Agilent Basic Power
Supplies Catalog
Offering you a wide range of highly reliable and low-noise
supplies on top of other essential features
Single-output manual power supplies
Multiple-output manual power supplies
Single-output programmable power supplies
Multiple-output programmable power supplies
Change your work, change your world
Agilent Basic Power Supplies Catalog
For whatever application or industry, Agilent basic
power supplies offer excellent performance in its class
with low noise and high reliability
2
Agilent DC power supplies are small and compact. They offer quiet and stable DC power for both manual
and automatic testing. Key features include the following:
• Excellent regulation
• Low output noise
• Fast load transient response (<50 µSec)
• Remote sensing feature
• GPIB and RS-232 interface (SCPI-compatible)
• Built-in voltage and current measurements
• Overvoltage and/or overcurrent protections
• Save or recall up to three memory states
• Keypad lock
• Physical lock mechanism
DC Power Supplies Offerings Summary
Voltage
(max)
Current
(max)
Power
(max)
Load
No. of and line
ranges regulation
Ripple and
noise
I/O
interface
Categories
Models
Single-output
manual power
supplies
U8001A/U8002A
up to 30 V
up to 5 A
up to 150 W
1
0.01%+2 mV
12 mVp-p
–
E3610A/11A/12A
E3614A/15A/16A/17A
up to 120 V
up to 60 V
up to 3 A
up to 6 A
30 W
up to 60 W
2
1
0.01%+2 mV
2 mVp-p
1 mVp-p
–
Multiple-output
manual power
supplies
U8031A/U8032A
(triple-output)
up to 60 V
up to 6 A
375 W
1
0.01%+2 mV
10 mVp-p
–
E3620A (dual-output)
E3630A (triple-output)
up to 25 V
up to 1 A
up to ±20 V up to 2.5 A
50 W
35 W
1
0.01%+2 mV
1.5 mVp-p
–
Single-output
programmable
power supplies
E3632A/33A/34A
E3640A-E3645A
up to 50 V
up to 60 V
up to 200 W
up to 80 W
2
0.01%+2 mV
0.01%+3 mV
best at 2 mVp-p
best at 5 mVp-p
GPIB and
RS-232
Multiple-output
programmable
power supplies
E3646A-E3649A
E3631A
up to 60 V
up to 5 A
up to ±25 V
up to 100 W
80 W
2
1
0.01%+3 mV
0.01%+2 mV
best at 5 mVp-p
2 mVp-p
GPIB and
RS-232
up to 20 A
up to 8 A
Table of Contents
Single-output. Manual. 30 W to 60 W ................................................................................................................................................... 4
Single-output. Manual. 90 W and 150 W .............................................................................................................................................. 5
Multiple output. Manual. 35 W and 50 W ............................................................................................................................................. 6
Triple-output. Manual. 375 W .................................................................................................................................................................. 7
Triple-output. Programmable. 80 W ....................................................................................................................................................... 8
Single and dual-output. Programmable. 30 W to 100 W .................................................................................................................... 9
Single-output. Programmable. 120 W to 200 W ................................................................................................................................. 11
3
Reliable power, repeatable results
Reliable power, repeatable results
Single-output. Manual. 30 W to 60 W
Single-output. Manual. 30 W to 60 W
Features
• Dual-range outputs (E3610A/11A/12A)
• Remote programming (E3614A/15A/16A/17A)
• Remote sensing (E3614A/15A/16A/17A)
• Overvoltage protection (OVP)
(E3614A/15A/16A/17A)
E3610A – E3617A
• Overload protection
These linear-regulated DC power supplies provide reliable and convenient DC power on a lab bench. The 10-turn pots and clear voltage and
current meters allow fine adjustments to be made easily. These models are CV/CC, so they can serve as either voltage or current sources. The
“CC Set” button allows the current setting to be viewed, allowing easy adjustment of a current limit. Either the positive or negative terminal
may be connected to ground, creating a positive or negative voltage, or floated up to 240 V from ground.
E3610A, E3611A, E3612A
These flexible 30 W DC power supplies have 2 ranges, providing more current at lower voltage levels.
