SCH-r410 Series
P O R T A B L E
M O B I L E
D U A L - M O D E
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein St.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2007 Samsung Telecommunications America, LLC is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System
(Automated Response System) at:
www.samsungwireless.com/support
GH68-15751A
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5,
107, 225; 5, 109, 390.
Printed in Korea.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.
5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending.
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
r410.07_AI18_CB_101609_F3
Table of Contents
Section 1: Getting Started ..........................................................................4
Understanding this User Manual ...............................................................................4
Installing the Battery .................................................................................................5
Charging the Battery .................................................................................................6
Activating Your Phone ...............................................................................................7
Section 2: Understanding Your Phone .......................................................9
Features of Your Phone .............................................................................................9
Closed View of Your Phone .....................................................................................10
Open View (Front) of Your Phone .............................................................................12
Closed Rear View of Your Phone .............................................................................14
Command Keys ......................................................................................................15
Understanding the Display Screen ..........................................................................16
Your Phone’s Modes ...............................................................................................18
Section 3: Call Functions ..........................................................................22
Making a Call ..........................................................................................................22
Answering a Call .....................................................................................................26
Calls .......................................................................................................................29
Section 4: Menu Navigation .....................................................................36
Menu Navigation .....................................................................................................36
Menu Shortcuts ......................................................................................................37
Navigation Key Shortcuts ........................................................................................37
Navigate Using a Shortcut .......................................................................................38
Menu Outline ..........................................................................................................38
Section 5: Entering Text ...........................................................................44
Built-in QWERTY Keypad .........................................................................................45
Changing the Text Entry Mode ................................................................................45
Using T9® Mode (Phone Keypad Only) ...................................................................46
Using Abc Mode ......................................................................................................47
Entering Numbers ...................................................................................................47
Entering Symbols ....................................................................................................48
Section 6: Understanding Your Contacts .................................................49
Contacts .................................................................................................................49
Finding a Contacts Entry .........................................................................................50
Adding a New Contacts Entry ..................................................................................52
Editing a Contacts Entry ..........................................................................................53
Saving a Number After a Call ..................................................................................57
Speed Dial ..............................................................................................................59
Contacts Groups .....................................................................................................61
Deleting a Contacts Entry ........................................................................................64
Memory Info ...........................................................................................................64
1
Section 7: @metro ................................................................................... 66
Accessing @metro (Mobile Shop) ............................................................................66
Section 8: Messaging .............................................................................. 69
Types of Messages .................................................................................................70
Create and Send Text Messages .............................................................................70
Receive Text Messages ...........................................................................................71
Send Picture Messages in Camera Mode ................................................................71
Send Picture Messages in Standby Mode ................................................................73
Receive Picture Messages ......................................................................................75
Message Boxes .......................................................................................................76
Erase Messages ......................................................................................................83
Message Settings ...................................................................................................83
Section 9: MetroWEB ............................................................................... 86
MetroWEB ...............................................................................................................86
Launching MetroWEB ..............................................................................................86
Using MetroWEB .....................................................................................................87
Using Links .............................................................................................................87
How MetroWEB Keys Work ......................................................................................88
Section 10: Voice SVC .............................................................................. 89
Voice SVC Options ...................................................................................................89
Voice Command ......................................................................................................90
Voice Settings .........................................................................................................91
Section 11: Multimedia ............................................................................ 95
Camera ...................................................................................................................96
Using My Images Gallery .......................................................................................103
Using My Ringtones Gallery ...................................................................................104
Using My Sounds Gallery ......................................................................................104
Section 12: Tools .................................................................................... 106
Accessing Your Phone’s Tools ...............................................................................106
Bluetooth ..............................................................................................................106
Calendar ...............................................................................................................109
Memo Pad ............................................................................................................112
Alarm Clock ..........................................................................................................113
World Time ...........................................................................................................115
Calculator .............................................................................................................116
Stop Watch ...........................................................................................................117
Converter ..............................................................................................................118
Tip Calculator ........................................................................................................120
Section 13: Settings ............................................................................... 122
Accessing Your Phone’s Settings ..........................................................................122
Location Setting ....................................................................................................122
Display Settings ....................................................................................................123
Sound Settings .....................................................................................................126
Call Settings .........................................................................................................128
Table of Contents
2
Phone Settings .....................................................................................................131
Memory Info .........................................................................................................139
Phone Info ............................................................................................................140
Section 14: Health and Safety Information ............................................141
Health and Safety Information ...............................................................................141
Samsung Mobile Products and Recycling ..............................................................143
UL Certified Travel Adapter ...................................................................................143
Consumer Information on Wireless Phones ...........................................................143
Road Safety ..........................................................................................................150
Responsible Listening ...........................................................................................151
Operating Environment .........................................................................................153
Using Your Phone Near Other Electronic Devices ...................................................153
Potentially Explosive Environments .......................................................................155
Emergency Calls ...................................................................................................156
FCC Notice and Cautions .......................................................................................157
Other Important Safety Information .......................................................................157
Product Performance ............................................................................................ 158
Availability of Various Features/Ring Tones ...........................................................159
Battery Standby and Talk Time .............................................................................159
Battery Precautions ..............................................................................................159
Care and Maintenance ..........................................................................................161
Section 15: Warranty Information ..........................................................162
Standard Limited Warranty ...................................................................................162
3
Understanding this User Manual
Section 1: Getting Started
Topics Covered
• Understanding this User Manual
• Installing the Battery
• Charging the Battery
• Activating Your Phone
This section explains how to start using your SCH-r410 phone by activating your
service, setting up your Voicemail, or getting an understanding of how this manual
is put together.
Understanding this User Manual
The chapters of this guide generally follow the same order as the menus and submenus in your phone. A robust index for quick reference to most features begins on
page 167.
Also included is important safety information that you should know before using your
phone. Most of this information is near the back of the guide, beginning on page
141.
Notes and tips
Throughout this guide there is text that is set apart from the rest. These are intended
to point out important information, quick methods for activating features, to define
terms, and more. The definitions for these methods are as follows:
• Notes: Explain alternative options within the current feature, menu, or sub-menu.
• Tips: Provide quick or innovative methods for performing functions related to the
subject at hand.
• Important: Points out important information about the current feature that could
affect performance, or even damage your phone.
Getting Started
4
Installing the Battery
Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel
adapter.
Important!: You must fully charge the battery the first time you use your phone, otherwise you could
damage the battery.
1.
Insert the top end of the battery first, matching
the gold contacts on the inside of the battery to
those on the phone.
2.
Press lightly on the bottom end of the battery
down into the phone until it slips into place.
3.
Press lightly down and inward on the
bottom of the battery cover.
4.
Press lightly on the top end of the battery
down over the battery until it clicks into
place.
3
4
Remove the Battery
5
1.
Press and hold the
2.
Press down on the battery cover release
latch (1) and slide the cover (2) toward the
bottom end of the phone.
key to turn off the phone (if on).
Charging the Battery
3.
Lift the battery (3) up and away from the phone,
bottom end first.
3
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery. Only use
Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Use of other accessories may invalidate your
warranty and may cause damage.
Use the Travel Adapter
The travel adapter included with your phone is a
convenient, light-weight charger that rapidly
charges your phone from any 120/220 VAC outlet.
1.
Plug the large end of the Travel Adapter
into a standard 120 VAC or 220 VAC wall
outlet.
Important!: For connection to an electrical supply not located in North America, you must use an adaptor
of the proper configuration for the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2.
Insert the smaller end of the Travel
Adapter into the charger/accessory
connector at the bottom end of your
phone.
Correct
+
Incorrect
Important!: You must unplug the adapter before removing the battery from the phone during charging to
avoid damage.
Getting Started
6
Low battery indicator
The battery indicator (
) in the upper-right corner of the display indicates power
level. Monitor the battery strength and ensure your battery is adequately charged.
• Three bars (
) indicate a full charge.
• An empty battery icon (
) indicates a near empty battery.
• A blinking empty battery icon (
) and a tone sounding indicate you have two to
three minutes before the battery is too low to operate the phone.
If you continue to use your phone without charging its battery, the phone will shut
down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for obtaining service, if
necessary. We suggest that you read this guide to fully understand the services your
phone supports.
Turning Your Phone On
1.
Press and hold the
key until the display lights.
Note: As with any other radio-transmitting device, do not touch the antenna while using your phone as this
can affect call quality and can cause the phone to operate at a higher power level than is necessary.
2.
The phone begins searching for a network signal.
3.
Once the phone finds a signal, the time, date, and day appear near the top
of the display.
4.
You’re now ready to place and receive calls.
Note: If you are outside of your carrier’s coverage or roaming area, the No Service icon (
) appears at
the top of the phone’s display. If you cannot place or receive calls, try later when service is available,
or at another location.
Turn Your Phone Off
䊳
Press and hold the
off.
key for two or more seconds. Your phone powers
Note: If your phone is on and you press
for less than one second, the phone will not power off. This
prevents your phone from being turned off accidentally.
7
Activating Your Phone
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be retrieved any time.
Note: Once your Voicemail account has been set up, you can use the Voicemail folder (under the Message
menu) to view details of voice messages in your Voicemail box.
1.
In standby mode, press and hold the
key, or the
your own mobile number to dial Voicemail.
key, or dial
2.
Follow the prompts in the new user tutorial to setup your mail box.
Listen to Voicemail
1.
In standby mode, press and hold the
key, or the
key, or dial
your own mobile number to dial Voicemail. After connecting, you will hear
your voice greeting.
2.
You are prompted to enter your password.
Getting Started
8
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Closed View of Your Phone
• Open View (Front) of Your Phone
• Closed Rear View of Your Phone
• Command Keys
• Understanding the Display Screen
• Your Phone’s Modes
This section outlines some key features of your phone. It also describes the screen
format and the icons that will be displayed when the phone is in use.
Features of Your Phone
• Domestic and international voice and text messaging service (available on
participating networks).
• High speed data (CDMA 2000 1x Technology)
• Bluetooth® Wireless Technology
• Global Positioning (GPS) Technology
• PIM Functions
• Picture (MMS) Messaging
• Text (SMS) Messaging
• E-mail Messaging
• QWERTY Keypad
• Built-in VGA Digital Camera
• Voice Dial
• Speakerphone
** The SCH-r410 supports the wireless handsfree profile and the serial port profile for
Bluetooth® wireless technology. The SCH-r410 does not support Bluetooth OBEX profiles.
9
Closed View of Your Phone
Closed View of Your Phone
1. Earpiece
18. Volume Key
2. Display
17. Power Accessory
Connector
16. OK Key
3. Navigation Key
15. Right Soft Key
4. Left Soft Key
5. Speakerphone
Key
6. SEND Key
OK
14. CLR Key
13. Camera Key
12. END Key
7. Voicemail Key
11. Alpha-numeric
Keys
8. Special Function
Keys
10. Voice Recognition
Key
9. Microphone
Features
1.
Earpiece / Speaker — Lets you hear ringing and alert tones, alarm tones,
and the other parties to calls.
2.
Display — Indicates the status of your phone, including numbers dialed,
feature and function screens, status icons, message indicators, signal
strength, and so on.
3.
Navigation Key — In Menu mode, lets you scroll through the phone menu
options. In Standby mode, lets you access preset functions.
4.
Left Soft Key — Used to navigate through menus and applications and to
select the choice indicated at the bottom left corner of the Main LCD.
5.
Speakerphone Key — Lets you enable/disable speakerphone mode.
Understanding Your Phone
10
6.
SEND Key — Lets you place or receive a call. In standby mode, press the
key once to access the recent call log.
7.
Voicemail Key — Lets you speed dial your Voicemail account to review
your voice messages.
8.
Special Function Keys — Enter special characters. Performs various
functions.
9.
Microphone — Lets the other party to a call hear you clearly when you
are speaking to them.
10. Voice Recognition Key — In standby mode, pressing and holding this key
launches VoiceSignal options.
11. Alpha-numeric Keys — Use these keys to enter numbers, letters, and
characters.
12. END Key — Ends a call. If you press and hold the END key, the power goes
On or Off. When you receive an incoming call, press to send the call to
voicemail.
13. Camera Key — Launches the Camera feature of your phone.
14. CLR Key — Deletes characters from the display when you are in text entry
mode. Press this key to return to the previous menu or screen when
navigating features on your phone.
15. Right Soft Key — Used to navigate through menus and applications and
to select the choice indicated at the bottom right corner of the Main
Display.
16. OK Key — Pressing when navigating through a menu accepts the
highlighted choice in a menu.
17. Power/Accessory Connector — Used to plug in charging accessories
and to connect a headset or any available accessory cables to your phone.
18. Volume Key — Lets you adjust the ring volume in standby mode, adjust
the voice volume during a call, or mute the ringer during an incoming call.
11
Open View (Front) of Your Phone
Open View (Front) of Your Phone
1. Volume Key
19. END Key
18. Navigation Key
17. Microphone
2. Earpiece/
Speaker
3. Display
16. Speakerphone Key
15. SEND Key
4. Voicemail Key
14. Voice Recognition
Key
13. CLR Key
5. Text Function Keys
12. New Line Key
11. OK Key
10. Right Soft Key
6. Left Soft Key
9. Arrow Keys
7. Special Function
Keys
8. SPACE Keys
Features
1.
Volume Key — Lets you adjust the ring volume in standby mode, adjust
the voice volume during a call, or mute the ringer during an incoming call.
2.
Earpiece / Speaker — Lets you hear ringing and alert tones, alarm tones,
and the other parties to calls.
3.
Display — Indicates the status of your phone, including numbers dialed,
feature and function screens, status icons, message indicators, signal
strength, and so on.
4.
Voicemail Key — Lets you speed dial your Voicemail account to review
your voice messages.
5.
Text Function Keys — Function (Fn) key toggles text entry mode between
ABC and 123 modes. SHIFT key toggles ABC mode capitalization between
ABC, Abc, and abc.
6.
Left Soft Key — Used to navigate through menus and applications and to
select the choice indicated at the bottom left corner of the Main LCD.
7.
Special Function Keys — Enter special characters. Perform various
functions.
8.
SPACE Key — Inserts a space character in a text entry.
9.
Arrow Keys — In Menu mode, lets you scroll through the phone menu
options. In Standby mode, lets you access preset functions and one userdefined function.
Understanding Your Phone
12
10. Right Soft Key — Used to navigate through menus and applications and
to select the choice indicated at the bottom right corner of the Main
Display.
11. OK Key — Pressing when navigating through a menu accepts the
highlighted choice in a menu.
12. New Line Key — In text entry mode, ends the current text line and starts
a new line.
13. CLR Key — Deletes characters from the display when you are in text entry
mode. Press this key to return to the previous menu or screen when
navigating features on your phone.
14. Voice Recognition Key — In standby mode, pressing and holding this key
launches VoiceSignal options.
15. SEND Key — Lets you place or receive a call. In standby mode, press the
key once to access the recent call log.
16. Speakerphone Key — Lets you enable/disable speakerphone mode.
17. Microphone — Lets the other caller hear you clearly when you are
speaking to them.
18. Navigation Key — In Menu mode, lets you scroll through the phone menu
options. In Standby mode, lets you access preset functions and one userdefined function.
19. END Key — Ends a call. If you press and hold the END key, the power goes
On or Off. When you receive an incoming call, press to send the call to
voicemail.
13
Closed Rear View of Your Phone
Closed Rear View of Your Phone
1. Speaker
Grill
7. Camera Key
6. Battery Cover
5. Power Accessory
Connector
4. Camera Lens
3. Mirror
2. Volume Key
1.
Speaker Grill — Lets you hear ringing and alert tones, alarm tones, and
the other parties to calls.
2.
Volume Key — Lets you adjust the ring volume in standby mode, adjust
the voice volume during a call, or mute the ringer during an incoming call.
3.
Mirror — Lets you position the Camera Lens to take self portraits.
4.
Camera Lens — The lens of your built-in camera.
5.
Power/Accessory Connector — Used to plug in charging accessories
and to connect a headset or any available accessory cables to your phone.
6.
Battery Cover — Lets you access your phone’s battery.
7.
Camera Key — Launches the Camera feature of your phone.
Understanding Your Phone
14
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the Left soft key
and the Right soft key
.
Left Soft Key
Some functions of the Left soft key are as follows.
• In standby mode, press the MENU (left) soft key (
) to open the main menu.
• When the Left soft key function is Edit, press the Edit (left) soft key (
) to edit
a Contact.
Right Soft Key
Some functions of the Right soft key are as follows.
• In standby mode, press the @metro (Right) soft key (
) to launch the @metro
screen.
• When the Right soft key function is Options, press the Options (right) soft key
(
) and a pop-up menu appears.
• When the Right soft key function is Back, press the Back (right) soft key (
) to
back up one menu level.
OK Key
• In a menu, press the OK key ( OK ) to accept the highlighted selection.
• In camera mode, press the OK key ( OK ) to take a photo or to create a Picture
message.
• When the OK key function is Edit, press the Edit (OK) key ( OK ) to edit a Draft
message.
Clear Key
The CLR key (
) is used to erase or clear numbers, text, or symbols from the
display. You can also use the
key to return to a previous menu.
15
1.
If you enter an incorrect character, briefly press
delete) the character.
2.
To erase the entire sentence, press and hold
3.
To back up one menu level, briefly press
to backspace (and
.
.
Understanding the Display Screen
End Key
1.
Press and hold the End key
2.
Briefly press
3.
Press
input.
to turn on your phone.
once to disconnect a call.
to return to standby mode from any menu, or to cancel the last
Send Key
The Send key
is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
1.
Press
2.
Enter a number and briefly press
once to answer calls.
3.
Briefly press
in standby mode to display a list of recent calls to and
from your phone.
4.
Press
5.
Press
to pick up a waiting call. Press
the other call.
to make a call.
twice in standby mode to call the most recent number.
again to switch back to
Navigation Key
Use the directional keys on the Navigation key OK
to browse menus, submenus, and lists. Each directional key also acts as a shortcut to launch applications.
Camera Key
Use the Camera key (
) on the right side of the phone to activate the camera
built into your phone and to take pictures.
Understanding the Display Screen
1.
The top line of your phone’s display
contains icons that indicate network
status, battery power, signal strength,
connection type, and more.
1
2.
The center portion of the display shows
information such as call progress
information, messages, and photos.
2
3
Understanding Your Phone
16
3.
The bottom line of the display shows current soft key functions. The
sample screen shows that pressing the Left soft key (
) will display the
Main Menu and pressing the Right soft key (
) will show the @metro
screen.
With the QWERTY keypad open, the
display rotates automatically from
portrait mode (as shown above) to
landscape mode (as shown here).
Display Screen Icons
1
2
Your SCH-r410 phone can show you
definitions of the icons that appear
on the top line of the display.
To access the Icon Glossary:
䊳
3
In standby mode, press the MENU (left) soft key (
), then press
(for Settings),
(for Phone Info), and
for Icon Glossary. A
list shows of the icons that can appear on the top line of the displays.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn of situations such as
low battery. Dialogue boxes and their definitions are outlined below.
• Choice
• Example: “Save Message?”
• Reconfirm
• Example: “Erase All Messages?”
• Performing
• Example: “Sending...” “Connecting...”
• Completed
• Example: “Message Saved”
• Information
• Example: “New Message”
• Error
• Example: “System Error!”
• Warning
• Example: “Low Battery,” “Memory Full!”
17
Your Phone’s Modes
Backlights
Backlights illuminate the display and the keypad. When you press any key or open
the phone, the backlights come on. They go off when no keys are pressed within a
period of time set in the Backlight menu.
Note: During a phone call, the display backlight dims and turns off after 10 seconds to conserve battery
power, regardless of the Backlight setting.
See “Backlight” on page 126 for more information.
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except the
key or
key, by pressing only the
key, or by opening the phone’s slide. (For more
information, see "Call Answer" on page 128..)
Input mode
Input mode determines how you enter text, numbers, and symbols. While at any text
entry screen, press the Left soft key (
), then choose the input mode from the
pop-up menu using the Navigation key. Optional input modes are T9 Word, Abc,
ABC, Symbol, and 123. (See “Entering Text” on page 44 for more information.)
Note: With the QWERTY keypad open, T9 Word is not available. Also, use 123 mode instead of Symbol to
enter symbols and punctuation in your text.
Tip: With the phone closed, you can also cycle between T9 Word, Abc, and 123 by repeatedly pressing and
holding the
key until the phone beeps.
Lock Mode
When the phone is in Lock Mode, restrictions are placed on phone use. You can
receive calls and messages, but cannot place outgoing calls (except for emergency
numbers) until you unlock the phone. Lock Mode also restricts access to menus and
the volume key. Unlock your phone by entering the lock code when prompted. (See
“Change Lock” on page 133 for more information.)
Keypad Lock Mode
When the phone is in Keypad Lock Mode, most of the keys are disabled. This
prevents accidental dialing, when you are carrying the phone. Unlock your phone by
pressing the Unlock (left) soft key (
) followed by pressing the
key.
Understanding Your Phone
18
Tip: You can also unlock your phone by opening the QWERTY keypad.
Note: For more information, see "Auto Key Lock" on page 139..
Standby Mode
Standby mode is the state of the phone once it has found service and is idle. The
phone goes into standby mode:
• After you power the phone on.
• When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as all phone status
icons.
Place Calls in Standby Mode
1.
While in standby mode, enter a phone number, and press
call.
2.
Press
to place a
to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds and a notification
message appears in the display when a new message arrives. The following call
message options appear:
• View Now — This selection allows you to view the messages now.
• View Later — This selection allows you to view the messages at a later date.
䊳 Highlight the desired viewing option and then press OK .
Talk Mode
You can place and receive calls only when your phone is on. While in a call your
phone is in talk mode. Press the Options (right) soft key (
) to display a list of
menu options. (See “In-Use Menu” on page 29 for more information.)
Speakerphone Mode
To use your phone handsfree or to share a call with other people nearby, place your
phone in Speakerphone Mode by pressing and holding the Speakerphone key
(
) until “Speakerphone On” appears in the display.
Caution!: Keep the phone away from you ear while in Speakerphone Mode. (For more information, see
"Responsible Listening" on page 151..)
19
Your Phone’s Modes
To disable Speakerphone Mode, press and hold
appears in the display.
until “Speakerphone Off”
Note: Your phone automatically enters Speakerphone Mode when you dial a call using the QWERTY keypad
and the called phone begins ringing.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
• To enter Silent Mode:
䊳
In standby mode, press and hold
. “Entering Silent Mode” briefly
appears in the display and your phone returns to standby mode.
• To exit Silent Mode:
䊳
While in Silent mode and standby mode, press and hold
. “Exit
Silent Mode” briefly appears in the display and your phone returns to
standby mode.
