Denon AVR-E200 Owner`s manual

PORTUGUÊS
AVR-E200
AV SURROUND RECEIVER
Getting Started
Mise en route / Antes de empezar / Iniciação
ESPAÑOL
FRANÇAIS
ENGLISH
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
ESPAÑOL
NEDERLANDS
SVENSKA
Read before use
Thank you for purchasing this Denon product.
This Getting Started guide will let you quickly and easily setup this unit and connect it to your other devices.
Contents
About this manual
Read before use ·····································································1
Accessories·····················································································1
About this manual·········································································1
Cautions on handling·····································································1
nnOperation buttons
•Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
nnSymbols
•Power is supplied to some of the circuitry even when the unit is
set to the standby mode. When going on vacation or leaving home
for long periods of time, be sure to unplug the power cord from the
power outlet.
The operations described in this manual are based mainly on
remote control operation.
Connecting the speakers····················································2
v
This symbol indicates a reference page on which
related information is described.
Before setting up the speakers·······································5
m
This symbol indicates the page of the owner’s manual
on the CD-ROM provided.
Set up speakers ·····································································6
Playing a Blu-ray Disc player··········································10
Check that the following parts are supplied with the product.
qGetting Started......................................................................... 1
wCD-ROM (Owner’s manual)..................................................... 1
eSafety Instructions................................................................... 1
rWarranty (for North America model only)................................. 1
tRemote control unit (RC-1180)................................................. 1
yR03/AAA batteries.................................................................... 2
uAM loop antenna...................................................................... 1
iFM indoor antenna................................................................... 1
oSpeaker cable label................................................................... 1
t
This symbol indicates a supplementary information
and tips for operations.
NOTE
This symbol indicates points to remember operations
or function limitations.
nnIllustrations
Accessories
u
Note that the illustrations in this manual are for explanation
purposes and may differ from the actual unit.
nnAbout the CD-ROM
(Getting Started / Owner’s manual)
You need to have Adobe Reader® installed on your computer to
view the owner’s manuals on the CD-ROM.
Click the Adobe Reader® banner in the CD-ROM menu to install
the Adobe Reader® (for Windows).
i
If you click the
mark on the front cover of the supplied
owner’s manuals on the CD-ROM, the mark operation explanation
screen list is displayed. Check this list before viewing the owner’s
manuals on the CD-ROM.
1
Cautions on handling
•About Condensation
If there is a major difference in temperature between the inside of
the unit and the surroundings, condensation (dew) may form on
the operating parts inside the unit, causing the unit not to operate
properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
•Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from this unit when it is in use.
•Moving the unit
Turn off the power and unplug the power cord from the power
outlet. Next, disconnect the connection cables to other system units
before moving the unit.
•About Care
•Wipe the cabinet and control panel clean with a soft cloth.
•Follow the instructions when using a chemical cleaner.
•Benzene, paint thinner or other organic solvents as well as
insecticide may cause material changes and discoloration if brought
into contact with the unit, and should therefore not be used.
SVENSKA
NEDERLANDS
ESPAÑOL
PORTUGUÊS
ESPAÑOL
FRANÇAIS
ENGLISH
Connecting the speakers
Connect
This unit can perform 2.0-channel (two speaker stereo), 2.1-channel (two speakers and a subwoofer) and 5.1-channel (five speakers and a subwoofer) playback.
Here, we explain the installation and connection procedure when using 5.1-channel speakers.
For the installation procedure when using other than 5.1-channel, see vm page 23 “Installation/connection/setup of speakers (Advanced)”.
nnDo not plug the power plug of the main unit into the wall socket until these preparations are complete.
nnFor operation of the connected devices, refer to the user manuals for each device.
Subwoofer
(with built-in amplifier)
(sold separately)
Speaker
(sold separately)
Install
TV
(with HDMI input)
(sold separately)
nnTypical 5.1-channel surround sound speakers layout
FL
FL
FR
SL
Preparation
What you need for this step
FR
SW
SR
C
Setup
z1
C
z2
Speaker cable
(sold separately)
Subwoofer cable
(sold separately)
HDMI cable
(sold separately)
SL
SR
Listening position
Speaker cable label
(supplied)
z1 22˚ – 30˚
Remote control unit
(supplied)
R03/AAA batteries
(supplied)
FL
FR
C
SW
SL
SR
Front speaker (L)
Front speaker (R)
Center speaker
Subwoofer
Surround speaker (L)
Surround speaker (R)
Playback
•Prepare enough for the
number of speakers you will
use.
z2120˚
•Use the illustration below as a guide for how
high each speaker should be installed. The
height does not need to be exactly the same.
