RC-S extension)
Power ON/OFF
Power ON
Power OFF
Volume up
Volume down
Mute
INPUT 1
INPUT 2
INPUT 3
Direct in
Power ON/OFF
Power ON
Power OFF
INPUT 1
INPUT 2
INPUT 3
Direct in
Mute ON/OFF
Volume up
Volume down
Power ON/OFF
Power ON
Power OFF
INPUT 1
INPUT 2
INPUT 3
Direct in
Mute ON/OFF
Volume up
Volume down
Power ON/OFF
Power ON
Power OFF
INPUT 1
INPUT 2
INPUT 3
Direct in
Mute ON/OFF
Volume up
Volume down
Set
ID-1
ID-2
ID-3
161210
161211
161212
161600
161700
161319
160039
160049
160059
160060
161220
161221
161222
160030
160031
160032
160017
161310
161610
161710
161230
161231
161232
160040
160041
160042
160024
161311
161611
161711
161240
161241
161242
160050
160051
160052
160027
161312
161612
161712
161210
161211
161212
161600
161700
161319
160039
160049
160059
160060
161223
161224
161225
160033
160034
160035
160018
161313
161613
161713
161233
161234
161235
160043
160044
160045
160025
161314
161614
161714
161243
161244
161245
160053
160054
160055
160028
161315
161615
161715
161210
161211
161212
161600
161700
161319
160039
160049
160059
160060
161226
161227
161228
160036
160037
160038
160019
161316
161616
161716
161236
161237
161238
160046
160047
160048
160026
161317
161617
161717
161246
161247
161248
160056
160057
160058
160029
161318
161618
161718
Global control
Global control
Global control
Global control
Global control
Global control
Global control
Global control
Global control
Global control
code
code
code
code
code
code
code
code
code
code
ID initial: ID-1
ID setting: Push and hold SET first and 10-* buttons next simultaneously. (*=1 or 2 or 3)
16
Troubleshooting
In case of trouble with the unit, first check the following before calling for service.
1. Are all the connections made properly?
2. Are you operating the unit properly by following user's guide?
3. Are the other products working properly?
If the unit still does not work properly, check the items shown in the following table.
If your trouble cannot be solved with the remedy actions listed in the following table, malfunction of the internal
circuitry is suspected; immediately unplug the AC power cord and contact a Marantz authorized dealer or service
center.
Problem
Remedy
The amplifier does not work and the indicator
does not light up.
• Check if the power cord is plugged properly into an
AC power outlet.
The indicator lights up but the amplifier will
not function.
• Check the settings of the INPUT SELECTOR,
VOLUME control.
• Check if the MUTE function is de-activated.
(The MUTE indicator is OFF.)
Sound is produced only from one of the
speaker systems.
• Turn the power off and change the connections of
the left and right speaker systems. If sound still
does not come out from the same speaker system,
check the connection cords or the speaker system
itself.
Sound is not produced at all.
• Check the settings of the INPUT SELECTOR.
• Check that the speaker cords are connected
properly.
• Check that the connection cords with RCA pin
plugs are connected properly.
Doesn't work properly when it is connected to
Cascade.
• Check the ID switch of the rear panel is set
properly.
• Check the ID setting of the remote controller is set
properly.
Care and Maintenance
This section describes the care and maintenance
tasks that must be performed to optimize the
operation of your Marantz equipment.
.:. Cleaning of the external surfaves of the
unit
The exterior finish of your unit will last indefinitely
with proper care and cleaning.
Never use scouring pads, steel wool, scouring
powders or harsh chemical agents, alcohol, thinners,
benzene, insecticide or other volatile substances as
these will mar the finish of the equipment.
Likewise, never use cloths containing chemical
substances. If the unit gets dirty, wipe the external
surfaces with a soft, lint-free cloth:
17
, Specification
Rated power output
Zone1 UR (40Hz -20KHz)
Zone2 UR (40Hz -20KHz)
Zone3 UR (40Hz -20KHz)
THD (40Hz - 20KHz)
Input sensitivity
Input impedance
Frequency response (-1 dB)
Signal to noise ratio
Power requirement
Power consumption
'"
60W 6-ohm / Channel
60W 6-ohm / Channel
60W 6-ohm / Channel
0.05% 6-ohm
300mV / 60W Output
20K ohms
10Hz to 30KHz
85dB
115V / 230V AC 50/60Hz
100W
Dimensions (Maximum)
Width
Height
Depth
Weight
17.32 inches (440 mm)
4.53 inches (115 mm)
13.31 inches (338 mm)
18.74 Ibs (8.5 Kg)
Accessories
AC power cord
Remote control unit (RC5300ZS)
AA-size batteries
Design and specifications are subject to change without notice.