Vibrate Mode
䊳
In standby mode, repeatedly press the volume key (
appears in the display.
) down until Vibrate
The volume key is on the upper right side of phone.
Adjust the Ringer
1.
In standby mode, press the volume key (
up or down. Options are:
•
•
•
•
2.
Ringer Off
Vibrate
Low
Low/Medium
•
•
•
•
) on the right side of the phone
Medium
Medium/High
High
Vibrate/High
When you are satisfied with the setting, press the
returns to standby mode.
OK
key. Your phone
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the MENU (left) soft key (
),
then pressing the
,
,
, and
keys. Use the Volume key on the right
side of your phone to adjust the ringer volume setting.
Note: The Vibrate icon (
) appears in the display when the phone is in Vibrate mode. The Vibrate/
Ring icon (
) appears in the display when the phone is in Vibrate/High mode.
Understanding Your Phone
20
Camera Mode
Camera mode lets you activate your phone’s camera to take pictures. In Camera
mode, you can also adjust the resolution and appearance of your pictures.
See “Multimedia” on page 95 for more information.
• Entering Camera Mode — In standby mode, press the Camera key (
on the right side of the phone.
• Exiting Camera Mode — Press the
key.
21
)—
Making a Call
Section 3: Call Functions
Topics Covered
• Making a Call
• Answering a Call
• Calls
This section provides procedures for making and answering calls. This section also
describes features, such as call logs and call timers, that help you make calls and
manage your call time.
Note: Although the procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
Making a Call
1.
With the phone on, enter the number you wish to call using the keypad.
2.
Press
to place the call.
Emergency Calls
When you call an Emergency Number, such as 911, your SCH-r410 phone locks
itself in emergency mode, only allowing you to make calls to the emergency call
center you originally contacted. This enables emergency operators to more easily
dispatch aid, such as police, fire fighting, and emergency medical personnel.
1.
With the phone on, enter the Emergency Number you wish to call using the
keypad.
Note: You can define up to 3 emergency numbers in your phone. (For more information, see "Emergency #"
on page 133..)
2.
Press
to place the call.
Tip: If you need to make an emergency (911) call with Airplane mode enabled, just dial the emergency
number and press
. (For more information, see "Airplane Mode" on page 131..)
Call Functions
22
Three-way Calling
Call two other numbers and connect them to your call using three-way calling.
1.
In standby mode, enter the number for the first party in your call, then
press
.
2.
When connected, ask the other party to remain on the line. Press
place them on hold.
3.
Enter the second party’s phone number and press
4.
When the second party answers, press
to
.
to connect all three parties.
Manual Pause Calling
To manually call a number with pause(s) without storing it in your Contacts list:
1.
In standby mode, enter the number you wish to call.
Press the Options (right) soft key (
or
). The following pause
options appear in the display:
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
3. Use the Up/Down navigation or arrow keys to highlight the desired pause.
2.
4.
Press the OK key or
number sequence.
5.
Press
key to enter the highlighted pause into the
to call the number.
Tip: Press the Save (left) soft key (
the number frequently.
or
) to store pauses along with the number if you plan to call
Speed Dialing
Speed Dialing lets you place a call to any Contact stored in your Contacts list by
dialing the Contact’s Location number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail) through 9.
䊳
In standby mode, press and hold the number key corresponding to the
desired Contact’s speed dial number.
Example: To speed dial the Contact assigned speed dial 5, press and hold the
key.
23
key or the
Making a Call
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1.
In standby mode, press and release the number key representing the first
digit of the desired Contact’s speed dial number.
2.
Press and hold the number key representing the second digit of the
desired Contact’s speed dial number.
Example: To speed dial the Contact assigned speed dial 35, press
the
key or the
key.
or
then press and hold
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1.
In standby mode, press and release the number key representing the first
digit of the desired Contact’s speed dial number.
2.
Press the number key representing the second digit of the desired
Contact’s speed dial number.
3.
Press and hold the number key representing the third digit of the desired
Contact’s speed dial number.
Example: To speed dial the Contacts entry assigned to speed dial 325, press
or
, then press and hold the
key or the
or
, press
key.
Voice Dialing
The voice recognition capabilities of your SCH-r410 are exceptional due to
advanced, speaker-independent technology. This means you do not need to “train”
your phone to understand your voice. You can use your voice in a natural manner to
dial numbers.
Note: End Calls Before relaunching the VoiceSignal voice recognition software — When you use
Voice Dialing to make a call, you must end that call before you can use other Voice Commands. See
“Voice SVC” on page 89 for more information.
Use the Call command to dial any number stored in your Contacts list by saying the
name of the contact (Name Dialing). You can also use Call to dial any telephone
number, even numbers not stored in your contact list, by speaking the individual
digits in the number (Digit Dialing).
Call Functions
24
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1.
In standby mode, press and hold the
key or the
key.
“Say a Command” appears in the display and is pronounced through the
earpiece.
2.
Say, “Call”.
You are prompted to “Say the name or number”.
3.
Speak clearly and say the name of a person in your Contacts list, first
name followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the
number.
If Voice Dial is not sure which name you said, it displays a choice list of up
to three names and prompts you with “Did you say?” followed by the first
name on the list.
4.
Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See “Choice Lists” on
page 91, for more information.)
• Press the Repeat (right) soft key (
or
) to say the name again.
• Press the Settings (left) soft key (
or
), then press the Exit right soft
key (
or
) to exit VoiceSignal without dialing.
If the recognized name has multiple numbers stored for it (that is, Mobile,
Work, Home, and so on), Voice Dial displays the possible choices and
prompts you with “Which number?”
5.
Say one of the following number types:
• “Home”
• “Work”
• “Mobile 1”
• “Mobile 2”
Voice Dial dials the specified number.
25
Answering a Call
Dialing a Number
To dial a number using Voice Dial, do the following:
1.
In standby mode, press and hold the
key or the
key.
“Say a Command” appears in the display and is pronounced through the
speaker.
2.
Say “Call”.
VoiceSignal prompts you to “Say the name or number.”
3.
Speak clearly and say the telephone number of the person you want to
call.
For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats it and dials the number. If
Voice Dial is not sure it has recognized the number, it displays a choice list
of up to three numbers and prompts you with “Did you say?” followed by
the first number on the list.
4.
Say “Yes” to confirm the number or “No” to hear the next one, or use the
keypad to select the correct number from the list. (See See “Choice Lists”
on page 91, for more information.)
• Press the Repeat (right) soft key (
or
) to say the name again.
• Press the Settings (left) soft key (
or
), then press the Exit right soft
key (
or
) to exit VoiceSignal without dialing.
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains 2-Sec Pause(s) simply wait for the pauses
to pass and the dialing to complete.
• If you voice dial a contact that contains Wait(s), wait for the appropriate prompt(s)
from the number you are calling (credit card number, bank account number, and
so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
• If the caller can be identified, the caller’s number (or name if it’s in your Contacts)
appears in the display.
• If the caller cannot be identified, Call from unavailable #, Call from restricted #,
or no number appears in the display.
Call Functions
26
Tip: Assign pictures to Contacts entries. The entry’s assigned picture appears in the display when you
receive a call from that entry. See “Assigning a Picture to a Contacts Entry” on page 56.
The phone continues to notify you of the call until one of the following events occur:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium, Medium,
Medium/High, High, or Vibrate/High.
• Different ring types or melodies to distinguish callers.
• Name display with caller ID. (If the caller’s name is programmed into your
Contacts).
• Information about the last 90 each of incoming, missed, and outgoing calls are
automatically stored to a call log.
Set Call Ringer Volume
1.
In standby mode, press the Volume key on the right side of the phone.
2.
Press the Volume key up or down to set the call ringer volume as desired.
Adjust the Ringer
1.
In standby mode, press the Volume key (
up or down. Options are:
•
•
•
•
2.
Ringer Off
Vibrate
Low
Low/Medium
•
•
•
•
) on the right side of the phone
Medium
Medium/High
High
Vibrate/High
Press OK once you’re satisfied with the setting. The phone returns to
standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the MENU (left) soft key (
),
then pressing the
,
,
, and
keys. Use the Volume key on the right side
of your phone to adjust the ringer volume setting.
Note: The Vibrate icon (
) appears in the display when the call ringer is set to Vibrate. The Vibrate/Ring
icon (
) appears in the display when the call ringer is set to Vibrate/High.
27
Answering a Call
Call Answer
Select from two methods for answering calls. This option can be changed in the
Settings menu.
1.
In standby mode, press the MENU (left) soft key (
(for Settings),
(for Call Settings), and
), then press
for Call Answer.
Tip: You can also carry out this procedure using the QWERTY keypad.
The following options appear in the display:
• Any Key — Pressing any key except
or
answers a call.
• Send Key — Only pressing
answers a call.
2. Use the Up/Down navigation keys to highlight the Call Answer option of
your choice.
3.
Press
OK
to activate the method for answering calls.
Call Waiting
If you’re on a call, your phone beeps when another call is incoming. Contact your
Wireless Carrier for availability.
1.
Press
2.
Press
and the second caller is placed on hold and you’re returned to
the original caller.
to connect and ask the calling party to remain on the line.
3.
Press
to alternate between calls.
Caller ID
Caller ID lets you identify who is calling you by displaying a caller’s number. If the
caller’s name and number are stored in Contacts, the caller’s name also appears. If
you’ve assigned a picture to the entry, it appears in the display as well.
Call Block
You can prevent your number from displaying on another phone’s caller ID screen by
enabling Call Block.
1.
In standby mode, enter
2.
Enter the number you wish to call, then press
,
,
.
.
Silence an Incoming Ring
During an incoming call, any of the following keys can be pressed to silence the
ringer:
• The up or down volume key ( ) on the right side of the phone.
Call Functions
28
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voicemail.
䊳
During an incoming call, press the Ignore (right) soft key (
incoming call is forwarded to Voicemail.
). The
In-Use Menu
You can access a number of menus and features even while in a call.
1.
While in a call, press the Mute/Unmute (left) soft key (
enable the microphone.
) to disable/
While in a call, press the Options (right) soft key (
). The following
options appear in the display:
• Message — Display the Messages menu.
• Contacts — Display the Contacts menu.
• Recent Calls — View your recent calls log.
• Send DTMF — Send your phone number as DTMF tones to the other person
on the call.
• Voice Privacy — When set to Enhanced, the phone sounds an audible beep
when you loose privacy (encryption) on a CDMA connection. For this option to
work correctly, you must have the Enhanced privacy option enabled in the
Security settings. (This option is enabled by default.)
• Location — Turn your GPS location on or set GPS location for emergency calls
only.
• Voice Memo — Record this call. Recorded calls are saved to the My Sounds
gallery. (For more information, refer to “Using My Sounds Gallery” on page
104.)
3. Within the above menu list, do one of the following:
• Use the navigation key to highlight a menu or feature. Press the OK key to open
the highlighted menu or to activate the highlighted feature.
• Press the Cancel (right) soft key (
) to exit the menu.
2.
Calls
Your phone has Call Logs that retain information about Outgoing, Incoming, and
Missed Calls. The Calls menu lets you access this information for future reference,
to return calls, and to add new Contacts. You can also view times for your last call
and the total of all calls.
Tip: To quickly view a list of your most recent calls (outgoing, incoming, and missed), briefly press the
key in standby mode. The All Calls screen listing to 270 of your most recent calls appears in the
display.
29
Calls
Outgoing Calls
The last 90 outgoing calls are stored in the Outgoing calls log. Review the Outgoing
calls log for the time and date of a call, as well as other information.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Calls) and
for Outgoing Calls. A list of your outgoing
calls appears in the display.
2.
Use the Up and Down navigation keys to highlight a call, then press
to view further information about the call.
OK
Press the Options (right) soft key (
). The following options appear in
the display:
• Save — Save the number to your Contacts.
• Details — Contacts calls only — Lets you view the Contacts entry for the
recipient of this call.
• Erase — Erase the selected call from your Outgoing call list.
• Lock/Unlock — Blocks/permits erasure of the selected call from your Outgoing
call list.
• Erase all — Erase all unlocked calls from your Outgoing call list.
• View Timers — Call Timer screen appears in the display listing the number
and types of calls and their total durations. (See “Call Timer” on page 33 for
more information.)
4. Use the Up and Down navigation keys to highlight an option.
3.
5.
Press
OK
to perform the highlighted option’s function.
Incoming Calls
The last 90 Incoming calls are stored in your phone’s Incoming call log. You can
review the Incoming call log for time and date of the call, as well as other
information.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Calls) and
for Incoming Calls. A list of your
Incoming calls appears in the display.
2.
Use the Up and Down navigation keys to highlight a call, then press
to view further information about the call.
3.
Press the Options (right) soft key (
) to display a pop-up menu
containing the following options:
• Save — Save the number to your Contacts.
• Details — Contacts calls only — Lets you view the Contacts entry for the
originator of this call.
Call Functions
30
OK
• Erase — Erase the selected call from your Incoming call list.
• Lock/Unlock — Blocks/permits erasure of the selected call from your Incoming
call list.
• Erase all — Erase all unlocked calls from your Incoming call list.
• View Timers — Call Timer screen appears in the display listing the number
and types of calls and their total durations. (See See “Call Timer” on page 33 for
more information.)
4. Use the Up and Down navigation keys to highlight an option.
5.
Press
OK
to perform the highlighted option’s function.
Missed Calls
The last 90 missed calls (calls not picked up) are stored in the Missed call log.
Review the Missed call log for the time and date of the call, as well as other
information.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Calls) and
for Missed Calls. A list of your missed calls
appears in the display.
2.
Use the Up and Down navigation keys to highlight a call, then press
view further information about the call.
OK
to
Press the Options (right) soft key (
) to display a pop-up menu that
contains the following options:
• Save — Save the number to your Contacts.
• Details — Contacts calls only — Lets you view the Contacts entry for the
originator of this call.
• Erase — Erase the selected call from your Missed call list.
• Lock/Unlock — Blocks/permits erasure of the selected call from your Missed
call list.
• Erase all — Erase all unlocked calls from your Missed call list.
• View Timers — Call Timer screen appears in the display listing the number
and types of calls and their total durations. (See See “Call Timer” on page 33 for
more information.)
4. Use the Up and Down navigation keys to highlight an option.
3.
5.
Press
OK
to perform the highlighted option’s function.
Erase Logs
You can erase Outgoing, Incoming, Missed, or All Calls.
Erase All Calls
1.
31
In standby mode, press the MENU (left) soft key (
), then press
Calls
(for Calls) and
for All Calls. The All Calls list appears in
the display with the first call in the list highlighted.
Press the Options (right) soft key (
) to display a pop-up menu that
contains the following options:
• Save — Save the number to your Contacts.
• Details — Contacts calls only — Lets you view the Contacts entry for the
originator of this call.
• Erase — Erase the selected call from your All Calls list.
• Lock/Unlock — Blocks/permits erasure of the selected call from your All Calls
list.
• Erase all — Erase all unlocked calls from your All Calls list.
• View Timers — Call Timer screen appears in the display listing the number
and types of calls and their total durations. (See See “Call Timer” on page 33 for
more information.)
3. Use the Up and Down navigation keys to highlight Erase all, then press the
OK key.
2.
4.
Erase all entries?” appears in the display as well as the options Yes and
No.
5.
To Erase all calls, press the Yes (left) soft key (
).
To keep the calls, press the No (right) soft key (
).
Data Call
The last 90 data calls are stored in the Data call log. Review the Data call log for the
time and date of the data call, as well as other information.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Calls) and
for Data Call. The Data list appears in the display
with the first call in the list highlighted.
2.
Press the Options (right) soft key (
) to display a pop-up menu that
contains the following options:
• Save — Save the number to your Contacts.
• Erase — Erase the selected data call from your Data list.
• Lock/Unlock — Blocks/permits erasure of the selected data call from your
Data list.
• Erase all — Erase all unlocked data calls from your Data list.
• Data Counter — Data Counter screen appears in the display listing the amount
of data Transmitted, Received, and the Total data transmitted and received since
you last reset the Data Counter. Also listed is the Lifetime Data Counter that
Call Functions
32
shows the total amount of data transmitted and received since your phone was
activated. (See “Call Timer” on page 33 for more information.)
3. Use the Up and Down navigation keys to highlight an option.
4.
Press
OK
to perform the highlighted option’s function.
Call Timer
View the duration of your last call, total calls, and calls made during the life of your
phone using the Call timer feature. Call timer is not for billing purposes.
In standby mode, press the MENU (left) soft key (
), then press
(for Calls) and
for Call Timer. The following options appear in the
display:
• Last Call — Shows the duration of your last call.
• All Calls — Shows the number and total duration of all calls originated by and
made to your phone since the last erasure.
• Received Calls — Shows the number and total duration of all calls made to
your phone since the last reset.
• Outgoing Calls — Shows the number and total duration of all calls originated
by your phone since the last reset.
• Roaming Calls — Shows the number and total duration of all calls originated
by and made to your phone while roaming and since the last reset.
• Lifetime Calls — Shows the duration of all calls on your phone since activation
(Lifetime timers cannot be reset).
2. Use the Up and Down navigation keys to highlight a particular timer.
1.
3.
Press the Reset (left) soft key (
) to reset the highlighted timer.
Press the Reset All (right) soft key (
Lifetime Calls.
4.
Press
OK
) to reset all of the timers except
to exit the Call Timer screen.
Note: Although Total call timers can be erased, LifeTime call timers can never be erased.
Data Counter
Use Data Counter to view the amount of data that has been sent or received (or a
total of both) using the data services that your phone supports. The Data Counter can
be a helpful tool for monitoring data usage, especially if your service agreement has
specified limits.
33
Calls
In standby mode, press the MENU (left) soft key (
), then press
(for Calls) and
for Data Counter. The following options
appear in the display:
• Transmit KB — Shows the amount of data (in kilobytes) that your phone has
transmitted since last being reset.
• Received KB — Shows the amount of data (in kilobytes) that your phone has
received since last being reset.
• Total — Shows the amount of data (in kilobytes) that your phone has
transmitted and received since last being reset.
• Lifetime Data Counter — Shows the amount of data (in kilobytes) that your
phone has transmitted and received since being activated.
2. To reset a timer other than Lifetime Data Counter, use the Up/Down
navigation keys to highlight the timer you want to reset and press the
Reset (left) soft key (
).
1.
3.
To reset all timers except Lifetime Data Counter, press the Reset All (right)
soft key (
).
4.
Press
OK
to exit the Data Counter screen.
Note: Although other data counters can be reset, only the Lifetime Data Counter can never be reset.
Store Numbers from Call Logs
Store numbers from your Outgoing, Incoming, Missed, and All calls logs to
Contacts.
Tip: In standby mode, briefly press
list to save to Contacts.
1.
to display the Recent Calls list. You can then select any call in the
In standby mode, press the MENU (left) soft key (
for Calls.
), then press
Press the corresponding number on the keypad to view call logs for the
following call types.
•
for Outgoing Calls
•
for Incoming Calls
•
for Missed Calls
•
for All Calls
3. Use the Up and Down navigation keys to highlight the number you wish to
store in Contacts and press OK .
2.
Call Functions
34
35
4.
Press the Options (right) soft key (
navigation keys to highlight Save.
), then use the Up and Down
5.
Select Create New to add the number as a Contacts entry, or select
Update Existing to find a Contact with which to associate the new
number.
6.
Follow the prompts to store the number to Contacts.
Menu Navigation
Section 4: Menu Navigation
Topics Covered
• Menu Navigation
• Menu Shortcuts
• Navigation Key Shortcuts
• Navigate Using a Shortcut
• Menu Outline
This section explains the menu navigation for your phone. It also includes an
outline of all the available menus associated with your phone.
Note: Although all procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
Menu Navigation
Access the menus and sub-menus in your phone using the navigation key
( OK ) and soft keys (
or
), or use a shortcut.
1.
In standby mode press the MENU (left) soft key (
menus appear in the display.
). The first of several
Note: More than one menu may appear in your display. This setting can be modified in the Display / Menu
Style menu. (See “Settings” on page 122 for more information.)
2.
Use the navigation key to browse through the menus.
3.
Press
4.
Press the Back (right) soft key (
the previous menu.
OK
to enter the menu or sub-menu that appears in the display.
) or the CLR key (
) to return to
Return to the Previous Menu
• Press the Back (right) soft key (
) to return to a previous menu.
• When Back does not appear in the display, press
to return to the previous
menu.
Menu Navigation
36
Menu Shortcuts
Use shortcuts to quickly access menus and sub-menus. Press the MENU (left) soft
key (
), then press the number to the left of the menu to jump to the desired
menu, sub-menu, or feature. For example, to jump to the Outbox sub-menu, press
the MENU (left) soft key (
), then press
(for Messages) and
for
Outbox.
Navigation Key Shortcuts
QWERTY Keypad Closed
In standby mode and with the QWERTY keypad closed, press a navigation key to
launch the key’s corresponding application in the pattern shown here.
Contacts
Metro Web
OK
@Metro
Messages
QWERTY Keypad Open
In standby mode and with the QWERTY keypad open, the navigation key application
pattern rotates 90° as shown here.
Metro Web
OK
Contacts
Messages
37
@Metro
Navigate Using a Shortcut
QWERTY Keypad Shortcuts
In standby mode and with the QWERTY keypad open, you have the option of using
the arrow keys on the keypad itself to launch applications, as shown here.
Contacts
@Metro
Metro Web
Messages
Navigate Using a Shortcut
You can also access menus and sub-menus using menu numbers. Enter the menu
number after pressing the MENU (left) soft key (
) to go directly to the menu or
sub-menu of your choice. Before you can navigate using a shortcut, you’ll need the
menu or sub-menu number that you wish to access.
1.
In standby mode, press the MENU (left) soft key (
2.
Press the number of the menu, sub-menu, and so on for the feature that
you wish to access.
Example: Press the MENU (left) soft key (
), then press
Tools (MENU 8), and then to the Calendar (sub-menu 2).
,
).
