Belkin Secure 2and4 port DisplayPort KVM Switch

Belkin® Secure 2/4 port DisplayPort
KVM Switch User Manual
User Manual
F1DN102P 2-port Displayport, Single-Head + CAC + DCU
F1DN104P 4-port Displayport, Single-Head + CAC + DCU
F1DN104W4-port Displayport, Dual-Head + CAC + DCU
F1DN104Q4-port Displayport, Quad-Head + CAC + DCU
Document Number 8820-00776 Rev. A00
TABLE OF CONTENTS
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Operating the KVM Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Security Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Equipment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Unit Display Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre-Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connection and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Color Code Chip Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
Common Access Card (CAC) Configuration and Operation . . . . 18
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Reporting Belkin Product Security Vulnerability . . . . . . . . . . 25
14
14
15
16
i
INTRODUCTION
9
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Package Contents
Thank you for purchasing this Belkin Secure DisplayPort KVM. This
Switch is designed for use in secure environment installations. The
Switch offers safe centralized control, which prevents unintended
data transfer between computers running at different security levels.
The Switch provides the highest security safeguards and features that
meet today’s Information Assurance (IA) computing requirements.
• Belkin Secure DisplayPort KVM
• 12V 1.5A DC Power Supply
Belkin Secure DisplayPort KVM is especially challenging in terms of
security as DisplayPort is a very robust protocol by nature which is
capable of transferring various types of information, such as USB and
Ethernet other than display. Belkin has developed this unique Secure
KVM switch with the highest possible security in mind, assuring no
leakage of information between connected computers through any
channels including DP dedicated channels.
• Interchangeable Port Color Chips
• Port-Naming Labels
• User Manual
This User Manual provides all the details you’ll need to install and
operate your new Switch, in addition to expert troubleshooting
advice—in the unlikely event of a problem.
Important: This product is equipped with always-on active
anti-tamper system. Any attempt to open the enclosure
may activate the anti-tamper system and render the unit
permanently inoperable. If the unit’s enclosure appears
disrupted or if all the port LEDs flash continuously, please call
Belkin Technical Support at (800) 282-2355 .
Important Security Note:
If you are aware of potential security vulnerability while
installing or operating this product, we encourage you to
contact us immediately at the following email address:
gov_security@belkin.com
Please note: Belkin Secure KVMs cannot be upgraded, serviced
or fixed.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
1
INTRODUCTION
9
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Safety Precautions
•T
he product should be stored and used only in temperature and
humidity controlled environments as defined in the product’s
environmental specifications.
Please read the following safety precautions carefully before using
the product:
• Before cleaning, disconnect the product from the AC power source
•T
he product contains an internal battery. Battery is non-replaceable.
Never attempt to replace battery as any attempt to open product
enclosure would permanently damage the product.
• Be sure not to expose the product to excessive humidity.
•D
o not store or use for extensive period of time in extreme thermal
conditions—it may shorten product lifetime.
• Be sure to install the product on a clean secure surface.
• Do not place the DCU cable in a path of foot traffic.
• If the product is not used for a long period of time, remove the
KVM’s wall-mount power supply from the mains jack.
• If one of the following situations occurs, get the product checked by
a qualified service technician:
o Liquid penetrates the product’s case.
o The product is exposed to excessive moisture or water.
oT
he product is not working well even after carefully following the
instructions in this user’s manual.
o The product has been dropped or is physically damaged.
oT
he product has obvious signs of breakage or loose
internal parts.
o AC Power plug or cable overheated, broken, or damaged.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
2
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Security Features
Non-Reprogrammable Firmware
The Belkin Secure DisplayPort KVM is the most advanced and
secure commercially available KVM Switch available today. Below is a
summary of all the security features incorporated into the Switch.
The Switch features custom firmware that is not reprogrammable,
preventing the ability to tamper with the KVM logic.
Protected DisplayPort Channel
Unidirectional Data Paths
Belkin Secure DisplayPort KVM switch includes safety mechanisms
to protect DisplayPort channels and preventing leakage of information
between connected computers and the DisplayPort display.
Optical diodes used in USB data paths provide high isolation and
prevent data leakage.
