LCD Monitor User Manual
A2258PW
www.aoc.com
©2013 AOC. All Rights Reserved.
TABLE OF CONTENT
SAFETY������������������������������������������������������������������������������������������������������������������������������������2
National Conventions��������������������������������������������������������������������������������������������������������������������2
Power������������������������������������������������������������������������������������������������������������������������������������������������3
Installation����������������������������������������������������������������������������������������������������������������������������������������4
Cleaning��������������������������������������������������������������������������������������������������������������������������������������������5
Other������������������������������������������������������������������������������������������������������������������������������������������������6
SETUP���������������������������������������������������������������������������������������������������������������������������������������7
Contents in Box������������������������������������������������������������������������������������������������������������������������������7
Adjusting Viewing Angle�����������������������������������������������������������������������������������������������������������������7
Connecting the Monitor���������������������������������������������������������������������������������������������������������������8
ADJUSTING����������������������������������������������������������������������������������������������������������������������������9
Setting Optimal Resolution����������������������������������������������������������������������������������������������������������9
Windows Vista��������������������������������������������������������������������������������������������������������������������������9
Windows 8����������������������������������������������������������������������������������������������������������������������������� 10
Windows ME/2000��������������������������������������������������������������������������������������������������������������� 11
OPERATING INSTRUCTIONS��������������������������������������������������������������������������������������� 12
Hotkeys������������������������������������������������������������������������������������������������������������������������������������������ 12
OSD Setting���������������������������������������������������������������������������������������������������������������������������������� 13
Luminance������������������������������������������������������������������������������������������������������������������������������� 14
Image Setup���������������������������������������������������������������������������������������������������������������������������� 15
Color Setup���������������������������������������������������������������������������������������������������������������������������� 16
Picture Boost������������������������������������������������������������������������������������������������������������������������� 17
OSD Setup������������������������������������������������������������������������������������������������������������������������������ 18
Extra����������������������������������������������������������������������������������������������������������������������������������������� 19
Exit������������������������������������������������������������������������������������������������������������������������������������������� 20
LED Indicator������������������������������������������������������������������������������������������������������������������������������� 20
STARTING WITH ANDROID������������������������������������������������������������������������������������������ 21
Customizing your Home Screen���������������������������������������������������������������������������������������������� 22
Viewing the Apps Gallery����������������������������������������������������������������������������������������������������������� 22
Browsing the Internet����������������������������������������������������������������������������������������������������������������� 22
Using the On-screen Keyboard������������������������������������������������������������������������������������������������ 23
Connecting to Network������������������������������������������������������������������������������������������������������������ 23
Adjusting the Settings for Android������������������������������������������������������������������������������������������ 24
DRIVER��������������������������������������������������������������������������������������������������������������������������������� 26
Monitor Driver���������������������������������������������������������������������������������������������������������������������������� 26
Windows 8����������������������������������������������������������������������������������������������������������������������������� 26
Windows 7����������������������������������������������������������������������������������������������������������������������������� 26
Windows Vista����������������������������������������������������������������������������������������������������������������������� 30
Windows ME�������������������������������������������������������������������������������������������������������������������������� 32
i-Menu�������������������������������������������������������������������������������������������������������������������������������������������� 33
e-Saver�������������������������������������������������������������������������������������������������������������������������������������������� 34
Screen+������������������������������������������������������������������������������������������������������������������������������������������ 36
TECHNICAL SUPPORT (FAQ)��������������������������������������������������������������������������������������� 37
Troubleshoot�������������������������������������������������������������������������������������������������������������������������������� 37
Error Message & Possible Solution������������������������������������������������������������������������������������������ 38
No Signal��������������������������������������������������������������������������������������������������������������������������������� 38
Input Not Support���������������������������������������������������������������������������������������������������������������� 38
APPENDIX��������������������������������������������������������������������������������������������������������������������������� 39
Plug and Play��������������������������������������������������������������������������������������������������������������������������������� 39
Specifications�������������������������������������������������������������������������������������������������������������������������������� 40
Touch Screen Specifications������������������������������������������������������������������������������������������������������ 40
Preset Display Modes����������������������������������������������������������������������������������������������������������������� 41
Pin Assignments���������������������������������������������������������������������������������������������������������������������������� 42
REGULATION��������������������������������������������������������������������������������������������������������������������� 43
FCC Notice���������������������������������������������������������������������������������������������������������������������������������� 43
WEEE Declaration����������������������������������������������������������������������������������������������������������������������� 44
WEEE Declaration for India������������������������������������������������������������������������������������������������������ 44
EPEAT Declaration���������������������������������������������������������������������������������������������������������������������� 45
SERVICE�������������������������������������������������������������������������������������������������������������������������������� 46
Warranty Statement for Europe���������������������������������������������������������������������������������������������� 46
Warranty Statement for North & South America (excluding Brazil)������������������������������ 48
1
SAFETY
NATIONAL CONVENTIONS
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in
italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer
system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells
you how to avoid the problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the
problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In
such cases, the specific presentation of the warning is mandated by regulatory authority.
2
POWER
The monitor should be operated only from the type of power source indicated on the
label. If you are not sure of the type of power supplied to your home, consult your dealer
or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding)
pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet
does not accommodate the three-wire plug, have an electrician install the correct outlet,
or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the
grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of
time. This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which
have appropriate configured receptacles marked between 19V, 3.42A
The wall socket shall be installed near the equipment and shall be easily accessible.