. This takes you to the
Menu Outline
1
Contacts
1.1
1.2
1.3
1.4
Find
Add New Entry
Speed Dial
Group
1.4.1
1.4.2
1.4.3
1.4.4
1.4.5
1.5
No Group
Business
Colleague
Family
Friends
Memory Info
Menu Navigation
38
2
Calls
2.1
2.2
2.3
2.4
2.5
2.6
2.7
3
Outgoing Calls
Incoming Calls
Missed Calls
All Calls
Data Call
Call Timer
Data Counter
Messages
3.1
Send Message
3.1.1
3.1.2
3.2
3.3
3.4
3.5
3.6
Inbox
Outbox
Drafts
Voicemail
Erase Messages
3.6.1
3.6.2
3.6.3
3.6.4
3.7
Text Message
Picture Message
Inbox
Outbox
Drafts
All Messages
Msg Settings
3.7.1
General
3.7.1.1
3.7.1.2
3.7.1.3
3.7.1.4
3.7.1.5
3.7.1.6
3.7.1.7
3.7.1.8
3.7.2
Text Message
3.7.2.1
3.7.2.2
39
Auto Save
Auto Erase
Quick Text
Voicemail #
Entry Mode
Callback #
Signature
Reminder
Auto View
Signature
Menu Outline
3.7.2.3
3.7.3
Picture Message
3.7.3.1
3.7.3.2
4
@metro
MetroWEB
5.1
6
Auto Receive
Signature
@metro
4.1
5
Auto Scroll
Get In Web
Voice SVC
6.1
6.2
Voice Commands
Voice Settings
6.2.1
6.2.2
6.2.3
Choice Lists
Sensitivity
Digit Dialing
6.2.3.1
6.2.3.2
6.2.4
Adapt Digits
Reset Digits
Sound
6.2.4.1
6.2.4.2
6.2.4.3
6.2.4.4
Prompts
Digits
Names
Name Settings
6.2.4.4.1
6.2.4.4.2
6.2.5
6.2.6
7
Speed
Volume
Voice Launch
About
Multimedia
7.1
7.2
7.3
7.4
Camera
My Images
My Ringtones
My Sounds
7.4.1
Record New
Menu Navigation
40
8
Tools
8.1
Bluetooth
8.1.1
8.1.2
8.1.3
Add New Device
Registered List
Bluetooth Settings
8.1.3.1
8.1.3.2
8.1.3.3
8.1.3.4
8.2
8.3
8.4
Calendar
Memo Pad
Alarm Clock
8.4.1
8.4.2
8.4.3
8.5
8.6
8.7
8.8
9
Alarm 1
Alarm 2
Alarm 3
World Time
Calculator
Stop Watch
Converter
8.8.1
8.8.2
8.8.3
8.8.4
8.8.5
8.8.6
8.9
Currency
Length
Weight
Volume
Area
Temperature
Tip Calculator
Settings
9.1
9.2
Location
Display Settings
9.2.1
Wallpapers
9.2.1.1
9.2.1.2
9.2.2
9.2.3
41
Enable/Disable
Discovery Mode
Device Name
Device Info
My Images
Preset Images
Clock Format
Theme
Menu Outline
9.2.4
Dialing Font
9.2.4.1
9.2.4.2
9.2.5
Banner
9.2.5.1
9.2.5.2
9.2.6
Personal
ERI Banner
Backlight
9.2.6.1
9.2.6.2
9.2.6.3
9.3
Style
Size
Main Display
Keypad
Brightness
Sound Settings
9.3.1
Volume
9.3.1.1
9.3.1.2
9.3.1.3
9.3.1.4
9.3.2
Voice Calls
Messages
Alarms
Key Tone
Ringer Type
9.3.2.1
Voice Calls
9.3.2.1.1
9.3.2.1.2
9.3.2.2
Messages
9.3.2.2.1
9.3.2.2.2
9.3.2.2.3
9.3.2.3
My Ringtones
My Sounds
Alerts
9.3.3.1
9.3.3.2
9.3.3.3
9.3.3.4
9.4
Text Message
Picture Message
Voicemail
Roam Ringer
9.3.2.3.1
9.3.2.3.2
9.3.3
My Ringtones
My Sounds
Minute Beep
Roaming
Call Connect
Power On/Off
Call Settings
9.4.1
9.4.2
9.4.3
9.4.4
9.4.5
Call Answer
Auto Answer
Auto Retry
TTY Mode
Voice Privacy
Menu Navigation
42
9.4.6
9.4.7
9.5
Data Settings
DTMF Tones
Phone Settings
9.5.1
9.5.2
9.5.3
Airplane Mode
Language
Secruity
9.5.3.1
9.5.3.2
9.5.3.3
Lock Phone
Change Lock
Emergency #
9.5.3.3.1
9.5.3.3.2
9.5.3.3.3
9.5.3.4
9.5.3.5
9.5.3.6
Reset Phone
Erase All Entry
Restriction
9.5.3.6.1
9.5.3.6.2
9.5.4
9.5.5
9.5.6
NAM Selection
System Select
Clock Set
9.5.6.1
9.5.6.2
9.5.7
9.5.8
9.6
9.7
Quick Search
Auto Key Lock
Memory Usage
My Images
My Ringtones
My Sounds
Phone Info
9.7.1
9.7.2
9.7.3
43
Set Time
Set Date
Memory Info
9.6.1
9.6.2
9.6.3
9.6.4
911
Empty
Empty
Phone Number
Icon Glossary
Version
Outgoing
Incoming
Section 5: Entering Text
Topics Covered
• Built-in QWERTY Keypad
• Changing the Text Entry Mode
• Using T9® Mode (Phone Keypad Only)
• Using Abc Mode
• Entering Numbers
• Entering Symbols
This section outlines how to select the desired text entry mode when entering
characters using the phone keypad or the nested, QWERTY keyboard-style keypad.
This section also describes how to use the T9 predictive text entry system to
reduce the number of key strokes needed to enter text.
Entering Text
44
Built-in QWERTY Keypad
Display
CLR Key
Fn (Input Mode) Key
Right Soft Key
Left Soft Key
Navigation Keys
Your r410 has a built-in, keyboard-style keypad, commonly called QWERTY, that you
can access by sliding it open from beneath the top section of the phone. This also
automatically rotates the image in the display to show information in a wider,
landscape format. Using the QWERTY keypad, you can type letters, numbers,
punctuation, and other special characters into text entry fields or other applications
simpler and faster than using the telephone keypad.
Note: Two of your phone’s functions (@metro and MetroWEB) call for you to use the QWERTY keypad. Other
functions requiring text entry (such as, Messaging and Memo Pad) accept text entry from whichever
keypad you prefer.
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters, numbers, and symbols.
You can use the following text entry modes to simplify text entry:
• T9 Word — Press each phone key only once to enter the letter of the word that
you’re spelling. T9 WORD mode letter options are:
– T9 Word — Enter initial capital letters
– T9 WORD — Enter all upper case letters
– T9 word — Enter all lower case letters
Note: T9 Word does not support the QWERTY keypad, which does not need this function.
45
Using T9® Mode (Phone Keypad Only)
• Abc — Enter letters, numbers, and symbols by using the QWERTY keypad or by
repeatedly pressing each phone key until the desired character (as shown on the
key) appears in the display. ABC mode letter options are:
– Abc — Enter initial capital letters
– ABC — Enter all upper case letters
– abc — Enter all lower case letters
• 123 — Enter numbers by pressing the corresponding keys on the phone keypad or
the QWERTY keypad.
Tip: Using the QWERTY keypad, also use 123 mode to enter symbols into your message simply by pressing
the keys labeled with the symbols you want.
• Symbols — Using the phone keypad, enter a symbol into your message by
pressing the number above the symbol in the Symbols pop-up window.
The current text entry mode (T9 Word, Abc, ABC, 123, or Symbols) is indicated in
the lower part of a text entry screen. To change the text entry mode, do the
following:
While composing a text message, press the Left soft key (
or
).
The following options appear in the display:
• T9Word
• Abc
• ABC
• 123
• Symbols
2. Use the Up and Down navigation keys to highlight the desired text entry
mode, then press OK or
.
1.
Using T9® Mode (Phone Keypad Only)
T9 Word recognizes commonly used words for the numeric sequence of key presses
and inserts the word into your message. T9 Word is much faster than the traditional
method of text entry (Abc) and requires only one key press per letter of the word that
you’re spelling.
1.
While composing a text message, press the Left soft key (
). Use the
Up and Down navigation keys to highlight T9Word, then press OK or
.
Entering Text
46
• For practice, enter the word “Samsung” by pressing each of the following keys
only once:
S
A
M
S
U
N
G
T9 Word recognizes that the most commonly used word for the numeric
sequence you just entered is “Samsung.” If more than one word shares the
same numeric sequence, T9 Word provides the most commonly used word.
Press
to display other words, if available.
Note: To enter a space, press the
key. To enter a period, press the
key. These key
functions apply to both T9 Word and Abc modes. For other symbols, see "Entering Symbols" on
page 48.
Using Abc Mode
1.
While composing a text message, press the Left soft key (
or
).
Use the Up/Down navigation keys to highlight Abc, then press OK or
.
2.
Enter characters while in Abc mode by using one of following keypads:
• Using the QWERTY keypad, press the key labeled with the desired character
(such as, press
for “G” and
for “H”).
• Using the phone keypad:
– Press the key repeatedly until the desired character appears in the display (such
as, press
once for “G” and twice for “H”).
– Pause briefly and the displayed character is accepted and inserted into your
message.
– Press
to enter a space and press
to enter a period.
Entering Numbers
Enter numbers into a text message while in 123 mode.
47
1.
While composing a text message, press the Left soft key (
or
).
Use the Up/Down navigation keys to highlight 123, then press OK or
.
2.
Enter numbers while in 123 mode by using one of following keypads:
• Using the QWERTY keypad, press the key labeled with the corresponding
number that you wish to insert into your message.
Entering Symbols
• Using the phone keypad, press the key labeled with the corresponding number
that you wish to insert into your message.
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
䊳
While composing a text message, enter symbols by using one of following
keypads:
• Using the QWERTY keypad:
– Press the Left soft key, use the Navigation key to highlight 123 (not Symbol),
then press
.
– Press the key(s) labeled with the corresponding symbol(s) that you wish to insert
into your message.
– To return to Abc mode, press the Left soft key, use the Navigation key to
highlight Abc, then press
.
• Using the phone keypad:
– Press the Left soft key (
), use the Navigation key to highlight Symbol, then
press OK . The first of three symbol screens appear in the display.
– Use the Left and Right soft keys to page through the other symbols, if desired.
– Press the key that corresponds with the symbol that you wish to enter. For
example, press
for an exclamation point (!).
– Repeat these steps to insert additional symbols into your message.
Entering Text
48
Section 6: Understanding Your Contacts
Topics Covered
• Contacts
• Finding a Contacts Entry
• Adding a New Contacts Entry
• Editing a Contacts Entry
• Saving a Number After a Call
• Speed Dial
• Contacts Groups
• Deleting a Contacts Entry
• Memory Info
This section details how you can manage your daily contacts by storing their
names and numbers in your Contacts list. You can have your Contacts entries
sorted by name.
Note: Although the procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
Contacts
Up to 500 entries can be stored in Contacts. Each entry can have up to five
associated phone numbers and one e-mail address. Each phone number can be up
to 32 digits in length, including 2-Sec or Wait pauses (see “Manual Pause Calling”
on page 23 for more information), and associated names can be up to 32 characters
in length. You can assign the Speed Dial numbers of your choice for each entry. You
can also mark your Contacts list as Restricted to prevent unauthorized viewing. (See
“Restriction” on page 135 for more information).
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch Dialing allow you to call
numbers stored in Contacts faster.
49
Finding a Contacts Entry
Open Contacts
1.
In standby mode, press the MENU (left) soft key (
), then press
for Contacts. The following options appear in the display:
• Find — Find a phone number By Name.
Tip: You can also access the Find option from standby mode, by pressing the Contacts shortcut (Up
Navigation) key.
• Add New Entry — Add a number or e-mail address to your Contacts.
• Speed Dial — Assign a Contacts entry to a Speed Dial number. (See “Speed
Dial” on page 59 for more information.)
• Group — Review, send messages to, add Contacts to, or rename four out of
your five groups. (See “Contacts Groups” on page 61 for more information.)
• Memory Info — Display used and available memory for Contacts entries.
Tip: To launch the Contacts menu using a voice command — In standby mode, press and hold
until the phone prompts, “Say a command.” Say “Go to Contacts” into the microphone.
2.
Use the Up/Down navigation keys to highlight the option of your choice,
and press the OK key.
Tip: You can also press the keypad number key that corresponds to the menu option number.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Lookup command to view contact information for any named
contact stored in your Contacts list by saying the name.
Note: The Lookup command shows the requested contact information in the display but does not dial any
phone numbers for the contact.
To look up information for a specific contact:
1.
In standby mode, press and hold the
key to launch VoiceSignal.
“Say a Command” appears in the display and is pronounced through the
speaker.
2.
Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3.
Speak clearly and say the full name of the person you want to call, exactly
as it is entered in your Contacts list.
Understanding Your Contacts
50
• If VoiceSignal recognizes the name you said, the contact information for that
name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of up to three
names appears in the display, and VoiceSignal prompts you with “Did you
say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See See “Choice Lists” on
page 91, for more information.)
• To say the name again, press the Repeat (right) soft (
) key.
• To exit VoiceSignal without dialing, press the Settings (left) soft (
) key and
press the Exit (right) soft (
).
5. The contact information for the name you selected appears in the display.
• Press
to dial the number associated with the name.
• Press the Erase (left) soft key (
) to erase this entry from your Contacts list.
• Press the EDIT key ( OK ) to add or change information for this entry.
• Press the Options (right) soft key (
) and the following options popup in the
display:
– New Contact
– Erase
– Send Txt Msg
– Send Pic Msg
– Call
– Send Name Card With Bluetooth
Shortcut Key Method
If you’ve stored a name entry in Contacts, Find allows you to find it quickly.
1.
In standby mode, press the Contacts shortcut (Up Navigation) key.
The Find screen appears in the display with the Go To field highlighted,
followed by the first few names in your Contacts list.
Tip: You can also access the Find screen from standby mode by pressing the MENU (left) soft key (
then pressing
(for Contacts) and
for Find.
2.
),
Enter a name as entered in Contacts. For example, if you saved the name
as “Amy Smith”, begin the search by pressing
(for “A”).
As you enter letters, the names of the closest matches appear in the
display.
3.
51
When the desired entry is listed in the display, use the Up/Down navigation
keys to highlight the entry.
Adding a New Contacts Entry
•
•
•
•
Press
to dial the number associated with the name.
Press the Edit (left) soft key (
) to add or change information for this entry.
Press the VIEW key ( OK ) to show information about the entry.
Press the Options (right) soft key (
). The following options appear in the
display:
– New Contact — Add a new entry to Contacts.
– Erase — Erase the name and associated information.
– Send Txt Msg — Create and send a text message to the selected Contact.
– Send Pic Msg — Create and send a picture message to the selected Contact.
– Call — Dial the number associated with the name.
– Send Name Card With Bluetooth — Send a copy of a Contacts entry to
another Bluetooth device.
Use the Up/Down navigation keys to highlight an option, then press the OK
key. The highlighted option’s sub-menu appears in the display.
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to Contacts.
Dial Method
1.
Using the keypad, enter the number you wish to add to your Contacts.
Press the Save (left) soft key (
). The following options appear in the
display:
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an existing
Contacts entry.
3. Use the Up/Down navigation keys to select Create New and press the
OK key. The Select Type screen appears in the display showing the
following icons:
2.
Mobile 1
Mobile 2
Home
Work
Fax
Understanding Your Contacts
52
4.
Use the Up/Down navigation keys to highlight the type that matches your
new entry, then press the OK key.
5.
Use the keypad to enter a name to associate with the Contacts entry.
6.
Press the
OK
key to save the entry.
Menu Method
1.
In standby mode, press the MENU (left) soft key (
(for Contacts) and
for Add New Entry.
), then press
The Add New Entry screen appears in the display with the Name field
highlighted.
2.
Enter the name of the new entry using the keypad. (See “Entering Text” on
page 44 for more information.)
Use the Up and Down navigation keys to highlight one of the following
fields:
• Mobile 1
• Home
• Work
• E-Mail 1
• Group
• Ringtone
• Mobile 2
• Fax
• E-Mail 2
4. Enter a phone number in the highlighted field.
3.
5.
Repeat steps 3 and 4 as needed.
6.
Press the
OK
key to save the new entry.
Editing a Contacts Entry
Editing Contacts Name and Numbers
53
1.
Find the Contacts entry you wish to change. See “Finding a Contacts
Entry” on page 50 for more information.
2.
Use the Up/Down navigation keys to highlight the entry and press the
OK key. The View Contact screen appears in the display showing the
highlighted entry’s information.
3.
Use the Up/Down navigation keys to review the information for the entry
that you wish to change, then press the EDIT key ( OK ). The Edit
Contact screen appears in the display.
Editing a Contacts Entry
4.
Use the Up/Down navigation keys to highlight the particular information
you want to add or change.
• Press
to backspace and delete numbers or letters.
• Press and hold
to clear all numbers or letters in the highlighted field.
• Press the Options (right) soft key (
). The following options popup in the
display:
– Set Speed Dial / Remove speed dial — Assign/remove a speed dial number
(see "Speed Dial" on page 59. for more information).
– Set as default — Set the number the phone will dial when Contacts dialing,
speed dialing, or voice dialing.
– 2-Sec Pause — A 2-second pause after which dialing resumes (see "Add
Pauses to Contacts Numbers" on page 54. for more information).
– Wait — A hard pause (waits for input from you).
Use the Up/Down navigation keys to highlight the desired option, then press the
OK key.
5.
When you’re finished changing the contents of a field, press the OK key.
Your changes are saved and a confirmation message appears in the
display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often require a password or
account number. Instead of manually entering these numbers, you can store them in
a Contacts entry with the phone number and with special characters called pauses,
up to a maximum of 32 digits.
• Wait — Stops the calling sequence until the phone receives further input.
• 2-Sec Pause — Stops the calling sequence for two seconds, then sends the
remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For example, two consecutive Waits
cause a total pause time of four seconds. Keep in mind that pauses count as digits towards the 32digit maximum.
Understanding Your Contacts
54
To add pauses to a Contacts entry number, do the following:
1.
Find the Contacts entry associated with the number you want to include
one or more pauses. See “Finding a Contacts Entry” on page 50 for more
information.
2.
Select and edit the desired number. See “Editing a Contacts Entry” on
page 53 for more information.
Press the Options (right) soft key (
). The following pause options
appear in the display:
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
4. Use the Up/Down navigation keys to highlight the pause option of your
choice.
3.
5.
Press the
sequence.
6.
When you’re finished entering information, press the
the number to Contacts.
OK
key to enter the highlighted pause into the number
OK
key to store
Pause Dial from Contacts
1.
If you stored the number using 2-second pause(s), simply recall the
number from Contacts.
2.
If you stored the number using Wait(s), recall the number from Contacts
and wait for the appropriate prompt from the dialed number.
3.
Press
to dial the number.
Edit an Existing E-mail Address
1.
Find the Contacts entry you want to edit. See “Finding a Contacts Entry” on
page 50 for more information.
2.
Use the Up/Down navigation keys to highlight the desired Contacts entry,
then press the Edit (left) soft key (
).
The Edit Contact screen appears in the display.
55
3.
Use the Up/Down navigation keys to highlight the E-Mail field.
4.
Use the keypad to edit the e-mail address. (See “Entering Text” on page 44
for more information.)
5.
Press the
OK
key to save your changes.
Editing a Contacts Entry
Assigning a Picture to a Contacts Entry
When you assign a picture to a Contacts entry, the picture that you assigned to the
entry appears in the display when you receive a call from that Contact.
1.
Find the Contacts entry you want to edit. See “Finding a Contacts Entry” on
page 50 for more information.
2.
Use the Up/Down navigation keys to highlight the desired Contact, then
press the Edit (left) soft key (
).
3.
Use the Up/Down navigation keys to highlight the Picture ID field (at the
top of the Edit Contact screen), then press the Set (left) soft key (
).
The Edit Contact screen appears in the display.
A photo gallery screen appears in the display, showing a series of
thumbnail photos. (See “Using My Images Gallery” on page 103 for more
information.)
4.
Use the Up/Down navigation keys to highlight the picture that you wish to
assign to the Contacts entry.
If there are no pictures, press the Camera (left) soft key (
). If you
cannot find an appropriate picture, press the Camera (right) soft key
(
).
The camera viewfinder screen appears in the display.
5.
Press the TAKE key (
display.
6.
Press the Save (left) soft key (
viewfinder screen.
7.
Press the My Images (left) soft key (
gallery screen.
8.
Use the Up/Down navigation keys to highlight the picture that you wish to
assign to the Contacts entry, the press the OK key. The Contacts entry
screen appears in the display with a thumbnail view of the selected image
in the Picture ID field.
9.
Press the OK key to save the picture assignment to the selected
Contacts entry.
OK
). The picture you have taken appears in the
). You are returned to the camera
). You are returned to the photo
Understanding Your Contacts
56
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays the ringtone that
you assigned to the entry when you receive a call from that Contact instead of the
ringtone currently assigned to Voice Calls.
1.
Find the Contacts entry you want to edit. See “Finding a Contacts Entry” on
page 50 for more information.
2.
Use the Up/Down navigation keys to highlight the desired Contact, then
press the Edit (left) soft key (
). The Edit Contact screen appears in
the display.
Use the Up/Down navigation keys to highlight the Ringtone field, then
press the Set (left) soft key (
). The Contact Tone menu showing the
following options appears in the display:
• My Ringtones
• My Sounds
4. Use the Up and Down Up/Down navigation keys to highlight the desired
option, then press the OK key.
3.
The My Ringtones or the My Sounds file list appears in the display.
5.
Use the Up/Down navigation keys to highlight the ringtone or sound that
you wish to assign to the Contacts entry.
6.
Press the OK key. The Contacts entry screen appears in the display with
the name of the selected file in the Ringtone field.
7.
Press the
entry.
OK
key to save the ringer assignment to the selected Contacts
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your Contacts list.
Note: If the call was incoming and Caller ID information was unavailable, then the Save option is also
unavailable.
57
1.
Press
to end your call. The call time, length of call, phone number,
and name of the party (if available) appear in the display.
2.
Press the Save (right) soft key (
). The following options appear in the
display:
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an existing
Contacts entry.
Saving a Number After a Call
3.
Follow the instructions in the upcoming sections depending on whether the
number is a new entry or you wish to add it to an existing entry.
Create a New Entry
1.
Use the Up/Down navigation keys to highlight Create New and press the
OK key. The Create New screen appears in the display showing the
following number type options:
Mobile 1
Mobile 2
Home
Work
Fax
2.
Use the Up/Down Up/Down navigation keys to highlight the number type
that matches your new entry, then press the OK key.
3.
Enter a name for the new entry (see “Entering Text” on page 44 for more
information).
4.
Press the
OK
key. The new entry is saved to your Contacts list.