E3614A, E3615A, E3616A, E3617A
These DC power supplies provide remote sensing to eliminate the errors in voltage regulation due to voltage drops in the load leads. Delicate
loads are protected by the overvoltage protection feature. Remote voltage signals can be used to control the power supply’s output voltage
and current levels.
Supplemental Characteristics
Ordering Information
Size: E3610A-E3612A: 213 mm W x 91 mm H x 319 mm D (8.4 in x 3.6 in x 12.6 in.)
E3614A-E3617A: 213 mm W x 91 mm H x 373 mm D (8.4 in x 3.6 in x 14.7 in.)
Weight: E3610A-E3612A: 3.8 kg (8.4 lbs) net, 5.1 kg (11.3 lbs) shipping
E3614A-E3617A: 5.5 kg (12.1 lbs) net, 6.75 kg (14.9 lbs) shipping
Warranty: One year
Opt 0E9 90 to 110 Vac, 47 to 63 Hz (Japan only)
Opt 0EM 104 to 126 Vac, 47 to 63 Hz
Opt 0E3 207 to 253 Vac, 47 to 63 Hz
Opt 1CM Rack mount kit (E3614A-E3617A only)
Opt 0L2 Extra documentation package
Specifications (at 0 °C to 55 °C unless otherwise specified)
E3610A
E3611A
E3612A
E3614A
E3615A
E3616A
E3617A
Number of output ranges
2
2
2
1
1
1
1
GPIB
No
No
No
No
No
No
No
Range 1
0 to 8 V,
0 to 3 A1
0 to 20 V,
0 to 1.5 A1
0 to 60 V,
0 to 0.5 A1
0 to 8 V,
0 to 6 A
0 to 20 V,
0 to 3 A
0 to 35 V,
0 to 1.7 A
0 to 60 V,
0 to 1 A
Range 2
0 to 15 V,
0 to 2 A1
0 to 35 V,
0 to 0.85 A1
0 to 120 V,
0 to 0.25 A1
–
–
–
–
Power (max)
30 W
30 W
30 W
48 W
60 W
60 W
60 W
Load and line regulation
0.01% + 2 mV
0.01% + 2 mV
0.01% + 2 mV
0.01% + 2 mV
0.01% + 2 mV
0.01% + 2 mV
0.01% + 2 mV
Output ratings1
Ripple and noise from 20 Hz to 20 MHz
Constant voltage
<200 µVrms,
2 mVp-p
<200 µVrms,
2 mVp-p
<200 µVrms,
2 mVp-p
<200 µVrms,
1 mVp-p
<200 µVrms,
1 mVp-p
<200 µVrms,
1 mVp-p
<200 µVrms,
1 mVp-p
Constant current
<200 µArms,
1 mAp-p
<200 µArms,
1 mAp-p
<200 µArms,
1 mAp-p
<5 mArms
<2 mArms
<500 µArms
<500 µArms
Supplemental characteristics (Non-warranted characteristics determined by design and useful in applying the product)
Control mode
CV/CC
CV/CC
CV/CC
CV/CC
CV/CC
CV/CC
CV/CC
Voltage
Meter resolution
10 mV
100 mV
100 mV
10 mV
10 mV (0-20 V),
100 mV (>20 V)
10 mV (0-20 V),
100 mV (>20 V)
10 mV (0-20 V),
100 mV (>20 V)
Current (minimum change
using front-panel controls)
10 mA
10 mA
1 mA
10 mA
10 mA
1 mA
1 mA
1.
Maximum current is derated 1% per °C between 40 °C to 55 °C
4
Features
• Fully integrated overvoltage and overcurrent
protections
• Capability to save and recall up to three
memory states
U8001A, U8002A
• Keypad lock
• Physical lock mechanism
• LCD display with backlight on/off options
• Excellent load and line regulation
• Fast transient response
• Low output noise
The Agilent U8000 Series extends the functionality of non-programmable power supplies with features typical only in programmable models.
These power supplies provide fully integrated overvoltage and overcurrent protections to protect DUTs. Up to three frequently used operating
states can be stored to minimize manual errors and reduce setup time. Keypad lock prevents measurement errors due to accidental front
panel usage. The power supply can be secured at its place using the physical lock mechanism. This series comes with LCD display with
backlight on/off options that enables brighter display for data viewing.
