Samsung LN-T5265F User manual

Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Contacte con SAMSUNG WORLD-WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de
Atención al Cliente.
Country
Customer Care Center
Web Site
CANADA
1-800-SAMSUNG (7267864)
www.samsung.com/ca
U.S.A
1-800-SAMSUNG (7267864)
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
LN-T4061F
LN-T4065F
LN-T4661F
LN-T4665F
LN-T5265F
TFT-LCD TELEVISION
Owner’s
Instructions
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
BN68-01178A-00
· Model __________
· Serial No. ____________
Important Warranty Information Regarding Television Format Viewing
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format,
or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and
programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary
images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent
burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display
full screen moving images, not stationary patterns or dark bars.
On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format
selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain
third parties. In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484,
5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247,
5,960,037, 6,023,490, 5,878,080, and under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are
granted for commercial use. The license does not cover any product unit other than this product unit and the license
does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or
sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode
audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third
parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights
are granted for commercial use. The license does not cover any product unit other than this product unit and the license
does not extend to any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or
sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode
audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product
features or functions that do not conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
This image retention is also known as "screen burn".
To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
•
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Précautions à prendre lors de l’affichage d’une image fixe
Une image fixe peut causer des dommages irrémédiables à l’écran du téléviseur.
• N’affichez pas une image fixe sur l’écran LCD plus de 2 heures. Cela pourrait provoquer une rémanence de l’image à l’écran.
Cette rémanence de l’image est également appelée “brûlure de l’écran”. Pour éviter une telle rémanence de l’image à l’écran,
réduisez la luminosité et le contraste de l’écran lorsque vous laissez une image fixe affichée
•
Regarder l’écran LCD du téléviseur en format 4:3 pendant une longue période peut laisser des traces de
bordures à gauche, à droite et au centre de l’écran, à cause de la différence d’émission de lumière sur l’écran.
La lecture d’un DVD ou l’utilisation d’une console de jeu peut avoir un effet similaire sur l’écran. Les dommages
provoqués par les effets qui précèdent ne sont pas couverts par la garantie.
• L’affichage d’images fixes de jeux vidéo et d’ordinateurs pendant plus longtemps qu’une période spécifique peut provoquer des
rémanences.Pour éviter cela, réduisez la “luminosité” et le “contraste” lors de l’affichage d’images fixes.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
English
Contents
GENERAL INFORMATION
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CHANNEL CONTROL
List of Features..................................................................2
Accessories .......................................................................2
Viewing the Control Panel ................................................3
Viewing the Connection Panel ..........................................4
Remote Control .................................................................5
Installing Batteries in the Remote Control .........................6
CONNECTIONS
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Connecting VHF and UHF Antennas.................................6
Connecting Cable TV ........................................................7
Connecting a VCR.............................................................8
Connecting a Camcorder ..................................................9
Connecting a DVD Player/Set-Top Box .............................9
Connecting a DVD Player/Set-Top Box via HDMI ...........10
Connecting a DVD Player/Set-Top Box via DVI ..............10
Connecting a Digital Audio System .................................11
&RQQHFWLQJDQ$PSOL¿HU'9'+RPH7KHDWHU ..................11
Connecting a PC .............................................................11
Turning the TV On and Off ..............................................12
Plug & Play Feature.........................................................12
Changing Channels .........................................................13
Adjusting the Volume.......................................................14
Viewing the Display .........................................................14
Viewing the Menus ..........................................................15
Memorizing the Channels................................................15
Setting Up Your Remote Control .....................................17
Remote Control Codes ....................................................19
To Select the Source .......................................................22
To Edit the Input Source Name .......................................22
PICTURE CONTROL
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Using Automatic Picture Settings ....................................23
Adjusting the Color Tone .................................................24
Adjusting the Detailed Settings........................................25
Changing the Screen Size...............................................28
Setting the Active Color ...................................................29
DNIe (Digital Natural Image engine)................................29
Freezing the Picture ........................................................30
Setting the Film Mode......................................................30
HDMI Black Level ............................................................30
Viewing Picture-in-Picture ...............................................31
SOUND CONTROL
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Customizing the Sound ...................................................33
Using Automatic Sound Settings .....................................33
Setting the TruSurround XT.............................................34
Choosing a Multi-Channel Sound (MTS) track - Digital ..34
Choosing a Multi-Channel Sound (MTS) track - Analog .35
Automatic Volume Control ...............................................35
Selecting the Internal Mute..............................................36
Setting the On/Off Melody ...............................................36
Listening to the Sound of the Sub (PIP) Picture ..............37
Resetting the Sound Settings to the Factory Defaults.....37
Connecting Headphones .................................................37
PC DISPLAY
Ŷ
Ŷ
Ŷ
Ŷ
Press
Using Your TV as a Computer (PC) Display....................44
Display Modes .................................................................44
Setting up the TV with your PC .......................................45
Setting the Home Theater PC .........................................46
TIME SETTING
FUNCTION DESCRIPTION
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Important
Note
Selecting a Menu Language............................................50
Setting the Blue Screen Mode.........................................51
Using the Game Mode.....................................................51
Viewing Closed Captions
(On-Screen Text Messages) - Analog..............................52
Viewing Closed Captions
(On-Screen Text Messages) - Digital...............................53
Menu Transparency Level ...............................................54
Using the Energy Saving Feature....................................54
Setting the Function Help ................................................55
Digital Noise Reduction ...................................................55
Using the V-Chip..............................................................56
Setting the Light Effect
(LN-T4065F / LN-T4665F / LN-T5265F) .........................63
Upgrading the Software ..................................................63
WISELINK
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
WISELINK .......................................................................64
Using the WISELINK Function ........................................64
Using the WISELINK Menu .............................................65
Using the PHOTO (JPEG) List ........................................66
Using the MP3 List ..........................................................73
Using the Setup Menu .....................................................75
About Anynet+
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
What is Anynet+?.............................................................77
Connecting Anynet+ Devices...........................................77
Setting Up Anynet+..........................................................78
Scanning and Switching between Anynet+ Devices........78
Recording ........................................................................79
Listening through a Receiver (Home theater)..................80
Check Points before Requesting Service ........................80
APPENDIX
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Symbol
Selecting the Antenna......................................................38
Clearing Scrambled Channels - Digital............................38
Setting the Channel Lists.................................................39
To set-up Your Favorite Channels ...................................40
Using the Channel Lists...................................................41
Viewing the Channel Lists ...............................................41
Labeling Channels...........................................................42
/1$/RZ1RLVH$PSOL¿HU...............................................42
Fine Tuning Analog Channels..........................................43
Checking the Digital-Signal Strength...............................43
Ŷ Setting the Clock..............................................................47
OPERATION
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
One-Touch
Button
English - 1
Troubleshooting ...............................................................81
Installing the Stand ..........................................................83
Disconnecting the Stand..................................................83
Wall-Mount Adjustment (Sold separately)........................84
Wall Mount Kit Specifications (VESA) .............................85
Using the Anti-Theft Kensington Lock .............................86
6SHFL¿FDWLRQV ..................................................................87
General Information
List of Features
Œ Adjustable picture settings that can be stored in the TV’s memory.
ΠAutomatic timer to turn the TV on and off.
ΠA special sleep timer.
ΠExcellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top/Cable Box needed.
ΠRemote Control
The supplied remote can be used to operate the TV as well as most DVD players, Set-Top boxes,
Cable Boxes and VCRs.
ΠExcellent Picture Quality
- DNIe technology provides life-like clear images.
ΠSRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Accessories
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control & Batteries (AAA x 2)
(BN59-00599A)
Power Cord
(3903-000144)
Cleaning Cloth
(BN63-01798A)
Cover-Bottom
LN-T4061F : BN63-03031A
LN-T4065F : BN63-03298A
LN-T4661F : BN63-03148A
LN-T4665F / LN-T5265F : BN63-03308A
Owner’s Instructions
Warranty Card / Registration
Card / Safety Guide Manual
(Not available in all locations)
The items color and shape may vary depending on the model.
English - 2
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
<LN-T4061F / LN-T4661F>
1
2
3
4
76
5
1 2 3
4 6
<LN-T4065F / LN-T4665F / LN-T5265F>
5
5 7
The product color and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input sources
(TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3).
In the on-screen menu, use this button as you would
use the ENTER button on the remote control.
2 MENU
Press to see an on-screen menu of your TV’s features.
3 - VOL +
Press to increase or decrease the volume.
In the on-screen menu, use the + VOL - buttons as you
ZRXOGXVHWKHŻDQGŹEXWWRQVRQWKHUHPRWHFRQWURO
4
CH
Press to change channels.
In the on-screen menu, use the < CH > buttons as you
ZRXOGXVHWKHŸDQGźEXWRQVRQWKHUHPRWHFRQWURO
5 SPEAKERS
6
(POWER)
Press to turn the TV on and off.
7 POWER INDICATOR
Blinks and turns off when the power is on and
lights up in stand-by mode.
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
English - 3
Viewing the Connection Panel
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players.
For more information on connecting equipment, see pages 6-11.
[Side Panel Jacks]
1 AUDIO OUT
Connects to the audio input jacks on your Amplifier/
Home theater.
2 DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
3 PC IN
Connects to the video and audio output jacks on
your PC.
7 COMPONENT IN 1,2
Connects Component video/audio.
8 AV IN 1 / AV IN 2
Video and audio inputs for external devices, such as a
camcorder or VCR.
S-VIDEO
Connects an S-Video signal from a camcorder or VCR.
9 POWER INPUT
Connects the supplied power cord
4 HDMI IN 1,2,3 /DVI IN(HDMI1) (AUDIO R/L)
Connects to the HDMI jack of a device with an HDMI output. 0 KENSINGTON LOCK
The Kensington lock (optional) is a device used to
Use the HDMI IN 1 jack for a DVI connection to an
physically fix the system when used in a public place.
external device.
If you want to use a locking device, contact the dealer
You should use the DVI to HDMI cable or DVI-HDMI
where you purchased the TV.
adapter (DVI to HDMI) for a video connection,and the
The place of the Kensington Lock may be different
DVI IN ‘R-AUDIO-L’ jack for audio.
depending on its model.
- The HDMI IN 1 jack does not support PC connection
!
HEADPHONE
- No sound connection is needed for an HDMI to HDMI
Connects a set of external headphones for private
connection
listening.
- When using an HDMI/DVI cable connection, you must use
@ WISELINK
the HDMI IN 1 jack.
Connect this to the jack on the optional wall mount
5 ANT 1 IN/ANT 2 IN
bracket. This will allow you to adjust the TV viewing
Connects to an antenna or cable TV system.
angle using your remote control.
6 EX LINK
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing angle
using your remote control.
English - 4
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the
TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
1 POWER
Turns the TV on and off.
2 NUMERIC BUTTONS
Press to change the channel.
3–
4
5
6
7
8
(MUTE)
Press to temporarily cut off the sound.
Displays the main on-screen menu.
0 S.MODE
Press to select the sound mode.
! RETURN
Returns to the previous menu.
@ P.MODE
Press to select the picture mode.
# CAPTION
Controls the caption decoder.
$ FAV.CH
^
&
*
Press to display all of the available
video sources.
a PRE-CH
Tunes to the previous channel.
Press to select additional channels(digital b WISELINK
and analog) being broadcast by the same
This function enables you to view and
station. For example, to select channel
play photo (JPEG) and audio files
“54-3”, press “54”, then press “–” and “3”.
(MP3) from an external device.
(Refer to page 65)
CH LIST
c REC
Used to display Channel Lists on the
This remote can be used to control
screen.
recording on Samsung recorders.
(Refer to page 79)
ANTENNA
Press to select “AIR” or “CABLE”.
d CH / CH
Press to change channels.
VCR/DVD Functions
- Rewind
e EXIT
- Stop
Press to exit the menu.
- Play/Pause
- Fast/Forward
f 83Ÿ'2:1ź/()7Ż /
5,*+7Ź / ENTER
VOL / VOL
Use to select on-screen menu items
Press to increase or decrease the
and change menu values.
volume.
9 MENU
%
) SOURCE
g INFO
Press to display information on the TV
screen.
h Anynet+
Runs the Anynet+ functions and sets
up Anynet devices.
i STILL
Press to stop the action during a
particular scene.
Press again to resume normal video.
j P.SIZE
Picture size selection.
k PIP
Picture-in Picture ON/OFF.
/
Press to switch to your favorite channels. l CH
Displays the available channels in
SLEEP
sequence. (These buttons change
Press to select a preset time interval
channels in the PIP window only.)
for automatic Shut off.
m MTS
SRS
Press to choose stereo, mono or
Selects SRS TruSurround XT mode.
Separate Audio Program
SET
(SAP broadcast).
Sets the remote to control your
TV, VCR, Cable, DVD, or Set-Top Box n RESET
When your remote does not work,
TV, DVD, STB, CABLE, VCR
change the batteries and press the
Press to operate your TV,DVD, STB,
RESET button for 2-3 seconds before
CABLE (box), or VCR
use.
(See pages 17-21)
( When pressing this button, a number
of buttons on the remote control (e.g.
TV, DVD, STB, CABLE, VCR,
VOL and CH buttons) light up for a few
seconds and then turn off to save
power. This function is convenient for
using the remote at night or when dark.
This is a special remote control for the visually impaired, and has Braille
points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.
The performance of the remote control may be affected by bright light.
English - 5
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Connections
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see "Antennas with
Ÿ)ODW7ZLQ/HDGVEHORZ
If your antenna has one lead that looks like the diagram to the right, see "Antennas with 75
Ÿ5RXQG/HDGV
If you have two antennas, see "Separate VHF and UHF Antennas".
$QWHQQDVZLWKŸ)ODW7ZLQ/HDGV
,I\RXDUHXVLQJDQRIIDLUDQWHQQDVXFKDVDURRIDQWHQQDRUUDEELWHDUVWKDWKDVŸWZLQÀDWOHDGVIROORZWKHGLUHFWLRQV
below.
1. 3ODFHWKHZLUHVIURPWKHWZLQOHDGVXQGHUWKHVFUHZVRQDŸDGDSWHU
(not supplied).
Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT 2 IN (CABLE) terminal on the back of the TV.
ANT 2 IN
(CALBE)
$QWHQQDVZLWKŸ5RXQG/HDGV
1. Plug the antenna lead into the ANT 1 IN (AIR) terminal on the back of the TV.
ANT 1 IN
(AIR)
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
UHF
VHF
2. Plug the combiner into the ANT 1 IN (AIR) terminal on the bottom of the rear panel.
ANT 1 IN
(AIR)
UHF
VHF
English - 6
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.
ANT 2 IN
(CABLE)
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled "ANT OUT", "VHF OUT" or simply, "OUT".
ANT IN
ANT OUT
2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.
ANT 2 IN
(CABLE)
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)
1. Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
ANT IN
This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN".
2. Connect this cable to a two-way splitter.
Incoming
cable
3. Connect an RF cable between the OUTPUT
terminal on the splitter and the IN terminal
on the cable box.
Incoming
cable
Splitter
Splitter
Cable Box
4. Connect an RF cable between the
ANT OUT terminal on the cable box and
the B–IN terminal on the RF(A/B) switch.
Incoming
cable
Splitter
RF (A/B)
Switch
Cable Box
5. Connect another cable between the other
OUT terminal on the splitter and the A–IN
terminal on the RF (A/B) switch.
Incoming
cable
Splitter
Cable Box
6. Connect the last RF cable between the
OUT terminal on the RF (A/B) switch and
the ANT IN terminal on the rear of the TV.
RF (A/B)
Switch
ANT IN
Incoming
cable
TV Rear
Splitter
Cable Box
RF (A/B)
Switch
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B switch to the "B" position to
view scrambled channels. (When you set the A/B switch to "B", you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)
English - 7
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 6-7). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or antenna
from the back of the TV.
ANT 1 IN ANT 2 IN
(AIR)
(CABLE)
2. Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3. Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT 1 IN (AIR) or
ANT 2 IN (CABLE) terminal on
the TV.
TV Rear Panel
VCR Rear Panel
4. Connect a Video Cable
between the VIDEO OUT jack
on the VCR and the AV IN 1
(or AV IN 2) [VIDEO] jack on
the TV.
5. Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN 1 (or AV IN 2)
[R-AUDIO-L] jacks on the TV.
If you have a “mono”
(non-stereo) VCR, use a
Y-connector (not supplied)
to hook up to the right
and left audio input jacks
of the TV. If your VCR
is stereo, you must
connect two cables.
5 Audio Cable (Not supplied)
2
4 Video Cable (Not supplied)
3 RF Cable (Not supplied)
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
S-Video Connection
Your Samsung TV can be connected to an S-Video signal from an VCR.
(This connection delivers a better picture as compared to a standard VCR.)
1. To begin, follow steps 1–3
in the previous section to
connect the antenna or
cable to your VCR and
your TV.
TV Rear Panel
VCR Rear Panel
2. Connect an S-Video Cable
between the S-VIDEO OUT
jack on the VCR and the
AV IN1 [S-VIDEO] jack on
the TV.
3. Connect Audio Cables
between the AUDIO OUT
jacks on the VCR and the
AV IN1 [R-AUDIO-L] jacks
on the TV.
3 Audio Cable (Not supplied)
2 S-Video Cable (Not supplied)
1 RF Cable (Not supplied)
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
Each VCR has a different back panel configuration.
When connecting a VCR, match the color of the connection terminal to the cable.
English - 8
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR
1. Connect a Video Cable
between the AV IN2
[VIDEO] jack on the
TV and the VIDEO OUT
jack on the camcorder.
2. Connect Audio Cables
between the AV IN2
[R-AUDIO-L] jacks on the
TV and the AUDIO OUT
jacks on the camcorder.
TV Side Panel
Camcorder
1 Video Cable (Not supplied)
2 Audio Cable (Not supplied)
Each Camcorder has a different back panel configuration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
Connecting a DVD Player or Set-Top/Cable Box
The rear panel jacks on your TV make it easy to connect a DVD player or Set-Top/Cable box to your TV.
1. Connect a Component
TV Rear Panel
Cable between the
COMPONENT IN(1 or 2)
[Y, PB, PR] jacks on the TV
and the COMPONENT
DVD Player or Set-Top/Cable Box
[Y, PB, PR] jacks on the
DVD player or Set-Top/Cable
Box.
2. Connect Audio Cables
between the COMPONENT
IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the
AUDIO OUT jacks on the
DVD player or Set-Top/Cable
Box.
2
Audio Cable (Not supplied)
1
Component Cable (Not supplied)
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and
Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections.
For example, if connecting the video cable to COMPONENT IN, connect the audio cable
to COMPONENT IN also.
Each DVD Player and Set-Top/Cable box has a different back panel configuration.
When connecting a DVD player or Set-Top/Cable box, match the color of the connection
terminal to the cable.
English - 9
Connecting a DVD Player or Set-Top/Cable Box via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
1. Connect an HDMI Cable
between the HDMI IN
(1,2 or 3) jack on the
TV and the HDMI jack
on the DVD player or SetTop/Cable Box.
Side Panel Jacks
DVD Player, Set-Top/Cable Box Rear Panel
TV Rear Panel
or
HDMI Cable (Not supplied)
What is HDMI?
• HDMI(High-Definition Multimedia Interface), is an interface that
enables the transmission of digital audio and video signals using a single cable
• The difference between HDMI and DVI is that the HDMI device is smaller in size and
has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed
Each DVD player and or Set-Top/Cable box has a different back panel configuration.