18
1
1
2
www.marantz.com
You, can find your nearest authorized distributor or dealer on our website.
. . . . .. . . . . . . ]I[
Printed in Japan
@
is a registered trademark.
01/2008
00M02AJ851254
mzh-g
For U.S.A.
lDapantz®
Limited Warranty
Marantz America, Inc. ("Marantz") warrants the following Marantz
Products for the periods indicated:
Who may enforce the warranty
This warranty may be enforced only by the original purchaser.
1. The following Marantz Audio/Video components, have a 3
year warranty for both Parts & Labor, from the original purchase date:
Amplifiers, Pre Amplifiers, Pre Amplifier-ProcessorTuners, Integrated Amplifiers, Tuners, Receivers, DVD
Players, CD-Recorders, CD Players, Audio Cassette Decks,
Learning Remote Control Devices, Universal Dock & DLP
front Projectors.
2. VCR's, Wallvisions, Plasma TVs, LCD TVs & HDD
Products have a 1 year warranty for parts and labor from the
original purchase date.
3. Rear Projection TVs have a 2 year warranty for parts and
labor from the original purchase date.
4. DLP lamps have a 90 day warranty for parts and labor from
the origianl purchase date.
What is covered and what is not covered
Except as specified below, this warranty covers parts and labor
to correct all defects in materials and workmanship. The following are not covered by the warranty:
1. Damage, deterioration, malfunction or failure to meet performance specifications resulting from:
a) Accident, acts of nature, misuse, abuse, neglect or unauthorized product modification.
b) Improper installation, removal or maintenance, or failure to follow instructions supplied with the product.
c) Repair or attempted repair by anyone not authorized by
Marantz to repair the product.
d) Any shipment of the product (claims must be presented
to the carrier).
e) Any cause other than a product defect.
2. Cleaning, initial set-up, check-Ups with no defects found, or
charges incurred for installation, removal or reinstallation of
the product.
3. Any product on which the serial number has been defaced,
modified or removed.
4. Batteries.
5. Accessories, including but not limited to, batteries, cables,
mounting hardware and brackets, cleaning accessories,
antenna and detachable power cords.
What we will pay for
We will pay for all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed
in the next section of this warranty.
How you can get service
1. If your unit needs service, contact Marantz service referral by
calling toll-free 1-800-270-4533. We will advise you of the
name and location of one or more authorized Marantz service stations from which service can be obtained. Please do
not return your unit to the factory without prior authorization.
2. You must pay any shipping charged if it is necessary to ship
the product for service. However, if the necessary repairs are
covered under warranty, we will pay the return shipping
charges to any destination within the United States, its possessions or territories.
3. Whenever warranty service is required, you must present the
original dated sales receipt or other proof of date of purchase.
Limitation of implied warranties
All implied warranties, including warranties of merchantability
and fitness for a particular purchase, are limited in duration to
the length of this warranty.
Exclusion of damages
Marantz liability for any defective product is limited to repair or
replacement of the product at Marantz's option. Marantz shall
not be liable for damage to other products caused by any defects
in Marantz products, damages based upon inconvenience or
loss of use of the product, or any other damages, whether incidental, consequential, or otherwise.
How state law relates to the warranty
Some states do not allow limitations on how long an implied
warranty lasts and / or do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitations
or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
6. Warranty is void if purchase was made from anyone other
than an authorized Marantz dealer.
Marantz America, Inc.
100 Corporate Drive,
Mahwah, NJ, 07430
Phone. 800-654-6633 Fax. 201-762-6686
PRINTED IN JAPAN
6/06
3133 115 78064
092J854117
Dlapantz®
MARANTZ CANADA LIMITED WARRANTY
Marantz Canada ("Marantz") warrants the following Marantz
products for the periods indicated:
3-year warranty for both Parts & Labour, from the original
purchase date :
Amplifiers; Pre Amplifiers; Pre Amplifier-Processor-Tuners;
Integrated Amplifiers; Tuners; Receivers; DVD Players; CDRecorders; CD Players; Audio Cassette Decks; Learning
Remote Control Devices; Universal Dock & DLP front
Projectors.