With power performance of 90 W and 150 W, this series is well suited for a variety of electronics manufacturing applications and in educational labs.
Supplemental Characteristics
Ordering Information
Product regulation: Certified with CSA and meets requirements for CE and C-tick regulations
Warranty: One year
Size: U8001A-U8002A: 212.3 mm W x 88.1 mm H x 394.3 mm D (8.4 in. x 3.5 in. x 15.5 in.)
Weight: U8001A: 7.3 kg (16.1 lbs)
U8002A: 8.3 kg (18.3 lbs)
Opt 0E9 90 to 110 Vac, 47 to 63 Hz (Japan only)
Opt 0EM 104 to 126 Vac, 47 to 63 Hz
Opt 0E3 207 to 253 Vac, 47 to 63 Hz
Opt UK6 Commercial calibration with test
result data
Opt 1CM Rack mount kit
Specifications
Number of output
GPIB
Output rating
U8001A
U8002A
1
No
0 to 30 V
0 to 3 A
90 W
1
No
0 to 30 V
0 to 5 A
150 W
Power (max)
Load and line regulation
Voltage
<0.01% + 2 mV
<0.01% + 2 mV
Current
<0.02% + 2 mA
<0.02% + 2 mA
Ripple and noise from 20 Hz to 20 MHz
Constant voltage
<1 mVrms, 12 mVp-p
<1 mVrms, 12 mVp-p
Constant current
3 mArms
3 mArms
Programming accuracy at 25 °C ± 5 °C
Voltage
<0.35% + 20 mV
<0.35% + 20 mV
Current
<0.35% + 20 mA
<0.35% + 20 mA
Readback accuracy at 25 °C ± 5 °C
Voltage
<0.35% + 20 mV
<0.35% + 20 mV
Current
<0.35% + 20 mA
<0.35% + 20 mA
Meter resolution
Voltage
10 mV
10 mV
Current
10 mA
10 mA
Transient response
<50 µsec for output to recover to within 15 mV following a change in output current from full load to half load or vice versa
5
Single-output. Manual. 90 W and 150 W
Single-output. Manual. 90 W and 150 W
Multiple-output. Manual. 35 W and 50 W
Multiple-output. Manual. 35 W and 50 W
Features
• Dual and triple outputs
• Autotracking for outputs synchronization
• Overload indicator to monitor output
E3620A, E3630A
These linear-regulated DC power supplies provide reliable and convenient DC power on a lab bench. Voltage and current can be monitored
simultaneously on the front panel meters. There is also an overload indicator for each output.
E3620A
The E3620A has two isolated, independent, CV/CL 25 V outputs. It is easy to make precise adjustments using the 10-turn pots.
E3630A
The E3630A triple output power supply has two 20 V outputs and one 6 V output. The +6V output is an isolated constant-voltage/currentfoldback output, and both the +20 V output and the –20 V output are constant-voltage/current-limit. An autotracking feature lets you use one
voltage control to adjust both 20 V outputs. These outputs track each other to within one percent, making it easy to adjust the power supply
for circuits requiring balance voltages. The ±20 V outputs are referenced together to a floating common.
Supplemental Characteristics
Ordering Information
Size: E3620A: 213 mm W x 91 mm H x 401 mm D (8.4 in x 3.6 in x 15.8 in.)
E3630A: 213 mm W x 92 mm H x 320 mm D (8.4 in x 3.6 in x 12.6 in.)