Add to an Existing Entry
1.
Use the Up/Down navigation keys to highlight Update Existing and press
the OK key. The Update Existing screen appears in the display showing
your Contacts list with the Go To field and the first Contacts entry
highlighted.
2.
Find the Contacts entry to which you want to add the new number. See
“Finding a Contacts Entry” on page 50 for more information.
3.
Press the
display:
OK
key. The following number type options appear in the
Mobile 1
Mobile 2
Understanding Your Contacts
58
Home
Work
Fax
Number types that are already assigned a number show the number
instead of the number type label.
4.
Use the Up/Down navigation keys to highlight the desired unassigned
number type, then press the OK key. The Contacts entry information
appears in the display with the new number posted in the appropriate
number type field.
5.
Press the
OK
key again to save your changes to the existing entry.
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number keys you press to
speed dial one of that entry’s numbers. For example:
• To speed dial the Contacts entry assigned to Location 5, press and hold the
key, (1-touch dialing).
• To speed dial the Contacts entry assigned to Location 35, press
then press
and hold the
key, (2-touch dialing).
• To speed dial the Contacts entry assigned to Location 235, press
, press
, then press and hold the
key (3-touch dialing).
You can assign one or more Speed Dial numbers to a Contacts entry during new
entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number, do the following:
59
1.
Follow either of the New Contacts entry procedures (see “Adding a New
Contacts Entry” on page 52) until you enter a name for the entry.
2.
After entering the Contacts entry name, do not press the OK key.
Instead, use the Up/Down Up/Down navigation keys to highlight the
number field.
3.
Press the Options (right) soft key (
). The following options appear in
the display:
• Set Speed Dial — Assign a speed dial number.
Speed Dial
• Set as default — Set the number the phone will dial when Contacts dialing,
speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes (see "Add
Pauses to Contacts Numbers" on page 54. for more information).
Use the Up/Down Up/Down navigation keys to highlight Set Speed Dial,
then press the OK key. The Speed Dial screen appears in the display.
4.
Use the Up/Down Up/Down navigation keys to highlight an Unassigned
Speed Dial number or enter an Unassigned Speed Dial number in the Go
To field using the keypad.
Important!: Do not enter Speed Call numbers 1 or 911. These numbers are already assigned to Voicemail
(001) and to emergency use (911).
5.
Press the SET key ( OK ). You are prompted to confirm your Speed Dial
number assignment.
6.
Press the Yes (left) soft key (
) to save your Speed Dial assignment and
return to the Add New Entry screen.
Note: Press the No (right) soft key (
7.
Press the
OK
) to discard the assignment and return to the Speed Dial screen.
key to save your changes.
Changing a Speed Dial Location
1.
Find the Contacts entry you want to edit. See “Finding a Contacts Entry” on
page 50 for more information.
2.
Use the Up and Down navigation keys to highlight the desired entry.
3.
Press the Edit (left) soft key (
4.
Use the Up and Down navigation keys to highlight the number field marked
by the Speed Dial icon (
).
5.
Press the Options (right) soft key (
). The following options appear in
the display:
• Remove speed dial — Unassign the current speed dial number.
• Set as default — Set the number the phone will dial when Contacts dialing,
speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes (see “Add
Pauses to Contacts Numbers” on page 54 for more information).
).
Understanding Your Contacts
60
Use the Up/Down navigation keys to highlight Remove speed dial, then
press the OK key. “Remove speed dial?” pops up in the display to
confirm your desire to remove the entry.
6.
Press the Yes (left) soft key (
) to remove the Speed Dial assignment.
“Speed Dial Removed” pops up in the display, and you are returned to the
Edit Contact screen.
7.
Do steps 4 through 7 of the “Assignment During Entry Creation” procedure
on page 59.
Contacts Groups
Contact Groups let you easily send messages to multiple, selected Contacts. You can
also use Groups to find Contact entries and to add/remove Contacts names in a
Group or to create or rename a Group.
Add Contacts Entry to a Group
Using Add New/Edit Contact Option
To add a Contact to a Group using either the Add New Contact option or the Edit
Contact option, do the following:
1.
Create a Contacts entry (see “Adding a New Contacts Entry” on page 52
for more information) or find a Contacts entry (see “Finding a Contacts
Entry” on page 50 for more information) that you want to add to a Group.
2.
Use the Up and Down navigation keys to highlight the Group field, the
press the Set (left) soft key (
).
The Select Group screen appears in the display showing Groups similar to
the following:
• No Group
• Business
• Colleague
• Family
• Friends
3. Use the Up and Down navigation keys to highlight the Group to which you
want to assign the selected Contact, then press the OK key.
You are returned to the Add New Entry/Edit Contact screen and the
selected Group name populates the Group field.
4.
61
Press the
OK
key to save your changes.
Contacts Groups
Using Group Add Option
The Add option lets you add one or more existing Contacts to a Group.
1.
In standby mode, press the MENU (left) soft key (
(for Contacts) and
for Group.
), then press
The Group List screen appears in the display showing Groups similar to
the following:
• No Group
• Business
• Colleague
• Family
• Friends
2. Use the Up and Down navigation keys to highlight a Group, then press the
Options (right) soft key (
). The following options popup in the display:
• Send Txt Msg
• Send Pic Msg
• Rename
• Erase
• Add
3. Use the Up and Down navigation keys to highlight Add, then press the
OK key.
The Add Contacts screen appears in the display showing a list of Contacts
entries.
4.
Do one of the following:
• Use the Up/Down navigation keys to highlight an entry you want to add to the
group, then press the MARK key ( OK ). A checkmark appears in the entry’s
checkbox.
Repeat as needed to check all the desired Contacts.
• Press the Mark All (right) soft key (
).
Note: To unmark a marked Contact, highlight the Contact and press the MARK key ( OK ) to clear the
checkmark.
5.
When you have marked the Contacts you want to add to the group, press
the Done (left) soft key (
). “Contact added to group” appears in the
display, followed by the selected Group list including the added Contacts.
Rename a Group
The Rename option lets you change the name any of the Groups, except No Group.
Understanding Your Contacts
62
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Contacts) and
for Group. The Group List screen appears in
the display.
Use the Up/Down navigation keys to highlight the Group name other than
No Group that you wish to change, then press the Options (right) soft key
(
). The following options popup in the display:
• Send Txt Msg
• Send Pic Msg
• Rename
• Erase
• Add
3. Use the Up and Down navigation keys to highlight Rename, then press the
OK key.
2.
The Rename Group screen appears in the display.
4.
Enter changes to the group name using the keypad. (See “Entering Text”
on page 44 for more information.)
5.
When you have completed your changes to the Group name, press the
SAVE key ( OK ).
“Group Renamed” appears in the display followed by the Group List
screen showing your renamed Group.
Add a New Group
The New option lets you add Groups.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Contacts) and
for Group. The Group List screen
appears in the display.
2.
Press the New (left) soft key (
display.
3.
Enter a new group name using the keypad. (See “Entering Text” on page
44 for more information.)
4.
When you have completed entering the new Group name, press the SAVE
key ( OK ). “Group Saved” appears in the display followed by the Group
List screen showing your new Group.
). The New Group screen appears in the
Erase a Group
The Erase option lets you delete a Group, thus freeing you to reassign the Contacts
formerly in the Group.
63
Deleting a Contacts Entry
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Contacts) and
for Group. The Group List screen
appears in the display.
2.
Use the Up and Down navigation keys to highlight the Group that you wish
to delete, then press the Options (right) soft key (
).
The following options popup in the display:
• Send Txt Msg
• Send Pic Msg
• Rename
• Erase
• Add
3. Use the Up and Down navigation keys to highlight Erase, then press the
OK key.
You are prompted to confirm the Group erasure.
4.
Press the Yes (left) soft key (
) to confirm erasure of the Group. Press
the No (right) soft key (
) to retain the Group.
Deleting a Contacts Entry
1.
Find the Contacts entry you want to delete. (See “Finding a Contacts Entry”
on page 50 for more information.)
2.
Use the Up/Down navigation keys to highlight the desired entry.
Press the Options (right) soft key (
). The following options appear in
the display:
• New Contact
• Erase
• Send Txt Msg
• Send Pic Msg
• Call
4. Use the Up/Down navigation keys to highlight Erase, then press the OK
key. The phone prompts you to confirm the erasure.
3.
5.
Press the Yes (left) soft key (
) to confirm erasure of the selected
Contact. Press the No (right) soft key (
) to retain the Contact.
Memory Info
The Memory Info menu option lets you view the amount of memory you have used
to store Contacts entries, as well as the memory remaining to store more Contacts
entries.
Understanding Your Contacts
64
䊳
In standby mode, press the MENU (left) soft key (
), then press
(for Contacts) and
for Memory Info.
The Memory Info Contacts screen appears in the display showing the
amount of memory Used and remaining (Free) for Contacts entries.
65
Accessing @metro (Mobile Shop)
Section 7: @metro
Topics Covered
• Accessing @metro (Mobile Shop)
With Mobile Shop, you can download full featured applications over the air
including games, personalized ring tones, pictures, and more. You can send and
receive instant messages and email, or browse the web to catch up on all the
latest news.
This section outlines how to obtain games and other applications for your phone.
For more information, contact your Wireless Carrier.
Accessing @metro (Mobile Shop)
1.
Open the QWERTY keypad.
Note: @metro is only accessible using the QWERTY keypad.
2.
In standby mode, do one of the
following to launch @metro:
• Press the Right navigation key.
• Press the MENU (left) soft key (
),
then press
(for @metro) and
for @metro.
The @metro menu appears in the
display as shown.
Applications Shopping and
Downloading
Download games, ring tones, e-mail, and more using the Mobile Shop. For
information on airtime charges, contact your Wireless Carrier.
1.
At the @metro menu, use the Left and Right navigation keys to highlight
the Mobile Shop icon (
), then press the OK key.
@metro
66
Note: The first time you access the Mobile Shop, “Browsing online and downloading apps may incur
network usage charges” appears in the display along with instructions on how to remove this
message.
Your phone takes a moment to connect, then the Mobile Shop Catalog
menu appears in the display.
2.
Follow the instructions in your phone’s display.
Note: Please check with your Wireless Carrier for availability of applications.
Changing Your @metro Settings
Use the Settings menu in Mobile Shop to manage, move, order applications, and
much more.
At the @metro menu, use the Left and Right navigation keys to highlight
the Settings icon ( ), then press the OK key. The following options
appear in the display:
• Order Apps — Download applications over the network.
• Move Apps — Move previously downloaded applications between available
folders.
• Manage Apps — View used and available memory.
• Main Menu View — Select whether you wish to view the main Mobile Shop
menu in a list or icon format.
• View Log — View the Mobile Shop log, which displays information about
recent activity using Mobile Shop.
2. Use the Up and Down navigation keys to highlight the desired option.
1.
3.
Press the
settings.
OK
key to enter the option’s sub-menu and view or change
Using On-line Help
The Help sub-menu within @metro is a short tutorial on several @metro-Mobile
Shop features. View information about charges, cancelling subscriptions, buying
apps, disabling apps, and more.
67
1.
At the @metro menu, use the Left and Right navigation keys to highlight
the Help ( ? ) icon.
2.
Press the OK key. The Help subjects described in the following
subsections appear in the display.
3.
Use the Up and Down navigation keys to highlight the desired Help subject.
4.
Press the
OK
key to view the selected Help information.
Accessing @metro (Mobile Shop)
Buying New Apps
To buy new and exciting apps, visit the MobileShop. It provides you with a variety of
apps you can choose from.
What do I pay?
When you buy an app, you will be charged for the purchase cost of the app.
Demo Apps
A Demo app is free and is designed to demonstrate the app’s main features. It
usually expires after a certain period of time or a number of uses and often has
limited functions. When you run a demo app, you will be presented with a purchase
option so you won’t have to look for the app in the MobileShop.
Removing Apps
You may remove apps that are no longer needed. When you remove an app, you
cannot use the application unless you purchase it again. To remove an app, choose
Settings > Manage Apps. Then, select the app you want to remove.
Disabled Apps
You can install new apps even if the memory of your phone is full by partially
removing (disabling) apps you haven’t used recently. When you need to use a
disabled app, you can restore it at no additional purchase cost.
Restoring Apps
Disabled apps can be quickly restored at no additional purchase cost. To restore an
app, run the application you want to restore from the Main Menu. You will be guided
through the restoration process.
Expired Apps
Apps that were purchased based on the number of uses or time expire. You can
purchase additional uses from the MobileShop.
@metro
68
Section 8: Messaging
Topics Covered
• Types of Messages
• Create and Send Text Messages
• Receive Text Messages
• Send Picture Messages in Camera Mode
• Send Picture Messages in Standby Mode
• Receive Picture Messages
• Message Boxes
• Erase Messages
• Message Settings
This section explains how to send or receive different types of messages. This
section also describes the features and functionality associated with messaging.
Note: Although the procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
69
Types of Messages
Types of Messages
Your phone is able to send and receive Text and Picture messages to compatible
phones and devices. Text messages can be up to 160 characters in length.
Note: Available memory is shared between all messages. You can store up to 100 messages. However, the
exact number is dependent upon message length.
Create and Send Text Messages
1.
In standby mode, press the Messages (Down navigation) key, then press
(for Send Message) and
for Text Message. The Create
Txt Msg screen appears in the display showing the To: list.
Tip: To launch the Create Txt Msg screen using a voice command — In standby mode, press and hold
until the phone prompts, “Say a command.” Say “Send Text” into the microphone. You are
then prompted to say a Contact name or a number for the first recipient of the message.
2.
Enter the phone number or e-mail address of the recipient, then press the
key. The Text: appears in the display.
3.
Enter the text content of your message using the keypad. See “Entering
Text” on page 44 for more information. At any point while composing a
message:
• Press the Left soft key (
) to change the text entry mode. The following text
entry options appear in the display:
– T9 Word
– Abc
– ABC
– 123
– Symbols
– Shortcuts
– Add T9 Word
Use the Up and Down navigation keys to highlight the desired option, then press
the
key.
• Press the Options (right) soft key (
) to complete the message text and set
message send options. The following options appear in the display:
– Edit Send To — Edit the recipient’s number or email address.
– Quick Text — Insert pre-composed text in your message.
– Save As Draft — Save the message to your Draft folder.
– Priority Level — Choose High or Normal.
– Validity Period — Enter the Date when this message will cease to be valid,
then use the Left and Right navigation keys to choose the Time.
OK
OK
Messaging
70
– Enh. Delivery Ack — Choose On or Off — Requests confirmation when your
message is received.
– Add To Contacts — Save the recipient’s number or e-mail address as a
Contacts list entry.
4.
Once you’re finished entering your message, press the
OK
key.
Receive Text Messages
When you receive a message in standby mode, the ringer sounds (unless turned off)
and New Message appears in the display along with the closed envelope icon ( ).
The date and time of the message also appear in the display along with the following
options:
• View Now — Opens the message, where you have the option to Forward, Reply
With Copy, Save Quick Text, Lock, Add To Contacts, Message Info, or Extract.
• View Later — Saves the message to your inbox, where you can view it later, then
returns your phone to standby mode.
Use the Up and Down navigation keys to highlight your choice, then press the
key.
OK
Receive Messages While in a Call
When you receive a message while in a call, New Message appears in the display
along with the closed envelope icon ( ). The date and time of the message also
appear in the display along with the following options:
• View Now — Opens the message, where you have the option to Forward, Reply
With Copy, Save Quick Text, Lock, Add To Contacts, Message Info, or Extract.
• View Later — Saves the message to your inbox, where you can view it later, and
returns your phone to call mode.
Use the Up and Down navigation keys to highlight the desired option, then press the
OK key.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible phones or devices. You
can even accompany a Picture message with a voice memo or preloaded sound.
Tip: You can send a Picture message to up to ten recipients. Enter each recipient’s address or phone
number in a separate Send to field of the Picture message composer.
1.
71
In standby mode, press the Camera key (
screen appears in the display.
). The camera viewfinder
Send Picture Messages in Camera Mode
2.
Using the display as a viewfinder, when the image that you wish to send
appears in the display, press the TAKE key ( OK ) to take a picture.
Note: For more information about using the camera feature in your phone, see “Multimedia” on page 95.
3.
Press the SEND key ( OK ) to save the picture and begin delivery process.
The Create Pic Msg screen then appears in the display with the Send To:
list highlighted.
4.
Enter the phone number or e-mail address of the recipient of the Picture
message, then press the OK key.
Tip: Press the Add (right) soft key (
) to display a pop-up menu containing: Contacts, Groups, and
Recent Calls. These options allow you to find and add recipients to the Send To: list.
5.
The Subject: field appears in the display. Enter a subject for the Picture
message using the keypad. (See See “Entering Text” on page 44 for more
information.)
6.
Press the Down navigation key until the Text: field is highlighted, then
enter the message text using the keypad. (See See “Entering Text” on page
44 for more information.)
7.
Your new picture appears in the Pic: field.
8.
If you wish to insert a sound into your Picture message, use the Down
navigation key to highlight the Sound: field and do the following;
otherwise, proceed to step 10.
• Press the Sounds (left) soft key (
). The My Sounds screen appears in the
display showing the following options:
– Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length, if you record first before
attaching a picture. If a picture is attached before recording, the size of the voice memo is limited to
the amount of remaining memory.
– Audio files list — Select from the list of previously recorded voice memos and
preloaded audio files on your phone.
Use the Up/Down navigation keys to highlight an option, then press the
key to select the option and insert a sound into your message.
Press OK to exit the pop-up menu without inserting a sound.
Messaging
72
OK
9.
Press the Options (right) soft key (
) to complete the message text and
set message send options. The following options appear in the display:
• Preview — View the picture as the recipient will see it.
• Add Quick Text — Add precomposed text to your message.
• Save As Draft — Save the message to your Draft folder.
• Priority Level — Choose High or Normal.
• Validity Period — Enter the Date when this message will cease to be valid,
then use the Left and Right navigation keys to choose the Time.
• Delivery Ack — Choose On or Off — Requests confirmation when your
message is received.
• Remove Pic — Remove the picture from your message.
• Remove Sound — Remove the sound file from your message.
• Add To Contacts — Save the recipient’s number or e-mail address as a
Contacts list entry.
Use the Up/Down navigation keys to highlight an option, then press the
OK key to invoke the option.
10. Press the OK key to send the message. “Pic Msg Sending” appears in
the display and a progress bar indicates the send status.
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or other device, and
accompany the Picture message with a voice memo, ring tone, or downloaded
melody.
Tip: You can send a Picture message to up to ten recipients. Enter each recipient’s address or phone
number in a separate Send To field of the Picture message composer.
1.
In standby mode, press the Messages (Down navigation) key, then press
(for Send Message) and
for Picture Message. The
Create Pic Msg screen then appears in the display with the Send To tab
highlighted and showing the To: list.
Tip: To launch the Create Pic Msg screen using a voice command — In standby mode, press and hold
until the phone prompts, “Say a command.” Say “Send Picture” into the microphone. You
are then prompted to say a Contact name or a number for the first recipient of the message.
2.
Enter the phone number or e-mail address of the recipient using the
keypad, then press the OK key.
Tip: Press the Add (right) soft key (
) to display a pop-up menu containing: Contacts, Groups, and
Recent Calls. These options allow you to find and add recipients to the Send To: list.
73
Send Picture Messages in Standby Mode
3.
The Subject: field appears in the display. Enter a subject for the Picture
message using the keypad. (See “Entering Text” on page 44 for more
information.)
4.
Press the Down navigation key until the Text: field is highlighted, then
enter the message text using the keypad. (See “Entering Text” on page 44
for more information.)
5.
Press the Down navigation key until the Pic: field is highlighted, then press
the Images (left) soft key (
). A photo gallery of thumbnail images
appears in the display.
6.
Use the navigation keys to highlight a picture to be added to your
message, then do the following:
• If you want, press the View (left) soft key (
) to expand the highlighted
picture to full-screen size.
• If you want to include a new picture, press the Camera (right) soft key (
).
Note: For more information about using the camera feature in your phone, see “Multimedia” on page 95.
• Press the OK key to add the highlighted picture to your message.
You are returned to the Create Pic Msg screen with the selected picture in
the Pic: field.
7.
If you wish to insert a sound into your Picture message, use the Down
navigation key to highlight the Sound: field and do the following;
otherwise, proceed to step 8.
• Press the Sounds (left) soft key (
). The My Sounds screen appears in the
display showing the following options:
– Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length, if you record first before
attaching a picture. If a picture is attached before recording, the size of the voice memo is limited to
the amount of remaining memory.
– Audio files list — Select from the list of previously recorded voice memos and
preloaded audio files on your phone.
Use the Up/Down navigation keys to highlight an option, then press the
key to select the option and insert a sound into your message.
Press OK to exit the pop-up menu without inserting a sound.
8.
OK
Press the Options (right) soft key (
) to complete the message text and
set message send options. The following options appear in the display:
• Preview — View the picture as the recipient will see it.
Messaging
74
•
•
•
•
Add Quick Text — Add precomposed text to your message.
Save As Draft — Save the message to your Draft folder.
Priority Level — Choose High or Normal.
Validity Period — Enter the Date when this message will cease to be valid,
then use the Left and Right navigation keys to choose the Time.
• Delivery Ack — Choose On or Off — Requests confirmation when your
message is received.
• Remove Pic — Remove the picture from your message.
• Remove Sound — Remove the sound file from your message.
• Add To Contacts — Save the recipient’s number or e-mail address as a
Contacts list entry.
Use the Up/Down navigation keys to highlight an option, then press the
OK key to invoke the option.
9.
Press the OK key to send the message. “Pic Msg Sending” appears in
the display and a progress bar indicates the send status.
Receive Picture Messages
When you receive a Picture Message in standby mode, the ringer sounds (unless
turned off) and New Message appears in the display along with the closed envelope
icon ( ). The date and time of the message also appear in the display along with
the following options:
• View Now — Retrieves and opens the message, where you have the option to
Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.
• View Later — Saves the message to your inbox, where you can view it later, then
returns your phone to standby mode.
Use the Up and Down navigation keys to highlight the desired option, then press the
OK key.
View a Picture Message Later
75
1.
In standby mode, Messages (Down navigation) key, then press
(for Inbox). The Inbox appears in the display.
2.
If the new picture message is not highlighted, use the Up and Down
navigation keys to highlight the new message.
3.
Press the OK key. “Connecting” appears in the display followed by
“Retrieving” and a progress bar indicating that the message is
downloading to your phone.
Message Boxes
4.
Once a Picture message has been downloaded to your phone, the new
Picture message appears in the display. If the message includes a sound
file, the phone begins playing it.