Connecting a DVD Player or Set-Top/Cable Box via DVI
This connection can only be made if there is a DVI Output connector on the external device.
1. Connect a DVI to HDMI
Cable or DVI-HDMI Adapter
between the HDMI IN 1
jack on the TV and
the DVI jack on the
DVD player or Set-Top/Cable
Box.
TV Rear Panel
DVD Player, Set-Top Box
2. Connect Audio Cables
between the DVI IN (HDMI 1)
[R-AUDIO-L] jack on the
TV and the AUDIO OUT jacks
on the DVD player or
Set-Top/Cable Box.
2
1
Audio Cable (Not supplied)
DVI to HDMI Cable (Not supplied)
Each DVD player and Set-Top/Cable Box has a different back panel configuration.
When connecting a DVD player or Set-Top/Cable Box, match the color of the connection terminal
to the cable.
When using an HDMI/DVI cable connection,you must use the HDMI IN1 jack.
English - 10
&RQQHFWLQJD'LJLWDO$XGLR6\VWHP
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1. Connect an Optical Cable
between the “DIGITAL
AUDIO OUT (OPTICAL)”
jacks on the TV and the
Digital Audio Input jacks on
the Digital Audio System.
When a Digital Audio
System is connected to the
“DIGITAL AUDIO OUT
(OPTICAL)” terminal:
Decrease the volume
of the TV, and adjust the
volume level with the
system’s volume control.
'LJLWDO$XGLR6\VWHP
795HDU3DQHO
Optical Cable (Not supplied)
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
Each Digital Audio System has a different back panel configuration.
&RQQHFWLQJDQ$PSOL¿HU'9'+RPH7KHDWHU
1. Connect Audio Cables
between the AUDIO OUT
[R-AUDIO-L] on the TV
and AUDIO IN [R-AUDIOL] on the Amplifier/DVD
Home Theater.
795HDU3DQHO
$PSOL¿HU'9'+RPH7KHDWHU
When an audio amplifier is
connected to the "AUDIO
OUT [L-AUDIO-R]"
terminals: Decrease the
volume of the TV, and adjust
the volume level with the
Amplifier’s volume control.
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel configuration.
When connecting an Amplifier/DVD Home Theater, match the color of the connection
terminal to the cable.
&RQQHFWLQJD3&
8VLQJWKH'6XE&DEOH
795HDU3DQHO
8VLQJWKH'6XE&DEOH
1. Connect a D-Sub
Cable between PC IN
[PC] connector on
the TV and the PC
output connector on
your computer.
2. Connect a PC Audio
Cable between PC IN
[AUDIO] jack on the
TV and the Audio Out
jack of the sound card
on your computer.
3&
2
3&$XGLR&DEOH1RWVXSSOLHG
'6XE&DEOH1RWVXSSOLHG
795HDU3DQHO
8VLQJWKH+'0,'9,&DEOH
8VLQJWKH+'0,'9,&DEOH
1. Connect a HDMI/DVI
cable between the
HDMI1/DVI IN jack on
the TV and the PC output
jack on your computer.
2. Connect a 1Stereo/2RCA
cable between the DVI
IN [L-AUDIO-R] jack on
the TV and the Audio Out
jack of the sound card on
your computer.
3&
2
6WUHR5&$&DEOH1RWVXSSOLHG
+'0,'9,&DEOH1RWVXSSOLHG
Each PC has a different back panel configuration.
When connecting a PC, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection,you must use the HDMI IN1 terminal.
(QJOLVK
Operation
Turning the TV On and Off
Press the POWER
You can also use the
button on the remote control.
button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
Menu language, Shop Mode,
Channels and Time will be set.
1. Press the POWER button on the remote control.
The message “Menu language, Shop Mode, Channels and Time will be set.” is
displayed.
Press the ENTER button, then “Select the language of the OSD” menu
is automatically displayed.
Start
Plug & Play
Select the language of the OSD.
Menu Language :
English
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFWODQJXDJHWKHQSUHVVWKHENTER button.
The message “Select Home Mode when installing this TV at home.” is displayed.
Español
Français
3. 3UHVVWKHŻRUŹEXWWRQVWRVHOHFW³6KRS´RU³+RPH´WKHQ
press the ENTER button.
The message “Select the antennas to memorize.” is displayed.
We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic
(Home) mode, press any Volume button and then hold down the MENU button
for five seconds on the side panel of the TV.
4. 3UHVVWKHŸRUźEXWWRQVWRPHPRUL]HWKHFKDQQHOVRIWKHVHOHFWHGFRQQHFWLRQ
Press the ENTER button to select “Start”.
If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to
ANT 2 (CABLE), select “Cable”.
Move
Enter
Skip
Plug & Play
Select Home Mode when installing this TV at home.
Shop
Home
Move
Enter
Skip
Plug & Play
Select the antennas to memorize.
Air
Start
Cable
Start
Air+Cable
Start
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.
In Cable mode, you can select the correct signal source among STD, HRC,
DQG,5&E\SUHVVLQJWKHŸRUźEXWWRQWKHQSUHVVWKHENTER button.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
Move
Enter
Auto Program in progress.
5. The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The message “Select the clock mode.” is displayed.
To stop the search before it has finished, press the ENTER button with stop
selected.
Skip
Plug & Play
Air Channel 50
35%
Stop
Enter
Skip
Plug & Play
Auto Program is incomplete.
16 Channels were memorized.
Air : 16, Cable : 0.
OK
6. Press the ENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³0DQXDO´RU³$XWR´WKHQ3UHVVWKH
ENTER button.
The message “Set to daylight savings time.” is displayed.
Enter
Clock Set
Select the clock mode.
Clock Mode
Move
English - 12
Skip
Plug & Play
:
Manual
Auto
Enter
Skip
7. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³1R´RU³<HV´WKHQSUHVVWKHENTER button.
The message “Select the time zone in which you live.” is displayed.
Plug & Play
Set the daylight savings time.
Daylight Savings Time
8. 3UHVVWKHŸRUźEXWWRQVWRKLJKOLJKWWKHWLPH]RQHIRU\RXUORFDODUHD
Press the ENTER button. If you have received a digital signal, the time will be set
automatically.
If not, see page 48 to set the clock.
Move
:
No
Yes
Enter
Exit
Plug & Play
Select the time zone in which you live.
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
9. The message “Enjoy your watching.” is displayed.
When you have finished, press the ENTER button.
Move
Enter
Exit
Enjoy your watching.
OK
TV
If you want to reset this feature...
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
2. Press the ENTER button again, to select "Plug & Play".
3. The message “Menu language, Shop Mode, Channels and Time will be set.”
is displayed.
Setup
Plug & Play
Language
Time
Game Mode
V-Chip
Caption
Menu TransParency
źMore
Move
: English
: Off
: High
Enter
Menu language, Shop Mode,
Channels and Time will be set.
Start
Changing Channels
Using the Channel Buttons
1. Press the CH
or CH
button to change channels.
When you press the CH or CH button, the TV changes channels in
sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels). You will not see channels that were either
erased or not memorized. See page 16 to memorize channels.
Using the PRE-CH Button to select the Previous Channel
1. Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then
use the PRE-CH button to quickly alternate between them.
English - 13
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Adjusting the Volume
1. Press the VOL
or VOL
buttons to decrease or increase the volume.
Using Mute
At any time, you can cut off the sound using the MUTE button.
1. Press MUTE button and the sound cuts off.
The word "
" will appear in the lower-left corner of the screen.
2. To turn mute off, press the MUTE button again, or simply press the
VOL or VOL buttons.
Viewing the Display
7KHGLVSOD\LGHQWL¿HVWKHFXUUHQWFKDQQHODQGWKHVWDWXVRIFHUWDLQDXGLRYLGHRVHWWLQJV
1. Press the INFO button on the remote control.
Air 7
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
Mono
Picture Mode : Dynamic
Sound Mode : Custom
MTS : Stereo
05 : 54 pm
Press the INFO button once more or wait approximately 10 seconds and the
display disappears automatically.
English - 14
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has five icons:
Picture, Sound, Channel, Setup, Input.
TV
Input
Source List
: TV
Edit Name
WiSELINK
Anynet+ (HDMI-CEC)
2. 8VHWKHŸRUźEXWWRQVWRVHOHFWRQHRIWKHILYHLFRQV
Then press the ENTER button to access the icon’s sub-menu.
Ź
Ź
Ź
3. Press the EXIT button to exit.
Move
Enter
Exit
The on-screen menus disappear from the screen after about one minute.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CH or CH buttons to scan through the channels. This eliminates the need to change
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
TV
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHOWKHQSUHVVWKHENTER button.
Channel
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move
TV
2. Press the ENTER button select “Antenna”.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³$LU´RU³&DEOH´WKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
Return
Channel
Antenna
: Air
Air
Auto Program
Cable
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move
English - 15
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Enter
Return
Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&KDQQHO´WKHQSUHVVWKHENTER button.
TV
Channel
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW$XWR3URJUDPWKHQSUHVVWKHENTER button.
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKHDQWHQQDFRQQHFWLRQWKHQSUHVVWKH
ENTER button.
Enter
TV
Air
Start
Cable
Start
Air+Cable
Start
Move
Move
STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point the signal source has been selected.
Enter
Enter
TV
Return
Return
Auto Program
Selects a cable system.
Analog
STD
HRC
IRC
Start
Digital
STD
HRC
IRC
Move
Move
Press the ENTER button to start the auto program.
To stop the search before it has finished, press the ENTER button with stop
selected.
Return
Channel
Select the antennas to memorize.
Air: “Air” antenna signal. / Cable: “Cable” antenna signal. /
Air+Cable: “Air” and “Cable” antenna signals.
4. When selecting the Cable TV system : Press the ENTER button to start the auto
program. By default, the cable TV system is set to “STD”. If you want to select
DQRWKHUW\SHRIFDEOHV\VWHPSUHVVWKHŸRUźEXWWRQWRVHOHFW
“STD”, “HRC” or “IRC”.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Enter
Enter
Return
Return
Auto Program
Auto Program in Progress.
Cable Channel 50
50%
5. After all the available channels are stored, the “Auto Program” menu reappears.
Press the EXIT button to exit.
Stop
Enter
Return
Plug & Play
Auto Program is complete.
16 Channels were memorized.
Air : 16, Cable : 0.
OK
Enter
English - 16
Return
Setting Up Your Remote Control
After the television has been set up properly, your remote control can operate in five
different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button
on the remote control allows you to switch between these modes, and control
whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and
Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1.
Turn off your VCR.
2.
Press the VCR button on your TV’s remote control.
3.
Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the VCR code
listed on page 19 of this manual for your brand of VCR. Make sure you enter three digits
of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
5.
Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your
TV’s volume.
Setting Up the Remote to Operate Your Cable Box
1.
Turn off your cable box.
2.
Press the CABLE button on your TV’s remote control.
3.
Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the cable box code
listed on page 20 of this manual for your brand of cable box. Make sure you enter three
digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try
the first one.)
5.
Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of cable box. If no other codes are listed, try each code,
000 through 046.
Note on Using Remote Control Modes: Cable Box
When your remote control is in “CABLE” mode, the volume buttons still control your
TV’s volume.
English - 17
Setting Up the Remote to Operate Your DVD
1.
Turn off your DVD.
2.
Press the DVD button on your TV’s remote control.
3.
Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the DVD code
listed on page 20~21 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5.
Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in “DVD” mode, the volume buttons still control your
TV’s volume.
Setting Up the Remote to Operate Your STB
1.
Turn off your STB.
2.
Press the STB button on your TV’s remote control.
3.
Press the SET button on your TV’s remote control.
4.
Using the number buttons on your remote control, enter three digits of the STB code
listed on page 21 of this manual for your brand of STB.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5.
Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other
codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)
Note on Using Remote Control Modes: STB
When your remote control is in “STB” mode, the volume buttons still control your
TV’s volume.
English - 18
Remote Control Codes
VCR
Brand
SAMSUNG
ADMIRAL
AIWA
AKAI
AUDIO DYNAMICS
BELL&HOWELL
BROKSONIC
CANDLE
CANON
CITIZEN
COLORTYME
CRAIG
CURTIS MATHES
DAEWOO
DB
DIMENSIA
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GENERAL ELECTRIC
GO VIDEO
HARMAN KARDON
HITACHI
INSTANT REPLAY
JC PENNEY
JCL
JVC
KENWOOD
KLH
KONIA
LG(Goldstar)
LIOYD
LOGIK
LXI
MAGNAVOX
MARANTZ
MARTA
MEI
MEMOREX
MGA
MIDLAND
MINOLTA
MITSUBISHI
Code
000 001 002 003 004 005 077 078 079
020
025
004 027 032
007 026
018
022
002 003 006 008 015 055
021 056
002 003 006 008 015 055
007
002 024
002 007 008 017 021 025 056 064 066
003 010 011 012 013 014 015 016
007 026
017
025
034
001 003 006 021 022 025 030 032 034 040
047 050 052 060 063 065 066 067 069 073
018 024 028 029 048 051 061
025
002 005 017 021 056
002
007
019 025 041 042 074
021
002 007 018 019 021 026 037 041 054 056
007 008 018 021 026 037
081 082 083
007 008 018 021 026 037
070
036
006 007 008 009 010
025
038
025
021 056 059
007 008 018 021 026 037 062
006
021
006 021 024 025
034
005
019 041 075
019 034 041 046
Brand
MONTGOMERY WARD
MTC
MULTITECH
NEC
OPTIMUS
ORION
PANASONIC
PENTAX
PENTEX RESEARCH+
PHILCO
PHILIPS
PIONEER
PORTLAND
PROSCAN
QUARTZ
QUASAR
RADIO SHACK/
REALISTIC
RCA
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHIMTOM
SIGNATURE
SONY
SYLVANIA
SYMPHONIC
TANDY
TASHIKA
TATUNG
TEAC
TECHNICS
TEKNIKA
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
English - 19
Code
020
002 025
002 005 025 038
007 008 018 026 037 062 064
020
073 074 075 076
021 056 071 072
019 041 075
008
021 056 059
021 080
019 026 039 053
015 049 055
017
018
021 056
006 018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
026
018 024
003 047 052 067
006 018 019 024 028 029 041 048 051
020 034 045 015
027 033 038 058
025
027 033 044
021 025 056 059
025
018 025
006
037
025 037 068
021
006 021 025 031
066
003 019 029 051 052
002 006
002
007 026
026
007 026
002
002 003 006 019 020 021 024 025 034 038 041
007 008 018 026 037
023 027 033
CABLE BOX
Brand
SAMSUNG
GI
HAMLIN
HITACHI
JERROLD
MACOM
MAGNAVOX
OAK
PANASONIC
PHILIPS
PIONEER
RCA
REGAL
Code
000 001
041
003 024
025 030
038 039
025 030
019 023
026
003 022
019 021
004 018
014 022
003
002 003 004 005 006 007
031
028
027 037 044
023 028
020 044
040
Brand
REGENCY
SA
SCIENTIFIC ATLAN
SPRUCER
STARGATE 2000
SYLVANIA
TEXSCAN
TOCOM
UNIVERSAL
VIEWSTAR
WARNER AMEX
ZENITH
Code
015 023
042 043
042 043
022
036
016
016
032
033 034
019 021 023 028
046
017 029 035 037 045
SAMSUNG DVD
Product
DVD
DVDR
BD Record
VCR COMBO
VCR Record
DHR COMBO
Code
000 001 002
003 004
005 006
007 008 009 010 011
012
013
Product
Home Theater VCR COMBO
HDD Recorder COMBO
TWIN TRAY COMBO
STB DVD COMBO
DVD Receiver
AV Receiver
Code
030
075
085
072
070 071 074 086 083 084 088 111 112
114
062
074
122 123
027
077 078 079 082
080 125
081
065
095
066
146
067 068
090
060
061 089 133 135
069 074
074
064 113
071
073
091 110
089
Brand
INTEGRA
JBL
JVC
JATON
KENWOOD
KISS
KONKA
KLH
LG(Goldstar)
LOEWE
LASONIC
MOBILE AUTHORITY
MEMOREX
MALATA
MAGNAVOX
MINTEK
MONYKA
NORCENT
NEXT BASE
NEC
NANTAUS
NESA
OPTOMEDIA ELECTRONICS
OPTIVIEW
ONKYO
PHILCO
PRINCETON
PROSCAN
Code
014 015 016
017
018
019
020
021
DVD
Brand
ANAM
AUDIOVOX
AUDIOLOGIC
ANABA
APEX DIGITAL
AIWA
BROKSONIC
BLAUPUNKT
B&K
CURTIS MATHES
CYBER HOME
CLARION
CIRRUS
CYBER HOME
CINEVISION
DAEWOO
DENON
FARENHEIT
FISHER
GPX
GO VIDEO
GE
GREENHILL
HITACHI
HITEKER
HOYO
HARMAN / KARDON
IRT
English - 20
Code
092
091
022 033
073
051 108
073
059 100
074 075
025 031
057
058
054
055
056
076 093
074 094
073
048 049
052
053
144
074
105
072
076 092
044 045
046 047
023
115 116
109
106 107
050
119
DVD
Brand
PANASONIC
PHILIPS
ROTEL
RIO
RCA
RAITE
ROWA
SAMPO
SONY
SHERWOOD
SVA
SYLVANIA
SHARP
SANSUI
SANYO
SHINSONIC
Code
024 034 124 134 136 137 138
036 076
117 118
120
023 035 074 075 131 132
073
038
104
026 029 126 127 128 129 130 141
039 041
042
043 093
140
062
062 090
094
Brand
THOMSON
TOSHIBA
TECHNICS
TVIEW
TOKAI
TEAC
TECHWOOD
TREDEX
URBAN CONCEPTS
VENTURER
VOCOPRO
YAMAHA
YAMAKAWA
XWAVE
ZENITH
Code
145
028 062 076
139
072
073
096
097
098 099 101
076
075
102
032 063
040 073
103
076 121
SAMSUNG SET-TOP BOX
Product
Ground wave STB
Satellite STB
CABLE STB
STB DVD COMBO
Satellite STB HDD COMBO Standard
Code
001 002
003
004
008
009
Product
Satellite STB HDD COMBO Premium
CABLE STB HDD COMBO Standard
CABLE STB HDD COMBO Premium
Ground wave STB HDD COMBO Standard
Ground wave STB HDD COMBO Premium
Code
010
011
012
013
014
SET-TOP BOX
Brand
ALPHASTAR
ANAM
CHANNEL MASTER
CROSSDIGITAL
CHAPARRAL
DIRECT TV
DAEWOO
DISH NETWORK SYSTEM
DISHPRO
DRAKE
DX ANTENNA
ECHOSTAR
EXPRESSVU
GOI
GE
GENERAL INSTRUMENT
HTS
HOME CABLE
HITACHI
HUGHES NETWORK
IQ
IQ PRISM
JANEIL
JERROID
JVC
LG(Goldstar)
Code
023
043
018 034
019
035
015 016
065 066
074
069 070
069
018 024
027
025 069
069
069
065
046 047
069
056
022
015 017
020
020
059
063
069 070
044 073
017 019 022 045 060 061 062
067 068
032
070 071
048 063 064
Brand
MAGNAVOX
MEMOREX
MOTOROLA
MACOM
MITSUBISHI
NEXT LEVEL
PHILIPS
PRIMESTAR
PANASONIC
PAYSAT
PROSCAN
RCA
RADIOSHACK
REALISTIC
STAR TRAK
STS
SKY
SKY LIFE
SHACK
STAR CHOICE
SONY
TOSHIBA
ULTIMATE TV
UNIDEN
ZENITH
English - 21
Code
016 021
016
064
018
015
047 048
015 016
041 042
046 049
058 059
016
065 066
051 052
064
057
026
020 027
031
005 006
064
064
054 060
015 017
060 066
016 021
024 031
036 038 039 040 041 042
064
017 021 033 036 038 039 040
067
050 063
061 062
053 065 066
007
028 029 030 072
037 055 056 057
068
To Select the Source
Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice.
