Epson 1200S Specifications

EPSON Perfection 1200
Scanner Parts
Scanner Specifications
document cover
Basic Specifications
carriage
(in the home position)
document table
transportation
lock*
Scanner type
Flatbed, color
Photoelectric
device
Color CCD line sensor
Effective pixels
10200 × 14040 pixels at 1200 dpi,
100% scaling
Maximum
document size
US letter or A4 size
(8.5 × 11.7 inches [216 × 297 mm])
Up to legal size if using the optional auto
document feeder (the reading area can be
specified from software.)
Optical resolution 1200 dpi
Maximum
hardware
resolution*
operate button
Start button
operate light
*
1200U/1200U PHOTO/1200S front view
USB interface
connector
The maximum hardware resolution of 1200 × 2400 dpi is achieved
using EPSON’s Micro Step Drive™ technology.
Maximum
interpolated
resolution
9600 dpi
Speed (1200 dpi,
draft mode)
Color: 6.5 msec/line
Monochrome (bi-level): 2.2 msec/line
Output resolution 50 to 9600 dpi
(50 to 4800 dpi in 1 dpi increments)
AC inlet
option connector
1200U/1200U PHOTO back view
SCSI terminator switch
Color separation
RGB color filters on CCD
Command level
ESC/I-B7
Reading sequence Monochrome: One-pass scanning
Color byte sequence: One-pass scanning
(R, G, B)
Color line sequence: One-pass scanning
(R, G, B)
SCSI ID rotary switch
Zoom
50% to 200% in 1% increments
Pixel depth
12 bits per pixel (12 bits per pixel
input, 1–8 bits per pixel output)
Brightness
7 levels
Line art settings
Fixed threshold
TET (Text Enhancement Technology,
enable/disable selectable)
901
456
23
78
SCSI interface
connectors
1200 dpi (main scan) × 2400 dpi
(sub scan)
AC inlet
option connector
1200S back view
* Before connecting the scanner to a power source, the
transportation lock must be released (turned down to the unlock
position).
8/99
EPSON Perfection 1200 - 1
EPSON Perfection 1200
Operating
conditions
Digital halftoning AAS (Auto Area Segmentation, enable/
disable selectable)
3 halftoning modes (A, B, and C)
4 dither patterns (A, B, C, and D) for
bi-level and quad-level data
2 user defined patterns (A and B)
Safety Approvals
Gamma correction 2 types for CRT display
3 types for printer
1 type for user-defined
Color correction
120 V model
Safety standards
1 type for CRT display
3 types for printer output (available in
color byte sequence mode and color line
sequence mode)
1 type for user-defined
Interface
USB (1200U, 1200U PHOTO: Type B
receptacle connector)
SCSI (1200S: Two half pitch 50-pin
connectors)
Light source
White cold cathode fluorescent lamp
Reliability
30,000 cycles of carriage movements
(main unit MCBF)
Dimensions
Width: 11.3 inches (287 mm)
Depth: 16.7 inches (425 mm)
Height: 3.4 inches (88 mm)
Weight
Approx. 9.9 lb (4.5 kg)
100−120 V model
220−240 V model
Input voltage range
AC 90 to 132 V
AC 198 to 264 V
Rated frequency
50 to 60 Hz
Input frequency
49.5 to 60.5 Hz
Rated current
0.5 A
Power consumption
Approx. 25 W operating
Approx. 12 W stand by
Note:
Safety standards
230 V model
Interface type
0.3 A
Universal Serial Bus Specification
Revision 1.0
Configuration
Operation: 41 to 95 °F (5 to 35 °C);
50 to 90 °F (10 to 32 °C) when using the
auto document feeder
Storage: –13 to 140 °F (–25 to 60 °C)
Operation: 10% to 80%; 20% to 80%
when using the auto document feeder
Storage: 10% to 85%
2 - EPSON Perfection 1200
Low Voltage Directive 73/23/EEC
EN 60950
EMC Directive 89/336/EEC
EN 55022 Class B
EN 61000-3-2
EN 61000-3-3
EN 50082-1
IEC 801-2
IEC 801-3
IEC 801-4
USB Interface
Element
Description
Configuration
Characteristics: Self-powered
Remote wake up feature: Not supported
Maximum power consumption from VBUS:
2mA (5V)
Interface
No alternate setting
Number of endpoints used by this interface
(excluding endpoint 0): 2
Class: Vendor specific
Endpoint 1
Bulk IN transfer
Maximum data transfer size: 64 byte
Endpoint 2
Bulk OUT transfer
Maximum data transfer size: 64 byte
String Descriptor
Language ID: US English
1: iManufacturer: “EPSON”
2: iProduct: “Perfection1200”
Environmental
Humidity
(without
condensation)
EN 60950
EMC EN 55022 (CISPR Pub 22) class B
AS/NZS 3548 class B
CE marking
Check the label on the back of the scanner for voltage
information.