Note: For more information on viewing and managing received picture messages, see “Inbox” on page 76.
View a Picture Message Now
1.
After you select the View Now option, “Connecting” appears in the
display followed by “Retrieving” and a progress bar indicating that the
message is downloading to your phone.
2.
After the Picture message has downloaded, an alert sounds, and the new
Picture message appears in the display. If the message includes a sound
file, the phone begins playing it.
While viewing your message press the Options (right) soft key (
). The
following options appear in the display:
• Replay — Play the sound file included in the picture message again.
• Forward — Send a copy of this message to another recipient.
• Reply With Copy — Compose and send a reply message to the originator of
the received message and include a copy of the original message.
• Save Sound — Save the sound file included in this message to the My Sounds
folder.
• Save Pic — Save the picture included in this message to the My Images folder.
• Save Quick Text — Save the text in this message as a new Quick Text.
• Lock / Unlock — Block/permit erasure of the highlighted message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Message Info — Shows message delivery status, addressee, size, and so on.
4. Use the Up/Down navigation keys to highlight an option. Press the OK
key to perform the function for the highlighted option.
3.
Note: For more information on received picture message options, see “Inbox” on page 76.
Message Boxes
Your phone stores messages in any one of five message boxes. The subsections that
follow describe each message box in detail.
Inbox
Received messages of all types (except Voicemail) are stored in the Inbox.
1.
In standby mode, press the Messages (Down navigation) key, then press
Messaging
76
for Inbox. A list of incoming messages appears in the display.
Tip: While in a call, press the Options (right) soft key (
menu.
), then press
to open the Messages
2.
Use the navigation keys to highlight the message that you wish to view.
3.
Press the
OK
key to view contents of the highlighted message.
While viewing your message press the Options (right) soft key (
). The
following options appear in the display:
• Forward — Send a copy of this message to another recipient.
• Reply With Copy — Compose and send a reply message to the originator of
the received message and include a copy of the original message.
• Save Sound — Picture Messages Only — Save the audio file (sound) included
in this message to the My Sounds folder.
• Save Pic — Picture Messages Only — Save the picture included in this
message to the My Images folder.
• Save Quick Text — Save the text in this message as a new Quick Text.
• Lock / Unlock — Block/permit erasure of the highlighted message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Message Info — Shows message delivery status, addressee, size, and so on.
• Extract — Calls the sender of the received message.
5. Use the Up/Down navigation keys to highlight an option. Press the OK
key to perform the function for the highlighted option.
4.
Managing Inbox Messages
1.
In standby mode, press the Messages (Down navigation) key, then press
for Inbox. A list of incoming messages appears in the display.
2.
Use the navigation keys to highlight a message in the list.
3.
Press the Erase (left) soft key (
from the Inbox.
) to remove the highlighted message
Press the Options (right) soft key (
). The following options appear in
the display:
• Reply — Compose and send a reply message to the originator of the received
message.
• Reply With Copy — Compose and send a reply message to the originator of
the received message and include a copy of the original message.
• Forward — Send a copy of this message to another recipient.
• Lock / Unlock — Block/permit erasure of the highlighted message.
• Add To Contacts — Save the sender’s number to your Contacts.
77
Message Boxes
• Erase Inbox — Delete all unlocked messages from the Inbox.
• Message Info — Shows message delivery status, addressee, size, and so on.
4. Use the Up/Down navigation keys to highlight an option. Press the OK
key to perform the function for the highlighted option.
Outbox
Your phone stores messages in the Outbox, regardless of whether the message was
successfully transmitted. Verify if and when a message or e-mail was successfully
received by enabling the Enh. Delivery Ack/Delivery Ack feature.
Review Messages in the Outbox
1.
In standby mode, press the Messages (Down navigation) key, then press
for Outbox. Your list of sent messages appear in the display.
2.
Use the navigation keys to highlight a message that you wish to review,
then press the OK key.
While viewing your message press the Options (right) soft key (
). The
following options appear in the display:
• Forward — Send the highlighted message to another recipient.
• Save Quick Text — Save the message text as Quick Text for insertion into
other messages.
• Lock / Unlock — Block/permit erasure of the highlighted message.
• Add To Contacts — Save the recipient’s number to your Contacts.
• Message Info — Shows message delivery status, addressee, size, and so on.
4. Use the Up/Down navigation keys to highlight an option. Press the OK
key to perform the function for the highlighted option.
3.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The time and date of the
message appear in the display, but you cannot access the message until you enter
the lock code.
Managing Outbox Messages
1.
In standby mode, press the Messages (Down navigation) key, then press
for Outbox. Your list of sent messages appear in the display.
2.
Use the navigation keys to highlight a message.
3.
Press the Erase (left) soft key (
from the Inbox.
Press the Options (right) soft key (
the display:
) to remove the highlighted message
). The following options appear in
Messaging
78
• Forward — Send the highlighted message to another recipient.
• Resend — Re-send the highlighted message to the original recipient.
• Lock / Unlock — Block/permit erasure of the highlighted message.
• Add To Contacts — Save the recipient’s number to your Contacts.
• Erase Outbox — Delete all unlocked messages from the Outbox.
• Message Info — Shows message delivery status, addressee, size, and so on.
4. Use the Up/Down navigation keys to highlight an option. Press the OK
key to perform the function for the highlighted option.
Draft Box
Messages in the Draft Box are those that have been composed but never sent. You
can return to the Draft Box at any time to view, edit, or send a draft message.
Create a Draft Message
79
1.
In standby mode, press the Messages (Down navigation) key, then press
(for Send Message) and select one of the following Send
Message options:
• Text Message
• Picture Message
The Create Txt Msg screen or Create Pic Msg screen appears in the
display showing the To: list.
2.
Enter the phone Number or E-Mail address of a recipient, then press the
OK key.
3.
Compose your message using the keypad, then press the Options (right)
soft key (
).
4.
Use the Up/Down navigation keys to highlight Save As Draft, then press
the OK key. A confirmation message appears in the display and your
message is saved to the Drafts box.
Message Boxes
View and Edit Draft Text Messages
1.
In standby mode, press the Messages (Down navigation) key, then press
for Drafts. A list of any draft messages that you’ve saved appears
in the display.
2.
Use the navigation keys to highlight a text message that you wish to view
or edit, then press the EDIT key ( OK ). The message text edit screen
appears in the display.
3.
Enter or change the recipient’s number and/or e-mail address and the
message text using the keypad. (See “Entering Text” on page 44 for more
information.)
Press the Options (right) soft key (
) to complete the message text and
set message send options. The following options appear in the display:
• Preview — Picture Message — View the message as it will appear to the
recipient(s).
• Edit Send To — Text Message — Change, add, or remove recipients from this
message.
• Add Quick Text — Insert pre-composed text into your message text.
• Save As Draft — Save the message to your Drafts box.
• Priority Level — Choose High or Normal.
• Validity Period — Enter the Date when this message will cease to be valid,
then use the Left and Right navigation keys to choose the Time.
• Delivery Ack — Picture Message — Choose On or Off — Requests
confirmation when your message is received.
• Enh. Delivery Ack — Text Message — Choose On or Off — Requests
confirmation when your message is received.
• Remove Pic — Picture Message — Remove the current picture from this
message.
• Remove Sound — Picture Message — Remove the current sound file from
this message.
• Add To Contacts — Save the recipient’s number or e-mail address to your
Contacts.
5. Use the Up/Down navigation keys to highlight the desired option, then
press the OK key to perform the function for the highlighted option.
4.
6.
When you have completed composing your message, press the
to send it.
OK
key
View and Edit Draft Pic. Messages
1.
In standby mode, press the Messages (Down navigation) key, then press
for Drafts. A list of any draft messages that you’ve composed
Messaging
80
appears in the display.
2.
Use the navigation keys to highlight the picture message that you wish to
view, then press the EDIT key ( OK ). The message edit screen appears in
the display.
Make any needed changes and press the Options (right) soft key (
).
The following options appear in the display:
• Preview — Shows the message contents.
• Add Quick Text — Insert pre-composed text into your message text.
• Save As Draft — Saves the changed message to the Draft Box.
• Priority Level — Choose High or Normal.
• Validity Period — Enter the Date when this message will cease to be valid,
then use the Left and Right navigation keys to choose the Time.
• Delivery Ack — Choose On or Off — Requests confirmation when your
message is received.
• Remove Pic — Remove image included in draft message.
• Remove Sound — Remove sound file included in draft message.
• Add To Contacts — Save the recipient’s number or e-mail address to your
Contacts.
4. Use the Up/Down navigation keys to highlight an option. Press the OK
key to perform the function for the highlighted option.
3.
Managing Draft Messages
1.
In standby mode, press the Messages (Down navigation) key, then press
for Drafts. A list of any draft messages that you’ve composed
appears in the display.
2.
Use the Up/Down navigation keys to highlight a message.
3.
Press the Erase (left) soft key (
from the Drafts box.
) to remove the highlighted message
Press the Options (right) soft key (
). The following options appear in
the display:
• SEND — Send the highlighted message to the original recipient, if the
recipient’s number and/or e-mail address is included with the draft message.
• Lock / Unlock — Block/permit erasure of the highlighted message.
• Add To Contacts — Save the recipient’s number and/or e-mail address to your
Contacts.
• Save Quick Text — Save the message text as Quick Text for insertion into
other messages.
• Erase Drafts — Delete all unlocked draft messages.
81
Message Boxes
4.
Use the Up/Down navigation keys to highlight an option. Press the
key to perform the function for the highlighted option.
OK
Voicemail
Messages in your voice mailbox are logged in the Voicemail box of the Messages
menu. Open the Voicemail box to view the Callback # (if available), Urgency, and
other details of the Voicemail message.
Listen to Voicemail Now
Once you’ve received a new voicemail message, you have the option to either:
• Listen Now — Calls your voice mailbox and allows you to listen to your
messages.
• Listen Later — Returns you to standby mode where you can later choose to call
your mailbox and review your messages.
1.
Use the Up and Down navigation keys to highlight the desired option, then
press the OK key.
Listen to Voicemail Later
If you have chosen to review your voicemail messages at a later time:
1.
In standby mode, press the Messages (Down navigation) key, then press
for Voicemail. The Voicemail screen appears in the display,
showing the number of new voicemail messages received and the date
and time the latest message was received.
2.
Press the
key or the
to the message.
Note: You can also press and hold
OK
key to call your voice mailbox and listen
to dial your voice mailbox.
Messaging
82
Erase Messages
You can erase all of the messages in each your boxes from one convenient location.
Note: This function erases all messages in the selected box. To delete a single message, open the box from
the Messages menu, then delete the message from the Options menu while viewing the message
content.
In standby mode, press the Messages (Down navigation) key), then press
for Erase Messages. The following options appear in the display:
• Inbox — Deletes all unlocked messages stored in the Inbox.
• Outbox — Deletes all unlocked messages stored in the Outbox.
• Drafts — Deletes all unlocked messages stored in the Drafts box.
• All Messages — Deletes all unlocked messages stored in all of the message
boxes, except Voicemail.
2. Use the Up/Down navigation keys to highlight the box containing the
messages that you wish to delete.
1.
3.
Press the OK key. You’re prompted to confirm the erasure of all
messages in the selected box or in all boxes.
4.
Press the Yes (left) soft key (
) to delete the messages. Press the No
(right) soft key (
) cancel deleting the messages.
Message Settings
Use the Msg Settings sub-menus to define settings for general, text, and picture
messages.
General Message Settings
1.
83
In standby mode, press the Messages (Down navigation) key, then press
(for Msg Settings) and
for General. The following options
appear in the display.
• Auto Save — Choose whether your messages are saved automatically when
you exit them (On, Off, Prompt).
• Auto Erase — Choose to receive (On) or not receive (Off) a warning message
when you delete a message.
• Quick Text — Edit your pre-composed messages, which can then be inserted
into new messages.
• Voicemail # — Edit or view your Voicemail number.
• Entry Mode — Choose the default method for entering text into messages (T9
Word, Abc, ABC, 123).
• Callback # — Choose whether to include a callback phone number with your
outgoing messages, and enter the number to be included.
Message Settings
• Signature — Choose whether to include a text signature in outgoing message
text, and enter the text to be included.
• Reminder — Select whether and how often you will hear and/or feel a
reminder that you have received a message (Once, Every 2 Minutes, Every
15 Minutes, Off).
2. Use the Up/Down navigation keys to highlight the desired option. Press the
OK key to enter the highlighted option’s sub-menu.
Editing and Entering Quick Text
1.
In standby mode, press the Messages (Down navigation) key, then press
(for Msg Settings),
(for General), and
for Quick
Text. The Quick Text sub-menu appears in the display.
2.
Use the Up/Down navigation keys to highlight a Quick Text you want to
change, then press the OK key. (You cannot change the pre-defined
Quick Text included with your phone.)
Press the New (right) soft key (
) to create a new Quick Text.
Tip: You can also create new Quick Text by viewing/editing an Outbox message and using the Save Quick
Text option in the Options menu. See “Review Messages in the Outbox” on page 78 for more
information.
3.
Enter/change the text content of your Quick Text using the keypad. (See
“Entering Text” on page 44 for more information.)
Press the Left soft key (
4.
) to change Text Input Mode.
Once you’re finished entering your Canned Msg., press the OK key. The
Quick Text menu appears in the display with your new Canned Msg.
highlighted.
Text Message Settings
In standby mode, press the Messages (Down navigation) key, then press
(for Msg Settings) and
for Text Message. The following
options appear in the display.
• Auto View — On/Off — With Auto View On, the full content of a text message
appears in the display as the messages is received.
• Signature — Create a signature, which can be included at the bottom of
outgoing message text.
• Auto Scroll — On/Off — With Auto Scroll On, the full content of a text
message automatically rolls upward on the display, one screen-full at a time.
2. Use the Up/Down navigation keys to highlight the desired setting. Press
the OK key to enter the highlighted option’s sub-menu.
1.
Messaging
84
Picture Message Settings
In standby mode, press the Messages (Down navigation) key, then press
(for Msg Settings) and
for Picture Message. The
following options appear in the display.
• Auto Receive — On/Off — With Auto Receive On, Picture messages
automatically download and display as they are received. With Auto Receive Off,
you are prompted to download Picture messages.
• Signature — Create a signature, which can be included at the bottom of
outgoing Picture message text.
2. Use the Up/Down navigation keys to highlight the desired setting. Press
the OK key to enter the highlighted option’s sub-menu.
1.
85
MetroWEB
Section 9: MetroWEB
Topics Covered
• MetroWEB
• Launching MetroWEB
• Using MetroWEB
• Using Links
• How MetroWEB Keys Work
This section outlines how to launch MetroWEB, how to navigate to other pages on
the web, and how the keys on the keypad are used with the web application.
Additionally, links to other sites are briefly discussed.
MetroWEB
With MetroWEB, you can conveniently surf the web and download ringtones and
wallpapers using your phone. Each time you launch MetroWEB, your phone connects
to the Internet and the service indicator icon (
) appears in the display.
Stored Web Content
MetroWEB ends an Internet connection after a certain period of inactivity, however
some information from your session remains stored in the phone (if you leave your
phone turned on). You can access this information without reconnecting to the
Internet. However, if you are viewing stored information, and you select a link to a
site that was not accessed in your last session, you automatically re-connect to the
Internet.
Launching MetroWEB
1.
Open the QWERTY keypad.
Note: MetroWEB is only accessible using the QWERTY keypad.
MetroWEB
86
In standby mode, do one of the following to launch MetroWEB:
• Press the Left navigation key.
• Press the MENU (left) soft key (
), then press
(for MetroWEB) and
for Get In Web.
3. A list of categories (each representing one or more web sites) appears in
the display.
2.
4.
Use the navigation keys to browse the categories.
5.
Once the desired category is highlighted, press the
(
) to enter the category list.
(left) soft key
Exit MetroWEB
䊳
To exit MetroWEB, press
or close the QWERTY keypad.
Using MetroWEB
When you use MetroWEB, some of the keys operate differently than during a normal
phone call. MetroWEB presents on-screen items in any of the following ways:
• Text or numeric input.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by using the soft keys.
MetroWEB soft keys
At the bottom of the MetroWEB display is a bar that contains browser commands.
The Left and Right (
) soft keys on the keypad are used to execute the
commands that appear in their respective corners of the display. These are called
“soft keys” because their functions change depending on the application.
Using Links
Links have several purposes, such as jumping to a different page, to a different site,
or even initiating a phone call. Links are shown inside of brackets ([ ]). You can
normally use the Left soft key (
) to select a link when it is highlighted.
87
How MetroWEB Keys Work
How MetroWEB Keys Work
The following table lists MetroWEB keys and their functions.
navigation keys — Use to browse lists and options
OK
Back Key — A browse, back-up key. Press once to back up
one page. Press and hold to go back to home page.
Press to clear the last number, letter, or symbol entered. Press
and hold to completely clear the display.
SHIFT Key — Press before entering text to enable uppercase
characters.
Spacebar — Press to insert a space when entering text.
Number 1 thru 0 — Use the number keys to select items in a
menu if they are numbered.
End Key — Press to exit the MetroWEB and return the phone
to standby mode.
Left Soft Key — Press to activate the command that appears
above it in the display.
Right Soft Key — Press to activate the command that
appears above it in the display.
MetroWEB
88
Section 10: Voice SVC
Topics Covered
• Voice SVC Options
• Voice Command
• Voice Settings
This section explains how you can use and customize your phone’s VoiceSignal
voice recognition feature.
Note: Although the procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
Voice SVC Options
Your SCH-r410 includes VoiceSignal, state-of-the-art voice recognition software that
lets you use your voice to dial numbers, access your Contacts list, and open Tools. To
access your phone’s voice recognition, do the following:
In standby mode, press the MENU (left) soft key (
), then press
for Voice SVC. The following options appear in the display:
• Voice Command — Lets you place calls, access your Contacts List, review
your appointments, and more by speaking commands into your phone. Also see
"Voice Dialing" on page 24. and “Voice Method” on page 50 for more
information.
• Voice Settings — Lets you tailor VoiceSignal to better respond to your voice
and your phone use preferences. See “Digit Dialing” on page 91 for more
information.
2. Use the Up/Down navigation keys to highlight the desired sub-menu, then
press the OK key.
1.
89
Voice Command
Voice Command
To access the Voice Command menu, do one of the following:
• In standby mode, press and hold the
key.
“Say a Command” appears in the display and is pronounced through the
earpiece, followed by a list of available commands.
• In standby mode, press the MENU (left) soft key (
), then press
(for
Voice SVC) and
for Voice Command.
Note: You can also set your phone to start VoiceSignal when you connect an optional headset to the phone.
(For more information, see "Voice Launch" on page 94.)
The following voice commands appear in the display:
• Call — Lets you dial the phone by saying any name stored in your contact list,
without ever having to record, or “train” that name. VoiceSignal automatically
voice-activates all your contacts, even if you have hundreds of them stored on
your phone. You can also dial any telephone number, even if it is not stored in your
contact list, by saying the digits in the number. (See “Voice Dialing” on page 24 for
more information.)
• Send Text — Lets you access Create Text Message.
• Send Picture — Lets you access Create Picture Message.
• Lookup — Lets you find a Contact by name and review the Contact’s information.
• Go to — Lets you access the following list of your phone’s features and functions:
– Voice Memo
– Calendar
– Contacts
• Check — Lets you say a single command (such as “Status”) to verify your
phone's: Status, Signal, Network, Battery, or My phone #.
Note: Speaking clearly, say the command that you want to use. If VoiceSignal does not recognize a
command, it prompts you to repeat the command. If VoiceSignal still does not recognized the
command, it tells you “Sorry, no match found” and cancels voice recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice SVC
90
Voice Settings
Choice Lists
When VoiceSignal cannot recognize a name or number, it displays a choice list of up
to three possible choices, and prompts you to confirm the correct one.
You can select how VoiceSignal will use choice lists with name dialing, digit dialing,
and contacts.
To change the way VoiceSignal uses choice lists:
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Voice SVC),
(for Voice Settings), and
for
Choice Lists.
Use the Up/Down navigation keys to highlight the Choice List behavior you
prefer:
• Automatic — VoiceSignal displays a choice list only when it is not sure if it has
correctly recognized the name or number.
• Always On — VoiceSignal always displays a choice list, even when there is
only one choice.
• Always Off — VoiceSignal never displays a choice list.
3. Press the OK key or the OK (left) soft key (
) to accept the new
setting. Press the
key to discard the new setting and return to the
Voice Settings menu.
2.
Sensitivity
1.
In standby mode, press the MENU (left) soft key (
(for Voice SVC),
(for Voice Settings), and
), then press
for Sensitivity.
2.
Use the Up and Down navigation keys to adjust the selected Sensitivity
setting incrementally between Reject More spoken commands or names
and Reject Less spoken commands or names.
3.
Press the OK key or the OK (left) soft key (
) to accept the new
setting. Press the
key to discard the new setting and return to the
Voice Settings menu.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the numbers you say, try
adapting digit dialing to your voice. Adapting can improve the accuracy of digit
recognition, especially for people with strong regional accents.
91
Voice Settings
Note: After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will not
be able to use it unless they reset the phone to factory defaults.
Adaptation involves recording several sequences of four digits each. The recording
process takes about a minute.
Tips for Adapting Digit Dialing
• Use Adapt Digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there is an
unexpected noise that spoils the recording, re-record that sequence.
• Only adapt digits if you are regularly having problems with digit dialing. Once you
adapt, digit dialing will not work as well for other people using your phone. (You
can always reset digit adaptation to its original state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
In standby mode, press the MENU (left) soft key (
), then press
(for Voice SVC),
(for Voice Settings), and
for
Digit Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
2. Use the Up/Down navigation keys to highlight Adapt Digits, then press the
OK key. Your phone displays text describing the Adapt Digits process.
1.
3.
Press the OK key. Your phone displays the first digit sequence and
“Please say” plays through the speaker followed by the four digits
appearing in the display.
4.
Wait for the beep and say the digits using your normal tone of voice. After
a moment, the phone plays back the recording and prompts “Did the
recording sound ok?”
• If the recording was good, say “Yes.”
• If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
Voice SVC
92
5.
After confirming that the recording sounds “ok”, continue the recording
process with the next set of digits.
6.
After 10 sets of digits, the phone asks whether you want to do more
adaptation. Answer “Yes.”
7.