TV
Input
Ź
Ź
Source List
: TV
Edit Name
WISELINK
Anynet+ (HDMI-CEC)
1. Press the MENU button to display the menu.
3UHVV WKHŸRUźEXWWRQVWRVHOHFW³,QSXW´WKHQSUHVVWKHENTER button.
2. Press the ENTER button to select "Source List".
3UHVVWKHŸRUźEXWWRQVWRVHOHFWVLJQDOVRXUFHWKHQSUHVVWKHENTER button.
When you connect equipment to the LCD, you can choose between the
following sets of jacks: TV, AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, HDMI2, HDMI3 on the TV’s rear panel.
HDMI1, HDMI2, HDMI3 input can only be selected when the external device is
turned on and connected via HDMI.
AV2/S-Video2/HDMI3 is located on the side of the TV.
Move
TV
Return
Source List
TV
AV1
AV2
S-Video1
S-Video2
Component1
Component2
źMore
You can choose only those external devices that are connected to the TV.
Enter
Move
: ---: ---: ---: ---: ---: ----
Enter
Return
Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
3UHVV WKHŸRUźEXWWRQVWRVHOHFW³,QSXW´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW(GLW1DPHWKHQSUHVVWKHENTER button.
TV
Input
Move
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW$9$969LGHR69LGHR
"Component1", "Component2", "PC", "HDMI1", "HDMI2", "HDMI3" input jack, then
press the ENTER button.
Ź
Ź
Source List
: TV
Edit Name
WISELINK
Anynet+ (HDMI-CEC)
TV
Enter
Return
Edit Name
AV1
AV2
S-Video1
S-Video2
Component1
Component2
: ---: ---: ---: ---: ---: ----
źMore
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW9&5'9''9+6&DEOH67%
"HD STB", "Satellite STB", "PVR STB", "AV Receiver", "DVD Receiver",
"Game", "Camcorder", "DVD Combo", "PC", "VOD STB", "TV" input source, then
press the ENTER button.
Press the EXIT button to exit.
TV
Enter
Return
Edit Name
AV1
AV2
S-Video1
S-Video2
Component1
Component2
źMore
: -------: ----VCR
: ----DVD
: ----D-VHS
: ----Cable STB
: ---HD STB
Satellite STB
PVR STB
ź
Move
English - 22
Enter
Return
Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard", "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
TV
Picture
Mode
Contrast
Brightness
Sharpness
Color
Tint
G 50
Balck light
ź0RUH
Move
Enter
TV
2. Press the ENTER button to select "Mode".
3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKH'\QDPLF6WDQGDUG0RYLHSLFWXUH
setting. Press the ENTER button.
Return
Picture
Mode
Contrast
Brightness
Sharpness
Color
Tint
G 50
Balck light
ź0RUH
ΠChoose Dynamic to increase the clarity and sharpness of the picture.
ΠChoose Standard for the standard factory settings.
ΠChoose Movie for a natural Image without picture enhancements.
Ź
100
50
85
55
R 50
100
: Dynamic
: Dynamic
Dynamic
Standard
Movie
Move
Enter
100
50
85
55
R 50
10
Return
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW&RQWUDVW%ULJKWQHVV6KDUSQHVV
"Color", or "Tint(G/R)", then press the ENTER button.
4. 3UHVVWKHŻRUŹEXWWRQVWRGHFUHDVHRULQFUHDVHWKHYDOXHRIDSDUWLFXODULWHP
)RUH[DPSOHLI\RXVHOHFW&RQWUDVWSUHVVLQJWKHŹEXWWRQLQFUHDVHVLW
Press the ENTER button.
TV
Picture
Mode
Contrast
Brightness
Sharpness
Color
Tint
G 50
Balck light
ź0RUH
Press the EXIT button to exit.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint(G/R)
the OSD will be adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available.
Move
Enter
Ÿ
Contrast
ź
English - 23
Return
50
Move
Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
Ź
100
50
85
55
R 50
10
: Dynamic
Adjust
Return
Activating Backlight
TV
You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. 3UHVVWKHŸRUźEXWWRQWRVHOHFW³%DFNOLJKW´WKHQSUHVVWKHENTER button.
3. Press the ŻRUŹ button to decrease or increase the valueof the backlight
brightness.
Press the ENTER button.
Press the EXIT button to exit.
Picture
Mode
Contrast
Brightness
Sharpness
Color
Tint
G 50
Balcklight
ź0RUH
Ź
100
50
85
55
R 50
10
: Dynamic
Move
Enter
Ÿ
Balcklight
ź
Return
5
Move
Adjust
Return
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
TV
2. 3UHVVWKHŸRUźEXWWRQWRVHOHFW&RORU7RQHWKHQSUHVVWKHENTER button.
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFW&RRO&RRO1RUPDO:DUP or "Warm2".
Press the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2
cannot be selected. Movie mode is only available.
Picture
Ÿ0RUH
Color Tone
'HWDLOHGVHWWLQJV
Size
Digital NR
Active Color
DNle
5HVHW
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
Move
TV
1. 3UHVVWKHŸRUźEXWWRQWRVHOHFW5HVHWWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQWRVHOHFW³&DQFHO´RU³2.´WKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
Each mode can be reset.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Picture
Cool2
: Cool2
Cool1
Normal
: 16 : 9
Warm1
: Low
Warm2
: On
: On
: OK
Move
Enter
Return
Picture
Ÿ0RUH
Color Tone
Detailed settings
Size
Digital NR
Active Color
DNle
Reset
Move
English - 24
Enter
Ÿ0RUH
Color Tone
Detailed settings
Size
Digital NR
Active Color
DNle
Reset
TV
Resetting the Picture Settings to the Factory Defaults
: Cool2
: 16 : 9
: Low
: On
: On
2.
: Cool2
: 16 : 9
: Low
: On
: Off
OK
Cancel
: OK
Enter
Return
Adjusting the Detailed Settings
You can set Detailed picture settings.
Activating Detailed Settings
TV
2. Press the ENTER button to select “Mode”
3UHVVWKHŸRUźEXWWRQWRVHOHFW³0RYLH´WKHQSUHVVWKHENTER button.
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFW³'HWDLOHGVHWWLQJV´WKHQSUHVVWKH
ENTER button.
Picture Mode is available in Standard or Movie mode.
If DNIe is Off, the Detailed Settings cannot be selected when the Picture mode
is in Standard mode.
Picture
Mode
Contrast
Brightness
Sharpness
Color
Tint
G 50
Balcklight
ź0RUH
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
: Movie
Move
Enter
TV
TV
: 16 : 9
: Low
: On
: On
: OK
Enter
5. Press the ŸRUź button to select “Off”,“Low”,“Medium”,“High”.
Press the ENTER button.
Move
ΠOff: Turns off the black adjustment function.
ΠLow: Sets the black color depth to low.
ΠMedium: Sets the black color depth to medium.
ΠHigh: Sets the black color depth to high.
TV
TV
7. Press the ŸRUź button to select “Off”,“Low”,“Medium”,“High”.
Press the ENTER button.
TV
: Off
: Off
: Off
: Off
:0
: Auto
: Off
: Off
Enter
Return
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Move
English - 25
Return
Detailed Settings
Move
ΠOff: Turns off the dynamic contrast adjustment function.
ΠLow: Sets the dynamic contrast to low.
ΠMedium: Sets the dynamic contrast to medium.
ΠHigh: Sets the dynamic contrast to high.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: Off
Off
: Off
Low
: 0 Medium
High
: Auto
Enter
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
6. Press the ŸRUź button to select “Dynamic Contrast”, then press the
ENTER button.
: Off
: Off
Enter
Move
You can adjust the screen contrast so that the optimal contrast is provided.
: Off
: Off
:0
: Auto
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Activating Dynamic Contrast
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
4. Press the ŸRUź button to select “Black adjust”, then press the ENTER button.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: Cool2
Move
You can directly select the black level on the screen to adjust the screen depth.
Return
Picture
Ÿ0RUH
Color Tone
Detailed settings
Size
Digital NR
Active Color
DNle
Reset
Activating Black adjust
Ź
100
50
85
55
R 50
10
: Off
: Off
Off
: 0 Low
Medium
: Auto
High
: Off
: Off
Enter
Return
Activating Gamma
TV
Detailed Settings
You can adjust the middle brightness of pictures. (-3 ~ 3)
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
8. Press the ŸRUź button to select “Gamma”, then press the ENTER button.
9. Press the ŻRUŹ button to decrease or increase the value of a particular item.
Press the ENTER button.
Move
: Off
: Off
Enter
Return
0
Gamma
Adjust
TV
Changing the Color Space
10. Press the ŸRUź button to select “Color Space”, then press the ENTER button.
11. Press the ŸRUź button to select “Auto” or “Wide”.
Press the ENTER button.
Move
ΠWide : Wide Color Space offers deep and rich color tone.
ΠAuto : Auto Color Space automatically adjusts to the most natural color tone based on
program sources.
TV
TV
13. 6HOHFWWKHUHTXLUHGRSWLRQE\SUHVVLQJWKHŸRUźEXWWRQWKHQSUHVVWKH
ENTER button.
14. 3UHVVWKHŻRUŹEXWWRQWRGHFUHDVHRULQFUHDVHWKHYDOXHRIDSDUWLFXODULWHP
Press the ENTER button.
ΠR offset: Adjusts the red color darkness.
ΠG offset: Adjusts the green color darkness.
ΠB offset: Adjusts the blue color darkness.
ΠR gain: Adjusts the red color brightness.
ΠG gain: Adjusts the green color brightness.
ΠB gain: Adjusts the blue color brightness.
ΠReset: The previously adjusted white balance will be reset to the factory defaults.
: Off
: Off
:0
: Auto
Auto
Wide
: Off
: Off
Return
Detailed Settings
Move
TV
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: Off
: Off
:0
: Auto
: Off
: Off
Enter
Return
White Balance
R offset
G offset
B offset
R gain
G gain
B gain
Reset
15
15
15
15
15
15
Move
Changing the adjustment value will refresh the adjusted screen.
Enter
Ÿ
R-Offset
ź
Return
15
Move
English - 26
Return
Enter
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
12. Press the ŸRUź button to select “White Balance”, then press the ENTER
button.
: Off
: Off
Enter
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
You can adjust the color temperature for more natural picture colors.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: Off
: Off
:0
: Auto
Detailed Settings
Move
Activating White Balance
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Color space is a color matrix composed of red, green, and blue colors.
Select your favorite color space to experience the most natural color.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: Off
: Off
:0
: Auto
Adjust
Return
Activating My Color Control
TV
15. Press the ENTER button to select “My Color Control”.
16. Press the ŸRUź button to select “Pink”,“Green”,“Blue”,“White”,“Reset”.
Press the ENTER button.
17. 3UHVVWKHŻRUŹEXWWRQWRGHFUHDVHRULQFUHDVHWKHYDOXHRIDSDUWLFXODULWHP
Press the ENTER button.
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Thissetting can be adjusted to suit your personal preferences. When using the My Color
Control Feature, the current picture remains in movement.
Move
TV
: Off
: Off
Enter
Return
My Color Control
Pink
Green
Blue
White
Reset
ΠPink: Darkens or lightens the pink color
ΠGreen: Darkens or lightens the green color
ΠBlue: Darkens or lightens the blue color
ΠWhite: Darkens or lightens the white color
ΠReset: The previously adjusted colors will be reset to the factory defaults.
Changing the adjustment value will refresh the adjusted screen.
15
15
15
15
Move
Enter
Return
Ÿ
Pink
ź
15
Move
Activating Edge Enhancement
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: Off
: Off
:0
: Auto
Adjust
TV
You can emphasize object boundaries in the picture.
Return
Detailed Settings
Black adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
18. Press the ŸRUź button to select “Edge Enhancement”, then press the
ENTER button.
19. Press the ŸRUź button to select “Off” or “On”.
Press the ENTER button.
Move
TV
: Off
: Off
:0
: Auto
: Off
: Off
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Detailed Settings
Black adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Move
: Off
: Off
:0
: Auto
: Off
Off
On
: Off
Enter
Ź
Return
Activating XVYCC
The traditional TVs couldn’t clearly implement sharp, solid, and texture images.This TV
can implement those effects using the xvYCC signals, which support extended color
space. The traditional TVs couldn’t also implement part of colors for movie contents.
This TV can implement the same colors as in the films using the xvYCC signals.
Accordingly you can enjoy powerful color presentation of movies with your TV.
TV
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
20. Press the ŸRUź button to select “XVYCC”, then press the ENTER button.
21. Press the ŸRUź button to select “Off” or “On”.
Press the ENTER button.
Move
Press the EXIT button to exit.
TV
: Off
: Off
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Detailed Settings
Black Adjust
Dynamic Contrast
Gamma
Color Space
White Balance
My Color Control
Edge Enhancement
XVYCC
Move
English - 27
: Off
: Off
:0
: Auto
: Off
: Off
:0
: Auto
: Off
Off
On
: Off
Enter
Ź
Return
Changing the Screen Size
Occasionally, you may want to change the size of the image on your screen. Your TV comes with six screen size options, each designed to
ZRUNEHVWZLWKVSHFL¿FW\SHVRIYLGHRLQSXW<RXUFDEOHER[RUVDWHOOLWHUHFHLYHUPD\KDYHLWV
TV
Picture
own set of screen sizes as well.
Ÿ0RUH
Color Tone : Cool2
Detailed settings
Size
: 16 : 9
Digital NR
: Low
Active Color : On
DNle
: On
Reset
: OK
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW6L]HWKHQSUHVVWKHENTER button.
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKHVFUHHQIRUPDW\RXZDQW
Press the ENTER button.
Press the EXIT button to exit.
• 16:9 : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom2 :Magnifies the size of the picture more than “Zoom1”.
• Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
• 4:3 : Sets the picture to 4:3 normal mode.
• Just Scan : Use the function to see the full image without any cutoff
when HDMI 720p/1080i/1080p signals are input.
TV
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Size
16 : 9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan
Move
Ź
Ź
Ź
Enter
Return
Alternately, you can press the P.SIZE button on the remote control repeatedly to
change the picture size.
If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image
may be burned onto the screen. View the TV in 16:9 mode as much as possible.
HD (High Definition)
16:9 - 1080i/1080p (1920x1080), 720P (1280x720)
16:9
Sets the picture to 16:9 wide mode.
Wide Fit
Enlarges the aspect ratio of the
SLFWXUHWR¿WWKHHQWLUHVFUHHQ
Zoom1
The screen size when Wide screen
is vertically enlarged.
Zoom2
The screen size when the Zoom1
screen is vertically enlarged.
4:3
Sets the picture to 4:3
normal mode.
Just Scan
Use the function to see the full image
without any cutoff when HDMI
(720p/1080i/1080p) or DTV (1080i)
signals are input.
• In TV, VIDEO, S-VIDEO, and all COMPONENT (480i, 480p) modes, all screen modes can be selected.
(16:9 • Zoom1 • Zoom2 • 4:3).
• You can select only the 16:9, 4:3 and Wide Fit screen sizes in the DTV Component (720p, 1080i) or HDMI (720p, 1080i) mode.
• In PC modes, only 16:9 & 4:3 modes can be selected.
• You must select Zoom with P. Size button on the remote if you want to move the Zoom 1or 2 picture up or down.
• When watching a DTV’s HD signal, you can use Wide Fit. Horizontal zoom (Wide Fit) sets the optical picture format by
expanding it both horizontally and vertically. For example, you can reset the picture in 4:3 format to 16:9. Wide Fit does not
support all external devices (DVD, VCR etc.).
• Some cable boxes and satellite receivers have their own set of screen sizes, which may differ from the ones above.
English - 28
Setting the Active Color
If you turn on this option, the colors of the sky and grass will be stronger and clearer for a more vivid on-screen picture.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
TV
Picture
Ÿ0RUH
Color Tone : Cool2
Detailed settings
Size
: 16 : 9
Digital NR
: Low
Active Color : On
DNle
: On
Reset
: OK
2. 3UHVVWKHŸRUźEXWWRQWRVHOHFW$FWLYH&RORUWKHQSUHVVWKHENTER button.
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFW2IIRU2Q
Press the ENTER button.
Press the EXIT button to exit.
Picture Mode is available only in Dynamic mode.
Move
TV
TV
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Picture
Picture
Ÿ0RUH
Color Tone : Cool2
Detailed settings
Size
: 16 : 9
Digital NR
: Low
Active Color : Off
Off
DNle
: Off
On
: OK
Reset
Move
Enter
Move
Enter
Return
Return
DNIe (Digital Natural Image engine)
This TV includes the the DNIe function to provide high visual quality. If you set DNIe to on, you can view the screen with the
DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen,
for demonstration purposes. Using this function, you can view the difference in the visual quality.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
TV
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW'1,HWKHQSUHVVWKHENTER button.
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW2II'HPRRU2QWKHQSUHVVWKH
ENTER button.
• Off: Switches off the DNIe mode.
• Demo: The screen before applying DNIe appears on the left screen.
The screen after applying DNIe appears on the right.
• On: Switches on the DNIe mode.
Press the EXIT button to exit.
DNIeTM (Digital Natural Image engine)
This feature brings you a more detailed image with 3D noise reduction and
detailed, contrast and white enhancement.
This function doesn’t work when the Input Source is PC.
The DNle function is not supported in the Movie mode.
English - 29
Picture
Ÿ0RUH
Color Tone
'HWDLOHGVHWWLQJV
Size
Digital NR
Active Color
DNle
5HVHW
Move
TV
: Cool2
: 16 : 9
: Low
: On
: On
2.
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Picture
Ÿ0RUH
Color Tone
Detailed settings
Size
Digital NR
Active Color
DNle
Reset
Move
: Cool2
: 16 : 9
: Low
: Off
Off
Demo
: Off
On
: OK
Enter
Return
Freezing the Picture
1. Press the STILL button to freeze a moving picture.
Normal sound will still be heard. Press again to cancel.
While V-Chip is in operation, the Still function cannot be used.
Setting the Film Mode
<RXFDQDXWRPDWLFDOO\VHQVHDQGSURFHVV¿OPVLJQDOVIURPDOOVRXUFHVDQGDGMXVWWKHSLFWXUHIRURSWLPXPTXDOLW\
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
TV
Setup
ŸMore
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW)LOP0RGHWKHQSUHVVWKHENTER button.
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW2QRU2IIWKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
Film Mode
: Off
Wall-Mount Adjustment
PIP
Ź
Ź
Ź
Function Help
SW Upgrade
Ź
Ź
Film mode is supported in TV, VIDEO, S-VIDEO, and COMPONENT480i.
