Empire Heritage Vent-Free Cast Iron Stoves - Product

Direct-Vent
Vent-Free
Heritage Direct-Vent Cast Iron Stove in Matte Black.
Shown with optional shelf-kit.
Colors
Porcelain Black
Mahogany
Sand
Matte Pewter
Matte Black
Heritage Vent-Free Cast Iron Stove in Porcelain Mahogany. Shown with optional floor pad with Venetian Gold Tiles.
Heritage Premium Gas Stoves
Bring warmth and beauty into your home with a Heritage Series cast iron stove.
Heritage Stoves are available in five finishes – enough choices to suit any décor.
Our contemporary design features fully operable decorative cast iron doors on durable lift-pin hinges that swing open 180 degrees.
Our traditional stove finishes – matte black, porcelain black, and porcelain sand – are joined by our new porcelain mahogany (with
light and dark accents) and our oh-so-contemporary matte pewter paint.
Each of our porcelain finishes starts with a hand-applied pigment and glass mixture that’s oven fired to 1,500 degrees Fahrenheit
to produce a rich durable coating that both softens and highlights edges. Our porcelain finishes capture and reflect room light for
exceptional visual interest.
Our matte finishes, in pewter or black, show off every exquisitely intricate line and edge of the Heritage Stove casting, from the
geometric crosshatch detail to the raised ribs along the classically curved legs.
The optional side shelf sets, available in every stove color, install in seconds to create an old-world look for your Heritage stove.
Floor pads are available, but not required. The Heritage Stove may be placed directly on carpet or tile.
The unique burner system, designed specifically to fit the Heritage stove, features precision-port technology to produce vibrant
flames. The all-new ceramic material burner glows just like an actual ember bed. Topped off with the hand-painted six-piece all-new
ceramic log set, the effect is as realistic as a gas-fired hearth system gets and guaranteed to keep you and your guests mesmerized
for hours.
2
Heritage Premium Gas Stoves
Direct-Vent or Vent-Free
The Heritage direct-vent model uses standard
4 x 6 5/8 vent pipe and, at up to 32,000 Btu input with
Natural Gas (30,000 LP), generates sufficient heat to warm
any room in your home or provide total heat for a small
cabin. Your dealer can help you determine your heating
requirements. A direct-vent system draws in outdoor air to
support combustion and sends its exhaust directly outdoors.
At 99.9-percent efficient, the 32,000 Btu vent-free system
is the ultimate supplemental heat source for any home.
The clean-burning technology employs oxygen depletion
sensor technology to continuously monitor your room air and
instantly shut off the gas well before the oxygen drops to an
unsafe level.
Our vent-free system eliminates the need for
venting, but includes an adaptor to connect
non-functional
6-inch
diameter
vent
pipe
to
complete
the
illusion
of
a
wood-burning stove.
Your Heritage Cast Iron Stove ships assembled in one carton,
for easier set-up.
A reversible insert on vent-free Heritage Stoves accepts a non-functional
6-inch diameter vent pipe to create the illusion of a vented stove.
Stone Inlays and Floor Pads
Stone Colors for
Inlays & Floor Pads
Adobe Frost
Granite
Stone Inlay
CSI-9A
(replaces metal grille inlay)
Traditional Floor Pad Stone
CIFS-9A
Inlay Kit (CIFPB-1)
Corner Floor Pad Stone Inlay
CIFS-9AC
Kit (CIFPB-1C)
Patina Mocha
Tile
American Beauty
Marble
Temple Gray
Marble
Venetian Gold
Granite
CSI-10M
CSI-12A
CSI-11G
CSI-8V
CIFS-10M
CIFS-12A
CIFS-11G
CIFS-8V
CIFS-10MC
CIFS-12AC
CIFS-11GC
CIFS-8VC
Control Options
FREC
Remote Control
FRBTC and FRBC
Remote Controls
FWS
Switch
TMV
Thermostat
TRW
Thermostat
The Heritage
stove is
approved to
be placed on
carpet, tile,
and other flat
surfaces
without a
floor pad.
Optional Side Shelves attach in minutes to give an
old-world look and feel to your Heritage Stove.
Heritage Gas Stoves include a hand-painted six-piece log set and a
new burner with tall dancing flames that complements the logs.
Heritage Premium Gas Stoves
3
Heritage Premium Gas Stoves and Options
Porcelain Black
Matte Black
Porcelain Mahogany
Porcelain Sand
Matte Pewter
Direct-Vent
DVP-30-CA30B
DVP-30-CA30F
DVP-30-CA30M
DVP-30-CA30S
DVP-30-CA30W
Vent-Free
VFP-30-CA30B
VFP-30-CA30F
VFP-30-CA30M
VFP-30-CA30S
VFP-30-CA30W
Heritage Premium Gas Stove Dimensions
Cast Iron Stove Shelf Kit, Includes Left and Right
CSK-F
Matte Black
CSK-M
Porcelain Mahogany
CSK-S
Porcelain Sand
CSK-W
Matte Pewter
17 3/8” (DVP30CA30)
17 1/8” (VFP30CA30)
Accessories
CIB-3
Automatic, Variable Speed Blower for Cast Iron Stove
DVKHP-1
Direct Vent Kit for Horizontal Run (See Price List for Vent Kit Details)
DVKVP-1
Direct Vent Kit for Vertical Run (See Price List for Vent Kit Details)
Control Options
28 1/16”
FRBC
Battery Operated Remote Control
FRBTC
Battery Operated Remote Control with Thermostat
FREC
FWS-1
TMV
TRW
Electric Remote
On/Off Wall Switch
Wall Thermostat - Reed Switch
Wall Thermostat - Wireless Remote
Clearances
Side Wall
Back Wall
Back Wall (Vent-Free)
6 in.
1 in.
2 in.
Adjacent Corner Wall
Ceiling
0
4 in.
36 in.
HORIZONTAL RUN IN FEET
1 2 3 4 5 6 7 8 9 10 11 12 13 14
25
24
23
22
Gas Inlet
Type of Gas (State on Order) Natural or LP
Iron Pipe Size (N.P.T.) 1/2-inch DVP and 3/8-inch VFP13/8-inch CIVF
Ignition System Standing Pilot/Piezo
Warranty
The DVKHP Horizontal Termination
Kit includes Direct-Vent Pipe, Elbow,
Wall Thimble and External cap
VENTING MUST
TERMINATE IN
THIS AREA
All vent-free parts carry a 5-year limited labor warranty.
All vented parts carry a 3-year limited warranty.
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
VERTICAL RISE ABOVE FIREPLACE IN FEET
Porcelain Black
27 3/4”
CSK-B
Note: Empire Comfort Systems is committed to continuous product improvement;
specifications are subject to change without notice. Flame size, shape and color will vary
from photos.
28”
Vent-Free appliances may be installed in an aftermarket (mobile) home where not prohibited by state or local codes. The approval
(G1-0504-90B) has been granted subject to the installation in compliance with CMR 248, 527 CMR 30, Massachusetts State
Plumbing Code and/or the Massachusetts Fuel Gas Code.
This appliance is design-certified
Member of the following industry associations:
to the ANSI standard by:
Photographs represent Empire Comfort Systems products. The actual flame color and pattern may vary
due to air movement, location of the product, climate, and amount and quality of insulation.
www.empirecomfort.com
918 Freeburg Ave.
Belleville, IL 62220-2623
E-mail: info@empirecomfort.com
©Empire Comfort Systems, Inc.
ECS-00805 3­/01/11