Front
speaker
Surround
speaker
2 – 3 ft /
60 – 90 cm
GViewed from the sideH
2
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
ESPAÑOL
NEDERLANDS
SVENSKA
Preparation
Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on
the speakers being connected to the this unit, and be sure to connect the channels
and polarities correctly.
nnConnecting the speaker cable
off about 3/8 inch/10 mm of sheathing from the tip of the
1 Peel
speaker cable, then either twist the core wire tightly or terminate
it.
NOTE
•Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also,
turn off the subwoofer.
•Connect so that the speaker cable core wires do not protrude from the speaker terminal. The
protection circuit may be activated if the core wires touch the rear panel or if the + and – sides
touch each other (vm page 54 “Protection circuit”).
•Never touch the speaker terminals while the power supply is connected. Doing so could result in
electric shock.
•Use speakers with the speaker impedances shown below.
Speaker terminals
2
FRONT
CENTER
SURROUND
Press the lever on the speaker terminal.
Speaker
impedance
6 – 16 Ω/ohms
nnAbout the speaker cable label (supplied) for channel identification
the lever on the speaker terminal, insert the core wire of
3 Holding
the speaker cable all the way into the speaker terminal.
The channel display section for speaker terminals on the rear panel is color-coded for each channel to
be identifiable.
Speaker terminals
FRONT L
4 Release your finger from the lever on the speaker terminal.
Color
White
FRONT R
Red
CENTER
Green
SURROUND L
Light blue
SURROUND R
Blue
Attach the speaker cable label for each channel to its speaker cable as shown in the diagram.
Then, make the connection so that the color of the speaker terminal matches that of the speaker cable
label.
GHow to attach the speaker cable labelH
Speaker
3
This unit
SVENSKA
NEDERLANDS
ESPAÑOL
PORTUGUÊS
ESPAÑOL
FRANÇAIS
ENGLISH
Connect
Connect
Preparation
Setup
FR
FL SW
C
Playback
SL
SR
4
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
ESPAÑOL
NEDERLANDS
SVENSKA
Before setting up the speakers
1
onnect this unit to the television using an HDMI cable
C
(sold separately)
3
Insert the main unit power plug into the wall socket
When a device supporting Deep Color signal transfer is connected, use a cable compatible
“High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.
HDMI IN
To household power outlet
(AC 120 V, 60 Hz)
4
Power cord
Insert the provided batteries into the remote control unit
q Remove the rear lid in the direction of the
arrow and remove it.
w Load the two batteries properly as indicated by
the marks in the battery compartment.
R03/AAA
2
Turn the television and subwoofer power on, and
switch the video input to this unit (HDMI input)
For details on how to operate the television and subwoofer , see the television and subwoofer
instruction manual.
q Power on
e Put the rear cover back on.
5
Turn on power to the unit
The power indicator flashes green and the power turns on.
Press POWER X
w Power on
e Switch the input to this unit (HDMI input)
5
POWER
QUICK SELECT
1
2
3
4
CBL /SAT
DVD
MEMORY
BAND
You can also switch the power from standby to on
by pressing X on the main unit.
SVENSKA
NEDERLANDS
ESPAÑOL
PORTUGUÊS
ESPAÑOL
FRANÇAIS
ENGLISH
Set up speakers
Speaker Config.
Levels
Crossovers
Setup Menu
Inputs
Speakers
General
Set the maximum frequency of the bass signal
output from each channel to the subwoofer.
Set the Crossover Frequency to suit the bass
reproduction capability of the speaker being used.
Set subwoofer and LFE signal range playback.
QUICK SELECT
1
2
CBL
/SAT
Input
3
MEMORY
DVD
Assign
Source Level
Input
Blu-ray Select
GAME
SHIFT
Video Source
4
BAND
1
Press SETUP.
The menu is displayed on the TV screen of
this unit.
MODE
Setup Menu
AUX
TV AUDIO TUNER CHANNEL
TUNE
Input Assign
Source Level
Input Select
Video Source
BACK Return
ENTER Enter
CH LEVEL
Use ui to select
2 “Speakers”,
Inputs
Speakers
General
SLEEP
INFO
DIMMER SEARCH
ui to select “Speakers”, and
2 Use
then press ENTER.
AUDIO
ENTER Enter
and then press
ENTER.
