Motherboard
P5RD1-V
Deluxe
E1818
First Edition V1
March 2005
Copyright © 2005 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form
or by any means, except documentation kept by the purchaser for backup purposes, without the
express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the
serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY
OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
ii
Contents
Notices ............................................................................................... vii
Safety information ............................................................................ viii
About this guide ................................................................................. ix
Typography .......................................................................................... x
P5RD1-V Deluxe specifications summary ........................................... xi
Chapter 1:
Product introduction
1.1
Welcome! .............................................................................. 1-1
1.2
Package contents ................................................................. 1-1
1.3
Special features .................................................................... 1-2
1.3.1
Product highlights ................................................... 1-2
1.3.2
ASUS Proactive feature .......................................... 1-4
1.3.3
Innovative ASUS features ....................................... 1-5
Chapter 2:
Hardware information
2.1
Before you proceed .............................................................. 2-1
2.2
Motherboard overview .......................................................... 2-2
2.3
2.4
2.5
2.2.1
Placement direction ................................................ 2-2
2.2.2
Screw holes ............................................................ 2-2
2.2.3
Motherboard layout ................................................ 2-3
2.2.4
Layout Contents ..................................................... 2-4
Central Processing Unit (CPU) .............................................. 2-6
2.3.1
Installing the CPU .................................................... 2-6
2.3.2
Installing the CPU heatsink and fan ........................ 2-9
2.3.3
Uninstalling the CPU heatsink and fan .................. 2-11
System memory ................................................................. 2-13
2.4.1
Overview ............................................................... 2-13
2.4.2
Memory Configurations ......................................... 2-13
2.4.3
Installing a DDR DIMM ........................................... 2-17
2.4.4
Removing a DDR DIMM .......................................... 2-17
Expansion slots ................................................................... 2-18
2.5.1
Installing an expansion card .................................. 2-18
2.5.2
Configuring an expansion card .............................. 2-18
2.5.3
Interrupt assignments .......................................... 2-19
2.5.4
PCI slots ................................................................ 2-20
2.5.5
PCI Express x16 slot ............................................. 2-20
2.5.6
PCI Express x1 slot ............................................... 2-20
iii
Contents
2.6
Jumpers .............................................................................. 2-21
2.7
Connectors ......................................................................... 2-24
2.7.1
Rear panel connectors .......................................... 2-24
2.7.2
Internal connectors ............................................... 2-26
Chapter 3:
3.1
Starting up for the first time ................................................ 3-1
3.2
Powering off the computer .................................................. 3-2
3.2.1
Using the OS shut down function ........................... 3-2
3.2.2
Using the dual function power switch .................... 3-2
Chapter 4:
4.1
4.2
4.3
iv
Powering up
BIOS setup
Managing and updating your BIOS ........................................ 4-1
4.1.1
Creating a bootable floppy disk .............................. 4-1
4.1.2
AFUDOS utility ........................................................ 4-2
4.1.3
ASUS EZ Flash utility .............................................. 4-5
4.1.4
ASUS CrashFree BIOS 2 utility ................................ 4-6
4.1.5
ASUS Update utility ................................................ 4-8
BIOS setup program ........................................................... 4-11
4.2.1
BIOS menu screen ................................................. 4-12
4.2.2
Menu bar ............................................................... 4-12
4.2.3
Navigation keys .................................................... 4-12
4.2.4
Menu items ........................................................... 4-13
4.2.5
Sub-menu items ................................................... 4-13
4.2.6
Configuration fields .............................................. 4-13
4.2.7
Pop-up window ..................................................... 4-13
4.2.8
Scroll bar .............................................................. 4-13
4.2.9
General help .......................................................... 4-13
Main menu .......................................................................... 4-14
4.3.1
System Time ......................................................... 4-14
4.3.2
System Date ......................................................... 4-14
4.3.3
Legacy Diskette A ................................................ 4-14
4.3.4
Primary and Secondary IDE Master/Slave ............. 4-15
4.3.5
System Information .............................................. 4-17
Contents
4.4
4.5
4.6
4.7
Advanced menu .................................................................. 4-18
4.4.1
USB Configuration ................................................. 4-18
4.4.2
JumperFree Configuration .................................... 4-20
4.4.3
LAN Cable Status ................................................. 4-23
4.4.4
CPU Configuration ................................................. 4-24
4.4.5
Chipset ................................................................. 4-26
4.4.6
Onboard Devices Configuration ............................ 4-29
4.4.7
PCI PnP ................................................................. 4-31
Power menu ........................................................................ 4-32
4.5.1
Suspend Mode ...................................................... 4-32
4.5.2
Repost Video on S3 Resume ................................ 4-32
4.5.3
ACPI 2.0 Support .................................................. 4-32
4.5.4
ACPI APIC Support ................................................ 4-32
4.5.5
APM Configuration ................................................ 4-33
4.5.6
Hardware Monitor ................................................. 4-35
Boot menu .......................................................................... 4-37
4.6.1
Boot Device Priority .............................................. 4-37
4.6.2
Boot Settings Configuration ................................. 4-38
4.6.3
Security ................................................................ 4-39
Exit menu ........................................................................... 4-41
Chapter 5:
Software support
5.1
Installing an operating system ............................................. 5-1
5.2
Support CD information ........................................................ 5-1
5.3
5.2.1
Running the support CD ......................................... 5-1
5.2.2
Drivers menu .......................................................... 5-2
5.2.3
Utilities menu .......................................................... 5-3
5.2.4
ASUS Contact information ...................................... 5-5
5.2.5
Other information ................................................... 5-5
Software information ........................................................... 5-7
5.3.1
ASUS MyLogo2™ .................................................... 5-7
5.3.2
AI NET2 .................................................................. 5-9
5.3.3
Audio configurations ............................................ 5-10
5.5
Uninstalling the TV tuner driver ......................................... 5-16
5.4
Installing the TV tuner driver ............................................. 5-16
v
Contents
5.5
5.6
5.7
ASUS Home Theater ........................................................... 5-17
5.5.1
Installing ASUS Home Theater .............................. 5-17
5.5.2
Launching ASUS Home Theater ............................ 5-20
5.5.3
Using ASUS Home Theater ................................... 5-21
5.5.4
Entertainment modes ........................................... 5-23
5.5.5
Setup .................................................................... 5-33
RAID configurations ............................................................ 5-35
5.6.1
Installing hard disks .............................................. 5-36
5.6.2
ULI® RAID configurations ...................................... 5-37
Creating a RAID driver disk ................................................. 5-42
Appendix:
A.1
Enhanced Intel SpeedStep® Technology (EIST) .................... 5-1
A.1.1
System requirements ............................................. 5-1
A.1.2
Using the EIST ........................................................ 5-1
®
Hyper-Threading Technology ..................................... 5-3
A.2
Intel
A.3
Remote controller specifications .......................................... 5-4
A.4
Using the remote controller ................................................. 5-4
A.5
Remote controller layout ...................................................... 5-5
A.6
Remote controller functions ................................................. 5-5
A.7
vi
Reference information
A.6.1
System buttons ...................................................... 5-5
A.6.2
Key table ................................................................ 5-6
International TV systems and standards .............................. 5-7
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Changes or
modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate
this equipment.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian
ICES-003.
vii
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from
the electrical outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that
the power cables for the devices are unplugged before the signal cables
are connected. If possible, disconnect all power cables from the existing
system before you add a device.
• Before connecting or removing signal cables from the motherboard,
ensure that all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
• Make sure that your power supply is set to the correct voltage in your
area. If you are not sure about the voltage of the electrical outlet you
are using, contact your local power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a
qualified service technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully read
all the manuals that came with the package.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the
product in any area where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualified
service technician or your retailer.
viii
About this guide
This user guide contains the information you need when installing and
configuring the motherboard.
How this guide is organized
This manual contains the following parts:
•
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new
technology it supports.
•
Chapter 2: Hardware information
This chapter lists the hardware setup procedures that you have to
perform when installing system components. It includes description of
the switches, jumpers, and connectors on the motherboard.
•
Chapter 3: Powering up
This chapter describes the power up sequence, the vocal POST
messages, and ways of shutting down the system.
•
Chapter 4: BIOS setup
This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are also
provided.
•
Chapter 5: Software support
This chapter describes the contents of the support CD that comes
with the motherboard package.
•
Appendix: Reference information
The Appendix describes the CPU features and technologies that the
motherboard supports. The Appendix also includes information on the
optional remote controller, the key table, and international TV
systems and standards.
Where to find more information
Refer to the following sources for additional information and for product
and software updates.
1.
ASUS websites
The ASUS website provides updated information on ASUS hardware
and software products. Refer to the ASUS contact information.
2.
Optional documentation
Your product package may include optional documentation, such as
warranty flyers, that may have been added by your dealer. These
documents are not part of the standard package.
ix
Conventions used in this guide
To make sure that you perform certain tasks properly, take note of the
following symbols used throughout this manual.
D A N G E R / W A R N I N G : Information to prevent injury to yourself
when trying to complete a task.
C A U T I O N : Information to prevent damage to the components
when trying to complete a task.
I M P O R T A N T : Instructions that you MUST follow to complete a
task.
N O T E : Tips and additional information to help you complete a
task.
Typography
Bold text
Indicates a menu or an item to select.
Italics
Used to emphasize a word or a phrase.
<Key>
Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1+Key2+Key3>
If you must press two or more keys simultaneously, the
key names are linked with a plus sign (+).
Example: <Ctrl+Alt+D>
Command
Means that you must type the command exactly as shown,
then supply the required item or value enclosed in
brackets.
Example: At the DOS prompt, type the command line:
afudos /i[filename]
afudos /iP5RD1VD.ROM
x
P5RD1-V Deluxe specifications summary
CPU
LGA775 socket for Intel® Pentium® 4/Celeron processor
Compatible with Intel® PCG 04A and O4B processors
Supports Intel® FMB 1.5 specification
Supports Intel® Hyper-Threading Technology
Supports Enhanced Intel SpeedStep® Technology (EIST)
Chipset
Northbridge: ATI Radeon® XPRESS 200
Southbridge: ULI M1573
Front Side Bus
800/533 MHz
Memory
Dual-channel memory architecture
4 x 184-pin DIMM sockets support unbufferred non-ECC
400/333/266 MHz DDR memory modules
Expansion slots
1 x PCI Express™ x16 slot for discrete graphics card
3 x PCI Express™ x1 slots
3 x PCI slots
Storage
- 2 x IDE connectors for up to four Ultra DMA
133/100/66/33 hard disks
- 4 x Serial ATA connectors support four Serial ATA
hard disks with RAID 0, RAID 1, RAID 0+1, and JBOD
configuration*
Graphics
Integrated ATI Radeon® X300 GPU
TV Tuner
Philips Silicon tuner supports Cable TV, S-Video In, RCA
Video In, and L/R Channel Audio In functions in NTSC/
PAL/SECAM standards
High Definition
Audio
Realtek® ALC861 7.1-channel CODEC with Jack-Sensing
and Enumeration
LAN
Marvell® Yukon™ 88E8001 Gigabit LAN controller
Supports Marvell® Virtual Cable Tester Technology
USB
Supports up to 8 USB 2.0 ports
IEEE 1394
T1 1394a controller supports:
- 2 x IEEE 1394a ports
BIOS features
4 Mb LPC Flash ROM, AMI BIOS, Green, PnP, DMI2.0,
WfM2.0, SMBIOS 2.3
ASUS AI Proactive
Feature
ASUS AI Net 2 network diagnosis utility
(continued on the next page)
xi
P5RD1-V Deluxe specifications summary
Special features
ASUS Q-Fan 2
ASUS CrashFree BIOS 2
ASUS MyLogo™ 2
ASUS C.P.R.
ASUS EZ Flash
Overclocking
features
ASUS AI Overclocking
ASUS AI Booster
Adjustable CPU, memory, and PCI Express voltages
Stepless Frequency Selection (SFS) from 100 MHz up
to 400 MHz at 1 MHz increment
Adjustable CPU multiple/FSB frequencies
Fixed PCI/PCI Express frequencies
Rear panel
1 x PS/2 mouse port
1 x PS/2 keyboard port
1 x Parallel port
1 x LAN (RJ-45) port
1 X IEEE 1394a port
4 x USB 2.0 ports
1 x VGA port
1 x TV in port
8-Channel audio ports
Internal
connectors
1 x Floppy disk drive connector
2 x IDE connectors
4 x Serial ATA connectors
1 x CPU fan connector
1 x Chassis fan connector
1 x Power fan connector
1 x Serial port connector
2 x USB 2.0 connectors for four additional USB 2.0 ports
1 x 24-pin ATX power connector
1 x 4-pin ATX 12 V power connector
1 x IEEE 1394a connector
1 x GAME/MIDI connector
1 x MIDI connector
1 x Front panel audio connector
1 x S/PDIF out connector
1 x Capture in connector
1 x TV out connector
1 x System panel connector
(continued on the next page)
xii
P5RD1-V Deluxe specifications summary
Support CD
contents
Drivers
ASUS PC Probe
ASUS Update
ASUS AI Booster
Anti-virus utility
InterVideo® WinDVD® Suite
InterVideo® Home Theater®
Form factor
ATX form factor: 12 in x 9.6 in (30.5 cm x 24.4 cm)
Specifications are subject to change without notice.
*Due to chipset limitation, you cannot configure a RAID 0/JBOD set
across more than two hard disk drives.
xiii
xiv
This chapter describes the
motherboard features and the new
technologies it supports.
1
Product
introduction
Chapter summary
1
1.1
Welcome! .............................................................................. 1-1
1.2
Package contents ................................................................. 1-1
1.3
Special features .................................................................... 1-2
ASUS P5RD1-V Deluxe
1.1
Welcome!
T h a n k y o u f o r b u y i n g a n A S U S® P 5 R D 1 - V D e l u x e m o t h e r b o a r d !
The motherboard delivers a host of new features and latest technologies,
making it another standout in the long line of ASUS quality motherboards!
Before you start installing the motherboard, and hardware devices on it,
check the items in your package with the list below.
1.2
Package contents
Check your motherboard package for the following items.
Motherboard
ASUS P5RD1-V Deluxe motherboard
I/O modules
1 x TV-out/capture-in module
1 x Serial port module
1 x IEEE 1394a (1 port) module
1 x USB 2.0 (2 ports) and Game (1 port) module
Cables
1 x 4-in-1 Floppy/IDE signal cable
2 x Serial ATA signal cables
1 x Serial ATA power cable (dual-plug)
Accessories
I/O shield
NTSC-to-PAL adaptor
Application CDs
ASUS motherboard support CD
InterVideo® WinDVD® Suite
InterVideo® Home Theater®
Documentation
User guide
If any of the above items is damaged or missing, contact your retailer.
ASUS P5RD1-V Deluxe
1-1
1.3
Special features
1.3.1
Product highlights
Latest processor technology
The motherboard comes with a 775-pin surface mount Land Grid Array
(LGA) socket designed for the Intel® Pentium® 4 processor in the 775-land
package. The motherboard supports the Intel® Pentium® 4 processor with
800/533 MHz Front Side Bus (FSB). The motherboard also supports the
Intel® Hyper-Threading technology and is fully compatible with Intel® 04B
and 04A processors. See page 2-6 for details.
ATI Radeon® XPRESS 200/ULI M1573 chipset
The ATI Radeon® XPRESS 200 Northbridge and the ULI M1573 Southbridge
provide the vital interfaces for the motherboard. The ATI Radeon® XPRESS
200 Northbridge integrates the Radeon® X300 GPU, an integrated graphics
processing unit (GPU) for enhanced 3D, 2D, and video capabilities. The
Northbridge also provides the interface for a processor in the 775-land
package with 533/800 MHz front side bus (FSB), dual channel DDR
memory, three PCI Express x1 slots, and a PCI Express x16 slot for discrete
graphics card.
The ULI M1573 Southbridge represents the sixth generation I/O controller
hub that provides the interface for PCI Express and 8-channel high
definition audio.
Enhanced Intel SpeedStep® Technology (EIST)
The Enhanced Intel SpeedStep® Technology (EIST) intelligently manages the
CPU resources by automatically adjusting the CPU voltage and core frequency
depending on the CPU loading and system speed or power requirement.
See page 4-25 and the Appendix for details.
PCI Express™ interface
The motherboard fully supports PCI Express, the latest I/O interconnect
technology that speeds up the PCI bus. PCI Express features point-to-point
serial interconnections between devices and allows higher clockspeeds by
carrying data in packets. This high speed interface is software compatible
with existing PCI specifications. See page 2-20 for details.
Onboard TV In port
The motherboard comes with a TV in port that allows you to watch and
record live TV on your desktop computer. See 2-25 for details. Refer to
page 5-16 for instructions on installing and uninstalling the required drivers.
1-2
Chapter 1: Product introduction
8-channel high definition audio
Onboard is the Realtek® ALC861 7.1-channel audio CODEC. This CODEC is
fully-compliant with Intel® High Definition Audio standard (192 KHz, 24-bit
audio). With the CODEC, 8-channel audio ports, and S/PDIF interfaces, you
can connect your computer to home theater decoders to produce
crystal-clear digital audio. See page 5-10 for details.
Serial ATA technology
The motherboard supports the Serial ATA technology through the Serial ATA
interfaces and the ULI M1573 Southbridge. The SATA specification allows
for thinner, more flexible cables with lower pin count, reduced voltage
requirement, and up to 150 MB/s data transfer rate. See page 2-28 for
details.
SATA RAID solution
Onboard RAID controllers provide the motherboard with RAID functionality.
The ULI M1573 Southbridge allows RAID 0, RAID 1, RAID 0+1, and JBOD
configuration. See page 5-35 for details.
Gigabit LAN
The motherboard comes with the Marvell® Yukon™ 88E8001 Gigabit LAN
controller to meet your growing networking needs. See page 2-24 for
details.
IEEE 1394a support
The IEEE 1394a interface provides high-speed and flexible PC connectivity
to a wide range of peripherals and devices compliant to IEEE 1394a
standards. The IEEE 1394a interface allows up to 400 Mbps transfer rates
through simple, low-cost, high-bandwidth asynchronous (real-time) data
interfacing between computers, peripherals, and consumer electronic
devices such as camcorders, VCRs, printers,TVs, and digital cameras. See
pages 2-24 and 2-33 for details.
ASUS P5RD1-V Deluxe
1-3
1.3.2
ASUS Proactive features
AI NOS™ (Non-Delay Overclocking System)
ASUS Non-delay Overclocking System™ (NOS) is a technology that
auto-detects the CPU loading and dynamically overclocks the CPU speed
only when needed. See pages 4-20 and 4-22 for details.
AI NET2
The AI NET2 is a BIOS-based diagnostic tool that detects and reports
Ethernet cable faults and shorts. With this utility, you can easily monitor
the condition of the Ethernet cable(s) connected to the LAN (RJ-45)
port(s). During the bootup process, AI NET2 immediately diagnoses the
LAN cable(s) and reports shorts and faults up to 100 meters at 1 meter
accuracy. See page 5-9 for details.
1-4
Chapter 1: Product introduction
1.3.3
Innovative ASUS features
ASUS Q-Fan 2 technology
The ASUS Q-Fan 2 technology smartly adjusts the CPU fan speed according
to the system loading to ensure quiet, cool, and efficient operation. See
page 4-35 for details.
ASUS CrashFree BIOS 2
This feature allows you to restore the original BIOS data from the support CD
in case when the BIOS codes and data are corrupted. This protection
eliminates the need to buy a replacement ROM chip. See page 4-6 for
details.
ASUS MyLogo™ 2
This feature allows you to personalize and add style to your system with
customizable boot logos. See page 5-7 for details.
C.P.R. (CPU Parameter Recall)
The C.P.R. feature of the motherboard BIOS allows automatic re-setting to
the BIOS default settings in case the system hangs due to overclocking.