Temperature
UL 1950 with D3
CSA C22.2 No. 950
EMC FCC part 15 subpart B class B
CSA C108.8 class B
230 V model
Electrical
Specification
Ordinary office or home conditions; avoid
extreme dust, direct sunlight, and strong
light sources. Make sure the outlet
provides enough power.
8/99
EPSON Perfection 1200
Electrical standard Full Speed mode (12Mbit/s) of
Universal Serial Bus Specification
Revision 1.0
Connector type
Connector pin arrangement
One receptacle (series B)
Connector pin
arrangement
Initialization
methods
Pin number
Signal
1
VCC
2
–DATA
3
+DATA
4
GND
Initialization
methods
The scanner can be initialized (returned to
a fixed set of conditions) in the following
ways:
Connector
The scanner can be initialized (returned to
a fixed set of conditions) in the following
ways:
Hardware
initialization
* The scanner is turned on.
* The scanner receives a SCSI Reset signal from the
SCSI interface.
Software
initialization
* Software sends the ESC @ (initialize the scanner)
command.
* The scanner receives a SCSI Bus Device Message.
Optional Transparency Unit
Specifications
Hardware
* The scanner is turned on.
initialization * The USB cable is unplugged from the USB port
on the scanner.
The transparency unit (B813172) allows you to scan positive
and negative transparent materials —35 mm slides, filmstrips,
and film up to 4 × 5 inches in size.
Software
* Software sends the ESC @ (initialize the scanner)
initialization
command.
* The scanner receives a Bus Reset from the USB
interface.
The transparency unit comes bundled with the
EPSON Perfection 1200U PHOTO.
SCSI Interface
Interface type
ANSI X3T9.2/375R Revision 10L
(SCSI-2)
Functions
BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase
(the Logical Unit Number is fixed to 0
and the command link function
is not supported)
DATA phase
Data in phase
Data out phase
STATUS phase
MESSAGE phase
MESSAGE IN phase
MESSAGE OUT phase
ATTENTION condition
RESET condition
Logic level
Basic Specifications
Electrical standard ANSI X3T9.2/375R Revision 10L
(SCSI-2)
Selectable from 0 to 7 (factory setting: 2)
Terminator
Internal terminator selectable (enable/
disable)
Connector type
Two half pitch 50-pin connectors
Width: 8.7 inches (222 mm)
Depth: 12.0 inches (305 mm)
Height: 1.4 inches (36 mm)
Weight
1.5 lb (0.7 kg)
Maximum
readable area
TTL compatible
ID Setting
Dimensions
8/99
3.6 × 4.6 inches ([93 × 118 mm]
size of 4 × 5-inch film holder opening)
Electrical
Supply voltage: DC 24 V ±10% V
Rated current: 0.5 A
Reliability
10,000 hours for light source
Temperature
Operation: 41 to 95 °F (5 to 35 °C)
Storage: –13 to 140 °F (–25 to 60 °C)
Humidity
(without
condensation)
Operation: 10% to 80%
Storage: 10% to 85%
Operating
conditions
Ordinary office or home conditions; avoid
extreme dust, direct sunlight, and
strong light sources.