Move
TV
: Off
Enter
Return
Setup
ŸMore
Film Mode
: Off
Off
On
Wall-Mount Adjustment
PIP
Function Help
: Off
SW Upgrade
Move
Enter
Return
HDMI Black Level
You can select the black level on the screen to adjust the screen depth.
TV
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
Blue Screen
0HORG\
PC
Home theater PC
2. Press the ŸRUź buttons to select “HDMI Black Level”, then
press the ENTER button.
3. Press the ŸRUź button to select “Normal”, “Low ”, then press
the ENTER button.
Setup
ŸMore
Energy Saving
HDMI Black Level
ź0RUH
Move
TV
: Off
2II
Ź
Ź
: Off
Ź
: Off
:Normal
Ź
Ź
Enter
Return
Setup
ŸMore
• Normal: The screen gets brighter.
• Low: The screen gets darker.
This function is active only when an external device
(DVD player, STB etc.) is connected to the TV via HDMI(RGB Signal).
Press the EXIT button to exit.
English - 30
Blue Screen
Melody
: Off
: Off
PC
Home theater PC
Energy Saving
HDMI Black Level
ź0RUH
Move
: Off
: Off
Normal
:Normal
Low
Enter
Return
Viewing Picture-in-Picture
This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV
channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’below for detaileds. You can use the
PIP feature to simultaneously watch two video sources. (See page 38 to select the PIP picture sound.)
While V-Chip (See page 56) is in operation, the PIP function cannot be used.
While xvYCC (See page 27) is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³6HWXS´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW3,3WKHQSUHVVWKHENTER button.
TV
Setup
ŸMore
)LOP0RGH
2II
Ź
Wall-Mount Adjustment
3,3
Function Help
: Off
Ź
Ź
Ź
Ź
SW Upgrade
Move
2. Press the ENTER button again.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW2QWKHQSUHVVWKHENTER button.
Enter
TV
If you turn the TV off while watching in PIP mode and turn it on again, the PIP
window will disappear.
You can view Analog TV broadcasts on the PIP screen (sub-picture) when the
main picture is from an external device connected to HDMI1,2,3,
Component1,2, or PC
PIP
PIP
Size
Position
: Off
: On
:
Channel
: Cable 3
Move
Main picture
Sub picture
Component 1,2
HDMI 1,2,3
PC
Analog TV broadcasts only
Return
Enter
Return
Alternately, you can press the PIP button on the remote control repeatedly to activate or
deactivate the PIP.
TV
Changing the PIP Channel
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&KDQQHO´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKHGHVLUHGFKDQQHOLQWKH3,3ZLQGRZ
PIP
PIP
Size
: On
:
Ź
Ź
Position
Channel
:
: Cable 3
Ź
Ź
Press the ENTER buttons.
MAIN: PC / HDMI 1,2,3 / Component 1,2
PIP: TV(Analog)
Move
The channel can be active when the sub picture is set to TV.
TV
PIP
Size
Position
Channel
Move
Press the PIP Channel buttons on the remote control.
English - 31
Enter
Return
PIP
: On
:
:
Ÿ
: Cable 33
ź
Enter
Return
Changing the Position of the PIP Window
4. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³3RVLWLRQ´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKHGHVLUHGFKDQQHOLQWKH3,3ZLQGRZ
TV
Press the ENTER buttons.
The Double (
Position mode.
), Double Wide (
) mode cannot be selected in
PIP
PIP
Size
: On
:
Ź
Position
:
Ź
Channel
: Cable 3
Ź
Move
Enter
TV
: On
:
Position
:
Channel
: Cable 3
TV
Enter
Return
PIP
PIP
Size
Position
Channel
5. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³6L]H´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKHGHVLUHGFKDQQHOLQWKH3,3ZLQGRZ
Press the ENTER buttons.
Return
PIP
PIP
Size
Move
Changing the Size of the PIP Window
Ź
: On
:
:
: Cable 3
Ź
Ź
Ź
Ź
Press the EXIT button to exit.
If the main picture is in PC and HDMI 1 mode, Size is not available.
You may notice that the picture in the PIP window becomes slightly unnatural
when you use the main screen to view a game or karaoke.
You can adjust picture position only by using the
size menu.
Move
TV
PIP
Size
Position
Channel
Move
English - 32
Enter
Return
PIP
: On
:
:
: Cable 3
Enter
Return
Sound Control
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the "automatic" settings.)
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6RXQGWKHQSUHVVWKHENTER button.
TV
Sound
0RGH
&XVWRP
Equalizer
SRS TruSurround XT : Off
0XOWL7UDFN2SWLRQV
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW(TXDOL]HUWKHQSUHVVWKHENTER button.
Move
3. 3UHVVWKHŻRUŹEXWWRQVWRVHOHFWDSDUWLFXODUIUHTXHQF\WRDGMXVW
3UHVVWKHŸRUźEXWWRQVWRLQFUHDVHRUGHFUHDVHWKHOHYHORIWKHSDUWLFXODUIUHTXHQF\
TV
Press the ENTER button.
L
• L/R Sound Balance Adjustment :
To adjust the sound balance of the L/R speakers.
• Bandwidth Adjustment (100Hz, 300Hz, 1K, 3K, 10K) :
: To adjust the level of different bandwidth frequencies.
Enter
Return
Equalizer
R
Press the EXIT button to exit.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
+
+
0
0
-
Balance
Move
100Hz 300Hz 1K
3K
Adjust
10K
Return
Using Automatic Sound Settings
Your TV has automatic sound settings ("Standard", "Music", "Movie", "Speech", and "Custom") that are preset at the factory.
Or, you can select "Custom", which automatically recalls your personalized sound settings.
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Sound", then press the ENTER button.
TV
Sound
0RGH
&XVWRP
Equalizer
SRS TruSurround XT : Off
0XOWL7UDFN2SWLRQV
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
Move
2. Press the ENTER button to select "Mode".
Press the ŸRUź buttons to select "Standard", "Music", "Movie", "Speech",
or "Custom" sound setting, then press the ENTER button.
Press the EXIT button to exit.
•
•
•
•
•
Choose Standard for the standard factory settings.
Choose Music when watching music videos or concerts.
Choose Movie when watching movies.
Choose Speech when watching a show that is mostly dialog (i.e., news).
Choose Custom to recall your personalized settings
(see “Customizing the Sound”).
Press the S.MODE button on the remote control repeatedly to select one of the sound
settings.
English - 33
TV
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Sound
Mode
: Custom
Standard
Music
Equalizer
SRS TruSurround XT : Off Movie
Speech
Multi-Track Options
Custom
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
Move
Enter
Ź
Return
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal
television speakers. It is fully compatible with all multichannel formats.
1. Press the MENU button to display the menu.
TV
Sound
0RGH
&XVWRP
Ź
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6RXQGWKHQSUHVVWKHENTER button.
Equalizer
SRS TruSurround XT : On
0XOWL7UDFN2SWLRQV
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW6567UX6XUURXQG;7WKHQSUHVVWKH
ENTER button.
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW2QRU2IIWKHQSUHVVWKHENTER button.
TV
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Return
Sound
Mode
: Custom
Equalizer
SRS TruSurround XT : Off
Off
On
Multi-Track Options
Auto Volume
: Off
Internal Mute
: Off
Sound Select
: Main
Reset
Press the EXIT button to exit.
Move
Enter
Return
TRADEMARK & LABEL LICENSE NOTICE
TruSurround XT, SRS and
Symbol are
trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
Choosing a Multi-Channel Sound (MTS) track - Digital
The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous
translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program.
Preferred Language
TV
Quick way to access the MTS menu: Just press the “MTS” button on the
remote control. You can listen in a language other than your chosen language
by pressing the MTS button.
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³0XOWL7UDFN2SWLRQVWKHQSUHVVWKHENTER
button.
Sound
0RGH
&XVWRP
Equalizer
SRS TruSurround XT : On
0XOWL7UDFN2SWLRQV
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6RXQGWKHQSUHVVWKHENTER button.
Move
TV
3. Press the ENTER button to select “Preferred Language”.
3UHVVWKHŸRUźEXWWRQVWRFKRRVHWKHODQJXDJH(QJOLVK6SDQLVKRU)UHQFK\RX
want, then press the ENTER button.
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Multi-Track Options
Preferred Language(QJOLVK
Multi-Track Sound : Stereo
Ź
Ź
Press the EXIT button to exit.
Enter
TV
Return
Multi-Track Options
Preferred Language : English
English
Spanish
Multi-Track Sound : Stereo
French
Move
You can listen in a language other than the favorite language by pressing
the MTS button on the remote control.
English - 34
Enter
Return
Choosing a Multi-Channel Sound (MTS) track - Analog
Multi-Track Sound
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6RXQGWKHQSUHVVWKHENTER button.
TV
Multi-Track Options
Preferred Language(QJOLVK
Multi-Track Sound : Stereo
Ź
Ź
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³0XOWL7UDFN2SWLRQVWKHQSUHVVWKH
ENTER button.
Enter
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³0XOWL7UDFN6RXQG´WKHQSUHVVWKH ENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWDVHWWLQJ\RXZDQWWKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
TV
Return
Multi-Track Options
Preferred Language : English
Multi-Track Sound : StereoMono
Stereo
SAP
• Choose Mono for channels that are broadcasting in mono, or if you are having
difficulty receiving a stereo signal.
• Choose Stereo for channels that are broadcasting in stereo.
• Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
Move
Enter
Return
Press the MTS buttons on the remote control repeatedly to select “Mono”,
“Stereo”, or “SAP”.
Automatic Volume Control
Reduces the differences in volume level among broadcasters.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6RXQGWKHQSUHVVWKHENTER button.
TV
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW$XWR9ROXPHWKHQSUHVVWKHENTER button.
3. 3UHVVWKHŸRUźEXWWRQVWRVHW$XWR9ROXPH2QRU2IIWKHQSUHVVWKH
ENTER button.
Sound
0RGH
&XVWRP
Equalizer
SRS TruSurround XT : On
0XOWL7UDFN2SWLRQV
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
Move
TV
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Sound
Mode
: Custom
Equalizer
SRS TruSurround XT : On
Multi-Track Options
Off
Auto Volume
: Off
On
Internal Mute
: Off
Press the EXIT button to exit.
Sound Select
Reset
Move
English - 35
: Main
Enter
Return
Selecting the Internal Mute
Sound output from the TV speakers is muted.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6RXQGWKHQSUHVVWKHENTER button.
TV
Sound
0RGH
&XVWRP
Equalizer
SRS TruSurround XT : On
0XOWL7UDFN2SWLRQV
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW,QWHUQDO0XWHWKHQSUHVVWKHENTER button.
Move
TV
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³2Q´WKHQSUHVVWKHENTER button.
Return
Sound
Mode
: Custom
Equalizer
SRS TruSurround XT : On
Multi-Track Options
Auto Volume
: Off
Off
Internal Mute
: Off
On
Sound Select
: Main
Press the EXIT button to exit.
When Internal Mute is set to “On”, Sound menus except Multi-track Options
cannot be adjusted.
The VOL , VOL and MUTE buttons do not operate when the Internal Mute
is set to On.
Reset
Move
TV'S Internal Speakers
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Enter
Return
Audio Out (Optical, L/R Out) to Sound System
RF
AV, S-Video
Component, PC, HDMI
RF
AV, S-Video
Component, PC, HDMI
Internal Mute Off
Speaker Output
Speaker Output
Speaker Output
Sound Output
Sound Output
Sound Output
Internal Mute On
Mute
Mute
Mute
Sound Output
Sound Output
Sound Output
Video No Signal
Mute
Mute
Mute
Mute
Mute
Mute
When “Internal mute” is set to “On”, Sound menus except “Multi-Track Options” cannot be adjusted.
Setting the On/Off melody
A melody sound can be set to come on when the TV is powered On or Off.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
TV
Setup
ŸMore
Blue Screen
0HORG\
PC
+RPH7KHDWHU3&
(QHUJ\6DYLQJ
HDMI Black Level
ź0RUH
Move
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW0HORG\WKHQSUHVVWKHENTER button.
TV
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³2II´³/RZ´³0HGLXP´³+LJK´WKHQSUHVV
the ENTER button.
• Off : Turns off the melody function.
• LOW : Sets the melody volume to low.
• Medium : Sets the melody volume to medium.
• High : Sets the melody volume to high.
: Off
2II
Ź
Ź
2II
2II
:Normal
Ź
Ź
Ź
Enter
Return
Setup
ŸMore
Blue Screen
Melody
PC
Home Theater PC
Energy Saving
HDMI Black Level
: Off
: Off
Off
Low
Medium
: Off
High
: Off
:Normal
ź0RUH
Move
Press the EXIT button to exit.
TRADEMARK & LABEL LICENSE NOTICE
Manufactured under license from Dolby Laboratorories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
English - 36
Enter
Return
Listening to the Sound of the Sub (PIP) Picture
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6RXQGWKHQSUHVVWKHENTER button.
TV
Sound
0RGH
&XVWRP
Equalizer
SRS TruSurround XT : On
0XOWL7UDFN2SWLRQV
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW6RXQG6HOHFW´WKHQSUHVVWKHENTER button.
Move
TV
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Sound
Mode
: Custom
Equalizer
SRS TruSurround XT : On
Multi-Track Options
Auto Volume
: Off
Internal Mute
: Off
Main
Sound Select
: Main
Sub
Reset
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³0DLQ´RU³6XE´WKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
• Main: Used to listen to the sound of the main picture..
• Sub: Used to listen to the sound of the sub picture.
Move
You can select this option when “PIP” is set to “On”.
Enter
Return
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function resets the equalizer setting to the factory
defaults.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQWRVHOHFW6RXQGWKHQSUHVVWKHENTER button.
2. 3UHVVWKHŸRUźEXWWRQWRVHOHFW5HVHW´WKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
TV
Sound
0RGH
&XVWRP
Equalizer
SRS TruSurround XT : On
0XOWL7UDFN2SWLRQV
Auto Volume
: Off
Internal Mute
: Off
6RXQG6HOHFW
0DLQ
Reset
Move
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you can operate
only “Multi track option” in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones
to the system.
The headphone volume and TV volume are adjusted separately.
English - 37
10
Channel Control
Selecting the Antenna
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHOWKHQSUHVVWKHENTER button.
TV
Channel
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Move
2. Press the ENTER button to select “Antenna”.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³$LU´RU³&DEOH´WKHQSUHVVWKH
ENTER button.
TV
Return
Antenna
: Air
Air
Auto Program
Cable
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Press the EXIT button to exit.
Press the ANTENNA button on the remote control.
Move
If the antenna is connected to ANT 1 IN (AIR),
select “Air” and if it is connected to ANT 2 IN
(CABLE), select “Cable”.
Enter
Channel
Enter
Return
or
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE)
are connected, select the antenna input you want.
If the antenna input is not selected properly, noise
may appear on the screen.
Clearing Scrambled Channels - Digital
7KH&OHDU6FUDPEOHG&KDQQHOIXQFWLRQLVXVHGWR¿OWHURXWVFUDPEOHGFKDQQHOVDIWHU$XWR3URJUDPLVFRPSOHWHG
It removes the scrambled channels from the list by tuning the digital cable channels. This process may take up to 20~30 minutes.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHOWKHQSUHVVWKHENTER button.
2. 3UHVVWKHŸRUźEXWWRQWRVHOHFW&OHDU6FUDPEOHG&KDQQHOWKHQSUHVVWKH
ENTER button.
It searches scrambled channels, which are to be removed from the list.
TV
Channel
Move
To stop searching scrambled channels;
3UHVVWKHźEXWWRQWRVHOHFWStop, then press the ENTER button.
3UHVVWKHŻEXWWRQWRVHOHFWYes, then press the ENTER button.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Enter
Return
Clear Scrambled Channel
Removing scrambled channel.
DTV Cable 3-1
50%
3. When the scrambled channel searching is completed, press the ENTER button.
Stop
Enter
Press the EXIT button to exit.
Return
Clear Scrambled Channel
Scrambled Channel Searching is completed.
0 Channels are deleted.
Return
English - 38
Setting the Channel Lists
You can add or delete a channel so only channels you want are displayed.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHOWKHQSUHVVWKHENTER button.
TV
Channel
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHO/LVWWKHQSUHVVWKH
ENTER button.
Move
3. Press the ENTER button to select “All”.
Enter
TV
Return
Channel List
All
Added
Favorite
Default List Mode
Move
4. 3UHVVWKHŸRUźEXWWRQVWRVHOHFWDFKDQQHOWRGHOHWHWKHQSUHVVWKH
ENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³'HOHWH´WKHQSUHVVWKHENTER button to
delete the channel.
The
mark will disappear.
Ź
: All
Enter
Return
Channel List / All
Air 5
1/2
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
Air 9
Air 10
DTV Air 10-1
Watch
DTV Air 10-2
Add
DTV Air 10-3
Delete
DTV Air 10-1
Favorite
DTV Air 10-2
DTV Air 10-3
List Mode
Enter
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
CH
Page
Return
Channel List / All
Air 5
1/2
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
5. 3UHVVWKHŸRUźEXWWRQVWRVHOHFWDFKDQQHOWRDGGWKHQSUHVVWKH
ENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³$GG´WKHQSUHVVWKHENTER button to
add the channel.
The
mark will appear and the channel will be added.
CH
Page
Return
Air 5
1/2
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
All selected channels will be shown on “Added menu”.
Air 9
Air 10
DTV Air 10-1
Watch
DTV Air 10-2
Add
DTV Air 10-3
Delete
DTV Air 10-1
Favorite
DTV Air 10-2
DTV Air 10-3
List Mode
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Add All
Delete All
Enter
Return
Channel List / All
Air 5
1/2
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
English - 39
Enter
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Add All
Delete All
Channel List / All
Press the EXIT button to exit.
• P.MODE (Red) button: Press repeatedly to select “All”, “Added”, or
“Favorite”.
• S.MODE (Green) button: Press to add all channels deleted.
• STILL (Yellow) button: Press to delete all channels memorized.
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
List Mode
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
List Mode
Enter
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
CH
Page
Return
To Set-Up Your Favorite Channels
You can set channels you watch frequently as favorites.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHOWKHQSUHVVWKHENTER button.
TV
Channel
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHO/LVWWKHQSUHVVWKH
ENTER button
.
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³$GGHG´WKHQSUHVVWKHENTER button.
TV
Enter
Return
Channel List
All
Added
Favorite
Default List Mode
Move
4. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW\RXUIDYRULWHFKDQQHOVWRZDWFKDPRQJWKH
labeled channels. Then press the ENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³)DYRULWH´WKHQSUHVVWKHENTER button.
The " " symbol will be highlighted and the channel will be set as a Favorite.
To cancel your Favorite channel selection, press the ENTER button until the
" " symbol is no longer highlighted.
Press the EXIT button to exit.
Return
Channel List / Added
1/2
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Air 9
Air 10
DTV Air 10-1
Watch
DTV Air 10-2
Add
DTV Air 10-3
Delete
DTV Air 10-1
Favorite
DTV Air 10-2
DTV Air 10-3
List Mode
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
Enter
Return
Channel List / All
Air 5
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
1/2
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
List Mode
Move
English - 40
Enter
Air 5
Move
Only memorized channels can be set as favorite channels.
All favorite channels will be shown in the “Favorite” menu.
Ź
: All
Enter
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
CH
Page
Return
Using the Channel Lists
Displays the channel list automatically when you press CH LIST button on the remote. (Choose All, Added, or Favorite)
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHOWKHQSUHVVWKHENTER button.
TV
Channel
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHO/LVWWKHQSUHVVWKH
ENTER button.
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³'HIDXOW/LVW0RGH´WKH&+/LVW\RXZDQWWR
appear when you press CH.LIST) then press the ENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³$OO´³$GGHG´RU³)DYRULWH´WKHQSUHVVWKH
ENTER button.
Enter
TV
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Channel List
All
Added
Favorite
Default List Mode
: All
All
Added
Favorite
The CH.List you have chosen will now be set.
Ź
Press the EXIT button to exit.
Move
Enter
Return
Alternately, press the CH LIST button on the remote control to bring up the Channel Lists.
Viewing the Channel Lists
You can display a list of all channels, added channels or your favorite channels.
TV
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHOWKHQSUHVVWKHENTER button.
Channel
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHO/LVWWKHQSUHVVWKH
ENTER button.
Move
Enter
TV
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³$OO´³$GGHG´RU³)DYRULWH´WKHQSUHVVWKH
ENTER button.
• P.MODE (Red) button: Press repeatedly to select “All”, “Added”, or
“Favorite”
: All
Enter
Ź
Return
Channel List / All
Air 5
1/2
DTV Air 2-1
Air3
Air4
Air 5
Air 6
Air 7
DTV Air 7-1
Air 8
Move
English - 41
Return
Channel List
All
Added
Favorite
Default List Mode
Move
4. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&KDQQHO´WKHQSUHVVWKHENTER button.
To toggle between your all channels, add channels, or favorite channels,
use the red (P.Mode) button on the remote control.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
List Mode
Enter
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
Air 12
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Delete All
CH
Page
Return
Labeling Channels
Channels can be labeled so that their call letters appear whenever the channel is selected.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&KDQQHO´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³1DPH´WKHQSUHVVWKHENTER button.
TV
Channel
Move
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKHFKDQQHOWREHDVVLJQHGDQHZQDPH
then press the ENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWDOHWWHUDQXPEHURUDEODQN5HVXOWVLQWKLV
sequence: A...Z, 0...9, +, -, *, /, blank).
3UHVVWKHŹEXWWRQWRVZLWFKWRWKHQH[WILHOGZKLFKZLOOEHVHOHFWHG
6HOHFWDVHFRQGOHWWHURUGLJLWE\SUHVVLQJWKHŸRUźEXWWRQVDVDERYH
Repeat the process to select the last three digits. When you have finished,
press the ENTER button to assign the new name.
7RHUDVHWKHDVVLJQHGQHZQDPHVHOHFW&OHDUE\SUHVVLQJWKHŻRUŹEXWWRQ
then press the ENTER button.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Enter
TV
Name
Air 2
Clear
Air 3
Clear
Air 4
Clear
Air 5
Clear
Air 6
Clear
Move
Enter
TV
Press the EXIT button to exit.
Return
Return
Name
Air 2
Ÿ
Clear
A
ź
The names of digital broadcasting channels are automatically assigned and
thus cannot be assigned by users.
Air 3
Clear
Air 4
Clear
Air 5
Clear
Air 6
Clear
Move
Adjust
Return
/1$/RZ1RLVH$PSOL¿HU
,IWKH79LVRSHUDWLQJLQDZHDNVLJQDODUHDVRPHWLPHVWKH/1$IXQFWLRQFDQLPSURYHWKHUHFHSWLRQDORZQRLVHSUHDPSOL¿HU
boosts the incoming signal).
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&KDQQHO´WKHQSUHVVWKHENTER button.
TV
Channel
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³/1$´WKHQSUHVVWKHENTER
button.
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³2Q´WKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
Move
LNA functions when the antenna is set to Air or Cable. Settings will be stored
separately in each channel. (See “Selecting the antenna.” on page 38)
TV
Return
Channel
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
Off
LNA
: OnOn
Move
English - 42
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Enter
Return
Fine Tuning Analog Channels
8VH¿QHWXQLQJWRPDQXDOO\DGMXVWDSDUWLFXODUFKDQQHOIRURSWLPDOUHFHSWLRQ
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW&KDQQHOWKHQSUHVVWKHENTER button.
TV
Channel
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW)LQH7XQHWKHQSUHVVWKHENTER button.
Move
3. 3UHVVWKHŻRUŹEXWWRQVWRDGMXVWWKHILQHWXQLQJ
To store the fine tuning setting in the TV’s memory, press the ENTER button.
Enter
Return
Fine Tune
Air 24
0
If you do not store the fine-tuned channel in memory, adjustments are not saved.
4. 7RUHVHWWKHILQHWXQLQJVHWWLQJSUHVVWKHźEXWWRQWRVHOHFW5HVHW
then press the ENTER button.
Reset
Adjust
Press the EXIT button to exit.
"*" will appear next to the name of fine-tuned channels.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Save
Return
Fine Tune
Air 24
+3
Reset
Adjust
Save
Return
Fine Tune
Air 24 *
Fine Tuned
+3
Reset
Adjust
Save
Return
Fine Tune
Air 24
0
Reset
Move
Enter
Return
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect
UHFHSWLRQTXDOLW\RU\RXZLOOQRWUHFHLYHWKHPDWDOO6RXQOLNHDQDORJFKDQQHOV\RXFDQQRW¿QHWXQHDGLJLWDOFKDQQHO<RXFDQ
however, adjust your antenna to improve the reception of available digital channels.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&KDQQHO´WKHQSUHVVWKHENTER button.
TV
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³6LJQDO6WUHQJWK´WKHQSUHVVWKHENTER
button.
If the signal strength meter indicates that the signal is weak, physically adjust your
antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest
signal.
Move
TV
Press the EXIT button to exit
Channel
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Antenna
: Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA
: On
Enter
Return
Signal Strength
OK
Enter
English - 43
Return
PC Display
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,
depending upon your particular version of Windows and your particular video card. However, even if your actual screens look
different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a
display dialog-box will appear.
3. When the control panel window appears, click on "Display" and a display dialog-box
will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution)
Optimum: 1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box,
the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
720 X 400
640 X 480
31.469
31.469
70.087
59.940
28.322
25.175
-/+
-/-
VESA
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1920 x 1080
37.861
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
79.976
66.500
72.809
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.025
60.000
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
123.000
138.500
-/-/+ /+
+ /+
+ /+
+ /+
-/-/+ /+
+ /+
-/+
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 X 350
720 X 400
640 X 480
31.469
31.469
31.469
70.086
70.087
59.940
25.175
28.322
25.175
+ /-/+
-/-
VESA
800 x 600
1024 x 768
1280 x 1024
1920 x 1080
37.879
48.364
63.981
66.587
60.317
60.000
60.020
59.934
40.000
65.000
108.000
138.500
+ /+
-/+ /+
+ /-
HDMI/DVI Input
English - 44
Setting up the TV with your PC
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
7KHIXQFWLRQDOVRDXWRPDWLFDOO\¿QHWXQHVWKHVHWWLQJVDQGDGMXVWVWKHIUHTXHQF\YDOXHVDQGSRVLWLRQV
This function does not work in DVI-Digital mode.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW3&WKHQSUHVVWKHENTER button.
TV
Setup
ŸMore
Change to the PC mode first.
Blue Screen
: Off
Ź
0HORG\
PC
2II
Ź
+RPHWKHDWHU3&
2II
Ź
(QHUJ\6DYLQJ
2II
Ź
HDMI Black Level
:Normal
Ź
ź0RUH
Move
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW$XWR$GMXVWPHQWWKHQSUHVVWKHENTER button.
Enter
TV
Return
PC
Ź
Ź
Ź
Ź
Image Lock
Position
Auto Adjustment
Image Reset
Press the EXIT button to exit.
Move
Enter
Return
Auto Adjustment in Progress. Please Wait
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then do the frequency adjustments to the utmost and fine tune again(See page 44). After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW3&WKHQSUHVVWKHENTER button.
TV
PC
Ź
Ź
Ź
Ź
Image Lock
Position
Auto Adjustment
Image Reset
Change to the PC mode first.
2. Press the ENTER button to select "Image Lock".
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW&RDUVHRU)LQHWKHQSUHVVWKHENTER button.
3UHVVWKHŻRUŹEXWWRQVWRDGMXVWWKHVFUHHQTXDOLW\
TV
Enter
Return
Image Lock
Coarse
Fine
50
0
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT button to exit.
Move
Enter
Ÿ
Coarse
ź
50
Move
English - 45
Return
Adjust
Return
Changing the Screen Position
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQWRVHOHFW3&WKHQSUHVVWKHENTER button.
TV
Change to the PC mode first.
PC
Image Lock
Ź
Position
Ź
Auto Adjustment
Image Reset
Ź
Ź
2. 3UHVVWKHŸRUźEXWWRQWRVHOHFW3RVLWLRQWKHQSUHVVWKHENTER button.
3. 3UHVVWKHŸRUźEXWWRQWRDGMXVWWKH93RVLWLRQ
3UHVVWKHŻRUŹEXWWRQWRDGMXVWWKH+3RVLWLRQ
Press the ENTER button.
Move
Enter
Return
Position
Ÿ
TV
Ÿ
Ÿ
Press the EXIT button to exit.
Ÿ
Adjust
Initializing the Screen Position or Color Settings
You can replace all image settings with the factory default values.
TV
Enter
PC
Ź
Ź
Ź
Ź
Image Lock
Position
Auto Adjustment
Image Reset
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQWRVHOHFW3&WKHQSUHVVWKHENTER button.
Return
Change to the PC mode first.
2. 3UHVVWKHŸRUźEXWWRQWRVHOHFW,PDJH5HVHWWKHQSUHVVWKHENTER button.
Move
Enter
Return
Press the EXIT button to exit.
Image Reset is completed.
Setting the Home Theater PC
This function enables you to view higher quality pictures while in PC Mode.
After setting the Home Theater PC function to On, you can go into the Detailed Settings
menu and make adjustments without affecting settings in the regular TV mode.
TV
1. Press the MENU button to display the menu.
Press the ŸRUź button to select "Setup", then press the ENTER button.
(QHUJ\6DYLQJ
HDMI Black Level
ź0RUH
Move
2. Press the ŸRUź button to select “Home Theater PC”, then press the ENTER
button.
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFW³2Q´RU2IIWKHQSUHVVWKHENTER button.
ΠOff: Turns off the settings for screen-related functions in PC input mode.
ΠOn: Turns on the settings for screen-related functions in PC input mode to provide more
dynamic scenes.
Press the EXIT button to exit.
This function is available only in PC mode.
English - 46
Setup
ŸMore
Blue Screen
0HORG\
PC
+RPHWKHDWHU3&
TV
: Off
2II
Ź
Ź
2II
Ź
2II
:Normal
Ź
Ź
Enter
Return
Setup
ŸMore
Blue Screen
Melody
PC
Home theater PC
Energy Saving
HDMI Black Level
ź0RUH
Move
: Off
: Off
: Off
Off
: Off
On
:Normal
Enter
Return
Time Setting
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV. (Just press the INFO button.)
Option 1: Setting the Clock Manually
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
Press the ŸRUź buttons to select "Time", then press the ENTER button.
TV
Setup
Ź
Plug & Play
Language
: English
Ź
Time
Game Mode
: Off
Ź
Ź
Ź
V-Chip
Ź
Caption
Ź
Menu TransParency : High
źMore
Move
2. Press the ENTER button to select "Clock".
Enter
TV
Exit
Time
--/--/----/--:-- -Clock
Sleep Timer
Timer 1
Timer 2
Timer 3
: Off
: Inactivated
: Inactivated
: Inactivated
Move
3. Press the ENTER button to select “Clock Mode”.
Press the ŸRUź buttons to select “Manual”, then press the ENTER button.
TV
Enter
Return
Clock
Clock Mode
Clock Set
Time Zone
DST
: Manual
Move
4. Press the ŸRUź buttons to select “Clock Set”, then press the ENTER button.
Ź
Ź
Ź
Ź
Ź
TV
Enter
Ź
Ź
Ź
Ź
Return
Clock Set
Set Current date adn time.
Month
Day
Year
Minute
am/pm
Ÿ
ź
Hour
Move
5. 3UHVVWKHŻRUŹEXWWRQVWRPRYHWR³0RQWK´³'D\´³<HDU´³+RXU´³0LQXWH´
or “am/pm”. Set the date and time you want by pressing the ŸRUź buttons,
then press the ENTER button.
TV
Adjust
Return
Clock Set
Set current data and time.
Month
Day
Year
Ÿ
Press the EXIT button to exit.
1
1
2007
Hour
Minute
am/pm
12
00
am
ź
The current time will appear every time you press the INFO button.
You can set the month, day, year, hour, and minute directly by pressing the
number buttons on the remote control.
English - 47
Move
Adjust
Return
Option 2: Setting the Clock Automatically
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
Press the ŸRUź buttons to select "Time", then press the ENTER button.
TV
Setup
Ź
Plug & Play
2. Press the ENTER button to select "Clock".
Language
: English
Ź
Time
Game Mode
: Off
Ź
Ź
V-Chip
Ź
Caption
Ź
Menu TransParency : High
Ź
źMore
Move
3. Press the ENTER button to select “Clock Mode”.
Press the ŸRUź buttons to select “Auto”, then press the ENTER button.
TV
Enter
Time
--/--/----/--:-- -Ź
Clock
Sleep Timer
: Off
Ź
Timer 1
Timer 2
: Inactivated
: Inactivated
Ź
Ź
Timer 3
: Inactivated
Ź
Move
TV
Enter
: Manual
Manual
Auto
TV
Enter
Press the ŸRUź buttons to select “On” or “Off”, then press the ENTER button.
Return
Clock
Clock Mode
Clock Set
Time Zone
DST
: Auto
: Off
Move
6. Press the ŸRUź buttons to select “DST” (Daylight Saving Time), then press
the ENTER button.
Ź
Ź
: Off
Move
5. 3UHVVWKHŸRUźEXWWRQVWRKLJKOLJKWWKHWLPH]RQHIRU\RXUORFDODUHD
then press the ENTER button.
Return
Clock
Clock Mode
Clock Set
Time Zone
DST
4. Press the ŸRUź buttons to select “Time Zone”, then press the ENTER
button.
Return
Enter
Ź
Ź
Ź
Ź
Return
Time Zone
Select the time zone in which you live.
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Move
Enter
TV
Press the EXIT button to exit.
Depending on the broadcast station and signal, the auto time may not be
set correctly. If this occurs, set the time manually.
Skip
Clock
Clock Mode
Clock Set
Time Zone
: Auto
Ź
Ź
Ź
DST
: Off
Ź
The Antenna or cable must be connected in order to set the time automatically.
Move
TV
Clock Mode
Clock Set
Time Zone
DST
Move
English - 48
Enter
Return
Clock
: Auto
On
: Off
Off
Enter
Return
Setting the Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW7LPHWKHQSUHVVWKHENTER button.
TV
Time
1/ 1/ 2007/ 12 : 00 am
Ź
Clock
Quick way to access the sleep timer setting: Simply press the “SLEEP”
button on the remote control.
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW6OHHS7LPHUWKHQSUHVVWKHENTER button.
Sleep Timer
: Off
Ź
Timer 1
Timer 2
: Inactivated
: Inactivated
Ź
Ź
Timer 3
: Inactivated
Ź
Move
3. 3UHVVWKHŸRUźEXWWRQVWRDGMXVW³0LQXWH´
Enter
TV
Return
Sleep Timer
Set Sleep Timer.
Minute
Activation
Ÿ
Off
ź
Move
4. Press the Ź button to select “Activation”.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³2Q´WKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
TV
Adjust
Return
Sleep Timer
Set Sleep Timer.
Minute
Activation
Ÿ
30
On
ź
Move
Simply press the SLEEP button on the
remote control for a Quick way to access the sleep timer setting.
English - 49
Adjust
Return
Setting the On/Off Timer
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźbuttons to select "Setup", then press the ENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW7LPHWKHQSUHVVWKHENTER button.
TV
Time
1/ 1/ 2007/ 12 : 00 am
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW7LPHU7LPHU7LPHUWKHQSUHVVWKH
ENTER-button.
Ź
Clock
Sleep Timer
: Off
Ź
Timer 1
Timer 2
: Inactivated
: Inactivated
Ź
Ź
Timer 3
: Inactivated
Ź
Move
TV
3. 3UHVVWKHŸRUźEXWWRQVWRDGMXVW³+RXU´WKHQSUHVVWKHŹbutton to move to
the next step.
Set other items using the same method as above.
3UHVVWKHŸRUźEXWWRQ
Repeat
Select Once, Everyday, Mon-Fri, MonSat, Sat-Sun
3UHVVWKHŸRUźEXWWRQ
Volume
Select the required volume level.
3UHVVWKHŸRUźEXWWRQ
Contents
When the On Timer is active, you can
turn on a specific channel or play back
contents such as photo or audio files.
(Make sure that an USB device is
connected to your TV.)
3UHVVWKHŸRUźEXWWRQ
Return
Timer 1
Ÿ
On Timer
12
Off Timer
12
:
00
am
Inactivate
:
00
am
Inactivate
ź
Repeat
Activate or Inactivate
Enter
Volume
Once
Contents
TV
Move
TV
Air
10
3
Adjust
Return
Contents
Ÿ
Source
TV
Antenna
Air
ź
Channel
3
Music
Photo
Move
When finished, press the RETURN button to return.
Adjust
Return
• The current time will appear every time you press the INFO button.
• You can set the hour, minute, and channel by pressing the number
buttons on the remote control.
Press the EXIT button to exit.
Function Description
Selecting a Menu Language
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW/DQJXDJHWKHQSUHVVWKHENTER button.
TV
Setup
Plug & Play
Language
Time
Game Mode
V-Chip
: English
: Off
Caption
Menu TransParency : High
źMore
Move
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³(QJOLVK´³(VSDxRO´RU³)UDQoDLV´
Press the ENTER button.
Press the EXIT button to exit.
TV
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Setup
Plug & Play
Language
Time
: English
English
Español
Game Mode
: Off
Français
V-Chip
Caption
Menu TransParency : High
źMore
Move
English - 50
Enter
Return
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off"
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
TV
Setup
ŸMore
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW%OXH6FUHHQWKHQSUHVVWKHENTER button.
Blue Screen
: Off
Ź
0HORG\
PC
2II
Ź
+RPHWKHDWHU3&
2II
Ź
(QHUJ\6DYLQJ
2II
Ź
HDMI Black Level
:Normal
Ź
ź0RUH
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW2QRU2IIWKHQSUHVVWKHENTER button.
TV
Enter
Return
Setup
ŸMore
Press the EXIT button to exit.
Blue Screen
Melody
PC
3UHVVLQJWKHŸRUźEXWWRQVZLOODOWHUQDWHEHWZHHQ³2Q´RU³2II´
Home theater PC
Energy Saving
HDMI Black Level
ź0RUH
Move
: Off
Off
On
: Off
: Off
: Off
:Normal
Enter
Return
Using the Game Mode
When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by
selecting Game mode.
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
TV
Setup
Plug & Play
Language
: English
Time
Game Mode
: On
V-Chip
Caption
Menu TransParency : High
źMore
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW*DPH0RGHWKHQSUHVVWKHENTER button.
3. 6HOHFW2QRU2IIE\SUHVVLQJWKHŸRUźEXWWRQVWKHQSUHVVWKHENTER button.