For use only with the attached power adapter (Output 19Vdc) which have UL,CSA listed
license (Only for monitors with power adapter). Manufacturers:
1) TPV ELECTRONICS(FUJIAN) CO., LTD model: ADPC1965
2) SHENZHEN HONOR ELECTRONICS CO., LTD. / model: ADS-65LSI-19-1 19065G
3
INSTALLATION
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the
monitor falls, it can injure a person and cause serious damage to this product. Use only
a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with
this product. Follow the manufacturer’s instructions when installing the product and use
mounting accessories recommended by the manufacturer. A product and cart combination
should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts
causing a fire or electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the
manufacturer and follow the kit instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be
inadequate hence overheating may cause a fire or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed
on the wall or with the stand:
Installed on the wall
11 7/8 inches
30cm
4 inches
10cm
4 inches
10cm
Leave at least this space
around the set.
4 inches
10cm
Installed with stand
11 7/8 inches
30cm
4 inches
10cm
4 inches
10cm
Leave at least this space
around the set.
4
4 inches
10cm
CLEANING
Clean the cabinet regularly with cloth.You can use soft-detergent to wipe out the stain,
instead of strong-detergent which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth
should not be too rough as it will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
5
OTHER
If the product is emitting a strange smell, sound or smoke, disconnect the power plug
IMMEDIATELY and contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during
operation.
Do not knock or drop the monitor during operation or transportation.
For display with glossy bezel the user should consider the placement of the display as the
bezel may cause disturbing reflections from surrounding light and bright surfaces.
6
SETUP
CONTENTS IN BOX
1.
2.
3.
4.
5.
6.
7.
8.
9.
LCD Monitor
CD Manual
Power Cord
Power Adapter
D-SUB cable
Audio cable
USB Cable (upstream)
Keyboard
Mouse
NOTE
• Not all signal cables (D-SUB, Audio, and USB cables) will be provided for all countries and regions. Please
check with the local dealer or AOC branch office for confirmation.
ADJUSTING VIEWING ANGLE
• For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust
the monitor’s angle to your own preference.
• Hold the stand so you will not topple the monitor when you change the monitor’s angle.
• You are able to adjust the tilted angle to 20° or 62°.
20°
62°
NOTE
• Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
7
CONNECTING THE MONITOR
Cable Connections In Back of Monitor and Computer:
10
9
11
8
7
6
5
1.
2.
3.
4.
5.
6.
USB port
USB port
Earphone out
Audio In
D-SUB Signal input
HDMI Signal input
1
2
3
4
7.
8.
9.
10.
11.
RJ45 (10/100Mbps)
Power input
SD
USB port
USB port
To protect equipment, always turn off the PC and LCD monitor before connecting.
1. Connect the power cable to the AC port on the back of the monitor.
2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other
end to the computer’s D-Sub port.
3. Optional – (Requires a video card with HDMI port) – Connect one end of the HDMI cable to
the back of the monitor and connect the other end to the computer’s HDMI port.
4. Turn on your monitor and computer.
5. Video content supporting resolution:VGA / HDMI: 1920 x 1080/60Hz (Maximum)
If your monitor displays an image, installation is complete. If it does not display an image, please
refer Troubleshooting on page 37.
8
ADJUSTING
SETTING OPTIMAL RESOLUTION
Windows Vista
1. Click START.
2. Click CONTROL PANEL.
3. Click Appearance and Personalization.
4. Click Personalization.
9
5. Click Display Settings.
6. Set the resolution SLIDE-BAR to 1920x1080.
Windows 8
1. Right click and click All apps at the bottom-right of the screen.
2. Set the “View by” to “Category”.
10
3. Click Appearance and Personalization.
4. Click DISPLAY.
5. Set the resolution SLIDE-BAR to 1920x1080.
Windows ME/2000
1.
2.
3.
4.
5.
6.
Click START.
Click SETTINGS.
Click CONTROL PANEL.
Double click DISPLAY.
Click SETTINGS.
Set the resolution SLIDE-BAR to 1920x1080.
11
OPERATING INSTRUCTIONS
HOTKEYS
• Connect the power cord and the video cable.
• Press the POWER key to turn on the monitor. The power indicator will light up.
7
1
2
3
4
5
6
For menu control
1.
MENU/ENTER
4.
AUTO / EXIT
2.
+ / up
5.
SOURCE
3.
- / down / Eco Mode
6.
BACK for Android
NOTE
• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight, or excessive dust or mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship
your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed
with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug
the monitor before cleaning it.
• Do not scratch the screen with hard things, it may cause permanent damage.
• Don’t leak liquid into monitor which will result in the damage of component.
12
OSD SETTING
Basic and simple instruction on the control keys.
Luminance
Image Setup
Color Setup
Picture Boost
Contrast
50
Gamma
Brightness
50
DCR
Off
i−Care
Off
Eco mode
1. Press the
Standard
OSD Setup
Extra
Exit
Gamma 1
(menu) key to display the control menu.
2. Press
(up) or
(down) to navigate through the menu items. Once the desired item is
highlighted, press the
(ENTER) key to activate it. If there is a sub-menu, press
(up) or
(down) to navigate through the sub-menu functions.
3. Press
(up) or
(down) to change the settings of the selected function. Press
to exit. If you want to adjust any other function, repeat steps 2-3.
(EXIT)
NOTE
• If the product has only one signal input, the item of “Input Select” is disabled.
• If the product screen size is 4:3 or input signal resolution is native resolution, the item of “Image Ratio” is
disabled.
• One of DCR, Color Boost, and Picture Boost functions is activated; the other two functions are turned
off accordingly.
13
Luminance
Luminance
Image Setup
Color Setup
Picture Boost
OSD Setup
Contrast
50
Gamma
Brightness
50
DCR
Off
i−Care
Off
Eco mode
Standard
(menu) to display menu.