1 year warranty for parts and labour from the original purchase
date:
HD Digital VCR's
90 day warranty for parts and labour from the original purchase
date:
DLPlamps
3-year warranty for Labour, 2-year warranty for parts and 1·year
warranty for the Panel :
Plasma Displays
What is Covered and What is Not Covered
Except as specified below, this warranty covers parts and
labor to correct all defects in materials and workmanship. The
following are not covered by the warranty:
1. Damage, deterioration, malfunction or failure to meet
performance specifications resulting from:
a) Accident; acts of nature; misuse; abuse; neglect;
unauthorized product modification.
b) Improper installation, removal or maintenance, or
failure to follow instructions supplied with the
product.
c) Repair or attempted repair by anyone not authorized
by Marantz to repair the product.
d) Any shipment of the product (claims must be
presented to the carrier)
e) Any cause other than a product defect
2. Cleaning, initial set-up, check-ups with no defects found,
or charges incurred for installation, removal or
reinstallation of the product.
3. Any product on which the serial number has been
defaced, modified or removed.
Who May Enforce the Warranty
Only the original purchaser may enforce this warranty.
What We Will Pay For
We will pay for all labor and material expenses for items
covered by the warranty. Payment of shipping charges is
discussed in the next section of this warranty.
How You Can Get Service
1. If your unit needs service, it may be taken or shipped to
any authorized MARANTZ service station or MARANTZ
CANADA (if you are uncertain as to whether a service
station is MARANTZ authorized, please contact
MARANTZ as listed below). Please do not return your
unit to the factory without prior authorization.
2. You must pay any shipping charged if it is necessary to
ship the product for service. However, if the necessary
repairs are covered under warranty, we will pay the
return shipping charges to any destination within
Canada.
3. Whenever warranty service is required, you must present
the original dated sales receipt or other proof of date of
purchase.
Limitation of Implied warranties
All implied warranties, including warranties of
merchantability and fitness for a particular purchase, are
limited in duration to the length of this warranty.
Exclusion of damages
Marantz liability for any defective product is limited to repair
or replacement of the product at Marantz's option. Marantz
shall not be liable for damage to other products caused by
any defects in Marantz products, damages based upon
inconvenience or loss of use of the product, or any other
damages, whether incidental, consequential, or otherwise.
Some provinces do not allow limitations on how long an
implied warranty lasts and / or does not allow the exclusion of
incidental or consequential damages, so the above limitations
and exclusions may not apply to you.
This warranty gives you specific legal rights, but you may
also have other rights, which vary from province to province.
4. Accessories, including but not limited to, batteries, cables,
mounting hardware and brackets, cleaning accessories,
antenna and detachable power cords.
5. Warranty is void if purchase was made from anyone
other than an authorized Marantz dealer.
MARANTZ Canada
Division of D&M Canada Inc.
5-505 Apple Creek Blvd.,
Markham, Ontario
L3R 5B1
1-888-258-9361
www.marantz.com
PRINTED IN JAPAN
3/07
00M183J854016
Dlapantz@
GARANTIE LlMITEE DE MARANTZ CANADA
Marantz Canada ("Marantz") garantie les produits suivants
pour les periodes indiquees :
3 ans de garantie pour les pieces et la main d'muvre prenant
effet apartir de la date d'achat du produit :
Amplificateurs, Preamplificateurs, Pre-ampli-processeurssyntoniseurs; amplificateurs integres, syntoniseurs,
recepteurs, lecteurs DVD, enregistreurs CD, lecteurs CD,
pIatines it cassette audio, telecommandes programmables,
Dock universel et projecteurs avant DLP.