Move
TV
4. Press the EXIT button to exit.
To disconnect the game console and connect another external device, cancel game mode
in the Setup menu.
If you display the TV menu in Game mode, the screen shakes slightly.
Enter
Return
Setup
Plug & Play
Language
Time
Game Mode
V-Chip
: English
Off
: Off
On
Caption
Menu TransParency : High
Game Mode is not available in TV mode.
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Ź
źMore
Move
English - 51
Enter
Return
Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates when watching regular analog channels or when you have an analog external component
(such as a VCR) connected.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³6HWXS´WKHQSUHVVWKHENTER button.
TV
Setup
Plug & Play
Language
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&DSWLRQ´WKHQSUHVVWKHENTER button.
Time
Game Mode
: On
V-Chip
Caption
Menu TransParency : High
źMore
Move
3. Press the ENTER button to select “Caption”.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³2Q´WKHQSUHVVWKHENTER button.
: English
TV
Enter
Caption
Caption Mode
Caption Options
: Off
: Default
Enter
Move
TV
Move
TV
Press the CAPTION button on the remote control to select "On" or " Off".
English - 52
Return
: Off
Off
On
: Default
Enter
Return
: On
: Default
Enter
Ź
Ź
Ź
Return
Caption
Caption
Caption Mode
Caption Options
Press the EXIT button to exit.
The availability of captions depends on the program being broadcast.
Ź
Ź
Ź
Caption
Caption
Caption Mode
Caption Options
The Caption feature doesn’t work in COMPONENT, HDMI or PC modes.
Return
Caption
Caption
Caption Mode
Caption Options
• The default is “CC1”.
• CC1: The Primary Synchronous Caption Service. These are captions in the
primary language that must be in sync with the sound, preferably
matched to a specific frame.
• CC2: The Special Non-Synchronous Use Captions.
This channel carries data that is intended to augment information carried
in the program.
• CC3: Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language
captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2.
• Text1: First Text Service. This may be various non-program related data.
• Text2: Second Text Service. Additional data, usually not program related.
• Text3/Text4: Third and Fourth Text Services.
These data channels should be used only if Text1 and Text2 are
not sufficient.
Ź
Ź
Ź
Ź
Ź
Caption
TV
4. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&DSWLRQ0RGH´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWVXEPHQX'HIDXOW&&a&&RU7H[Wa7H[W
you want, the press the ENTER button.
Ź
Ź
Move
: On
Default
: Default
CC1
: Off
CC2
CC3
CC4
Text1
Text2
ź
Enter
Return
Viewing Closed Captions (On-Screen Text Messages) - Digital
The Digital Captions function operates on digital channels.
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³6HWXS´WKHQSUHVVWKHENTER button.
TV
Caption
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&DSWLRQ´WKHQSUHVVWKHENTER button.
Caption
3. Press the ENTER button to select “Caption”.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³2Q´WKHQSUHVVWKHENTER button.
Caption Options
Caption Mode
Move
4. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&DSWLRQ0RGH´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWVXEPHQX'HIDXOW6HUYLFHa6HUYLFH
CC1~CC4, or Text1~Text4) you want, then press the ENTER button.
Enter
TV
Caption
: On
Ź
Caption Mode
: Default
Ź
Enter
TV
Press the EXIT button to exit.
The availability of captions depends on the program being broadcast.
“Default” means to follow the standard set by the broadcaster.
• Size: This option consists of “Default”, “Small”, “Standard”, and “Large”. The
default is “Standard”.
• Font Style: This option consists of “Default”, “Style0 ~ Style 7”. You can
change the font you want. The default is “Style 0”.
• Foreground Color: This option consists of “Default”, “White”, “Black”, “Red”,
“Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”. You can
change the color of the letter. The default is “White”.
• Background Color: This option consists of “Default”, “White”, “Black”, “Red”,
“Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”. You can
change the background color of the caption. The default is
“Black”.
• Foreground Opacity: This option consists of “Default”, “Transparent”,
“Translucent”, “Solid”, and “Flashing”. You can change
the opacity of the letter.
• Background Opacity: This option consists of “Default”, “Transparent”,
“Translucent”, “Solid”,and “Flashing”. You can change
the background opacity of the caption.
• Return to Default: This option sets each of “Size”, “Font Style”, “Foreground
Color”, “Bakcground color”, “Foreground Opacity”, and
“Background Opacity” to its default.
Press the CAPTION button on the remote control to select "On" or " Off".
English - 53
Return
Caption
Caption
Caption Mode
Caption Options
6. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³6L]H´WKHQSUHVVWKHENTER button.
3UHVVWKHŸRUźEXWWRQVWRVHOHFWWKHGHVLUHG&DSWLRQRSWLRQWKHQSUHVVWKH
ENTER button.
3UHVVWKHŸRUźEXWWRQWRVHOHFWWKHGHVLUHGVXEPHQXRSWLRQV
(see options below), then press ENTER .
Ź
Caption Options
5. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&DSWLRQ2SWLRQV´WKHQSUHVVWKHENTER
button.
Return
Caption
Move
“Caption Options” are available only when “Service1~Service6” can be
selected in “Caption Mode”.
Service1~6 in digital caption mode may not be available depending on the
broadcast.
: Off
Off
On
: Default
Move
: On
Default
: Default
Service1
: Off
Service2
Service3
Service4
Service5
Service6
ź
Enter
TV
Return
Caption
Caption
Caption Mode
Caption Options
Move
TV
: On
: Default
Enter
Ź
Ź
Ź
Return
Caption Options
Size
: Default
Font Style
: Default
Foreground Color : Default
Background Color : Default
Foreground Opacity : Default
Background Opacity: Default
Return to Default
Move
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Return
Menu Transparency Level
Adjusts the transparency of the menu screen.
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
TV
Setup
Ź
Plug & Play
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³0HQX7UDQVSDUHQF\´WKHQSUHVVWKHENTER
button.
Language
: English
Ź
Time
Game Mode
: Off
Ź
Ź
V-Chip
Ź
Caption
Ź
Menu TransParency : High
Ź
źMore
Move
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFWOHYHOWKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
TV
Enter
Return
Setup
Plug & Play
Language
: English
Time
Game Mode
: Off
High
Medium
Caption
Low
Menu TransParency : Medium
Opaque
źMore
V-Chip
Move
Enter
Return
Using the Energy Saving Feature
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the
"Energy Saving " mode option to "High" to reduce eye fatigue as well as power consumption.
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
TV
2. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW(QHUJ\6DYLQJWKHQSUHVVWKHENTER button.
Select the required option (Off, Low, Medium, High, Auto) by pressing the ŸRUźEXWWRQ
Press the ENTER button.
•
•
•
•
•
Off: Turns off the energy saving function.
Low: Sets the TV to low energy saving mode.
Medium: Sets the TV to medium energy saving mode.
High: Sets the TV to high energy saving mode.
Auto: Automatically adjusts the brightness of the TV screen in accordance
with the scenes.
Press the EXIT button to exit.
English - 54
Setup
ŸMore
Blue Screen
0HORG\
PC
+RPH7KHDWHU3&
(QHUJ\6DYLQJ
HDMI Black Level
ź0RUH
Move
TV
: Off
2II
Ź
Ź
2II
2II
:Normal
Ź
Ź
Ź
Enter
Return
Setup
ŸMore
Blue Screen
Melody
PC
Home Theater PC
Energy Saving
HDMI Black Level
ź0RUH
Move
: Off
: Off
Off
: Off
Low
: Off
Medium
:Normal
High
Auto
Enter
Return
Setting the Function Help
Displays help on the menu functions.
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
TV
Setup
ŸMore
Film Mode
: Off
2. Press the ŸRUź buttons to select “Function Help”, then press the ENTER button.
Wall-Mount Adjustment
PIP
3. 3UHVVWKHŸRUźEXWWRQVWRVHOHFW³2Q´WKHQSUHVVWKHENTER button.
Function Help
Ź
Ź
Ź
: Off
Ź
Ź
SW Upgrade
Press the EXIT button to exit.
The predetermined value of the function help is On.
Move
TV
Enter
Return
Setup
ŸMore
Film Mode
: Off
Wall-Mount Adjustment
PIP
Function Help
SW Upgrade
Move
: Off
Off
On
Enter
Return
Digital Noise Reduction
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
TV
2. Press the ŸRUź button to select "Digital NR", then press the ENTER button.
3. Press the ŸRUź button to select "Off", "Low", "Medium", "High", "Auto".
Press the ENTER button.
ΠOff: Turns the screen noise reduction function off.
ΠLow: Reduces screen noise at a low level.
ΠMedium: Reduces screen noise at a medium level.
ΠHigh: Reduces screen noise at a high level.
ΠAuto: Automatically recognizes and reduces screen noise.
Press the EXIT button to exit.
Picture
Ÿ0RUH
Color Tone
Detailed settings
Size
Digital NR
Active Color
DNle
Reset
Move
TV
: 16 : 9
: Low
: On
: On
: OK
Enter
Ź
Ź
Ź
Ź
Ź
Ź
Ź
Return
Picture
Ÿ0RUH
Color Tone
Detailed settings
Size
Digital NR
Active Color
DNle
Reset
Move
English - 55
: Cool2
: Cool2
Off
: 16Low
:9
Medium
: Off
High
: Off
Auto
: Off
: OK
Enter
Return
Using the V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN
(personal ID number) before any of the V-Chip restrictions are set up or changed.
When the V-chip feature is activated, the PIP features do not function.
Setting Up Your Personal ID Number (PIN)
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
TV
Setup
Ź
Plug & Play
2. Press the ŸRUźbuttons to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
The default PIN number of a new TV set is “0-0-0-0”.
Language
: English
Ź
Time
Game Mode
: Off
Ź
Ź
V-Chip
Ź
Caption
Ź
Menu TransParency : High
Ź
źMore
Move
Enter
TV
Return
V-Chip
Enter PIN
*
*
*
Enter PIN
3. The “V-Chip” screen will appear.
3UHVVWKHŸRUźEXWWRQVWRVHOHFW³&KDQJH3,1´WKHQSUHVVWKHENTER button.
The Change PIN screen will appear. Choose any 4 digits for your PIN and enter
them. As soon as the 4 digits are entered, the “Confirm new PIN” screen appears.
Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has
been memorized.
TV
If you forget the PIN, press the remote-control buttons in the following
VHTXHQFHZKLFKUHVHWVWKHSLQWR3RZHU2IIĺ0XWHĺĺĺ
ĺ3RZHU2Q
Return
V-Chip
V-Chip Lock
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: Off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Press the EXIT button to exit.
*
Move
Enter
TV
Return
Change PIN
Enter New PIN
U.S.A Only
This product is covered by the following U.S.patents :US4,930,158,US4,930,160
Confirm New PIN
Enter PIN
English - 56
Return
How to Enable/Disable the V-Chip
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select "Setup", then press the ENTER button.
TV
Setup
Ź
Plug & Play
2. Press the ŸRUźbuttons to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Language
: English
Ź
Time
Game Mode
: Off
Ź
Ź
V-Chip
Ź
Caption
Ź
Menu TransParency : High
Ź
źMore
Move
Enter
TV
Return
V-Chip
Enter PIN
*
*
*
Enter PIN
3. The “V-Chip” screen will appear.
To enable the V-Chip feature, press the ENTER button so that the “V-Chip Lock”
ILHOGLV³2Q´3UHVVLQJWKHŸRUźEXWWRQVZLOODOWHUQDWHEHWZHHQ³2Q´DQG³2II´
TV
*
Return
V-Chip
V-Chip Lock
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: On
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Press the ENTER button.
Press the EXIT button to exit.
Move
Enter
TV
Return
V-Chip
V-Chip Lock
: off
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Move
Off
On
Enter
Return
How to Set up Restrictions Using the “TV Parental Guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.)
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select “Setup”, then press the ENTER button.
TV
2. Press the ŸRUź buttons to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Setup
Plug & Play
Ź
Language
: English
Time
Game Mode
: Off
V-Chip
Caption
Menu TransParency : High
źMore
Ź
Ź
Ź
Ź
Ź
Ź
Move
Enter
TV
Return
V-Chip
Enter PIN
*
*
Enter PIN
English - 57
*
*
Return
3. The “V-Chip” screen will appear. Press the ŸRUź buttons to select “TV Parental
Guidelines”, then press the ENTER button.
TV
V-Chip
TV Parental Guidelines
Ź
Ź
MPAA Rating
Ź
Canadian English
Canadian French
Ź
Ź
Downloadable U.S. Rating
Change PIN
Ź
Ź
V-Chip Lock
Move
4. The “TV Parental Guidelines” screen will appear.
Press the ŸRUź buttons to select one of the six aged based categories:
•
•
•
•
•
•
TV
: On
Enter
TV Parental Guidelines
ALL FV V S
L D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV-Y: Young children
TV-Y7: Children 7 and over
TV-G: General audience
TV-PG: Parental guidance
TV-14: Viewers 14 and over
TV-MA: Mature audience
Move
TV
5. At this point, one of the TV-Ratings is selected.
Press the ENTER button. Depending on your existing setup, the “ ” symbol will
be selected. (Blank = Unblocked, = Blocked)
While “ ” is selected, press the ENTER button to block or unblock the category.
To select a different TV-Rating, press the ŸRUź buttons and then repeat the
process.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options.
See the next step to change any of the following sub-ratings:
FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language /
S: Sexual situation / V: Violence
The V-Chip will automatically block certain categories that are “more
restrictive”. For example, if you block “TV-Y” category, then TV-Y7 will auto
matically be blocked. Similarly, if you block the TV-G category, then all the cat
egories in the “young adult” group will be blocked (TV-G, TV-PG, TV-14, and
TV-MA). The sub-ratings (D, L, S, V) work together similarly.
(See next section.)
6. How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA
(See Step 4, on previous page), and press the Ź button. The “ ”symbol will be
displayed for each sub-rating.
While “ ” is selected, press the ENTER button to go to a sub rating.
Press ENTER to block the sub rating. To select a different TV-Rating, press the
ŸRUź buttons and then repeat the process.
The V-chip will automatically block certain categories that are “More restrictive”.
For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in
TV-14 and TV-MA will automatically be blocked.
7. Press the EXIT button to clear all the screens. (Or proceed to the next section,
and set up additional restrictions based on the MPAA codes.)
These categories consist of two separate groups: TV-Y and TV-Y7 (young
children through age 7), and TV-G through TV-MA (everybody else).
The restrictions for these two groups work independently: If a household
includes very young children as well as young adults, the TV guidelines must
be set up separately for each age group. (See next step.)
English - 58
Return
Enter
Allow All
Block All
Return
TV Parental Guidelines
ALL FV V S
L D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Move
Enter
Allow All
Block All
Return
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies.
When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings
(either MPAA or TV-Ratings).
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select “Setup”, then press the ENTER button.
TV
Setup
Ź
Plug & Play
2. Press the ŸRUź buttons to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Language
: English
Ź
Time
Game Mode
V-Chip
: Off
Ź
Ź
Ź
Caption
Ź
Menu TransParency : High
Ź
źMore
Move
3. The “V-Chip” screen will appear. Press the ŸRUź buttons to select
“MPAA Rating”, then press the ENTER button.
Enter
TV
Return
V-Chip
Enter PIN
*
*
*
Enter PIN
TV
*
Return
V-Chip
TV Parental Guidelines
Ź
Ź
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Ź
Ź
Ź
Ź
Ź
V-Chip Lock
: On
Move
TV
Enter
Return
MPAA Rating
Allow All
Block All
Block
G
PG
PG-13
R
NC-17
X
NR
Move
4. The “MPAA Rating” screen will appear. Repeatedly press the ŸRUź buttons to
select a particular MPAA category. Pressing the ŸRUź buttons will cycle through
the MPAA categories:
•
•
•
•
•
•
•
G: General audience (no restrictions).
PG: Parental guidance suggested.
PG-13: Parents strongly cautioned.
R: Restricted. Children under 17 should be accompanied by an adult.
NC-17: No children under age 17.
X: Adults only.
NR: Not rated.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
While a particular category is selected, press the ENTER button to activate it.
The “ ” symbol will be displayed. Press the ENTER button to block or
unblock the category.
The V-Chip will automatically block any category that is “more restrictive”.
For example, if you block the “PG-13” category, then “R”, “NC-17” and “X” will
automatically be blocked also.
Press the EXIT button to exit.
English - 59
TV
Enter
Return
MPAA Rating
Allow All
Block All
Block
G
PG
PG-13
R
NC-17
X
NR
Move
Enter
Return
How to Set up Restrictions Using the ‘Canadian English’
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select “Setup”, then press the ENTER button.
TV
Setup
Ź
Plug & Play
2. Press the ŸRUź buttons to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Language
: English
Ź
Time
Game Mode
V-Chip
: Off
Ź
Ź
Ź
Caption
Ź
Menu TransParency : High
Ź
źMore
Move
Enter
TV
Return
V-Chip
Enter PIN
*
*
*
*
Enter PIN
3. The “V-Chip” screen will appear. Press the ŸRUź buttons to select
“Canadian English”, then press the ENTER button.
TV
4. Press the ŸRUź buttons to select a appropriate restriction.
Press the ENTER button to activate the restriction selected. The “
indicated.
TV
V-Chip Lock
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: On
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Move
Enter
Allow All
Block All
Block
C
C8+
G
PG
14+
18+
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
• C:
Programming intended for children under age 8.
• C8+: Programming generally considered acceptable for children 8 years and
over to watch on their own.
• G:
General programming, suitable for all audiences.
• PG: Parental Guidance.
• 14+: Programming contains themes or content which may not be suitable for
viewers under the age of 14.
• 18+: Adult programming.
Return
Canadian English
” symbol is
Press the EXIT button to exit.
Move
TV
Enter
Return
Canadian English
Allow All
Block All
Block
C
C8+
G
PG
14+
18+
Move
English - 60
Return
V-Chip
Enter
Return
How to Set up Restrictions Using the ‘Canadian French’
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select “Setup”, then press the ENTER button.
TV
Setup
Ź
Plug & Play
2. Press the ŸRUź buttons to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Language
: English
Ź
Time
Game Mode
: Off
Ź
Ź
V-Chip
Ź
Caption
Ź
Ź
Menu TransParency : High
źMore
Move
Enter
TV
Return
V-Chip
Enter PIN
*
*
*
*
Enter PIN
TV
3. The “V-Chip” screen will appear. Press the ŸRUź buttons to select
“Canadian French”, then press the ENTER button.
V-Chip
V-Chip Lock
TV
Enter
Allow All
Block All
Block
G
8 ans+
13 ans+
16 ans+
18 ans+
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
• G:
General
• 8 ans+: Programming generally considered acceptable for children 8 years
and over to watch on their own.
• 13 ans+: Programming may not be suitable for children under the age of 13.
• 16 ans+: Programming is not suitable for children under the age of 16.
• 18 ans+: Programming restricted to adults.
Return
Canadian French
” symbol is
Press the EXIT button to exit.
Move
TV
Enter
Return
Canadian French
Allow All
Block All
Block
G
8 ans+
13 ans+
16 ans+
18 ans+
Move
English - 61
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: On
TV Parental Guidelines
MAPP Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Move
4. Press the ŸRUź buttons to select an appropriate restriction.
Press the ENTER button to activate the restriction selected. The “
indicated.
Return
Enter
Return
Using the V-Chip for Digital channels
Parental restriction information can be used while watching DTV channels.
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select “Setup”, then press the ENTER button.