When the system hangs due to overclocking, C.P.R. eliminates the need to
open the system chassis and clear the RTC data. Simply shut down and
reboot the system, and the BIOS automatically restores the CPU default
setting for each parameter.
ASUS EZ Flash BIOS
With the ASUS EZ Flash, you can easily update the system BIOS even
before loading the operating system. No need to use a DOS-based utility or
boot from a floppy disk. See page 4-5 for details.
ASUS P5RD1-V Deluxe
1-5
1-6
Chapter 1: Product introduction
This chapter lists the hardware setup
procedures that you have to perform
when installing system components.
It includes description of the jumpers
and connectors on the motherboard.
2
Hardware
information
Chapter summary
2
2.1
Before you proceed .............................................................. 2-1
2.2
Motherboard overview .......................................................... 2-2
2.3
Central Processing Unit (CPU) .............................................. 2-6
2.4
System memory ................................................................. 2-13
2.5
Expansion slots ................................................................... 2-18
2.6
Jumpers .............................................................................. 2-21
2.7
Connectors ......................................................................... 2-24
ASUS P5RD1-V Deluxe
2.1
Before you proceed
Take note of the following precautions before you install motherboard
components or change any motherboard settings.
•
Unplug the power cord from the wall socket before touching any
component.
•
Use a grounded wrist strap or touch a safely grounded object or to
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity
•
Hold components by the edges to avoid touching the ICs on them.
•
Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
•
Before you install or remove any component, ensure
that the ATX power supply is switched off or the
p o w e r c o r d i s d e t a c h e d f r o m t h e p o w e r s u p p l y . Failure
to do so may cause severe damage to the motherboard, peripherals,
and/or components.
Onboard LED
The motherboard comes with a standby power LED that lights up to
indicate that the system is ON, in sleep mode, or in soft-off mode.
This is a reminder that you should shut down the system and unplug
the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard
LED.
SB_PWR
P5RD1-V
®
ON
Standby
Power
OFF
Powered
Off
P5RD1-V DELUXE Onboard LED
ASUS P5RD1-V Deluxe
2-1
2.2
Motherboard overview
Before you install the motherboard, study the configuration of your chassis
to ensure that the motherboard fits into it. Refer to the chassis
documentation before installing the motherboard.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and damage
motherboard components.
2.2.1
Placement direction
When installing the motherboard, make sure that you place it into the
chassis in the correct orientation. The edge with external ports goes to the
rear part of the chassis as indicated in the image below.
2.2.2
Screw holes
Place nine (9) screws into the holes indicated by circles to secure the
motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
Place this side towards
the rear of the chassis
P5RD1-V
®
2-2
Chapter 2: Hardware information
2.2.3
Motherboard layout
FANSEL
PARALLEL PORT
ATX12V
CPU_FAN
CHA_FAN1
EATXPWR
PRI_IDE
ATI RADEON
XPRESS
200
Top:Line In
Center:Line Out
Below:Mic In
30.5cm (12.0in)
Top:Rear Speaker Out
Center:
Side Speaker Out
Below:
Center/Subwoofer
DDR DIMM_B2 (64 bit,184-pin module)
LAN_USB34
DDR DIMM_A2(64 bit,184-pin module)
F_USB12
USBPW12
USBPW34
VGA
DDR DIMM_B1 (64 bit,184-pin module)
LGA775
DDR DIMM_A1 (64 bit,184-pin module)
KB1
MS1
24.5cm (9.6in)
TV_OUT
TV_IN
PCIEX1_1
P5RD1-V
PWR_FAN
PCIEX16
SATA1
CLRTC
SAA7131E
PCI1
Super
I/O
PCI2
CHASSIS
TSB43AB22A
4M
BIOS
LPC
CAP_IN
SB_PWR
USBPW56
USBPW78
PCI3
SPDIF_OUT
ALC861
AAFP
IE1394_1
SEC_IDE
Marvell
88E8001
PCIEX1_3
FLOPPY
SATA3
ULI
M1573
PCIEX1_2
SATA4
CR2032 3V
Lithium Cell
CMOS Power
®
SATA2
Philips
TDA8275
USB78
USB56
COM1
GAME
PANEL
CD
ASUS P5RD1-V Deluxe
2-3
2.2.4
2-4
Layout Contents
Slots
Page
1. DDR DIMM slots
2-13
2. PCI slots
2-20
3. PCI Express slots
2-20
Jumpers
Page
1. Clear RTC RAM (3-pin CLRTC)
2-21
2. USB Device wake-up (3-pin USBPW12, USBPW34, USBPW56, USBPW78)
2-22
3. CPU Fan type selector (3-pin FANSEL)
2-23
Rear panel connectors
Page
1. Parallel port
2-24
2. IEEE 1394a port
2-24
3. LAN (RJ-45) port
2-24
4. Rear Speaker Out port
2-24
5. Side Speaker Out port
2-24
6. Line In port
2-24
7. Line Out port
2-24
8. TV In port
2-25
9. Microphone port
2-25
10. Center/Subwoofer port
2-25
11. USB 2.0 ports 3 and 4
2-25
12. USB 2.0 ports 1 and 2
2-25
13. Video Graphics Adapter (VGA) port
2-25
14. PS/2 keyboard port
2-25
15. PS/2 mouse port
2-25
Chapter 2: Hardware information
Internal connectors
Page
1. Floppy disk drive connector (34-1 pin FLOPPY)
2-26
2. IDE connectors (40-1 pin PRI_IDE, 40-1 pin SEC IDE)
2-27
3. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
2-28
4. CPU fan connector (4-pin CPU_FAN)
2-29
5. Chassis fan connector (3-pin CHA_FAN1)
2-29
6. Power fan connector (3-pin PWR_FAN)
2-29
7. Serial port connector (10-1 pin COM1)
2-30
8. USB connectors (10-1 USB56, USB78)
2-30
9. ATX power connector (24-pin EATXPWR)
2-31
10. ATX 12V power connector (4-pin ATX12V)
2-31
11. Optical drive audio connector (4-pin CD)
2-32
12. GAME/MIDI connector (16-1 pin GAME)
2-32
13. Chassis intrusion connector (4-1 pin CHASSIS)
2-33
14. IEEE 1394a connector (10-1 pin IE1394_1)
2-33
15. Front panel audio connector (10-1 pin AAFP)
2-34
16. Digital audio connector (4-1 pin SPDIF_OUT)
2-34
17. TV capture in connector (16-1 pin CAP_IN)
2-35
18. TV out connector (6-1 pin TV_OUT)
2-35
19. System panel connectors (20 pin PANEL)
- System Power LED (Green 3-pin PLED)
- Hard Disk activity (Red 2-pin IDE_LED)
- System warning speaker (Orange 4-pin SPEAKER)
- Power/Soft-off button(Yellow 2-pin PWRSW)
- Reset switch (Blue 2-pin RESET)
2-36
ASUS P5RD1-V Deluxe
2-5
2.3
Central Processing Unit (CPU)
The motherboard comes with a surface mount LGA775 socket designed for
the Intel® Pentium® 4 processor in the 775-land package.
2.3.1
•
Your boxed Intel® Pentium® 4 LGA775 processor package should
come with installation instructions for the CPU, heatsink, and the
retention mechanism. If the instructions in this section do not match
the CPU documentation, follow the latter.
•
Upon purchase of the motherboard, make sure that the PnP cap is
on the socket and the socket contacts are not bent. Contact your
retailer immediately if the PnP cap is missing, or if you see any
damage to the PnP cap/socket contacts/motherboard components.
ASUS will shoulder the cost of repair only if the damage is shipment/
transit-related.
•
Keep the cap after installing the motherboard. ASUS will process
Return Merchandise Authorization (RMA) requests only if the
motherboard comes with the cap on the LGA775 socket.
•
The product warranty does not cover damage to the socket
contacts resulting from incorrect CPU installation/removal, or
misplacement/loss/incorrect removal of the PnP cap.
Installing the CPU
To install a CPU:
1.
Locate the CPU socket on the motherboard.
P5RD1-V
®
P5RD1-V DELUXE CPU Socket 775
Before installing the CPU, make sure that the socket box is facing
towards you and the load lever is on your left.
2-6
Chapter 2: Hardware information
2.
Press the load lever with your thumb (A), then move it to the left (B)
until it is released from the retention tab.
Retention tab
A
PnP cap
Load lever
B
This side of the
socket box should
face you.
To prevent damage to the socket pins, do not remove the PnP cap
unless you are installing a CPU.
3.
Lift the load lever in the
direction of the arrow to a 135º
angle.
4.
Lift the load plate with your
thumb and forefinger to a
100º angle (A), then push
the PnP cap from the load
plate window to remove (B).
B
A
Load plate
5.
Position the CPU over
the socket, making
sure that the gold
triangle is on the
bottom-left corner of
the socket. The
socket alignment key
should fit into the
CPU notch.
ASUS P5RD1-V Deluxe
Alignment key
Gold triangle mark
2-7
The CPU fits in only one correct orientation. DO NOT force the CPU into
the socket to prevent bending the connectors on the socket and
damaging the CPU!
6.
Close the load plate (A), then
push the load lever (B) until
it snaps into the retention
tab.
A
B
The motherboard supports Intel® Pentium® 4 LGA775 processors with
the Enhanced Intel SpeedStep® Technology (EIST) and Hyper-Threading
Technology. Refer to the Appendix for more information on these CPU
features.
2-8
Chapter 2: Hardware information
2.3.2
Installing the CPU heatsink and fan
The Intel® Pentium® 4 LGA775 processor requires a specially designed
heatsink and fan assembly to ensure optimum thermal condition and
performance.
•
When you buy a boxed Intel® Pentium® 4 processor, the package
includes the CPU fan and heatsink assembly. If you buy a CPU
separately, make sure that you use only Intel®-certified
multi-directional heatsink and fan.
•
Your Intel® Pentium® 4 LGA775 heatsink and fan assembly comes in
a push-pin design and requires no tool to install.
•
If you purchased a separate CPU heatsink and fan assembly, make
sure that you have properly applied Thermal Interface Material to the
CPU heatsink or CPU before you install the heatsink and fan
assembly.
Make sure that you have installed the motherboard to the chassis before
you install the CPU fan and heatsink assembly.
To install the CPU heatsink and fan:
1.
Place the heatsink on top of the
installed CPU, making sure that
the four fasteners match the
holes on the motherboard.
Orient the heatsink and fan
assembly such that the CPU
fan cable is closest to the
CPU fan connector.
Narrow end
of the groove
Motherboard hole
Fastener
Make sure to orient each fastener with the narrow end of the groove
pointing outward. (The photo shows the groove shaded for emphasis.)
ASUS P5RD1-V Deluxe
2-9
2.
Push down two fasteners at
a time in a diagonal
sequence to secure the
heatsink and fan assembly in
place.
B
A
A
B
3.
A
B
B
A
Connect the CPU fan cable to the connector on the motherboard
labeled CPU_FAN.
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
P5RD1-V
®
P5RD1-V DELUXE CPU fan connector
Do not forget to connect the CPU fan connector! Hardware monitoring
errors can occur if you fail to plug this connector.
2-10
Chapter 2: Hardware information
2.3.3
Uninstalling the CPU heatsink and fan
To uninstall the CPU heatsink and fan:
1.
Disconnect the CPU fan
cable from the connector on
the motherboard.
2.
Rotate each fastener
counterclockwise.
3.
Pull up two fasteners at a
time in a diagonal sequence
to disengage the heatsink
and fan assembly from the
motherboard.
B
A
A
B
A
B
B
A
ASUS P5RD1-V Deluxe
2-11
4.
Carefully remove the
heatsink and fan assembly
from the motherboard.
5.
Rotate each fastener
clockwise to ensure correct
orientation when
reinstalling.
Narrow end of the groove
The narrow end of the
groove should point
outward after resetting.
(The photo shows the
groove shaded for
emphasis.)
2-12
Chapter 2: Hardware information
2.4
System memory
2.4.1
Overview
The motherboard comes with four 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
DIMM_B2
DIMM_A2
DIMM_B1
DIMM_A1
The following figure illustrates the location of the sockets:
P5RD1-V
®
P5RD1-V DELUXE 184-pin DDR DIMM sockets
2.4.2
Memory Configurations
You may install 256 MB, 512 MB, and 1 GB unbuffered non-ECC DDR DIMMs
into the DIMM sockets using the memory configurations in this section.
•
Always install DIMMs with the same CAS latency. For optimum
compatibility, we recommend that you obtain memory modules from
the same vendor.
•
Due to chipset resource allocation, the system may detect less than
4 GB system memory when you installed four 1 GB DDR memory
modules.
•
This motherboard does not support memory modules made up of
128 Mb chips or double sided x16 memory modules.
ASUS P5RD1-V Deluxe
2-13
Recommended DDR memory configurations
For dual-channel configuration, the total size of memory module(s)
installed per channel must be the same to ensure optimum performance.
(DIMM_A1 + DIMM_A2 = DIMM_B1 + DIMM_B2)
Channel
Sockets
Channel A
DIMM_A1 and DIMM_A2
Channel B
DIMM_B1 and DIMM_B2
In dual-channel configurations, install only i d e n t i c a l (the same type
and size) DDR DIMM pairs for each channel.
DDR (400 MHz) Qualified Vendors List
DIMM support
Size
Vendor
Model
Brand Side/s* Component
CL A B C
256 MB
KINGSTON
KVR400X64C3A/256
Hynix
SS
HY5DU56822BT-D43
–
• •
512 MB
KINGSTON
KVR400X64C3A/512
Hynix
DS
HY5DU56822BT-D43
–
• • •
• • •
256 MB
KINGSTON
KVR400X64C3A/256
Infineon
SS
HYB25D256800BT-5B –
512 MB
KINGSTON
KVR400X64C3A/512
Infineon
DS
HYB25D256809BT-5B –
256 MB
KINGSTON
KVR400X64C3A/256
KINGSTON
SS
D3208DL2T-5
512 MB
KINGSTON
• • •
3
•
KHX3200A/512
–
DS
1024 MB KINGSTON
KVR400X64C3A/1G
–
DS
1024 MB KINGSTON
KHX3200ULK2/1G
–
DS
–
2
• •
256 MB
M368L3223ETM-CCC
SS
K4H560838E-TCCC
–
• • •
SAMSUNG
SAMSUNG
–
• •
–
HYB25D512800BE-5B 3
•
• •
256 MB
SAMSUNG
M368L3223FTN-CCC
SAMSUNG
SS
K4H560838F-TCCC
4
• • •
512 MB
SAMSUNG
M368L6423FTN-CCC
SAMSUNG
DS
K4H560838F-TCCC
4
•
512 MB
SAMSUNG
M368L6523BTM-CCC
SAMSUNG
SS
K4H510838B-TCCC
4
• • •
•
256 MB
MICRON
MT8VDDT3264AG-40BCBMICRON
SS
MT46V32M8TG-5BC
–
• • •
512 MB
MICRON
MT16VDDT6464AG-40BCBMICRON
DS
MT46V32M8TG-5BC
–
• •
256 MB
Infineon
HYS64D32300HU-5-C
Infineon
SS
HYB25D256800CE-5C 3
512 MB
Infineon
HYS64D64320HU-5-C
Infineon
DS
HYB25D256800CE-5C –
256 MB
CORSAIR
CMX256A-3200C2PT
Winbond
SS
W942508BH-5
512 MB
CORSAIR
VS512MB400
VALUE seLecTDS
512 MB
CORSAIR
CMX512-3200C2
1024 MB CORSAIR
TWINX2048-3200C2
256 MB
Hynix
HYMD232645D8J-D43
512 MB
Hynix
256 MB
TwinMOS
–
DS
VS32M8-5
–
–
DS
Hynix
SS
–
HYMD264646D8J-D43
Hynix
DS
HY5DU56822DT-D43
M2G9I08AIATT9F081AADT
TwinMOS
SS
TMD7608F8E50D
HY5DU56822DT-D43
• •
• •
2
•
2.5 •
3
–
• • •
3
• • •
3
• •
2.5 • •
(Continued on the next page)
2-14
Chapter 2: Hardware information
DDR (400 MHz) Qualified Vendors List
DIMM support
Size
Vendor
Model
Brand Side/s* Component
CL A B C
512 MB
TwinMOS
M2G9J16AJATT9F081AADT
TwinMOS
DS
TMD7608F8E50D
2.5 •
256 MB
TwinMOS
M2G9I08A8ATT9F081AADT
TwinMOS
SS
TMD7608F8E50D
2.5 • •
512 MB
TwinMOS
M2G9J16A8ATT9F081AADT
TwinMOS
DS
TMD7608F8E50D
2.5 • •
256 MB
Transcend
TS32MLD64V4F3
SAMSUNG
SS
K4H560838F-TCCC
3
• • •
512 MB
Transcend
TS64MLD64V4F3
SAMSUNG
DS
K4H560838F-TCCC
3
• •
1024 MB Transcend
TS128MLD64V4J
SAMSUNG
DS
K4H510838B-TCCC
3
• •
256 MB
Apacer
77.10636.33G
Infineon
SS
HYB25D256800CE-5C 3
• • •
512 MB
Apacer
77.10736.33G
Infineon
DS
HYB25D256800CE-5C 3
• • •
256 MB
Apacer
77.10639.60G
ProMOS
SS
V58C2256804SCT5B 2.5 • • •
512 MB
Apacer
77.10739.60G
ProMOS
DS
V58C2256804SCT5B 2.5 • •
256 MB
A DATA
MDOSS6F3G31Y0K1E0Z SAMSUNG
SS
K4H560838E-TCCC
3
• • •
512 MB
A DATA
MDOSS6F3H41Y0N1E0Z SAMSUNG
DS
K4H560838F-TCCC
3
• • •
256 MB
A DATA
MDOHY6F3G31Y0N1E0Z Hynix
SS
HY5DU56822CT-D43
3
• •
512 MB
A DATA
MDOHY6F3H41Y0N1E0Z Hynix
DS
HY5DU56822CT-D43
3
• • •
256 MB
A DATA
MDOAD5F3G31Y0D1E02
–
SS
ADD8608A8A-5B
2.5 • • •
512 MB
A DATA
MDOAD5F3H41Y0D1E02
–
DS
ADD8608A8A-5B
2.5 • •
256 MB
Winbond
W9425GCDB-5
Winbond
SS
W942508CH-5
3
512 MB
Winbond
W9451GCDB-5
Winbond
DS
W942508CH-5
–
• •
256 MB
PSC
AL5D8B53T-5B1K
PSC
SS
A2S56D30BTP
2.5 • • •
512 MB
PSC
AL6D8B53T-5B1K
PSC
DS
A2S56D30BTP
2.5 • •
256 MB
KINGMAX
MPXB62D-38KT3R
–
SS
KDL388P4LA-50
512 MB
KINGMAX
MPXC22D-38KT3R
–
DS
256 MB
NANYA
NT256D64S88C0G-5T
–
SS
512 MB
NANYA
NT512D64S8HC0G-5T
–
DS
256 MB
BRAIN POWER
B6U808-256M-SAM-400 SAMSUNG
SS
512 MB
BRAIN POWER
B6U808-512M-SAM-400 SAMSUNG
256 MB
CENTURY
DXV6S8SSCCE3K27E
512 MB
CENTURY
DXV2S8SSCCE3K27E
256 MB
CENTURY
DXV6S8EL5BM3T27C
512 MB
CENTURY
DXV2S8EL5BM3T27C
256 MB
elixir
M2U25664DS88C3G-5T
–
SS
N2DS25680CT-5T
–
• •
512 MB
elixir
M2U51264DS8HC1G-5T
–
DS
N2DS25680CT-5T
–
• •
256 MB
Kreton
–
VT
SS
VT3225804T-5
–
• • •
–
VT
DS
VT3225804T-5
–
• •
VT
SS
VT56DD32M8PC-5
3
• • •
3
• •
–
• •
KDL388P4LA-50
–
• •
NT5DS32M8CT-5T
3
• •
NT5DS32M8CT-5T
3
• • •
K4H560838D-TCC4
–
• • •
DS
K4H560838D-TCC4
–
• •
SAMSUNG
SS
K4H560838E-TCCC
–
• • •
SAMSUNG
DS
K4H560838E-TCCC
–
• • •
–
SS
DD2508AMTA
–
• • •
–
DS
DD2508AMTA
–
• •
512 MB
Kreton
256 MB
Veritech
VT400FMV/2561103
512 MB
Veritech
VT400FMV/5121003
VT
DS
VT56DD32M8PC-5
256 MB
Pmi
MD44256VIT3208GMHA01
MOSEL
SS
V58C2256804SAT5B 2.5 • • •
512 MB
Pmi
MD44512VIT3208GATA03
MOSEL
DS
V58C2256804SAT5B 2.5 • •
256 MB
ProMOS
V826632K24SCTG-D0
–
SS
V58C2256804SCT5B 2.5 • • •
512 MB
ProMOS
V826664K24SCTG-D0
–
DS
V58C2256804SCT5B 2.5 • •
256 MB
Deutron
AL5D8C53T-5B1T
PSC
SS
A2S56D30CTP
2.5
512 MB
Deutron
AL6D8C53T-5B1T
PSC
DS
A2S56D30CTP
2.5 • •
•
256 MB
GEIL
GL5123200DC
–
SS
GL3LC32G88TG-35
–
• •
512 MB
GEIL
GL1GB3200DC
–
DS
GL3LC32G88TG-35
–
• •
(Continued on the next page)
ASUS P5RD1-V Deluxe
2-15
DDR (400 MHz) Qualified Vendors List
DIMM support
Size
Vendor
Model
Brand Side/s* Component
CL A B C
256 MB
GEIL
GLX2563200UP
–
SS
GL3LC32G88TG-5A
–
• •
256 MB
GEIL
GD3200-512DC
–
SS
WLCSP Package
–
• •
•
256 MB
crucial
BL3264Z402.8TG
Ballistix
SS
–
2
512 MB
crucial
BL6464Z402.16TG
Ballistix
DS
–
2
256 MB
Novax
96M425653CE-40TB6
CEON
SS
C2S56D30TP-5
2.5 •
512 MB
Novax
96M451253CE-40TB6
CEON
DS
C2S56D30TP-5
2.5
256 MB
Aeneon
AED560UD00-500C88X Aeneon
SS
AED83T500
3
•
Legend:
A - supports one module inserted into either slot, in a Single-channel memory
configuration.