BACK Return
VOLUME
ENTER
Speakers
BACK
Speaker Config.
Distances
Levels
Crossovers
Bass
SETUP
Front
Center
Surround
Subwoofer
ui to select the menu to be set
3 Use
or operated, and then press ENTER.
Use ui to select “Speaker Config.”,
o p to select a detailed setting,
3
and
then press ENTER.
4 Use
and then press ENTER.
NIGHT RESTORER
SURROUND
TONE
MUTE
Setup
Bass
The menu is displayed on the TV screen of
this unit.
POWER
Set distance from listening position to speakers.
Measure beforehand the distance from the listening
position to each speaker.
Set the volume of the test tone to be the same when
it is output from each speaker.
Speaker Config.
1 Press SETUP.
Preparation
Distances
Indicate speaker presence and select speaker size
categories based on bass reproduction capability.
Menu operation
Connect
For optimum surround playback, adjustment of the distance of speakers and
sound level of each channel, using the test tone, are required, depending on the
environment for speakers to be used.
The settings for the following 5 items should be made:
AUDIO DELAY
ENTER Enter
•To return to the previous item, press BACK.
•Exiting the Menu, press SETUP while the menu
RC-1170
is displayed.
The menu display disappears.
BACK Return
1 Speaker Config.
Small
Small
Small
Yes
Playback
Front
Center
Surround
Subwoofer
NOTE
Do not use the ENTER
outward
or Return
size of the
Enter shape
BACK
speaker to determine selection of a “Large” or
“Small” speaker. Instead, use the frequencies set
in “Crossovers” (vpage 8) as the standard
for determining bass reproduction capability.
vSee overleaf
6
ENGLISH
DEUTSCH
FRANÇAIS
FRANÇAIS
ESPAÑOL
Speaker Config. (Continue)
PORTUGUÊS
ITALIANO
ESPAÑOL
Default settings are underlined.
to select a speaker, and use
4 oUsepui
to select a detailed setting.
Subwoofer
Set the presence of a subwoofer.
•Yes : Use a subwoofer.
•No : Select when a subwoofer is not connected.
Front
Set the front speaker size.
•Large : Use a large speaker that can adequately
play back very low bass frequencies.
•Small : Use a small speaker that has inadequate
playback capacity for very low bass frequencies.
Note that for most multi-channel speakers, this
is the best choice.
When “Front” is set to “Small”, “Subwoofer”
is automatically set to “Yes”.
Items to be set are shown below.
•When “Subwoofer” is set to “No”, “Front” is
automatically set to “Large”.
•When “Front” is set to “Small”, “Center” and
“Surround“ can not be set to “Large”.
Center
Set the presence and size of the
center speaker.
•Large : Use a large speaker that can adequately
play back very low bass frequencies.
•Small : Use a small speaker that has inadequate
playback capacity for very low bass frequencies.
Note that for most multi-channel speakers, this
is the best choice.
•None : Select when a center speaker is not
connected.
“Large” is not displayed when “Front” is set
to “Small”.
Surround
Set the presence and size of the
surround speakers.
•Large : Use a large speaker that can adequately
play back very low bass frequencies.
•Small : Use a small speaker that has inadequate
playback capacity for very low bass frequencies.
Note that this is almost always the best choice.
•None : Select when the surround speakers are
not connected.
7
5
NEDERLANDS
SVENSKA
Distances
Default settings are underlined.
ui to select “Distances”, and
ui to select a speaker, and use
1 Use
3 Use
then press ENTER.
o p to select distance.
Speakers
Speaker Config.
Distances
Levels
Crossovers
Bass
Press ENTER to enter the setting.
Step
Front L/R
Center
Subwoofer
Surround L/R
Speakers
Speaker Config.
Distances
Levels
Crossovers
Bass
ENTER Enter
Front
Center
Surround
Subwoofer
ENTER Enter
BACK Return
1 Distances
BACK Return
Step
Front L
Front R
Center
Subwoofer
Surround L
Surround R
2
1ft
12.0ft
12.0ft
12.0ft
12.0ft
10.0ft
10.0ft
BACK Return
ENTER Enter
Use o p to change
the step
(minimum
variable distance).
1ft : For changing in 1-foot steps.
0.1ft : For changing in 0.1-foot steps.
Front L / Front R / Center / Subwoofer /
Surround L / Surround R
Select speaker for distance setting.
•0.0ft – 60.0ft : Set the distance.
•The speakers that can be selected differ
depending
on
the
“Speaker
Config.”
(vpage 6) settings.