2. Press
or
to select
3. Press
or
to select submenu, and press
4. Press
or
to adjust.
Main Menu
Luminance
Exit
Gamma 1
1. Press
5. Press
Extra
(Luminance), and press
(ENTER) to enter.
(ENTER) to enter.
(EXIT) to exit.
Sub Menu Item
Brightness
Contrast
Eco mode
Gamma
DCR
0-100
0-100
Description
Backlight Adjustment.
Contrast from Digital-register.
Standard
Standard Mode.
Text
Text Mode.
Internet
Internet Mode.
Internet
Game Mode.
Movie
Movie Mode.
Sports
Sports Mode.
Gamma 1
Gamma 2
Gamma 3
Off
Adjust to Gamma 1.
Adjust to Gamma 2.
Adjust to Gamma 3.
Disable dynamic contrast ratio.
On
Enable dynamic contrast ratio.
14
Image Setup
Image Setup
Color Setup
Picture Boost
OSD Setup
Extra
Clock
50
H. Position
50
Phase
50
V. Position
50
Sharpness
50
1. Press
(menu) to display menu.
2. Press
or
to select
3. Press
or
to select submenu, and press
4. Press
or
to adjust.
5. Press
Main Menu
Image Setup
(Image Setup), and press
Exit
Luminance
(ENTER) to enter.
(ENTER) to enter.
(EXIT) to exit.
Sub Menu Item
Clock
Phase
Sharpness
H.Position
V.Position
Description
Adjust picture Clock to reduce Vertical-Line noise.
Adjust Picture Phase to reduce Horizontal-Line noise.
Adjust picture sharpness.
Adjust the horizontal position of the picture.
Adjust the vertical position of the picture.
0-100
0-100
0-100
0-100
0-100
15
Color Setup
Color Setup
Picture Boost
OSD Setup
Extra
Exit
Color Temp.
Warm
Red
50
DCB Mode
Off
Green
50
DCB Demo
Off
Blue
50
1. Press
(menu) to display menu.
2. Press
or
to select
3. Press
or
to select submenu, and press
4. Press
or
to adjust.
5. Press
Main Menu
(Color Setup), and press
Luminance
Image Setup
(ENTER) to enter.
(ENTER) to enter.
(EXIT) to exit.
Sub Menu Item
Warm
Normal
Color Setup
Cool
sRGB
Color Setup
Red
Green
Blue
on or off
on or off
on or off
on or off
on or off
on or off
User
DCB Mode
Full Enhance
Nature Skin
Green Field
Sky-blue
AutoDetect
DCB Demo
16
Description
Recall Warm Color Temperature from
EEPROM.
Recall Normal Color Temperature from
EEPROM.
Recall Cool Color Temperature from
EEPROM.
Recall SRGB Color Temperature from
EEPROM.
Red Gain from Digital-register.
Green Gain Digital-register.
Blue Gain from Digital-register.
Disable or Enable Full Enhance Mode.
Disable or Enable Nature Skin Mode.
Disable or Enable Green Field Mode.
Disable or Enable Sky-blue Mode.
Disable or Enable AutoDetect Mode.
Disable or Enable Demo.
Picture Boost
Picture Boost
OSD Setup
Bright Frame
Frame Size
Extra
Off
50
Exit
50
H. Position
50
50
V. Position
50
2. Press
or
to select
3. Press
or
to select submenu, and press
4. Press
or
to adjust.
Picture Boost
(Picture Boost), and press
(ENTER) to enter.
(ENTER) to enter.
(EXIT) to exit.
Sub Menu Item
Frame Size
Brightness
Contrast
H. position
V. position
Bright Frame
Color Setup
Contrast
(menu) to display menu.
Main Menu
Image Setup
Brightness
1. Press
5. Press
Luminance
Description
Adjust Frame Size.
Adjust Frame Brightness.
Adjust Frame Contrast.
Adjust Frame horizontal position.
Adjust Frame vertical position.
Disable or Enable Bright Frame.
14-100
0-100
0-100
0-100
0-100
on or off
17
OSD Setup
OSD Setup
Extra
Language
English
Timeout
Exit
120
Luminance
Transparence
V. Position
0
Break Reminder
(menu) to display menu.
2. Press
or
to select
3. Press
or
to select submenu, and press
4. Press
or
to adjust.
Main Menu
OSD Setup
Color Setup
50
1. Press
5. Press
Image Setup
H. Position
(OSD Setup), and press
Picture Boost
25
Off
(ENTER) to enter.
(ENTER) to enter.
(EXIT) to exit.
Sub Menu Item
H. Position
V. Position
Timeout
Transparence
Language
Description
Adjust the horizontal position of OSD.
Adjust the vertical position of OSD.
Adjust the OSD Timeout.
Adjust the transparence of OSD.
Select the OSD language.
0-100
0-100
5-120
0-100
18
Extra
Extra
Exit
Luminance
Image Setup
Color Setup
Picture Boost
Input Select
Auto
Image Ratio
4:3
Resolution : 1024(H)X768(V)
Auto Config.
Yes
DDC/CI
Yes
H. Frequency : 60KHz
Off Timer
00
Reset
No
V. Frequency : 60Hz
1. Press
(menu) to display menu.
2. Press
or
to select
3. Press
or
to select submenu, and press
4. Press
or
to adjust.
5. Press
Main Menu
Extra
(Extra), and press
OSD Setup
(ENTER) to enter.
(ENTER) to enter.
(EXIT) to exit.
Sub Menu Item
Input Select
Auto Config
Off timer
Image Ratio
DDC-CI
Reset
Auto/Analog
yes or no
0-24hrs
wide or 4:3
yes or no
yes or no
Information
19
Description
Select input signal source.