1 an de garantie pour les pieces et la main d'muvre prenant
effet apartir de la date d'achat du produit :
Magnetoscope numerique HD
90 jours de garantie pour les pieces et la main d'muvre prenant
effet apartir de la date d'achat du produit :
Lampes DLP
3 ans de garantie pour la main d'muvre, 2 ans de garantie pour
les pieces et un an de garantie pour Ie panneau :
Ecrans it plasma
Ce qui est couvert et pas couvert par la garantie :
A l'exception de ce qui est mentionne ci-dessous, cette
garantie couvre les pieces et la main d'ceuvre afin de reparer
tous les defauts de materiel ou de fabrication du produit. Ce
qui suit n'est pas couvert par la garantie :
1. Les dommages, deterioration, defauts de fonctionnement,
ou Ie fait de ne pas respecter les specifications d'executions
resultant d'un (e) :
a) accident, acte de la nature, abus, negligence, utilisation
impropre ou d'une modification de produit non
autorisee;
b) installation incorrecte, deplacement, maintenance ou
d'un emploi contraire aux instructions fournies avec
Ie produit;
c) reparations ou tentatives de reparations par une
personne non reconnue par Marantz;
d) envoi de produit (les reclamations doivent etre
presentees au transporteur)
e) cause autre qu'un defaut de produit.
2. L'entretien, l'installation initiale, toute verification de produit
ou aucun defaut n'a ete trouve, ou tous frais encouIUS pour
l'installation, Ie deplacement ou la reinstallation du produit.
3. Tout produit dont Ie numero de serie a ete efface, modifie
ou enleve.
4. Les accessoires incluant mais non limites aux, piles,
cables, materiaux de support, accessoires de nettoyage,
antennes et cordons de secteur detachables.
5. La garantie n'est pas valable si l'achat a ete fait au Canada
chez un revendeur non reconnu par Marantz.
Qui peut faire appliquer la garantie
Seule la personne qui a achete Ie produit
appliquer la garantie.
a l'origine peut faire
Notre paiement
Nous paierons tous les frais de pieces et de main d'ceuvre
pour tous les produits couverts par la garantie. Le paiement
des frais de livraison est aborde dans la section suivante de
cette garantie.
Comment vous pouvez obtenir Ie service de reparation
1. Si vous avez besoin de faire reparer votre appareil, vous
pouvez l'envoyer ou Ie deposer chez un atelier de service
autorise Marantz ou directement chez Marantz Canada
(Dans Ie cas ou vous n'etes pas sur de savoir si un atelier de
service est autorise ou non it reparer votre appareil, vous
pouvez contacter Marantz Canada a l' adresse et au numero
de telephone ci-dessous). Veuillez ne pas renvoyer votre
appareil a l'usine sans autorisation prealable.
2. Vous devez payer les frais de livraison dans Ie cas OU votre
appareil a besoin d'etre envoye au service des reparations.
Toutefois, si les reparations necessaires sont couvertes par
la garantie, nous payerons les frais de retour d'expedition
et ce quelle que soit la destination au Canada.
3. Lorsque vous envoyez votre appareil pour un service
sous garantie, vous devez joindre une copie de la facture
d'achat (ticket ou autre preuve d'achat)
Limites des garanties implicites
Toutes les garanties implicites, y compris les garanties de
valeur marchande et specifique pour un achat particulier,
sont limitees dans la duree it la longueur de cette garantie.
Exclusion des dommages
La responsabilite de Marantz est limitee pour n'importe quel
produit defectueux en ce qui concerne la reparation ou Ie
remplacement du produit en question. Si des dommages
interviennent it des produits autres que ceux de Marantz,
Marantz ne sera pas tenu responsable des dits dommages,
bases sur Ie derangement ou la perte d'utilisation du produit
ou tout autre dommage qu'il soit fortuit, indirect ou autre.
Certaines provinces ne permettent pas de limites quant a la
duree d'une garantie sous-entendue et/ou ne permettent pas
l'exclusion de dommages fortuits ; ainsi les limitations et les
exclusions mentionnees ci-dessus peuvent ne pas s'appliquer
a votre cas.
Cette garantie vous donne des droits legaux specifiques, mais
vous pouvez aussi avoir d' autres droits qui peuvent varier
d'une province it l'autre.
Cette garantie n'est seulement valable qu'au Canada.
MARANTZ Canada
Division of D&M Canada Inc.
5-505 Apple Creek Blvd.,
Markham, Ontario
L3R 5B1
1-888-258-9361
www.marantz.com
PRINTED IN JAPAN
3/07
00M183J854016