Weight: E3620A: 5.5 kg (12.1 lbs)
E3630A: 3.8 kg (8.4 lbs)
Warranty: One year
Opt 0E9 90 to 110 Vac, 47 to 63 Hz (Japan only)
Opt 0EM 104 to 126 Vac, 47 to 63 Hz
Opt 0E3 207 to 253 Vac, 47 to 63 Hz
Opt 1CM Rack mount kit (E3620A only)
Opt 0L2 Extra documentation package
Specifications (at 0 °C to 55 °C unless otherwise specified)
E3620A
E3630A
Number of output
2
3
GPIB
No
No
Output 1
0 to 25 V, 0 to 1 A
0 to 6 V, 0 to 2.5 A2
Output 2
0 to 25 V, 0 to 1 A
0 to +20 V, 0 to 0.5 A
Output 3
–
0 to –20 V, 0 to 0.5 A
Power (max)
50 W
35 W
Load regulation
0.01% + 2mV
0.01% + 2mV
Output ratings2
Ripple and noise from 20 Hz to 20 MHz
Normal mode voltage rms
350 µV
350 µV
Peak-to-peak
1.5 mV
1.5 mV
Common mode current
1 µArms
1 µArms
Control mode
CV/CL
CV/CL (±20 V), CV/CF (6 V)
Meter resolution (minimun change using front-panel controls)
Voltage
10 mV (0-20 V), 100 mV, (>20 V)
10 mV
Current
1 mA
10 mA
Input power
115 Vac ± 10%, 47 to 63 Hz
115 Vac, ± 10%, 47 to 63 Hz
2.
Maximum current is derated 3.3% per °C between 40 °C to 55 °C
6
Features
• Output sequencing capability
• 375 W total power for three outputs
• Excellent load regulation (CV: < 0.01% +
2 mV; CC: < 0.02% + 2 mA)
• Provides clean output with ≤ 1 mVrms
(0.5 mVrms typical) noise
• Fast < 50 µs transient response for stable
testing
U8031A, U8032A
• Over-voltage and over-current protection
• Physical lock mechanism
Agilent extends its portfolio of bench power supplies to introduce the U8030 series - the only triple-output power supply in its class to offer output
sequencing that can be setup and generated right from its front panel without any computer programming. This practical function saves programming time and reduces complexity without requiring extensive programming skills.
Both models, the U8031A and U8032A, are built with excellent load regulation and clean output noise for continued stability. With a total output
power of 375 W for three outputs, the U8030 series is the ultimate power source alternative in electronics manufacturing, research and development
as well as education sector.
Supplemental Characteristics
Ordering Information
Product regulation: Certified with CSA and meets requirements for CE and C-tick regulations
Warranty: One year
Size: U8031A-U8032A: 212.3 mm W x 179.0 mm H x 379.0 mm D (8.4 in. x 7.0 in. x 14.9 in.)
Weight: 8.2 kg (18.1 lbs)
Opt 0E9 90 to 110 Vac, 47 to 63 Hz (Japan only)
Opt 0EM 104 to 126 Vac, 47 to 63 Hz
Opt 0E3 207 to 253 Vac, 47 to 63 Hz
Opt UK6 Commercial calibration with test
result data
Opt ABA English language user guide, printed
Opt ACF Japanese language user guide,
printed
Opt 1CM Rack mount kit
Specifications
Number of output
GPIB
Output rating
Output 1
Output 2
Output 3 (fixed)
Power (max)
Load and line regulation
Voltage
Current
Ripple and noise
Constant voltage
Constant current
Programming accuracy
Voltage
Current
Readback accuracy
Voltage
Current
Meter resolution
Voltage
Current
Transient response
U8031A
U8032A
3
No
3
No
0-30 V, 0-6 A
0-30 V, 0-6 A
5 V, 3 A
375 W
0-60 V, 0-3 A
0-60 V, 0-3 A
5 V, 3 A
375 W
<0.01% + 2 mV
<0.02% + 2 mA
<0.01% + 2 mV
<0.02% + 2 mA
≤1 mVrms, 0.5 mVrms (typical) or ≤10 mVpp, 5 mVpp (typical)
≤1 mArms
≤1 mArms
≤0.25% + 15 mV
≤0.30% + 15 mA
≤0.25% + 15 mV
≤0.30% + 15 mA
≤0.25% + 10 mV
≤0.25% + 10 mA
≤0.25% + 10 mV
≤0.25% + 10 mA
10 mV (4 digits)
10 mA (3 digits)
<50 µs
10 mV (4 digits)
10 mA (3 digits)
<50 µs
7
Triple-output. Manual. 375 W
Triple-output. Manual. 375 W
Triple-output. Programmable. 80 W
Triple-output. Programmable. 80 W
Features
• Programmable via GPIB and RS-232
• Autotracking for outputs synchronization
• Save/Recall up to three states
E3631A
This is the DC power supply for every engineer’s or electronic technician’s lab bench. It has two tracking 25 V outputs, which are together
referenced to a floating common, and an isolated 6 volt output. It is easy to control from the front panel, or with industry standard SCPI
commands via the GPIB or RS-232. VXIPlug&Play drivers are available to further simplify computer control. Up to 3 complete states can be
stored for later recall. The low noise, excellent regulation, and built-in voltmeter/ammeter make this reliable power supply well suited for the
needs of the R&D lab.