Auto adjust the picture to default.
Select DC off time.
Select wide or 4:3 format for display.
Turn ON/OFF DDC-CI Support.
Reset the menu to default.
Show the information of the main image and subimage source.
Exit
Exit
Luminance
Image Setup
1. Press
(menu) to display menu.
2. Press
or
Main Menu
Exit
to select
Color Setup
(Exit), and press
Sub Menu Item
Exit
OSD Setup
(ENTER) to enter.
Description
Exit the main OSD.
LED INDICATOR
Status
Full Power Mode
Active-off Mode
Picture Boost
LED Color
White
Off
20
Extra
STARTING WITH ANDROID
This Smart Monitor is embedded with Android operating system, that it can work individually
without connecting a PC.
1. Press the
(source) key to display the source list.
2. Select [Android] and press
3. Press the
(ENTER) to confirm the selection.
(menu) key to display the selections.
D-SUB
HDMI
Android
The descriptions for function control:
Icon
Description
Shortcut for Google Search
Back to previous page
Back to Android Home Screen
Display recently used application
Application Gallery
Notification / Local Time / Settings
21
CUSTOMIZING YOUR HOME SCREEN
Adding application icons, shortcuts, or widgets to the home screen as your preference.You can also
change the wallpaper.
• Add an item to the Home Screen:
1. Click on the
icon to view the application gallery.
2. Select [APPS] or [WIDGETS].
3. Click and hold the item until it enlarged. Drag the item to the place you preferred on the
Home Screen.
• Move an item on the Home Screen:
1. Click and hold the item until it enlarged.
2. Drag the item to the place you preferred on the Home Screen.
• Remove an item from the Home Screen:
1. Click and hold the item until it enlarged. The Trash Can icon displayed.
2. Drag the item to the Trash Can icon to remove the item from the Home Screen.
VIEWING THE APPS GALLERY
1. Click on the
icon to view the applications.
2. Click on the application to open it.
3. Click on the
icon to return to the Home Screen, or click on the
icon to
return to the previous screen.
BROWSING THE INTERNET
• Open a webpage:
1. On the Home Screen, click
>
Browser.
2. Click the URL box at the top of the Browser. The on-screen keyboard displayed.
3. Enter the URL address to open the webpage.
• Set the homepage:
1. Click on the
icon at the top-right of the screen when browsing the web.
2. Edit the informations and click [OK] to bookmark this page.
3. Select [Settings] > [General] > [Set homepage] and select the [Current page] to set the
current page as your home page.
• Add to bookmark:
1. Click on the
icon at the right of the URL box when browsing the web.
2. Select [BOOKMARKS] > [Add bookmark] to add the current page to your bookmark.
22
USING THE ON-SCREEN KEYBOARD
• Enter text:
1. Click on a text filed. The on-screen keyboard opens.
2. Click on the keys to type.
Key
Description
Key
Description
Switch to upper case letters.
Switch to upper case letters.
Switch the keyboard language.
Switch to the symbol keyboard..
中文
English
Hide the on-screen keyboard.
CONNECTING TO NETWORK
• Turn on Wi-Fi and connect to the Wi-Fi network:
1. Click on the
open the sub-menu.
at the bottom-right of the screen. Click on the [Settings] to
2. Select [Wireless & networks], and check [Wi-Fi] to turn it on.
3. Select [Wi-Fi settings] > [Network notification] to scan for available Wi-Fi networks nearby.
The secured networks are indicated with a lock icon.
4. Touch a network to connect it automatically, or touch [Add Wi-Fi network] to add new
network manually.
5. If the network is open, touch [Connect] to confirm for connecting to the network on the
prompted window.
6. If the network is secured, enter the password and touch [Connect] on the prompted
window for connecting to the secured network.
• Set the Ethernet for network:
1. Click on the
open the sub-menu.
at the bottom-right of the screen. Click on the [Settings] to
2. Select [Ethernet configuration], and check [Ethernet] to turn on the Ethernet.
3. Select [Ethernet configuration] to open the setting menu.
4. Set the [Ethernet Devices], [Connection Type] and enter the network informations.
5. Click [Save] to confirm.
• Set the PPPoE for network:
1. Click on the
open the sub-menu.
at the bottom-right of the screen. Click on the [Settings] to
2. Select [PPPoE configuration] to open the setting menu.
3. Enter the [Input Account] and [Input Password], and then press [Connect] for connecting
the network.
23
ADJUSTING THE SETTINGS FOR ANDROID
Click on the
sub-menu.
at the bottom-right of the screen. Click on the [Settings] to open the
Settings
Ethernet configuration
NETWORKS
Ethernet configuration
Ethernet
Turn on Ethernet
DEVICE
Ethernet configuration
Sound
Configure Ethernet devices
Display
Storage
Apps
PERSONAL
Accounts & sync
Security
Language & input
Backup & reset
SYSTEM
Date & time
Accessibility
Developer options
About
Main Menu
NETWORKS
Sub Menu Item
Wi-Fi
Wireless & networks
Wi-Fi settings
Ethernet
Ethernet configuration
Ethernet configuration
PPPoE configuration
Description
Turn on or off the Wi-Fi.
Manage the Wi-Fi network. Search and connect to the
available networks.
Turn on or off the Ethernet.
Set the connection type and connect to the available
Ethernet.
Enter the account and password for connecting to the
network.
DEVICE
Sound
Display
Storage
Apps
Volume
Notifications
Sleep
Font size
Available spaces
Downloaded
On SD card
Running
All
Adjust the volume.
Set the notification ring tone.
Set the sleep timer.