EPSON Perfection 1200 - 3
EPSON Perfection 1200
Safety approvals
UL 1950
CSA C22.2 No. 950
EN 60950
IEC 950
EMC
FCC Part 15 subpart B class B
CSA C108.8 class B
AS/NZS3548 Class B
CE Marking
Low voltage directive 73/23/EEC
EN60950
EMC Directive 89/336/EEC
EN55022 Class B
EN50082-1
IEC 801-2/801-3/801-4
Resistance to
Panel: 10 kV
electrical noise
Metal: 7 kV/150 pF, 150 ohm
(static electricity)
Document
specifications
Transparencies up to 4 × 5-inch film
(negative film, positive film)
35 mm strip film (negative, positive)
35 mm slides (negative, positive)
Brownie size strip film
Optional Auto Document Feeder
Specifications
Operating
conditions
Ordinary office or home conditions; avoid
extreme dust, direct sunlight, and strong
light sources.
Reliability
Load/eject: MCBF 20,000 sheets
Hinge: MCBF 12,000 cycles
Electrical
Input voltage: DC 24 V ±10%
DC 5 V ±5%
Input current: 24 V: 0.8 A
5 V: 0.2 A
Safety approvals
UL 1950
CSA C22.2 No. 950
EN60950 (VDE)
IEC950 (ROSTEST, PSB)
EMC
FCC Part 15 Subpart B Class B
CSA C108.8 Class B
AS/NZS3548 Class B
CISPR Pub 22 Class B
CNS13438 Class B
CE Marking
Low voltage directive 73/23/EEC
EN60950
EMC Directive 89/336/EEC
EN55022 Class B
EN50082-1
IEC 801-2/801-3/801-4
Resistance to
Casing: 10 kV
electrical noise
Metal: 7 kV/150 pF, 150 ohm
(static electricity)
The auto document feeder (B813142) allows you to
automatically load multi-page documents into your scanner.
This document feeder is particularly useful for OCR (optical
character recognition) scanning. You can load up to 20 legal
size (8 1/2 × 14-inches) pages in the auto document feeder.
ADF Document Specifications
Feeder capacity
20 sheets of maximum weight 55 gm
paper, total thickness less than 0.16 inch
(4 mm)
Width: 12.6 inches (319 mm)
Depth: 17.8 (451 mm)
Height: 5.4 inches (137 mm)
Size
Width: 3.3 to 8.5 inches (85 to 216 mm)
Length: 5 to 14 inches (127 to 356 mm)
Thickness
0.0028 to 0.0063 inch (0.07 to 0.16 mm)
Weight
4.9 lb (2.2 kg)
Ream weight
110 to 231 lb (50 to 105 kg)
Feeder type
Sheet through, face up loading, face down
ejecting, roller friction
Paper quality
High-quality paper, bond paper, check
paper, recycled paper
Loading position
Left side of paper against left side of feeder
Applied color
Color and monochrome
Connector
8-pin DIN male
Document type
Temperature
Operation: 50 to 90 °F (10 to 32 °C)
Storage: –4 to 140 °F (–20 to 60 °C)
Documents printed with impact printers,
laser printers, or fax machines
Humidity
(without
condensation)
Operation: 20% to 80%
Storage: 10% to 85%
Basic Specifications
Dimensions
4 - EPSON Perfection 1200
Don’t use the following paper types:
transparencies, film, coated paper, labels,
carbon paper, or paper with staples, holes, rips,
curls, or folds.
8/99
EPSON Perfection 1200
Selecting a Driver and Settings
When you select EPSON TWAIN 4 as your scanner source, you see the EPSON TWAIN window. This is the Advanced window in
Windows (the Macintosh steps are the same); there is also an Easy window with just the basic settings.
3 Automatically set the scan
area for your image using
Auto Locate
1 Select the basic settings:
Document Source
Image Type
Destination
2
4 Size or scale the image
(be sure to increase the
Resolution if you increase
the size or scale)
5 Customize your
Settings, select your
preview Configuration,
and use color management
Preview your image
6 Scan the image into your
application
7 Close the driver
Here are some recommended settings for different types of scans.