B -
supports one pair of modules inserted into DIMM_A1/DIMM_A2 or DIMM_B1/
DIMM_B2 as one pair of Dual-channel memory configuration.
C -
support for four modules inserted into the blue and black slots as two pairs of
Dual-channel memory configuration.
S S - Single-sided
D S - Double-sided
Visit the ASUS website (www.asus.com) for the latest Qualified Vendors
List.
2-16
Chapter 2: Hardware information
2.4.3
Installing a DDR DIMM
Make sure to unplug the power supply before adding or removing DIMMs
or other system components. Failure to do so may cause severe damage
to both the motherboard and the components.
2
1.
Unlock a DIMM socket by
pressing the retaining clips
outward.
2.
Align a DIMM on the socket such
that the notch on the DIMM
matches the break on the
socket.
DDR DIMM notch
1
1
Unlocked retaining clip
A DDR DIMM is keyed with a notch so that it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
3.
Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the DIMM
is properly seated.
Locked Retaining Clip
2.4.4
Removing a DDR DIMM
2
To remove a DIMM:
1.
Simultaneously press the
retaining clips outward to unlock
the DIMM.
1
1
DDR DIMM notch
Support the DIMM lightly with your fingers when pressing the retaining
clips. The DIMM might get damaged when it flips out with extra force.
2.
Remove the DIMM from the socket.
ASUS P5RD1-V Deluxe
2-17
2.5
Expansion slots
In the future, you may need to install expansion cards. The following
sub-sections describe the slots and the expansion cards that they support.
Make sure to unplug the power cord before adding or removing
expansion cards. Failure to do so may cause you physical injury and
damage motherboard components.
2.5.1
Installing an expansion card
To install an expansion card:
1.
Before installing the expansion card, read the documentation that
came with it and make the necessary hardware settings for the card.
2.
Remove the system unit cover (if your motherboard is already
installed in a chassis).
3.
Remove the bracket opposite the slot that you intend to use. Keep
the screw for later use.
4.
Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5.
Secure the card to the chassis with the screw you removed earlier.
6.
Replace the system cover.
2.5.2
Configuring an expansion card
After installing the expansion card, configure it by adjusting the software
settings.
1.
Turn on the system and change the necessary BIOS settings, if any.
See Chapter 4 for information on BIOS setup.
2.
Assign an IRQ to the card. Refer to the tables on the next page.
3.
Install the software drivers for the expansion card.
2-18
Chapter 2: Hardware information
2.5.3
Interrupt assignments
Standard interrupt assignments
IRQ
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Priority
Standard Function
1
2
—
11
12
13
14
15
3
4
5
6
7
8
9
10
System Timer
Keyboard Controller
Re-direct to IRQ #9
Reserved
Communications Port (COM1)*
IRQ holder for PCI steering*
Floppy Disk Controller
Printer Port (LPT1)*
System CMOS/Real Time Clock
IRQ holder for PCI steering*
IRQ holder for PCI steering*
IRQ holder for PCI steering*
PS/2 Compatible Mouse Port*
Numeric Data Processor
Primary IDE/SATA Channel
Secondary IDE/SATA Channel
* These IRQs are usually available for ISA or PCI devices.
IRQ assignments for this motherboard
A
PCI slot 1
PCI slot 2
PCI slot 3
PCI E x1 slot 1
PCI E x1 slot 2
PCI E x1 slot 3
PCI E x16 slot
Onboard USB controller 1
Onboard USB controller 2
Onboard USB controller 3
Onboard USB 2.0 controller
Onboard LAN
Onboard HD audio
B
C
D
E
F
G
H
—
shared shared shared shared
—
—
—
—
—
shared shared shared shared
—
—
—
—
—
shared shared shared shared
—
—
—
shared
—
—
—
—
—
shared
—
—
—
—
—
—
—
—
—
—
shared —
—
—
—
shared
—
—
—
—
—
—
—
—
—
—
—
—
—
—
shared
—
—
—
shared —
—
—
—
—
—
shared
—
—
—
—
—
—
—
—
—
—
—
—
shared
—
—
—
—
—
shared
—
—
shared
—
—
—
—
—
—
—
When using PCI cards on shared slots, ensure that the drivers support
“Share IRQ” or that the cards do not need IRQ assignments. Otherwise,
conflicts will arise between the two PCI groups, making the system
unstable and the card inoperable.
ASUS P5RD1-V Deluxe
2-19
2.5.4
PCI slots
The PCI slots support cards such as a
LAN card, SCSI card, USB card, and
other cards that comply with PCI
specifications. The figure shows a
LAN card installed on a PCI slot.
2.5.5
PCI Express x16 slot
This motherboard supports PCI
Express x16 graphic cards that
comply with the PCI Express
specifications. The following figure
shows a graphics card installed on
the PCI Express x16 slot.
2.5.6
PCI Express x1 slot
This motherboard supports PCI
Express x1 network cards, SCSI cards
and other cards that comply with the
PCI Express specifications. The
following figure shows a network card
installed on the PCI Express x1 slot.
2-20
Chapter 2: Hardware information
2.6
1.
Jumpers
Clear RTC RAM (CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in
CMOS. You can clear the CMOS memory of date, time, and system
setup parameters by erasing the CMOS RTC RAM data. The onboard
button cell battery powers the RAM data in CMOS, which include
system setup information such as system passwords.
To erase the RTC RAM:
1.
Turn OFF the computer and unplug the power cord.
2.
Remove the onboard battery.
3.
Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the
cap on pins 2-3 for about 5~10 seconds, then move the cap back to
pins 1-2.
4.
Reinstall the battery.
5.
Plug the power cord and turn ON the computer.
6.
Hold down the <Del> key during the boot process and enter BIOS
setup to re-enter data.
Except when clearing the RTC RAM, never remove the cap on CLRTC
jumper default position. Removing the cap will cause system boot failure!
CLRTC
P5RD1-V
®
2
1
Normal
(Default)
3
2
Clear CMOS
P5RD1-V DELUXE Clear RTC RAM
You do not need to clear the RTC when the system hangs due to
overclocking. For system failure due to overclocking, use the C.P.R. (CPU
Parameter Recall) feature. Shut down and reboot the system so the BIOS
can automatically reset parameter settings to default values.
ASUS P5RD1-V Deluxe
2-21
2.
USB device wake-up (3-pin USBPW12, USBPW34,
USBPW56, USBPW78)
Set these jumpers to +5V to wake up the computer from S1 sleep
mode (CPU stopped, DRAM refreshed, system running in low power
mode) using the connected USB devices. Set to +5VSB to wake up
from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh,
power supply in reduced power mode).
The USBPWR12 and USBPWR34 jumpers are for the rear USB ports.
The USBPWR56 and USBPWR78 jumper is for the internal USB
connectors that you can connect to additional USB ports.
USBPW12
USBPW34
3
2
2
1
+5V
+5VSB
(Default)
P5RD1-V
USBPW56
USBPW78
®
1 2
P5RD1-V DELUXE USB device wake-up
2-22
+5V
(Default)
2 3
+5VSB
•
The USB device wake-up feature requires a power supply that can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system would not power up.
•
The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
Chapter 2: Hardware information
3.
CPU Fan type selector (3-pin FANSEL)
Set this jumper to 1-2 (Default) if you are using a 4-pin CPU fan. Set
this jumper to 2-3 if you are using a 3-pin CPU fan.
FANSEL
P5RD1-V
®
2
1
4-pin
CPU fan
(Default)
3
2
3-pin
CPU fan
P5RD1-V DELUXE CPU Fan type setting
We recommend the use of a 4-pin CPU fan.
ASUS P5RD1-V Deluxe
2-23
2.7
Connectors
2.7.1
Rear panel connectors
1
2
3
4
5 6
7
8
15
14
12
13
11
10
9
1.
P a r a l l e l p o r t . This 25-pin port connects a parallel printer, a scanner,
or other devices.
2.
I E E E 1 3 9 4 a p o r t . This 6-pin IEEE 1394a port provides high-speed
connectivity for audio/video devices, storage peripherals, PCs, or
portable devices.
L A N ( R J - 4 5 ) p o r t . This port allows Gigabit connection to a Local
Area Network (LAN) through a network hub. Refer to the table below
for the LAN port LED indications.
3.
LAN port LED indications
ACT/LINK LED
Status
Description
SPEED LED
Status
ACT/LINK SPEED
LED
LED
Description
OFF
No link
OFF
10Mbps connection
GREEN
Linked
ORANGE
100Mbps connection
BLINKING
Acting
GREEN
1Gbps connection
LAN port
4.
5.
6.
7.
2-24
R e a r S p e a k e r O u t p o r t ( g r a y ) . This port connects the rear
speakers on a 4-channel, 6-channel, or 8-channel audio configuration.
S i d e S p e a k e r O u t p o r t ( b l a c k ) . This port connects the side
speakers in an 8-channel audio configuration.
L i n e I n p o r t ( l i g h t b l u e ) . This port connects a tape, CD, DVD
player, or other audio sources.
L i n e O u t p o r t ( l i m e ) . This port connects a headphone or a
speaker. In 4-channel, 6-channel, and 8-channel configuration, the
function of this port becomes Front Speaker Out.
Chapter 2: Hardware information
8.
T V I n p o r t . This port serves as a TV tuner that allows you to watch
and record live TV on your desktop computer.
The onboard TV tuner complies with NTSC TV standard. If the TV
system in your area is PAL or SECAM, make sure you attach the
NTSC-to-PAL adaptor that comes with your motherboard package.
9 . M i c r o p h o n e p o r t ( p i n k ) . This port connects a microphone.
1 0 . C e n t e r / S u b w o o f e r p o r t ( y e l l o w o r a n g e ) . This port connects
the center/subwoofer speakers.
Refer to the audio configuration table for the function of the audio ports
in 2, 4, 6, or 8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port
Headset
2-channel
4-channel
Line In
Line In
Line In
Line In
Lime
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink
Mic In
Mic In
Mic In
Mic In
Gray
-
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Black
-
-
-
Side Speaker Out
Yellow Orange
-
-
Center/Subwoofer
Center/Subwoofer
Light Blue
6-channel
8-channel
1 1 . U S B 2 . 0 p o r t s 3 a n d 4 . These two 4-pin Universal Serial Bus
(USB) ports are available for connecting USB 2.0 devices.
1 2 . U S B 2 . 0 p o r t s 1 a n d 2 . These two 4-pin Universal Serial Bus
(USB) ports are available for connecting USB 2.0 devices.
1 3 . V i d e o G r a p h i c s A d a p t e r ( V G A ) p o r t . This port is for a VGA
monitor or other VGA-compatible devices.
1 4 . P S / 2 k e y b o a r d p o r t ( p u r p l e ) . This port is for a PS/2 keyboard.
1 5 . P S / 2 m o u s e p o r t ( g r e e n ) . This port is for a PS/2 mouse.
ASUS P5RD1-V Deluxe
2-25
2.7.2
1.
Internal connectors
Floppy disk drive connector (34-1 pin FLOPPY1)
This connector is for the provided floppy disk drive (FDD) signal cable.
Insert one end of the cable to this connector, then connect the other
end to the signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection
when using an FDD cable with a covered Pin 5.
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
P5RD1-V
®
P5RD1-V DELUXE Floppy disk drive connector
2-26
Chapter 2: Hardware information
2.
IDE connectors (40-1 pin PRI_IDE, 40-1 pin SEC IDE)
This connector is for an Ultra DMA 133/100/66 signal cable. The Ultra
DMA 133/100/66 signal cable has three connectors: a blue connector
for the primary IDE connector on the motherboard, a black connector
for an Ultra DMA 133/100/66 IDE slave device (optical drive/hard disk
drive), and a gray connector for an Ultra DMA 133/100/66 IDE master
device (hard disk drive). If you install two hard disk drives, you must
configure the second drive as a slave device by setting its jumper
accordingly. Refer to the hard disk documentation for the jumper
settings.
•
Pin 20 on the IDE connector is removed to match the covered hole
on the Ultra DMA cable connector. This prevents incorrect insertion
when you connect the IDE cable.
•
Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE
devices.
PRI_IDE
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
P5RD1-V
®
PIN 1
P5RD1-V DELUXE IDE connectors
ASUS P5RD1-V Deluxe
SEC_IDE
2-27
3.
Serial ATA connectors
(7-pin SATA1 [black], SATA2 [black], SATA3 [black],
SATA4 [black])
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
If you installed Serial ATA hard disk drives, you can can create a
RAID 0, RAID 1, RAID 0+1, and JBODconfiguration. Refer to Chapter 5
for information on creating a RAID configuration.
Enable the Serial ATA Controller item in the BIOS if you want to use the
Serial ATA RAID feature. See the S o u t h B r i d g e C o n f i g u r a t i o n for
details.
SATA3
P5RD1-V
®
SATA1
GND
RSATA_TXP3
RSATA_TXN3
GND
RSATA_RXP3
RSATA_RXN3
GND
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXP1
RSATA_RXN1
GND
P5RD1-V DELUXE SATA connectors
2-28
SATA4
SATA2
GND
RSATA_TXP4
RSATA_TXN4
GND
RSATA_RXP4
RSATA_RXN4
GND
GND
RSATA_TXP2
RSATA_TXN2
GND
RSATA_RXP2
RSATA_RXN2
GND
•
Due to chipset limitation, you cannot configure a RAID 0/JBOD set
across more than two hard disk drives.
•
Install the Windows® 2000 Service Pack 4 or the Windows® XP
Service Pack1 or later when using Serial ATA.
Chapter 2: Hardware information
4.
CPU, Chassis, and Power fan connectors
(4-pin CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN1)
The fan connectors support cooling fans of 350 mA ~ 2000 mA (24 W
max.) or a total of 1 A ~ 3.48 A (41.76 W max.) at +12 V. Connect
the fan cables to the fan connectors on the motherboard, making sure
that the black wire of each cable matches the ground pin of the
connector.
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on the
fan connectors.
CPU_FAN
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
Rotation
+12V
GND
CHA_FAN1
CHA_FAN1
P5RD1-V
PWR_FAN
®
PWR_FAN
GND
+12V
Rotation
P5RD1-V DELUXE Fan connectors
ASUS P5RD1-V Deluxe
2-29
5.
Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port
module cable to this connector, then install the module to a slot
opening at the back of the system chassis.
COM1
PIN 1
P5RD1-V
®
P5RD1-V DELUXE Serial port connector
USB+5V
USB_P8USB_P8+
GND
NC
P5RD1-V
USB+5V
USB_P6USB_P6+
GND
NC
USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB/GAME
module cable to any of these connectors, then install the module to a
slot opening at the back of the system chassis. These USB connectors
comply with USB 2.0 specification that supports up to 480 Mbps
connection speed.
®
1
P5RD1-V DELUXE USB 2.0 connectors
USB56
USB+5V
USB_P7USB_P7+
GND
USB78
1
USB+5V
USB_P5USB_P5+
GND
6.
Never connect a 1 3 9 4 c a b l e to the USB connectors. Doing so will
damage the motherboard!
2-30
Chapter 2: Hardware information
7.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for an ATX power supply. The plugs from the
power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
•
Use of an ATX 12 V Specification 2.0-compliant power supply unit
(PSU) that provides a minimum power of 350 W is recommended
for a fully-configured system.
•
Do not forget to connect the 4-pin ATX +12 V power plug;
otherwise, the system will not boot up.
•
Use of a PSU with a higher power output is recommended when
configuring a system with more power-consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
•
You can use a 20-pin ATX power supply unit if you will only use the
onboard VGA port.
•
Use a 24-pin ATX power supply unit when installing an add-on PCI
Express x16 graphics card.
EATXPWR
+3 Volts
+12 Volts
+12 Volts
+12V DC
+12V DC +5V Standby
Power OK
GND
GND
Ground
+5 Volts
Ground
+5 Volts
Ground
+3 Volts
power connectors
+3 Volts
ATX12V
P5RD1-V
®
P5RD1-V DELUXE ATX
ASUS P5RD1-V Deluxe
Ground
+5 Volts
+5 Volts
+5 Volts
-5 Volts
Ground
Ground
Ground
PSON#
Ground
-12 Volts
+3 Volts
2-31
Optical drive audio connector (4-pin CD)
This connector is for the 4-pin audio cable that connects to the audio
connector at the back of the optical drive.
P5RD1-V
Right Audio Channel
Ground
Ground
Left Audio Channel
8.
®
CD
P5RD1-V DELUXE CD audio connector
9.
GAME/MIDI port connector (16-1 pin GAME)
This connector is for a GAME/MIDI port. Connect the USB/GAME
module cable to this connector, then install the module to a slot
opening at the back of the system chassis. The GAME/MIDI port
connects a joystick or game pad for playing games, and MIDI devices
for playing or editing audio files.
P5RD1-V
GAME
P5RD1-V DELUXE GAME connector
+5V
J1B1
J1CX
GND
GND
J1CY
J1B2
+5V
+5V
J2B1
J2CX
MIDI_OUT
J2CY
J2B2
MIDI_IN
®
The GAME/MIDI module is purchased separately.
2-32
Chapter 2: Hardware information
1 0 . Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or
switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends a
high-level signal to this connector when a chassis component is
removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
®
Chassis Signal
GND
P5RD1-V
+5VSB_MB
CHASSIS
(Default)
P5RD1-V DELUXE Chassis intrusion connector
1 1 . IEEE 1394a connector (10-1 pin IE1394_1)
This connector is for the IEEE 1394a module. Connect the the IEEE
1394a module cable to this connector, then install the module to a
slot opening at the back of the system chassis.