Select the preferred font size.
View the available storage space.
View the downloaded applications.
Manage the applications stored on the SD card or internal
storage.
View the running applications.
View all the applications.
24
Main Menu
PERSONAL
Account & sync
Sub Menu Item
Screen security
Security
Password
Credential storage
Language & input
Select language
Backup & restore
Backup & reset
Personal Data
Description
Synchronize the informations from different accounts.
Set the screen lock.
Check for displaying the password while entering the
password.
Display the certificates.
Select the display language for your device and set the
keyboard settings.
Backup your data and settings.
Restore the backed up data when reinstall the application.
Erase all data from your devices, including your Google
account, system and application data and settings, and
downloaded applications.
SYSTEM
Automatic data & time
Date & time
Accessibility
Developer options
About
Set date
Set time
Select time zone
Use 24-hour format
Select date format
Services
System
User interface
Apps
System updates, Status,
Legal information,
Android version, Kernel
version, and Build
number.
Check for using the information form the network
automatically.
Unchecked for entering the information manually.
Set the date.
Set the time.
Select the time zone for current region.
Set the time format to 24-hour.
Select the preference date format.
Display the installed services.
Set the allowance for installing web scripts.
Set your preferred interface.
View the informations for the device.
25
DRIVER
MONITOR DRIVER
Windows 8
1.
2.
3.
4.
5.
6.
7.
8.
9.
Start Windows® 8
Right click and click All apps at the bottom-right of the screen.
Set the “View by” to “Large icons” or “Small icons”.
Click on the “Display” icon.
Click on the “Change display settings” button.
Click the “Advanced Settings” button.
Click the “Monitor” tab and then click the “Properties” button.
Click the “Driver” tab.
Open the “Update Driver Software-Generic PnP Monitor” window by clicking on
“Update Driver... “ and then click the “Browse my computer for driver software”
button.
10. Select “Let me pick from a list of device drivers on my computer”.
11. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following
directory:
X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
12. Select the “xxx.inf” file and click the “Open” button. Click the “OK” button.
13. Select your monitor model and click the “Next” button. The files will be copied from the CD
to your hard disk drive.
14. Close all open windows and remove the CD.
15. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Windows 7
1. Start Windows® 7
2. Click on the “Start” button and then click on “Control Panel”.
26
3. Click on the “Display” icon.
4. Click on the “Change display settings” button.
5. Click the“Advanced Settings”button.
27
6. Click the “Monitor” tab and then click the “Properties” button.
7. Click the “Driver” tab.
8. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on
“Update Driver... “ and then click the “Browse my computer for driver software”
button.
28
9. Select “Let me pick from a list of device drivers on my computer”.
10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following
directory:
X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
11. Select the “xxx.inf” file and click the “Open” button. Click the “OK” button.
12. Select your monitor model and click the “Next” button. The files will be copied from the CD
to your hard disk drive.
13. Close all open windows and remove the CD.
14. Restart the system. The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
29
Windows Vista
1. Click “Start” and “Control Panel”. Then, double-click on “Appearance and
Personalization”.
2. Click “Personalization” and then “Display Settings”.
3. Click “Advanced Settings...”.
30
4. Click “Properties” in the “Monitor” tab. If the “Properties” button is deactivated, it means
the configuration for your monitor is completed. The monitor can be used as is.
If the message “Windows needs...” is displayed, as shown in the figure below, click “Continue”.
5. Click “Update Driver...” in the “Driver” tab.
6. Check the “Browse my computer for driver software” checkbox and click “Let me pick
from a list of device drivers on my computer”.
7. Click on the “Have disk...” button, then click on the “Browse...” button and then select the
appropriate drive
F:\Driver (CD-ROM Drive).
8. Select your monitor model and click on the “Next” button.
9. Click “Close” > “Close” > “OK” > “OK” on the following screens displayed in sequence.
31
Windows 2000
1.
2.
3.
4.
5.
Start Windows® 2000.
Click on the “Start” button, point to “Settings”, and then click on “Control Panel”.
Double click on the “Display” Icon.
Select the “Settings” tab then click on “Advanced...”.
Select “Monitor”
- If the “Properties” button is inactive, it means your monitor is properly configured. Please
stop installation.
- If the “Properties” button is active. Click on “Properties” button. Please follow the steps
given below.
6. Click on “Driver” and then click on “Update Driver...” then click on the “Next” button.
7. Select “Display a list of the known drivers for this device so that I can choose a
specific driver”, then click on “Next” and then click on “Have disk...”.
8. Click on the “Browse...” button then select the appropriate drive F: (CD-ROM Drive).
9. Click on the “Open” button, then click on the “OK” button.
10. Select your monitor model and click on the “Next” button.
11. Click on the “Finish” button then the “Close” button.
If you can see the “Digital Signature Not Found” window, click on the “Yes” button.
Windows ME
1.
2.
3.
4.
5.
6.
7.
Start Windows® Me
Click on the “Start” button, point to “Settings”, and then click on “Control Panel”.
Double click on the “Display” Icon.
Select the “Settings” tab then click on “Advanced...”.
Select the “Monitor” button, then click on “Change...” button.
Select “Specify the location of the driver (Advanced)” and click on the “Next” button.
Select “Display a list of all the drivers in a specific location, so you can choose the
driver you want”, then click on “Next” and then click on “Have Disk...”.
8. Click on the “Browse...” button, select the appropriate drive F: (CD-ROM Drive) then click on
the “OK” button.
9. Click on the “OK” button, select your monitor model and click on the “Next” button.
10. Click on “Finish” button then the “Close” button.
32
I-MENU
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting
by using on screen menus instead of the OSD button on the monitor. To complete installation,
please follow the installation guide.
