®
INSTALLATION GUIDE
LCR DuaiMono® In-Wall Kit
LCRDM-IW-KIT
CARTON CONTENTS:
•
•
•
•
•
•
2.
2.
4.
2.
1.
1.
In-Wall Mounting Rings
Micro Perforated Steel Grilles
LCR-DM Speaker Clamps
Portrait LCR-DM & Sketch LCR-DM Baffle Walls
Cut Out Template
Installation Guide
If you are missing any of these parts or if you need assistance during the
installation of your LCR-DM In-Wall Kit, please contact Artison's Customer Service
Department during normal business hours, Pacific Time at (n5) 783-4770.
2
Thank you for choosing the Artison LCR Dual Mono® In-Wall Kit. We are pleased
that you have selected our high-performance audio products. The following
information will guide you through the installation of your Artison LCR DuaiMono
In-Wall Kit and Speakers.
INTRODUCTION
Artisan LCR DuaiMono® (LCR-DM) speakers are designed to be used with this kit in
conjunction with any of the LCR-DM speakers.
Artisan's patented Dual Mono Center Channel design uses an array of two Center
Channels, one Left Channel, and one Right Channel; all housed in two aluminum
enclosures. All 4 speakers have independent air chambers and crossovers. The In-Wall
LCR-DM Kit maintains the closed-back design of the LCR-DM which ensures that the
performance of the speaker is maintained, independent of the wall cavity size or wall
construction type. The two adapted enclosures are then fitted into the in-wall mounting
rings, hidden inside the wall and covered with ultra-low profile micro-perforated grilles.
This creates less visual clutter by eliminating the above or below standard center channel
speaker, thus enabling one TOTAL INVOLVEMENT EXPERIENCE®.
3
INSTALLING THE IN-WALL LCR SPEAKERS
This section will give you installation tips and instructions on how to install and run speaker wire
for your Artison In-Wall LCR-DM.
SPEAKER PLACEMENT GUIDELINES
1. The In-Wall LCRs were designed to complement a Flat Panel Display by being installed in the
wall on the Left and Right sides of the display.
2. The In-Wall LCRs were designed to be compatible with a standard 2 x 4 stud wall.
2.1.
Cut out Dimensions are:
31.1 in. x 7.6 in (790 mm x 193 mm)
The minimum mounting depth for the In-Wall LCRs is 2.9" (74 mm). The Dog
Clamps were designed to work with W' or%" thick drywall.
3. The In-Wall LCR enclosures should both be:
3.1.
Installed at the same height in the wall.
3.2.
Installed no more that 10ft apart horizontally.
3.3.
Installed equal distances away from the flat panel display.
3.4.
Installed with the DuaiMono Center Channels being the upper speaker. This is
indicated by left and right marked on the front of the speaker.
When painting the LCR-DM In-Wall Kit, please remove the grille and trim ring assembly from the
speaker and paint separately. The fabric scrim coating should be gently removed from the grille
before painting and replaced after drying is complete. DO NOT get paint on the speaker baffle
or drive units. Paint can damage the components which would VOID your Warranty.
ATTACHING THE IN-WALL KIT
1.
Remove the metal bands from the rear of the baffle frame with a #2 philips screwdriver. If
using the M-LCR-DM also remove the additional baffle wall with the same tool.
2.
Insert the LCR-DM Speaker from the back of the baffle frame into the opening until it sits
flat into the frame.
3.
Place the 2 metal bands per speaker around the aluminum extrusion of the LCR-DM and
tighten the 4 screws in place to secure the speaker.
4
SPECIFICATIONS & DIMENSIONS:
LCR DUALMONO® IN-WALL KIT
LCR-DM-IW-KIT
Dimensions:
32.8" x 9.2" x 3", HWD Overall
7.6" x 31.1", HW Cut Out Dimensions
Cabinet I Finish:
Glass Filled ABS I Black Satin;
Micro Perforated Steel Grille I White Powdercoat,
Can be Painted
System Weight:
5 lbs. (2.5 kg.) including Mounting Hardware & Grilles
5
[ 0.11]
2.90
[9.29]
235.90
Cut Out Dimensions:7.6" W x 31.1" H
Mounting Flange Width: 0 .5"
Finished Height above Drywall: 0.1"
Bezel Width: 0.1"
,........,
-o
-odc--1
[9.29]
[ 32.81]
833..40
235.90
[31.12]
790.50
[7.60]
193
6
LIMITED WARRANTY
This warranty remains in effect for five years from the date of purchase for speaker
products and one year for electronic products.
THIS WARRANTY PROTECTS THE ORIGINAL OWNER PROVIDING THAT THE
PRODUCT HAS BEEN PURCHASED FROM AN AUTHORIZED ARTISON DEALER IN
THE UNITED STATES. THE ORIGINAL BILL OF SALE MUST BE PRESENTED
WHENEVER WARRANTY SERVICE IS REQUIRED. FOR WARRANTY SERVICE
OUTSIDE THE UNITED STATES, CONTACT THE AUTHORIZED ARTISON
DISTRIBUTOR IN THE COUNTRY WHERE THE PRODUCTWAS PURCHASED.
Except as specified below, this warranty covers all defects in material and workmanship.
The following are not covered: Damage caused by accident, misuse, abuse, product
modification or neglect, damage occurring during shipment, damage from failure to follow
instructions contained in the Owners Manual, damage resulting from the performance of
repairs by someone not authorized by Artison, or any claims based on
misrepresentations by the seller. This warranty does not cover incidental or
consequential damages. It does not cover the cost of removing or reinstalling the unit.
THIS WARRANTY IS VOID IF THE SERIAL NUMBER HAS BEEN REMOVED OR
DEFACED, OR IS PURCHASED FROM AN UNAUTHORIZED DEALER ON THE
INTERNET (WORLD WIDE WEB), MAIL ORDER, 800, 888, 877 TELEPHONE
NUMBERS OR THROUGH A CATALOG.
This warranty gives you specific legal rights. You may also have other rights, which vary
from state to state. Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty lasts, so the above
may not apply to you.
Please make note of the following information and retain for your record.
·-------Product Name_ _ _ _ _ _ _ _ _ _ Model Number_
Store Name_ _ _ _ _ _ _ _ _ _ _ Purchase Price_ _ _ _ _ _ __
HOW TO OBTAIN SERVICE
Please call us at (775) 783-4770, or write to: ARTISON (Attention: Customer Service
Department), 2231 Meridian Blvd, Suite 1, Minden, NV 89423.
We will promptly advise you of what action to take. We may direct you to an authorized Artisan
Service Center or ask you to send your speaker to the factory for repair. You will need to present
the original bill of sale to establish the date of purchase. PLEASE DO NOT SHIP YOUR
ARTISON PRODUCT TO THE FACTORY FOR REPAIR WITHOUT PRIOR AUTHORIZATION.
PLEASE DO NOT RETURN PRODUCT TO THE ABOVE ADDRESS, IT IS NOT A SERVICE
LOCATION. You are responsible for transporting your product for repair and for payment of any
initial shipping charges. However, we will pay the return shipping charges if the repairs are
covered under warranty.
7