P5RD1-V
TPA1GND
TPB1+12V
GND
®
P5RD1-V DELUXE IEEE-1394 connector
1
TPA1+
GND
TPB1+
+12V
IE1394_1
Never connect a U S B c a b l e to the USB connectors. Doing so will
damage the motherboard!
ASUS P5RD1-V Deluxe
2-33
1 2 . Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module
that supports either HD Audio or legacy AC ‘97 audio standard.
Connect one end of the front panel audio I/O module cable to this
connector.
NC
Legacy AC’97-compliant
pin definition
AGND
NC
NC
P5RD1-V
SENSE2_RETUR
GND
PRESENCE#
SENSE1_RETUR
Azalia-compliant
pin definition
AAFP
MIC2
MICPWR
Line out_R
NC
Line out_L
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
®
P5RD1-V DELUXE Analog front panel connector
•
We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard’s
high-definition audio capability.
•
By default, this connector is set to legacy Azalia only (high
definition audio). If you want to enable support for legacy AC`97
audio, disable the A C 9 7 & A z a l i a L I N K A item in the
Southbridge configuration section of the Advanced Menu. See page
4-28 for details.
1 3 . Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface
(S/PDIF) port(s). Connect the S/PDIF module cable to this connector,
then install the module to a slot opening at the back of the system
chassis.
P5RD1-V TV
SPDIFOUT
GND
SPDIF_OUT
+5V
®
P5RD1-V TV Digital audio connector
The S/PDIF module is purchased separately.
2-34
Chapter 2: Hardware information
1 4 . TV capture in connector (16-1 pin CAP_IN)
This connector is for a video capture cable module that allows you to
capture and save video files into your computer.
TV S-OUT(S-Video)
TV-out/capture-in module
TV C-OUT(RCA Jack)
CAP S-IN
CAP C-IN
Capture-in
®
S-video Y-in
CVBS inputs
GND
GND
GND
GND
S-video C-in
CAP AL-IN
P5RD1-V
CAP AR-IN
P5RD1-V DELUXE Capture-in connector
GND
GND
GND
GND
GND
GND
Audio in Right
Audio in Left
CAP_IN
1 5 . TV out connector (6-1 pin TV_OUT)
This connector is for a TV out cable module that allows your television
screen to be used as a monitor for your desktop computer.
TV-out
TV-out/capture-in module
TV S-OUT
TV C-OUT
CAP S-IN(S Video)
P5RD1-V
®
CAP C-IN(RCA Jack)
CAP AL-IN(Audio Left)
CAP AR-IN(Audio Right)
P5RD1-V DELUXE TV-out connector
ASUS P5RD1-V Deluxe
2-35
1 6 . System panel connector (20-pin PANEL)
This connector supports several chassis-mounted functions.
+5V
Ground
Ground
Speaker
SPEAKER
IDE LED
Reset
Ground
PANEL
PWR
Ground
®
IDE_LED+
IDE_LED-
P5RD1-V
PLED-
PLED+
PLED
RESET
PWR
P5RD1-V DELUXE System panel connector
The sytem panel connector is color-coded for easy connection. Refer to
the connector description below for details.
•
System power LED (Green 3-pin PLED)
This 3-pin connector is for the system power LED. Connect the
chassis power LED cable to this connector. The system power LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
•
Hard disk drive activity (Red 2-pin IDE LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
System warning speaker (Orange 4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning
speaker. The speaker allows you to hear system beeps and warnings.
Power/Soft-off button (Yellow 2-pin PWR)
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-OFF
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
Reset button (Blue 2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.
•
•
•
2-36
Chapter 2: Hardware information
This chapter describes the power up
sequence, the vocal POST messages,
and ways of shutting down the
system.
3
Powering up
Chapter summary
3
3.1
Starting up for the first time ................................................ 3-1
3.2
Powering off the computer .................................................. 3-2
ASUS P5RD1-V Deluxe
3.1
Starting up for the first time
1.
After making all the connections, replace the system case cover.
2.
Be sure that all switches are off.
3.
Connect the power cord to the power connector at the back of the
system chassis.
4.
Connect the power cord to a power outlet that is equipped with a
surge protector.
5.
Turn on the devices in the following order:
a. Monitor
b. External SCSI devices (starting with the last device on the chain)
c. System power
6.
After applying power, the system power LED on the system front
panel case lights up. For systems withATX power supplies, the system
LED lights up when you press the ATX power button. If your monitor
complies with “green” standards or if it has a “power standby”
feature, the monitor LED may light up or switch between orange and
green after the system LED turns on.
The system then runs the power-on self tests or POST. While the
tests are running, the BIOS beeps (see BIOS beep codes table below)
or additional messages appear on the screen. If you do not see
anything within 30 seconds from the time you turned on the power,
the system may have failed a power-on test. Check the jumper
settings and connections or call your retailer for assistance.
AMI BIOS beep codes
7.
Beep Description
Error
One beep
Keyboard controller error
Refresh Time error
No master drive detected
Two continuous beeps followed by
two short beeps
Floppy controller failure
Two continuous beeps followed by
four short beeps
Hardware component failure
At power on, hold down the <Delete> key to enter the BIOS Setup.
Follow the instructions in Chapter 4.
ASUS P5RD1-V Deluxe
3-1
3.2
Powering off the computer
3.2.1
Using the OS shut down function
If you are using Windows® 2000:
2.
Click the S t a r t button then click S h u t D o w n . . .
Make sure that the S h u t D o w n option button is selected, then click
the O K button to shut down the computer.
3.
The power supply should turn off after Windows® shuts down.
1.
If you are using Windows® XP:
2.
Click the S t a r t button then select T u r n O f f C o m p u t e r .
Click the T u r n O f f button to shut down the computer.
3.
The power supply should turn off after Windows® shuts down.
1.
3.2.2
Using the dual function power switch
While the system is ON, pressing the power switch for less than four
seconds puts the system to sleep mode or to soft-off mode, depending on
the BIOS setting. Pressing the power switch for more than four seconds
lets the system enter the soft-off mode regardless of the BIOS setting.
Refer to section “4.5 Power Menu” in Chapter 4 for details.
3-2
Chapter 3: Powering up
This chapter tells how to change
the system settings through the BIOS
Setup menus. Detailed descriptions
of the BIOS parameters are also
provided.
4
BIOS setup
Chapter summary
4
4.1
Managing and updating your BIOS ........................................ 4-1
4.2
BIOS setup program ........................................................... 4-11
4.3
Main menu .......................................................................... 4-14
4.4
Advanced menu .................................................................. 4-18
4.5
Power menu ........................................................................ 4-32
4.6
Boot menu .......................................................................... 4-36
4.7
Exit menu ........................................................................... 4-40
ASUS P5RD1-V Deluxe
4.1
Managing and updating your BIOS
The following utilities allow you to manage and update the motherboard
Basic Input/Output System (BIOS) setup.
1.
A S U S A F U D O S (Updates the BIOS in DOS mode using a bootable
floppy disk.)
2.
A S U S E Z F l a s h (Updates the BIOS using a floppy disk during POST.)
A S U S C r a s h F r e e B I O S 2 (Updates the BIOS using a bootable
floppy disk or the motherboard support CD when the BIOS file fails or
gets corrupted.)
A S U S U p d a t e (Updates the BIOS in Windows® environment.)
3.
4.
Refer to the corresponding sections for details on these utilities.
Save a copy of the original motherboard BIOS file to a bootable floppy
disk in case you need to restore the BIOS in the future. Copy the original
motherboard BIOS using the ASUS Update or AFUDOS utilities.
4.1.1
1.
Creating a bootable floppy disk
Do either one of the following to create a bootable floppy disk.
DOS environment
a. Insert a 1.44MB floppy disk into the drive.
b. At the DOS prompt, type format A:/S then press <Enter>.
Windows® XP environment
a. Insert a 1.44 MB floppy disk to the floppy disk drive.
b. Click S t a r t from the Windows® desktop, then select M y
C o m p u t e rr.
c. Select the 3 1/2 Floppy Drive icon.
d. Click F i l e from the menu, then select F o r m a tt. A F o r m a t 3 1 / 2
F l o p p y D i s k window appears.
e. Select C r e a t e a n M S - D O S s t a r t u p d i s k from the format
options field, then click S t a r tt.
Windows® 2000 environment
To create a set of boot disks for Windows® 2000:
a. Insert a formatted, high density 1.44 MB floppy disk into the drive.
b. Insert the Windows® 2000 CD to the optical drive.
c. Click S t a r tt, then select R u n
n.
ASUS P5RD1-V Deluxe
4-1
d. From the Open field, type
D:\bootdisk\makeboot a:
assuming that D: is your optical drive.
e. Press <Enter>, then follow screen instructions to continue.
2.
Copy the original or the latest motherboard BIOS file to the bootable
floppy disk.
4.1.2
AFUDOS utility
The AFUDOS utility allows you to update the BIOS file in DOS environment
using a bootable floppy disk with the updated BIOS file. This utility also
allows you to copy the current BIOS file that you can use as backup when
the BIOS fails or gets corrupted during the updating process.
Copying the current BIOS
To copy the current BIOS file using the AFUDOS utility:
•
Make sure that the floppy disk is not write-protected and has at
least 600 KB free space to save the file.
•
The succeeding BIOS screens are for reference only. The actual BIOS
screen displays may not be exactly the same as shown.
1.
Copy the AFUDOS utility (afudos.exe) from the motherboard support
CD to the bootable floppy disk you created earlier.
2.
Boot the system in DOS mode, then at the prompt type:
afudos /o[filename]
where the [filename] is any user-assigned filename not more than
eight alphanumeric characters for the main filename and three
alphanumeric characters for the extension name.
A:\>afudos /oOLDBIOS1.ROM
Main filename
4-2
Extension name
Chapter 4: BIOS setup
3.
Press <Enter>. The utility copies the current BIOS file to the floppy
disk.
A:\>afudos /oOLDBIOS1.ROM
AMI Firmware Update Utility - Version 1.10
Copyright (C) 2002 American Megatrends, Inc. All rights reserved.
Reading flash ..... done
A:\>
The utility returns to the DOS prompt after copying the current BIOS
file.
Updating the BIOS file
To update the BIOS file using the AFUDOS utility:
1.
Visit the ASUS website (www.asus.com) and download the latest BIOS
file for the motherboard. Save the BIOS file to a bootable floppy disk.
Write the BIOS filename on a piece of paper. You need to type the exact
BIOS filename at the DOS prompt.
2.
Copy the AFUDOS utility (afudos.exe) from the motherboard support
CD to the bootable floppy disk you created earlier.
3.
Boot the system in DOS mode, then at the prompt type:
afudos /i[filename]
where [filename] is the latest or the original BIOS file on the bootable
floppy disk.
A:\>afudos /iP5RD1VD.ROM
ASUS P5RD1-V Deluxe
4-3
4.
The utility verifies the file and starts updating the BIOS.
A:\>afudos /iP5RD1VD.ROM
AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))
Copyright (C) 2003 American Megatrends, Inc. All rights reserved.
WARNING!! Do not turn off power during flash BIOS
Reading file ..... done
Reading flash .... done
Advance Check........
Erasing flash .... done
Writing flash .... 0x0008CC00 (9%)
Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
5.
The utility returns to the DOS prompt after the BIOS update process is
completed. Reboot the system from the hard disk drive.
A:\>afudos /iP5RD1VD.ROM
AMI Firmware Update Utility - Version 1.19(ASUS V2.07(03.11.24BB))
Copyright (C) 2003 American Megatrends, Inc. All rights reserved.
WARNING!! Do not turn off power during flash BIOS
Reading file ..... done
Reading flash .... done
Search bootblock version
Advance Check.........
Erasing flash ..... done
Writing flash ..... done
Verifying flash ... done
Please restart your computer
A:\>
4-4
Chapter 4: BIOS setup
4.1.3
ASUS EZ Flash utility
The ASUS EZ Flash feature allows you to update the BIOS without having to
go through the long process of booting from a floppy disk and using a
DOS-based utility. The EZ Flash utility is built-in the BIOS chip so it is
accessible by pressing <Alt> + <F2> during the Power-On Self Tests
(POST).
To update the BIOS using EZ Flash:
1.
Visit the ASUS website (www.asus.com) to download the latest BIOS
file for the motherboard and rename the same to P 5 R D 1 V D . R O M
M.
2.
Save the BIOS file to a floppy disk, then restart the system.
3.
Press <Alt> + <F2> during POST to display the following.
EZFlash starting BIOS update
Checking for floppy...
4.
Insert the floppy disk that contains the BIOS file to the floppy disk
drive. When the correct BIOS file is found, EZ Flash performs the BIOS
update process and automatically reboots the system when done.
EZFlash starting BIOS update
Checking for floppy...
Floppy found!
Reading file “P5RD1VD.ROM”. Completed.
Start erasing.......|
Start programming...|
Flashed successfully. Rebooting.
•
Do not shut down or reset the system while updating the BIOS to
prevent system boot failure!
•
A “Floppy not found!” error message appears if there is no floppy
disk in the drive. A “P5RD1VD.ROM not found!” error message
appears if the correct BIOS file is not found in the floppy disk. Make
sure that you rename the BIOS file to P5RD1VD.ROM.
ASUS P5RD1-V Deluxe
4-5
4.1.4
ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to
restore the BIOS file when it fails or gets corrupted during the updating
process. You can update a corrupted BIOS file using the motherboard
support CD or the floppy disk that contains the updated BIOS file.
•
Prepare the motherboard support CD or the floppy disk containing
the updated motherboard BIOS before using this utility.
•
Make sure that you rename the original or updated BIOS file in the
floppy disk to P 5 R D 1 V D . R O M
M.
Recovering the BIOS from a floppy disk
To recover the BIOS from a floppy disk:
1.
Turn on the system.
2.
Insert the floppy disk with the original or updated BIOS file to the
floppy disk drive.
3.
The utility displays the following message and automatically checks
the floppy disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
When found, the utility reads the BIOS file and starts flashing the
corrupted BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “P5RD1VD.ROM”. Completed.
Start flashing...
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!
4.
4-6
Restart the system after the utility completes the updating process.
Chapter 4: BIOS setup
Recovering the BIOS from the support CD
To recover the BIOS from the support CD:
1.
Remove any floppy disk from the floppy disk drive, then turn on the
system.
2.
Insert the support CD to the optical drive.
3.
The utility displays the following message and automatically checks
the floppy disk for the original or updated BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
When no floppy disk is found, the utility automatically checks the
optical drive for the original or updated BIOS file. The utility then
updates the corrupted BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found!
Reading file “P5RD1VD.ROM”. Completed.
Start flashing...
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!
4.
Restart the system after the utility completes the updating process.
The recovered BIOS may not be the latest BIOS version for this
motherboard. Visit the ASUS website (www.asus.com) to download the
latest BIOS file.
ASUS P5RD1-V Deluxe
4-7
4.1.5
ASUS Update utility
The ASUS Update is a utility that allows you to manage, save, and update
the motherboard BIOS in Windows® environment. The ASUS Update utility
allows you to:
• Save the current BIOS file
• Download the latest BIOS file from the Internet
• Update the BIOS from an updated BIOS file
• Update the BIOS directly from the Internet, and
• View the BIOS version information.
This utility is available in the support CD that comes with the motherboard
package.
ASUS Update requires an Internet connection either through a network
or an Internet Service Provider (ISP).
Installing ASUS Update
To install ASUS Update:
2.
Place the support CD in the optical drive. The D r i v e r s menu appears.
Click the U t i l i t i e s tab, then click I n s t a l l A S U S U p d a t e
VX.XX.XX
X. See page 5-3 for the U t i l i t i e s screen menu.
3.
The ASUS Update utility is copied to your system.
1.
Quit all Windows® applications before you update the BIOS using this
utility.
4-8
Chapter 4: BIOS setup
Updating the BIOS through the Internet
To update the BIOS through the Internet:
1.
Launch the ASUS Update utility from the Windows® desktop by clicking
Start > Programs > ASUS > ASUSUpdate > ASUSUpdate
e. The
ASUS Update main window appears.
2.
Select U p d a t e B I O S f r o m
t h e I n t e r n e t option from the
drop-down menu, then click
N e x tt.
ASUS P5RD1-V Deluxe
3.
Select the ASUS FTP site
nearest you to avoid network
traffic, or click A u t o S e l e c tt.
Click N e x tt.
4-9
4.
From the FTP site, select the
BIOS version that you wish to
download. Click Next.
5.
Follow the screen instructions to
complete the update process.
The ASUS Update utility is
capable of updating itself
through the Internet. Always
update the utility to avail all
its features.
Updating the BIOS through a BIOS file
To update the BIOS through a BIOS file:
1.
2.
Launch the ASUS Update utility from the Windows® desktop by
clicking S t a r t > P r o g r a m s > A S U S > A S U S U p d a t e >
ASUSUpdate
e. The ASUS Update main window appears.
Select U p d a t e B I O S f r o m a
f i l e option from the drop-down
menu, then click N e x tt.
3.
Locate the BIOS file from the
O p e n window, then click S a v e
e.
4.
Follow the screen instructions to
complete the update process.
4-10
Chapter 4: BIOS setup
4.2
BIOS setup program
This motherboard supports a programmable firmware chip that you can
update using the provided utility described in section “4.1 Managing and
updating your BIOS.”
Use the BIOS Setup program when you are installing a motherboard,
reconfiguring your system, or prompted to “Run Setup.” This section
explains how to configure your system using this utility.
Even if you are not prompted to use the Setup program, you can change
the configuration of your computer in the future. For example, you can
enable the security password feature or change the power management
settings. This requires you to reconfigure your system using the BIOS
Setup program so that the computer can recognize these changes and
record them in the CMOS RAM of the firmware hub.
The firmware hub on the motherboard stores the Setup utility. When you
start up the computer, the system provides you with the opportunity to
run this program. Press <Del> during the Power-On-Self-Test (POST) to
enter the Setup utility; otherwise, POST continues with its test routines.
If you wish to enter Setup after POST, restart the system by pressing
<Ctrl+Alt+Delete>, or by pressing the reset button on the system chassis.
You can also restart by turning the system off and then back on. Do this
last option only if the first two failed.
The Setup program is designed to make it as easy to use as possible. Being
a menu-driven program, it lets you scroll through the various sub-menus
and make your selections from the available options using the navigation
keys.
•
The default BIOS settings for this motherboard apply for most
conditions to ensure optimum performance. If the system becomes
unstable after changing any BIOS settings, load the default settings
to ensure system compatibility and stability. Select the L o a d
D e f a u l t S e t t i n g s item under the Exit Menu. See section “4.7 Exit
Menu.”
•
The BIOS setup screens shown in this section are for reference
purposes only, and may not exactly match what you see on your
screen.
•
Visit the ASUS website (www.asus.com) to download the latest BIOS
file for this motherboard.
ASUS P5RD1-V Deluxe
4-11
4.2.1
BIOS menu screen
Menu items
Configuration fields
Menu bar
System Time
System Date
Legacy Diskette A
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
:
:
:
:
General help
[16:37:21]
[Tue,01/11/2005]
[1.44M, 3.5 in.]
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
[ST320413A]
[ASUS CD-S520/A]
[Not Detected]
[Not Detected]
Use [+] or [-] to
configure the System
time.
System Information
Sub-menu items
4.2.2
Navigation keys
Menu bar
The menu bar on top of the screen has the following main items:
Main
Advanced
For changing the basic system configuration
For changing the advanced system settings
Power
For changing the advanced power management (APM)
configuration
Boot
Exit
For changing the system boot configuration
For selecting the exit options and loading default
settings
To select an item on the menu bar, press the right or left arrow key on the
keyboard until the desired item is highlighted.