33
E-SAVER
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features
Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC
unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your
preferences (see example below).
Please click on “driver/e-Saver/setup.exe” to start installing the e-Saver software, follow the install
wizard to complete software installation.
Under each of the four PC statuses, you may choose the desired time (in minutes) from the pulldown menu for your monitor to automatically shutdown. The example below illustrated:
1.
2.
3.
4.
The monitor will never shutdown when the PC is powered on.
The monitor will automatically shutdown 5 minutes after the PC is powered off.
The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode.
The monitor will automatically shutdown 20 minutes after the screen saver appears.
You can click “RESET” to set the e-Saver to its default settings like below.
34
35
SCREEN+
Welcome to “Screen+” software by AOC. Screen+ software is a desktop screen splitting tool; it
splits the desktop into different panels, and each panel displays a different window.You only need
to drag the window to a corresponding panel when you want to access it. It supports multiple
monitor display to make your task easier. Please follow the installation software to install it.
36
TECHNICAL SUPPORT (FAQ)
TROUBLESHOOT
Problem & Question
Power LED is not on
No images on the screen
Picture Is Fuzzy & Has Ghosting
Shadowing Problem
Picture Bounces, Flickers Or Wave
Pattern Appears In The Picture
Monitor Is Stuck In Active Off-Mode”
Missing one of the primary colors
(RED, GREEN, or BLUE)
Possible Solution
• Make sure the power button is ON and the Power Cord is
properly connected to a grounded power outlet and to the
monitor.
• Is the power cord connected properly?
Check the power cord connection and power supply.
• Is the cable connected correctly?
(Connected using the D-sub cable) Check the DB-15 cable
connection.
(Connected using the DVI cable) Check the DVI cable
connection.
* DVI input is not available on every model.
• If the power is on, reboot the computer to see the initial screen
(the login screen), which can be seen.
If the initial screen (the login screen) appears, boot the computer
in the applicable mode (the safe mode for Windows ME/2000)
and then change the frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the
Service Center or your dealer.
• Can you see “Input Not Supported” on the screen?
You can see this message when the signal from the video
card exceeds the maximum resolution and frequency that the
monitor can handle properly. Adjust the maximum resolution and
frequency that the monitor can handle properly.
• Make sure the AOC Monitor Drivers are installed.
• Adjust the Contrast and Brightness Controls.
• Press to auto adjust.
• Make sure you are not using an extension cable or switch box.
We recommend plugging the monitor directly to the video card
output connector on the back.
• Move electrical devices that may cause electrical interference as
far away from the monitor as possible.
• Use the maximum refresh rate your monitor is capable of at the
resolution you are using.
• The Computer Power Switch should be in the ON position.
• The Computer Video Card should be snugly fitted in its slot.
• Make sure the monitor’s video cable is properly connected to
the computer.
• Inspect the monitor’s video cable and make sure no pin is bent.
• Make sure your computer is operational by hitting the CAPS
LOCK key on the keyboard while observing the CAPS LOCK
LED. The LED should either turn ON or OFF after hitting the
CAPS LOCK key.
• Inspect the monitor’s video cable and make sure that no pin is
damaged.
• Make sure the monitor’s video cable is properly connected to
the computer.
37
Problem & Question
Screen image is not centered or sized
properly
Picture has color defects
(white does not look white)
Horizontal or vertical disturbances on
the screen
Possible Solution
• Adjust H-Position and V-Position or press hot-key (AUTO).
• Adjust RGB color or select desired color temperature.
• Use Windows 95/98/2000/ME shut-down mode to adjust
CLOCK and PHASE.
• Press to auto-adjust.
CLOCK (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the
frequency is not correct, the screen shows vertical stripes and the picture has not correct width.
PHASE adjusts the phase of the pixel clock signal. With a wrong phase adjustment the picture has
horizontal disturbances in light picture.
For PHASE and CLOCK adjustment use “dot-pattern” or Windows XP/VISTA/7 shut-down mode
pattern.
ERROR MESSAGE & POSSIBLE SOLUTION
No Signal
1. Check that the signal-cable is properly connected. If the connector is loose, tighten the
connector’s screws.
2. Check the signal-cable’s connection pins for damage.
Input Not Support
Your computer has been set to unsuitable display mode, set the computer to display mode given in
the following table on page 34.
38
APPENDIX
PLUG AND PLAY
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.
It allows the monitor to inform the host system of its identity and, depending on the level of DDC
used, communicate additional information about its display capabilities.
The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID
information over the DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY,THERE
MUST BE A VIDEO INPUT SIGNAL.
This monitor meets the Green monitor standards as set by the Video Electronics Standards
Association (VESA) and The Swedish Confederation Employees (NUTEK). This feature is designed
to conserve electrical energy by reducing power consumption when there is no video-input
signal present. When there is no video input signal this monitor, following a time-out period,
will automatically switch to an Standby mode. This reduces the monitor’s internal power supply
consumption. After the video input signal is restored, full power is restored and the display is
automatically redrawn. The appearance is similar to a “Screen Saver” feature except the display is
completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse.
39
SPECIFICATIONS
Driving system
Size
Pixel Pitch
LCD Panel
21.5” TFT Color LCD
546.86mm diagonal
0.248mm(H) × 0.248mm(V)
R, G, B Analog Interface
Digital
H/V TTL
30kHz – 83kHz
56-75Hz
16.7M Colors
170MHz
1920 x 1080@60Hz
VESA DDC2B™
10/100Mbps
≤ 48W
≤ 0.5W
≤ 0.5W
D-Sub 15pin
HDMI 19pin
Analog: 0.7Vp-p(standard), 75 OHM, Positive
HDMI: 0.7Vp-p (standard), 75 OHM, Positive
Horizontal: 476.6mm
Vertical: 268.1mm
100~240VAC, 50/60Hz
Operating Temp: 0° to 40°C
Storage Temp.: -20° to 60°C
Operating Humidity: 15% to 90%
550.24(W)x328.11(H)x51(D)mm
5kg
48 Watts
CCC
Video
Input
Separate Sync.