Repeat steps 4 and 5 for another 10 sets of digits. After the second group
of 10 sets of digits, “Adaptation complete” plays through the speaker and
you are returned to the Digit Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
In standby mode, press the MENU (left) soft key (
), then press
(for Voice SVC),
(forfor Voice Settings), and
for Digit
Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
2. Use the Up/Down navigation keys to highlight Reset Digits, then press the
OK key. The phone prompts you to confirm digit rest.
1.
3.
Press the OK (left) soft key (
) to reset your digit adaptation, or press
the Back (right) soft key (
) to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
In standby mode, press the MENU (left) soft key (
), then press
(for Voice SVC),
(for Voice Settings), and
for
Sound. The following options appear in the display:
• Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
• Names — On/Off — Enables or disables name playback.
• Name Settings — Lets you adjust the Speed (Faster or Slower) and Volume
(Louder or Softer) of your phone’s audio name playback.
2. Use the Up and Down navigation keys to highlight the desired option, then
press the OK key.
1.
93
3.
Use the Up and Down navigation keys to highlight the desired setting.
4.
Press the OK key or the OK (left) soft key (
) to accept the new
setting. Press the
key to discard the new setting and return to the
Sound menu.
Voice Settings
Voice Launch
To set the key or action that launches VoiceSignal, do the following:
In standby mode, press the MENU (left) soft key (
), then press
(for Voice SVC),
(for Voice Settings), and
for Voice
Launch. The following options appear in the display:
• Key Only — Press and hold
to activate VoiceSignal for one call.
• Key/EarMic — Attach a headset to your phone. Press and hold
or
press and hold the button on the headset to activate VoiceSignal.
2. Use the Up/Down navigation keys to highlight the option you want, then
press the OK key or the OK (left) soft key (
) to save and exit. Press
the
key to discard the new setting and return to the Voice Settings
menu.
1.
About
This option causes the About VoiceSignal screen to appear in the display, showing
version and build information about the VoiceSignal software included on your
phone.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Voice SVC),
(for Voice Settings), and
for
About.
The About VoiceSignal screen appears in the display showing the version
level of the VoiceSignal software currently installed on your phone.
Voice SVC
94
Section 11: Multimedia
Topics Covered
• Camera
• Using My Images Gallery
• Using My Ringtones Gallery
• Using My Sounds Gallery
Use your SCH-r410 phone to take full color digital pictures, display them on your
phone’s vivid color display, and instantly share them with family and friends.
With Mobile Shop, you can download personalized ringtones, pictures, and more.
For more information, contact your Wireless Carrier.
Note: Although the procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
95
Camera
Camera
Taking Pictures
Taking pictures with the built-in camera is as simple as choosing a subject, pointing
the lens [located on the outside of the folder (above the external display)], and
pressing a button.
Simple Snap Shot
To take a single picture using the current camera settings, do the following:
1.
In standby mode, press the Camera key (
phone.
) on the right side of the
The message “Loading...” followed by a camera viewfinder screen
appears in the display. (See “Camera Screen” on page 97 for more
information.)
Note: You can also activate the camera (from standby mode) by press the MENU (left) soft key (
then press
(for Multimedia) and
for Camera.
),
2.
Point the camera lens at your subject.
3.
Using the display as a viewfinder, press the
you wish to capture appears in the display.
4.
Press the Save (left) soft key (
) to save the picture to the Image gallery
in your phone, a part of the phone’s memory devoted to storing, browsing,
and viewing saved pictures.
OK
key when the image that
Press the SEND key ( OK ) to save the picture and include it in a Picture
message. (See “Send Picture Messages in Camera Mode” on page 71 for
more information.)
Press the Erase (right) soft key (
) to erase the photo.
Tip: You can change a number of the camera’s settings to suit particular uses for your pictures. See
“Camera Shortcuts” on page 98 for more information.
Multimedia
96
Camera Screen
When you activate your phone’s camera, the second
line of the display is reserved for the current camera
resolution setting and the picture counter. The center
of the display shows a viewfinder image of the
subject at which the camera is pointed. The soft key
labels on the bottom line of the display change to the
following:
• My Images — Pressing the Left soft key (
)
opens the My Images gallery so you can view or
manage your stored pictures.
• TAKE — Pressing the OK key takes a
picture of the image currently appearing on
the display.
• Options — Pressing the Right soft key
(
) opens a pop-up menu of camera
settings.
Camera Screen Icons
Camera — Indicates that your phone is in Camera mode.
Night Shot — Replaces the Camera icon. Indicates that your
phone is ready to take photos in low light.
Resolution — Indicates the current Resolution setting
(640x480 shown).
Brightness — Indicates the current photo Brightness
setting [0 (no Brightness) shown]. The direction arrows
indicate that the Up and Down navigation keys adjust the
Brightness setting.
Zoom — Indicates the current Zoom setting [0 (no Zoom)
shown]. The direction arrows indicate that the Left and Right
navigation keys adjust the Zoom setting.
97
Camera
Memory Counter — Indicates the maximum number of
photos you can take at the current Resolution and Quality
settings.
Quality — Indicates the current photo Quality setting (Fine
shown).
White Balance — Indicates the current photo White Balance
setting (Auto shown).
Self Timer — Delays the camera shutter by either 2, 5, or 10
seconds after you press the
OK
key.
Multi Shot — Automatically or manually
takes multiple pictures in sequence after you
press the OK key.
Camera Shortcuts
You can use the Navigation Keys to quickly access both the Brightness and Zoom
capabilities of the built in camera. When you exit the camera mode, all camera
settings return to default values.
Brightness
1.
In camera mode, change the brightness of your pictures using the Up and
Down navigation keys. Options are +4 – -4.
2.
Press the
OK
key to take the picture.
Zoom in on a Subject
Your camera has digital zoom capabilities of up to x2 with Resolution set to
320x240, and up to x3 with Resolution set to 160x120.
Note: Pictures may appear somewhat grainy as you zoom in; this is a normal result of digital enhancement.
Note: The Zoom setting is affected by the Resolution setting (camera mode). With Resolution set to
640x480, no zoom is available. With Resolution set to 320x240 and lower, Zoom settings 0 – 2 are
available. With Resolution set to 160x120 and lower, Zoom settings 0 – 3 are available.
1.
In camera mode, press the Left and Right navigation keys to zoom in and
out on your subject.
2.
Press the
OK
key to take the picture.
Multimedia
98
Camera Options
The Camera Options let you temporarily override your default camera settings. Any
settings you change using the Camera Options only apply to the current camera
session or until you make another change using the Camera Options.
Delay Pictures with the Self Timer
Self Timer lets you delay a picture long enough so you or the person taking the
picture can join others in the picture.
In camera mode, press the Options (right) soft key (
). The following
options appear in the display:
• Self Timer
• Multi Shot
• Quality
• Resolution
• White Balance
• Color Effects
• Settings
2. Use the Left and Right navigation keys to highlight Self Timer. The
following options appear in the display:
• Off
• 2 Seconds
• 5 Seconds
• 10 Seconds
3. Use the Up/Down navigation keys to highlight the desired delay, then press
the OK key. The camera screen appears in the display.
1.
The next time you press the OK key, a countdown timer appears in the
display that indicates the time remaining before the camera takes the
picture.
Multi Shot
Multi Shot lets you take multiple pictures in succession at the touch of the TAKE key
( OK ).
1.
In camera mode, press the Options (right) soft key (
menu bar appears in the display.
). The options
2. Use the Left and Right navigation keys to highlight Multi Shot. The
following options appear in the display:
• Off
• On (3 pictures taken in succession).
99
Camera
3. Use the Up and Down navigation keys to highlight the desired option, then
press the
(
OK
key to save the option. The Multi Shot icon
) appears in the display.
The next time you press the
in rapid succession.
OK
key, the camera takes several pictures
Quality
1.
In camera mode, press the Options (right) soft key (
menu bar appears in the display.
). The options
Use the Left and Right navigation keys to highlight Quality. The following
options appear in the display:
• Fine
• Normal
• Economy
3. Use the Up/Down navigation keys to highlight the desired picture quality
setting, then press the OK key. The camera applies the selected Quality
setting to your next picture.
2.
Resolution
1.
In camera mode, press the Options (right) soft key (
menu bar appears in the display.
). The options
Use the Left and Right navigation keys to highlight Resolution. The
following options appear in the display:
• 480x640
• 240x320
• 120x160
3. Use the Up/Down navigation keys to highlight the desired resolution
setting, then press the OK key. The camera applies the selected
Resolution setting to your next picture.
2.
White Balance
White Balance allows you to adjust picture quality according to available light.
1.
In camera mode, press the Options (right) soft key (
options appear in the display:
• Self Timer
• Multi Shot
• Quality
• Resolution
• White Balance
). The following
Multimedia
100
• Color Effects
• Settings
2. Use the Left and Right navigation keys to highlight White Balance. The
following White Balance options appear in the display:
• Auto — The camera automatically adjusts picture quality to available light.
• Sunny — Use this setting when taking pictures in full sun.
• Cloudy — Use this setting when taking pictures in cloudy conditions.
• Tungsten — Use this setting when taking pictures under incandescent lights.
• Fluorescent — Use this setting when taking pictures under fluorescent lights.
3. Use the Up/Down navigation keys to highlight one of the White Balances,
then press the
key, the camera applies the selected White Balance
setting to your next picture.
OK
Color Effects
Color Effects lets you change your pictures from full-color to two-color, (black plus a
color you select).
In camera mode, press the Options (right) soft key (
). The following
options appear in the display:
• Self Timer
• Multi Shot
• Quality
• Resolution
• White Balance
• Color Effects
• Settings
2. Use the Left and Right navigation keys to highlight Color Effects, then
press the OK key. The following Color Effects options appear in the
display:
• Normal (full-color)
• Black&White (monochrome)
• Sepia
• Aqua
• Antique
• Negative
• Sketch
• Emboss
1.
101
Camera
3.
Use the Up/Down navigation keys to highlight one of the Color Tones, then
press the OK key, the camera applies the selected Color Tone setting to
your next picture.
Settings
Camera Settings (unlike other Camera Options) do not return to their respective
default values when you end the current Camera session. Instead, Camera Settings
apply to future Camera sessions until you change individual Settings values or until
you use Reset Settings.
Shutter Sounds
Choose from three different sounds whenever you take a picture. Aside from being a
cool sound effect, Shutter Sounds acts as an audible reminder that your camera has
taken the picture.
1.
In camera mode, press the Options (right) soft key (
menu bar appears in the display.
). The options
2.
Use the Left and Right navigation keys to highlight Settings.
Use the Up and Down navigation keys to highlight Shutter Sound, then
press the OK key. The following options appear in the display:
• Off — No Shutter Sound plays when you press the TAKE key ( OK ).
• Shutter
• OK
• Ding Dong
4. Use the Up and Down navigation keys to highlight the desired Shutter
Sound (each sound plays as it is highlighted) setting, then press the OK
key. The camera applies the selected Shutter Sound setting to your next
picture.
3.
Reset Settings
1.
In camera mode, press the Options (right) soft key (
menu bar appears in the display.
). The options
2.
Use the Left and Right navigation keys to highlight Settings.
Use the Up and Down navigation keys to highlight Reset Settings, then
press the OK key. The following options appear in the display:
• Off — Keeps the current camera settings.
• On — Resets the camera settings to default values.
Night Shot
3.
Night Shot lets you take pictures in low light without a flash.
Multimedia
102
Note: To avoid blurred pictures when taking Night Shots, hold your phone very steady for two seconds after
pressing the TAKE key ( OK ).
1.
In camera mode, press the Options (right) soft key (
menu bar appears in the display.
). The options
2.
Use the Left and Right navigation keys to highlight Settings.
Use the Up and Down navigation keys to highlight Night Shot, then press
the OK key. The following options appear in the display:
• Off
• On
4. Use the Up and Down navigation keys to highlight the Night Shot setting of
your choice, then press the OK key. You’re returned to the camera
viewfinder screen.
3.
Using My Images Gallery
My Images lets you manage your photos and pictures you download, and lets you
choose the pictures that appear in your phone’s display when you turn it on or off,
while in standby mode (wallpaper), and as image IDs for your contacts.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Multimedia) and
for My Images. A multiple-page matrix of
thumbnail views of saved photos and images appears in the display.
2.
Use the navigation keys to highlight an image or photo.
3.
Press the Camera (left) soft key (
Press the VIEW key (
screen.
OK
) to take new photos.
) to expand the highlighted image to fill the
Press the Options (right) soft key (
). The following options appear in
the display:
• Send — Send to someone as part of a Picture message. (See “Send Picture
Messages in Standby Mode” on page 73 for more information.)
• Set As — Lets you set the highlighted image as the Main Wallpaper or as a
Picture ID for one of your Contacts.
• Rename — Change the file name for the highlighted image.
• Lock / Unlock — Block/permit erasure of the highlighted image.
• Erase — Erase the highlighted image.
• Erase All — Erase all unlocked images from My Images.
• Photo Info — Shows the image file’s name, date and time, resolution, and size.
103
Using My Ringtones Gallery
4.
Use the Up/Down navigation keys to highlight an option, then press the
OK key.
5.
Press the
key to return to the previous menu, or press the
key to return to standby mode.
Using My Ringtones Gallery
My Ringtones lets you assign ringtones for calls, alarms, and other alerts.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Multimedia) and
for My Ringtones. A list of ringtones
appears in the display.
2.
Use the navigation keys to highlight a ringtone.
3.
Press the Set As (left) soft key (
) to assign the highlighted ringtone to
be used as a Ringtone, Contact ID, or as an Alert Tone.
Press the PLAY key (
OK
) to hear the ringtone.
Press the Info (right) soft key (
highlighted ringtone.
4.
) to show title and file type for the
Press the
key to return to the previous menu, or press the
key to return to standby mode.
Using My Sounds Gallery
My Sounds lets you record and manage voice memo files and assign melodies as
ringers or alerts.
1.
In standby mode, press the MENU (left) soft key (
(for Multimedia) and
for My Sounds.
), then press
The following options appear in the display:
• Record New — Lets you record voice memos.
• A list of recorded voice memo files and melodies.
2. Use the navigation keys to highlight a file.
When you highlight Record New and press the OK key, the Record
New screen appears in the display.
• Press the REC key ( OK ) to start recording a voice memo.
• Press the Pause (left) soft key (
) to pause/resume recording.
• Press the SAVE key ( OK ) to stop recording and save the voice memo.
4. When you highlight a saved voice memo file, you have the following
options:
3.
Multimedia
104
• Press the Erase (left) soft key (
) to erase the selected voice memo file, if it
is unlocked.
• Press the PLAY key ( OK ) to listen to the voice memo.
• Press the Options (right) soft key (
), and the following options appear in the
display:
– SEND — Send to someone as part of a Picture message. (See “Send Picture
Messages in Standby Mode” on page 73 for more information.)
– Rename — Change the name of the voice memo file.
– Lock / Unlock — Block/permit erasure of the highlighted image.
– Erase all — Erase all unlocked voice memos.
– Sound Info — Shows the title, size, type, and date for the file.
5. When you highlight a melody file, you have the following options:
• Press the PLAY key ( OK ) to hear the ringtone.
• Press the Options (right) soft key (
) to show the following options:
– SEND — Send to someone as part of a Picture message. (See “Send Picture
Messages in Standby Mode” on page 73 for more information.)
– Set As — assign the highlighted ringtone to be used as a Ringtone, Contact
ID, or as the Alert Tone.
– Erase all — Erase all unlocked melodies.
– Sound Info — Shows the title, size, type, and date for the file.
6. Press the
key to return to the previous menu, or press the
key
to return to standby mode.
105
Accessing Your Phone’s Tools
Section 12: Tools
Topics Covered
• Accessing Your Phone’s Tools
• Bluetooth
• Calendar
• Memo Pad
• Alarm Clock
• World Time
• Calculator
• Stop Watch
• Converter
• Tip Calculator
This section explains how you can use your phone’s Personal Information Manager
(PIM) functions to view today’s calendar, schedule appointments, set an alarm,
perform simple math calculations, and more.
Note: Although the procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
Accessing Your Phone’s Tools
To launch the Tools menu:
䊳
In standby mode, press the MENU (left) soft key (
for Tools. The Tools menu appears in the display.
), then press
Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Tools
106
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth features available. When
the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To
save battery life or in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology headset.
To turn Bluetooth support on:
䊳
From the Tools menu, press
(for Bluetooth),
tooth Settings), and
for Enable.
“Bluetooth set to on” and the black Bluetooth On icon (
display.
(for Blue) appear in the
To turn Bluetooth support off:
䊳
From the Tools menu, press
(for Bluetooth),
tooth Settings), and
for Disable.
(for Blue-
“Bluetooth set to off” appears in the display and the and the black
Bluetooth On icon ( ) disappears.
Add New Device
To search for available Bluetooth devices:
From the Tools menu, press
for Bluetooth. The following options
appear in the display:
• Add New Device
• Registered List
• Bluetooth Settings
2. Highlight Add New Device and press the OK key.
1.
If Bluetooth is off, you are prompted to “Turn Bluetooth on?”. Press the Yes
(left) soft key (
) to turn Bluetooth on.
Note: Press the No (right) soft key (
) to leave Bluetooth off and return to the Bluetooth sub menu.
“Place device you are connecting to in discoverable mode” appears in
the display.
107
Bluetooth
3.
Place the Bluetooth device in discoverable mode. (See the device user
manual for more information.)
4.
Press the
display.
5.
Use the navigation keys to highlight the device you want to pair with your
phone.
6.
Press the PAIR key ( OK ) to pair the selected device with the phone. You
are prompted to enter the passkey or PIN for the selected device.
7.
Enter the device passkey or PIN and press the OK key. Pop-up
messages appear to inform you that pairing with the device and
connecting to it are complete.
OK
key. Names of the available devices appears in the
Registered List
This menu provides a list of Bluetooth wireless
technology devices discovered by your handset.
From the Tools menu, press
for
Bluetooth. The following options appear in
the display:
• Add New Device
• Registered List
• Bluetooth Settings
2. Highlight Registered List and press the OK
key. A list of registered Bluetooth devices appears in the display.
1.
Connecting to a Bluetooth Device
From the Registered List,
1.
Highlight the device and press the
2.
If you are unable to connect with the device a pop-up appears in the
display. Press the Yes soft key to retry.
OK
key.
Disconnecting from a Bluetooth Device
From the Registered List,
䊳
Highlight the device and press the Off soft key.
Tools
108
Managing Your Registered List
From the Registered List,
Highlight a device and press the Options soft key. The following options
appear in the display:
• Remove Device — Deletes the device from the Registered List.
• Rename Device — Lets you change or replace the device name, as needed.
• Device Info — Shows the type of device, status, address, the date when it was
paired with your phone, and the date the device was last connected with your
phone.
2. Highlight the desired option and press the OK key to access that option.
1.
Bluetooth Settings
Enable/Disable
Selecting this option turns Bluetooth on or off. (For more information, see "Turn
Bluetooth On/Off" on page 107.)
Discovery Mode
Allows other users to see your accessibility. Select On for other devices to see your
device, or Off for no visibility.
Device Name
Shows the handset name. You may change this name. Enter the text and press the
OK key.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
Calendar
Calendar allows you to view the current, past, or future
month in calendar format. While viewing the calendar,
the current date is highlighted, and days with scheduled
events are surrounded by a box.
View an Event
1.
109
From the Tools menu, press
Calendar.
for
Calendar
2.
A calendar appears in the display with the current date highlighted. The
month and year appear at the top of the display.
Use the navigation keys to highlight different dates within the current
month.
• Press OK to open a date that is highlighted.
• Press the Up volume key to view previous months.
• Press the Down volume key to view future months.
4. Press the VIEW key ( OK ) to display a list of events on the highlighted
date.
3.
5.
Use the Up and Down navigation keys to highlight an event to view.
6.
Press the VIEW key ( OK ) to display the
specifics of the highlighted event. The
following options are available:
• Press the Edit (left) soft key (
) to change
the event details. (See “Add a New Event” on
page 110 for more information.)
• Press the OK key ( OK ) to return to the Events
list.
). The
• Press the Options (right) soft key (
following options appear in the display:
– Monthly — Returns you to the Monthly
calendar display.
– Erase — Remove this event from the Calendar.
Use the Up/Down navigation keys to highlight an option. Press
the highlighted option.
OK
to invoke
Add a New Event
1.
From the Tools menu, press
for Calendar.
A calendar appears in the display with the current date highlighted. The
month and year appear at the top of the display.
Tools
110
Press the Add (left) soft key (
) to add an
event. The New Event screen appears in the
display.
• Use the Up and Down navigation keys to
highlight New Event options.
• Use the Left and Right navigation keys to select
option values.
• Use the keypad to enter option values.
3. Enter the Name of the new event using the
keypad.
2.
Press the Left soft key (
) to change the text input mode. (See
“Entering Text” on page 44 for more information.)
Note: The current mode of text entry is indicated in the lower left corner of the display.
4.
To set the Start Date, use the keypad to enter the start date for the event.
To set the Start Time:
• Use the keypad to enter the time for the event.
• Use the Left and Right navigation keys to select AM or PM.
6. Repeat Steps 4 and 5 for the End Date and End Time.
5.
Use the Left and Right navigation keys to select:
• Alert type (Tone, Vibrate, Light Only)
• Alert tone (the Alert Tone screen appears in the display. See “Using My
Ringtones Gallery” on page 104 and “Using My Sounds Gallery” on page 104
for more information.)
• Reminder (Off, Once, Every 2 Minutes, Every 15 Minutes)
• Alert time (15 Min. Before, 30 Min. Before, 1 Hour Before, 3 Hours Before,
5 Hours Before, 1 Day Before, On Time, 5 Min. Before, 10 Min. Before)
8. Press OK to store the event in your calendar. An alarm will notify you
prior to the event, if Reminder is set to a value other than Off.
7.
111
Memo Pad
Memo Pad
Create notes and store them in Memo Pad. Notes that
you create in Memo Pad can’t be prioritized or assigned
an alert. Return to Memo Pad anytime to review and edit
your notes.
Create a Memo
1.
From the Tools menu, press
Memo Pad.
for
2.
If you have any stored memos, they appear as
a list in the display. If this is your first time in Memo Pad, press the Add
(left) soft key (
) to add a memo.
3.
Enter memo text using the keypad.
Press the Left soft key (
) to change the text input mode. (See
“Entering Text” on page 44 for more information.)
Note: The current mode of text entry is indicated in the lower right corner of the display.
4.
Use the Up/Down navigation keys to highlight the entry mode that you
wish to use, or press OK to exit the pop-up menu.
Note: See “Entering Text” on page 44 for more information about entering text.
5.
When you’re finished entering details for the memo, press
memo is stored.
OK
. The
Review, Edit, and Erase Memos
1.