•Default settings :
Front L / Front R / Center / Subwoofer : 12.0 ft
Surround L / Surround R : 10.0 ft
•Set the difference in the distance between the
speakers to less than 20 ft.
NOTE
Speakers set to “None” in “Speaker Config.”
(vpage 6) are not displayed.
4 Press ENTER to enter the setting.
Speakers
Speaker Config.
Distances
Levels
Crossovers
Bass
ENTER Enter
Step
Front L/R
Center
Subwoofer
Surround L/R
BACK Return
SVENSKA
NEDERLANDS
ESPAÑOL
Levels
PORTUGUÊS
ITALIANO
FRANÇAIS
ESPAÑOL
Default settings are underlined.
Test Tone Start
Set Defaults
ENTER Enter
BACK Return
1 Levels
Test Tone Start
Set Defaults
Enter
BACK Return
•When o is pressed while the subwoofer volume
is set to “–12 dB”, the “Subwoofer” setting
switches to “Off”.
•When “Levels” is adjusted, the adjusted values
are set for all the surround modes. To adjust
the channel level separately for the different
surround modes, use the operation see vm
page 27 “Adjusting the volume of the speakers”.
Speakers
The “Levels” settings are returned
to the default settings.
BACK Return
ENTER Enter
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
Speaker Config.
Distances
Levels
Crossovers
Bass
Front
Center
Surround
Set Defaults
5
ENTER Enter
BACK Return
Press BACK.
Speakers
Speaker Config.
Distances
Levels
Crossovers
Bass
ENTER Enter
1 Crossovers
Test Tone Start
Set Defaults
Front
Center
Surround
80Hz
80Hz
80Hz
BACK Return
ENTER Enter
BACK Return
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
BACK Return
•Speakers set to “None” in the “Speaker Config.”
(vpage 6) settings are not displayed.
•When a headphones plug is inserted in the
PHONES jack of this unit, the “Levels” is not
displayed.
•While speaker level settings can be
accomplished by listening to the test tones and
switching between the speakers and making
adjustments, a sound pressure level meter can
aid in the process. You might also be able to
use your smartphone as a sound pressure level
meter by downloading a sound pressure level
app from your smartphone app source.
Playback
ENTER Enter
A test tone is output from the selected
speaker. While listening to the test tone,
adjust the output from the selected speaker
so that it matches the sound output from the
other speakers. Ideally, all speakers should
provide the same sound output.
•–12.0dB – +12.0dB (0.0dB) : Adjust the volume.
Use ui to select “Crossovers”, and
then press ENTER.
NOTE
1 Levels
Front L
Center
Front R
Surround R
Surround L
Subwoofer
Front L / Center / Front R / Surround R /
Surround L / Subwoofer
1
Setup
Output test tone.
ENTER
Test Tone Start
Set Defaults
Crossovers
Preparation
Speaker Config.
Distances
Levels
Crossovers
Bass
2 Press ENTER.
1 Levels
each speaker to be equal.
Speakers
ENGLISH
Connect
ui to select “Levels”, and then
to select a speaker, and use
1 Use
3 oUsepui
4 Press ENTER to enter the setting.
press ENTER.
to adjust the sound volume of
FRANÇAIS
DEUTSCH
vSee overleaf
8
ENGLISH
DEUTSCH
FRANÇAIS
FRANÇAIS
ESPAÑOL
Crossovers (Continue)
2 o pui
Use
to select a speaker, and use
to select the frequency.
Front / Center / Surround
Select speaker for setting of crossover
frequency.
•40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz /
120Hz / 150Hz / 200Hz / 250Hz : Set the
crossover frequency.
PORTUGUÊS
ITALIANO
ESPAÑOL
Default settings are underlined.
3 Press ENTER to enter the setting.
Speakers
Speaker Config.
Distances
Levels
Crossovers
Bass
NEDERLANDS
SVENSKA
Bass
1
Front
Center
Surround
Default settings are underlined.
Use ui to select “Bass”, and then
press ENTER.
1 Bass
Speakers
Speaker Config.
Distances
Levels
Crossovers
Bass
4 Press SETUP.
LPF for LFE
SW Mode
LPF for LFE
SW Mode
SW Mode
BACK Return
ENTER disappears.
Enter
The menu display
•“Crossovers” can be set when the “Bass”
– “SW Mode” (vpage 9) setting is
“LFE+Main”, or when you have a speaker that
is set to “Small”.