H-Frequency
V-Frequency
Display Colors
Dot Clock
Max. Resolution
Plug & Play
LAN Speed
ON Mode
Standby Mode
OFF Mode
Power Consumption
Input Connector
Input Video Signal
Maximum Screen Size
Power Source
Environmental Considerations
Dimensions
Weight (N. W.):
Power Consumption (Max)
Regulatory Compliance
TOUCH SCREEN SPECIFICATIONS
Touch Technology
Touch Method
Stylus Diameter
Resolution
Accuracy
OS Compatibility
Optical Touch
Finger(s) / stylus
Minimum: 9 mm
+/- 2.5 mm over 95% of coverage
Multi-touch (plug & play)
Single touch + Gesture
Single touch + Gesture
Microsoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP
40
PRESET DISPLAY MODES
STANDARD
VGA
SVGA
XGA
WXGA+
WSXGA
HD
SXGA
***
HORIZONTAL
FREQUENCY (KHz)
VERTICAL
FREQUENCY (Hz)
640x480@60Hz
31.469
59.940
640x480@72Hz
37.861
72.809
640x480@75Hz
37.500
75.00
800x600@56Hz
35.156
56.250
800x600@60Hz
37.879
60.317
800x600@72Hz
48.077
72.188
800x600@75Hz
46.875
75.000
1024x768@60Hz
48.363
60.004
1024x768@70Hz
56.476
70.069
1024x768@75Hz
60.023
75.029
1440x900@60Hz
55.935
59.887
1440x900@75Hz
70.635
74.984
1680x1050@60Hz
65.290
59.954
1680x1050@60Hz
64.674
59.883
1920x1080@60Hz
67.500
60.000
1280x1024@60Hz
63.981
60.020
1280x1024@75Hz
79.976
75.025
1152x864@75HZ
67.500
75.000
1280x720@60HZ
44.772
59.855
31.469
70.087
31.469
70.087
RESOLUTION
IBM MODES
DOS
640x350@70Hz
DOS
720x400@70Hz
MAC MODES
VGA
640x480@67Hz
35.000
66.667
SVGA
832x624@75Hz
49.725
74.551
41
PIN ASSIGNMENTS
1
5
6
10
11
15
15 - Pin Color Display Signal Cable
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
19 17 15 13 11
18 16 14 12 10
DESCRIPTION
Red
Green
Blue
Ground
Detect Cable
R-Ground
G-Ground
B-Ground
9
7
8
5
6
3
4
PIN NO.
9.
10.
11.
12.
13.
14.
15.
DESCRIPTION
+5V
Ground
Ground
DDC-Serial Data
H-Sync
V-Sync
DDC-Serial Clock
PIN NO.
11.
12.
13.
14.
15.
16.
17.
18.
19.
DESCRIPTION
TMDS data Shield
TMDS data ckCEC
N.C
DDC SCL
DDC CLK
DDC/CEC Ground
+5 V Power
Hot Plug Detect
1
2
19 - Pin Color Display Signal Cable
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
DESCRIPTION
TMDS Data 2+
TMDS Data 2 Shield
TMDS Data 2TMDS data 1+
TMDS data 1 Shield
TMDS data 1TMDS data 0+
TMDS data 0 Shield
TMDS data 0TMDS data ck+
42
REGULATION
FCC NOTICE
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC
CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
The changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the
emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. It is the responsibilities of the user to correct such interference. It
is the responsibility of the user to correct such interference.
43
WEEE DECLARATION
Disposal of Waste Equipment by Users in Private Household in the European Union.
This symbol on the product or on its packaging indicates that this product must not be disposed
of with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information about where you can drop
off your waste equipment for recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
WEEE DECLARATION FOR INDIA
This symbol on the product or on its packaging indicates that this product must not be disposed
of with your other household waste. Instead it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment.
For more information about where you can drop off your waste equipment for recycling in India,
please visit the below web link.
www.aocindia.com/ewaste.php
44
EPEAT DECLARATION
EPEAT is a system to help purchasers in the public and private sectors evaluate, compare and select
desktop computers, notebooks and monitors based on their environmental attributes. EPEAT
also provides a clear and consistent set of performance criteria for the design of products, and
provides an opportunity for manufacturers to secure market recognition for efforts to reduce the
environmental impact of its products.
AOC believes in protecting the environment.
With a key concern for the conservation of natural resources, as well as landfill protection, AOC
announces the launch of AOC monitor’s packaging recycling program. This program is designed to
help you discard of your monitor carton and filler materials properly. If a local recycling center is
not available, AOC will recycle the packaging material for you, including foam filler and carton. AOC
Display solution will only recycle AOC monitor packaging. Please refer to the following website
address:
Only for North and South American, excluding Brazil:
http://us.aoc.com/about/environmental_impact
For Germany:
http://www.aoc-europe.com/en/service/tco.php
For Brazil:
http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134
45
SERVICE
WARRANTY STATEMENT FOR EUROPE
LIMITED THREE-YEAR WARRANTY*
AOC Color Monitors sold within Europe
AOC International (Europe) GmbH warrants this product to be free from defects in material and
workmanship for a period of Three (3) years after the original date of consumer purchase. During
this period, AOC International (Europe) GmbH will, at its option, either repair the defective product
with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as
*stated below. The defective products that are replaced become the property of AOC International
(Europe) GmbH.