Image type
Recommended bundled
application
Recommended Image Type
Scanning resolution for
printing 1, 2
Photograph
PhotoDeluxe
Color Photo
300 dpi
Small photograph to be enlarged
PhotoDeluxe
Color Photo
300 dpi to 2400 dpi
Magazine
PhotoDeluxe
Color Photo
300 dpi
Newspaper (text only)
PageManager
OCR
400 dpi
Text for OCR
PageManager
OCR
400 dpi
Text with images
PageManager
Copy & Fax
400 dpi
Line art
PhotoDeluxe
Line Art
300 to 2400 dpi
35 mm film (negative)
PhotoDeluxe
TPU for neg.Film
300 to 2400 dpi
4 x 5 or Brownie film (negative)
PhotoDeluxe
TPU for neg.Film
300 to 2400 dpi
35 mm slide or 4 x 5 transparency PhotoDeluxe
TPU for pos.Film
300 to 2400 dpi
1
If your final output is for on-screen viewing (for example, on a web page), select 72 dpi for your resolution.
2
If you are enlarging your image, you must manually increase the resolution (dpi) proportionally to maintain the resolution of your original.
8/99
EPSON Perfection 1200 - 5
EPSON Perfection 1200
EPSON Perfection 1200U PHOTO includes:
Light and Buttons
❏ EPSON Perfection 1200U scanner
❏ Transparency unit
The scanner has one indicator light and two buttons. Light
status and button functions are described in the tables below.
❏ USB cable
❏ Windows and Macintosh CD-ROMs that include:
EPSON TWAIN Driver
Adobe PhotoDeluxe Business Edition (Windows) or
Adobe PhotoDeluxe version 2.0 (Macintosh)
BrØderbund The Print Shop PressWriter
NewSoft Presto! PageManager for EPSON
Electronic manuals (pdf)
Start
button
❏ Photo Print CD-ROM
operate button
❏ Scanner Basics guide
operate light
EPSON Perfection 1200S includes:
Scanner operate light
Light status
Color
Scanner status
F (slowly flashing)
Green
Initializing or busy scanning
N
Green
Ready to scan images
F (rapidly flashing)
Red
The scanner is locked. Turn off the
scanner, unlock the transportation
lock, then turn the scanner on.
O
N/A
The scanner is turned off
❏ EPSON Perfection 1200S scanner
❏ SCSI adapter card
❏ SCSI cable
❏ Windows and Macintosh CD-ROMs that include:
EPSON TWAIN Driver
Adobe PhotoDeluxe Business Edition (Windows) or
Adobe PhotoDeluxe version 2.0 (Macintosh)
BrØderbund The Print Shop PressWriter
NewSoft Presto! PageManager for EPSON
Electronic manuals (pdf)
N = on, O = off, F = flashing
Scanner buttons
❏ Scanner Basics guide
Button
Function
P Operate
Turns the scanner on and off.
] Start
Lets you scan directly to an application with one touch.
You must set up the scanner monitor and a compatible
application to use this button. See the
EPSON TWAIN User’s Guide for more information.
Scanner Models
The scanner is available in three different models.
Related Documentation
CPD 8881
EPSON Perfection 1200U,
1200U PHOTO Scanner Basics
CPD 8880
EPSON Perfection 1200S Scanner Basics
ET0799-00
EPSON TWAIN User’s Guide (pdf)
TM-PERF1200
EPSON Perfection 1200 Technical
Manual (applies to 1200U/
1200U PHOTO/1200S)
EPSON Perfection 1200U includes:
TM-PRF636OPT EPSON Perfection 1200 TPU/ADF
Technical Manual
❏ EPSON Perfection 1200U scanner
❏ USB cable
❏ Windows® and Macintosh™ CD-ROMs that include:
EPSON TWAIN Driver
Adobe ® PhotoDeluxe ® Business Edition (Windows) or
Adobe PhotoDeluxe version 2.0 (Macintosh)
BrØderbund ® The Print Shop® PressWriter™
NewSoft ™ Presto! ™ PageManager for EPSON
Electronic manuals (pdf)
❏ Scanner Basics guide
6 - EPSON Perfection 1200
8/99
PL-PERF1200S
EPSON Perfection 1200S Parts List
PL-PERF1200U
EPSON Perfection 1200U Parts List
PL-PERF1200P
EPSON Perfection 1200U PHOTO Parts
List
PL-B813172
EPSON Perfection 1200 TPU Parts List
PL-B813142
EPSON Perfection 1200 ADF Parts List