From the Tools menu, press
memos appears in the display.
for Memo Pad. Your list of stored
2.
Use the Up/Down navigation keys to browse memos.
Press the Options (right) soft key (
) and the following options appear
in the display:
• Edit— Change the currently highlighted memo.
• Erase — Erase the highlighted memo.
• Erase all — Erase all of the unlocked memos.
• Lock / Unlock — Prevents/allows erasure of the highlighted memo.
4. Press OK to VIEW a highlighted memo.
3.
Tools
112
5.
Press the Edit (left) soft key (
viewing.
) to change the text of the memo you are
Use the keypad to change the memo text. (See “Entering Text” on page 44
for more information.)
Press the Options (right) soft key (
) while viewing a memo, and the
following options appear in a pop-up menu:
• Erase — Erase the memo you are viewing.
• Add New Memo — Add a new memo to Memo Pad.
• Lock / Unlock — Prevents/allows erasure of the memo you are viewing.
7. Use the Up/Down navigation keys to highlight an option.
6.
8.
Press
OK
to perform the function for the highlighted option.
Alarm Clock
Your phone has three alarm clocks that can be set to go off once, or to recur daily at
a specific time. Once set, an alarm clock is easy to change or turn off completely.
Note: The alarm doesn’t function when the phone is turned off. If the time for an alarm that was set for
Once has elapsed while the phone is off, the alarm occurs at the specified time on the next day.
From the Tools menu, press
for Alarm Clock. The following
options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Use the Up/Down navigation keys to highlight
the alarm clock that you wish to set, then
press OK . The selected Set Alarm screen
appears in the display.
1.
Use the Up and Down navigation keys to
select Set Alarm options.
3.
Use the Left and Right navigation keys to set
the alarm Off or On.
To set the Time:
• Enter the time for the alarm using the keypad.
• Use the Left and Right navigation keys to select AM or PM.
5. Use the Left and Right navigation keys to select the Repeat at which you
wish the alarm to occur (Daily, Mon.-Fri., Weekends, or Once).
4.
113
Alarm Clock
6.
Use the navigation keys to select the Ringer type (Tone, Vibrate, Light
Only) and ringtone (from My Ringtones or My Sounds).
7.
Press OK when you’re finished entering the time and frequency for the
alarm. If the alarm is set to On, the alarm icon (
) appears in the top of
the display.
When an Alarm Sounds
An animated alarm clock appears in the display along with Snooze and Dismiss
options and an alert sounds when the specified time for the alarm arrives.
• To silence the alarm, use the Navigation key to highlight Snooze or Dismiss and
press .
• If the alarm was set as a Daily alarm, the alarm icon remains in the top of the
display.
• If the alarm was set as a Once only alarm, the alarm icon disappears from the top
of the display.
OK
Turn Off the Alarm
From the Tools menu, press
for Alarm Clock. The following
options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Use the Up/Down navigation keys to highlight the desired alarm, then
press the Options (right) soft key (
). The following options appear in
the display:
• On / Off
• Reset
• Reset All
3. Use the Up/Down navigation keys to highlight Reset, then press OK .
The selected alarm is turned off.
1.
Tools
114
World Time
World Time lets you view the time of day or night in any
of the 24 different time zones around the world.
Note: To use World Time, you need to subscribe to your Wireless
Provider’s digital service.
1.
From the Tools menu, press
for
World Time. A world map appears in the
display.
2.
Use the Left and Right navigation keys to
browse cities and their current times. The following cities are supported.
3.
115
EST/EDT : New York
EST/EDT : Montreal
EST/EDT : Boston
Caracas
Brasilia
Mid Atlantic
Cape Verde
London
Paris
Rome
Berlin
Athens
Helsinki
Jerusalem
Moscow
Baku
Abu Dhabi
Tashkent
Alma-ata
Bangkok
Jakarta
Hong Kong
Beijing
Seoul
Tokyo
Guam
Sydney
Okhotsk
Wellington
Samoa
Midway
HAST/HADT :
Honolulu
HAST/HADT :
Hawaii
AKST/AKDT : Alaska
PST/PDT : Seattle
PST/PDT :
San Francisco
PST/PDT :
Los Angeles
MST/MDT : Denver
MST/MDT : Arizona
CST/CDT : Dallas
CST/CDT : Chicago
CST/CDT : Houston
CST/CDT :
Mexico City
EST/EDT : Detroit
EST/EDT :
Washington D.C
Do one of the following:
• Press the OK key to set the selected time zone as the default time zone for
your phone.
Calculator
• Press the
key to return to the Tools menu.
Enable Daylight Savings Time (DST)
1.
While viewing the World Time map, press the Options (right) soft key
(
). DST Off / DST On pops-up in the display.
2.
Press the OK key to accept the highlighted setting. If the DST icon
(
) appears in the display, it indicates that Daylight Savings Time is
enabled.
Calculator
You can perform calculations, including addition, subtraction, multiplication and
division using your phone.
1.
From the Tools menu, press
appears in the display.
for Calculator. The Calculator
Enter the first number in your equation using
the keypad. (Numbers can be up to 9 digits
long, and can include a decimal point followed
by up to 2 more digits.)
• Press
to enter a decimal point.
• Press
to change the sign for a number
to a negative.
• Press the Operator (right) soft key (
) to add
parentheses [( )] to your equation or to enter a
Power exponent (^), such as, 3^2, which is the
equivalent of 32.
• Press the Clear (left) soft key (
) to clear current entries.
3. Use the navigation keys (as shown in the Calculator screen) to set the
type of calculation that you wish to perform. Your choices are as follows.
• [ + ] Addition
• [ x ] Multiplication
• [ - ] Subtraction
• [ ÷ ] Division
4. Use the keypad to enter the second number into your equation.
2.
5.
Press
OK
to perform the calculation and view the result.
Tools
116
Stop Watch
You can use this function to set a stop watch.
117
1.
From the Tools menu, press
for Stop
Watch. The Stop Watch screen appears in
the display.
2.
Press the OK key to start, stop, and resume
the stopwatch count.
3.
Press the Record (left) soft key (
) at the
start of each succeeding event/lap to record
the completion time for the previous event/lap. You can record up to eight
event/lap times.
4.
Press the Reset (right) soft key (
) to reset the stop watch and to erase
all stop watch (lap) times recorded.
Converter
Converter
The conversion menu provides the following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
To convert a currency, length, weight, volume, area, or temperature, do the
following:
1.
From the Tools menu, press
converters appears in the display:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
2.
Use the Up/Down navigation keys to highlight
the conversion feature you wish to use, then
press the OK key.
3.
Use the Navigation key to highlight and select
the units to be converted From and To.
4.
Enter the quantity you want converted in the
From field. The converted quantity appears in
the To field.
Note: To include a decimal point, press the
for Converter. The following list of
key.
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange rates as default
values. To review and/or change a default exchange rate to the current exchange
rate, do the following:
1.
From the Tools menu, press
Currency.
(for Converter), and
Tools
for
118
2.
Press the Rate (left) soft key (
the display.
). The EXCHANGE RATE list appears in
3.
Press the EDIT key ( OK ). The EDIT
EXCHANGE RATE list appears in the display.
4.
Use the Up and Down navigation keys to
highlight a currency whose exchange rate you
wish to change.
5.
Use the keypad keys to change the selected
exchange rate value.
6.
Press the OK key to save the changed
exchange rate. The EXCHANGE RATE list
appears in the display.
7.
To change any other exchange rates, repeat Steps 3 – 6.
8.
Press the
key to return to the Converter screen.
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to obscure currencies by
adding exchange rates for these currencies. To add a currency and its exchange rate
to the Currency Converter, do the following:
119
1.
From the Tools menu, press
Currency.
(for Converter), and
for
2.
Press the Rate (left) soft key (
). The
Exchange Rate list for the From currency
appears in the display.
3.
Press the Add (left) soft key (
). The Add
Exchange Rate screen appears in the display
with the Base field highlighted.
4.
Use the Left and Right navigation keys to
select the Base currency to be converted
from.
5.
Press the Down navigation key to highlight the
Currency field.
6.
Enter an identifier of up to 5 characters for the new currency using the
keypad. (See “Entering Text” on page 44 for more information.)
7.
Press the Down navigation key to highlight the Exchange Rate field.
8.
Enter a decimal exchange rate for the new currency using the keypad.
Tip Calculator
Note: Press the
key to enter the decimal point.
The Exchange Rate field only accepts up to five digits after the decimal point.
9.
Press the
OK
key to save the new exchange rate.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange Rate list. You can
erase a currency that you have added to the list by doing the following:
1.
From the Tools menu, press
Currency.
2.
Press the Rate (left) soft key (
currency appears in the display.
3.
Use the Up and Down navigation keys to highlight the user-added currency
exchange rate to be erased.
4.
Press the Erase (right) soft key (
erasure.
Note: The Erase right soft key (
erasing them.
5.
(for Converter), and
for
). The Exchange Rate list for the From
). You are prompted to confirm the
) is undefined for preloaded Exchange Rates. This prevents you from
Press the Yes (left) soft key (
press the No (right) soft key (
) to erase the selected exchange rate or
) to return to the Exchange Rate list.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Calculations are based on the total amount of the check, a selected gratuity
percentage, and the number of people paying.
1.
From the Tools menu, press
for Tip Calculator. The Tip Calculator
screen appears in the Bill field is highlighted.
Tools
120
121
2.
Use the keypad to enter the total amount of
the bill.
3.
If needed, press the Down navigation key to
highlight the Tip field.
4.
Use the keypad to enter a tip percentage.
5.
If needed, press the Down navigation key to
highlight the # Paying field.
6.
Use the keypad to enter the number of
persons paying.
7.
The amount of the Tip, the bill Total, and the amount Each person should
pay appear in the lower half of the screen.
Accessing Your Phone’s Settings
Section 13: Settings
Topics Covered
• Accessing Your Phone’s Settings
• Location Setting
• Display Settings
• Sound Settings
• Call Settings
• Phone Settings
• Memory Info
• Phone Info
This section explains how to configure your phone’s language, network
preferences, security options, and other settings.
Note: Although the procedures in this section are written for the phone keypad, you can also perform these
procedures using the QWERTY keypad.
Accessing Your Phone’s Settings
To launch the Settings menu:
䊳
In standby mode, press the MENU (left) soft key (
for Settings.
), then press
The Settings menu appears in the display.
Location Setting
You can set your phone to pass Global Positioning System (GPS) data to identify your
location to the network continually or only when you make an emergency (911) call.
Note: Check with your Wireless Carrier to determine if/when/where location-based services are available.
Settings
122
From the Settings menu, press
for Location. The following
Location options appear in the display:
• Location On — Your location data is continually sent wherever the feature is
available.
• 911 Only — Your location data is sent only when you dial 911.
2. Use the Up/Down navigation keys to highlight an option.
1.
3.
Press OK to select the function. The Settings menu appears in your
display.
4.
Press
to return to standby mode.
Display Settings
Display settings let you change your phone’s menu appearance, display brightness
and contrast, and display content to better meet your needs.
From the Settings menu, press
for Display Settings. The
following menus appear in the display:
• Wallpaper — Choose the images that appear as background in the Main
display on your phone while in standby mode.
• Clock Format — Choose whether the time and date appear in the Main and
Front displays on your phone in optional digital or analog (clock face) style or in
the default digital style.
• Theme — Choose the color set used to show menus and screens on your
phone’s display.
• Dialing Font — Lets you select the style and size of the font used to display
digits you dial.
• Banner — Lets you change or replace the text greeting that appears in the
display when your phone is in standby mode. Also lets you enable/disable an ERI
(Extended Roaming Indicator) banner.
• Backlight — Set backlight options for the Main Display, Keypad, and backlight
Brightness.
2. Use the Up/Down navigation keys to highlight a sub-menu.
1.
3.
Press the OK key to enter the highlighted sub-menu. The following
sections describe the Display sub-menus in greater detail.
Wallpaper
Wallpaper lets you choose images that appear in the background on your phone’s
Main display while in standby mode.
123
Display Settings
From the Settings menu, press
(for Display Settings), and
for Wallpaper. The following options appear:
• My Images — Lets you select an image that you’ve downloaded or a picture
you’ve taken with the camera.
• Preset Images — Lets you select an image that came preloaded with your
phone.
2. Use the Up/Down navigation keys to highlight the image type that you wish
to use and press the OK key. A list of images appears in the display.
1.
3.
Use the navigation keys to highlight the image that you wish to use and
press the OK key to save your selection.
Clock Format
Lets you choose whether the time and date appear in the Main display on your
phone in optional digital or analog (clock face) style or in the default digital style.
1.
From the Settings menu, press
for Clock Format.
(for Display Settings), and
The following clock format options appear in the display:
• Digital — Time, date, and day of the week are shown using an alternate, large
digital format.
• Analog — Time is shown using an analog clock face image.
• Off — Time, date, and day of the week are shown using the default, small
digital format.
2. Use the navigation keys to highlight the image that you wish to use and
press the OK key to save your selection.
Theme
Lets you select the colors used to show menus and screens in the Main display.
1.
From the Settings menu, press
(for Display Settings), and
for Theme. The following options appear in the display:
2.
Use the Left and Right navigation keys to show the desired color theme
(which appears in the preview screen), then pressed the OK key to save
the selected theme setting.
Settings
124
Dialing Font
Lets you select the style and color of your dialing font.
From the Settings menu, press
(for Display Settings), and
for Dialing Font. The following sub-menus appear in the display:
• Style — Choose the font used to show phone number digits when you enter
them to be dialed.
• Size — Choose the size of the digits.
2. Use the Up and Down navigation keys to highlight the desired dialing font
characteristic, then press the OK key.
• If you select Style, the following Style options appear in the display:
– Normal
– Quill Pen
– Sticky
– Color Dial
Use the Left and Right navigation keys to highlight the desired setting and press
the OK key to save the selected setting.
• If you select Size, the following Size options appear in the display:
– Enable Zoom-out
– Disable Zoom-out
Use the Up and Down navigation keys to highlight the desired setting and press
the OK key to save the selected setting.
1.
Banner
Create your own personalized greeting that appears in the display while your phone
is in standby mode.
From the Settings menu, press
(for Display Settings), and
for Banner. The following sub-menus appear in the display:
• Personal
• ERI Banner
2. Use the Up and Down navigation keys to highlight the desired banner, then
press the OK key.
• If you select Personal, the Banner screen appears in the display with the Enter
Text field highlighted.
– Enter a word or short phrase to appear in your phone’s display while in standby
mode (Up to 13 characters). See “Entering Text” on page 44 for more
information.
1.
Tip: Press and hold
125
to erase an existing banner, if necessary.
Sound Settings
Press the OK key to save your changes.
• If you select ERI Banner, the following options appear in the display:
– On
– Off
Use the Up and Down navigation keys to highlight the desired option, then press
the OK key.
Backlight
You can set the backlight for your display or keypad to remain on for a specified
period of time or remain on as long as the folder is open.
Note: Prolonged backlight use drains your battery faster.
1.
From the Settings menu, press
for Backlight.
(for Display Settings), and
The following sub-menus appear in the display:
• Main Display — Sets the time the internal display backlight remains on after a
period of inactivity. Optional settings are: 7 seconds, 15 seconds, 30 seconds,
Always On, and Always Off.
• Keypad — Sets the amount of time the keypad backlight remains on after a
period of inactivity. Optional settings are: 7 seconds, 15 seconds, 30 seconds,
Always On, and Always Off.
• Brightness — Use the Left and Right navigation keys to select between any of
5 optional settings.
2. Use the Up and Down navigation keys to highlight the desired sub-menu
and press the OK key.
3.
Use the navigation keys to change settings as desired in the selected submenu, and press the OK key to save your selection.
Sound Settings
Sound Settings let you customize your phone’s audio properties, such as ringers,
keypad tones, alerts, start up melody, and more.
Settings
126
Volume
Use the Volume sub-menu to set the default volume for call ringers, message alerts,
and alarms.
From the Settings menu, press
(for Sound Settings), and
for Volume. The following options appear in the display:
• Voice Calls — Lets you set your phone to be silent, play a sound, and/or vibrate
in response to incoming calls.
• Messages — Lets you set your phone to be silent, play a sound, and/or vibrate
in response to incoming messages.
• Alarms — Lets you set your phone to be silent, play a sound, and/or vibrate in
response to a preset alarm time being reached.
• Key Tone — Lets you adjust the volume level of the tones that the keypad
generates when you press the keys.
2. Use the Up and Down navigation keys to highlight the desired option, then
press the OK key.
1.
3.
Use the Navigation key or the Up and Down volume keys on the right side
of your phone to select the volume level (Ringer Off, Low, Low/Medium,
Medium, Medium/High, or High) or vibrate mode (Vibrate, Vibrate/High)
for the selected option.
4.
Press the
OK
key to save the option setting.
Ringer Type
You can assign ring tones and melodies for calls, alarms, and other alerts in the
Ringer Type sub-menu.
From the Settings menu, press
(for Sound Settings), and
for Ringer Type. The following ringer types appear in the display:
• Voice Calls
• Messages
– Text Message
– Picture Message
– Voicemail
• Roam Ringer
2. Use the Up/Down navigation keys to highlight a ringer type, then press the
OK key. The following ringtone options appears in the display:
• My Ringtones
• My Sounds
3. Use the Up and Down navigation keys to highlight the desired ringtone
gallery, then press the OK key.
1.
127
Call Settings
4.
Use the Up and Down volume keys to scroll through the ringer types and
melodies for the selected ringer type. Press the Play (left) soft key (
)
to play each tone or melody as you scroll through the list.
5.
When the desired ringer type plays, press the
selection.
OK
key to save your
Alerts
You can set your phone to sound an alert whenever you enter or leave your service
area, connect or disconnect a call, and other options.
From the Settings menu, press
(for Sound Settings), and
for Alerts. The following options appear in the display:
• Minute Beep — Sound an alert ten seconds before each elapsed minute of a
call.
• Roaming — Sound an alert when you leave your home service area while on a
call.
• Call Connect — Sound an alert when you connect/disconnect a call.
• Power On/Off — Play power on and power off melodies.
2. Use the Up/Down navigation keys to highlight a sub-menu, then press the
OK key. The following options appear in the display:
• On
• Off
3. Use the Up and Down navigation keys to highlight active (On) or inactive
(Off) for the selected alert.
1.
4.
Press the
OK
key to confirm your selection.
Call Settings
The Call Settings sub-menu lets you set call options such as Auto Retry, Data rates
for data calls, and more.
Call Answer
You can select a specific answer mode when you receive an incoming call. Your
phone can be preset to answer when you do any of the following:
From the Settings menu, press
(for Call Settings), and
for Call Answer. The following call answer options appear in the display:
• Any Key — Pressing any key except the
key or key answers a call.
• Send Key — Only pressing
answers a call.
2. Use the Navigation key to highlight an option.
1.
3.
Press the
OK
key to select the method for answering calls.
Settings
128
Auto Answer
Auto Answer enables your phone to automatically answer calls after a period of time
that you specify.
From the Settings menu, press
(for Call Settings), and
for Auto Answer. The following options appear in the display:
• Off
• After 1 Second
• After 3 Seconds
• After 5 Seconds
2. Use the Up/Down navigation keys to highlight the desired setting, then
press the OK key.
1.
Auto Retry
Auto Retry automatically re-dials a number if there is no answer or the dialed party is
busy. Depending upon your location, the number of times your phone redials a
number may vary.
From the Settings menu, press
(for Call Settings), and
for Auto Retry. The following options appear in the display:
• Off
• Every 10 Seconds
• Every 30 Seconds
• Every 60 Seconds
2. Use the Up/Down navigation keys to highlight the desired setting, then
press OK .
1.
TTY Mode
Your phone is fully Teletypewriter (TTY)/Telecommunication Device for the Deaf (TDD)
compatible. You connect TTY/TDD equipment to the headset connector on the top of
your phone, behind the folder hinge.
Note: TTY Mode must be enabled (TTY Full selected) before you can use your phone with TTY/TDD
equipment.
1.
129
From the Settings menu, press
(for Call Settings), and
for TTY Mode. A message pops-up warning of possible headset and nonTTY accessory performance impairment when in TTY mode and prompting
you to confirm that you want to enable/disable TTY Mode.
• Press the Yes (left) soft key (
) to confirm you want to change the TTY Mode
setting.
Call Settings
• Press the No (right) soft key (
) to keep the current TTY Mode setting.
2. The following options appear in the display:
• TTY Full — Enables TTY mode while letting you hear and speak with the other
party.
• TTY + Talk — Enables TTY mode while letting you speak with the other party.
• TTY + Hear — Enables TTY mode while letting you hear the other party.
• TTY Off — Disables TTY mode.
Note: The TTY Mode option has no effect on the phone’s earpiece, microphone, or speaker. When you
select TTY Full, all currently enabled sound functions remain enabled.
3.
Use the Up/Down navigation keys to highlight your selection and press the
)
OK key. You’re returned to the previous menu and the TTY icon (
appears in the top of the display.
Voice Privacy
Voice Privacy lets you choose what level of voice security (Standard or Enhanced)
your phone will use.
Tip: You can change your Voice Privacy setting during a call by using the In-Use Menu options. (See “InUse Menu” on page 29 for more information.)
From the Settings menu, press
(for Call Settings), and
for Voice Privacy. The following options appear in the display:
• Standard
• Enhanced
2. Use the Up/Down navigation keys to highlight the Voice Privacy option of
your choice, then press the OK key.
1.
Data Settings
Use the Data Settings sub-menu to set your phone to detect data connections
automatically.
From the Settings menu, press
(for Call Settings), and
for Data Settings. The following options appear in the display:
• Data Off — Your phone ignores data connections.
• Data For Next Call — Your phone accepts data connection for the next call.
• Data Until Powered Off — Your phone accepts data connections until you turn
off your phone.
2. Use the Up/Down navigation keys to highlight the desired data setting,
then press the OK key.
1.
Settings
130
DTMF Tones
Use this menu to set DTMF settings to Normal, or Long.
In standby mode, press
(for Call Settings), and
for DTMF
Tones. The following options appear in the display:
• Normal — Select for a normal tone
• Long — Select for an extended tone
2. Use the Up and Down navigation keys to highlight the DTMF Tones setting
of your choice, then press OK . Your setting is saved.
1.
Phone Settings
Airplane Mode
When set to On, Airplane Mode disables all radio functions of your phone. This
prevents you from making or receiving calls, but allows you to use other features
(such as the camera and the Tools) safely in sensitive environments, such as on
board an aircraft.
1.