TV
Setup
Ź
Plug & Play
2. Press the ŸRUź buttons to select “V-Chip”, then press the ENTER button.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
Language
: English
Ź
Time
Game Mode
: Off
Ź
Ź
Ź
Ź
Ź
V-Chip
Caption
Menu TransParency : High
źMore
Move
Enter
TV
Return
V-Chip
Enter PIN
*
*
*
Enter PIN
3. The “V-Chip” screen will appear. Press the ŸRUź buttons to select
“Downloadable U.S. Rating”, then press the ENTER button.
If information is not downloaded from the broadcasting station, the
Downloadable U.S. rating menu is deactivated.
Parental restriction information is automatically downloaded while watching
DTV channels. It may take several seconds.
The Downloadable U.S. rating menu is available for use after information is
downloaded from the broadcasting station. However, depending on the infor
mation from the broadcasting station, it may not be available for use.
TV
V-Chip Lock
Ź
Ź
Ź
Ź
Ź
Ź
Ź
: On
TV Parental Guidelines
MPAA Rating
Canadian English
Canadian French
Downloadable U.S. Rating
Change PIN
Move
Enter
Return
The number of
current rating
title
RAting title
Downloadable U.S. Rating
Humor Level
1/2
” symbol is
Press the EXIT button to exit.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
Parental restriction levels differ depending on the broadcasting station.
The default menu name and Downloadable US rating changes depending on
the downloaded information.
Even if you set the On-screen display to your desired language, the
"Downloadable U.S. Rating" menu will appear in English only.
The rating will automatically block certain categories that are more restrictive.
The rating titles(For example: Humor Level..etc) and TV ratings(For example:
DH,MH,H..etc) may differ depending on the broadcasting station.
English - 62
Return
V-Chip
TV
4. Press the ŸRUź buttons to select a appropriate restriction.
Press the ENTER button to activate the restriction selected. The “
indicated.
*
DH
MH
H
VH
EH
Allow All
Block All
Move
Enter
Return
The nimber of
all rating title
Setting the Light Effect (LN-T4065F / LN-T4665F / LN-T5265F)
You can turn on/off the blue LED on the front of TV.
TV
Setup
ŸMore
1. Press the MENU button to display the menu.
Press the ŸRUź buttons to select “Setup”, then press the ENTER button.
2. Press the ŸRUź buttons to select “Light Effect”, then press the ENTER
button.
Blue Screen
: On
Ź
Melody
PC
: Off
Ź
Ź
Home Theater PC
: Off
Ź
Light Effect
: In Watching TV Ź
Energy Saving
: Off
Move
TV
•
•
•
•
Ź
ź0RUH
3. Press the ŸRUź button to select “Off”, “In Standby”, “In Watching TV” or “Always”,
then press the ENTER button.
Off: LED will not come on.
In Standby: Turns the LED on in standby mode.
In Watching TV: Turns the LED on while watching TV.
Always: LED will come on after you turn the TV off.
Enter
Return
Setup
ŸMore
Blue Screen
: On
Melody
: Off
PC
Home Theater PC
Light Effect
Press the EXIT button to exit.
Energy Saving
ź0RUH
Move
Off
: Off
In Standby
: Watching
Mode On
In Watching TV
: Off
Always
Enter
Return
Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG
(726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a
USB drive to the USB port located on located on the side of your TV.
1. Insert a USB drive containing the firmware upgrade into the WISELINK port on
the side of the TV.
TV Side Panel
2. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
USB Drive
3.3UHVVWKHŸRUźEXWWRQWRVHOHFW6RIWZDUHXSJUDGHWKHQSUHVVWKHENTER button.
4. 3UHVVWKHŸRUźEXWWRQWRVHOHFW86%8SJUDGHWKHQSUHVVWKHENTER button.
The message Scanning for USB... It may take up to 30 seconds. is displayed.
Please be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will shut off and turn on automatically after
completing the firmware upgrade. Please check the firmware version after the
upgrades are complete.
TV
Setup
ŸMore
Film Mode
: Off
Wall-Mount Adjustment
PIP
Function Help
: Off
SW Upgrade
Move
Enter
SW Upgrade
Scanning for USB...
It may take up to 30 seconds.
English - 63
Ź
Ź
Ź
Ź
Ź
Return
WISELINK
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class
(MSC) device.
TV Side Panel
Press the POWER button on the remote control or front
Example
panel. Connect a USB device containing JPEG and/or
MP3 files to the WISELINK jack (USB jack) on the
side of the TV.
If you enter the WISELINK mode with no USB device connected the message “There is no device connected” will appear.
In this case, insert the USB device, exit the screen by pressing the WISE LINK button on the remote control and enter the
WISELINK screen again.
Photo and audio files must be named in English, French, or Spanish. If not, the files can not be played. Change the file
names to English, French,or Spanish if necessary.
The file system only supports FAT16/32 (The NTFS file system is not supported)
Certain types of USB devices may not be compatible with this TV.
Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
Recommended image resolution for Wiselink is 600 mega pixels.
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB
Compatibility problem.
Only MP3 and JPEG file formats are supported.
We recommend the sequential jpeg format. Progressive jpeg uses a lot of memory and decoding may fail.
Do not disconnect the USB device while it is “loading.”
Neither PTP (Picture Transfer Protocol) nor MTP (Media Transfer Pprotocol) is supported.
The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not found
at the start of the file
The higher the resolution of the image, the longer it takes to display on the screen.
If the horizontal resolution of an image is higher than 5000, it cannot be decoded.
If the vertical resolution of an image is higher than 4000, it cannot be decoded.
Using the Remote Control Button in WISELINK Menu
Button
Operations
Move the cursor and select an item
Select the currently selected item.
Play or pause the Slide Show or MP3 file.
Return to the previous menu
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
Stop the current function and return to the previous high-level menu.
English - 64
Using the WISELINK Menu
1. Press the MENUEXWWRQ3UHVVWKHŸRUźEXWWRQVWRVHOHFW³,QSXW´
then press the ENTER button.
2. Press the ŸRUź button to select “WISELINK”, then press the ENTER button.
TV
Input
Source List
: TV
Edit Name
WISELINK
Anynet+ (HDMI-CEC)
Move
Enter
Ź
Ź
Ź
Ź
Return
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFWWKHFRUUHVSRQGLQJ86%0HPRU\'HYLFHWKHQ
press the ENTER button.
STORAGE DEVICE
The WISELINK menu differs depending on the USB Memory Device
connected to TV.
STORAGE DEVICE
Generio
STORAGE DEVICE
STORAGE DEVICE
Move
4. 3UHVVWKHŻRUŹEXWWRQWRPRYHWRDQLFRQWKHQSUHVVWKHENTER button.
To exit WISELINK mode, press the WISELINK button on the remote control.
English - 65
Exit
Enter
Return
XTICK
861MB/994MB Free
Move
Press the WISELINK button on the remote control to display a WISELINK menu.
Enter
Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on an USB memory device.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2. Press the ŻRUŹ button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
Move
Enter
Return
3. 3UHVVWKHŸźŻDQGŹEXWWRQVWRVHOHFWDILOHWKHQSUHVVWKHENTER button.
• Pressing the ENTER button over a photo icon shows the currently selected photo
in full screen.
• Pressing the ENTER button over a folder icon shows the JPEG files included in
the folder.
To exit WISELINK mode, press the WISELINK button on the remote control.
Up Folder
Forder1
File 4
File 9
Select
Moving to a photo may take a few seconds to load the file.
At this point, the
icon will appear at the top left of the screen.
INFO
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
Photo menu
Move
View
Return
: Folder icon
This menu only shows files whose file extension is jpg. Files of other formats
such as bmp or tiff will not be displayed.
The files are displayed on a page. 15 thumbnail photos are displayed per
page.
The thumbnails are numbered from left to right and from top to bottom, from 1
to 15.
Certain types of USB Digital camera and audio devices may not be compatible
with this TV.
Folders are displayed first and they are followed by all JPEG files in the current
folder. The folders and JPEG files are sorted in alphabetical order.
If the photo is displayed in full screen, you can zoom in and out or rotate the
photo on the screen.
It takes time to show JPEG files as Thumbnail images.
English - 66
: Photo icon
: Move to the previous
folder stage icon
Selecting a Photo and Slide Show
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2. Press the ŻRUŹ button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
Move
Enter
Return
3. Press the INFO button to display “Slide Show” or “Cancel the Selected file”.
Up Folder
Forder1
File 4
File 9
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
Slide Show
Cancel the Selected file
INFO
Exit
4. 3UHVVWKHŸRUźEXWWRQWRVHOHFW³6OLGH6KRZ´WKHQSUHVVWKHENTER button.
During the slide show, files are displayed in order from the currently shown file.
MP3 files can be automatically played during the Slide Show if the Default
Background Music is set to On. To enable this function, MP3 files and other
photo files must be located in the same folder on the USB Memory Device.
5. Press the INFO button during “Slide Show” to set the option (Slide show Speed,
Background Music, Background Music Setting, List).
3UHVVWKHŸRUźEXWWRQWRVHOHFWWKHRSWLRQWKHQSUHVVWKHENTER button.
• After setting the option press the ENTER button to make a change.
Slide show Speed
Background Music
Background Music Setting
List
INFO
English - 67
Exit
Using the Menu during a Slide Show
Slide Show Speed:
Select to control the slide show speed.
Fast
You can select Slow, Normal, or Fast.
Background Music:
Select to choose whether you want to play an MP3 file during a slide show.
OFF
You can select Music "ON" or "OFF".
Background Music Setting:
Background Music Setting
While the slide show is in progress, MP3 files and folders under the same directory
are displayed.
6HOHFWDIROGHUXVLQJWKHŸRUźEXWWRQVDQGSUHVVWKHENTER button.
The selected folder will be highlighted.
Press the RETURN button again to return to the slide show screen.
The selected background music is played.
&KRRVH¿OHVIRUEDFNJURXQGPXVLF
ŻŻ3DJHŹŹ
Select
Move
Enter
Return
If you turn Off the Background Music, even if the Background Music Settings have
been set up, the background music will not be played.
List:
The file information is displayed as a folder or JPEG file.
English - 68
Forder1
File 4
File 9
Select
To exit WISELINK mode, press the WISELINK button on the remote control.
Up Folder
INFO
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
Photo menu
Move
View
Return
Slideshow function information icon (Displayed at the top left of the screen).
Icon
Play
Current OSD
Function
(Photo) SlideShow
Photo SlideShow is in progress.
You are able to pause a SlideShow and Music by
pressing the PLAY/PAUSE
button on the remote
control during a SlideShow.
Pause
Photo Pause
To resume the SlideShow, press the
PLAY/PAUSE
button on the remote control again.
Move to Next Photo
Pressing the (right) direction button on the remote
control allows you to move to the next photo.
Move to Previous Photo
Pressing the (left) direction button on the remote
control allows you to move to the previous photo
When selecting a photo file, the photo file information is displayed on the left side of the TV screen,
such as the resolution, the date modified and the order of the file in the current directory (e.g. 10th out of 15).
Such as the resolution
Date modified
Order of the file in the
current directory
Photo
Up Folder
Forder1
File 4
File 9
108 x 81
Dec20. 2006
4/25
Select
English - 69
INFO
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
Photo menu
Move
View
Return
Rotating
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2. Press the ŻRUŹ button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
Move
Enter
Return
3. 3UHVVWKHŸźŻDQGŹEXWWRQVWRVHOHFWDILOHWKHQSUHVVWKHENTER button.
Pressing the button over a photo thumbnail displays the photo in full screen.
Up Folder
Forder1
File 4
File 9
Select
4. Press the INFO button to display the option(Slide Show, Rotate, Zoom, List).
3UHVVWKHŸRUźEXWWRQWRVHOHFW³5RWDWH´WKHQSUHVVWKHENTER button.
• The INFO button, the Rotate option and Enter must be pressed each time you
want to rotate the picture. For example, from 90 to 180 degrees.
Slide Show
Rotate
Zoom
List
To rotate a photo, press the INFO button to open the options window, select the
“Rotate” option and press the ENTER button.
Whenever you do this, the photo on the screen is rotated. (90°, 180°, 270°, 0°)
INFO
Exit
To exit WISELINK mode, press the WISELINK button on the remote control.
The rotated file is not saved.
The Zoom/Slide Show option is disabled when the Rotate option is selected.
The Rotating function information icon (Displayed at the top left of the screen).
Icon
Current OSD
Function
Rotating (90°)
This rotates a photo by 90 degrees
Rotating (180°)
This rotates a photo by 180 degrees
Rotating (270°)
This rotates a photo by 270 degrees
Rotating (0°)
This rotates a photo to its original position
English - 70
INFO
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
Photo menu
Move
View
Return
Zooming-in
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2. Press the ŻRUŹ button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
Move
Enter
Return
3. 3UHVVWKHŸźŻDQGŹEXWWRQVWRVHOHFWDILOHWKHQSUHVVWKHENTER button.
Pressing the button over a photo thumbnail displays the photo in full screen.
Up Folder
Forder1
File 4
File 9
Select
4. Press the INFO button to display the option(Slide Show, Rotate, Zoom, List).
3UHVVWKHŸRUźEXWWRQWRVHOHFW³=RRP´WKHQSUHVVWKHENTER button.
The enlarged photo image appears on the screen.
To enlarge a displayed photo, press the INFO button to open the Options window,
select the “Zoom” option and press the ENTER button.
Whenever you do this, the following zoom options are applied in sequence.
Slide Show
Rotate
Zoom
List
INFO
Exit
• The INFO button, the Rotate option and Enter must be pressed each time you
want to Zoom the picture. For example, from x 2 to x 4.
x1
• Zoom(x 2): Zoom-in to the photo x2.
• Zoom(x 4): Zoom-in to the photo x4.
• Zoom(x 1): Restore the photo to its original size.
7RSDQXSGRZQOHIWULJKWSUHVVWKHŸźŻDQGŹEXWWRQV
Images with a resolution larger than 1280 X 720 are not supported.
To exit WISELINK mode, press the WISELINK button on the remote control.
English - 71
INFO
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
Photo menu
Move
View
Return
Zoom function information icon (Displayed at the top left of the screen).
Icon
Current OSD
Function
x2
Zoom (x 2)
Zoom-in to a photo x2.
x4
Zoom (x 4)
Zoom-in to a photo x4.
x1
Zoom (x 1)
Restore a photo to its original size.
Pan Down
Pan down to view the lower part of a zoomed-in
photo.
Pan Up
Pan up to view the upper part of a zoomed-in
photo.
Pan Right
Pan right to view the right side of a zoomed-in
photo.
Pan Left
Pan left to view the left side of a zoomed-in photo.
Pan Down (END)
Pan to the bottom of a zoomed-in photo.
Pan Up (END)
Pan to the top of a zoomed-in photo.
Pan Right (END)
Pan to the right-most part of a zoomed-in photo.
Pan Left (END)
Pan to the left-most part of a zoomed-in photo.
The Rotate/Slide show option is disabled when the Zoom option is selected.
English - 72
Using the MP3 List
This menu shows MP3 files from among the files saved on a USB memory device.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2. Press the ŻRUŹ button to move to “Photo”, then press the ENTER button.
The saved file information is displayed as a folder or file.
Move
Enter
Return
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFWDILOHWKHQSUHVVWKHENTER button.
Nat King Cole-Fly me to the moon
To select all files or a file, press the INFO button to display the Music menus.
Press the ENTER button to select “Play”, “Music Repeat”, or “Cancel the selected
file”.
• Pressing the ENTER button over a musical note icon immediately plays the
music file.
• Pressing the ENTER button over a folder icon shows the music files included in
the folder.
00:04:00
Upper Folder
Folder 1
001 Swan Song feat.TBNY
00:04:01
002 Beatles-Yesterday
00:04:28
003 Fall in Love
00:04:12
004 Tom Waits-Time
00:05:39
005 Chuk Mangione-Feel So good
00:04:30
006 Nat King Cole-Fly me to the moon
00:04:30
Play
007 Ryuichi Sakamoto-Rain
00:03:54
Music Repeat
008 Bon jovi-This ain’t a love song
00:05:25
CancelExit
the selected file
Exit
INFO
Exit
7RVHOHFWDILOHRQWKHQH[WSDJHSUHVVWKH5(:ŻŻRU))ŹŹEXWWRQWRPRYH
to the next page.
4. Press the PLAY/PAUSE
button while playing an MP3 file to pause the file.
Press the STOP button ů to exit Play mode.
: Folder icon
: Photo icon
To exit WISELINK mode, press the WISELINK button on the remote control.
This menu only shows files with the MP3 file extension. Files with other file
extensions are not displayed,even if they are saved on the same USB device.
: Move to the previous
folder stage icon
The selected file is displayed on the top with its playing time.
To adjust the music volume, press the VOL+ or VOL- button on the remote
control. To mute the sound, press the MUTE button on the remote control.
))ŹŹ5(:ŻŻ.H\GRHVQRWIXQFWLRQGXULQJWKHSOD\
Music function information icon (Displayed at the top left of the screen).
Icon
Current OSD
Function
(Music) All
:KHQDOOPXVLF¿OHVDUHEHLQJSOD\HG
(Music) One
:KHQDPXVLF¿OHLVEHLQJSOD\HG
(Music) Play/Pause
(Music) Stop
When pressing the PLAY/PAUSE
button on the
remote control while music is playing. The music
stops and the ‘Play’ text appears at the top of the
screen.
When pressing the STOP ůbutton on the remote
control when music is stopped. The music resumes
and the ‘Stop’ text appears at the top of the screen.
English - 73
Music Repeat
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2. Press the ŻRUŹ button to move to “Music”, then press the ENTER button.
The saved file information is displayed as a folder or file.
XTICK
861MB/994MB Free
Move
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFWDILOHWKHQSUHVVWKHENTER button.
Enter
Nat King Cole-Fly me to the moon
To select all files or a file, press the INFO button to display the Music menus.
Press the ENTER button to select “Play”, “Music Repeat”, or “Cancel the selected
file”.
Return
00:04:00
Upper Folder
Folder 1
Play
Music Repeat
CancelExit
the selected file
INFO
001 Swan Song feat.TBNY
00:04:01
002 Beatles-Yesterday
00:04:28
003 Fall in Love
00:04:12
004 Tom Waits-Time
00:05:39
005 Chuk Mangione-Feel So good
00:04:30
006 Nat King Cole-Fly me to the moon
00:04:30
007 Ryuichi Sakamoto-Rain
00:03:54
008 Bon jovi-This ain’t a love song
00:05:25
Exit
4. Press the ENTER button to select “Music Repeat”.
On
Select to repeatedly play MP3 files in the current folder.
Nat King Cole-Fly me to the moon
00:04:00
Upper Folder
You can select On or Off
Folder 1
• On: Plays back a music file or all music files repeatedly
• Off: Doesn’t play back the music files repeatedly.
Play
Music Repeat
CancelExit
the selected file
To exit WISELINK mode, press the WISELINK button on the remote control.
English - 74
INFO
Exit
001 Swan Song feat.TBNY
00:04:01
002 Beatles-Yesterday
00:04:28
003 Fall in Love
00:04:12
004 Tom Waits-Time
00:05:39
005 Chuk Mangione-Feel So good
00:04:30
006 Nat King Cole-Fly me to the moon
00:04:30
007 Ryuichi Sakamoto-Rain
00:03:54
008 Bon jovi-This ain’t a love song
00:05:25
Using the Setup Menu
Setup displays the user settings of the WISELINK menu.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 65)
2. Press the ŻRUŹ button to move to “Setup”, then press the ENTER button.
Move
Enter
Return
Enter
Return
Enter
Return
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFWDILOHWKHQSUHVVWKHENTER button.