Dedicated Processors
The Belkin Secure DisplayPort KVM uses one-piece aluminum
enclosure to protect the product from physical tampering and to
minimize radiated electromagnetic emissions that can be snooped or
intercepted.
Heavy Duty Aluminum Enclosure
The Switch features a dedicated processor per computer port. This
keeps each computer running on different security levels physically
separated and secure at all times, and prevents any unintended data
leakage between computers.
Active Always-On Anti-Tampering
Active always-on chassis anti-tampering system prevents the Belkin
Secure DisplayPort KVM electronic circuitry from being accessed and
tampered with by permanently disabling the product once tampering
is detected.
No Memory Buffer
The Switch does not have a memory buffer and does not have the
ability to store data. This prevents any keystrokes or other data
input from being unintentionally transferred when switching between
computers, ensuring the integrity of data.
Tamper-Evident Label
A holographic security tamper-evident label is placed on the
enclosure to provide a visual indication if the Switch has been opened
or compromised.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
3
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Other Features
Tamper-Proof Hardware
Protected Display Information
All integrated circuits are soldered directly to the printed circuit board
to prevent tampering with the components.
Protected DDC/EDID emulation prevents software weaknesses that
can cause data leakage while maintaining compatibility with the
console display.
Protected Display Information
Protected DDC/EDID emulation prevents software weaknesses that
can cause data leakage while maintaining compatibility with the
console display.
USB Device Detection
Storage and other unsafe USB devices are rejected when connected
to the Switch. Only mouse, keyboard, and CAC reader data are
passed through.
USB Device Detection
Storage and other unsafe USB devices are rejected when connected
to the Switch. Only mouse, keyboard, and CAC reader data are
passed through.
Secure Packaging
“Tear away” packaging ensures secure delivery of the Switch as it is
routed to the end user. The recyclable packaging also breaks down
flat, simplifying the cleanup process.
Secure Packaging
“Tear away” packaging ensures secure delivery of the Switch as it is
routed to the end user. The recyclable packaging also breaks down
flat, simplifying the cleanup process.
EAL 4+ Evaluation (Canada)
EAL 4+ Evaluation (Canada)
Bloomberg Keyboard Support
The Belkin Secure DisplayPort KVM switch was evaluated in Canada
to EAL 4+ level and is listed on the Common Criteria Portal
The Belkin Secure DisplayPort KVM supports the Bloomberg
Keyboard through the Console PS/2 Keyboard jack.
The Belkin Secure DisplayPort KVM switch was evaluated in Canada
to EAL 4+ level and is listed on the Common Criteria Portal
Tamper-Proof Hardware
All integrated circuits are soldered directly to the printed circuit board
to prevent tampering with the components.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
4
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Equipment Requirements
Cables
Belkin highly recommends you use Belkin Display Port/USB KVM
Cable Kits for your Switch to help ensure superior performance.
These cables offer the highest quality possible to ensure optimal data
and video transmission. One Cable Kit is required per connected
computer.
Belkin DP to DP KVM Cable Kits with audio:
F1D9019b06 – 6ft (1.8m)
F1D9017b10 – 10ft (3m)
Belkin CAC USB A/B Cables
Belkin DP to DVI Cables
F1D9013b06 – 6 ft. (1.8m)
F2CD002b06-E (DP to DVI)
F1D9013b10 – 10 ft. (3m)
F1D9013b15 – 15 ft. (4.6m)
Note: Due to USB and DisplayPort signal limitations, the cable length
cannot exceed 15 feet (4.6m).
Belkin Smart Cables
F1D9011b06 (USB to DVI-I Smart Cable, 6’)
F1D9017b06 (DP to DVI Smart Cable, 6’)
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
5
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
System Requirements
5
6
7
8
Monitors
• Digital displays with Display Port 1.1 and 1.2 signals
Operating-System (OS) Platforms
The Switch is compatible with computers running on, but not limited
to, the following OS platforms:
Common Access Card Readers
• Windows® 2000
Desktop Controller Unit
• Windows XP (Home/Professional)
• Windows 2003 Server
The Belkin Secure DisplayPort KVM Switch is compatible with the
following types of Remote Desktop Controller device:
• Windows 7
•
• Windows 8
• DCU must be connected through
• Windows Vista®
Belkin RJ14 custom cable standard: Belkin Part Numbers:F1D9026-06
(CABLE, RJ14, 6P6C, 26AWG, UNSHIELDED, DCU CABLE, 6’),
F1D9026-50 (CABLE, RJ14, 6P6C, 26AWG, UNSHIELDED, DCU
CABLE, 50’) and higher LAN cable.