Supplemental Characteristics
Ordering Information
Product regulation: Designed to comply with UL1244, IEC 1010-1; certified with
CSA 22.2; meets requirements for CE regulation
Software Driver: IVI-COM
VXIPlug&Play
IntuiLink Connectivity Software
Warranty: One year
Size: E3631A: 213 mm W x 133 mm H x 348 mm D (8.4 in. x 5.2 in. x 14.2 in.)
Weight: 8.2 kg (18 lbs)
Opt 0E9 90 to 110 Vac, 47 to 63 Hz (Japan only)
Opt 0EM 104 to 126 Vac, 47 to 63 Hz
Opt 0E3 207 to 253 Vac, 47 to 63 Hz
Opt 1CM Rack mount kit
Opt 0L2 Extra documentation package
Specifications (at 0 °C to 55 °C unless otherwise specified)
E3631A
DC outputs
Voltage
0 to +25 V
0 to –25 V
0 to 6 V
Current
0 to 1 A
0 to 1 A
0 to 5 A
Voltage
<0.01% + 2 mV
<0.01% + 2 mV
<0.01% + 2 mV
Current
<0.01% + 250 µA
<0.01% + 250 µA
<0.01% + 250 µA
Load and line regulation
Ripple and noise from 20 Hz to 20 MHz
Normal-mode voltage
<350 µV rms/2 mV p-p
<350 µV rms/2 mV p-p
<350 µV rms/2 mV p-p
Normal-mode current
<500 µA rms
<500 µA rms
<2 mA rms
Common-mode current
<1.5 µA rms
<1.5 µA rms
<1.5 µA rms
Programming accuracy at 25 °C ± 5 °C
Voltage
0.05% + 20 mV
0.05% + 20 mV
0.1% + 5 mV
Current
0.15% + 4 mA
0.15% + 4 mA
0.2% + 10 mA
Readback accuracy at 25 °C ± 5 °C
Voltage
0.05% + 10 mV
0.05% + 10 mV
0.1% + 5 mV
Current
0.15% + 4 mA
0.15% + 4 mA
0.2% + 10 mA
Program/readback
1.5 mV, 0.1 mA
1.5 mV, 0.1 mA
0.5 mV, 0.5 mA
Meter
10 mV, 1 mA
10 mV, 1 mA
1 mV, 1 mA
Transient response
50 µsec for output to recover to within 15 mV following a change in output current from full load to half load or vice versa
Resolution
8
Features
• Dual-range outputs
• Remote sensing
• Front and rear output terminals
• Programmable via GPIB and RS-232
E3640A – E3645A
• Save/Recall up to five states
• Overvoltage protection (OVP) features
E3646A – E3649A
These isolated dual range DC power supplies provide the stable and reliable DC power that the manufacturing test system designer needs.
These models offer constant-voltage/constant-current outputs, so they can serve as either voltage or current sources. They can be used either
for manual or automated testing, and have VXIPlug&Play drivers to further simplify computer control.
The E3640A Series DC power supplies can be quickly integrated into a test system. Both front and rear panel terminals are provided for easy
wiring. Remote sensing eliminates the errors in voltage regulation due to voltage drops in the load leads. Delicate DUTs are protected by
overvoltage protection. Up to 5 operating states can be stored for later recall.
Supplemental Characteristics
Ordering Information
DC Floating Voltage: Output terminals can be floated up to ±240 Vdc from chassis ground
Remote Sensing: Up to 1 V can be dropped in each load lead. The drop in the load leads
subtracts from the voltage available for the load.
Settling Time: Less than 90ms for the output voltage to change from 1% to 99% or
vice versa following the receipt of VOLTage or APPLy command via direct GPIB or RS-232
interface.