Slide Show Speed
: Fast
Slide Show Repeat
: Off
Background Music On/Off
: On
Music Repeat
: On
Screen Saver
: 5 min
Move
4. 3UHVVWKHŸRUźEXWWRQWRVHOHFWWKHRSWLRQWKHQSUHVVWKHENTER button.
Background Music On/Off
Slow
: Fast
Normal
: Off
Fast
: On
Music Repeat
: On
Screen Saver
: 5 min
Slide Show Speed
Slide Show Repeat
Move
continued...
English - 75
Slide Show Speed:
Select to control the slide show speed. You can select Slow, Normal or Fast.
Slide Show Speed
Background Music
Background Music Setting
: Fast
Fast
: Off
Normal
Slow
Music Repeat
: On
Screen Saver
: Off
Move
Move
Enter
Enter
Return
Return
Background Music :
Select to determine whether to play an MP3 file during a slide show.
Slide Show Speed
You can select Music On or Music Off.
: Fast
Background Music
: Off
On
Background Music Setting
Music Repeat
Off
: On
Screen Saver
: Off
Move
Enter
Return
Background Music Setting:
You can select the background music to play during a slide show. You can also
select the background music while a slide show is playing by pressing the
INFO button and selecting the “Background Music Setting” menu.
Slide Show Speed
: Fast
Background Music
: Off
On
Background Music Setting
Music Repeat
Off
: On
Screen Saver
: Off
ŻŻ3DJHŹŹ
Move
Enter
Return
Music Repeat:
Select to repeatedly play MP3 files in the current folder.
Slide Show Speed
You can select "On" or "Off".
Background Music
: Fast
: Off
Background Music Setting
On:
Off:
(Music) All,
(Music) All,
(Music) One
(Music) One
Music Repeat
: OnOn
Screen Saver
: Off
Off
Move
Enter
Return
Screen Saver:
Select to set the waiting time before the screen saver appears.
The screensaver will appear when no button is pressed for 1, 3 or 5 minutes.
Slide Show Speed
Background Music
: Fast
: Off
Background Music Setting
Music Repeat
: On
Screen Saver
: Off
1 min.
To exit WISELINK mode, press the WISELINK button on the remote control.
3 min.
5 min.
Move
English - 76
Enter
Return
About Anynet+
What is Anynet+?
Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with the TV's remote.
Connecting Anynet+ Devices
The Anynet+ system can be used only with Samsung AV devices that have the Anynet+ feature.
To be sure your Samsung AV device has this feature, check if there is an Anynet+ mark on it.
To directly connect to TV
TV
Anynet+ Device 1
HDMI 1.3 Cable
HDMI 1.3 Cable
Anynet+ Device 2
Anynet+ Device 3
Connect the [HDMI 1],
[HDMI 2] or [HDMI 3] jack on
the TV and the HDMI OUT
jack of the corresponding
Anynet+ device using the
HDMI cable.
HDMI 1.3 Cable
To connect to Home Theater
TV
Anynet+ Device 1
HDMI 1.3 Cable
Anynet+ Device 2
HDMI 1.3 Cable
Anynet+ Device 3
Home Theater
Optical Cable
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
2. Connect the HDMI IN jack
of the home theater and
the HDMI OUT jack of the
corresponding Anynet+
device using the HDMI
cable.
HDMI 1.3 Cable
HDMI 1.3 Cable
Connect the Optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio Input on the Home Theater.
Connect only one Home Theater.
You can listen to 5.1 channel sound through the home theater’s speakers. Otherwise, you can only listen to 2 channel stereo
sound in other cases. Make sure to connect the Digital Audio IN (Optical) of the home theater and the TV correctly to listen
to TV sound through the home theater. However, you cannot listen to sound from the BD recorder that is sent to the home
theater via the TV in 5.1 channel sound because the TV outputs only 2 channel stereo sound. Please see the manual for the
home theater.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 12 AV devices in total.
English - 77
Setting Up Anynet+
The following settings are to use Anynet+ functions.
To use the Anynet+ Function, HDMI Control must be set to On
1. Press the Anynet+ button.
3UHVVWKHŸRUźEXWWRQWRVHOHFW6HWXSWKHQSUHVVWKHENTER button.
2. Press the ENTER button to select Anynet+ (HDMI-CEC), then press the ENTER
button.
Air28
Recevier:
On
Connect Recorder
Setup
3,
3UHVVWKHŸRUźEXWWRQWRVHOHFW2QWKHQSUHVVWKHENTER button.
The Anynet+ (HDMI-CEC) function is enabled.
If you select Off, Anynet+ (HDMI-CEC) is disabled.
Move
Enter
Exit
Setup
HDMI Control
: OffOff
Auto Turn Off
: OffOn
Searching Connections
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
2.
3UHVVWKHŸRUźEXWWRQWRVHOHFWAuto Turn Off, then press the ENTER button.
3.
3UHVVWKHŸRUźEXWWRQWRVHOHFW2QWKHQSUHVVWKHENTER button.
The Auto turn off function is enabled.
If you select Off, the Auto turn off function is canceled.
Press the EXIT button to exit.
Move
Enter
Return
Setup
HDMI Control
: On
Auto Turn Off
: Off
No
Searching Connections
Move
Yes
Enter
Return
The Select Device setting of the TV remote control is to be set to TV to use the
Anynet+ function.
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Scanning and Switching between Anynet+ Devices
1.
Press the Anynet+ button.
Anynet+ devices connected with the TV are listed.
2.
UHVVWKHŸRUźEXWWRQWRVHOHFWWRDSDUWLFXODUGHYLFHDQGSUHVVWKHENTER button.
3
It is switched to the selected device.
3.
,I\RXFDQQRWILQGDGHYLFH\RXZDQWSUHVVWKHŸRUźEXWWRQWRVHOHFW6HDUFKLQJ
Connections, then press the ENTER button.
The meassage Configuring Anynet+ connection... is displayed.
When searching devices completes, the connected devices are listed in the Anynet+
menu.
Air28
Recevier:
On
Connect Recorder
Setup
Move
Enter
Exit
Setup
HDMI Control
2Q
Ź
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
Auto Turn Off
: Yes
Ź
operation during the switching operation.
Searching Connections
Ź
The time required to scan for devices is determined by the number of connected
devices.
Move
Enter
Return
When the device scan is complete, the number of found devices is not displayed.
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV
is on or under a specific circumstance are not displayed in the device list. Therefore select Searching Connections menu to
search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the Anynet+ button.
English - 78
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
Description
Watch TV
Switches from Anynet+ to TV broadcast mode.
(Device_Name) Menu
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
(Device_Name) Operation
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control menu of the DVD
Recorder appears.
Connected to (Device_Name)
Your TV connects to the corresponding device.
Receiver
Sound is output through the receiver.
Setup
You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Operating Status
Available Buttons
After switching to the device, when the menu of the
corresponding device is displayed on the screen.
Numeric buttons
ŸźŻŹENTER buttons
Color buttons
EXIT button
After switching to the device, while playing a file
ŻŻ%DFNZDUGVHDUFK
ŹŹ)RUZDUGVHDUFK
(Stop)
ŹJJ (Play/Pause)
Device with built-in Tuner
After switching to the device, when you are watching a TV
program
&+ŸźEXWWRQ
Audio Device
When Receiver is activated
VOL +/- button
MUTE button
Anyview2
When watching TV
ŹJJ (Play/Pause)
Anynet+ Device
The Anynet+ function only works when the remote control is set to TV.
The REC button works only in Watch TV status.
You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the
TV remote control.
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.
The Anynet+ functions do not work withother manufacturers' products.
In Anynet+ mode, the color buttons may not work properly.
Recording
You can make a recording of a TV program using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
The current TV program is recorded in the Watching TV status. If you are watching
video from another device, the video from the device is recorded.
English - 79
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1.
Press the Anynet+ button.
3UHVVWKHŸRUźEXWWRQWRVHOHFW5HFHLYHUWKHQSUHVVWKHENTER button.
2.
3UHVVWKHŻRUŹEXWWRQWRVHOHFWWR2QWKHQSUHVVWKHENTER button.
Now you can listen to sound through the receiver.
3.
Press the EXIT button to exit.
When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver.
If the receiver is exclusively for a home theater only (supporting audio only), it may not appear in the
device list.
Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.
In case of a content with copyright problem, listening through the receiver may not properly operate.
Air28
Recevier:
On
Connect Recorder
Setup
Move
Enter
Exit
Check Points before Requesting Service
Symptom
Solution
Ŷ &KHFNLIWKHGHYLFHLVDQ$Q\QHWGHYLFH7KH$Q\QHWV\VWHPVXSSRUWV$Q\QHW
devices only.
Ŷ &RQQHFWRQO\RQHUHFHLYHUKRPHWKHDWHU
Ŷ &KHFNLIWKH$Q\QHWGHYLFHSRZHUFRUGLVSURSHUO\FRQQHFWHG
Ŷ &KHFNWKH$Q\QHWGHYLFH¶V9LGHR$XGLR+'0,FDEOHFRQQHFWLRQV
Ŷ &KHFNZKHWKHUWKH79UHPRWHFRQWUROLVLQ79PRGH
Ŷ &KHFNZKHWKHULWLV$Q\QHWH[FOXVLYHUHPRWHFRQWURO
Ŷ $Q\QHWGRHVQ¶WZRUNDWDFHUWDLQFRQGLWLRQ6HDUFKLQJFKDQQHOV2SHUDWLQJ
WISELINK)
Ŷ &KHFNLIWKH$Q\QHWGHYLFHLVSURSHUO\FRQQHFWHGWRWKH79DQGFKHFNLIWKH$Q\QHW
I want to start Anynet+.
(HDMI-CEC) is set to On in the Anynet+ Setup menu.
Ŷ 3UHVVWKHTV button on the TV remote control to switch to TV. Then press the
Anynet+ button to show the Anynet+ menu and select a menu you want.
Ŷ 6HOHFWWatch TV in Anynet+ menu.
I want to exit Anynet+.
Ŷ 3UHVVWKHSOURCE button on the TV remote control and select a device other than
Anynet+ devices.
Ŷ 3UHVVCH, CH LIST, PRE-CH, etc. to change to the TV mode. (Note that the channel
button operates only when a tuner-embedded Anynet+ device is not connected.)
Ŷ <RXFDQQRWXVHWKHUHPRWHFRQWUROZKHQ\RXDUHFRQILJXULQJ$Q\QHWRUVZLWFKLQJWRD
The Connecting to Anynet+
device... message appears on the
view mode.
screen.
Ŷ 8VHWKHUHPRWHFRQWUROZKHQWKH$Q\QHWVHWWLQJRUVZLWFKLQJWRYLHZPRGHLV
complete.
The Anynet+ device does not play. You cannot use the play function when an auto channel scan is in progress or in
WISELINK mode. Stop the currently running function.
Anynet+ does not work.
The connected device is not
displayed.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
&KHFNZKHWKHURUQRWWKHGHYLFHVXSSRUWV$Q\QHWIXQFWLRQV
&KHFNZKHWKHURUQRWWKH+'0,FDEOHLVSURSHUO\FRQQHFWHG
&KHFNZKHWKHU+'0,&RQWUROLVVHWWR2QLQWKH$Q\QHWVHWXSPHQX
6HDUFK$Q\QHWGHYLFHVDJDLQ
<RXFDQFRQQHFWDQ$Q\QHWGHYLFHXVLQJWKH+'0,FDEOHRQO\6RPH+'0,
cables may not support Anynet+ functions.
English - 80
Appendix
Troubleshooting
,IWKH79VHHPVWRKDYHDSUREOHP¿UVWWU\WKLVOLVWRISRVVLEOHSUREOHPVDQGVROXWLRQV
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Possible Solution
Poor picture
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
No sound or sound is too low at
maximum volume.
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD,
cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Picture rolls vertically.
Check all wire connections.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on.
Make sure the wall outlet is working.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
“Check signal cable” message.
Ensure that the signal cable is firmly connected to the PC source.
“Not Supported Mode” message.
Check the maximum resolution and the frequency of the Video Adapter.
Compare these values with the data in the Display Modes.
Digital broadcasting screen
problem.
Please check the digital signal strength and input antenna.
The image is too light or too dark.
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Black bars on the screen.
Make sure the broadcast you’re receiving is High Definition (HD).
HD channels sometimes broadcast Standard Definition (SD) programming, which can
cause black bars.
Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or
Pink tint.
Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working.
If you are using a Cable/Satellite box, you must set Closed Captioning on the box,
not your TV.
Snowy picture
Your cable box may need a firmware upgrade. Please contact your Cable company.
Ghosting on picture
This is sometimes caused by compatibility issues with your cable box.
Try connecting Component cables instead.
English - 81
Problem
Possible Solution
Horizontal bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and power
indicator light blinks steadily.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
Image is not stable and may
appear to vibrate when you have
a computer connected to the PC
input.
If the setting is not correct, use your computer utility program to change the display settings.
Your TV supports multiscan display functions within the following frequency domain:
Horizontal frequency (kHz)
30~60
Vertical frequency (Hz)
60~75
PC Maximum refresh rate
(at 60 Hz)
1920 X 1080
Image is not centered on the
screen.
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
If a still image is displayed for
an extended period of time, residual
images or blurring may appear.
When you need to leave the monitor unused for an extended period of time, adjust the
settings so that the monitor automatically goes into energy saving mode or activates the
screen saver to display moving images..
The TFT LCD panel uses a panel consisting of sub pixels (3,147,264) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English - 82
Installing the Stand
<2>
<3>
1. Place the TV face down on a soft cloth or cushion on a table.
2. Put the stand into the hole at the bottom of the TV.
3. Insert screw into the hole indicated and tighten.
Disconnecting the Stand
<2>
<3>
1. Place the TV face down on a soft cloth or cushion on a table.
2. Remove four screws from the back of the TV.
3. Separate the stand from the TV.
4. Cover the bottom hole with a cap.
English - 83
<4>
Wall-Mount Adjustment (Sold separately)
Tras instalar el montaje en la pared, puede ajustar fácilmente la posición del televisor.
TV Rear Panel
Auto Wall-Mount
EX-LINK Cable (Not supplied)
TV
Entering the menu
1. Press the MENU button to display the menu.
3UHVVWKHŸRUźEXWWRQWRVHOHFW³6HWXS´WKHQSUHVVWKHENTER button.
2.3UHVVWKHŸRUźEXWWRQVWRVHOHFW³:DOO0RXQW$GMXVWPHQW´
then press the ENTER button.
3.$GMXVWWRWKHGHVLUHGSRVLWLRQXVLQJWKHŸźŻŹEXWWRQV
4. Press the EXIT button to exit.
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
Setup
Plug & Play
Language
Time
Game Mode
V-Chip
Caption
Menu TransParency
źMore
Move
TV
: English
: Off
: High
Enter
Return
Setup
ŸMore
)LOP0RGH
2II
Wall-Mount Adjustment
3,3
Function Help
: Off
SW Upgrade
When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.
Move
Enter
Wall Mount Adjusment
Position
Adjust
Using the Remote Control Buttons
Operations
Wall-mount angle
adjustment
Tilt Up, Tilt Down, Move right, Move left
Reset
Moves to the initial installation position
Remembering the
position and moving
to the remembered
position
Remembers 3 positions with the Red, Green and
Yellow buttons.
Moves to the remembered position using these 3
color buttons.
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
English - 84
1
INFO
2
Center
Ź
Ź
Ź
Ź
Ź
Return
Position1
Button
Ź
Ź
Ź
Ź
Ź
Ź
Ź
3
Exit
Wall Mount Kit Specifications ( VESA )
When attaching to other building materials, please contact your nearest dealer.
Product Family
inch
VESA Spec. (A * B)
Standard Screw (C * D)
Quantity
23~ 26
200 * 100
M4 * L10
4
32 ~ 40
200 * 200
M6 * L10
4
46 ~ 52
600 * 400
57
700 * 400
M8 * L15
4
42 ~ 50
600 * 400
63
No VESA
M8
6
LCD-TV
PDP-TV
We provided the standard dimensions for wall mount kits as shown in the table above.
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
Our 63” model does not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit
for this model.
English - 85
Using the Anti-Theft Kensington Lock
7KH.HQVLQJWRQORFNLVDGHYLFHXVHGWRSK\VLFDOO\¿[WKHV\VWHPZKHQXVLQJLWLQDSXEOLFSODFH7KHORFNLQJGHYLFHKDVWREHSXUFKDVHG
separately. The appearance and locking method may differ from the illustration depending on the manufacturer.
Please refer to the manual provided with the Kensington lock for proper use.
Cable
Figure 2
Figure 1
<Optional>
The place of the Kensington Lock may be different depending on its model.
1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a desk or a heavy stationary object.
English - 86
6SHFL¿FDWLRQV
Model Name
LN-T4061F
LN-T4661F
40 inches
46 inches
245 W
265 W
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W X 2
10W X 2
38.2 X 3.4 X 24.7 inches
(971 x 87.2 x 628 mm)
38.2 X 11.8 X 27 inches
(971 x 300 x 687 mm)
43.5 X 4.1 X 27.8 inches
(1106 x 104.2 x 706 mm)
43.5 X 12.8 X 30.2 inches
(1106 x 326 x 768 mm mm)
46.52 lbs (21.1kg)
39.24 lbs (17.8 kg)
65.26 lbs (29.6kg)
53.35 lbs (24.2kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
Screen Size (Diagonal)
Power Consumption
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With Stand
Without stand
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
Screen Size (Diagonal)
Power Consumption
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With Stand
Without stand
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
LN-T4065F
LN-T4665F
LN-T5265F
40 inches
46 inches
52 inches
245 W
265 W
320 W
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W X 2
10W X 2
10W X 2
40.9 X 3.8 X 24.2 inches
(1040.7 x 97 x 615.4 mm)
40.9 X 11.4 X 26.4 inches
(1040.7 x 290 x 671 mm)
46.3 X 4.5 X 27.3 inches
(1175.8 x 114 x 693.8 mm)
46.3 X 12.6 X 30 inches
(1175.8 x 320 x 761.4 mm)
52.2 X 4.8 X 31 inches
(1327 x 122 x 787.4 mm)
52.2 X 12.6 X 33.6 inches
(1327 x 320 x 854 mm)
47.62 lbs (21.6kg)
39.24 lbs (17.8kg)
67.90 lbs (30.8kg)
56.21 lbs (25.5kg)
81.79 lbs (37.1kg)
70.10 lbs (31.8kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
Stand Swivel (Left / Right)
ÛaÛ
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply, refer to the label attached to the product.
English - 87
This page is intentionally
left blank.
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Contacte con SAMSUNG WORLD-WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de
Atención al Cliente.
Country
Customer Care Center
Web Site
CANADA
1-800-SAMSUNG (7267864)
www.samsung.com/ca
U.S.A
1-800-SAMSUNG (7267864)
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
LN-T4061F
LN-T4065F
LN-T4661F
LN-T4665F
LN-T5265F
TFT-LCD TELEVISION
Owner’s
Instructions
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
BN68-01178A-00
· Model __________
· Serial No. ____________