• USB-compatible CAC or Smart Card Readers
• Red Hat® Linux®
• Other Linux distributions
DCU device connected to the switch DCU port.
• Mac OS® X v10.3 and higher
Keyboards
Do not connect DCU to anything but Belkin Secure KVMs via
supplied RJ14 custom cable.
•U
SB-compatible or keyboard + mouse composite device (keyboards
with built-in USB hubs are not supported).
Mice
• USB-compatible (non-composite)
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
6
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Unit Display Diagram, Front View
IMPORTANT
NOTICE:
If for any reason
the tamper-evident
seal is missing,
appears disrupted,
or looks different
than the example
shown here, please
call Belkin Technical
Support at (800)
282-2355 .
(F1DN104P model shown)
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
7
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
Back View
(F1DN104P model shown)
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
8
5
6
7
8
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
Back View
(F1DN104Q model shown)
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
9
5
6
7
8
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
Back View
(F1DN104W model shown)
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
10
5
6
7
8
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Specifications
Part No.:
F1DN102P, F1DN104P, F1DN104W
Console Monitor Port: Console Speaker:
F1DN104Q
Enclosure: faceplate
DisplayPort 1.1 and 1.2 Signals
3.5mm female
CPU Keyboard/Mouse Ports: USB Type B
Metal enclosure with aluminum
CPU CAC Ports:
Power Requirements:100–240VAC, 1A Max, 50/60Hz
USB Type B
CPU Keyboard/Mouse Ports: USB Type B
AC Input:
100 to 240VAC
CPU Audio: 3.5mm female
No. of Users Supported:
1
CPU Monitor Ports:
DisplayPort 1.1 and 1.2 Female
No. of Computers Supported:2 (F1DN102P,), 4 (F1DN104P,
F1DN104W, F1DN104Q)
Port Selectors:2 and 4 respectively for 2and 4-port models
No. of monitors per computer supported:
LED Indicators:2 and 4 respectively for 2and 4-port models
F1DN102P, F1DN104P-
1
F1DN104W-
2
User Channel Selection Methods Front panel push-buttons,
DCU and keyboard shortcuts.
F1DN104Q -
3 DisplayPort and 1 DVI
Operating Temp: 32° to 104° F (0° to 40° C)
Resolution Support:
Up to 2560x1600
Storage Temp: -4° to 140° F (-20° to 60° C)
Console Keyboard Input:
USB Type A
Humidity: 0-80% RH, non-condensing
Console Mouse Input:
USB Type A
Warranty: 3 years
Console CAC Input:
USB Type A
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
11
OVERVIEW
Table of Contents
SECTIONS
1
2
3
4
Dimensions:
(F1DN102P/104P) 12.5 (W) x 1.7 (H) x 6.4 (L) inches
(F1DN104W) 12.5 (W) x 2.5 (H) x 6.4 (L) inches
(F1DN104Q) 12.5 (W) x 3.8 (H) x 6.4 (L) inches
Weight:
(F1DN102P/104P) 3.9 lbs.
(F1DN104W) 4.85 lbs.
(F1DN104Q) 5.85 lbs.
Made in the USA
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
12
5
6
7
8
INSTALLATION
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Pre-Configuration
Connection and Installation
Where to place the Switch:
Step 1 Connecting the Console to the Switch
The enclosure of the Switch is designed for desktop or rack-mount
configuration. Rack-mount brackets are included with the Switch.
Warning: Before attempting to connect anything to the Switch or your
computers, please ensure that all computer equipment and devices
are powered off.
Connect your monitor, keyboard, mouse, and speaker to the rear of
the Switch in the “User Console” section.