If the product appears to be defective, please contact your local dealer or refer to the warranty
card when attached to the product.
Deliver the product freight pre-paid, along with the dated proof of purchase, to the AOC
Authorized Service Center. If you cannot deliver the product in person:
•
•
•
•
•
Pack it in its original shipping container (or equivalent)
Put the RMA number on the address label
Put the RMA number on the shipping carton
Insure it (or assume the risk of loss/damage during shipment)
Pay all shipping charges
AOC International (Europe) GmbH is responsible neither for any damage or loss during inbound
transport damage nor to inbound product that was not properly packaged.
AOC International (Europe) GmbH will pay the return shipping charges within one of the countries
specified within this warranty statement. AOC International (Europe) GmbH is not responsible for
any costs associated with the transportation of product across international borders. This includes
the international border within the European Union.
* This limited warranty does not cover any losses or damages that occur as a result of
•
•
•
•
•
•
Shipping or improper installation or maintenance
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repair, modification, or installation of options or parts by anyone other than an AOC
Authorized Service Center
• Improper environment
• Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or
other irregularities
46
This limited warranty does not cover any of the product firmware or hardware that you or any
third party have modified or altered; you bear the sole responsibility and liability for any such
modification or alteration.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE
LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM
THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED
OR IMPLIED) APPLY AFTER THIS PERIOD.
AOC INTERNATIONAL (EUROPE) GMBH OBLIGATIONS AND YOUR REMEDIES HEREUNDER
ARE SOLELY AND EXCLUSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE)
GMBH LIABILITY, WHETHER BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY,
OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT
WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC
INTERNATIONAL (EUROPE) GMBH BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE
OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM COUNTRY TO COUNTRY.
THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE MEMBER
COUNTRIES OF THE EUROPEAN UNION.
Information in this document is subject to change without notice.
For more details, please visit: http://www.aoc-europe.com/en/service/index.php
47
WARRANTY STATEMENT FOR NORTH & SOUTH AMERICA
(EXCLUDING BRAZIL)
WARRANTY STATEMENT
for AOC Color Monitors
Including those Sold within North America as Specified
Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship
for a period of three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after
the original date of consumer purchase. During this period, EPI ( EPI is the abbreviation of Envision
Peripherals, Inc. ) will, at its option, either repair the defective product with new or rebuilt parts, or
replace it with a new or rebuilt product at no charge except as *stated below. The parts or product
that are replaced become the property of EPI.
In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized
Service Center closest to your area. Deliver the product freight pre-paid, along with the dated
proof of purchase, to the EPI Authorized Service Center. If you cannot deliver the product in
person:
•
•
•
•
•
Pack it in its original shipping container (or equivalent)
Put the RMA number on the address label
Put the RMA number on the shipping carton
Insure it (or assume the risk of loss/damage during shipment)
Pay all shipping charges
EPI is not responsible for damage to inbound product that was not properly packaged.
EPI will pay the return shipment charges within one of the countries specified within this warranty
statement. EPI is not responsible for any costs associated with the transportation of product across
international borders. This includes the international borders of the countries within this warranty
statements.
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department
at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.
com/na-warranty.
* This limited warranty does not cover any losses or damages that occur as a result of:
•
•
•
•
•
•
Shipping or improper installation or maintenance
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repair, modification, or installation of options or parts by anyone other than an EPI Authorized
Service Center
• Improper environment
• Excessive or inadequate heating or air conditioning or electrical power failures, surges, or
other irregularities
48
This three-year limited warranty does not cover any of the product’s firmware or hardware that
you or any third party have modified or altered; you bear the sole responsibility and liability for any
such modification or alteration.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE
LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND
ONE (1) YEAR FOR CRT TUBE OR LCD PANEL FROM THE ORIGINAL DATE OF CONSUMER
PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.
IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY
TO YOU.
EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS
STATED HERE. EPI’ LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT
LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT
WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION
PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES
OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. IN
THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS.YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
In the United States of America, this limited warranty is only valid for Products purchased in the
Continental United States, Alaska, and Hawaii.
Outside the United States of America, this limited warranty is only valid for Products purchased in
Canada.
Information in this document is subject to change without notice.
For more details, please visit:
•
•
•
•
•
•
•
•
•
•
•
•
•
USA: http://us.aoc.com/support/find_service_center
ARGENTINA: http://ar.aoc.com/support/find_service_center
BOLIVIA: http://bo.aoc.com/support/find_service_center
CHILE: http://cl.aoc.com/support/find_service_center
COLOMBIA: http://co.aoc.com/support/find_service_center
COSTA RICA: http://cr.aoc.com/support/find_service_center
DOMINICAN REPUBLIC: http://do.aoc.com/support/find_service_center
ECUADOR: http://ec.aoc.com/support/find_service_center
EL SALVADOR: http://sv.aoc.com/support/find_service_center
GUATEMALA: http://gt.aoc.com/support/find_service_center
HONDURAS: http://hn.aoc.com/support/find_service_center
NICARAGUA: http://ni.aoc.com/support/find_service_center
PANAMA: http://pa.aoc.com/support/find_service_center
49
•
•
•
•
•
PARAGUAY: http://py.aoc.com/support/find_service_center
PERU: http://pe.aoc.com/support/find_service_center
URUGUAY: http://pe.aoc.com/support/find_service_center
VENEZUELA: http://ve.aoc.com/support/find_service_center
IF COUNTRY NOT LISTED: http://latin.aoc.com/support/find_service_center
50