•The default crossover frequency is “80Hz”,
which will work best with the widest variety
of speakers. When using very small speakers,
however, you can choose a higher setting
based on the specified frequency response of
the speakers. If the speaker has a specified
frequency response of 120 Hz – 20 kHz (as an
example), then choose the 120 Hz crossover
frequency.
•For speakers set to “Small”, low frequency
content below the crossover frequency is
attenuated to the speakers and the low bass
content is then re-delivered to the subwoofer(s),
or the front (L/R) speakers if they have been set
to Large.
•The “SW Mode” setting (vpage 9)
determines which speakers can be set.
•When “LPF for LFE” is selected, speakers set
to “Small” at “Speaker Config.” can be set. If
the speakers are set to “Large”, “Full Band”
is displayed and the setting cannot be made.
•If set to “LFE+Main”, this setting can be made
regardless of the speaker size.
ui to select “SW Mode”, and
3 Use
use o p to select a detailed setting.
ENTER Enter
BACK Return
1 Bass
LPF for LFE
SW Mode
2
100Hz
LFE+Main
Use o p to select the frequency.
ENTER Enter
BACK Return
LPF for LFE Set LFE signal playback range. Set
this when you want to change the
playback frequency (low pass filter
point) of the subwoofer.
•80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz /
200Hz / 250Hz
Select low range signals to be
reproduced
by subwoofer.
ENTER Enter
BACK Return
•LFE : The low range signal of the channel set to
“Small” speaker size is added to the LFE signal
output from the subwoofer.
•LFE+Main : The low range signal of all channels
is added to the LFE signal output from the
subwoofer. This is usually the best setting for
most systems.
•“SW Mode” can be set when “Speaker Config.”
– “Subwoofer” (vpage 6) is set to other
than “No”.
•Play music or a movie source and select the
mode offering the strongest bass.
•Select “LFE+Main” if you want the bass signals
to always be produced from the subwoofer.
NOTE
If “Front” and “Center” for “Speaker Config.”
are set to “Large”, and “SW Mode” is set to
“LPF for LFE”, no sound may be output from
the subwoofers, depending on the input signal or
selected surround mode.
4 Press ENTER to enter the setting.
Speakers
Speaker Config.
Distances
Levels
Crossovers
Bass
ENTER Enter
9
100Hz
LFE+Main
LPF for LFE
SW Mode
BACK Return
SVENSKA
NEDERLANDS
ESPAÑOL
PORTUGUÊS
ITALIANO
FRANÇAIS
ESPAÑOL
FRANÇAIS
DEUTSCH
ENGLISH
Playing a Blu-ray Disc player
Make the necessary settings on the player (language setting, subtitles
setting, etc.) beforehand.
3 Adjust the sound volume.
BAND
Blu-ray
GAME
SHIFT
MODE
nn Playing a Blu-ray Disc player/DVD player
nn Playing a portable player
nn Tuning in radio stations
nn Selecting a listening mode
(Surround mode)
nn Playback (Advanced operation)
nn How to make detailed settings
AUDIO
VOLUME
BACK
SURROUND
SETUP
TONE
MUTE
Setup
AUDIO DELAY
GConnecting a Blu-ray Disc playerH
Blu-ray Disc player
HDMI
OUT
Playback
During power standby, a minimal amount of power is
consumed. To totally cut off the power, remove the
power cord from the power outlet.
4
MEMORY
NIGHT RESTORER
•Each time SURROUND 0 or SURROUND 1 is pressed, the listening mode is
switched. Select the desired listening mode.
NOTE
3
DVD
ENTER
The listening mode is displayed on the display or TV screen.
nn Power indicator status in standby mode
•Power on : Green
•Normal standby : Off
•Standby when “Pass Through” (vm page 38)
is not set to “Off” : Red
2
CBL /SAT
See the following items on the included CD-ROM (Owner’s manual).
AUX
SURROUND 0 or SURROUND 1 to select a listening
4 Press
mode.
Press POWER X.
QUICK SELECT
1
INFO
VOLUME d/f····················· Volume up /down
MUTE ·················································Muting
When power is switched to standby
POWER
Other operations
Preparation
Press Blu-ray to switch an input source for a player used for
1 playback.
2 Play the component connected to this unit.
Connect
This section explains the basic operations for surround playback using a Blu-ray
Disc player connected to this unit.
For details, see the included CD-ROM (Owner’s manual).
HDMI
cable
(sold separately)
10
V00
www.denon.com
D&M Holdings Inc.
Printed in China 5411 11004 00AD