Consider the following when deciding where to place the Switch:
• Your proximity to the port selectors on the front of the Switch
Step 2 Power Up
•T
he lengths of the cables attached to your keyboard, monitor,
and mouse
2.1 Power on the monitor.
2.2Power up the Belkin Secure DisplayPort KVM by connecting
the power. The display diagnostic LED should be solid green
a few seconds after power up. This indicates the display EDID
information has been captured and secured.
• The location of your computers in relation to your console
•T
he lengths of the cables you use to connect your computers
to the Switch
Warning: Avoid placing cables near fluorescent lights,
air-conditioning equipment, or machines that create electrical noise
(e.g., vacuum cleaners).
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
13
INSTALLATION
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Step 3 Connecting Computers to the Switch
Step 4 Powering Up the Computers
3.1 Make sure all computers are powered off.
Power up all the attached computers, and check for display
and peripheral functionality. All computers can be powered on
simultaneously.
3.2Using the Belkin DP/USB KVM Cable Kit (sold separately),
connect the computers to a port on the rear of the KVM Switch.
Note: The Cable Kit must be connected directly to a free USB port on
your computer with no USB hubs or other devices in between.
Note: Your computers should recognize the Switch and automatically
install the HID USB driver if necessary.
When you power on your computers, the Switch emulates both a
mouse and keyboard on each port and allows your computers to
boot normally. The computer connected to port “1” will be displayed
on the monitor. Check to see that the keyboard, monitor, and mouse
are working normally. Proceed to do this with all occupied ports to
verify that all computers are connected and responding correctly.
If you encounter an error, check your cable connections for that
computer and reboot. If the problem persists, please refer to the
Troubleshooting section in this User Manual.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
14
INSTALLATION
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Color Code Chip Installation
Port Name Label
The Belkin Secure DisplayPort KVM port-selector buttons can
be color-coded for easier identification. Refer to the installation
instructions below.
The included network-name and blank labels can be placed in the
area underneath the port-selector buttons for port identification.
Note: You may have to remove the existing black color chip first.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
15
OPERATING THE KVM SWITCH
Table of Contents
SECTIONS
1
2
3
4
Operation
Selecting a Computer Using Port Selectors
Now that you have connected your console and computers to the
Switch, it is ready for use. You can select which computer you wish
to control by pressing the corresponding port selector on the front of
the Switch. The LED number will illuminate to indicate which computer
(or port) is currently selected. It may take approximately 1 second for
the video signal to sync after switching ports. This is normal behavior
and is dependent on the display connected. This is normal operation
and ensures that proper synchronization is established between the
monitor and the connected computers.
Keyboard and mouse inputs can only be sent to the selected
computer, and video outputs can only be received from the selected
computer. The Switch also prevents any data transfer between
connected computers, ensuring the security of your computers.
Please note that the default port at power-up is port 1. In case
of a power failure or if the power is cycled, the Switch will
default to port 1.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
16
5
6
7
8
COMMON ACCESS CARD (CAC) CONFIGURATION AND OPERATION
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Step 1 Installation
CAC connection to the computer requires a separate USB cable
connection and allows the user to specify whether there is a
CAC required for that computer or not. This allows the CAC to be
connected and controlled separately to the keyboard, mouse, video
and audio.
1.1Using the included USB cable, connect one end of the cable to
the computer that requires CAC, and the other end to the CAC
port on the Belkin Secure DisplayPort KVM that corresponds to
the computer.
1.2Enable CAC for the same port connection in Step 1.1 by switching
the CAC switch to the right.
1.3Repeat steps above for additional computers that require CAC.
Note: Make sure that the CAC switch is disabled (left) for all other
non-connected CAC systems.
1.4Once configured, the CAC connection will be switched only when
required by the connected computer. When switching from a CAC
enabled port to a non-CAC enabled port, the CAC connection will
remain with the last previously selected port where the CAC was
set to enable.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
17
TROUBLESHOOTING
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
General
Video
My computer does not boot when connected to the Switch but
works fine when I connect my keyboard, video, and mouse directly
to my computer.
I am getting ghosting, shadowing, or fuzzy images on
my monitor.
•C
heck that all video cables are inserted properly to the Switch,
computer, and monitor.