From the Settings menu, press
(for Phone Settings), and
for Airplane Mode. The following options appear in the display:
• On — Disables the radio transmitter and receiver and the Bluetooth interface in
your phone.
Tip: If you need to make an emergency call with Airplane mode enabled, just dial the emergency number
and press
.
• Off — Enables the radio transmitter and receiver in your phone.
Note: Press
to return to the Phone Settings menu.
2.
Use the Up/Down navigation keys to highlight the desired option, then
press the OK key. You are prompted to confirm your setting change.
3.
Press the Yes (left) soft key (
) to change to the new setting. Press the
No (right) soft key (
) to discard the change and keep the original
setting.
4.
If you press Yes, you are returned to standby mode. If you press No, the
Airplane Mode screen remains in the display.
Language
The Language option changes the language of menus, sub-menus, and other userinterface features.
131
Phone Settings
1.
From the Settings menu, press
for Language.
(for Phone Settings), and
The following options appear in the display:
• English
• Español
2. Use the Up/Down navigation keys to highlight your language preference,
then press the OK key.
Security
Use the Security sub-menu to lock your phone, set up emergency numbers, enable
or disable voice privacy, set restrictions, and other security options.
Lock Phone
Locking the phone blocks all outgoing calls except those to 911 and to the three
user-programmed emergency numbers. You can lock the phone manually, or set the
phone to lock automatically when turned on. In Lock mode, you can answer calls,
but you must unlock the phone to place calls (except to emergency and secret
numbers).
Important!: If you change the NAM1 setting after setting the phone to lock upon power-up and did not
program a number into NAM2, you won’t be able to access your phone. You must call the
Service Center to unlock your phone.
1.
From the Settings menu, press
for Security.
(for Phone Settings), and
2.
Enter the four-digit lock code using the keypad.
The “Enter Code” prompt appears in the display.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3.
Press
for Lock Phone. The following options appear in the
display:
• Lock — The phone locks immediately and stays locked until you enter the lock
code.
• Unlock — The phone remains unlocked.
• On Power Up — The phone locks automatically the next time your phone is
powered on and stays locked until you enter the lock code.
Settings
132
4.
Use the Up/Down navigation keys to highlight the Lock Phone option of
your choice.
5.
Press
OK
to perform the function for the highlighted option.
Change Lock
The default lock code is generally the last four digits of your phone number. It is
advisable to change the default lock code to a secret code for security purposes.
1.
From the Settings menu, press
for Security.
(for Phone Settings), and
2.
Enter the four-digit lock code using the keypad.
The “Enter Code” prompt appears in the display.
Note: The default lock code is the last four digits of your mobile phone number.
3.
Press
for Change Lock.
The “New Lock Code” prompt appears in the display.
4.
Enter the New Lock Code. You’re prompted to re-enter the New Lock Code
for verification.
5.
Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.
Emergency #
You have the option of storing up to three emergency numbers to your phone. Each
number can be up to 32 digits in length. All emergency numbers can be dialed any
time, even when your phone is locked or restricted.
Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even
when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters, and user settings used to
complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for essential or
emergency calls.
133
Phone Settings
Remember to always turn your phone on and check for adequate signal strength
before placing a call.
Note: When you dial an emergency number, you phone locks itself to the emergency location that
answered the call and locks itself in 911-Only mode, blocking from dialing any number but an
emergency number.
Store Emergency Numbers
1.
From the Settings menu, press
for Security.
(for Phone Settings), and
2.
Enter the four-digit lock code using the keypad.
The “Enter Code” prompt appears in the display.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3.
Press
for Emergency #.
4.
Press
numbers.
,
5.
Enter the emergency number (up to 32 digits in length).
6.
Press
7.
Press Cancel (right) soft key (
previous menu.
OK
, or
to select one of the three emergency
to save the number that you entered.
) to discard your entry and return to the
Call Emergency Numbers in Lock Mode
1.
In standby mode, enter the emergency number via the keypad.
2.
Press
to place the call.
Reset Phone
Reset Phone returns all setup parameters (except for the Contacts entries) to their
factory default values.
Caution!: Before selecting Reset Phone, contact your Wireless Carrier. Invoking Reset Phone may erase
settings made by your Wireless Carrier from your phone, resulting in loss of service.
1.
From the Settings menu, press
for Security.
(for Phone Settings), and
The “Enter Code” prompt appears in the display.
Settings
134
2.
Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3.
Press
for Reset Phone. A prompt appears in the display to restore
default settings (except for Contacts).
4.
Press the Yes (left) soft key (
) to reset your phone to factory default
settings. Press the No (right) soft key (
) to keep the current settings.
Erase All Entry
Erase All Entry deletes all entries from the Contacts list.
1.
From the Settings menu, press
for Security.
(for Phone Settings), and
The “Enter Code” prompt appears in the display.
2.
Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3.
Press
for Erase All Entry.
The “Enter Code” prompt reappears in the display.
4.
Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears, and the “Erase all entries?”
prompt appears in the display.
5.
Press the Yes (left) soft key (
) to reset your Contacts list. Press the No
(right) soft key (
) to keep the current Contacts entries.
Restriction
Restriction lets you restrict the use of your phone for outgoing calls, incoming calls,
and calls placed by/to your Contacts.
1.
135
From the Settings menu, press
for Security.
(for Phone Settings), and
Phone Settings
The “Enter Code” prompt appears in the display.
2.
Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone number.
The “Enter Code” prompt disappears and the Security menu appears in
the display.
3.
Press
for Restriction.
4. Use the Up/Down navigation keys to highlight Outgoing or Incoming.
5. Press the OK key. The following options appear in the display:
• Allow All — No restriction on selected calls.
• Allow None — Restrict (block) all selected calls.
• Allow Contacts — Restrict selected calls from/to numbers not in your
Contacts list.
Note: The default restriction settings are all Off.
6.
Use the Up/Down navigation keys to highlight the Restriction you want,
then press the OK key.
NAM Selection
NAM Selection allows you to set your preferred system. Contact your wireless
carrier for more information.
1.
From the Settings menu, press
for NAM Selection.
(for Phone Settings), and
The following NAM options appear in the display:
• NAM 1 — Your service contract has one phone line.
• NAM 2 — Your service contract has two phone lines.
2. Use the Up/Down navigation keys and to highlight NAM 1 or NAM 2, the
press OK to save your selection.
The phone automatically restarts.
System Select
The System Select feature enables you to automatically or manually select the
network used when roaming outside of your home area.
1.
From the Settings menu, press
(for Phone Settings), and
for System Select. The following roaming options appear in the
display:
Settings
136
• MetroPCS only — Roaming is off. If your home system is not available then
your call will not be connected, and the no service icon (
) appears in the
display. In some service areas, an operator may come on-line and ask you how
you would prefer to pay for the call.
• Automatic — Roaming is on. It will always try your calls using the Preferred
Roaming List (PRL) loaded into your phone. If a preferred service is not found,
then this option will attempt to acquire any digital service.
2. Use the Up/Down navigation keys and to highlight the desired Roam
option, the press OK to save your selection.
The Phone Settings menu appears in the display.
Clock Set
Use the Clock Set option to set the current time and date.
Note: In digital service mode, the Clock Set feature is disabled. The network adjusts time and date
automatically.
From the Settings menu, press
(for Phone Settings), and
for Clock Set. The following options appear in the display:
• Set Time
• Set Date
2. Use the Up and Down navigation to highlight Set Time, then press the
OK key. The Set Time screen appears in the display.
1.
Enter the current time using your keypad:
• The hour and minute must be entered using two digits each. You must enter the
hour in 12-hour format.
• Use the Left and Right navigation keys to select am or pm.
4. Press OK to save the time. The following options appear in the display:
• Set Time
• Set Date
5. Use the Up and Down navigation to highlight Set Date, then press the
OK key. The Set Date screen appears in the display.
3.
Enter the current date using your keypad:
• The month and day must be entered using two digits each.
• The year must be entered with all four digits.
7. Press OK to save the date.
6.
137
Phone Settings
Quick Search
Quick Search is an easy way to locate contacts in your Address Book and Menu
items.
From the Settings menu, press
(for Phone Settings), and
for Quick Search. The following options appear in the display:
• On
• Off
2. Use the Up and Down navigation keys to highlight the desired option, then
press OK .
1.
Searching for a Contact
1.
In standby mode, press the first few numeric keys that correspond to the
letters of the contact’s name.
For example, to search for “Sally” you would enter
S
A
L
L
Y
2.
Press the Up navigation key. The contact name is highlighted.
3.
Press the
key to call the contact.
Searching for a Menu Item
1.
In standby mode, press the first few numeric keys that correspond to the
letters of the Menu item name.
For example, to search for “Inbox” you would enter
I
N
B
O
X
2.
Press the Down navigation key. The menu item is highlighted.
3.
Press the
OK
key to access the content of the menu item.
Settings
138
Auto Key Lock
Auto Key Lock lets you enable/disable your phone’s keypad lock. With Auto Key
Lock set to On and your phone in standby mode, your phone automatically locks the
phone keypad (but not the QWERTY keypad) and the side keys (Volume and Camera)
when the backlights go out due to Backlight time expiring. Locking the phone
keypad prevents accidental call dialing, launching of the camera, and activation of
other functions.
From the Settings menu, press
(for Phone Settings), and
for Auto Key Lock. The following options appear in the display:
• On — Phone keypad and side keys lock automatically when the display and
keypad backlights go out.
• Off — Phone keypad and side keys remains active.
2. Use the Up and Down navigation keys to highlight the desired option, then
press OK .
1.
Memory Info
Memory Info shows the amount of phone memory that is available and used, and
details the distribution of the used memory.
From the Settings menu, press
for Memory Info. The following
options appear in the display:
• Memory Usage — Shows Total phone memory, total memory Available, and
memory quantities used to store Photos, Ringtones, Sounds, and Applications.
• My Images — Lists the photos stored in the My Images folder. Lets you make
used memory available by erasing unwanted photos.
• My Ringtones — Lists the downloaded ringtones stored in the My Ringtones
folder. Lets you make used memory available by erasing unwanted ringtones.
• My Sounds — Lists the recorded sounds stored in the My Sounds folder. Lets
you make used memory available by erasing unwanted recorded sounds.
2. Use the Up and Down navigation keys to highlight the desired option, then
press OK .
1.
3.
139
To delete selected photos, downloaded ringtones, or recorded sounds,
press the Erase (right) soft key (
). The selected Erase screen appears
in the display. Do the following:
• Mark individual files by highlighting each file, then pressing the MARK key
( OK ); or mark all files by pressing the Mark All (right) soft key (
).
• Press the Done (left) soft key (
).
• You are prompted to confirm the erasure(s).
– To erase the selected file(s), press the Yes (left) soft key (
).
Phone Info
– To keep the selected file(s), press the No (right) soft key (
).
Phone Info
Phone Info lets you identify the hardware and software versions of your phone and
to identify the phone number assigned to your phone.
Phone Number
This option causes the Phone Number screen to appear in the display and show the
ten-digit number assigned to your phone by your Wireless Carrier.
1.
From the Settings menu, press
(for Phone Info), and
for
Phone Number. The phone number assigned by your Wireless Carrier
appears in the display.
2.
Press
OK
to return to the Phone Info menu.
Icon Glossary
This option causes the ICON GLOSSARY list to appear in the display and show the
icons that can appear in the display and the names of the icons.
1.
From the Settings menu, press
(for Phone Info), and
for
Icon Glossary. A list of the icons that can appear on the top line of the
display shows in the display.
2.
Press
OK
to return to the Phone Info menu.
Version
You can view the PRL (Preferred Roaming List), ERI (Extended Roaming Indicator),
software version, and hardware version on your phone. This feature is helpful if you
need to contact Customer Service.
1.
From the Settings menu, press
Version.
(for Phone Info), and
for
Hardware and software information for your phone appears in the display.
2.
Press the
OK
key to return to the Phone Info menu.
Settings
140
Section 14: Health and Safety Information
Topics Covered
• Health and Safety Information
• Samsung Mobile Products and Recycling
• UL Certified Travel Adapter
• Consumer Information on Wireless Phones
• Road Safety
• Responsible Listening
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government.
141
Health and Safety Information
These FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC
RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
• Head: 1.04 W/Kg.
• Body-worn: 1.4 W/Kg.
Health and Safety Information
142
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
Go to: http://www.samsung.com/us/consumer/type/
type.do?group=mobilephones&type=mobilephones for more information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
143
Consumer Information on Wireless Phones
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Health and Safety Information
144
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
145
Consumer Information on Wireless Phones
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
Health and Safety Information
146
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless
phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
147
Consumer Information on Wireless Phones
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption.
Health and Safety Information
148
In February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations (Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
149
Road Safety
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
• US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
Health and Safety Information
150
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies.
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
www.wow-com.com.
Important!: If you are using a handset other than a standard numeric keypad, please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The
risk of hearing loss increases as sound is played louder and for longer durations.
Prolonged exposure to loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced hearing
loss. This includes the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
151
Responsible Listening
Individual susceptibility to noise-induced hearing loss and potential hearing problem
varies. Additionally, the amount of sound produced by a portable audio device varies
depending on the nature of the sound, the device settings, and the headphones that
are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
You should follow some commonsense recommendations when using any portable
audio device:
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, you noise-cancelling headphones
to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the
music at lower volumes than when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time is required
before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing
in your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org
Health and Safety Information
152
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/health/hearing
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
153
Using Your Phone Near Other Electronic Devices
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld
wireless phone and an implantable medical device, such as a pacemaker or
implantable cardioverter defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their implantable
medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason to suspect that
interference is taking place.
• Should read and follow the directions from the manufacturer of your implantable
medical device. if you have any questions about using your wireless phone with
such a device, consult your health care provider.
For more information see, http://www.fcc.gov/oet/rfsafety/rf-faqs.html
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some hearing devices (hearing aids and
cochlear implants), users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of their mobile
phones, to assist hearing device users in finding phones that may be compatible
with their hearing devices. Not all phones have been rated. Phones that are rated
have the rating on their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing
device and hearing loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone successfully. Trying out the
phone with your hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to
generate less interference to hearing devices than phones that are not labeled. M4 is
the better/higher of the two ratings.
Health and Safety Information
154
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more
usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than
unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing
devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference.
Your hearing device manufacturer or hearing health professional may help you find
results for your hearing device. The more immune your hearing aid is, the less likely
you are to experience interference noise from mobile phones.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
155
Emergency Calls
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
Health and Safety Information
156
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone warranty
if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
•
•
•
•
•
157
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates, serious injury could
result.
Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Product Performance
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power Save feature is
automatically activated. If your phone is active, it periodically rechecks service
availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
Health and Safety Information
158
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
•
•
•
•
•
•
•
•
159
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in serious safety
hazards.
If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network
and the parameters set by the network operator.
Follow battery usage, storage and charging guidelines found in the user’s guide.
Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy a new battery.
If left unused, a fully charged battery will discharge itself over time.
Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source. Do not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier recommended products and
Battery Precautions
•
•
•
•
•
•
•
•
•
accessories. If unsure about whether a replacement battery or charger is
compatible, contact the manufacturer of the battery or charger.
Misuse or use of incompatible phones, batteries, and charging devices could
result in damage to the equipment and a possible risk of fire, explosion, leakage,
or other serious hazard.
Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip or pen) causes a direct connection between the + and terminals of the battery (metal strips on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
Do not permit a battery out of the phone to come in contact with metal objects,
such as coins, keys or jewelry.
Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
Health and Safety Information
160
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage
the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove
or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
161
Standard Limited Warranty
Section 15: Warranty Information
Topics Covered
• Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are
free from defects in material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada.
Warranty Information
162
This Limited Warranty covers batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
163
Standard Limited Warranty
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
Warranty Information
164
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods,
the data only appears to be removed on a superficial level, and it may be possible for
someone to retrieve and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this sort, it is
recommended that the device be returned to Samsung’s Customer Care Center for
an Extended File System (EFS) Clear which will eliminate all user memory and return
all settings to default settings. Please contact the Samsung Customer Care Center
for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center
in order to provide this service at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
165
Standard Limited Warranty
Samsung Telecommunications America, LLC
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad, dial the numbers listed
in brackets.
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
Warranty Information
166
Travel adapter 6
Brightness, pictures 98
Buying new apps 68
Index
Symbols
@metro
On-line Help 67
Settings 67
Numerics
2-sec pause 54
A
Accessing Your Phone’s Settings 122
Accessing Your Phone’s Tools 106
Adding a new Contacts entry
Dial Method 52
Adjust
Key Tone 127
ringer setting 20 27
Alarm clock
turn off the alarm 114
when an alarm sounds 114
Alerts 128
Apps
buying 68
disabled 68
expired 68
removing 68
restoring 68
Auto Answer 129
Auto Retry 129
,
B
Backlight 126
Banner 125
Battery 5
charging 6
Low battery indicator 7
removal 5
167
C
Calculator 116
Calendar
view an event 109
Call Answer 128
Call answer 28
Call Answer mode 18
Call block 28
Call Functions 22
Answering a Call 26
Making a Call 22
Call notification types 27
Call Settings
Auto Answer 129
Auto Retry 129
Call Answer 128
Data Settings 130
TTY Mode 129
Voice Privacy 130
Call timer 33
Call waiting 28
Caller ID 28
Calls
call timer 33
data counter 33
erase logs 31
incoming 30
missed 31
outgoing 30
store numbers 34
Calls menu 29
Camera
Options 99
Screen 97
Screen Icons 97
Self Timer 99
Shortcuts 98
Taking Pictures 96
Camera mode 21
Camera Screen 97
Canned Message Text
Editing and Entering 84
Change lock 133
Clear key 15
Contacts 49
add pauses 54
Adding a new Contacts
entry 52
edit name and numbers 53
erase all 135
opening 50
Save a number after a call 57
Contacts List
Memory 64
Create messages 70
D
Data Counter 33
Data Settings 130
Data, view counters 33
Delay pictures 99
Dialing Font 125
Disabled apps 68
Display 123
Display screen icons 17
Display Settings 124
Backlight 126
Banner 125
Dialing Font 125
Wallpaper 123
Draft folder 79
Draft messages 79
E
Edit contacts name and numbers 53
Emergency 133
Emergency #s in lock mode 134
Emergency numbers 133
End key 16
Entering Text 44
Entering Numbers 47
Entering Symbols 48
Using T9 Mode 46
Erase All Entry 135
Erase logs 31
Erase messages 83
Exit metroWeb 87
Expired apps 68
G
Gallery
Image 103
General message settings 83
Getting Started 4
Activating Your Phone 7
Understanding this User
Manual 7
Voicemail 8
Go back one menu 36
GPS Setting 122
H
Hardware version, viewing 140
Health and Safety Information 141
I
Icon Glossary 140
Icons
number type 52 58 59
Ignore calls 29
Inbox folder 76
Incoming calls 26
, ,
168
Incoming calls menu 30
Input mode 18
L
Language 131
Left soft key 15
Lock code, changing 133
Lock mode 18
Lock phone 132
M
Menu Navigation 36
Menu Outline 38
Message folder
draft box 79
inbox 76
outbox 78
voice 82
voice mail 82
Message Folders
Erase messages 83
Message settings, general 83
Messages and lock mode 78
Messages, creating 70
Messages, receive in call 71
Messaging 69
Types of Messages 70
metroWeb 86
How metroWeb Keys Work 88
Launching metroWeb 86
Using Links 87
Using metroWeb 87
Missed calls menu 31
Mobile Shop 66
Shopping and
downloading 66
Mode
call answer 18
camera 21
169
input 18
lock 18
silent 20
standby 19
talk 19
vibrate 20
Msg setting sub menu 83
Multimedia 95
N
Navigation key 16
Navigation key shortcuts 37
Notes and tips 4
Notes, description 4
Number type icons 52 58 59
, ,
O
OK key 15
Outbox folder 78
Outbox, reviewing messages 78
Outgoing 30
,
P
Pause dial 23 55
Pauses, adding 54
Phone Info
Icon Glossary 140
Phone Number 140
Phone Number 140
Phone Safety 153
Phone Settings
Language 131
Picture message settings 85
Picture messages
online viewing 75
receiving 75
Send in camera mode 71
Pictures
brightness 98
Quality 100
shutter sounds 102
zooming in 98
Q
Quality, Pictures 100
QWERTY Keypad 45
R
Receive messages in call 71
Receive pic. messages 75
Receive text messages 71
Removing apps 68
Reset your phone 134
Resolution, notes about 98
Responsible Listening 151
Restoring apps 68
Restriction 135
Return to last menu 36
Review calls 33
Reviewing outbox 78
Right soft key 15
Ringer Type 127
S
SAR 141
Save a number after a call 57
Security sub menu 132
Self timer 99
Send key 16
Setting
Call Answer 128
Settings 122
Auto Answer 129
Auto Retry 129
Backlight 126
Banner 125
Data Settings 130
Dialing Font 125
Language 131
Location Setting 122
Ringer Type 127
Theme 124
TTY Mode 129
Voice Privacy 130
Volume 127
Wallpaper 123
Settings menu
accessing 122
Settings, picture messages 85
Settings, text messages 84
Shortcut to menus 38
Shutter sounds 102
Silence ringer 28
Silent mode
entering 20
exiting 20
Software version, viewing 140
Sound Settings
Ringer Type 127
Volume 127
Standard Limited Warranty
162
Standby mode 19
Store emergency #s 134
Store numbers after a call 57
T
Take pictures
with flip open 96
Taking pictures 96
Talk mode 19
Text entry modes 70
Text message settings 84
Text messages, receiving 71
Text Modes
changing 45
Theme 124
170
Three-way calling 23
Timer, calls 33
Timer, camera 99
Tip, description 4
Tools 106
add new event 110
alarm clock 113
calculator 116
calendar 109
memo pad 112
world time 115
Tools Menu
accessing 106
TTY Mode 129
U
UL Certification 143
Understanding Your Contacts 49
Deleting a Contacts entry 64
Editing an existing Contacts
entry 53
Finding a Contacts entry 50
Understanding Your Phone 9
Closed View of Your Phone 10
Command Keys 15
Display Screen 16
Features of Your Phone 9
Open View of Your Phone 12
Using Abc Mode 47
V
Version 140
Vibrate mode 20
View an event, scheduler 109
Voice folder 82
Voice mail
checking 82
listening to 8
Voice Privacy 130
171
Voice Setting
About VoiceSignal 94
Choice Lists 91
Sensitivity 91
Sound 93
Voice Launch 94
Voice SVC 89
Volume 127
W
Wait 54
Wallpaper 123
Warranty Information 162
World time 115
Z
Zooming, pictures 98