4.2.3
Navigation keys
At the bottom right corner of a menu screen are the navigation keys for
that particular menu. Use the navigation keys to select items in the menu
and change the settings.
Some of the navigation keys differ from one screen to another.
4-12
Chapter 4: BIOS setup
4.2.4
Menu items
The highlighted item on the menu
bar displays the specific items for
that menu. For example, selecting
M a i n shows the Main menu items.
The other items (Advanced, Power,
Boot, and Exit) on the menu bar
have their respective menu items.
4.2.5
System Time
System Date
Legacy Diskette A
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
[16:37:21]
[Tue, 01/11/2005]
[1.44M, 3.5 in]
: [ST320413A]
: [ASUS CD-S520/A]
: [Not Detected]
: [Not Detected]
System Information
Main menu items
Sub-menu items
A solid triangle before each item on any menu screen means that the item
has a sub-menu. To display the sub-menu, select the item and press
<Enter>.
4.2.6
Configuration fields
These fields show the values for the menu items. If an item is
user-configurable, you can change the value of the field opposite the item.
You cannot select an item that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when
selected. To change the value of a field, select it then press <Enter> to
display a list of options. Refer to “4.2.7 Pop-up window.”
4.2.7
Pop-up window
Select a menu item then press <Enter> to display a pop-up window with
the configuration options for that item.
4.2.8
Scroll bar
A scroll bar appears on the right side
of a menu screen when there are
items that do not fit on the screen.
Press the
Up/Down arrow keys or <Page Up> /
<Page Down> keys to display the
other items on the screen.
4.2.9
General help
At the top right corner of the menu
screen is a brief description of the
selected item.
ASUS P5RD1-V Deluxe
Advanced PCI/PnP Settings
WARNING: Setting wrong values in
below sections may cause system to
malfunction.
Plug And Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
[No]
[64]
[Yes]
[Disabled]
[Enabled]
Pop-up window
Scroll bar
4-13
4.3
Main menu
When you enter the BIOS Setup program, the Main menu screen appears,
giving you an overview of the basic system information.
Refer to section “4.2.1 BIOS menu screen” for information on the menu
screen items and how to navigate through them.
System Time
System Date
Legacy Diskette A
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Fourth IDE Master
Fifth IDE Master
Sixth IDE Master
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
[16:37:21]
[Tue,09/21/2004]
[1.44M, 3.5 in.]
:
:
:
:
:
:
:
:
[ST320413A]
[ASUS CD-S520/A]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Use [+] or [-] to
configure the System
time.
System Information
The T h i r d I D E M a s t e r , F o u r t h I D E M a s t e r , F i f t h I D E M a s t e r ,
a n d S i x t h I D E M a s t e r items appear only if the O n b o a r d S A T A
B o o t R O M is set to [Disabled]. See page 4-28 for details.
4.3.1
System Time [xx:xx:xx]
Allows you to set the system time.
4.3.2
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
4.3.3
Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [Disabled]
[360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.]
[2.88M, 3.5 in.]
4-14
Chapter 4: BIOS setup
4.3.4
Primary, Secondary, Third, Fourth, Fifth, and
Sixth IDE Master/Slave
While entering Setup, the BIOS automatically detects the presence of IDE
devices. There is a separate sub-menu for each IDE device. Select a device
item then press <Enter> to display the IDE device information.
Primary IDE Master
Device
Vendor
Size
LBA Mode
Block Mode
PIO Mode
Async DMA
Ultra DMA
SMART Monitoring
:
:
:
:
:
:
:
:
:
Hard Disk
ST320413A
20.0GB
Supported
16 Sectors
4
MultiWord DMA-2
Ultra DMA-2
Supported
Select the type of
device connected to
the system.
Type
[Auto]
LBA/Large Mode
[Auto]
Block(Multi-sector Transfer) M [Auto]
PIO Mode
[Auto]
DMA Mode
[Auto]
SMART Monitoring
[Auto]
32Bit Data Transfer
[Disabled]
The BIOS automatically detects the values opposite the dimmed items
(Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra
DMA, and SMART monitoring). These values are not user-configurable.
These items show N/A if no IDE device is installed in the system.
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection of
the appropriate IDE device type. Select CDROM if you are specifically
configuring a CD-ROM drive. Select ARMD (ATAPI Removable Media Device)
if your device is either a ZIP, LS-120, or MO drive.
Configuration options: [Not Installed] [Auto] [CDROM] [ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to Auto enables the LBA mode if
the device supports this mode, and if the device was not previously
formatted with LBA mode disabled. Configuration options: [Disabled]
[Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the
data transfer from and to the device occurs multiple sectors at a time if
the device supports multi-sector transfer feature. When set to [Disabled],
the data transfer from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
ASUS P5RD1-V Deluxe
4-15
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0]
[SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
4-16
Chapter 4: BIOS setup
4.3.5
System Information
This menu gives you an overview of the general system specifications. The
BIOS automatically detects the items in this menu.
AMIBIOS
Version
: 08.00.10
Build Date : 01/10/05
Processor
Type
Speed
Count
: Genuine Intel(R) CPU 3.20 GHz
: 3200 MHz
: 1
System Memory
Size
: 192 MB
AMI BIOS
Displays the auto-detected BIOS information.
Processor
Displays the auto-detected CPU specification.
System Memory
Displays the auto-detected system memory.
ASUS P5RD1-V Deluxe
4-17
4.4
Advanced menu
The Advanced menu items allow you to change the settings for the CPU
and other system devices.
Take caution when changing the settings of the Advanced menu items.
Incorrect field values can cause the system to malfunction.
Adjust system
frequency/voltage
USB Configuration
JumperFree Configuration
LAN Cable Status
CPU Configuration
Chipset
Onboard Devices Configuration
PCI PnP
4.4.1
USB Configuration
The items in this menu allow you to change the USB-related features.
Select an item then press <Enter> to display the configuration options.
Enables USB host
controllers.
USB Configuration
Module Version - 2.24.0-10.4
USB Devices Enabled: None
USB Controller
Legacy USB Support
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
[USB OHCI + EHCI]
[Auto]
[HiSpeed]
[Enabled]
The M o d u l e V e r s i o n and U S B D e v i c e s E n a b l e d items show the
auto-detected values. If no USB device is detected, the item shows
None
e.
USB Controller [USB OHCI + EHCI]
Allows you to disable or select the USB controller.
Configuration options: [Disabled] [USB OHCI] [USB OHCI + EHCI]
4-18
Chapter 4: BIOS setup
Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to
Auto allows the system to detect the presence of USB devices at startup.
If detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled. Configuration options:
[Disabled] [Enabled] [Auto]
USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed ]
BIOS EHCI Hand-Off [Enabled]
Allows you to enable or disable this workaround for operating systems
without EHCI hand-off support. Configuration options: [Disabled] [Enabled]
ASUS P5RD1-V Deluxe
4-19
4.4.2
JumperFree Configuration
Configure System Frequency/Voltage
AiBooster Support
AI Overclocking
PCIE Frequency
SPECTRUM
[Enabled]
[Auto]
[100]
[Auto]
DDR Voltage
VCore Voltage Select
Over NB Core Voltage 1.2V
Over PCIE Voltage 1.8V
[Auto]
[Auto]
[Auto]
[Auto]
AiBooster Support [Enabled]
Allows you to enable or disable support for Ai Booster.
Configuration options: [Disabled] [Enabled]
AI Overclocking [Auto]
Allows selection of CPU overclocking options to achieve desired CPU
internal frequency. Select either one of the preset overclocking
configuration options:
Manual
Allows you to individually set overclocking parameters.
Auto
Loads the optimal settings for the system.
Standard
Loads the standard settings for the system.
O v e r c l o c k P r o f l e Loads overclocking profiles with optimal parameters for
stability when overclocking.
AI N.O.S.
4-20
The ASUS AI Non-delay Overclocking System feature
intelligently determines the system load and automatically
boost the performance for the most demanding tasks.
Chapter 4: BIOS setup
The following items appear only when you set the A I O v e r c l o c k i n g
item to [Manual].
CPU Frequency [XXX]
Displays the frequency sent by the clock generator to the system bus
and PCI bus. The value of this item is auto-detected by the BIOS. Use
the < + > and < - > keys to adjust the CPU frequency. You can also
type the desired CPU frequency using the numberic keypad. The
values range from 100 to 400. Refer to the table below for the
correct Front Side Bus and CPU External Frequency settings.
FSB/CPU External Frequency Synchronization
Front Side Bus
CPU External Frequency
FSB 800
200 MHz
FSB 533
133 MHz
Memory Clock Mode [Auto]
Allows you to synchronize the PCI frequency with the PCI Express or
CPU frequency. Configuration options: [Auto] [Sync to CPU]
[Async Manual Mode]
Memory Frequency [xxx]
Allows you to set the memory frequency. This item appears only when
the M e m o r y C l o c k M o d e item is set to [Async Manual Mode]. The
value of this item is auto-detected by the BIOS. Use the < + > and < - >
keys to adjust the memory frequency. You can also type the desired
CPU frequency using the numberic keypad. The values range from 100
to 300.
The following item appears only when the A I O v e r c l o c k i n g item is set
to [Overclock Profile].
Overclock Options [Overclock 5%]
Allows you to overclock the CPU speed through the available preset
values. Configuration options:
[Overclock 5%]
[FSB 900]
[Overclock 10%]
[FSB 950]
[Overclock 15%]
[FSB 1000]
[Overclock 20%]
[FSB 1066]
[Overclock 30%]
ASUS P5RD1-V Deluxe
4-21
The following item appears when the A I O v e r c l o c k i n g item is set to
[AI N.O.S].
N.O.S Mode [Auto]
Sets the Non-Delay Overclocking System mode. Select either of the
following configuration options:
A u t o - loads the optimum sensitivity and overclocking percentage
setting.
S t a n d a r d - activates overclocking on a threshold between light and
heavy CPU loading.
S e n s i t i v e - activates overclocking on a light CPU loading.
H e a v y L o a d - activates overclocking on a heavy CPU loading.
The following item appeasr only when the N O S M o d e item is set to
[Standard], [Sensitive], or [Heavy].
Turbo N.O.S [Overclock 3%]
Allows you to disable or set the overclock percentage for the selected
NOS Mode. Configuration options: [Overclock 3%] [Overclock 5%]
[Overclock 7%] [Overclock 10%] [Overclock 15%] [Overclock 20%]
PCIE Frequency [100]
Allows you to set the PCI Express frequency. Key in your desired frequency
using the numeric keypad.
SPECTRUM [Auto]
Allows you to disable or automatically set the clock generator spread
spectrum. Configuration options: [Disabled] [Enabled] [Auto]
DDR Voltage [Auto]
Sets the operating DDR voltage.
Configuration options: [Auto] [2.50 V] [2.60 V] [2.70 V] [2.80 V]
4-22
Chapter 4: BIOS setup
VCore Voltage Select [Auto]
Sets the operating Vcore voltage. Configuration options: [Auto]
[1.7000V] [1.675V] [1.6750V] [1.6500V] [1.6375V] [1.6250V]
[1.6125V] [1.600V] [1.5875V] [1.5750V] [1.5625V] [1.5500V]
[1.5375V] [1.5250V] [1.5125V] [1.5000V] [1.4875V] [1.4750V]
[1.4625V] [1.4500V] [1.4375V] [1.4250V] [1.4125V] [1.4000V]
[1.3875V] [1.3750V] [1.3625V] [1.3500V] [1.3375V] [1.3250V]
[1.3125V] [1.3000V] [1.3875V] [1.3750V] [1.3625V] [1.3500V]
[1.3375V] [1.3250V] [1.3125V] [1.3000V] [1.2875V] [1.2750V]
[1.2625V] [1.2500V] [1.2375V] [1.2250V] [1.2125V] [1.2000V]
[1.1875V] [1.1750V] [1.1625V] [1.1500V] [1.1375V] [1.1250V]
[1.1125V] [1.1000V]
Over NB Core Voltage 1.2V [Auto]
Allows you enable or disable the feature to increase the Northbridge core
voltage by 0.1 V. Configuration options: [Auto] [Disabled] [Enabled]
Over PCIE Voltage 1.8V [Auto]
Allows you to enable or disable the feature to increase the PCI Express core
voltage by 0.1 V. Configuration options: [Auto] [Disabled] [Enabled]
4.4.3
LAN Cable Status
The items in this menu display the status of the Local Area Network (LAN)
cable.
POST Check LAN cable
LAN Cable Status
Pair
Status
Length
1-2
3-6
4-5
7-8
0.0M
0.0M
0.0M
0.0M
Open
Open
Open
Open
[Disabled]
Check LAN cable
during POST.
POST Check LAN cable [Disabled]
Enables or disables checking of the LAN cable during POST.
Configuration options: [Disabled] [Enabled]
ASUS P5RD1-V Deluxe
4-23
4.4.4
CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Configure advanced CPU Settings
Manufacturer : Intel
Brand String : Genuine Intel (R) CPU 3.20GHz
Frequency
: 3200 MHz
FSB Speed
: 800 MHz
Cache L1
: 16 KB
Cache L2
: 1024 KB
Cache L3
: 0 KB
Ratio Status: Unlocked
Ratio Actual Value : 16
Ratio CMOS Setting:
[ 19]
HyperThreading Function
[Enabled]
Microcode Updation:
[Enabled]
Max CPUID Value Limit:
[Disabled]
Enhanced C1 Control
[Auto]
CPU Internal Thermal Control
[Auto]
Intel(R) SpeedStep Technology
[Automatic]
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
Ratio CMOS Setting [19]
Sets the ratio between the CPU Core Clock and the Front Side Bus
frequency. The default value of this item is auto-detected by BIOS. Use the
<+> or <-> keys to adjust the values.
You can only adjust the R a t i o C M O S setting if you installed an
unlocked CPU. Refer to the CPU documentation for details.
HyperThreading Function [Enabled]
Allows you to enable or disable the processor Hyper-Threading Technology.
Configuration options: [Disabled] [Enabled]
CPU Lock Free [Auto]
Allows you to adjust the CPU multiplier to 14x. Setting this item to [Auto]
allows the motherboard to automatically reduce the CPU multiplier value for
more flexibility when increasing the external FSB. This item appears only
when you install a processor that supports the Lock Free feature.
Configuration options: [Auto] [Disabled] [Enabled]
Microcode Updation [Enabled]
Enables or disables microcode updation.
Configuration options: [Disabled] [Enabled]
4-24
Chapter 4: BIOS setup
Max CPUID Value Limit [Disabled]
Enable this item to boot legacy operating systems that cannot support
CPUs with extended CPUID functions. Configuration options: [Disabled]
[Enabled]
Enhanced C1 Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU’s capability
to enable the C1E support. In C1E mode, the CPU power consumption is
lower when idle. Configuration options: [Auto] [Disabled]
CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Configuration options: [Auto] [Disabled]
The following item appears only when you installed an Intel® Pentium® 4
CPU that supports the Enhanced Intel SpeedStep® Technology (EIST).
Intel(R) SpeedStep Technology [Automatic]
Allows you to use the Enhanced Intel SpeedStep® Technology. When set to
[Automatic], you can adjust the system power settings in the operating
system to use the EIST feature.
Set this item to [Maximum] or [Disabled] if you do not want to use the EIST.
The CPU constantly operates at a lower internal frequency when you set
this item to [Minimum]. Configuration options: [Maximum] [Minimum]
[Automatic] [Disabled]
•
Refer to the Appendix for details on how to use the EIST feature.
•
The motherboard comes with a BIOS file that supports EIST.
ASUS P5RD1-V Deluxe
4-25
4.4.5
Chipset
The Chipset menu allows you to change the advanced chipset settings.
Select an item then press <Enter> to display the sub-menu.
NorthBridge Configuration
SouthBridge Configuration
Options for NB
Northbridge Configuration
Memory Reference Code (MRC) Version 3.2
Boot Graphic Adapter Priority
[PEG/IGD]
Current Memory Clock
400MHz
Surround View Function
[Disabled]
UMA Frame Buffer Size
[64MB]
Advanced NB
Video Display Devices
TV Standard
[Auto]
[NTSC]
Boot Graphic Adapter Priority [PEG/IGD]
Allows selection of the graphics controller to use as a primary boot
device. Configuration options: [IGD] [PEG/IGD]* [PCI/IGD]
* P E G - PCI Express VGA card
I G D - Integrated graphics display
UMA Frame Buffer Size [64MB]
Allows you to set the UMA frame buffer size.
Configuration options: [32MB] [64MB] [128MB]
4-26
Chapter 4: BIOS setup
Advanced NB
DRAM IT/2T Command
Configure DRAM Timing by SPD
DRAM CAS Select
DRAM tRP Select
DRAM tRCD Select
DRAM tRAS Select
Refresh Rate Select
[2T]
[Enabled]
[3.0 Clocks]
[3.0 Clocks]
[3.0 Clocks]
[8.0 Clocks]
[7.8 us]
Address would be
available 2 clocks
before command.
0 - Disable
1 - Enable
DRAM IT/2T Command [2T]
Sets the DRAM timing. Configuration options: [1T] [2T]
Configure DRAM Timing by SPD [Enabled]
When this item is Enabled, the DRAM timing parameters are set
according to the DRAM SPD (Serial Presence Detect). When
disabled, you can manually set the DRAM timing parameters through
the DRAM sub-items.
The following items become user-configurable when this item is
Disabled.
DRAM CAS Select [3.0 Clocks]
Sets the latency (in clocks) between the DRAM read command and
the time the data actually becomes available.
Configuration options: [1.0 Clock] [1.5 Clock] [2.0 Clocks]
[2.5 Clocks] [3.0 Clocks] [3.5 Clocks]
DRAM tRP Select. [3.0 Clocks]
Configuration options: [2.0 Clocks] [3.0 Clocks] [4.0 Clocks]
[5.0 Clocks]
DRAM tRCD Select. [3.0 Clocks]
Configuration options: [2.0 Clocks] [3.0 Clocks] [4.0 Clocks]
DRAM tRAS Select
[8.0 Clocks]
Configuration options: [2.0 Clocks] ~ [15.0 Clocks]
Refresh Rate Select [7.8 us]
Configuration options: [15.625 us] [3.9 us] [7.8 us] [31.3 us]
[62.5 us] [125 us]
ASUS P5RD1-V Deluxe
4-27
Video Display Devices [Auto]
Allows you to select the video display device.
Configuration options: [Auto] [CRT only] [TV only]
TV Standard [NTSC]
Allows you to select the TV standard in your area.
Configuration options: [NTSC] [PAL]
Southbridge Configuration
AC97 & Azalia Link A
Serial ATA Controller
Onboard SATA Boot ROM
[Azalia Only]
[Enabled]
[Enabled]
T1 1394 Controller
Onboard LAN
Onboard LAN Boot ROM
Philips TV Tuner
[Enabled]
[Enabled]
[Disabled]
[Enabled]
AC97 & Azalia Link A [Azalia Only]
Keep the default setting [Azalia Only] to enable support for high
definition audio. Set to [Disabled] to enable support for legacy AC’97
audio. Configuration options: [Disabled] [Azalia Only]
SATA Controller [Enabled]
Allows you to enable or disable the onboard Serial ATA controller.
Configuration options: [Disabled] [Enabled]
Onboard SATA Boot ROM [Enabled]
Allows you to enable or disable the onboard SATA boot ROM.
Configuration options: [Disabled] [Enabled]
If this item is set to [Disabled], the T h i r d I D E M a s t e r , F o u r t h I D E
M a s t e r , F i f t h I D E M a s t e r , a n d S i x t h I D E M a s t e r items will
appear on the Main Menu.
T1 1394 Controller [Enabled]
Allows you to enable or disable the onboard IEEE 1394a controller.
Configuration options: [Disabled] [Enabled]
OnBoard LAN [Enabled]
Allows you to enable or disable the onboard PCI Express Gigabit LAN
controller. Configuration options: [Enabled] [Disabled]
4-28
Chapter 4: BIOS setup
OnBoard LAN Boot ROM [Disabled]
Allows you to enable or disable the onboard LAN boot ROM.