•M
ake sure that the DP/USB KVM Cable Kit is connected tightly
between the Switch and the computer.
•W
ith everything connected, power-cycle the Belkin Secure
DisplayPort KVM to reset the video.
The Switch does not turn on.
• Make sure the Video Diagnostic LED is solid green.
•E
nsure that the AC power cord is securely connected to both the
AC inlet and to the wall outlet.
•C
heck that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
• Check that the power switch is in the ON position.
• Lower the video resolution of your monitor.
• Check that the video-cable length does not exceed 15 feet (4.6m).
The Switch makes rapid clicking noises and the port LEDs flash
continuously when turned on.
•C
heck that the graphics card you are using supports the resolution
and refresh-rate setting on your computer.
• If the clicking noises continue, the unit may have been tampered
with or experienced severe impact.
•C
onnect the monitor directly into the computer you are having
trouble with to see if the problem still appears.
NOTE: This Switch is equipped with active anti-tamper triggers. Any
attempt to open the enclosure will activate the anti-tamper triggers
and render the unit inoperable. If the unit’s enclosure appears
disrupted or if all the port LEDs flash continuously, please call Belkin
Technical Support at (800) 282-2355.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
• Do not use video splitters.
18
TROUBLESHOOTING
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Keyboard
I am getting a blank screen on my monitor.
• Ensure that the power switch is in the ON position.
The computer does not detect my keyboard, or my keyboard does
not work when I switch computers or reboot.
• Check that the display is turned on
• Check that the cables are connected, and check that the display
input is DisplayPort
•C
heck that the keyboard you are using is connected properly to
the Switch.
• Check that all video cables are inserted properly.
•C
heck that the USB cable between the Switch and the computer
is completely connected.
• Ensure that the power cord is inserted securely to the AC inlet.
• Try connecting to a different USB port on the computer.
•C
onnect your monitor directly to the computer to verify that your
monitor is functioning properly.
•M
ake sure the keyboard works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
• Reboot the computer.
• Try a different video cable.
•M
ake sure you are not using a keyboard with an integrated USB
hub or other USB-integrated devices.
• Try a different monitor.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
• Try a different keyboard.
I have difficulty inserting a DisplayPort cable into the Switch.
• Do not use a USB extension cable.
• Check that the connectors are not bent or damaged.
•C
heck if the contacts on the Switch DisplayPort connectors are
not bent or damaged.
The CAPS, NUM, and Scroll Lock lights on my keyboard do not
function when I connect to the Belkin Secure DisplayPort KVM.
This is normal operation. The lock-state information is fully functional.
Due to the security of the Belkin Secure DisplayPort KVM and known
exploitation of lock-state information for leakages, the LED status is
not supported. Please refer to the operating system for verification of
the lock-state information for CAPS, NUM, and Scroll Lock.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
19
TROUBLESHOOTING
Table of Contents
SECTIONS
1
2
3
4
5
6
7
8
Mouse
CAC Related Faults
The computer does not detect my mouse, or my mouse does not
work when I switch computers or reboot.
The CAC reader is not functioning.
•C
heck that the mouse you are using is connected properly to the
Switch.
• Check to see if the LED is illuminated for the CAC reader.
•C
onfirm that the CAC reader switch on the Belkin Secure
DisplayPort KVM is properly set to the ON position.
•C
heck that the USB cable between the Switch and the computer
is completely connected.
• Try using the CAC reader on a different KVM channel.
• Try connecting to a different USB port on the computer.
• Try a different CAC reader.
•M
ake sure the mouse works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
Important Security Note:
If you are aware of potential security vulnerability while installing or
operating this product, we encourage you to contact us immediately
at the following email address: gov_security@belkin.com
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
The gov_security@belkin.com email address is not intended to
reach technical support on Belkin products or services. Any support
inquiries should be directed to support@belkin.com.
• Try a different mouse.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
20
INFORMATION
Table of Contents
SECTIONS
1
2
3
4
FCC Statement
6
7
8
Belkin International, Inc., Limited 3-Year Product Warranty
What this warranty covers.