Product regulation: Designed to comply with UL3111-1; certified to CSA 22.2 No. 1010.1;
conforms to IEC 1010-1; complies with EMC directive 89/336/EEC(Group1, Class A)
Software Driver: IVI-COM
VXIPlug&Play
IntuiLink Connectivity Software
Warranty: One year
Size: E3640A-E3645A: 213 mm W x 88 mm H x 348 mm D (8.4 in. x 3.5 in. x 13.7 in.)
E3646A-E3649A: 213 mm W x 133 mm H x 348 mm D (8.4 in. x 5.2 in. x 13.7 in.)
Weight: E3640A, E3641A: 5.3 kg (11.7 lbs)
E3642A, E3643A: 6.2 kg (13.7 lbs)
E3644A, E3645A: 6.7 kg (14.7 lbs)
E3646A, E3647A: 7.3 kg (16.1 lbs)
E3648A, E3649A: 9.2 kg (20.3 lbs)
Opt 0E3 207 to 253 Vac, 47 to 63 Hz
Opt 0E9 90 to 110 Vac, 47 to 63 Hz (Japan only)
Opt 0EM 104 to 126 Vac, 47 to 63 Hz
Opt 1CM Rack mount kit
(E3640A-E3645A p/n 5063-9240;
E3646A-E3649A p/n 5063-9243)
Opt 0L2 Extra documentation package
Opt 0B0 Delete documentation
9
Single and dual-output. Programmable. 30 W to 100 W
Single and dual-output. Programmable. 30 W to 100 W
Single and dual-output. Programmable. 30 W to 100 W
Specifications (at 0 °C to 55 °C unless otherwise specified)
E3640A
E3641A
E3642A
E3643A
E3644A
Number of output
1
1
1
1
1
GPIB
Yes
Yes
Yes
Yes
Yes
DC outputs
Voltage
0 to 8 V
0 to 35 V
0 to 8 V
0 to 35 V
0 to 8 V
Current
3A
0.8 A
5A
1.4 A
8A
Voltage
0 to 20 V
0 to 60 V
0 to 20 V
0 to 60 V
0 to 20 V
Current
1.5 A
0.5 A
2.5 A
0.8 A
4A
Power (max)
30 W
30 W
50 W
50 W
80 W
Load and line regulation
Voltage
<0.01% + 3 mV
<0.01% + 3 mV
<0.01% + 3 mV
<0.01% + 3 mV
<0.01% + 3 mV
Current
<0.01% + 250 µA
<0.01% + 250 µA
<0.01% + 250 µA
<0.01% + 250 µA
<0.01% + 250 µA
Ripple and noise from 20 Hz to 20 MHz
Normal-mode voltage
<500 µVrms, 5 mVp-p <1 mVrms, 8 mVp-p
<500 µVrms, 5 mVp-p <1 mVrms, 8 mVp-p
<500 µVrms, 5 mVp-p
Normal-mode current
<4.0 mArms
<4.0 mArms
<4.0 mArms
<4.0 mArms
<4.0 mArms
Common-mode current
<1.5 µArms
<1.5 µArms
<1.5 µArms
<1.5 µArms
<1.5 µArms
Programming accuracy at 25 °C ± 5 °C
Voltage
<0.05% + 10 mV
<0.05% + 10 mV
<0.05% + 10 mV
<0.05% + 10 mV
<0.05% + 10 mV
Current
<0.2% + 10 mA
<0.2% + 10 mA
<0.2% + 10 mA
<0.2% + 10 mA
<0.2% + 10 mA
Readback accuracy at 25 °C ± 5 °C
Voltage
<0.05% + 5 mV
<0.05% + 5 mV
<0.05% + 5 mV
<0.05% + 5 mV
<0.05% + 5 mV
Current
<0.15% + 5 mA
<0.15% + 5 mA
<0.15% + 5 mA
<0.15% + 5 mA
<0.15% + 5 mA
Program resolution
Voltage
5 mV
5 mV
5 mV
5 mV
5 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
Readback resolution
Voltage
2 mV
2 mV
2 mV
2 mV
2 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
Meter resolution
Voltage
10 mV
10 mV
10 mV
10 mV
10 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
Transient response
<50 µsec for output to recover to within 15 mV following a change in output current from full load to half load or vice versa.