Configuration options: [Disabled] [Enabled]
Philips TV Tuner [Enabled]
Allows you to enable or disable the Philips TV tuner.
Configuration options: [Enabled] [Disabled]
4.4.6
Onboard Devices Configuration
Configure ITE8712 Super IO Chipset
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
EPP Version
Parallel Port IRQ
Onboard Game Port
Onboard MIDI Port
MIDI IRQ Select
[3F8/IRQ4]
[378]
[ECP]
[1.9]
[IRQ7]
[Enabled]
[330]
[IRQ5]
Enable or disable the
Azalia controller.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Configuration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [EPP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [EPP] [ECP] [ECP+EPP]
EPP Version [1.9]
Allows you to select the parallel port EPP version. This item becomes
configurable only if the P a r a l l e l P o r t M o d e is set to [EPP] or
[ECP+EPP]. Configuration options: [1.9] [1.7]
ASUS P5RD1-V Deluxe
4-29
The following item appeasr only when the P a r a l l e l M o d e item is set to
[ECP] or [ECP+EPP].
ECP Mode DMA Channel [DMA3]
Allows you to select the ECP mode DMA channel.
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ
Allows you to select the parallel port IRQ.
Configuration options: [IRQ5] [IRQ7]
Onboard Game Port [Enabled]
Allows you to enable or disable the Game port.
Configuration options: [Disabled] [Enabled]
Onboard Midi Port [330]
Allows you to select the MIDI port address or to disable the port.
Configuration options: [Disabled] [330] [300]
Midi Port IRQ Select [IRQ5]
Allows you to set the Midi port IRQ address. This item becomes
configurable only if the M i d i P o r t A d d r e s s item is set to [300] or [330]
Configuration options: [IRQ5] [IRQ7] [IRQ10] [IRQ11]
4-30
Chapter 4: BIOS setup
4.4.7
PCI PnP
The PCI PnP menu items allow you to change the advanced settings for
PCI/PnP devices. The menu includes setting IRQ and DMA channel resources
for either PCI/PnP or legacy ISA devices, and setting the memory size block
for legacy ISA devices.
Take caution when changing the settings of the PCI PnP menu items.
Incorrect field values can cause the system to malfunction.
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
[No]
[64]
[Yes]
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
[PCI
[PCI
[PCI
[PCI
[PCI
[PCI
[PCI
[PCI
[PCI
Device]
Device]
Device]
Device]
Device]
Device]
Device]
Device]
Device]
No: Lets the BIOS
configure all the
devices in the system.
Yes: Lets the operating
system configure Plug
and Play (PnP) devices
not required for boot
if your system has a
Plug and Play operating
system.
Plug and Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
PCI Latency Timer [64]
Allows you to select the value in units of PCI clocks for the PCI device
latency timer register. Configuration options: [32] [64] [96] [128] [160]
[192] [224] [248]
Allocate IRQ to PCI VGA [Yes]
When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card
requests for an IRQ. When set to [No], BIOS does not assign an IRQ to the
PCI VGA card even if requested. Configuration options: [Yes] [No]
IRQ-xx assigned to [PCI Device]
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
ASUS P5RD1-V Deluxe
4-31
4.5
Power menu
The Power menu items allow you to change the settings for the ACPI and
Advanced Power Management (APM). Select an item then press <Enter> to
display the configuration options.
Suspend Mode
Repost Video on S3 Resume
ACPI 2.0 Support
ACPI APIC Support
[Auto]
[No]
[No]
[Enabled]
Select the ACPI state
used for System
Suspend.
APM Configuration
Hardware Monitor
4.5.1
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface
(ACPI) state to be used for system suspend.
Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
4.5.2
Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [No] [Yes]
4.5.3
ACPI 2.0 Support [No]
Allows you to add more tables for Advanced Configuration and Power
Interface (ACPI) 2.0 specifications. Configuration options: [No] [Yes]
4.5.4
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt
Controller (APIC). When set to Enabled, the ACPI APIC table pointer is
included in the RSDT pointer list. Configuration options: [Disabled]
[Enabled]
4-32
Chapter 4: BIOS setup
4.5.5
APM Configuration
APM Configuration
Power Button Mode
[On/Off]
Restore on AC Power Loss
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Power On By RTC Alarm
Power On By External Modems
Power On By PCI Devices
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Go into On/Off or
Suspend when Power
button is pressed.
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values. Configuration
options: [Disabled] [Enabled]
ASUS P5RD1-V Deluxe
4-33
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system on.
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
4-34
Chapter 4: BIOS setup
4.5.6
Hardware Monitor
Hardware Monitor
CPU Temperature
MB Temperature
CPU Temperature
[41ºC/105.5ºF]
[51ºC/122.5ºF]
CPU Fan Speed
Chassis Fan Speed
Power Fan Speed
[3813 RPM]
[N/A]
[N/A]
VCORE Voltage
3.3V Voltage
5V Voltage
12V Voltage
[ 1.320V]
[ 3.345V]
[ 5.094V]
[11.880V]
Q-Fan Support
[Disabled]
MB Temperature [xxxºC/xxxºF]
CPU Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the
motherboard and CPU temperatures. Select Disabled if you do not wish to
display the detected temperatures.
CPU Fan Speed [xxxxRPM] or [N/A]
The onboard hardware monitor automatically detects and displays the CPU
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A.
Chassis Fan Speed [Ignored] or [N/A]
The onboard hardware monitor automatically detects and displays the
chassis fan speed in rotations per minute (RPM). If the fan is not connected
to the chassis, the specific field shows N/A.
Power Fan Speed [Ignored] or [N/A]
The onboard hardware monitor automatically detects and displays the
power fan speed in rotations per minute (RPM). If the fan is not connected
to the power fan connector, the specific field shows N/A.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output
through the onboard voltage regulators.
Q-Fan Support [Disabled]
Allows you to enable or disable the ASUS Q-Fan feature that smartly
adjusts the fan speeds for more efficient system operation.
Configuration options: [Disabled] [Enabled]
ASUS P5RD1-V Deluxe
4-35
4.6
Boot menu
The Boot menu items allow you to change the system boot options. Select
an item then press <Enter> to display the sub-menu.
Boot Settings
Specifies the Boot
Device Boot Priority
sequence.
Boot Device Priority
Boot Settings Configuration
Security
4.6.1
Boot Device Priority
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
[1st FLOPPY DRIVE]
[PM-ST330620A]
[PS-Pioneer CD-ROM]
Specifies the boot
sequence from the
availabe devices.
1st ~ xxth Boot Device [1st Floppy Drive]
These items specify the boot device priority sequence from the available
devices. The number of device items that appears on the screen depends
on the number of devices installed in the system.
Configuration options: [xxxxx Drive] [Disabled]
4-36
Chapter 4: BIOS setup
4.6.2
Boot Settings Configuration
Boot Settings Configuration
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
PS/2 Mouse Support
Wait For ‘F1’ If Error
Hit ‘DEL’ Message Display
Interrupt 19 Capture
[Enabled]
[Enabled]
[Force BIOS]
[On]
[Auto]
[Enabled]
[Enabled]
[Disabled]
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]
Full Screen Logo [Enabled]
This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo™ feature.
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse.
Configuration options: [Disabled] [Enabled] [Auto]
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when
error occurs. Configuration options: [Disabled] [Enabled]
ASUS P5RD1-V Deluxe
4-37
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run
Setup” during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Configuration options: [Disabled] [Enabled]
4.6.3
Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
Security Settings
Supervisor Password
User Password
: Not Installed
: Not Installed
<Enter> to change
password.
<Enter> again to
disabled password.
Change Supervisor Password
Boot Sector Virus Protection
[Disabled]
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default N o t I n s t a l l e d
d.
After you set a password, this item shows I n s t a l l e d
d.
To set a Supervisor Password:
1.
Select the Change Supervisor Password item and press <Enter>.
2.
From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3.
Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password, select the Change Supervisor Password
then press <Enter>. The message “Password Uninstalled” appears.
4-38
Chapter 4: BIOS setup
If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. See section “2.6 Jumpers” for information
on how to erase the RTC RAM.
After you have set a supervisor password, the other items appear to allow
you to change other security settings.
Security Settings
Supervisor Password
User Password
: Not Installed
: Not Installed
Change Supervisor Password
User Access Level
Change User Password
Clear User Password
Password Check
Boot Sector Virus Protection
<Enter> to change
password.
<Enter> again to
disabled password.
[Full Access]
[Setup]
[Disabled]
User Access Level (Full Access]
This item allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
N o A c c e s s prevents user access to the Setup utility.
V i e w O n l y allows access but does not allow change to any field.
L i m i t e d allows changes only to selected fields, such as Date and
Time.
F u l l A c c e s s allows viewing and changing all the fields in the Setup
utility.
Change User Password
Select this item to set or change the user password. The User Password
item on top of the screen shows the default N o t I n s t a l l e d
d. After you set
a password, this item shows I n s t a l l e d
d.
To set a User Password:
1.
Select the Change User Password item and press <Enter>.
2.
On the password box that appears, type a password composed of at
least six letters and/or numbers, then press <Enter>.
3.
Confirm the password when prompted.
ASUS P5RD1-V Deluxe
4-39
The message “Password Installed” appears after you set your password
successfully.
To change the user password, follow the same steps as in setting a user
password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the
Setup utility. When set to [Always], BIOS checks for user password both
when accessing Setup and booting the system.
Configuration options: [Setup] [Always]
Boot Sector Virus Protection [Disabled]
Allows you to enable or disable the boot sector virus protection.
Configuration options: [Disabled] [Enabled]
4.7
Exit menu
The Exit menu items allow you to load the optimal or failsafe default values
for the BIOS items, and save or discard your changes to the BIOS items.
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Load Setup Defaults
Pressing <Esc> does not immediately exit this menu. Select one of the
options from this menu or <F10> from the legend bar to exit.
4-40
Chapter 4: BIOS setup
Exit & Save Changes
Once you are finished making your selections, choose this option from the
Exit menu to ensure the values you selected are saved to the CMOS RAM.
An onboard backup battery sustains the CMOS RAM so it stays on even
when the PC is turned off. When you select this option, a confirmation
window appears. Select Y e s to save changes and exit.
If you attempt to exit the Setup program without saving your changes,
the program prompts you with a message asking if you want to save
your changes before exiting. Press <Enter> to save the changes while
exiting.
Exit & Discard Changes
Select this option only if you do not want to save the changes that you
made to the Setup program. If you made changes to fields other than
System Date, System Time, and Password, the BIOS asks for a confirmation
before exiting.
Discard Changes
This option allows you to discard the selections you made and restore the
previously saved values. After selecting this option, a confirmation appears.
Select Y e s to discard any changes and load the previously saved values.
Load Setup Defaults
This option allows you to load the default values for each of the
parameters on the Setup menus. When you select this option or if you
press <F5>, a confirmation window appears. Select Y e s to load default
values. Select E x i t & S a v e C h a n g e s or make other changes before
saving the values to the non-volatile RAM.
ASUS P5RD1-V Deluxe
4-41
4-42
Chapter 4: BIOS setup
This chapter describes the contents
of the support CD that comes with
the motherboard package.
5
Software
support
Chapter summary
5
5.1
Installing an operating system ............................................. 5-1
5.2
Support CD information ........................................................ 5-1
5.3
Software information ........................................................... 5-7
5.5
Uninstalling the TV tuner driver ......................................... 5-16
5.4
Installing the TV tuner driver ............................................. 5-16
5.5
ASUS Home Theater ........................................................... 5-17
5.6
RAID configurations ............................................................ 5-35
5.7
Creating a RAID driver disk ................................................. 5-42
ASUS P5RD1-V Deluxe
5.1
Installing an operating system
This motherboard supports Windows® 2000/XP operating systems (OS).
Always install the latest OS version and corresponding updates to maximize
the features of your hardware.
5.2
•
Motherboard settings and hardware options vary. Use the setup
procedures presented in this chapter for reference only. Refer to
your OS documentation for detailed information.
•
Make sure that you install Windows® 2000 Service Pack 4 or the
Windows® XP Service Pack 1 or later versions before installing the
drivers for better compatibility and system stability.
Support CD information
The support CD that came with the motherboard package contains the
drivers, software applications, and utilities that you can install to avail all
motherboard features.
The contents of the support CD are subject to change at any time
without notice. Visit the ASUS website(www.asus.com) for updates.
5.2.1
Running the support CD
Place the support CD to the optical drive. The CD automatically displays the
D r i v e r s menu if Autorun is enabled in your computer.
Click an icon to
display support
CD/motherboard
information
Click an item to install
If A u t o r u n is NOT enabled in your computer, browse the contents of
the support CD to locate the file ASSETUP.EXE from the BIN folder.
Double-click the A S S E T U P . E X E to run the CD.
ASUS P5RD1-V Deluxe
5-1
5.2.2
Drivers menu
The drivers menu shows the available device drivers if the system detects
installed devices. Install the necessary drivers to activate the devices.
ATI Radeon® XPress 200 Chipset Driver
Installs the ATI Radeon® XPress 200 chipset driver.
ULi Chipset Driver
Installs the ULi chipset driver.
Make ULi Chipset Driver Disk
Allows you to create the ULI chipset driver disk for Serial ATA and RAID
features.
Marvell Yukon Gigabit Driver
Installs the driver for the Marvell® Yukon™ 88E8001 PCI Express Gigabit LAN .
Realtek Audio Driver
Allows you to install the Realtek ALC861 driver.
TV Tuner Driver
Installs the TV tuner driver to allow you to watch television on your
computer.
USB 2.0 Driver
Installs the USB 2.0 driver.
The screen display and drivers options may not be the same for different
operating system versions.
5-2
Chapter 5: Software support
5.2.3
Utilities menu
The Utilities menu shows the applications and other software that the
motherboard supports.
Marvell Yukon VCT Application
The Virtual Cable Tester (VCT) is a cable diagnostic application that
analyzes and reports LAN cable faults and shorts. See page 5-9 for details.
ASUS PC Probe
This smart utility monitors the fan speed, CPU temperature, and system
voltages, and alerts you of any detected problems. This utility helps you
keep your computer in healthy operating condition.
ASUS Update
The ASUS Update utility that allows you to update the motherboard BIOS in
Windows® environment. This utility requires an Internet connection either
through a network or an Internet Service Provider (ISP). See section “4.1.5
ASUS Update utility” for details.
Before using the ASUS Update, make sure that you have an Internet
connection so you can connect to the ASUS website.
ASUS P5RD1-V Deluxe
5-3
A S U S AI Booster
The ASUS AI Booster application allows you to overclock the CPU speed in
Windows® environment.
Microsoft DirectX 9.0 Driver
Installs the Microsoft® DirectX 9.0 driver.
Anti-virus utility
The anti-virus application scans, identifies, and removes computer viruses.
View the online help for detailed information.
ASUS Home Theater
The ASUS Home Theater allows you to maximize the multimedia functions
of the motherboard, letting you watch and record live TV, play DVD/VCD
movies, view video clips, and listen to audio files.
ADOBE Acrobat Reader
Installs the Adobe® Acrobat® Reader V5.0 that allows you to open, view,
and print documents in Portable Document Format (PDF).
ASUS Screen Saver
Installs the ASUS screen saver.
ASUS Video Security
Installs the ASUS Video Security software that offers motion detection
security.
The screen display and utilities option may not be the same for different
operating system versions.
5-4
Chapter 5: Software support
5.2.4
ASUS Contact information
Click the C o n t a c t tab to display the ASUS contact information. You can
also find this information on the inside front cover of this user guide.
5.2.5
Other information
The icons on the top right corner of the screen give additional information
on the motherboard and the contents of the support CD. Click an icon to
display the specified information.
Motherboard Info
Displays the general specifications of the motherboard.
ASUS P5RD1-V Deluxe
5-5
Browse this CD
Displays the support CD contents in graphical format.
Technical support Form
Displays the ASUS Technical Support Request Form that you have to fill out
when requesting technical support.
Filelist
Displays the contents of the support CD and a brief description of each in
text format.
5-6
Chapter 5: Software support
5.3
Software information
Most of the applications in the support CD have wizards that will
conveniently guide you through the installation. View the online help or
readme file that came with the software application for more information.
5.3.1
ASUS MyLogo2™
The ASUS MyLogo2™ utility lets you customize the boot logo. The boot
logo is the image that appears on screen during the Power-On-Self-Tests
(POST). The ASUS MyLogo2™ is automatically installed when you install the
A S U S U p d a t e utility from the support CD. See section “5.2.3 Utilities
menu” for details.
•
Before using the ASUS MyLogo2™, use the AFUDOS utility to make a
copy of your original BIOS file, or obtain the latest BIOS version from
the ASUS website. See section “4.1.2 AFUDOS Utility.”
•
Make sure that the BIOS item F u l l S c r e e n L o g o is set to
[Enabled] if you wish to use ASUS MyLogo2. See section “4.6.2
Boot Settings Configuration.”
•
You can create your own boot logo image in GIF, JPG, or BMP file
formats.
To launch the ASUS MyLogo2™:
1.
2.
3.
4.
5.
6.
Launch the ASUS Update utility. Refer to section “4.1.4 ASUS Update
utility” for details.
Select O p t i o n s from the drop down menu, then click N e x tt.
Check the option L a u n c h M y L o g o t o r e p l a c e s y s t e m b o o t
logo before flashing BIOS
S, then click N e x tt.
Select U p d a t e B I O S f r o m a f i l e from the drop down menu, then
click N e x tt.
When prompted, locate the new
BIOS file, then click N e x tt. The
ASUS MyLogo2 window appears.
From the left window pane, select
the folder that contains the image
you intend to use as your boot
logo.
ASUS P5RD1-V Deluxe
5-7
7.
When the logo images appear on
the right window pane, select an
image to enlarge by clicking on it.
8.
Adjust the boot image to your
desired size by selecting a value
on the R a t i o box.
9.
When the screen returns to the ASUS Update utility, flash the original
BIOS to load the new boot logo.
10. After flashing the BIOS, restart the computer to display the new boot
logo during POST.
5-8
Chapter 5: Software support
5.3.2
AI NET2
The AI NET2 features the Marvell® Virtual Cable Tester™ (VCT). VCT is a
cable diagnostic utility that reports LAN cable faults and shorts using the
Time Domain Reflectometry (TDR) technology. The VCT detects and
reports open and shorted cables, impedance mismatches, pair swaps, pair
polarity problems, and pair skew problems of up to 64 ns at one meter
accuracy.
The VCT feature reduces networking and support costs through a highly
manageable and controlled network system. This utility can be incorporated
in the network systems sofware for ideal field support as well as
development diagnostics.
Using the Virtual Cable Tester™
To use the the Marvell® Virtual Cable Tester™ utility:
1.
2.
3.
Launch the VCT utility from the Windows® desktop by clicking
S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e rr.
Click V i r t u a l C a b l e T e s t e r from the menu to display the screen
below.
Click the R u n button to perform a cable test.
•
The VCT only runs on systems with Windows® XP or Windows® 2000
operating systems.
•
The VCT utility only tests Ethernet cables connected to Gigabit LAN
port(s).
•
The R u n button on the Virtual Cable Tester™ main window is
disabled if no problem is detected on the LAN cable(s) connected to
the LAN port(s).
•
If you want the system to check the status of the LAN cable before
entering the OS, enable the item P o s t C h e c k L A N C a b l e in the
BIOS Setup.
ASUS P5RD1-V Deluxe
5-9
5.3.3
Audio configurations
The Realtek® ALC861 AC ‘97 audio CODEC provides 8-channel audio
capability to deliver the ultimate audio experience on your PC. The software
provides Jack-Sensing function (Line-In, Line-Out, Mic-In), S/PDIF out
support and interrupt capability. The ALC850 also includes the Realtek®
proprietary UAJ® (Universal Audio Jack) technology for three ports (Line-In,
Line-Out and Mic-In), eliminating cable connection errors and giving users
plug and play convenience.