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
Belkin International, Inc. (“Belkin”) warrants to the original purchaser
of this Belkin product that the product shall be free of defects in
design, assembly, material, or workmanship.
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa
Vista, CA 90094, declare under our sole responsibility that the
products: F1DN102P, F1DN104P ,F1DN104W ,F1DN104Q,to which this
declaration relates:
What the period of coverage is.
Belkin warrants the Belkin product for three years.
Comply with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product). Belkin
reserves the right to discontinue any of its products without notice,
and disclaims any limited warranty to repair or replace any such
discontinued products. In the event that Belkin is unable to repair or
replace the product (for example, because it has been discontinued),
Belkin will offer either a refund or a credit toward the purchase of
another product from Belkin.com in an amount equal to the purchase
price of the product as evidenced on the original purchase receipt as
discounted by its natural use.
CE Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that
the products F1DN102P, F1DN104P ,F1DN104W ,F1DN104Q, to which
this declaration relates, are in conformity with Emissions Standard
EN55022 and with Immunity Standard EN55024, LVP EN61000-3-2,
and EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme á la norme NMB-003
du Canada.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
5
21
INFORMATION
Table of Contents
SECTIONS
1
2
3
4
What is not covered by this warranty?
6
7
8
2.Your Belkin Customer Service Representative will then instruct
you on how to forward your receipt and Belkin product and how to
proceed with your claim.
All above warranties are null and void if the Belkin product is not
provided to Belkin for inspection upon Belkin’s request at the sole
expense of the purchaser, or if Belkin determines that the Belkin
product has been improperly installed, altered in any way, or
tampered with. The Belkin Product Warranty does not protect against
acts of God such as flood, lightning, earthquake, war, vandalism,
theft, normal-use wear and tear, erosion, depletion, obsolescence,
abuse, damage due to low voltage disturbances (i.e. brownouts or
sags), non-authorized program, or system equipment modification
or alteration.
Belkin reserves the right to review the damaged Belkin product. All
costs of shipping the Belkin product to Belkin for inspection shall
be borne solely by the purchaser. If Belkin determines, in its sole
discretion, that it is impractical to ship the damaged equipment to
Belkin, Belkin may designate, in its sole discretion, an equipment
repair facility to inspect and estimate the cost to repair such
equipment. The cost, if any, of shipping the equipment to and from
such repair facility and of such estimate shall be borne solely by the
purchaser. Damaged equipment must remain available for inspection
until the claim is finalized. Whenever claims are settled, Belkin
reserves the right to be subrogated under any existing insurance
policies the purchaser may have.
How to get service.
To get service for your Belkin product you must take the
following steps:
1.Contact Belkin International, Inc., at 12045 E. Waterfront Drive,
Playa Vista, CA 90094, Attn: Customer Service, or call
(800)-223-5546, within 15 days of the Occurrence. Be
prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
5
22
INFORMATION
Table of Contents
SECTIONS
1
2
3
4
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN.
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS
REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY
OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES,
IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS
WARRANTY.
Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR MULTIPLE
DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS OR
PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
This warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state. Some states do not
allow the exclusion or limitation of incidental, consequential, or other
damages, so the above limitations may not apply to you.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
23
5
6
7
8
INFORMATION
Table of Contents
SECTIONS
1
2
3
4
Reporting Belkin Product Security Vulnerability
If you are aware of potential security vulnerability with any
Belkin Government product, we encourage you to contact us
immediately at the following email address: gov_security@
belkin.com or our technical support line at: 1-800-419-5546
After your communication is received, Belkin Government
personnel will contact you to follow up. To ensure confidentiality,
Belkin encourages you to use our PGP encryption key.
The gov_security@belkin.com email address is
not intended to reach technical support on Belkin
Government products or services. Any support inquiries
should be directed to support@belkin.com.
Belkin® Secure 2/4 port DisplayPort KVM Switch User Manual
24
5
6
7
8
© 2013 Belkin International, Inc . All rights reserved . All trade names are registered trademarks of
respective manufacturers listed . Windows, Windows Vista, Microsoft, and IntelliMouse are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries . Mac OS and Mac are trademarks of Apple Inc ., registered in the U .S . and other countries .