E3645A
E3646A
E3647A
E3648A
E3649A
Number of output
1
2
2
2
2
GPIB
Yes
Yes
Yes
Yes
Yes
DC outputs
Voltage
0 to 35 V
0 to 8 V
0 to 35 V
0 to 8 V
0 to 35 V
Current
2.2 A
3A
0.8 A
5A
1.4 A
Voltage
0 to 60 V
0 to 20 V
0 to 60 V
0 to 20 V
0 to 60 V
Current
1.3 A
1.5 A
0.5 A
2.5 A
0.8 A
Power (max)
80 W
60 W
60 W
100 W
100 W
Load and line regulation
Voltage
<0.01% + 3 mV
<0.01% + 3 mV
<0.01% + 3 mV
<0.01% + 3 mV
<0.01% + 3 mV
Current
<0.01% + 250 µA
<0.01% + 250 µA
<0.01% + 250 µA
<0.01% + 250 µA
<0.01% + 250 µA
Ripple and noise from 20 Hz to 20 MHz
Normal-mode voltage
<1 mVrms, 8 mVp-p
<500 µVrms, 5 mVp-p <1 mVrms, 8 mVp-p
<500 µVrms, 5 mVp-p <1 mVrms, 8 mVp-p
Normal-mode current
<4.0 mArms
<4.0 mArms
<4.0 mArms
<4.0 mArms
<4.0 mArms
Common-mode current
<1.5 µArms
<1.5 µArms
<1.5 µArms
<1.5 µArms
<1.5 µArms
Programming accuracy at 25 °C ± 5 °C
Voltage
<0.05% + 10 mV
10 mV
10 mV
10 mV
10 mV
(<0.1% + 25 mV for output 2)
Current
<0.2% + 10 mA
10 mA
10 mA
10 mA
10 mA
Readback accuracy at 25 °C ± 5 °C
Voltage
<0.05% + 5 mV
5 mV
5 mV
5 mV
5 mV
(<0.1% + 25 mV for output 2)
Current
<0.15% + 5 mA
5 mA
5 mA
5 mA
5 mA
(<0.15% + 10 mA for output 2)
Program resolution
Voltage
5 mV
5 mV
5 mV
5 mV
5 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
Readback resolution
Voltage
2 mV
2 mV
2 mV
2 mV
2 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
Meter resolution
Voltage
10 mV
10 mV
10 mV
10 mV
10 mV
Current
1 mA
1 mA
1 mA
1 mA
1 mA
Transient response
<50 µsec for output to recover to within 15 mV following a change in output current from full load to half load or vice versa.
Maximum current is derated 3.3% per °C between 40 °C to 55 °C
10
Features
• Dual-range outputs
• Remote sensing
• Front and rear output terminals
(E3633A/34A)
• Programmable via GPIB and RS-232
• Save/Recall up to three states
E3632A-E3634A
• Overvoltage and overcurrent protection
features
These dual range DC power supplies provide the stable, accurate, and reliable DC power that the R&D engineer needs. These models are
CV/CC, so they can serve as either voltage or current sources. They can be used either for manual or automated testing where moderate
speed and accuracy are required. VXIPlug&Play drivers further simplify computer control.
These DC power supplies have many features to help the R&D engineer to quickly and easily bias and monitor prototype circuitry. Remote sensing
eliminates the errors in voltage regulation due to voltage drops in the load leads. Delicate prototypes are protected by overvoltage and overcurrent
protection features. Up to 3 frequently used operating states may be stored for later recall. The output is isolated from chassis ground.
Supplemental Characteristics
Ordering Information
Product regulation: Designed to comply with UL1244, IEC 1010-1; certified with
CSA 22.2; meets requirements for CE regulation
Software Driver: IVI-COM
VXIPlug&Play
IntuiLink Connectivity Software
Warranty: One year
Size: E3632A-E3634A: 213 mm W x 133 mm H x 348 mm D (8.4 in. x 5.2 in. x 13.7 in.)