Follow the installation wizard to install the R e a l t e k A L C 8 6 1 A u d i o
D r i v e r a n d A p p l i c a t i o n from the support CD that came with the
motherboard package.
If the Realtek audio software is correctly installed, you will find the
SoundEffect icon on the taskbar.
From the taskbar, double-click on the
S o u n d E f f e c t icon to display the
R e a l t e k A u d i o C o n t r o l P a n e ll.
Realtek SoundEffect icon
The Jack-sensing and UAJ® technology features are supported on the
Line-In, Line-Out, and Mic jacks only.
Sound Effect options
The Realtek® ALC861 Audio CODEC allows you to set your listening
environment, adjust the equalizer, set the karaoke, or select
pre-programmed equalizer settings for your listening pleasure.
5-10
Chapter 5: Software support
To set the sound effect options:
1.
From the Realtek Audio Control Panel, click the S o u n d E f f e c t
button.
2.
Click the shortcut buttons to change the acoustic environment, adjust
the equalizer, or set the karaoke to your desired settings.
3.
The audio settings take effect immediately after you click on the
buttons.
Click the Exit (X
X ) button on the upper-right hand corner of the window
to exit.
4.
S/PDIF options
The Sony/Philips Digital Interface (S/PDIF) options allows you to change
your S/PDIF output settings.
To set the S/PDIF options:
1.
From the Realtek Audio Control Panel, click the S P D I F button.
2.
Click the option buttons to change your S/PDIF out settings.
Click the Exit (X
X ) button on the upper-right hand corner of the window
to exit.
3.
ASUS P5RD1-V Deluxe
5-11
Speaker Configuration
This option allows you to set your speaker configuration.
To set the speaker configuration:
1.
2.
3.
4.
5-12
From the Realtek Audio Control Panel, click the S p e a k e r
C o n f i g u r a t i o n button.
Select from the combo list box your current speaker setup, then click
A u t o T e s t to test your settings.
Click the U A J A u t o m a t i c button to enable or disable the Universal
Audio Jack(UAJ®) technology feature.
Click the Exit (X
X ) button on the upper-right hand corner of the window
to exit.
Chapter 5: Software support
AI Audio feature
The AI Audio feature works through the connector sensing option that
allows you to check if your audio devices are connected properly.
To start the connector sensing:
1.
2.
3.
4.
From the Realtek Audio Control Panel, click the C o n n e c t o r S e n s i n g
button.
Click the B r a c k e t button to display connected audio devices.
Click the O p t i o n button to change sensing options.
Click the S t a r t button to start connection sensing. A progress bar
displays current connector sensing status.
Make sure to exit all audio applications before starting this function.
5.
When finished, the utility prompts the Realtek® EZ-connection dialog
box showing your current audio connections. The text at the bottom
of the box explains your audio connection status. An X mark denotes
an incorrect connection.
ASUS P5RD1-V Deluxe
5-13
6.
7.
8.
If there are detected problems, make sure that your audio cables are
connected to the proper audio jack and repeat connector sensing.
Click the X button to exit EZ-connection dialog box.
X ) button on the upper-right hand corner of the window
Click the Exit (X
to exit audio control panel.
HRTF Demo
This option shows a demo of the Head-Related Transfer Functions (HRTF).
To start the HRTF demo:
1.
2.
3.
4.
5-14
From the Realtek Audio Control Panel, click the H R T F D e m o button.
Click the option buttons to change the sound, moving path or EAX
settings.
Click the P l a y button to start or the S t o p button to stop.
X ) button on the upper-right hand corner of the window
Click the Exit (X
to exit.
Chapter 5: Software support
General settings
This option shows the audio settings and allows you to change the
language setting or toggle the SoundEffect icon display on the Windows
taskbar.
To display the general settings:
1.
From the Realtek Audio Control Panel, click the G e n e r a l button.
2.
Click the option button to enable or disable the icon display on the
Windows taskbar.
Click the L a n g u a g e combo list box to change language display.
3.
4.
X ) button on the upper-right hand corner of the window
Click the Exit (X
to exit.
Rear panel audio ports function variation
The functions of the Line Out (lime), Line In (blue), Mic (pink), Center/
Subwoofer (Yellow Orange), Rear Speaker Out (Black), and Side Speaker
Out (Gray) ports on the rear panel change when you select the 4-channel,
6-channel or 8-channel audio configuration as shown in the following table.
Audio 2, 4, 6, or 8-channel configuration
Port
Headset
2-channel
4-channel
Line In
Line In
Line In
Line In
Lime
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink
Mic In
Mic In
Mic In
Mic In
Gray
-
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Black
-
-
-
Side Speaker Out
Yellow Orange
-
-
Center/Subwoofer
Center/Subwoofer
Light Blue
ASUS P5RD1-V Deluxe
6-channel
8-channel
5-15
5.4
Installing the TV tuner driver
You need to install the TV tuner driver to your computer so you can
use the TV feature of the motherboard.
To install the TV tuner driver:
1.
Turn on your computer.
2.
Place the support CD in your optical drive.
3.
On the Drivers menu, click on the T V T u n e r D r i v e r item to
begin automatic installation.
5.5
Uninstalling the TV tuner driver
To uninstall the TV tuner driver from your computer:
1.
2.
Turn on your computer.
Press S t a r t on the Windows® task bar. Go to Settings > Control
Panel > Add or Remove Programs.
3.
Select TV Tuner Driver, then click the Remove button.
5-16
Chapter 5: Software support
5.5
ASUS Home Theater
The ASUS Home Theater maximizes the multimedia features of the
motherboard. The following sections provide information on installing and
using the ASUS Home Theater.
5.5.1
Installing ASUS Home Theater
To install ASUS Home Theater:
1.
Place the support CD in the optical drive.
2.
Click the Utilities menu tab.
Click on the A S U S H o m e
T h e a t e r item to begin
installation.
3.
4.
The initial installation window
appears. Click N e x tt.
5.
Read the License Agreement,
then click Y e ss.
ASUS P5RD1-V Deluxe
5-17
6.
Select the destination location
where you want to install the
files. The default is
Intervideo\Home
T h e a t e r . Click N e x tt.
7.
When prompted, select the
program folder where you
want to save the ASUS Home
Theater program icons.
Click N e x tt.
8.
The Home Theater application
is copied into your system.
The S e t u p S t a t u s window
appears, indicating the
progress of the installation.
5-18
Chapter 5: Software support
9.
The F i l e T y p e s
A s s o c i a t i o n window
appears. Select the media files
for which you want Home
Theater to be the default
player.
10. The S e t u p C o m p l e t e
window appears, indicating
that Home Theater has been
installed.
Click Y e s to restart your
computer now or N o to
restart later.
Click F i n i s h
h.
ASUS P5RD1-V Deluxe
5-19
5.5.2
Launching ASUS Home Theater
To launch the ASUS Home Theater:
1.
2.
3.
4.
5.
Turn on your computer.
Click S t a r t > A l l P r o g r a m s
> Intervideo Home
Theater > Intervideo
H o m e T h e a t e rr. Or,
double-click the H o m e
T h e a t e r shortcut on your
desktop.
The S e t u p window appears
when you launch the ASUS
Home Theater for the first
time.
Click S t a r t to begin
configuring the settings.
The G e n e r a l S e t t i n g s
window appears. Make your
desired settings by clicking
N o button, or the
the Y e ss/N
< />
> button for more
options.
Click N e x t configure the
TV Settings, Picture
S e t t i n g s , and D V D
S e t t i n g ss.
Click C l o s e if you want to
configure these items later.
See section “5.5.5 Setup” for detailed information on setting up
Home Theater.
5-20
Chapter 5: Software support
5.5.3
Using ASUS Home Theater
The ASUS Home Theater features a user-friendly interface that integrates
all the multimedia functions of the TV/FM card. This application lets you
watch TV, play a DVD/VCD movie, browse pictures, watch video clips,
listen to audio files, or tune in to an FM radio station in a single interface.
This flexibility allows you to switch from one entertainment mode to
another without having to launch several multimedia applications.
Home Theater Main Window
Entertainment
mode bars
User
account
name
Setup
button
E n t e r t a i n m e n t m o d e b u t t o n s - Click on a bar to launch an
entertainment mode.
S e t u p - Click this bar to display the setup window.
Computer account name
e- Displays the user currently using
the application.
ASUS P5RD1-V Deluxe
5-21
The control panel and window control buttons
Each Home Theater window is equipped with a control panel to control the
entertainment modes. The control panel buttons and functions are illustrated
below.
Window
control
buttons
Window
control
buttons
Record
Mute
Stop
Volume
Rewind/Replay
Volume
Forward
Next
Pause
Previous
Play
Some control panel buttons change from one entertainment mode to
another.
W i n d o w c o n t r o l b u t t o n s - Controls the Home Theater window.
to return to the Home Theater main window.
Click
Click
to return to the previous window.
Click
to return to open the Help window.
Click
to minimize the window.
Click
to return the window to its previous size or to maximize
the window.
Click
5-22
to exit Home Theater.
Chapter 5: Software support
5.5.4
Entertainment modes
You need to install the TV tuner driver to use all the entertainment
modes of Home Theater.
TV
Home Theater lets you watch TV
on your computer.
On initial use, the ASUS Home Theater instructs you to autoscan
available TV channels. Click the S e t t i n g s button, then click
A u t o s c a n to view the available channels. See “Settings” on page
5-26 for details.
Time Shifting feature
Home Theater comes with the T i m e s h i f t i n g feature that allows you to
take a break from the program you are watching, then replay the program
from where you left off, or jump back to live view.
To use Time Shifting:
1.
2.
3.
Click the P a u s e button on the Control Panel or press the S p a c e B a r
on your keyboard.
To replay the program from where you paused, click the P a u s e or
P l a y button, or press the S p a c e B a r on your keyboard.
To return to live TV, click the S t o p button on the Control Panel
When you use the T i m e S h i f t i n g feature, your system records the
live TV from where you clicked P a u s e and saves it temporarily in your
hard disc. The slide bar on the Control Panel indicates how much video
stream has been recorded.
ASUS P5RD1-V Deluxe
5-23
The TV window has seven sub-menus. Change the TV channel by clicking
button on the remote
the C h a n n e l buttons on the control panel or the
controller. Double-click the screen for full-screen viewing.
Guide
Click the G u i d e bar to open the
TitanTV website. TitanTV is an
Electronic Program Guide (EPG)
that allows users to record and
watch TV right from the guide. Visit
the Titan TV website for details.
Channel
buttons
Closed Caption/TeleText
The C l o s e d C a p t i o n option is available only in the United States. This
feature provides subtitles, if available. T e l e T e x t is available only in
Europe. This is a service that provides additional information such as
weather or program schedule, if available.
Schedule
The S c h e d u l e option allows you to set a schedule to record a TV
program.
Home Theater automatically saves a recorded program in the
Windows® M y V i d e o s folder. Home Theater records TV programs in
InterVideo Media File format.
To create a recording schedule:
1.
2.
5-24
Click the S c h e d u l e bar on
the T V menu. The S c h e d u l e
window opens.
Click the A d d bar.
Chapter 5: Software support
3.
Key-in the program name.
4.
Select the Channel Frequency,
Start Date, Start Hour, Start
Minute, Duration, and Record
> buttons
Quality using the < />
Click F i n i s h when done.
5.
The TV recording feature requires a higher capacity HDD if you
save a recorded program in high quality.
Channel Surfing
To surf for available channels in
your location:
1.
Click the C h a n n e l S u r f i n g
bar.
2.
Multiple channel previews
appear on screen .
3.
Double-click a channel to
display.
ASUS P5RD1-V Deluxe
5-25
Recorded TV
The R e c o r d e d T V option lets
you view, play, and organize
recorded TV programs.
Organize your recorded
programs by clicking the S o r t
By Name
D a t e bars.
e/D
Double-click a thumbnail to
preview a recorded program. A
window displays a snapshot of
each recorded program.
Double-click the snapshot to
start playing in full-screen view.
Preview window
Home Theater automatically saves a recorded program in the
Windows® M y V i d e o s folder. Home Theater records TV programs in
InterVideo Media File format.
Take a Snapshot
Home Theater allows you to take a still photo from live TV or a recorded
program.
Click the T a k e a S n a p s h o t bar to take a still photo.
View a Snapshot
Click the V i e w S n a p s h o t s bar to view the photo.
Home Theater automatically saves snapshots in the Windows® M y
P i c t u r e s folder in bitmap (*.bmp) format.
Settings
To change the TV settings:
1.
Click the S e t t i n g s bar.
2.
Select the TV source (Cable/Antenna), input source (TV/ S-Video/
Composite), record quality (Good/Better/Best), and TV Audio
> buttons to view available options.
(Stereo/Mono/SAP). Click the < />
3.
Click
5-26
to return to the TV main window.
Chapter 5: Software support
DVD/VCD
Watch a movie with the ASUS
Home Theater DVD/VCD player.
Place a DVD/VCD in the optical
drive, then click the P l a y button
on the control panel. Double-click
the screen for full-screen viewing.
The bars in the DVD/VCD menu are enabled only when a
DVD/VCD is inserted to the optical drive.
Menu
Click the M e n u bar to return to the
DVD main menu.
Audio
Displays your DVD audio language
setting.
Subtitle
Displays your subtitle language
setting.
Take a Snapshot
Home Theater allows you to take a
still photo from the DVD/VCD
movie you are playing.
Click the T a k e a S n a p s h o t bar to
take a still photo. Click the V i e w
S n a p s h o t to view the photo.
ASUS P5RD1-V Deluxe
5-27
•
Home Theater automatically saves snapshots in the Windows® M y
P i c t u r e s folder in bitmap (*.bmp) format.
•
This Home Theater version does not support Karaoke function.
Settings
Click S e t t i n g s to adjust the DVD/
VCD player properties.
A u d i o L a n g u a g e . Select the DVD
audio language. You may select an
audio language if the DVD supports
multilanguage audio.
S u b t i t l e L a n g u a g e . Allows you
to select an available DVD subtitle
language.
A u t o R e s u m e . Allows you to resume watching a movie from the
beginning or from where you stopped.
S o u r c e . Displays the video input source.
A u d i o o u t p u t . Allows you to set your audio output to analog or digital
(S/PDIF).
S p e a k e r c o n f i g u r a t i o n . Home Theater automatically detects and
displays your speaker configuration.
To change the DVD/VCD settings:
1.
Click the S e t t i n g s bar.
2.
> buttons to view
Make your desired settings by clicking the < />
available options.
3.
Click
5-28
to return to the TV main window.
Chapter 5: Software support
Pictures
The P i c t u r e s window lets you view
and print pictures saved in the
Windows® M y P i c t u r e s folder.
Double-click the thumbnails to view
the photos in full-screen view.
Slideshow
To create a slideshow:
1.
Click the S e t t i n g s bar.
2.
Adjust the slideshow
properties.
3.
to return to the
Click
Pictures window. To start the
slideshow, click the P l a y
button on the control panel.
Sort By Name
Allows you to sort your pictures
by name.
Sort By Date
Allows you to sort your pictures
by date.
Rotate Left
Allows you to rotate your pictures
counter-clockwise.
Rotate Right
Allows you to rotate your pictures
clockwise.
Other Media
Allows you to view and organize
photos stored in removable media
such as CDs, floppy disks, or flash
disks.
ASUS P5RD1-V Deluxe
Rotate left
Rotate right
Play slideshow
Previous
Next
5-29
Videos
View, play and organize your video
clips using the Videos window. The
Videos window displays the title
and length of video clips saved in
the Windows® M y V i d e o s folder.
The V i d e o C l i p s window only lists video clips saved in the Windows®
M y V i d e o s folder.
Sort By Name
Allows you to sort your video clips
by name.
Sort By Date
Allows you to sort your video clips
by date.
Other Media
Allows you to view and organize
video clips stored in removable
media such as CDs, floppy disks, or
flash disks.
Take a Snapshot
Home Theater allows you to take a still photo from live TV or a recorded
program.
Click the T a k e a S n a p s h o t bar to take a still photo.
View Snapshots
Click the V i e w S n a p s h o t s bar to view the photo.
Home Theater automatically saves snapshots in the Windows® M y
P i c t u r e s folder in bitmap (*.bmp) format.
5-30
Chapter 5: Software support
Music
Home Theater lets you play audio
CD/DVD tracks, MP3 files, and radio
recordings using the M u s i c
window.
Select M y M u s i c to view and play
audio files or radio recordings saved
to your hard disk drive. Click M y
M u s i c to display audio CD/DVD tracks. Control the audio playback using
the control panel buttons.The M u s i c window lists the title, album, artist,
and genre of available audio files.
Click the R e w i n d / R e p l a y or F o r w a r d button on the control panel to
change the media browser ambience.
Home Theater only lists
the MP3 files saved in the
Windows® M y M u s i c
folder.
Songs
Displays titles, file names, duration, and other relevant information of all
audio files saved in “My Music” folder.
Albums
Sorts all audio files saved in “My Music” folder according to Album title.
Artists
Sorts all audio files saved in “My Music” folder according to Artist name.
Genre
Sorts all audio files saved in “My Music” folder according to Genre.
ASUS P5RD1-V Deluxe
5-31
Go to Playlist
Allows you to view your Playlist.
Repeat
Allows you to play your selected music again and again.
Shuffle
Allows you to listen to your selected music in random order.
Add to Playlist
Allows you to add audio files to your Playlist.
Other Media
Displays the available removable media where audio files may be stored
(e.g., memory cards, CDs, etc.)
Update Music
Allows you to rescan your music files after you have modified them.
5-32
Chapter 5: Software support
5.5.5
Setup
The S e t u p button allows you to configure Home Theater and the
multimedia windows.
General Settings
This window lets you configure
general Home Theater settings.
Hide Date and Time
Allows you to display or hide the
date and time.
Music Visualization
Allows you to view music
visualization while playing music
files.
Run with Windows Start
Allows you to automatically launch Home Theater at the start of
Windows®.
Enable Animation
Allows you to enable or disable animation.
Control Panel Auto Hide
Allows you to specify within how many seconds the control panel
will hide itself.
Display Options
Allows you to choose Single Display or Multiple Displays.
TV settings
Use this window to adjust the
Home Theater TV properties.
TV Source
Source. Allows you to select
Cable or Antenna as the TV
signal source.
Input Source. Allows you to
select TV, S-Video, or
Composite as your input source.
Record Quality
Quality. Allows you to set
your recording quality to Good, Better, or Best.
o. Allows you to set your TV audio to Stereo or Mono.
TV Audio
Click N e x t to display the Picture settings window or C l o s e to
return to the main Home Theater window.
ASUS P5RD1-V Deluxe
5-33
DVD/VCD settings
Adjust the DVD/VCD player
settings on this window.
Click F i n i s h to return to the main
window.
You may also modify the Home Theater configuration in
Windows®. In the Windows® desktop, click S t a r t > A l l
Programs > Intervideo Home Theater > Intervideo
Home Theater Config
g. A C o n f i g u r a t i o n window
appears. Change the Home Theater configuration as desired.
Picture settings
Allows you to customize your
picture viewing and to setup a
slideshow.
Click N e x t to display the DVD
settings window or C l o s e to return
to the main window.
5-34
Chapter 5: Software support
5.6
RAID configurations
The motherboard comes with a RAID controller integrated in the ULI M1573
Southbridge that allows you to configure Serial ATA hard disk drives as
RAID sets. The motherboard supports the following RAID configurations.
R A I D 0 (Data striping) optimizes two identical hard disk drives to read and
write data in parallel, interleaved stacks. Two hard disks perform the same
work as a single drive but at a sustained data transfer rate, double that of
a single disk alone, thus improving data access and storage. Use of two
new identical hard disk drives is required for this setup.