Weight: 9.5 kg (21 lbs)
Opt 0E9 90 to 110 Vac, 47 to 63 Hz (Japan only)
Opt 0EM 104 to 126 Vac, 47 to 63 Hz
Opt 0E3 207 to 253 Vac, 47 to 63 Hz
Opt 1CM Rack mount kit
Opt 0L2 Extra documentation package
Specifications (at 0 °C to 55 °C unless otherwise specified)
E3632A
E3633A
E3634A
Number of outputs
1
1
1
GPIB
Yes
Yes
Yes
Output ratings
Range 1
0 to 15 V, 7 A
0 to 8 V, 20 A
0 to 25 V, 7 A
Range 2
0 to 30 V, 4 A
0 to 20 V, 10 A
0 to 50 V, 4 A
Load and line regulation
Voltage
<0.01% + 2 mV
<0.01% + 2 mV
<0.01% + 2 mV
Current
<0.01% + 250 µA
<0.01% + 250 µA
<0.01% + 250 µA
Ripple and noise from 20 Hz to 20 MHz
Normal-mode voltage
<350 µVrms/2 mVpp
<350 µVrms/3 mVpp
<500 µVrms/3 mVp-p
Normal-mode current
<2 mA rms
<2 mA rms
<2 mA rms
Common-mode current
<1.5 µA rms
<1.5 µA rms
<1.5 µA rms
Programming accuracy at 25 °C ± 5 °C
Voltage
0.05% + 10 mV
0.05% + 10 mV
0.05% + 10 mV
Current
0.2% +10 mA
0.2% +10 mA
0.2% +10 mA
Readback accuracy at 25 °C ± 5 °C
Voltage
0.05% + 5 mV
0.05% + 5 mV
0.05% + 5 mV
Current
0.15% + 5 mA
0.15% + 5 mA
0.15% + 5 mA
Resolution
Program
1 mV, 0.5 mA
1 mV, 1 mA
3 mV, 0.5 mA
Readback
0.5 mV, 0.1 mA
0.5 mV, 1 mA
1.5 mV, 0.5 mA
Meter
1 mV, 1 mA
1 mV, 1 mA (<10 A/10 mA (≥10 A))
1 mV, 1 mA (<10 A/10 mA (≥10 A))
Transient response
50 µsec for output to recover to within 15 mV following a change in output current from full load to half load or vice versa
11
Single-output. Programmable. 120 W to 200 W
Single-output. Programmable. 120 W to 200 W
Measurement Automation—Quick and Easy
www.agilent.com
Whatever instrument you’re programming—whether an RF analyzer, oscilloscope, power supply
or DMM—Agilent VEE graphical language software and I/O connectivity provide you the ease and
flexibility to set up and automate the way you want for your application need. Make measurements
quickly, easily and affordably today.
For more information on Agilent Technologies’
products, applications or services, please contact
your local Agilent office. The complete list is
available at:
www.agilent.com/find/contactus
Measurement automation program in Agilent VEE and Agilent I/O hardware
www.agilent.com/find/io
www.agilent.com/find/vee
Instruments
Related Agilent Literature
Publication title
Pub number
Understanding Linear Power Supply Operation Application Note 1554
5989-2291EN
Specifying and Buying a Bench Power Supply Application Note
5989-5278EN
Choosing the Right DC System Power Supply Selection Guide
5988-1024EN
10 Practical Tips You Need to Know About Your Power Products Brochure
5965-8239E
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
(11) 4197 3500
01800 5064 800
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 375 8100
Europe & Middle East
Belgium
32 (0) 2 404 93 40
Denmark
45 70 13 15 15
Finland
358 (0) 10 855 2100
France
0825 010 700*
*0.125 €/minute
Germany
49 (0) 7031 464 6333
Ireland
1890 924 204
Israel
972-3-9288-504/544
Italy
39 02 92 60 8484
Netherlands
31 (0) 20 547 2111
Spain
34 (91) 631 3300
Sweden
0200-88 22 55
United Kingdom
44 (0) 131 452 0200
For other unlisted countries:
www.agilent.com/find/contactus
Revised: June 8, 2011
Data sheet, application notes and more at
www.agilent.com/find/basicpowersupply
Get a quick quote in two minutes when you
visit www.agilent.com/find/quotation
Product specifications and descriptions in this
document subject to change without notice.
© Agilent Technologies, Inc. 2008, 2011
Published in USA, December 14, 2011
5989-4104EN