R A I D 1 (Data mirroring) copies and maintains an identical image of data
from one drive to a second drive. If one drive fails, the disk array
management software directs all applications to the surviving drive as it
contains a complete copy of the data in the other drive. This RAID
configuration provides data protection and increases fault tolerance to the
entire system. Use two new drives or use an existing drive and a new drive
for this setup. The new drive must be of the same size or larger than the
existing drive.
R A I D 0 + 1 is data striping and data mirroring combined without parity
(redundancy data) having to be calculated and written. With the RAID 0+1
configuration you get all the benefits of both RAID 0 and RAID 1
configurations. Use four new hard disk drives or use an existing drive and
three new drives for this setup.
J B O D (Spanning) stands for J u s t a B u n c h o f D i s k s and refers to hard
disk drives that are not yet configured as a RAID set. This configuration
stores the same data redundantly on multiple disks that appear as a single
disk on the operating system. Spanning does not deliver any advantage
over using separate disks independently and does not provide fault
tolerance or other RAID performance benefits.
Due to chipset limitation, you cannot configure a RAID 0 /JBOD set
across more than two hard disk drives.
ASUS P5RD1-V Deluxe
5-35
5.6.1
Installing hard disks
The motherboard supports Ultra DMA 133/100/66 and Serial ATA hard
disk drives. For optimal performance, install identical drives of the same
model and capacity when creating a disk array.
Installing Parallel ATA hard disks
To install IDE hard disks for a RAID configuration:
1.
Set the jumpers of each hard disk as Master/Master or Slave/Slave.
2.
Install the hard disks into the drive bays.
3.
Connect the HDD signal cables.
4.
Connect a 4-pin power cable to the power connector on each drive.
Installing Serial ATA (SATA) hard disks
To install the SATA hard disks for a RAID configuration:
1.
Install the SATA hard disks into the drive bays.
2.
Connect the SATA signal cables.
3.
Connect a SATA power cable to the power connector on each drive.
5-36
Chapter 5: Software support
5.6.2
ULI® RAID configurations
The ULI® RAID controller supports RAID 0, RAID 1, RAID 0+1, and JBOD
configurations. Use the ULI® RAID BIOS Setup utility to configure a disk
array.
Entering the Silicon Image BIOS RAID configuration utility
To enter the Silicon Image BIOS RAID configuration utility:
1.
Boot up your computer.
2.
During POST, press <Ctrl+A>.
The RAID BIOS setup screens shown in this section are for reference
only, and may not exactly match the items on your screen.
RAID BIOS Setup Utility (c) 2004 ULi Electronics Inc.
Create RAID 0 Striping for Performance
Create RAID 1 Mirroring for Reliability
Create RAID 0+1 for Striping, Mirroring
Create JBOD for integrated Capacity
64K
Stripe Size
Delete RAID Settings & Partition
Delete All RAID Settings & Partition
Rebuild RAID Array
B Channel
Channel
Channel
Channel
0
1
2
3
Master:
Master:
Master:
Master:
Drive Model
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
Capacity
RAID Array A
RAID Array B
RAID Array C
www.uli.com.tw
SPACE: Select
: Moving Cursor
↑↓
Enter: Select & Finish
ESC: Exit
Mode
SATA
SATA
SATA
SATA
1
1
1
1
RAID Type
Capacity
XXXXX MB
XXXXX MB
XXXXX MB
XXXXX MB
RAID Array/Type
Stripe Size RAID Name
:
:
:
The Main Menu on the upper left side allows you to select an operation to
perform. The Main Menu options include:
C r e a t e R A I D 0 S t r i p i n g f o r P e r f o r m a n c e - creates a new legacy RAID
set or allocates spare drives.
C r e a t e R A I D 1 M i r r o r i n g f o r R e l i a b i l i t y - creates and maintains an
identical image of data from one drive to a second drive.
C r e a t e R A I D 0 + 1 f o r S t r i p i n g , M i r r o r i n g - creates a RAID setup with
all the benefits of both RAID 0 and RAID 1 configuration.
C r e a tte
e JBOD for integrated capacity - creates a JBOD configuration.
ASUS P5RD1-V Deluxe
5-37
S t r i p e S i z e - sets the stripe size.
D e l e t e R A I D S e t t i n g s & P a r t i t i o n - deletes a selected RAID set and
partition.
D e l e t e A l l R A I D S e t t i n g s & P a r t i t i o n - deletes all current RAID
set(s) and partition(s).
R e b u i l d R A I D a r r a y - rebuilds mirror drive(s).
On the upper right side of the screen is the legend box. The keys on the
legend box allow you to navigate through the setup menu options. The
following lists the keys in the legend box and their corresponding functions.
S P A C E : Select an item
↑, ↓
:
Enter :
ESC
Move cursor to the next item
Confirms a selected item
:
Exit
Creating a RAID 0 configuration
To create a RAID 0 set:
1.
2.
From the ULI RAID BIOS Setup utility menu, move the cursor to
C r e a t e R A I D 0 S t r i p i n g f o r P e r f o r m a n c e then press <Enter>.
Use the up or down arrow keys to select a drive then press <Space>
or <Enter>. The striped mark “S” appears before a selected drive.
3.
Repeat step 2 to select the second drive.
4.
The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
5.
Key in a RAID name with a maximum of eight (8) alphanumeric
characters then press <Enter>. Do not use special characters or
symbols.
6.
The utility displays the RAID Array settings at the bottom of the
screen.
5-38
Chapter 5: Software support
Creating a RAID 1 configuration
To create a RAID 1 set:
1.
2.
From the ULI RAID BIOS Setup utility menu, move the cursor to
C r e a t e R A I D 1 M i r r o r i n g f o r R e l i a b i l i t y then press <Enter>.
Use the up or down arrow keys to select a drive then press <Space>
or <Enter>. The striped mark “M” appears before a selected drive.
3.
Repeat step 2 to select the second drive.
4.
The utility prompts the following warning message:
Create RAID 1 (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
5.
Key in a RAID name with a maximum of eight (8) alphanumeric
characters then press <Enter>. Do not use special characters or
symbols.
6.
The utility prompts the following confirmation message:
Duplicate Data from M to m (Y/N)?
Press <Y> to duplicate data from the source disk “M” to the target
disk “m” or press <N> to create a RAID 1 set without duplicating the
data.
7.
If you selected <Y>, the utility will duplicate your data. The following
progress bar appears.
123456789012345678
1234567890123456789012345678901212345678901234567
123456789012345678
1234567890123456789012345678901212345678901234567
1234567890123456789012345678901212345678901234567
123456789012345678
1234567890123456789012345678901212345678901234567
123456789012345678
8.
50% completed.
The utility displays the RAID Array settings at the bottom of the
screen.
ASUS P5RD1-V Deluxe
5-39
Creating a RAID 0+1 configuration
To create a RAID 0+1 set:
1.
2.
From the ULI RAID BIOS Setup utility menu, move the cursor to
C r e a t e R A I D 0 + 1 S t r i p i n g , M i r r o r i n g then press <Enter>.
The utility prompts the following warning message:
Data on first 4 drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
3.
Key in a RAID name with a maximum of eight (8) alphanumeric
characters then press <Enter>. Do not use special characters or
symbols.
4.
The utility displays the RAID Array settings at the bottom of the
screen.
Creating a JBOD configuration
To create a JBOD set:
1.
2.
From the ULI RAID BIOS Setup utility menu, move the cursor to
C r e a t e J B O D f o r i n t e g r a t e d c a p a c i t y then press <Enter>.
Use the up or down arrow keys to select a drive then press <Space>
or <Enter>. The striped mark “J” appears before a selected drive.
3.
Repeat step 2 to select the second drive.
4.
The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
5.
Key in a RAID name with a maximum of eight (8) alphanumeric
characters then press <Enter>. Do not use special characters or
symbols.
6.
The utility displays the RAID Array settings at the bottom of the
screen.
5-40
Chapter 5: Software support
Setting the Stripe Size
To set the stripe size:
1.
2.
3.
From the ULI RAID BIOS Setup utility menu, move the cursor to
S t r i p e S i z e then press <Enter>.
Use the up or down arrow keys to select a stripe size then press
<Enter>.
The stripe size is displayed beside the Stripe Size menu item.
T I P : For server systems, we recommend using a lower array block
size. For multimedia computer systems used mainly for audio and
video editing, we recommend a higher array block size for optimum
performance.
Deleting a RAID configuration
To delete a RAID set:
1.
2.
From the ULI RAID BIOS Setup utility menu, move the cursor to
D e l e t e R A I D S e t t i n g s & P a r t i t i o n then press <Enter>.
Use the up or down arrow keys to select a RAID set then press
<Space> or <Enter>. The striped mark “E” appears before a selected
drive.
3.
The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
Pressing <Y> removes the deleted RAID Array item from the list at the
bottom of the screen.
Deleting All RAID configurations
To delete all RAID sets:
1.
2.
From the ULI RAID BIOS Setup utility menu, move the cursor to
D e l e t e A l l R A I D S e t t i n g s & P a r t i t i o n then press <Enter>.
The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to menu.
Pressing <Y> removes all the RAID Array items from the list at the
bottom of the screen.
ASUS P5RD1-V Deluxe
5-41
5.7
Creating a RAID driver disk
A floppy disk with the RAID driver is required when installing Windows®
2000/XP operating system on a hard disk drive that is included in a RAID
set.
To create a RAID driver disk:
1.
Boot your computer.
2.
Press <Del> during POST to enter the BIOS setup utility.
3.
Set the optical drive as the primary boot device.
4.
Save changes and exit BIOS.
5.
Insert the support CD into the optical drive.
6.
Press the any key when the system prompts “Press any key to boot
from the optical drive.” The following menu appears:
1) Make SIS RAID Driver Disk
2) Format Floppy Disk
3) FreeDOS command prompt
Please choose 1 ~ 3:_
7.
Press <1> to create a RAID driver disk.
8.
Insert a formatted floppy disk into the floppy drive then press
<Enter>.
9.
Follow succeeding screen instructions to complete the process.
OR
1.
Start Windows.
2.
3.
Place the motherboard support CD into the optical drive.
When the D r i v e r s menu appears, click M a k e U L I C h i p s e t D r i v e r
D i s k to create a ULI RAID driver disk.
4.
Insert a floppy disk into the floppy disk drive.
5.
Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.
To install the RAID driver:
1.
During the OS installation, the system prompts you to press the F6
key to install third-party SCSI or RAID driver.
2.
Press <F6> then insert the floppy disk with RAID driver into the floppy
disk drive.
3.
Follow the succeeding screen instructions to complete the installation.
5-42
Chapter 5: Software support
The Appendix describes the CPU
features and technologies that the
motherboard supports.
The Appendix also includes
information on the optional remote
controller, the key table, and
international TV systems and
standards.
A
Reference
information
Chapter summary
A.1
A
Enhanced Intel SpeedStep® Technology (EIST) .................... 5-1
A.1.1
System requirements ............................................. 5-1
A.1.2
Using the EIST ........................................................ 5-1
A.2
Intel® Hyper-Threading Technology ..................................... 5-3
A.3
Remote controller specifications .......................................... 5-4
A.4
Using the remote controller ................................................. 5-4
A.5
Remote controller layout ...................................................... 5-5
A.6
Remote controller functions ................................................. 5-5
A.7
A.6.1
System buttons ...................................................... 5-5
A.6.2
Key table ................................................................ 5-6
International TV systems and standards .............................. 5-7
ASUS P5RD1-V Deluxe
A.1
A.1.1
Enhanced Intel SpeedStep®
Technology (EIST)
•
The motherboard comes with a BIOS file that supports EIST. You can
download the latest BIOS file from the ASUS website
(www.asus.com/support/download/) if you need to update the
BIOS. See Chapter 4 for details.
•
Visit www.intel.com for more information on the EIST feature.
System requirements
Before using EIST, check your system if it meets the following
requirements:
•
Intel® Pentium® 4 processor with EIST support
•
BIOS file with EIST support
•
Operating system with EIST support (Windows® XP SP2/Windows®
Server 2003 SP1/Linux 2.6 kernel or later versions)
A.1.2
Using the EIST
To use the EIST feature:
1.
2.
3.
Turn on the computer, then enter the BIOS Setup.
Go to the Advanced Menu
Menu, highlight CPU Configuration
Configuration,
then press <Enter>.
Set the Intel(R) SpeedStep Technology item to [Automatic],
then press <Enter>. See page 4-25 for details.
4.
Press <F10> to save your changes and exit the BIOS setup.
5.
After the computer restarts, right click on a blank space on the desktop,
then select Properties from the pop-up menu.
When the Display Properties
window appears, click the
Screen Saver tab.
Click the Power button on the
Monitor power section to open
the Power Options
Properties window.
6.
7.
ASUS P5RD1-V Deluxe
A-1
8.
9.
On the Power schemes section,
click , then select any option
except Home/Office Desktop
or Always On
On.
Click A p p l y
y, then click O K
K.
10. Close the Display Properties
window.
After you adjust the power
scheme, the CPU internal
frequency slightly decreases
when the CPU loading is low.
The screen displays and procedures may vary depending on the
operating system.
A-2
Appendix
A.2
Intel® Hyper-Threading Technology
•
The motherboard supports Intel® Pentium® 4 LGA775 processors
with Hyper-Threading Technology.
•
Hyper-Threading Technology is supported under Windows® XP/2003
Server and Linux 2.4.x (kernel) and later versions only. Under Linux, use
the Hyper-Threading compiler to compile the code. If you are using any
other operating systems, disable the Hyper-Threading Technology item
in the BIOS to ensure system stability and performance.
•
Installing Windows® XP Service Pack 1 or later version is recommended.
•
Make sure to enable the Hyper-Threading Technology item in BIOS
before installing a supported operating system.
•
For more information on Hyper-Threading Technology, visit
www.intel.com/info/hyperthreading.
Using the Hyper-Threading Technology
To use the Hyper-Threading Technology:
1.
Install an Intel® Pentium® 4 CPU that supports Hyper-Threading
Technology.
2.
Power up the system and enter the BIOS Setup. Under the A d v a n c e d
Menu
u, make sure that the item H y p e r - T h r e a d i n g T e c h n o l o g y is
set to E n a b l e d
d. See page 4-24 for details.
The BIOS item appears only if you installed a CPU that supports
Hyper-Threading Technology.
3.
Restart the computer.
ASUS P5RD1-V Deluxe
A-3
A.3
Remote controller specifications
The optional ASUS remote controller allows you to operate the TV tuner
from a distance. Use the remote controller to navigate through the ASUS
Home Theater windows.
Operating range
5 meters (max)
Power Source
3V (2 x “AAA” batteries)*
Receiver
USB infrared receiver (supplied)
*not included
The remote controller is purchased separately.
A.4
Using the remote controller
To use the remote controller:
1.
Install the remote controller batteries.
2.
Insert the receiver USB plug to an
available USB port in your computer.
3.
Install the receiver at an unboscured
location for optimum operation.
2.
Turn on your computer, then open the
ASUS Home Theater. Refer to section
“5.5 ASUS Home Theater” for details.
3.
Navigate through the ASUS Home
Theater windows using the remote
controller.
Remote controller receiver
A-4
Appendix
A.5
Remote controller layout
A.6
Remote controller functions
A.6.1
System buttons
SYSTEM BUTTONS
Button
Function
Power Off
Launch TV mode
Print
Close Home Theater
Launch Music mode
Launch Pictures mode
Launch Video Mode
Open the DVD Menu screen
ASUS P5RD1-V Deluxe
A-5
A.6.2
Key table
Button
TV function
Keyboard
control
Remote
mouse
Right
VK_Right
Right
Up
VK_Up
Up
Down
VK_Down
Down
Left
VK_Left
Left
Back
Backspace
Left-click
OK/Select
VK_Return
Enter
Tab
VK_Tab
Right-click
Toggle/Switch between
Tv and remote mouse mode
Previous chapter
Ctrl+B
Pause
Ctrl+P
Play
Ctrl+Shift+P
Next
Ctrl+F
Rewind
Ctrl+Shift+B
Stop
Ctrl+S
Fwd
Ctr+Shift+F
Volume up/Volume down
F10/F9
Launch Home Theater
0~9
A-6
Channel up/Channel down
Page up/Page down
Mute
F8
Record
Ctrl+R
Select channel
VK_0 ~ VK_9
Shuffle
Ctrl+Alt+Shift+B
Repeat
Ctrl+Alt+Shift+F
Appendix
A.7
International TV systems
and standards
•
Since TV systems and standards may change anytime without
notice, this list is provided for reference only.
•
Make sure that your TV card conforms with the system or standard
used in your country or location.
AREA
TV
COLOR
Albania
Argentina
Australia
Austria
Azores Is. (Portugal)
Bahamas
Bahrain
Barbados
Belgium
Bermuda
Brazil
B/G
N
B/G
B/G
B
M
B
N
B/G
M
M
PAL
Bulgaria
Canada
D
M
CC
B
D
N
B
D/K
B
B
B
B/G
E/L
I
B/G
B/G
B
B/H
I
B/G
& D/K
B
B
B
H
I
Canary Is.
China
Colombia
Cyprus
Czech Republic
Denmark
Egypt
Faroe Islands (DK)
Finland
France
Gambia
Germany
Germany (prev East)
Gibraltar
Greece
Hong Kong
Hungary
Iceland
India
Indonesia
Iran
Ireland
ASUS P5RD1-V Deluxe
PAL
PAL
PAL
STEREO
PAL-N
FM-FM
FM-FM
PAL
NTSC
PAL
NTSC
Nicam
NTSC
PAL-M
SECAM
NTSC
SUBTITLE
Teletext
Teletext
Teletext
MTS
MTS
PAL
PAL
NTSC
PAL
SECAM/PAL
PAL
PAL
SECAM
PAL
PAL
SECAM/PAL
Nicam
SECAM
PAL
Nicam
FM-FM
TeleText
TeleText
Antiope
TeleText
PAL
SECAM
PAL
PAL
Nicam
Nicam
(was SECAM)
(Budapest only)
PAL
PAL
PAL
PAL
SECAM
Nicam
TeleText
A-7
A-8
AREA
TV
Israel
Italy
Jamaica
Japan
Jordan
Kenya
Korea
Luxembourg
Madeira
Madagascar
Malaysia
Malta
Mauritius
Mexico
Monaco
Morocco
Netherlands
New Zealand
North Korea
Norway
Pakistan
Paraguay
Peru
Philipines
Poland
Portugal
Romania
Russia
Saudi Arabia
Seychelles
Singapore
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Tahiti
Taiwan
Thailand
Trinidad
Tunisia
Turkey
Ukraine
United Arab Emirates
United States
United Kingdom
Vietnam
Yugoslavia
Zambia
Zimbabwe
B/G
B/G
M
M
B
B
M
B/G
B
B
B
B/G
B
M
L/G
B
B/G
B/G
D, D/K
B/G
B
N
M
M
D/K
B/G
G
D/K
B
I
B
I
N
B/G
B/G
B/G
B/G
KI
M
B
M
B
BPAL
D/K
B/G
M
I
M/D
B/G
B/G
B/G
COLOR
STEREO
SUBTITLE
PAL
PAL
SECAM
NTSC
PAL
PAL
NTSC
PAL
PAL
SECAM
PAL
PAL
SECAM
NTSC
SECAM/PAL
SECAM
PAL
PAL
SECAM/PAL
PAL
PAL
PAL
NTSC
NTSC
PAL
PAL
PAL
SECAM
SECAM
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
SECAM
NTSC
PAL
NTSC
SECAM
Nicam
FM/FM
TeleText
TeleText
Matrix
TeleText
MTS
CC
FM-FM
Nicam
TeleText
TeleText
Nicam
Nicam
Teletext
Teletext
Nicam
Nicam
FM-FM
Teletext
TeleText
TeleText
SECAM
PAL
NTSC
PAL
NTSC/SECAM
PAL
PAL
PAL
Appendix